fasset skills development€¦ · web view20359 7 institute of internal auditors (iia) mr lawrence...

Introduction to the Role of the SDF

April 2009

Facilitated byAndrea van der Westhuizen

Handbook

The views expressed in this document are not necessarily those of Fasset’s.

INDEX

ACRONYMS............................................................................................................................................................3

SECTION 1: UNDERSTANDING THE STRUCTURES & RELATIONSHIPS BETWEEN SAQA AND SDA LEGISLATION..............................................................................................................................................5

1. THE SOUTH AFRICAN QUALIFICATIONS ACT....................................................................................51.1 What is the NQF?..................................................................................................................................61.2 Fields of Learning.................................................................................................................................71.3 Objectives of the NQF...........................................................................................................................81.4 Principles of the NQF...........................................................................................................................81.5 Proposed Changes to the NQF.............................................................................................................9

2. WHAT IS THE SOUTH AFRICAN QUALIFICATIONS AUTHORITY (SAQA).............................................112.1 Standards Setting................................................................................................................................122.2 Quality Assurance...............................................................................................................................12

3. SKILLS DEVELOPMENT ACT (SDA)...............................................................................................143.1 Legislation Changes........................................................................................................................15

4. THE SKILLS DEVELOPMENT LEVIES ACT, 1999..............................................................................154.1 Setas....................................................................................................................................................16

5. THE NATIONAL PICTURE...............................................................................................................176. INTERPRETING LEGISLATION.........................................................................................................18

SECTION 2: ASSESSMENT & THE NQF.......................................................................................................19

1. UNIT STANDARDS & QUALIFICATIONS............................................................................................191.1 Defining Unit Standards.....................................................................................................................191.2 Components of a Unit Standard..........................................................................................................191.3 Finding Unit Standards.......................................................................................................................221.4 Qualifications......................................................................................................................................221.5 Skills Programmes..............................................................................................................................24

2. WHAT IS ASSESSMENT?...............................................................................................................242.1 What is Competence?..........................................................................................................................242.2 Forms of Assessment...........................................................................................................................25

3. WHAT IS RECOGNITION OF PRIOR LEARNING (RPL)?....................................................................26

SECTION 3: DEVELOPING THE STRATEGIC ROLE OF THE SDF.......................................................27

1. SKILLS DEVELOPMENT FACILITATOR.............................................................................................271.1 Appointment of an SDF.......................................................................................................................271.2 Function of an SDF.............................................................................................................................271.3 SDF Unit Standards............................................................................................................................281.4 The Association of Skills Development Facilitators of South Africa (ASDFSA)................................281.5 South African Board of Personnel Practitioners (SABPP).................................................................291.6 American Society for Training and Development (ASTD)..................................................................29

2. THE TRAINING COMMITTEE...........................................................................................................292.1 Role of the Training Committee..........................................................................................................302.2 Constitution of the Training Committee..............................................................................................312.3 Scope of a Committee..........................................................................................................................312.4 Objectives............................................................................................................................................31

SECTION 4: DEVELOPING AND IMPLEMENTING A WSP.....................................................................33

1. UNDERSTANDING THE DEVELOPMENT OF A SKILLS PLAN...............................................................331.1 Benefits of Planning............................................................................................................................331.2 Planning Process................................................................................................................................33

2. COMPLETING AND SUBMITTING THE DOCUMENTATION....................................................................362.1 Reporting on Training Implemented...................................................................................................362.2 Workplace Skills Plan - Reporting on Planned Training....................................................................372.3 Important Notes...................................................................................................................................372.4 OFO Codes & Occupational Categories............................................................................................37

SECTION 5: LEVIES, GRANTS AND FASSET-FUNDED INTERVENTIONS.........................................43

1. WHEN WILL YOU PAY THE LEVY?...................................................................................................432. EMPLOYERS QUALIFYING TO PAY SDL..........................................................................................43

Introduction to the Role of the SDF Handbook (2009) 1

2.1 Am I paying my Skills Development Levy?.........................................................................................432.2 To which Seta should I pay my SDL?..................................................................................................432.3 Where does your money go?...............................................................................................................44

3. EMPLOYERS EXEMPT FROM PAYING THE SDL................................................................................454. CLAIMING GRANTS....................................................................................................................... 45

4.1 Mandatory Cash Grant.......................................................................................................................454.2 Strategic Cash Grant...........................................................................................................................464.3 Learnership Cash Grant.....................................................................................................................46

5. UNCLAIMED LEVIES...................................................................................................................... 485.1 ABET Programme...............................................................................................................................485.2 Fasset’s Development Projects...........................................................................................................485.3 Free Training Events – Lifelong Learning..........................................................................................50

6. MONITORING GRANT PAYMENTS FROM FASSET.............................................................................51

SECTION 6: UNDERSTANDING LEARNERSHIPS.....................................................................................53

1. WHAT IS A LEARNERSHIP?...........................................................................................................531.1 Characteristics of a Learnership........................................................................................................531.2 Why Learnerships?..............................................................................................................................531.3 Benefits of Learnerships......................................................................................................................541.4 Learnerships vs. Apprenticeships........................................................................................................54

2. LEARNERSHIPS AVAILABLE...........................................................................................................54

SECTION 7: IMPLEMENTING AND MANAGING LEARNERSHIPS......................................................60

1. EMBARKING ON A LEARNERSHIP...................................................................................................601.1 Selecting a Learner.............................................................................................................................60

2. ENROLLING LEARNERS ONTO A LEARNERSHIP...............................................................................602.1 Learnership Agreement.......................................................................................................................612.2 Registering the Learner on the Learnership.......................................................................................63

3. RUNNING THE LEARNERSHIP.........................................................................................................633.1 Supporting the Learner.......................................................................................................................633.2 Reporting and Administration.............................................................................................................64

REFERENCES......................................................................................................................................................64

Handy Resources...................................................................................................................................................65


Acronyms

Acronym Name

ASTD American Society for Training and Development

AAT Associate Accounting Technician

AAT Association of Accounting Technicians

ABET Adult Basic Education and Training

ACCA Association of Chartered Certified Accountants

ANC African National Congress

ASDFSA Association of Skills Development Parishioners of South Africa

ATR Annual Training Report

BEE Black Economic Empowerment

CA Chartered Accountant

CAT Certified Accounting Technician

CCFO Critical Cross Field Outcome

CHE Council on Higher Education

CIMA Chartered Institute of Management Accountants

CTA Certificate in the Theory of Accounting

DA Democratic Alliance

DoL Department of Labour

ETQA Education and Training Quality Assurance body

Fasset SETA for Finance, Accounting, Management Consulting and other Financial Services

FassetQA Fasset Quality Assurance Authority

FET Further Education and Training

GET General Education and Training

HEQF Higher Education Qualifications Framework

HEQC Hither Education Quality Committee

HET Higher Education and Training

HR Human Resources

GFETQF General and Further Education and Training Qualifications Framework

ICB Institute of Certified Bookkeepers

LCG Learnership Cash Grant

NLP Non Levy Payer

NLRD National Learner Record Database


Acronym Name

NQF National Qualifications Framework

NSA National Skills Authority

NSB National Standards Bodies

NSDS National Skills Development Strategy

NSF National Skills Framework

OFO Organising Framework for Occupations

OLS Occupational Learning System

OQF Occupational Qualifications Framework

PAYE Pay as you Earn

QAP Quality Assurance Partner

QCTO Quality Council for Trades and Occupations

QE Qualifying Examination

RPL Recognition of Prior Learning

RSA Republic of South Africa

SABPP South African Board of Personnel Practitioners

SAICA South African Institute of Chartered Accountants

SAIPA South African Institute of Professional Accountants

SAQA South African Qualifications Authority

SARS South African Revenue Service

SCG Strategic Cash Grant

SDA Skills Development Act

SDF Skills Development Facilitator

SDL Skills Development Levy

SDLA Skills Development Levies Act

SDPU Skills Development Planning Unit

SETA Sector Education and Training Authority

SGB Standards Generating Body

SIC Standard Industrial Classification

SMME Small, Medium and Micro Enterprise

SSP Sector Skills Plan

UFH University of Fort Hare

UJ University of Johannesburg

WSP Workplace Skills Plan


Section 1: Understanding the Structures & Relationships between SAQA and SDA Legislation

The South African government realized, in the early 90’s, that if a country would like to experience

economic growth, they had to utilize their citizens and in order to do this, training would be of the

utmost importance.

In 1992 eight working groups were established and charged with developing a new national training

strategy.

The working groups had representation from trade unions, employers, the State, providers of

education and training, the African National Congress (ANC) Education Department, and the

Democratic Alliance (DA). Working Group 2 reached agreement on a new integrated framework and

1994 saw the publication of three documents which laid the foundation for the South African

Qualifications Authority (SAQA) Act (RSA, 1995).

1. The South African Qualifications Act

The South African Qualifications Authority Act No. 58 (SAQA Act) was published in 1995 and

stipulated:

the development and implementation of the National Qualifications Framework (NQF) and

the establishment of the SAQA, a body who would be responsible for the development and

implementation of the NQF.

The new National Qualifications Framework Act No 67 of 2008 was legislated in March 2009, but at

the time of publication of this manual, none of its associated regulations were yet legislated.

This new Act provides for the National Qualifications Framework and the South African Qualifications

Authority as originally set out in The SAQA Act. It also provides for the responsibilities of Ministers,

Quality Councils and for transitional arrangements.

It is closely based on the SAQA Act and thus we will examine this Act too. However, strictly speaking

it repeals this Act and replaces it.

We will first investigate the NQF.


1.1 What is the NQF?

The NQF can be seen as an integrated framework of all qualifications and components of

qualifications at all levels. This has led to the NQF being compared to a ladder. The NQF covers

many possible learning and career paths, which include all forms of education and training and each

step in the ladder represents progress. In that way the ladder is designed to make it easier for people

to move upwards in their career paths. (Cloete, 2005)

We can go further by saying that each step of the ladder is governed by principles and guidelines that

standardise the learning that takes place at that step or level. The NQF is a structure used to

establish a common understanding of learning achieved. The NQF has won wide acceptance as the

principal instrument through which national education and training qualifications are recognised and

quality assured.

1.1.1 Structure of the NQF

The NQF consists of three bands and now has 10 levels as can be seen in Figure 1.1 – we will see the

implementation of these 10 levels during the course of 2009.

QUALIFICATION AND CERTIFICATES INSTITUTIONS

Higher Education &

Training(HET)

10 DoctoratesTertiary / Research / Professional Instructions

9 Masters Degrees

8 Post graduate diplomas and Professional Qualifications

Universities / Technikons / Colleges / Private / Professional Institutions / Workplace / etc.

7 Bachelors Degrees and Advanced Diplomas

6 Diplomas and Advanced certificates

5 Higher Certificates and Advanced National (vocational) Certificates.

Further Education &

Training(FET)

4Std 10 / Grade 12, N3 / NCS

National Senior Certificate and National (vocational) Certificates. Formal high

schools / Private / State

schools

Technical / Community /

Police / Nursing / Private colleges

Industry Training Boards / Unions /

Workplace, etc

3 Std 9 / Grade 11, N2 / NICNational (vocational) Certificates.

2Std 8 / Grade 10

Further Education and Training Certificates.

General Education &

Training(GET)

1

Senior Phase, Std 7 / Grade 9

ABET Level 4

Formal schools (Urban / Rural / Farm / Special)

Occupation / Work-based

training / Upliftment

programmes / Community

programmes

NGOs / churches /

Night schools/ ABET

programmes / Private

providers/ Industry training boards / Unions/

Workplace, etc

Intermediate Phase ABET Level 3

Foundation Phase ABET Level 2

Pre-School ABET Level 1

Figure 1.1: Structure of the NQF


Each NQF level represents a step of the ladder used as an example earlier. It is clear from this

structure that provision has been made for progression (moving from one level to the next). Provision

has also been made for horizontal articulation between qualifications. (Rainbow SA, The National

Skills Development Handbook)

NQF Level 1 is the basic amount of compulsory education which everyone in the country should have.

It fits into what is called the General Education and Training Band (GET sector).

NQF Levels 2 – 4 represent additional education that takes place below university or tertiary education

level. It is called the Further Education and Training band (FET sector). (Rainbow SA, The National

Skills Development Handbook)

From NQF Level 5 - 10 is the Higher Education & Training (HET) sector. Education and training at

these levels can be achieved through tertiary education (at universities/technikons) or through

workplace providers and private training institutions.

1.2 Fields of Learning

There are 12 different fields of learning within the NQF. All unit standards and qualifications are

categorized across these areas of learning:

1. Agriculture and Nature Conservation

2. Culture and Arts

3. Business, Commerce and Management Studies

4. Communication Studies and Language

5. Education, Training and Development

6. Manufacturing, Engineering and Technology

7. Human and Social Studies

8. Law, Military Science and Security

9. Health Science and Social Services

10. Physical, Mathematical, Computer and Life Sciences

11. Services

12. Physical Planning and Construction

Unit standards specify the outcomes that a learner will need to achieve by indicating: What a learner must be able to do, How well they must do it and Within what parameters (scope or context) it must be done.

Qualifications are made up of a number or unit standards equaling a minimum of 120 credits. Each qualification will however specify the amount of credits required to obtain that specific qualification.


1.3 Objectives of the NQF

The SAQA Act listed five objectives of the NQF. These objectives aim to overcome the challenges

faced due to the legacy of the previous education and training system.

Objectives of the NQF:

To create an integrated national framework for learning achievements,

To facilitate access to, and mobility and progression within education, training and career

paths,

To enhance the quality of education and training,

To accelerate the redress of past unfair discrimination in education, training and employment

opportunities and thereby,

To contribute to the full personal development of each learner and the social and economic

development of the nation at large.

The NQF Act of 2008 also makes provision for and recognition of professional bodies—their role in

the system will be to develop qualifications and quality assure programmes in their fields of expertise.

Professional bodies will work very closely with sector quality councils where relevant.

1.4 Principles of the NQF

The principles and guidelines of the NQF is based on, are grounded in:

The eradication of injustice,

The achievement of reconstruction and development goals and

The transformation and the promotion of quality in education and training (SAQA, 2001).

The following principles underpin the objectives of the NQF and contribute to the benefits of the NQF:

Principle DescriptionIntegration Education and training should form part of a system of human

resources development which provides for the establishment of an underlying approach to education and training.

Relevance Education and training should be, and remain, responsive to national development needs.

Credibility Education and training should have international and national value and acceptance.

Coherence Education and training should work within a consistent framework of principles and certification.

Flexibility Education and training should allow for multiple pathways to the same learning ends.

Standards Education and training should be expressed in terms of a nationally agreed framework and internationally acceptable outcomes.

Legitimacy Education and training should provide for the participation of all national stakeholders in the planning and co-ordination of standards


Principle Descriptionand qualifications.

Access Education and training should provide ease of entry to appropriate levels of education and training for all prospective learners in a manner which facilitates progression.

Articulation Education and training should provide for learners, on successful completion of accredited prerequisites, to move between components of the delivery system.

Progression Education and training should ensure that the framework of qualifications permits individuals to move through the levels of national qualifications via different appropriate combinations of the components of the delivery system.

Portability Education and training should enable learners to transfer credits of qualifications from one learning institution and/or employer to another.

Recognition of Prior Learning

Education and training should, through assessment, give credit to learning which has already been acquired in different ways.

Guidance of Learners Education and training should provide for counselling of learners by specially trained individuals who meet nationally recognised standards for educators and trainers.

1.5 Proposed Changes to the NQF

The new National Qualifications Framework Act No 67 of 2008 was legislated in March 2009, but at

the time of publication of this manual, no regulations were yet legislated.

This new Act provides for the National Qualifications Framework, the responsibilities of Ministers and

for the South African Qualifications Authority. It also provides for Quality Councils and for transitional

arrangements. It repeals the South African Qualifications Authority Act of 1995.

According to this new act, some significant changes to the NQF have come into being. These are

discussed below.

The main features of the new NQF Act that distinguish it from the SAQA Act are:

1. The NQF—The initial SAQA Act of 1995 did not describe the NQF as it had not yet been

established. The new NQF Act contains such a description clarifying the notion of an NQF and

the way it is organised (including its sub frameworks). The change of name from the “SAQA Act”

to the “NQF Act” reflects this transferral.

2. SAQA’s role—The SAQA Act gave SAQA the task of conceptualizing the NQF and leading its

implementation. Due to the degree of centralization and conceptual and procedural inflexibility the

NQF Act secures an apex role for SAQA as the custodian of the values of the NQF, research

organisation, learning database manager and advisor on the entire NQF system. SAQA will also

work very closely with the three sectoral quality assurance bodies in fulfilling the objectives of the

NQF.


3. Simplification—The SAQA Act sanctioned SAQA to recognise and utilize substructures to carry

out the design of standards and qualifications and to undertake quality assurance. Thus NQF

processes became complicated with overlapping directives. The NQF Act names three quality

assurance councils with clear lines of accountability and specific requirements for collaboration

and dispute resolution.

4. Sectors not BANDS—The SAQA Act formalized the concept of the NQF bands as an organising

principle.

1.5.1 Overview of the Changes to the NQF

SAQA continues to exist as the apex body in education and training quality assurance with many of its

functions unchanged.

South Africa now has three National Qualifications Frameworks:

The Higher Education Qualifications Framework (HEQF) – already gazetted on 5 Oct

2007,

The General and Further Education and Training Qualifications Framework (GFETQF),

The Occupational Qualifications Framework (OQF).

The OLS is primarily focused on work related training in the NQF. Academic learning and the primary

– secondary school systems (in the GFETQF) are not directly affected by the OLS. The OLS takes

place in a new sub-framework of the NQF dedicated to occupational learning. The other sub-

frameworks contain the higher education system, and the general and further education systems

(schools and FET colleges).

The three Qualification Frameworks will still be part of one NQF. The 8 levels of the NQF have been

increased to 10.

Each of the three frameworks has a responsible quality assurance council:

The Council on Higher Education (CHE), with its Higher Education Quality Committee

(HEQC),

Umalusi for general and further education,

Quality Assurance Council for Trades and Occupations (QCTO) – new body responsible

for the quality assurance of occupational qualifications.

Qualification Framework Quality Council

Higher Education Qualifications Framework (HEQF)

Council on Higher Education (CHE) with its Higher Education Quality Committee (HEQC)

General and Further Education and Training Qualifications Framework (GFETQF) Umalusi

Occupational Qualifications Framework (OQF) Quality Council for Trades and Occupations (QCTO)


At this stage it is foreseen that the QCTO will delegate specific quality assurance activities to suitable

agencies, primarily the Setas (Sector Education Training Authorities) and other bodies who choose to

work with the QCTO. These bodies can include professional bodies such as South African Institute of

Chartered Accountants (SAICA) who currently has a quality assurance function. Many Setas have

been fulfilling this quality assurance role since their inception in 2000, and so the continued use of

these systems and processes will assist to maintain the momentum already gained by these

Education Training Quality Assurance Bodies (ETQAs).

Fasset will keep you up-to-date on developments through their website and newsletter.

Figure 1.2: The new Organisational Learning System (courtesy of Rainbow SA – The National Skills

Handbook 2009)

2. What is the South African Qualifications Authority (SAQA)

SAQA was established to oversee the NQF’s implementation and development.

SAQA has two aims:

Standards Setting – responsible for overseeing the development of the NQF,

Quality Assurance – oversees the implementation of the NQF.


SAQA has been commissioned with both broad and specific functions. The broad functions focus on

strategic planning and budgets that will channel the NQF, as well as the development of a system of

collaboration between SAQA and the mandates of the Quality Councils (QCs).

SAQA’s specific functions on the advice of the QCs include:

1. Recommending level descriptors to the Minister - ensuring their relevancy (level descriptors

are statements describing learning achievement at a particular level on the NQF),

2. Preparing policy frameworks that will guide the operations of the QCs (qualifications,

assessment, RPL, quality assurance, credit accumulation and transfer, recognition of

professional bodies and the registration of professional designations),

3. The maintenance of the National Learner Records Database (NLRD),

4. The evaluation of foreign qualifications and public information on the NQF.

2.1 Standards Setting

Standards Generating Bodies (SGBs) are currently responsible for the generation of unit standards

and qualification. In the future (as per the NQF Act) the Standards Setting directorate will be

responsible for creating unit standards and qualifications through bodies known as the standards advisory panels.

2.2 Quality Assurance

The QCTO’s Quality Assurance Directorate will be responsible for ensuring the delivery of high quality

training and education. This function is currently executed by professional body and Seta ETQAs.

2.2.1 ETQAs (Education and Training Quality Assurance bodies)

An ETQA is a body that is responsible for ensuring the quality of the delivery and assessment of

registered standards and qualifications by providers in its relevant sector. 33 ETQAs are currently

accredited by SAQA, of which Fasset is one. The full list can be found on SAQA’s website

(www.saqa.org.za) under ‘Accredited ETQAs’.

The current function of an ETQA is to:

Accredit providers to conduct assessments against unit standards and qualifications

registered on the NQF,

Promote quality amongst constituent providers,

Monitor provision of training – conduct quality audits at specified intervals,

Evaluate assessment and facilitate moderation among constituent providers,

Register assessors,

Certificate learners,

Co-operate with relevant moderating bodies,


Recommend new standards or qualifications to National Standards Bodies (NSBs),

Recommend modifications to existing standards and qualifications to NSBs,

Submit reports to SAQA (SAQA, 2007).

SAQA accredits ETQAs and monitors and audits them in order to assure the quality of the execution of

the above functions. The ETQA function is executed by:

Setas,

Professional Bodies, e.g. SAICA,

The Higher Education Quality Committee (HEQC),

Umalusi.

2.2.2 Fasset’s ETQA

The Fasset Seta ETQA (FassetQA) was accredited by SAQA in September 2001. FassetQA’s

submission was prepared on a consultative basis with all stakeholders, including professional bodies.

This process included workshops and one-to-one sessions with professional institutes. The aim was

to minimize duplication, build a coherent system of quality control and encompass all quality aspects

of the sector.

Fasset’s strategy to carry out its mandate in accordance with its accredited quality assurer status

may be summarized as follows:

1. Department of Labour (DoL) sets out targets for the Seta every five years

2. Fasset interprets these targets and how they will be achieved

3. Fasset Management Board strategy planning takes place annually in August

4. All information is made public and people can contact the board member who represents their

constituency or stakeholder representative to submit their proposal to the board on their

behalf

5. The board will then consider it if it is aligned with the targets set forth in point 2.

Therefore Fasset’s implementation strategy to carry out their mandate is informed by research,

stakeholder requests and sub committees

In order to carry out is quality assurance mandate further, Fasset uses a particular quality assurance

model that is discussed below.

2.2.3 Quality Assurance Model

Quality assurance of the majority of qualifications in Fasset’s sector is managed by the sector’s

professional bodies. In consultation with the professional bodies, it was decided that Fasset would

adopt a Quality Assurance Partners (QAPs) model for quality assurance in the sector.


To gain accreditation for qualifications that fall within their scope, professional bodies apply, and have

to meet rigorous criteria, in order to perform quality assurance functions on behalf of FassetQA.

QAPs accredit providers and are responsible for some of the ETQA functions (including site visits and

monitoring visits), however Fasset remains responsible for the verification of assessments and

certification of learners.

The following professional bodies act as QAPs:

The South African Institute of Professional Accountants (SAIPA)

Association of Certified Chartered Accountants (ACCA)

Association of Accounting Technicians (AAT)

Chartered Institute of Management Accountants (CIMA)

Institute of Certified Bookkeepers (ICB)

2.2.4 SAICA

The South African Institute of Chartered Accountants (SAICA) is accredited by SAQA as an ETQA and

can perform all the functions of an ETQA as listed in section 2.2.1. SAICA is responsible for the

quality assurance of a number of qualifications e.g. the Chartered Accountant (CA): Auditing.

Only Setas can however register learnerships and can register learners on learnerships, and as a

result SAICA is working in partnership with Fasset in implementing the following Fasset registered

learnerships:

Chartered Accountant: Auditing

Chartered Accountant: Financial Management

Associate General Accountant

Associate Accounting Technician

SAICA reports to Fasset on the status and progress of the learners enrolled on the above

learnerships.

3. Skills Development Act (SDA)

Once the foundations for the education and training system had been laid, the Skills Development Act

was promulgated in 1998.

The purpose of the Act was to:

Develop the skills of the South African workforce,

Increase levels of investment in education and training in the labour market,

To improve the return of investment,

Encourage employers to use the workplace as an active learning environment,

Provide employees with opportunities to acquire new skills.


The following institutions were established by the Act:

The National Skills Authority (NSA),

The National Skills Fund (NSF),

A skills development levy grant scheme (later stipulated in the Skills Development Levies Act

of 1999),

Sector Education & Training Authorities (Setas),

Labour centres,

Skills Development Planning Unit (SDPU).

3.1 Legislation Changes

The Skills Development Amendment Act 20038 was gazetted on 1 December 2008. Although the

amended act remains largely unchanged when compared to the draft Amendment Act gazetted in

February 2008, there are some changes that will affect SDFs. These have been described in the

content above. Detail on the changes may be found on the Fasset website (www.fasset.org.za).

4. The Skills Development Levies Act, 1999

Many leading countries voluntarily spend 5% and more of their payroll on training. The average

expenditure on training in 2000 in South Africa was 1.3% of payroll. (Rainbow SA, 2007) As South

Africans were not voluntarily increasing the money spent on training, the Skills Development Levies

Act (SDLA) of 1999 was implemented.

The principal aim of the SDLA is to finance skills development programmes by way of a compulsory

levy system. Based on the Act, every company that exceeds the threshold set for the annual payroll

(as calculated for Pay as You Earn (PAYE)) has to pay a 1% levy.

Changes were made to the Levy-Grant System in 2005 and based on these changes, every company

with a payroll that exceeds R500 000 now has to pay the 1% levy.

CHANGES TO THE LEVY GRANT SYSTEM

Year Levy based on annual payroll that exceeds: Mandatory Grant Discretionary Grant

1999 – 2005 R250 000 60% 10%

2005 - current R500 000 50% 20%

It would seem that the Act did have an effect as expenditure on training increased. The average

expenditure on training as a percentage of payroll in 2002/03 was 2.1%. Large enterprises spent at

2.8%, which is a much higher proportion than medium and small enterprises. This pattern of higher

levels of spending in large enterprises compares similar to the international experience, where

expenditure on training usually increases with enterprise size (Labour Market Review 2005).


http://www.fasset.org.za/

More information on Levies will be provided in Section 5: Levies and Grants.

The National Skills Development Strategy (NSDS) 2005 - 2010 is intended to implement the SDA.

The NSDS 2005 - 2010 spells out the national priority areas to which the projected R21, 9 billion,

income from the Skills Development Levy (SDL), will be allocated over these five years. Details of this

can be downloaded from the Department of Labour (DoL) website.

4.1 Setas

25 Setas were established in March 2000 in terms of the SDA, to cover all sectors in South Africa,

including government, to serve the training needs of the various industries. There are now 23

registered Setas. The Setas are licensed by the DoL for five year periods and where the DoL have

seen it appropriate to not renew certain Seta licenses, Setas may fall away.

A list of the current Setas can be found on the Department of Labour’s website (www.labour.gov.za).

These include for example:

1. Bank Seta: servicing the banking and microfinance industries

2. Agri Seta: servicing the primary and secondary agriculture sectors

Fasset is the Seta for Finance, Accounting, Management Consulting and other Financial Services.

The members of a Seta include employers, trade unions, professional bodies, government

departments and bargaining councils, where relevant, from each industrial sector.

4.1.1 The Work of Setas

We have mentioned earlier that a Seta acts as a quality assurance body for education and training in

their sector. All Setas will thus have an ETQA department.

Fasset will, specifically, in accordance with the SDA:

Develop a SSP within the framework of the NSDS,

Implement a SSP by:

o Approving and monitoring WSPs,

o Establishing Learnerships,

o Allocating grants to employers, education and training service providers and

employees and

o Monitoring education and training in this sector.

Promote Learnerships by:

o Identifying appropriate workplaces where individuals can gain practical work

experience,

o Improving and supporting learning through the development of learning

methodologies and materials,

o Assisting in the conclusion, registration and monitoring of Learnership agreements.


http://www.labour.gov.za/

Liaise with the NSA as well as other Setas on issues including:

o National skills strategy,

o Skills development policy,

o Its own SSP.

Report to the Director-General of Labour on the implementation of its SSP, its income and

expenditure,

Liaise with the employment services of the DoL and education councils and other regulatory

bodies in terms of education laws of South Africa in order to improve the quality of

information:

o About employment opportunities,

o Between education providers and the labour market.

Facilitate the involvement of the relevant government departments in the activities of Fasset

in order to:

o Address the competency requirements for social delivery,

o Address the learning needs of the most vulnerable segments of the sector,

o Promote training in Small, Medium, Micro Enterprises (SMMEs) to enable them to

qualify for public contracts.

Perform any other duties imposed by the Act or any other function not specifically mentioned,

in order to fulfil the objectives of Fasset (Fasset, 2008).


5. The National Picture

6. Interpreting legislationSince the inception of the concept of “skills development” in South Africa, it has become increasingly

important for SDF’s to be involved not only with policy and legislative implementation, but also to be

involved in the design and development of these policies and pieces of legislation. Varying

interpretations of Acts and regulations by Setas and other governmental and private institutions often

leave SDF’s with conflicting information. This may leads to misrepresentation and confusion.

Communication and compliance are critical skills for an SDF and it is therefore important that you have

some understanding of how legislation is developed and finally gazetted so that you can research and

decide yourself what is considered “legal” and what is not.

Process of development of legislation includes:

1. Green Paper: this is a tentative government report of a proposal without any commitment to action;

the first step in changing the law. Green papers are issued much more frequently than white papers

and are more open ended. They are also known as consultation documents and may merely propose

a strategy to be implemented in the details of other legislation or they may set out proposals on which

the government wishes to obtain public views and opinion. They may result in the production of a

white paper.


Standards advisory panels ETQA’s

Education & Training Quality Assurers

SGB’s Standards Generating

Bodies

SA QualificationsAuthority (SAQA)

Dept of Education

Dept of Labour

National SkillsAuthority (NSA)

10 9 8 7 6 5

432

1

SKILLS DEVELOPMENT STRATEGY

Setas Sectoral Education

& Training Authority

Employers1% Levy

SARS

(GETC) General EducationSCHOOLABET

(FETC) Further

Education

(HETC) Higher

Education

The NQF

Providers

NLRD

Learners

2. White Paper: this is an informal name for a parliamentary paper enunciating government policy.

They are issued by the government and lay out policy, or proposed action, on a topic of current

concern. Although a white paper may on occasion be a consultation as to the details of new

legislation, it does signify a clear intention on the part of a government to pass new law.

3. Bill: This is a proposed new law introduced within a legislature that has not been ratified, adopted,

or received assent. Once a bill has become law, it becomes an act.

4. Legislation: This is a law which has been promulgated (“enacted") by a legislature or other

governing body. The term may refer to a single law, or the collective body of enacted law, while

"statute" is also used to refer to a single law. Legislation can have many purposes: to regulate, to

authorize, to provide (funds), to sanction, to grant, to declare or to restrict. In South Africa, legislation

is in draft until it has been for public comment. Once this process is finalised, the legislation becomes

final and then can only be changed through amendments. (Wikipedia, 2009)

Understanding these processes and the legal jargon associated with written legislation will help equip

all SDF’s to make sound recommendation and interpretations of the legislation and associated

regulations. Setas currently have no mandate to vary from these pieces of legislation and the guiding

regulations. Although interpretations may vary it is important for us to understand and hold Setas and

other government bodies accountable for their implementations of the law.


Section 2: Assessment & the NQF

Unit standards are the foundation of the NQF. (Fasset, 2008)

1. Unit Standards & Qualifications1.1 Defining Unit Standards

Unit standards specify the outcomes that a learner will need to achieve by indicating:

What a learner must be able to do,

How well they must do it and

Within what parameters (scope or context) it must be done.

The SAQA Act, No. 58 of 1995 defines unit standards as “registered statements of desired education

and training outcomes and their associated assessment criteria”.

Unit standards are currently developed by Standards Generating Bodies (SGBs) whose work is

overseen by Standards Advisory Panels who in turn recommend the registration of unit standards to

SAQA. SAQA is responsible for the registration of unit standards on the NQF.

A unit standard is the most basic component against which recognition can be gained on the NQF.

Qualifications may consist of a number of unit standards equaling a total of a minimum of 120 credits.

Credit: Each unit standards has credits assigned to it. Credits refer to the weight assigned to a unit standard – it indicates the time an average learner would take to achieve the unit standard. 1 credit = 10 notional hours of learning.

Notional Hour: A notional hour is the amount of hours an average learner would require to master a unit standard.

1.2 Components of a Unit Standard

Access the unit standard ‘Compile elementary accounting reports’ (ID: 120106) on SAQA’s website and analyse it according to the sections discussed below. Section 1.3 will guide you in finding a unit standard.

A unit standard will always start with a table that will contain the following information:

Component Description

SAQA Logo Used to indicate that the unit standard has been approved by SAQA.

Unit Standard Title The outcome of learning or training.

ID Number Allocated by SAQA, used as a reference number.


http://regqs.saqa.org.za/showUnitStandard.php?id=120106


NQF Level The level at which a unit standard is pitched based on the eight levels of the NQF

Credits Credits refer to the weight assigned to a unit standard, it indicates the time an average learner will take to achieve the unit standard.

SGB Name Name of the SGB involved in compiling the unit standard.

Field & Subfield Indication of where in the 12 fields of learning identified, this unit standard falls.

Registration Start Date Date on which the unit standard is registered by SAQA.

Registration End Date Date on which the unit standard registration expires.

SAQA Decision No. Decision number used by SAQA.

After the table, the following information will appear:


Purpose of the Unit Standard States what a learner will be capable of upon completion of the specific unit standard (should be read in conjunction with the unit standard title). It also provides an indication as to whom the standard is aimed at.

Learning Assumed to be in Place and RPL

Indicates knowledge and skills that is a prerequisite of this unit standard.

Range Statements Defines the context and scope of the unit standard as a whole and / or the specific outcomes and assessment criteria.

Specific Outcomes Indication of what the learner will need to achieve within the context of the job or task the unit standard is written for.

Assessment Criteria Used to assess learners. Provides guidelines on what is expected from a Specific Outcome.

Accreditation and Moderation options

Accreditation: Specifies requirements that the Provider should meet.Assessment: Specifies requirements that the Assessor should meet.Moderation: Specifies moderation requirements.

Essential Embedded Knowledge

Summarises the underlying knowledge learners require to master the unit standard.

Critical Cross-field Outcomes Consist of qualities the NQF identified for development in students, these outcomes apply across all learning fields.

1.2.1 Specific Outcomes

Specific outcomes are statements regarding elements of competence. They indicate what the learner

will need to achieve within the context of the job or task the unit standard is written for.

These outcomes will not only refer to subject content, but will also include actions, roles, knowledge,

understanding, skills, values and attitudes that a learner has to perform to demonstrate competence

(SAQA, 2001).


The criteria provided indicating how these outcomes will be assessed are the assessment criteria for

those outcomes.

1.2.2 Assessment Criteria

Assessment criteria are statements whereby an assessor can judge whether the evidence provided by

a learner is sufficient to demonstrate competent performance for each related outcome.

Learners have access to the assessment criteria and are thus prepared for assessment – they know

what is expected of them to achieve outcomes and competence.

1.2.3 Critical Cross-field Outcomes (CCFOs)

All unit standards contain CCFOs. CCFOs consist of qualities the NQF has identified for development

in students, they are essential life skills and act as the foundation upon which other skills are built.

CCFOs are generic and apply to learners across all fields of learning.

There are eight critical cross-field outcomes:

Identify and solve problems using critical and creative thinking,

Work effectively in a team,

Organise and manage oneself and one’s activities,

Collect, analyse, organise and critically evaluate information,

Communicate effectively using visual, mathematical and / or language skills in oral or written

form,

Use science and technology effectively and critically, showing responsibility towards the

environment and the health of others,

Demonstrate an understanding of the world as a set of related systems by recognising that

problem-solving contexts do not exist in isolation,

Contribute to the full personal development of an individual through awareness of:

o How to learn more effectively,

o How to be a more responsible citizen,

o How to be culturally and aesthetically aware,

o How to explore education and career opportunities,

o How to develop entrepreneurial opportunities.

Most unit standards do not use all 8 critical cross-field outcomes:

Only the CCFOs that relate to the purpose, specific outcomes and Essential Embedded

Knowledge of the unit standard are incorporated in the unit standard,

CCFOs are adapted in each unit standard to relate to that specific unit standard, i.e. learners

are required to produce evidence that they can identify and solve problems in the context of

the unit standard.


Assessors need to ensure that their learners have addressed the CCFOs appropriately at the level of

the unit standard.

1.3 Finding Unit Standards

All unit standards are published on SAQA’s website: www.saqa.org.za. If you would like to find a unit

standard on a specific topic, you can visit this website. You can select the option:

1. Qualifications and Unit Standards,

2. Registered Qualifications and Unit Standards,

3. Search for a Unit Standard.

You can then enter the topic for which you would like to find a unit standard under Unit Standard Title.

If you do a search using a specific word, only unit standards with that word in their title will appear, so

you may have to play around with synonyms or similar concepts.

If you know the NQF level on which the unit standard should be, you can enter the NQF level to limit

your search.

Should you have the Unit Standard ID number, you will be able to find the unit standard by entering

this number under Unit Standard ID.

The SAQA website lists both expired and current unit standards as well as qualifications.

Expired unit standards: A unit standard has a life span of three years. The registration end date indicates when a unit standard has expired. Each unit standard has a transitional period of one year after it has expired where learners can still be enrolled on the unit standard. A teach-out period of two years applies, i.e. learner results need to be submitted within two years of the registration date.

1.4 Qualifications

Both unit standard based qualifications and outcomes based qualifications are registered with SAQA.

1.4.1 Unit Standard Based Qualifications

Access the qualification ‘Further Education and Training Certificate: Bookkeeping’ (ID: 58376) on SAQA’s website and analyse it according to the sections discussed below. Section 1.3 will guide you in finding a qualification.

Qualifications are made up of a number or unit standards equalling a minimum of 120 credits. Each

qualification will however specify the amount of credits required to obtain that specific qualification.


http://www.saqa.org.za/

Qualifications as with unit standards are registered by SAQA on the NQF. SAQA accredits a specific

Seta to act as quality assuror for a qualification.

A qualification will consist of:

Fundamental unit standards,

Core unit standards,

Elective unit standards.

Qualifications are structured in this way to ensure that learners are developed holistically.

Fundamental unit standards: Will include unit standards on communication, numeracy, personal development, life skills

and computer literacy.

These unit standards are compulsory.

Learners can undergo Recognition of Prior Learning (RPL) against these unit standards

based on previous education and training.

Core unit standards: These unit standards are the basis of the qualification, will focus on the subject matter

expertise required.

They are compulsory.

Elective unit standards: These are used to enrich a qualification or specialise in a subject.

A learner can select the elective unit standards they would like to complete.

Expired Qualifications: The normal lifespan of a qualification is three years. The registration end date indicates when this period has expired. After three years a qualification will be reviewed, and pending the outcome of the review process, re-registered, significantly changed, or replaced by a newly developed qualification. Each qualification has a transitional period of one year after it has expired where learners can still be enrolled on the unit standard. A teach out period of n + two years applies. (n refers to the normal duration of the qualification).

Expired Unit Standards within Qualifications: Each unit standard takes on the life span of the qualification it is incorporated into for the purpose of the qualification. An expired unit standard will take on the life span and phase out period of the qualification it is part of. However, should the same unit standard be used as a stand alone component, this rule will not apply.

1.4.2 Outcomes-based Qualifications

An outcomes based qualification does not consist of unit standards. Such qualifications list exit level

outcomes that a learner has to achieve together with associated assessment criteria. These are

sometimes registered on the NQF as a way of “bridging” qualifications from this format to unit standard

based qualifications. It is foreseen however that some professional qualifications will remain purely

outcomes based.


1.5 Skills Programmes

A Skills Programme is:

An occupationally-directed programme comprising an agreed cluster of related unit standards

equaling less than 120 credits and will have practical (work-place) experience,

Constructed to constitute credits towards NQF registered qualifications,

Delivered by an accredited Provider.

A skills programme can be considered a mini-qualification in that it comprises a number of unit

standards from the same qualification, providing learners with the opportunity to work towards a

qualification. It goes further than a qualification in that the design of the programme may specify the

sequence in which the unit standards must be achieved and the practical (workplace) experience that

forms part of the programme. A Seta registers a skills programme. These types of learning

programmes will be recognised under the new broad definition of “learnerships” as legislated in the

new Skills Development Act.

2. What is Assessment?Assessment can be described as the marking or evaluation of evidence presented by a learner to

make a judgement on their competency against set outcomes and assessment criteria as outlined in a

unit standard or qualification.

2.1 What is Competence?

The achievement or non-achievement of outcomes is referred to as competent or not-yet-competent.

SAQA refers to competence as “applied competence”. Applied competence is demonstrated through

a learner’s ability to integrate concepts, ideas and actions in authentic, real-life contexts. It can be

expressed as a combination of practical competence, foundational competence and reflexive

competence.

Figure 2.3: Applied Competence (SAQA, 2001)

Figure 2.1: Applied Competence


Applied Competence

Practical Competence Foundational Competence Reflexive Competence

Learner demonstrates his/her ability to perform a set of tasks in an authentic context.A range of actions or possibilities is considered and decisions are made about which actions to follow.

Learner demonstrates an understanding of what he/she or others are doing and why. This underpins the practical competence and therefore the actions taken.

Demonstration of the learner’s ability to integrate performance with understanding, so as to show that the learner is able to adapt to changed circumstances appropriately and responsibly, and to explain the reason behind an action.

Knowledge, skills and values are the foundation of applied competence.

Hands(Skills / practical side)

Head(Knowledge)

Heart(Attitude or Values of the learner)

Figure 2.2: Competence

2.2 Forms of Assessment

Learners have to be informed if they are undergoing diagnostic, formative or summative assessment.

2.2.1 Diagnostic Assessment

Diagnostic Assessment serves as a tool to assess the strengths and weaknesses of learners in order

to inform instructional decisions. This is often used before a learner is enrolled on a learnership or

qualification to ensure that the learner has the aptitude and underlying knowledge and skills to cope

with the learning.

2.2.2 Formative Assessment

Formative assessment is conducted during the training process. Characteristics of Formative

Assessment:

Used to support the learning process – learners can share own experiences and knowledge,

Determine the learners strengths and weaknesses,

Base future learning on strengths and weaknesses,

Learner is provided with feedback on own progress,

Used to determine learner’s readiness to undergo summative assessment,

Credits are not awarded based on formative assessment.

Evidence collected during formative assessment can be used for summative assessment. This is

done to avoid overburdening the learner during summative assessment. It is however important that

the learner gives their permission to use the evidence during summative assessment.

2.2.3 Summative Assessment


COMPETENCE

Summative assessment is conducted once the training process has been completed and a judgment

can be made about the learner’s competence at the end of learning.

Characteristics of Summative Assessment:

Conducted at the end of a learnership (based on one or more unit standards),

Learner’s readiness needs to be confirmed before assessment can take place,

Evaluates applied competence,

On declaration of competence, NQF credits are given, recorded and reported.

3. What is Recognition of Prior Learning (RPL)?Many learners are in possession of skills and knowledge they have no formal certificate for. These

skills and knowledge have been gained through practical work experience. Recognition of Prior

Learning (RPL) is the recognition of this learning and the awarding of NQF unit standards, skills

programmes or qualifications as a result. (Rainbow SA, 2007)

An employee can for example for a number of years have conducted duties relating to bookkeeping

without any formal qualifications. This employee can now achieve the Further Education and Training

Certificate in Bookkeeping through RPL without undergoing training that will duplicate what he/she

already knows. The employee can contact an RPL centre to be assessed against the whole

qualification or ask to be assessed against the individual unit standards the learner believes he/she is

competent against.


Section 3: Developing the Strategic Role of the SDF

1. Skills Development Facilitator

A Skills Development Facilitator (SDF) is responsible for the planning, implementation and reporting of

training in an organisation, with Seta related duties.

1.1 Appointment of an SDF

In larger organisations, a currently employed training or Human Resources (HR) manager may be

appointed as an internal SDF. In smaller organisations there is often no dedicated training or HR

professional fulfilling this role and so a manager or company owner will take it on. The role can also

be outsourced to a professional external SDF. (Rainbow SA, 2007)

1.2 Function of an SDF

The functions of an SDF are to:

Assist the employer and employees to develop a Workplace Skills Plan (WSP) which

complies with the requirements of the Seta,

Submit the WSP to the relevant Seta,

Advise the employer on the implementation of the WSP,

Assist the employer to draft an Annual Training Report (ATR) on the implementation of the

WSP,

Advise the employer on the quality assurance requirements set by the Seta,

Act as a contact person between the employer and the Seta,

Serve as a resource with regard to all aspects of skills development,

Communicate SETA initiatives, grants and benefits to the employer,

Communicate with branch offices, and all employees in the main office and branch offices,

concerning events and grants being offered at the Seta.

The employer must provide the SDF with the resources, facilities and training necessary to perform

the functions set out.

An SDF is a:

Facilitator: To facilitate the development of an employer’s skills development strategy.

Expert: To serve as an expert resource for accrediting the employer as a training provider

and for the implementation of appropriate learnerships and skills programmes.

Administrator: To complete and submit the workplace skills plan and annual training report.


Advisor: To advise the employers and employees on the NSDS (National Skills Development

Strategy) and on the implementation of its workplace skills plans.

Education and needs evaluator: To assess the skills development needs of the organisation.

Mediator: To serve as a contact person between the employer and the relevant Seta.

1.3 SDF Unit Standards

The South African Board of Personnel Practitioners (SABPP) and the ETDP Seta are the accredited

ETQAs for seven SDF unit standards. There is currently no full qualification for SDF’s although this

has been in the pipeline for some time. These unit standards fall under a number of qualifications,

including:

National Certificate: Occupationally Directed Education, Training and Development

Practices (50331)

National Diploma: Human Resources Management and Practices (61592)

The seven SDF unit standards are:

Develop an organisational training and development plan. (15217)

Conduct an analysis to determine outcomes of learning for skills development and other

purposes. (15218)

Provide information and advice regarding skills development and related issues.( 15221)

Promote a learning culture in the organisation. (15222)

Conduct skills development administration in an organisation. (15227)

Advise on the establishment and implementation of a quality management system for skills

development practices in an organisation. (15228)

Coordinate planned skills development interventions in an organisation. (15232)

It is not a requirement that a SDF has to have any formal training to practice as an SDF. Some Setas

however have started to enforce that SDF’s should have some training and show competence against

these unit standards, otherwise they retain the right to reject their mandatory grant submissions. This

has caused some controversy and confusion – to date you do not have to be a qualified SDF in order

to submit grant applications to Fasset. It is however advisable to gain the requisite understanding and

skills in order to ensure the quality of your submissions.

1.4 The Association of Skills Development Facilitators of South Africa (ASDFSA)

The ASDFSA is an independent association representing SDFs and their professional development,

across sectors and Setas. The ASDFSA views skills development facilitation as a strategic business

function and SDFs as professionals and aim to support these individuals. .


Further information about this association and to register with them is available at www.asdfsa.co.za or

by contacting:

Gill Connellan

Cell: 082 853 3778

E-mail: [email protected] or [email protected]

1.5 South African Board of Personnel Practitioners (SABPP)

The SABPP Professional is the registering body for HR as well as the ETQA for Human Resource

qualifications. They endeavor to raise the standards and stature of human resources in South Africa

through evaluation and registration

a continued professional development standard

a code of conduct and disciplinary procedures

obtaining personal commitments to professionalism and ethics

accrediting HR providers

registering HR Assessors and Moderators

Practicing SDFs are welcome to register as HR practitioners with them.

1.6 American Society for Training and Development (ASTD)

The South African chapter of the ASTD aims to: “assist organisations to achieve a competitive

advantage in a global economy by providing members with professional advice, benchmarking

opportunities, process facilitation, workshops, local and international conferences, network forums and

annual research in the field of Training and Human Resource Development.”

For further information please see their website www.astd.co.za or contact:

Robin Probart

082 894 6932

2. The Training Committee

It is strongly recommended that for organisations with more than 50 employees, a Skills Development

Committee is established for the purposes of consultation on training matters. This committee, as a

whole, should reflect the interests of employees from all occupational categories in the organisation's

workforce.

A consultative forum should be established or an existing forum used if this is appropriate, for

example, an existing diversity committee, affirmative action or employment equity forum.

All stakeholders should be included in this forum, e.g.:


http://www.astd.co.za/

mailto:[email protected]

http://www.asdfsa.co.za/

representative trade unions

employee representatives from designated groups, non-designated groups, all occupational

categories and levels, and senior management, including the managers assigned with

responsibility.

This forum should engage in proper consultation. Proper consultation includes:

the opportunity to meet and report back to employees and management,

reasonable opportunity for employee representatives to meet with the employer,

the request, receipt and consideration of relevant information,

adequate time being allowed for each of the above steps.

Ongoing interaction with and accessibility to senior management with regard to workplace skills issues

is critical to the success of this process.

The frequency of consultative forum meetings will vary from employer to employer depending on size,

sophistication, existing levels of diversity, and what has already been accomplished in the workplace

with regard to skills development. Meetings should, however, take place regularly and employers

should allow time off for these meetings.

2.1 Role of the Training Committee

The role of a Training Committee is to:

Authorise and sign off the mandatory grant application

Drive & direct the skills development process,

Ensure that representative consultation takes place regarding up-skilling of employees,

Ensure that the SDF is leading the way with the SD process,

Support the SDF in the efforts of “spreading the word” regarding training and up-skilling,

Figure 2.1: Role of the Training Committee


Training Committee

Monitoring;Budget (cost centers, people,comply to plan)WSP/ EE plan

Communication;Road shows/ newslettersObtain buy-in and commitmentPromote conceptLiaise with others

Skills Audit and DevelopmentPlans;Job profilesSWOT skills analysisPeople assessment/ career

pathwaysEvaluation

TC mandate;establish milestonescapacity buildingvision, mission, scopejob profiles for committee (role of individual vs role of group) and responsibilities time to invest

Compliance with legislation;SDFWSPImplementationTimeframesReportingInternational

Assessment System;AssessorsRPLQuality Assurance SystemsLearnershipsHead office policies and

procedures

Other;Re-introduce cultural diversity

trainingSGB involvementImplementation strategySupport EE plan

2.2 Constitution of the Training Committee

A Training Committee must have a constitution in place with the given mandate and should be

performance driven to ensure commitment.

The committee should, aside from its legal obligations in terms of the Employment Equity and Skills

Development Acts, be committed to:

Improving the quality of life of all workers, their prospects of work and mobility,

Improving productivity in the workplace and the competitiveness of the company,

Increasing the levels of investment in education and training and improving the return on that

investment.

A Training Committee should represent the interests of all sectors of its workforce and should consult

on the implementation and monitoring of its employment equity and skills development plans in terms

of the relevant Acts and the Company’s requirements.

2.3 Scope of a Committee

The scope of the committee comprises the activities in the company, as these have been decided in

consultation with staff, as identified and described in the Employment Equity, Skills Development Act

and the Skills Development Levies Act and any regulations, codes of good practice, directives and

administrative guidelines published in terms of these Acts.

The committee is responsible for making recommendations to the Board of Directors of the

organisation. The Training Committee is not responsible for the implementation of its

recommendations.

The Training Committee may not be utilised as a forum in which to raise grievances and or demands

not related to its scope and objectives.

2.4 Objectives

The first objective of the committee is to promote the objectives of the Skills Development Act within

the company by:

Promoting skills development, by assisting and advising on the development of competency

levels of employees so that individual and team performance can be improved, and the

objectives of the Employment Equity plan realised,

Proposing actions to continuously enhance the skills level of employees so that technology,

process and structural changes can be effectively implemented,

Developing a workplace skills plan,


Monitoring and reporting on the progress made in implementing the workplace skills plan,

Facilitating employee mobility through outcomes based education and training,

Assisting employees in utilising the opportunity to use workplace skills development as a

mechanism to achieve nationally recognised unit standards and qualifications,

Enhancing the company’s quality of education and training,

Addressing the company’s past discrimination and imbalances,

Contributing to the personal development of learners,

Optimising the levy rebates from the Seta.

The second objective of the committee is to promote the objectives of the Employment Equity Act

within the company by:

Conducting analyses of its employment policies, practices, procedures and the working

environment, in order to identify employment barriers which adversely affect people from

designated groups,

Developing of an employment equity plan which will achieve reasonable progress towards

employment equity in the company's workforce,

Giving input into the preparation and compilation of the reports required to be submitted to

the Director-General of the Department of Labour,

Assisting with the internal procedures to resolve any dispute about the interpretation or

implementation of the employment equity plan.

Section 4: Developing and Implementing a WSP

1. Understanding the Development of a Skills Plan


A skills plan outlines the planned training and education interventions of an organisation. It is best

practice for every organisation regardless of its size to determine the skills gaps within their

organisation and decide how they will address these gaps through training.

Setas base the payments of Mandatory Grants on the submission of a Mandatory Grant Application

which contains a WSP (Workplace Skills Plan), as well as an ATR (Annual Training Report). A skills

plan should be well researched and reflect the training needs of the company before being

documented in the WSP (Workplace Skills Plan).

1.1 Benefits of Planning

By compiling a training plan, an SDF has the opportunity to get the input from various role players

within the company to ensure that the plan focuses on the needs that exist within the company. It is

important to work with management to ensure:

buy in and co-operation from management as well as

resource allocation.

To achieve the full benefit of training, training has to be based on needs identified within the company.

Only then can it contribute to:

Upgrading of skills,

Enabling change and transformation,

Assisting the organisation to achieve and maintain a competitive edge,

Instilling a culture of lifelong learning.

By documenting the training that they have planned companies can measure the implementation of

the plan to ensure that the development of employees – whose skills are a company’s most important

commodity - does not get sidetracked.

1.2 Planning Process

It is important to understand all the influences or ‘issues’ that should be taken into consideration when

starting the planning process.

The SDF should consider the following issues when developing a skills plan:

National & Sectoral issues ▪ Identify key skills shortages within company and assess relative importance of identified shortages in the sector.

Organisational issues ▪ Examine company-wide goals and problems to determine where training is needed by means of a formal skills audit.

▪ Examine: Vision & mission, business strategy & objectives, productivity, succession, career planning and transformation (Employment Equity (EE) & Black Economic Empowerment (BEE)).


▪ Feed skills gap information into the SSP by means of the WSP.

Task related issues ▪ Examine tasks performed and competencies required to determine what employees must do to perform successfully.

▪ Feed skills gap information into the WSP by means of the department / section plan.

Individual issues ▪ Examine competencies, current performance and career development needs to determine who needs training.

▪ Feed skills gap information into the WSP by means of the personal development plans and department / section plan.

(Botha, Kiley & Truman, 2007)

1.2.1 Conducting Skills Audits

In order to conduct a Skills Audit, also referred to as a Skills Needs Analysis, a competency profile can

be developed for each job within a company. The competency profile will list the knowledge, skills,

values and other behaviours employees require to be successful in their jobs.

Conducting a skills needs analysis involves using the list of competencies of a given job, and

comparing these to the list of competencies of the employee filling that particular position. Any

variances should be recorded and noted as the skills gaps (if there is a shortfall in the competencies of

the staff member).

The analysis of these variances in competency levels gives rise to a list of possible training

interventions for possible training beneficiaries. This will be the input for the WSP. The skills needs

analysis can result in lengthy lists of skills gaps in the company. The most required skills and training

needs should be prioritised. The remaining needs should be recorded and can be addressed during

the next WSP period.

There are various methods of conducting Skills Needs Analyses: from empirical methods to the

informal processes similar to the above-mentioned method. The SDF should research different

methods to suit the company they represent’s needs and budget.

1.2.2 Scarce & Critical Skills

The Department of Labour has mandated the Setas in recent years to gather data on Scarce and

Critical Skills. The information gathered is used to publish the National Scarce Skills List for South

Africa – this can be found on the DoL’s website www.labour.gov.za. In this document the Ministry of

Labour gives a comprehensive account of the skills that are needed for economic growth and

development. This list reflects the skills that are most needed in our country and on which we need to

focus efforts on acquiring and developing. The Department of Home Affairs uses this list to develop

the current Work Permit Quota List that they publish annually.


It was adopted by the Accelerated Shared Growth in South Africa's Joint Initiative on Priority Skills

Acquisition as the “AsgiSA Master Skills list” and can be used extensively through schools and training

institutions for career guidance.

Scarce SkillsScarce Skills refer to an absolute or relative demand: current or in future, for skilled, qualified and

experienced people to fill particular roles/professions, occupations or specialisations in the labour

market. Scarce skills are usually measured in terms of occupation or qualification. Both ‘occupation’

and ‘qualification’ have the merit of being relatively straightforward to measure and readily understood.

(Department of Labour, 2007)

The Department of Labour has also included a differentiation between absolute and relative scarcity of

skills in the definition:

Absolute scarcity refers to suitably skilled people who are not available in the labour market.

Specific contexts in which absolute scarcities may arise include:

o A new or emerging occupation, i.e. there are few, if any, people in the country with the

requisite skills.

o Firms, sectors and even the national economy are unable to implement planned

growth strategies because productivity, service delivery and quality problems are

directly attributable to a lack of skilled people.

o Replacement demand would reflect an absolute scarcity where there are no people

enrolled or engaged in the process of acquiring skills that need to be replaced (DoL,

2006c).

Relative scarcity refers, for example, the context where suitably skilled people are in fact

available in the labour market but they do not exhibit other employment criteria, for example:

o High-level work experience , for example project management of large construction

sites such as dams or power plants.

o Geographical location , for example, people are unwilling to work outside of urban

areas.

o Equity considerations , for example, there are few if any candidates with the requisite

skills from specific groups available to meet the skills requirements of firms and

enterprises (DoL, 2006c). (Department of Labour, 2007)

Look at this example. Companies, who experience a shortage of bookkeepers in their local economy

due to e.g. the migration of students to Cape Town from rural areas, are experiencing a relative

scarcity. Companies all over the country are however finding it difficult to find Chartered Accountants

(CAs). This reflects an absolute scarcity (Fasset, 2008).


Critical SkillsCritical skills refer to particular capabilities needed within an occupation for example, general

management skills, communication and customer handling skills, team-work skills, communication,

and technology skills (Department of Labour, 2007).

Existing CAs in rural areas could have a knowledge gap in the area of, for example GAAP, as a result

of GAAP trainers not providing training in rural areas. Such a skill is important to the functioning of a

CA and is therefore referred to as a skills gap (Fasset, 2008).

2. Completing and Submitting the Documentation

It is a requirement for all Skills Development Levy (SDL) paying companies to complete a WSP

together with an ATR and submit to their Seta to claim the Mandatory Grant. The WSP/ATR has to be

submitted by the 30th of June. This is irrespective of the Seta which the employer pays their SDL to.

The deadline is published in regulations to the Skills Development Act.

You can visit the website www.fasset.org.za to download the Mandatory Grant Application form and

guidelines.

The submission of an ATR/WSP is also one of the pre-requisites of claiming the BEE Scorecard points

for the Skills Development element.

2.1 Reporting on Training Implemented

The ATR section requires companies to report on the training that has taken place. In order to simplify

this reporting process an SDF should keep records of all skills development interventions that took

place during the course of the year, recording the topic and the employees who benefited.

Reporting takes place for the period 1 April to 31 March. If the submission will take place on 30 June

2009, the training reported on will be for the period 1 April 2008 to 31 March 2009.

Both the ATR and WSP will require the following information:

The number of employees that were / will be trained in the organisation by job category and

race,

The interventions trained on / planned, including the number of employees to attend these

interventions.



2.2 Workplace Skills Plan - Reporting on Planned Training

The WSP should reflect the training that is planned for the period 1 April to 31 March. If the

submission will take place on 30 June 2009, the skills plan will be for the period 1 April 2009 to 31

March 2010.

2.3 Important Notes

These notes relate to all Setas – not just Fasset.

It is a requirement of the WSP that it be created in consultation with the training committee

and signed off by the committee if the organisation has more than 50 employees, this

consultation increases the buy-in the organisation is likely to receive from its employees who

will be on the receiving end of its WSP,

Write the plan in the format required by the guidelines provided,

Submit the ATR/WSP by 30 June. You can submit online – original signatures to be dropped

off at Fasset,

Keep a copy of your WSP for reference and to measure implementation.

The only instance when requests for extensions will be considered is in cases of force majeur

(e.g. flood or earthquake).

The penalty for submitting Mandatory Grant Applications late is losing the grant in full. The

only exception to this is where a Mandatory Grant Application is submitted within six months

of registration in the case of an employer who has registered for the first time in terms of

section 5(1) of the Skills Development Levies (SDL) Act.

Should your organisation fluctuate between being below the threshold (i.e. with annual payroll

less than R500 000) and going above the threshold, it would be wise to submit your

mandatory grant claim anyway – even if you are technically exempt from SDL at the time of

submission. This is because you will miss out on your grant that year should you go over the

limit later on the year. If you do go over the limit later on in the year the Seta will not approve

your grant application as it will be considered as late.

2.4 OFO Codes & Occupational Categories

2.4.1 OFO Codes

The OFO is a skill-based coded classification system, which encompasses all occupations in the

South African context. The classification of occupations is based on a combination of skill level and

skill specialisation which makes it easy to locate a specific occupation within the framework.

It is important to note that a ‘job’ and ‘occupation’ are not the same. The following definitions are

applied in the OFO:


a) “Job” is seen as a set of roles and tasks designed to be performed by one individual for an

employer (including self-employment) in return for payment or profit.

b) “Occupation” is seen as a set of jobs or specialisations whose main tasks are characterised by such

a high degree of similarity that they can be grouped together for the purposes of the classification.

The occupations identified in the OFO therefore represent a category that could encompass a number

of jobs or specialisations, e.g. the occupation “General Accountant” would also cover the

specialisations “Financial Analyst” and “Insolvency Practitioner”.

Identified occupations are classified according to two main criteria: skill level and skill specialisation,

where skill is used in the context of competency rather than a description of tasks or functions.

The skill level of an occupation is related to competent performance of tasks associated with an

occupation. Skill level is an attribute of an occupation, not of individuals in the labour force and can

operationally be measured by:

the level or amount of formal education and/or training;

the amount of previous experience in a related occupation; and

the amount of on-the job training usually required to perform the set of tasks required for that

occupation competently.

It is therefore possible to make a comparison between the skill level of an occupation and the normally

required educational level on the National Qualifications Framework as well as entry, intermediate and

advanced levels referred to in the National Skills Development Strategy (NSDS).

This comparison is illustrated in Figure 1 below.

The skill specialisation of an occupation is a function of the field of knowledge required, tools and

equipment used, materials worked on, and goods or services provided in relation to the tasks

performed.

Based on skill level and skill specialisation, occupations are divided into Major (one digit), Sub-Major

(two digits), Minor (three digits), and Unit (four digits) groupings.

Occupations (five digits) are subdivisions of the unit groups and can further be broken down into

specialisations or jobs which are however not specified in the OFO itself.

Occupational descriptors are currently being developed and will provide a description of the

associated tasks for every occupational grouping (up to the fifth digit level). An example of what this

could look like is in Table 1 below.


Table 1: Example of the OFO ‘Drill-down’

MAJOR GROUP 2: PROFESSIONALS

PROFESSIONALS perform analytical, conceptual and creative tasks through the application of

theoretical knowledge and experience in the fields of the arts, media, business, design, engineering,

physical and life sciences, transport, education, health, information and communication technology,

the law, social science and social welfare.

Tasks Communicating ideas through language, printed and electronic media, and artistic media

including the visual and performing arts

Analysing, planning, developing and implementing programs and solutions to resolve business

and economic problems

Providing services in financial accounting, human resource development, publicity and

marketing, and the efficient operation of organisations

Flying aircraft, and controlling and directing the operation of ships, boats and marine

equipment

Conducting and analysing research to extend the body of knowledge in the field of the

sciences and developing techniques to apply this knowledge

Designing products, physical structures and engineering systems

Researching and developing curricula, and teaching students in a range of educational

settings

Designing, implementing, testing and maintaining technologies and services that enable

information to be accessed, stored, manipulated, processed, and disseminated

Identifying and treating, and advising on, health, social, and personal issues

Advising clients on legal matters

SUB-MAJOR GROUP 22: BUSINESS, HUMAN RESOURCE, MARKETING AND COMMUNICATION MANAGEMENT PROFESSIONALS

BUSINESS, HUMAN RESOURCE, MARKETING AND COMMUNICATION MANAGEMENT

PROFESSIONALS perform analytical, conceptual and practical tasks to provide services in financial

accounting and transaction matters, human resource development, public relations and marketing,

and conduct studies of the economy, organisational structures, methods and systems.

Tasks Collecting, analysing and interpreting information on the financial viability, cost structures and

trading effectiveness of organisations

Conducting audits, preparing financial statements and controlling treasury systems for

organisations

Developing and reviewing financial plans and strategies, executing orders and negotiating the

purchase and sale of commodities


Developing, implementing and evaluating staff recruitment, training and development

programs

Researching, developing and implementing marketing and public relations campaigns

Studying and developing methods and policies to improve and promote government and

business operations and effectiveness

Developing and managing record and archival systems for retention and destruction of legal,

administrative, evidential, historical and other records

MINOR GROUP 321: ACCOUNTANTS, AUDITORS AND COMPANY SECRETARIES

ACCOUNTANTS, AUDITORS AND COMPANY SECRETARIES plan and provide accounting,

financial auditing and treasury valuation services and systems to individuals and organisations, and

plan and review legislative compliance activities.

Tasks Collecting, analysing and interpreting information on the financial status, cost structures and


Devising, re-organising and establishing budgetary cost control and other accounting systems

such as computer-based systems

Conducting audits and investigations and preparing financial statements and reports for

management, shareholders, statutory and other bodies

Controlling treasury and treasury systems and establishing and reviewing risk management

objectives and treasury policies

Arranging and giving notice of meetings of directors and stakeholders

Advising organisations governing boards on matters concerning compliance with stock

exchange listing rules, relevant legislation and corporation practice

UNIT GROUP 2212: AUDITORS, COMPANY SECRETARIES AND CORPORATE TREASURERS

AUDITORS, COMPANY SECRETARIES AND CORPORATE TREASURERS conduct audits of

accounting systems, procedures and financial statements, manage corporate funding and financial

risk, and administer and review corporate compliance activities.

Tasks Include: Arranging, giving notice of and attending meetings of directors and shareholders

Advising organisations governing boards on matters concerning compliance with stock exchange

listing rules, relevant legislation and corporation practice

Supervising organisations share capital by preparing documents and share issues, and handling

share transfers

Controlling treasury and treasury systems and establishing and reviewing risk management

objectives and treasury policies

Identifying, managing and reporting on financial risks


Assisting with equity management, debt management, securities and taxation planning issues

Collecting, analysing and interpreting information on the financial standing, cost structures and


Devising, re-organising and establishing budgetary cost control and other accounting systems

such as computer-based systems

Conducting audits and investigations and preparing financial statements and reports for

management, shareholders, and governing and statutory bodies

Evaluating the cost effectiveness and risks of operational processes, activities, policies and

systems

Reporting to management on the existence and effectiveness of the system of internal controls

Establishing audit objectives, designs and implementing audit methodologies, processes and audit

report criteria

Occupation: 221201 Company Secretary (skills level 5)

Occupation: 221204 Internal auditor

(skills level 5)

Description Description

Plans, administers and reviews corporate

compliance activities and effective practice

concerning company board meetings and

shareholdings, ensuring all business matters and

transactions are managed and implemented as

directed by the board. May report to the Chief

Financial Officer.

Examines, verifies, evaluates and reports on

financial, operational and managerial

processes, systems and outcomes to ensure

financial and operational integrity and

compliance, and assists in business process

reviews, risk assessments, developing

deliverables and reporting progress against

outcomes.

Within the current OFO there are 8 Major Groups, 43 Submajor Groups, 108 Minor Groups, 408 Unit

Groups and 1171 Occupations.

The structure of the OFO is illustrated in Figure 2. Figure 1 provides an estimated comparison of the

skill level of the Major Groups in relation to the NQF levels as well as entry, intermediate and

advanced level skills. It must be noted that the NQF levels especially are a rough estimation and could

vary as they are an indication of qualification level and not necessarily the skill level associated with

competent performance.


OFONQFNSDS

1

2

3

4

5

1. MANAGERS

Major Occupational Groups in OFO

1

8

7

2

3

4

5

6

ADVANCED

INTERMED

ENTRY

6. SALES WORKERS

3. TECHNICIANS AND TRADES

WORKERS

7. MACHINERY OPERATORS

AND DRIVERS

8. LABOURERS

AND ELEMEN-

TARY WORKERS

4. COMMUNITY

AND PERSONAL

SERVICE WORKERS

5. CLERICAL AND ADMINI-

STRATIVE WORKERS

2. PROFESSIONALS

Figure 1: Comparison between skill levels covered by Major Groups in OFO and NQF and NSDS

levels

Go to www.nopf.co.za for the latest framework for occupations as compiled by the Department of

Labour (DoL).

2.4.2 Occupational CategoriesThere have been changes in a number of occupational groups to be reported on in the Mandatory

Grant, due on 30 June 2009. The Annual Training Report (ATR) in respect of the period 2008/2009

still requires firms to report against nine major occupational groups, however the Workplace Skills Plan

(WSP) portion for 2009/2010 financial year requires reporting against eight occupational groups.

For the 2008/2009 financial year, trainee accounting and auditing clerks fall into the Technicians and

Associated Professionals category. From the 2009/2010 financial year Fasset will be classifying

employees according to eight occupational categories, as opposed to nine categories. Trainee

accounting and auditing clerks now fall into the Professionals category and no longer fall into the

Technicians and Associated Professionals category. Refer to the guidelines at end of the application which contain examples of where certain job titles fit into the new occupational groups.


http://www.nopf.co.za/

Section 5: Levies, Grants and Fasset-funded Interventions

1. When will you pay the levy?

The Skills Development Levies Act prescribes the payment of a Skills Development Levy. According

to the Act, every employer in South Africa who is registered with the South African Revenue Service

(SARS) for Pay-As-You-Earn (PAYE) is liable to register for the compulsory Skills Development Levy

(SDL). The contribution is 1% of total payroll (as calculated for PAYE), including staff who fall below

the PAYE threshold, but excluding learners on registered Learnership agreements, provided the

employer’s total annual payroll amount exceeds R500,000 (Fasset, 2008).

2. Employers qualifying to pay SDL2.1 Am I paying my Skills Development Levy?

Employers can check whether they are registered for the SDL by contacting their local SARS branch

and providing their PAYE number.

Qualifying employers not yet registered for the SDL (but eligible) must submit a completed SDL 201

form (available from SARS) and start remitting monthly levies to SARS (Fasset, 2008).

2.2 To which Seta should I pay my SDL?

You are required to complete an SDL 201 form to register for SDL. When completing this form, first

time registrants for the SDL are required to stipulate the Seta thy wish to belong to.

The law stipulates that employers must register with the Seta whose scope includes the main business

activity of the registrant. The scope of each Seta includes a specific set of Standard Industrial

Classification (SIC) codes, which describe specific business activities. A list of all SIC codes for each

of the 27 Setas can be found at www.fasset.org.za. This list can be used to select the SIC code

describing the relevant business activity that falls under the relevant Seta.

Should a company be registered with the incorrect Seta, an Inter-Seta Change Form (IST01) can be

completed and submitted to Fasset who will facilitate the move either to or out of Fasset.

Once Fasset receives this form, they will request permission to move the company from the Seta the

company is currently registered with, or notify the Seta to which the company would like to move.

Fasset will send this form and the permission obtained, to the DoL, who will then request this change

from SARS. SARS, in turn, changes the Seta to which the company’s levies are being paid. Once the



new Seta receives the funds, the company is registered and up-to-date with the new Seta and can

then start applying for and receiving grant payments (Fasset, 2008).

2.3 Where does your money go?

Of the SDL paid over to SARS, 20% of the amount is transferred by the DoL to the National Skills

Fund (NSF). This funding is used to fund large scale development projects that will address national

skills needs such as training those who are unemployed, the youth, people living in rural communities

and people with disabilities. Fasset is not guaranteed funding via the NSF, but does endeavour to,

and has successfully received funding to train learners who are ultimately intended to enter the Fasset

sector. Therefore, although employers are not able to claim back 20% in this levy amount, they will

ultimately see the benefit of the 20% in the increased supply of skilled labour into the Fasset sector.

The Seta receives the remaining 80% of the levy paid over by the employer. 10% of this levy may be

retained by the Seta to fund its administration expenses, and the employer may claim back from

Fasset up to 70% of the remaining funding via a mandatory (50%) and strategic grant (20%) structure.


20% transferred to the National Skills Fund

Skills Development Levy paid to SARS

80% transferred to Fasset

70% paid out asGrants

10% used for SETA Administration Expenses

50% Mandatory Grant

20% Strategic Cash Grant

Unclaimed Grants / Discretionary Pool(Decided by Fasset Management Board)Lifelong LearnershipDevelopment ProjectsLearnership Cash Grant

What happens to the 1% levy paid?

3. Employers exempt from paying the SDL

Employers who are exempt from paying the SDL and who fall within the Fasset sector can register

with Fasset as a non levy paying (NLP) member in order to qualify to participate in specific Fasset

benefits. Exempt employers do no qualify for grants linked to the reimbursement of the SDL (i.e. the

Mandatory Grant and the Strategic Cash Grant) but do qualify to participate in other Seta benefits

such as the Learnership Cash Grant and the lifelong learnership. Should a company anticipate

exceeding the R500 000 annual payroll threshold during the course of the year, then a normal

mandatory grant claim form should be completed instead of an NLP registration form – in order to

ensure eligibility not only for these benefits but for the mandatory grant as well.

NLP companies can register with Fasset using the NLP Registration Form, which is available on the

Fasset website. This is an annual renewal and his form should be completed and submitted annually

by the 30th of June each year. Should the renewal not be received stakeholder companies are not

entitled to the benefits described above.

Different Setas will have differing approaches with regard to the provision of benefits to employers who

are exempt from paying the SDL. The Fasset Management Board decides on an annual basis on the

benefits that will be made available to non levy paying employers. (Fasset, 2008)

4. Claiming Grants4.1 Mandatory Cash Grant

Regulations to the Skills Development Act (SDA) indicate that an organisation may claim back a

Mandatory Grant of 50% of the SDL by submitting a Mandatory Grant Application – combined

Workplace Skills Plan (WSP) and Annual Training Report (ATR) – application to Seta. The purpose of

the Mandatory Grant Application is to ensure that firms are implementing training, i.e. planning their

training for the year ahead and reflecting on the training that was conducted in the previous period.

The WSP portion of the Mandatory Grant contains the training plan of the firm for the current financial

year. The ATR portion of the application reports on training for the preceding financial year. The Seta

financial year extends from 1 April to 31 March.

Actual training costs are not reimbursed via this grant, rather 50% of the SDL is refunded. This grant

application is due by 30 June of every financial year, and the Seta may not typically issue an extension

for the late submission of this grant. The only instances where the Seta may consider grant

extensions are in cases of lateness due to force majeur and / or where the firm is a new entity in terms

of registration for the SDL and has submitted the grant application within six months of registering as a

levy paying entity.


4.2 Strategic Cash Grant

Specific areas are determined to be of strategic importance to Fasset’s sector and the Strategic Cash

Grant is allocated to initiatives that cover these strategic areas. These criteria change from one year to

another, depending on the priorities of the sector at that time.

Fasset offers employers a Strategic Cash Grant (SCG) of a maximum of 20% of the SDL where the

employer has trained in strategic areas and can describe the expenses incurred in the period 1

January to 31 December. Companies can only claim this based on an actual amount spent on training

provided that the training met the criteria set by Fasset.

The SCG is available to levy paying members of Fasset who have an approved Mandatory Grant

Applications (combined Annual Training Report and Workplace Skills Plan for the relevant financial

year).

Employers have to submit their applications to claim this grant on or before 31 March of the following

year. The areas against which the employer may claim this grant are decided on from year to year by

the Fasset Management Board. For 2009/10, the areas that emphasised are the inclusion of disabled

persons in training and skills programmes and ABET (Adult Basic Education and Training) in the

sector.

Current learner registration statistics (at 24 October 2008) indicate that 48% of learners are black (this

includes African, Coloured and Indian people) and 0.2% of learners are people with disabilities. This

has improved from February 2002, when 34% of learners were black (this includes African, Coloured

and Indian people). However, it is also evident from the demographics of the ‘Professionals’

occupational group that black learners are not adequately integrated into the sector and the way that

Fasset disburses SCGs seeks to address this problem. In this way SDF’s can assist by not only

making use of grants and benefits provided for by Fasset, but also by creating awareness and

sensitivity to issues faced during the course of the training and inevitably during employment as well.

4.3 Learnership Cash Grant

Learnership cash grants are available to SDL paying and NLP employers who meet specific Seta

criteria, which differ from year to year.

It is very important for exempt employers to obtain a copy of the EMP201 form issued by SARS. This

form will confirm the exempt status of the company as there should be no SDL payment indicated on

this form.


Fasset offers a Learnership Cash Grant (LCG) for black and/or disabled learners on selected Fasset

Learnerships. The grant is applicable to firms employing fewer than 150 people. There is no limit on

the number of learners the firm may apply for.

For the employment of black learners, the grant is as follows:

1 year (12 months), R 11 000

2 year (24 months), R 18 000

3 year (36 months), R 27 000

There is no proof of disability or population group required. However the type of disability must be

specified. For the employment of learners with a disability, the grant is as follows:

1 year (12 months), R 19 250

2 year (24 months), R 31 500

3 year (36 months), R 47 250

It may happen that learnerships run over a shorter period – due to previous experience and

alternative, similar qualifications. In these cases RPL is used and the outcomes of the qualifications

are reached sooner than the period described above. This is perfectly acceptable and does not affect

the grant. The date specified on the commencement letter is the date which is linked to the financial

year in which the grant is claimed.

Duration of Learnership Type of Learner

FassetGrant per Black Learner

Grant per Learner with Disability

1 year (12 months)18.1 Previously Employed

R 11 000.00 R 19 250.0018.2 Previously Unemployed





Employers who implement learnerships are also able to enjoy tax deductions, available from SARS.

An amendment to the Income Tax Act, finalised in 2006, indicates the tax deductions may be claimed

from an employer for registering a learner on a Learnership (Fasset, 2008).

The salaries of learners registered on learnerships are exempt from the SDL (Fasset, 2008).


5. Unclaimed Levies

All levies (mandatory and discretionary) not claimed back, are used by Fasset to support

strategic interventions (in terms of regulations to the SDA). The Fasset Management Board

decides on these strategic interventions annually. On approval of the strategic direction for

the upcoming financial year, Fasset’s management team is able to plan the implementation of

interventions designed to improve the scarce and critical skills situation in the sector. Fasset

is currently funding ABET programmes as well as Fasset Development Projects.

5.1 ABET Programme

Half of South Africa’ s population is functionally illiterate while thirteen million people have

less than a Grade 9 level of education and four million adults have no schooling at all. This

affects the economy in a negative way as millions of adults cannot perform basic functions

such as opening a bank account.

ABET is designed to enable adult learners aged 15 and above to acquire vital skills. These

skills will help them in becoming functionally numerate and literate. Within the Fasset sector

education levels are generally high and only 3% of employees require ABET. However this

still equates to a sizeable number of people who can benefit from ABET training (Fasset,

2008).

For more information on the ABET Programmes contact:

Ms Marinda Clack of Triple E Training on Tel: (011) 668-4300; Cell: 082 806 5168 ;

Fax: (011) 086 604 4158; E-mail: [email protected]

Ms Naamochenee Pillay of Fasset Free Adult Basic Education and Training (ABET)

on Tel: (011) 476-8570, Fax: (011) 476-5756, E-mail:

[email protected].

5.2 Fasset’s Development Projects

The purpose of Fasset’s development projects is to facilitate skills development,

transformation and social upliftment in the sector. Fasset funds projects that meet specific

criteria in this regard. Unclaimed grant money is used to fund these projects.

Fasset's Management Board earmarks, on an annual basis, areas of high skills need within

the sector, based on the SSP and other research. Strategic project interventions are

identified and public tenders are advertised annually in this regard. All new projects are

approved by the Executive Committee (Exco).




All Development Projects are geared towards addressing the poor demographic profile within

the sector, and all are therefore in line with the NSDS targets:

85% Black,

54% Women,

4% Disabled.

All tenders are advertised on the Fasset Tender Notices page, in the Government Gazette, and

on the government tender board website (www.info.gov.za). Potential service providers are

advised to regularly check these public sources of information for new and updated

information.

Full details regarding the development projects funded by Fasset can be found under Fasset

Development Projects. Enquiries regarding any specific project or involvement in these can be

addressed to the Fasset Call Centre on 086 101 0001.

The current projects for 2009-10 include:

The Bonani 4 Work Readiness Programme,

The Thusanani 3 Work Readiness Programme,

The SciMathus Bridging Programme 2009,

The Thuthuka Repeat Qualifying Examination (QE) Part 1 Project 2009/10,

The Pagamani 1 Bridging Programme.

Fasset has agreed to fund another 500 learners on the Bonani 4 Work Readiness Programme. Some 1770 learners have already completed the programme. Learners will be

recruited in four provinces: Gauteng (which covers JHB and PTA), KwaZulu-Natal, the

Western Cape and the Free State. Learners from the Free State will complete their training in

Gauteng. Once their training has been completed, they will be placed in the Free State.

Bonani 4 will help to alleviate the dire shortage of accounting trainees in the Free State,

Fasset has agreed to fund an additional 200 learners on Thusanani, bringing the total

number of learners funded to date to 840.

Fasset has agreed to fund 25 learners on the SciMathus Bridging Programme. Offered by

the Institute of Mathematics and Science Teaching at the University of Stellenbosch, the ten-

month bridging programme assists African, Coloured and Indian learners to improve their

marks in Mathematics and Accountancy, so as to gain admission to higher education in the

Economic and Management Sciences. Fasset previously funded 25 learners on the

programme in 2005.


http://www.fasset.org.za/social/default.asp?thepage=current.htm

http://www.fasset.org.za/social/default.asp?thepage=current.htm

http://www.fasset.org.za/tender/default.asp

In November 2007, Fasset approved funding for 400 learners on the Thuthuka Repeat

Qualifying Examination (QE) Part 1 Programme. The first intake of learners obtained a 53%

pass rate against a national pass rate for Black candidates of 30% in 2008. The second

intake will write Part 1 of the Board Exam in March 2009. Based on the project’s success,

Fasset has agreed to fund an additional 300 learners.

Fasset is also funding 100 learners on the Pagamani Programme. The programme targets

unemployed matriculants and those with incomplete degrees or diplomas. In addition to

obtaining a Certificate and an Advanced Certificate from the Association of Accounting

Technicians (AAT), learners will also receive work-readiness training and will be placed in the

Fasset sector on Accounting Technician Learnerships.

Fasset has funded 58 projects to date. Over 11 000 individuals have benefited.

5.3 Free Training Events – Lifelong Learning

Fasset offers free training to members (both levy paying and non levy paying) who are up-to-

date with their registration with Fasset (either through their mandatory grant claim or NLP

registration). The SDF and registered organisational contact are sent marketing materials for

these events which are presented throughout the year.

This programme supports the training needs of mainly small business and the topics provided

aim to assist them in training existing staff, including learners who have been recruited on

Fasset Learnerships. The topics include content which members can apply to their own

businesses and when advising their clients and are always chosen from suggestions and

requests from Fasset stakeholders. The training can be counted towards the continuous

professional education requirements of most professional bodies and Fasset has, therefore,

termed this programme the lifelong learning programme. There is no limit to the amount of

people a company can send these events.

There are three content areas covered by the lifelong learnership:

Soft Skills e.g. Change Management, Managing Time and Stress Effectively,

Legislative Updates e.g. Budget & Tax Update, Complying with Changes in

Legislation

SDF Training e.g. Introduction to the Role of the SDF, Change Management,

Diversity Training


5.4 Fasset’s Best Practice Awards

Fasset believes it is important to showcase best practice and to celebrate success. By

showcasing best practice, Fasset hopes to disseminate best practice very broadly within the

sector, enabling organisations to benchmark themselves, while at the same time, encouraging

the sector as a whole, to raise the bar even higher in the training and people development

arena.

Fasset would like to recognise organisations that engage in Best Practice, when it comes to

Skills Development in South Africa. The aim is to distinguish organisations that promote

training and development in the Fasset sector.

Categories:

Best Practice in a large employer

Best Practice in a medium employer

Best Practice in a small employer

Best Practice in a registered non-levy paying employer

Application forms are available on Fasset’s website and the deadline for submissions is the

29th of May 2009.

6. Monitoring Grant Payments from Fasset

Fasset schedules regular grant payment dates and endeavours to make grant payments

according to this schedule. Payments are made electronically through an electronic fund

transfer and your bank statement will show your SDL number as a reference. Planned

payment dates are provided on the Fasset website.

All registered SDFs have direct access to on-line account details. This access can be

obtained on the stakeholder log-in section of the Fasset website using the user name and

password issued by the Fasset Call Centre. Once logged on to the system, you simply need

to select the ‘Grants & levies’ tab, followed by the year you wish to view.

If the levies Fasset has received from SARS do not match the actual payments made, please

contact your local SARS branch. They will require copies of your SDL 201 remittance advices

and proof of payment.

Please remember that all Setas only receive (and therefore only record) levies approximately

two months in arrears.


There will, however, be instances where planned payments are not possible. If Fasset has

not received levies from SARS, or specific ad hoc grants have to be paid, grant payments will

not be made according to the schedule. It is also very important to ensure that the

confirmation of bank details submitted with your mandatory grant claim corresponds to your

company name. Any difference in the name on the cancelled cheque or letter from the bank

can lead to delays in payment. It may also happen that a company pays SDL despite being

under the threshold – in this case, grants will not be paid out until a company’s “NLP” status

has been adjusted.

Feel free to contact the Fasset call centre if you have any queries on the amounts or timing of

your grants.


Section 6: Understanding Learnerships

1. What is a Learnership?

A Learnership is a structured learnership that leads to a qualification and includes both

structured work experience (practical) and structured institutional learning (theory). A

learnership used to be called a learnership.

1.1 Characteristics of a Learnership

Criteria, as set out in the SDA, indicate that a Learnership must:

Include a structured learning component,

Include practical work experience related to the qualification,

Lead to a qualification registered on SAQA,

Relate to an occupation,

Be registered with the DoL.

1.2 Why Learnerships?

Learnerships were established as a result of the SDA and SDLA - to implement structures

and processes to transform skills development in South Africa. The new NQF Act of 2008

describes learnerships under the generic banner of “learning programmes”.

A critical look at how employers and training providers have provided education, training and

work experience in the past indicates that education and training provision has not always

linked theory and practice.

Learnerships are intended to address the gap between current education and training

provision and the needs of the labour market and are often seen as the crux of skills

upliftment in terms of the SDA.

Learnerships seek to address the following labour market issues:

the decline in levels of employment in South Africa,

the unequal distribution of income,

unequal access to education and training, and employment opportunities,

the effects of race, gender and geographical location on advancement,

the skills shortage amongst the labour force.


1.3 Benefits of Learnerships

Learnerships are important because:

The programmes are outcomes-based,

The learner interacts within the working environment (practical),

The learner interacts with clients and obtains an understanding of workplace

dynamics,

Assessment occurs at various stages and is based on the learners’ competence

(learner centered),

The qualification is recognised nationally but is also benchmarked against

international standards.

1.4 Learnerships vs. Apprenticeships

Learnerships are similar to the old apprenticeships. Both are work-based routes for learning

and gaining qualifications. Learnerships however aim to integrate theoretical education and

skills training in both the learnership itself and the assessment (Botha, Kiley & Truman, 2007).

In contrast to apprenticeships, learnerships lead to SAQA registered qualification. Also, up

until now tax rebates have only been available for DoL registered learnerships. The new Skills

Development Act allows for the inclusions of a variety of learning programmes to be included

under the phrase “learnership”. These include apprenticeships and skills programmes. This

ensures an inclusive approach to grants and rebates in fields of learning where learnerships

have not been registered.

2. Learnerships AvailableIt is each Setas responsibility to register Learnerships relevant to its sector. FassetQA quality

assures a wide variety of Learnerships in the accounting and finance area.

Examples of Fasset Registered Learnerships: Professional Qualification: Chartered Certified Accountant offered through ACCA,

Post Graduate Professional Qualification: Professional Accountant in Business

offered through SAIPA.

All Learnerships are registered with the DoL. For a comprehensive list, visit their website at

www.labour.gov.za.

Due to the new NQF Act, the regulation of Learnerships, these are up for discussion again.

So far it is clear from the discussion document that unregulated learnerships will also be

allowed. However, if this training is to lead to an occupational qualification, the provider must

be accredited and the workplace for practical training must be approved. For some generic

training, such as performance enhancement, moral boosting and team building, the providers

will not need to be accredited. No statements of results will be involved and the training will


http://www.labour.gov.za/

mostly not be occupationally specific. Regulation will obviously be required for learnerships

such as apprenticeships and other learnerships that lead to occupational statements of

results. It has not yet been decided whether skills programmes will be regulated.

It seems that the Department is considering a learning contract for skills programmes if they

are to be regulated. It is not clear yet what the scope of such a contract will be and who will

administer and manage these contracts.

2.1 Fasset Learnerships

Fasset runs four types of learnerships. Fasset’s learnerships are, for the most part, developed

and managed by their professional bodies. This is the most common type of learnership.

There are however other ways in which they manage their learnerships. The list below will

provide with an indication of how their learnerships function:

1. SAICA (South African Institute of Chartered Accountants) Learnerships

SAICA runs two learnerships: Chartered Accountant: Audit Specialism and Chartered

Accountant: Financial Management.

SAICA is responsible for all aspects of these learnerships. They will register the learner as

well as register the learnership agreements. In order to participate in the learnership

employers will need to contact SAICA directly.

2. Professional Body Learnerships

Fasset has seven professional bodies that have registered learnerships learners and

employers will need to contact the respective professional bodies directly, should they wish to

register a learner on one of these learnerships. The professional bodies will provide the

employer/learner with the necessary information regarding entrance requirements,

registration, examinations, workplace experience, training providers and workplace

assessments.

For these learnerships Fasset registers the learnership agreements. Consequently,

employers and learners will need to ascertain from the professional body whether they need

to submit the learnership agreements to Fasset or whether the professional body will submit

the agreement on behalf of the employer. The employer must ensure that they are an

accredited workplace with the professional body as well as ensure that the learner is

registered, before a learnership agreement can be registered with Fasset.

3. Debt Recovery Learnership


The Debt Recovery Learnership is the only learnership that is directly managed by Fasset. In

order to participate in the Debt Recovery Learnership an employer would need to become an

accredited workplace. This involves completing the Workplace Accreditation Application

Form and a site visit from Fasset, in order to ensure that the employer can offer the practical

experience component of the learnership. The employer would also need to select an

accredited training provider for the theoretical portion of the learnership.

4. Other Seta Learnerships

Any employer is able to register a learner on any learnership. Should an employer wish to

make use of another Seta’s learnership, there will need to be a Memorandum of

Understanding (MOU) in place between the two Setas in question. This will help define the

various responsibilities and implementation variations that take place across different Setas.

Fasset, however, only makes grants available to employers in Fasset’s sector that are training

on Fasset learnerships or on a select number of learnerships with other Setas.

The list of learnerships from other Setas that allow access to the Learnerships Cash Grant is

as follows:

SETA Title of Qualification SAQA QUAL ID

NQF Level

BANKSETA Diploma: Technician: Internal Auditing 20358 NQF 6

BANKSETA Diploma: Treasury : International Banking 20334 NQF 5

INSETA Postgraduate Diploma : Financial Planning 48866 NQF 7

SERVICES SETA

Further Education and Training Certificate :Small Business Advising (Information Support) 48883 NQF 4

SERVICES SETA National Certificate : Business Advising 48886 NQF 5

SERVICES SETA

National Certificate: Business Consulting Practice (Enterprise Resource Planning) 48874 NQF 5

Employers need to contact the relevant Seta directly for more information on these

learnerships. Learnership agreements for these learnerships need to come directly to Fasset,

who will register the agreement.


The list of particular Fasset learnerships is given below:

TITLE NLRD No. NQF PROFESSIONAL BODY

1

Professional Qualification: Chartered Certified AccountantThe Chartered Certified Accountant Programme confers the designation ACCA. Members are recognised to perform the Audit Function in the UK and certain European and other countries. Employees without formal tertiary qualifications gain access by means of the Professional Qualification: Chartered Certified Accountant Programme.

20399 7Association of Chartered Certified Accountants (ACCA )Ms Cindy Parvess(011) 459 [email protected]

2

Certificate: Certified Accounting TechnicianCertified Accounting Technicians function as accounts support staff offering assistance to professional Accountants. This qualification affords access for employees without formal tertiary qualifications, to the ACCA Chartered Certified Accountant designation.

20397 5

3

Professional Qualification: Chartered Management Accountant Allows learners who meet the minimum entrance requirements and successfully complete this qualification to register as Chartered Management Accountants with the designation ACMA.

20400 7

Chartered Institute of Management Accountants (CIMA )Ms Charleen Davids(011)788 [email protected]

4

National Diploma: Management AccountingIdeal for individuals moving into management positions and for those who wish to begin specialising in Management Accounting. Includes, among others, the roles of Cost Accountant, Accountant, Management Accountant and Financial Manager.

24406 6

5

National Certificate: Business AccountingIdeal for learners entering the workplace who will be involved in providing accounting support services and also aimed at current employees in similar positions who require a formal certificate in basic accounting skills.

24418 5

6

Post Graduate Professional Qualification: Professional Accountant in Business Commerce and Industry members of the Institute provide a number of accountancy related services to companies, close corporations, partnerships, sole proprietors, trusts and various other types of small business and non-corporate undertakings.

20392 7

South African Institute of Professional Accountants (SAIPA)Ms Angela Forrest011 207 [email protected]

7 Post Graduate Diploma: Professional Accountant in PracticePractising members of the Institute perform duties as an Accounting Officer and provide a number of accountancy related services to companies, close corporations, partnerships, sole proprietors, trusts and various other types

20391 7


http://www.fasset.org.za/downloads/learnerships/saipa_professional_accountant_practice_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/saipa_professional_accountant_practice_learnership.pdf


http://www.fasset.org.za/downloads/learnerships/saipa_professional_accountant_business.pdf

http://www.fasset.org.za/downloads/learnerships/saipa_professional_accountant_business.pdf

http://www.fasset.org.za/downloads/learnerships/cima_certificate_business_accounting_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/cima_diploma_management_accounting%20_learnership.pdf



http://www.fasset.org.za/downloads/learnerships/cima_chartered_management_accountant_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/cima_chartered_management_accountant_learnership.pdf

http://www.fasset.org.za/downloads/acca_cat_learnership.pdf


http://www.fasset.org.za/downloads/learnerships/acca_professional_qualification_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/acca_professional_qualification_learnership.pdf


of small business and non-corporate undertakings.

8

Diploma: Accounting TechnicianEnables new entrants into the financial sector to become proficient in their career as an Accounting Technician or Accounting Support Professional. Learners support and assist senior professionally qualified Accountants in the fields of finance, management accounting, taxation, auditing and payroll.

20402 5

Association of Accounting Technicians AAT(SA)(011) – 621 [email protected]

9

Certificate: Local Government AccountingThis Learnership is based on a qualification awarded by the AAT. The Local Government Accounting Learnership is specifically aimed at learners who are employed in Local Government. This qualification provides an ideal entry point for those wanting to begin a career in local government accounting.

59751NEW 3

10

National Certificate: BookkeepingThis qualification previously known as the Cerficate for Registered Clerk aims at equipping learners to perform the Accounting function in small organisations and to provide support to Financial Administrators, Accounting Technicians, Accountants and Financial Managers in medium and large organisations so that the Accounting and Financial Management functions can be performed effectively.

58375 3

Institute of Certified Bookkeepers (ICB)Wedaad Shira(021) 421 [email protected]

11

National Diploma: Technical Financial AccountantFinancial Accounting Technicians undertake basic Bookkeeping and Accounting procedures in a variety of situations. They function within general Accounting and Financial Management roles where they lend support to the Accountant and/or the Financial Manager.

36213 5

12

National Certificate Small Business Financial ManagementSpecifically designed for those learners who are, or wish to become, owner-managers and for learners who are responsible for the keeping of financial records of a small business.

48736 4

13

Certificate: Office AdministrationThe Learnership in Office Administration is aimed at people in clerical and administrative positions in all businesses in all industries. An Office Administrator provides a supportive role in any business.

23618NEW 5

14 Further Education and Training Certificate: BookkeepingAims at equipping learners to perform the

28130 4


http://www.fasset.org.za/downloads/learnerships/icb_fetc_bookeeping.pdf

http://www.fasset.org.za/downloads/learnerships/icb_fetc_bookeeping.pdf

http://www.fasset.org.za/downloads/learnerships/icb_office_administration_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/icb_small_business_financial_management_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/icb_small_business_financial_management_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/icb_technical_financial_accounting_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/icb_technical_financial_accounting_learnership.pdf


http://www.fasset.org.za/downloads/learnerships/icb_national_certificate_bookkeepin_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/aat_local_government_accounting_learnership.pdf


http://www.fasset.org.za/downloads/learnerships/aat_accounting_technician_learnership.pdf


Accounting function in small organisations and to provide support to Accountants and Financial Managers in medium and large organisations so that the accounting and financial Management functions can be performed effectively.

15

Certificate: Public Sector AccountingSpecifically designed for Accounts Administrator in the public sector who realise the importance of completing a professional qualification that will equip them with the necessary skills to cope effectively with the demands of their changing environment.

20352 4

IPFAMs Innocentia Choba(012) 470 [email protected]

16

Diploma: Public Sector AccountingSpecifically designed for Accounting Technician in the public sector who realise the importance of completing a professional qualification that will equip them with the necessary skills to cope effectively with the demands of their changing environment.

20353 5

17

Chartered Accountant : AuditingThe Audit Specialism focuses specifically on Auditing, allowing registered Chartered Accountants to approve annual financial statements in Public Accounting and Auditing Practice when registered with the Public Accountants’ and Auditors’ Board.

48913 7

South African Institute of Chartered Accountants (SAICA)Mr Geoffrey Ngonyama(011) 621 [email protected]

18

Chartered Accountant: Financial ManagementChartered Accountants function as Heads of Accounts Departments in the roles of Financial Director, Chief Financial Officer, Financial Manager and Financial Controller. Experienced Chartered Accountants have ample opportunity to move into specialist, operational and frontline positions.

48912 7

19

FET Certificate: Debt RecoveryThis is for any individual who is or wishes to be involved in the Debt Recovery function within the business sector and is intended to enhance the provision of service within the field of Debt Recovery within the business and commerce sector.

49021 4

FassetMs Unathi Jakalase (011) 476 [email protected]

20

Certificate: General Internal AuditingThe purpose of the GIA qualification is to provide a second step in the career path of an internal auditor building on the foundation of awareness established in the first level qualification (IAT). The GIA will enable the learner to perform the functions and move into the refinement of soft skills and management responsibilities associated with the discipline.

20359 7

Institute of Internal Auditors (IIA)Mr Lawrence Chetty(011) 450 1040 [email protected]



http://www.fasset.org.za/downloads/learnerships/iia_gia_learnership.pdf



http://www.fasset.org.za/downloads/learnerships/debt_recovery_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/saica_financial_management_specialism_learnership.pdf


http://www.fasset.org.za/downloads/learnerships/saica_audit_specialism_learnership.pdf

http://www.fasset.org.za/downloads/learnerships/ipfa_diploma_public_sector_accounting_learnership.pdf


http://www.fasset.org.za/downloads/learnerships/ipfa_certificate_public_sector_accounting_learnership.pdf

Section 7: Implementing and Managing Learnerships

1. Embarking on a Learnership

The implementation of a Learnership is often initiated in one of two ways:

The employer has an existing employee who has requested to be developed/who the

employer has earmarked for development or,

The employer has identified a Learnership they can run/have run in the past and is

now looking for a learner.

The first step in implementing a Learnership is to select a Learnership that will address the

company’s needs. The company should then investigate the requirements of running the

Learnership and apply for accreditation as a provider with the relevant ETQA or professional

body.

1.1 Selecting a Learner

When selecting an employee to be enrolled on a Learnership the employer should consult

with the employee and ensure that the Learnership supports the employee’s chosen career

path.

Previously employed learners are referred to as 18.1 learners,

Previously unemployed learners are referred to as 18.2 learners.

The previously unemployed learner will be paid an allowance (instead of a salary) while the

learner works towards a qualification and gains work place experience. The employed

learner will receive a negotiated salary during the course of the Learnership and may also

need to be reimbursed for learning material, travel costs and other fees.

2. Enrolling Learners onto a Learnership

The employer should ensure that the following is in place when enrolling a learner onto a

Learnership:

A signed employment contract,

A signed Learnership Agreement.


2.1 Learnership Agreement

The Learnership Agreement has to be signed by the learner, the employer and the training

provider. If the agreement is being signed for the practical component, then the employer and

the training provider are the same organisation. The employer and the learner must initial

each page.

The Learnership agreement can be downloaded from Fasset’s website.

2.1.1 Purpose of Learnership Agreement

The purpose of the Agreement is to outline the rights and responsibilities of the learner,

employer and training provider.

The Learner

The learner has the right to:

be educated and trained in terms of this Agreement,

have access to the required resources to receive training in terms of the Learnership,

have his or her performance in training assessed and have access to the

assessment results,

receive a certificate upon successful completion of the learning,

raise grievances in writing with the Seta concerning any shortcomings in the training.

The learner must:

work for the employer as part of the learning process,

be available for and participate in all learning and work experience required by the

Learnership,

comply with workplace policies and procedures,

complete any timesheets or any written assessment tools supplied by the employer

to record relevant workplace experience and

attend all study periods and theoretical learning sessions with the training provider

and undertake all learning conscientiously.

The Employer

The employer has the right to require the learner to:

perform duties in terms of this Agreement and

comply with the rules and regulations concerning the employer’s business concern.

The employer must:

comply with its duties in terms of the Act and all applicable legislation including:

o Basic Conditions of Employment Act 75 of 1997,


o Labour Relations Act 66 of 1995,

o Employment Equity Act 55 of 1998,

o Occupational Health and Safety Act 85 of 1993 (or Mine Health and Safety

Act 27 of 1996),

o Compensation for Occupational Injuries and Diseases Act 130 of 1993,

o Unemployment Insurance Act 30 of 1996.

provide the learner with appropriate training in the work environment to achieve the

relevant outcomes required by the Learnership,

provide appropriate facilities to train the learner in accordance with the workplace

component of learning,

provide the learner with adequate supervision at work,

release the learner during normal working hours to attend off-the-job education and

training required by the Learnership,

pay the learner the agreed learning allowance both while the learner is working for

the employer and while the learner is attending approved off-the-job training,

conduct on-the-job assessment, or cause it to be conducted,

keep up to date records of learning and periodically discuss progress with the

learner,

if the learner was not in the employment of the employer at the time of concluding

this Agreement, advise the learner of:

o the terms and conditions of his or her employment, including the learning

allowance and

o workplace policies and procedures.

apply the same disciplinary, grievance and dispute resolution procedures to the

learner as to other employees.

Training Provider

The training provider has the right:

of access to the learner’s books, learning material and workplace, if required.

The training provider must:

provide education and training in terms of the Learnership,

provide the learner support as required by the Learnership,

record, monitor and retain details of training provided to the learner in terms of the

Learnership,

conduct off-the-job assessment in terms of the Learnership, or cause it to be

conducted and

provide reports to the employer on the learner’s performance.


2.2 Registering the Learner on the Learnership

In order to register the learner on a Learnership the employer will first have to register the

learner with the relevant professional body and / or training provider. A number of documents

have to be submitted to Fasset to register the learner:

Submit the Learnership Agreement to Fasset:

Signed copy of employment contract for each learner,

Proof of learner registration with professional body e.g. CIMA, SAIPA etc (student

number),

Employer accreditation status with professional body (copy of letter/certificate),

Copy of employment letter / letter of appointment,

Proof that levy payments to SARS are up-to-date,

Proof of Approval of Workplace Skills Plan (Mandatory Grant) or Proof of Tax

clearance/exemption letter/Fasset E number or certificate from SARS if not paying

levy,

Learner ID copy.

Please Note:

New regulations governing the registration of Learnership agreements require the

FSA to register the Learnership agreement within 30 days of receipt.

If the agreement is pending outstanding information, it will be rejected within seven

days of receipt and the employer will therefore have to resubmit with all required

documents.

If all the required documents are attached, Fasset will issue the employer with a

Confirmation Letter. The Confirmation Letter may be used for the LCG Learnership

Grant application and the SARS Tax Deduction.

3. Running the Learnership

Once the Learnership has been registered the employer should provide training to the

learners according to the Learnership curriculum. The professional body or training provider

through which the Learnership is offered will be able to guide the employer in its

responsibilities.

3.1 Supporting the Learner

The company has to provide support to the learner during the term of the Learnership. The

following methods can be used to create a supportive and enabling environment for the

learner.


3.1.1 Induction

The aim of a Learnership is to induct the learner into the work environment. The employer

should induct new employees to:

the goals of the organisation,

policies and procedures,

values,

tasks with outcomes to be achieved and

the equipment and other resources to be used.

3.1.2 Mentoring

It is important to provide support to the learner through mentoring and feedback and keep

records of all training interventions. The mentor will act as coach and counsellor and should

monitor the learner’s progress.

3.2 Reporting and Administration

Employers are encouraged to develop an information system (electronically or manually) that

will be used for record keeping. And design an attendance register that is completed at every

training event and retained. Systems must be in place to monitor progress. These records

will be needed to report to Fasset on training that took place.

References

Botha, J.A., Kiley, J. & Truman, K. 2007. Practicing Education, Training and Development

in South African Organisations. Juta & Company, South Africa.

Cloete, H.C.A. 2005. South Africa Works. Rapid Access Publishers.

Department of Labour. 2005. Findings from the National Skills Survey of 2003 on skills

development in South African enterprises

Erasmus, B.J. & Van Dyk, P.S. 2004. Training Management in South Africa. 3rd Edition.

Oxford Southern Africa.

SAQA. 2008. NQF History, A brief history. [Available on Internet] www.saqa.org.za.

Rainbow SA. 2009. The National Skills Development Handbook.

Fasset. 2008. Getting Started.

Fasset. 2009. Fasset. [Available on Internet] www.fasset.org.za.

UJ, 03.09, University of Johannesburg Newsletter, Issue 1, 6 March 2009. March 2009. No: 1



Handy Resources

www.fasset.org.za

www.saqa.org.za (Information about SAQA, its regulatory bodies and unit standards are

constantly updated.)

www.polity.org.za (This website contains all the acts referred to and will enable you to

stay updated with changes in policies and legislation)

www.skillsportal.co.za (News on all aspects of Skills Development, Education and

Training)

www.thrive.co.za (Info on Skills Development and Accreditation)

www.rainbowsa.co.za. Company who developed The National Skills Development

Handbook. (Everything you need to know about Skills Development in South Africa –

can be ordered through their website or through Thrive, www.thrive.co.za).


http://www.rainbowsa.co.za/


fasset skills development€¦ · web view20359 7 institute of internal auditors (iia) mr lawrence...

Documents