FARM WITH PRECISIONWITH NEW HOLLAND

WELCOME TO THE WORLD OF PLM

FARM WITH PRECISION WITH NEW HOLLAND New Holland offers a full range of complete guidance solutions that can be tailored to suit your individual needs. With a full rangeof correction signals, New Holland’s modular solution can be used on any machine. Intuitive, user-friendly interfaces mean youcan use guidance with confidence and Precision Land Management software enables you to download and analyse yield datato fine tune inputs and reduce costs. Advanced telematics systems enable you to synchronise in-field working betweenmachines from the comfort of your office. If you are ready to start saving time and money, working more comfortably and gettingmore out of every season with precision farming, New Holland Precision Land Management is waiting for you.

PLM® GUIDANCE SOLUTIONSNew Holland offers a range of intuitive autoguidancesolutions to meet your needs, from entry-level manualguidance, via assisted guidance right through to top of therange fully integrated autoguidance which effectivelymanages the machine for you. These solutions can bematched to a range of correction signals, from sub 20cmright down to sub 2.5cm absolute accuracy depending onyour needs. You might be thinking what about myimplement? Well, New Holland offers solutions for its entirerange of tractor, harvesting, and crop managementequipment, including all implements, meaning you canchoose the right tool for your operation.

PAGES 6 - 23

PLM® CROP MANAGEMENT SOLUTIONSIn order to get the most out of every square inch of field, a full range of crop management solutions are available.Variable rate and section control enable you to maximiseyields and reduce costly over and underlaps. Yieldmonitoring, available on combine and forage harvestersmeans you can see just how productive your fields are, andwhen combined with PLM software, you can counteractareas of lower yields. Advanced moisture monitoringtechnology enables the precise amount of additiveapplication when foraging, baling or combining, and it alsoenables you to precisely calculate drying costs.

PAGES 24 - 29

2 3

FERT

ILIS

ATIO

N

PR

OTECTIONYIELD SENSOR MOISTURE MONITOR

DATA

DESKTOPCOM

PUTERSEEDING

CULTIVATION

DATA CARD PRESCRIPTIONS MAPSOIL

ANALYSI

SYI

ELD

MAP

CROP

MANAGEMENT

DATA

MANAGEMEN

TSUPPORT

GUIDANCE

AND DISPLAYS

PLM FROM THE CLEAN ENERGY LEADERNew Holland is committed to improving the environmental profile of farming and PLMforms a key element of this strategy. By reducing in-field passes considerable fuelsavings can be achieved, which consequently reduce your farm’s carbon footprint. Butthat is not all, by controlling inputs, such as fertilisers, the environmental impact offarming is cut considerably. After all, that’s what you’ve come to expect from the CleanEnergy Leader.

PLM® DATA MANAGEMENT SOLUTIONSYou are never alone with New Holland’s PLM® solutions. A comprehensive software package enables you to manageall aspects of your farm to enhance productivity and reducesoaring input costs. Telematics technology enables fleetmanagers to connect to their machines from the comfort oftheir office. You can stay in touch with your machines at alltimes, and you can send and receive real-time informationthat saves time and enhances productivity. Choose betweenthe entry level Essential Package or upgrade to the advancedProfessional Package depending on your individual needs.

PLM® SUPPORT SOLUTIONSAll of your PLM questions can be answered via the PLM®

Portal, furthermore, a dedicated call centre is always onhand to provide further assistance should the need arise. If you want to unlock all of the performance boostingfeatures, then enroll, via the PLM® Academy, on one of thetraining courses to become an expert in your field.Furthermore the PLM dealer certification gives you the peaceof mind to know that you are dealing with a true PLM expert.

Sustainable Efficient Technology

PAGES 30 - 33 PAGES 34 - 36

WHAT LEVEL OF PRECISION DO YOU NEED?

EGNOS OFFER SUB 20CM ACCURACYEGNOS offer accuracy of 20cm. This means that you can come back to the samepoint in your field pass after pass and be within 20cm of where you were before. Thissystem is perfect for operators that simply want to get in and drive away and is bestsuited to crop spraying and tillage applications where accuracy and repeatabilityare not of prime concern.

OMNISTAR G2, XP AND HP OFFER SUB 12CM ACCURACYOmniSTAR XP and G2 provide 12cm accuracy, andthey are ideal for high performance broadacrespraying and land tillage applications.The OmniSTARG2 system is perfect for operations which rely heavilyon guidance and demand an around-the-clockuninterrupted signal, this is guaranteed as GLONASSsatellites are used in addition to GPS satellites. Thehighest levels of accuracy can be obtained withOmniSTAR HP correction signals with accuracy levelsas high as 10cm, this makes it the natural choice whenconducting broadacre seeding and harvesting.

CENTERPOINT RTX PROVIDES REMOTE FARMS WITH SUB 4CM ACCURACY For businesses in the most remote locations, or that cover vast areas, CenterPointRTX uses a network of satellites to broadcast correction signals to keep yourmachine on the straight and narrow. GPS and GLONASS enabled to provideoutstanding repeatability and reliability.

EGNOS

OmniSTAR HP

CenterPoint RTX

New Holland autoguidance solutions are compatible with a full range of guidance correction signals so that you can choose theexact level of precision that your operation requires. GPS and GLONASS correction signals are transmitted via a network ofsatellites that orbit the Earth and land based receivers can then determine their own position in relation to these signals.However, this alone is not accurate enough for agriculture, therefore a correction signal must also be used.

The Global Positioning System (GPS) is a space based satellite navigation system and is part of a larger system called the GlobalNavigation Satellite System (GNSS). GNSS is a term used for all satellite constellation systems used to provide positioning data.Currently GNSS only covers GPS and GLONASS systems. GLONASS is similar to GPS and both are available worldwide. Whenauto guidance receivers track both GPS and GLONASS signals together, the number of 'visible' satellites is greatly increasedwhich reduces the risk of losing satellite coverage for increased uptime.

OmniSTAR G2 and XP

4 5

RANGEPOINT RTX OFFERS 15CM ACCURACY RangePoint RTX is a new low cost correction signal that provides areliable, 15cm, pass to pass accuracy and is GPS and GLONASSenabled. This is ideal for all spraying and fertiliser applications.

RTX

� Recommended

RTK VRSRTK

RTK Corrections

THE EXTENSIVE RTK RANGE OFFERS UP TO 2.5CM ABSOLUTE ACCURACYRTK Radio Transmission uses a network of basestations in conjunction with radio correction signalsto broadcast within a 12.87km radius of the basestations, when not obstructed by hilly terrain. RTKVRS uses your mobile telephone network to preciselylocate your machine and provide real-time correctionsignals, without the need for base stations. With thislevel of accuracy you can conduct row cropapplications, strip tilling, land levelling and evendrainage applications which require precisehorizontal and vertical accuracy. Quite simply, it’s themost accurate precision farming solution around,together with accurate repeatability.

XFILL: BACKUP FOR AN RTK SIGNALCustomers that work in rollingterrain, or when topographyblocks the line of sight from thebase station, XFill technologyoffers a reliable solution. XFill isa dependable backup system,which provides up to 20 minutesof correction following the lossof an RTK signal.

XFILL™ TECHNOLOGY RTK Corrections

AUTONOMOUS EGNOS/ RangePoint OmniSTAR CenterPoint™ RTK OmniSTAR VBS RTX GNSS/XP/HP RTX RTK VRS

PRECISION 30 - 45cm 20cm 15cm 12 - 10cm 4cm 2.5cm

APPLICATION

Spraying � � � � � �

Spreading � � � � � �

Tillage � � � � � �

Mapping � � � � � �

Mowing � � � � �

Harvesting � � �

Seeding � � �

Hoeing � �

Bed Forming � �

Precision Planting � �

Strip Till � �

HOW ARE GUIDANCE SIGNALSTRANSMITTED AND RECEIVED?New Holland offers a wide range of receivers and antennas so that you can select the model which perfectly matchesyour guidance needs. From top of the range models with full IntelliSteer® compatibility to the entry level option, whichenables you to create simple yield maps, you’ll find the right solution. From base stations which transmit RTK signals,to the DCM-300 Modem which receives RTK VRS correction signals and advanced terrain compensation technology,you’ve got guidance covered on your farm.

SIGNAL TRANSMISSION, RECEPTION AND COMPENSATION

NH 062 RECEIVERThis entry level antenna can be used for mapping and is fully compatible with EGNOScorrection signals.

NH 162 RECEIVERThis standard receiver can be used for yield or field mapping and is Autopilot™compatible. It can receive EGNOS correction signals and is a differential GPS receiver. It boasts a strong magnetic attachment as well as a simulated radar output.

NH 372 RECEIVER This top of the range receiver is compatible with RTK Radio Transmission, RTK VRS,OmniSTAR and GLONASS correction signals to guarantee year round, and seasonafter season productivity and accuracy. Its slim profile makes it perfect for all machines.

AG 715 RADIOThe integrated RTK radio is designed for use with the NH 372 receiver and built for theagricultural environment. It is fully sealed against dust and rain. The AG 715 radio easilymounts under the NH 372 receiver housing.

AG 15 ANTENNA This antenna is fully compatible with the EZ-Guide® 250 monitor, and when used inconjunction with EGNOS correction signals, it enables pass-to-pass accuracy of 20cmand year-on-year accuracy of 90cm.

AG 25 ANTENNAThis antenna can be combined with the FM-750 FM-1000 and XCN-2050™ monitors, andis fully compatible with the full range of correction signals, including GPS, GLONASSOmniSTAR and RTK, where a RTK radio is used.

DCM-300 MODEMThis is more than just a standard modem, it is your passport to enhanced productivity. It can receive the RTK VRS correction signal, but that is not all. It plays a fundamentalrole in the PLM® Connect Telematics applications, by transmitting and receiving keydata to enhance productivity and reduce losses. It can also be linked to PLM®

Software packages to transfer pre-prepared prescription maps and guidance paths.

NAVIGATION CONTROLLER IIEmploying the industry leading T3™ Terrain Compensation technology, theNavigation Controller II takes position information from the DGPS receiver, and sendsprecise steering instructions to the vehicle, ensuring on-line performance in even themost undulating and rough terrain.

6 7

T3™ TERRAIN COMPENSATIONThe T3™ Terrain Compensation systemuses sensors to calculate and correct theroll, pitch and yaw of the machine to helpminimise skips and overlaps in areas withrolling terrain and rough ground.

T2™ TERRAIN COMPENSATIONThe T2™ Terrain Compensation systemuses sensors to calculate and correct theroll and yaw of the machine to helpminimise skips and overlaps in areas withrolling terrain and rough ground.

RTK BASE STATIONThe base station is comprised of anantenna, receiver and radio link to provide RTK correction signals to theautoguidance system. Furthermore, thebase stations can receive both GPS andGLONASS signals. These stations have aworking radius of up to 12.87km, andsignal amplifiers can be positioned in hillyor forested areas to maintain coverage.The base station can either be fixed in onelocation or moved to suit your individualneeds. Easy to use, they offer the ultimatein year-on-year accuracy and repeatability.

ROLL YAW

ROLLPITCH YAW

LIGHTING UP THE WAY WITH MANUAL GUIDANCE

PLM MANUAL GUIDANCE

GET ON AND GO SIMPLICITYThe EZ-Guide® 250 is an easy to use and affordable tool that offers up to +/-20cm pass-to-pass accuracy. The built inOnPath® filter technology provides improved pass-to-pass accuracy and the EZ-Guide 250 is compatible with all makesand models of equipment.

EZ-GUIDE® 250 DISPLAY

The entry level guidance solution allows you to explore GPS guidance through a simple and affordable lightbar display.A lightbar based guidance system provides you with visual feedback to keep you on your intended path. You simplyneed to follow the green lights to stay on the right path. It even shows you which direction you need to steer in and byhow much to keep your machine on the straight and narrow!

GUIDANCE OPTIONS WITH EZ-GUIDE® 250• Manual guidance - Lightbar.• Assisted guidance with EZ-Steer™ system.

ACCURACY LEVELS

• 11cm colour screenChoose between planand 3D perspectiveviews, to see at a glancewhere you are and whatyou’ve been doing.

Seven guidance patternsOffer guidance flexibility, allowing you towork in different patterns and shapes thatbest fit your fields’ layout and contours.

• USB stickSimply transfer your day’scoverage maps to yourcomputer using a USB stickand easily print out coveragereports and import/exportfield and coverage maps via the same USB.

• Built-in GPS receiverProvides submeter accuracy, or EGNOS 20cm pass-to-passaccuracy with optional antenna.

Night or Day useSwitch to Night Mode forbetter visibility when workingin low light conditions. Markand locate in-field hazardswith feature mapping. Findthe next path easily withSwathFinder assistance.

• OnPath® filter technologyFor improved pass-to-passaccuracy.

• GPS data outputTo supply GPS positiondata to your combine orforage harvester displayfor yield monitoring.

• Field Finder technologyAutomatically locate storedfields as you drive near them.

• Radar speed output

• 15 Bright guidance LEDsGive you quick visual feedbackto keep you on track.

30 35 40 45

AUTONOMOUS30 - 45 cm

10 15 20 25

20 cm

EGNOS

8 9

HEADLAND PIVOT A-B ADAPTIVE A+ IDENTICAL FREEFORM™PATTERN CURVE PATTERN CURVE

GUIDANCE OPTIONS WITH FM-750• Manual - Lightbar.• Assisted guidance with EZ-Steer™

and EZ-Pilot™ systems.• Integrated autoguidance

with retrofit Autopilot™ system.

ACCURACY LEVELS

30 35 40 45

10 - 12 cm

8 9 10 11

4 cm

2 3 54

15 cm

9 10 11 12 13 14

2.5 cm

0 1 2

RTK/RTK VRSAUTONOMOUS30 - 45 cm

OmniSTAR

10 15 20 25

20 cm

GNSS/XP/HPEGNOS

CenterPointRTX

RangePointRTX

THE CORNERSTONE OF GUIDANCE, CAPABLE OF 2.5CM ACCURACY The FM-750 is a multi-function display, and has a built-in receiver that allows you to choose the accuracy your applicationrequires from +/-20cm to +/-2.5cm pass-to-pass and year-on-year. When you need a DGPS guidance system that savesyou time, fuel and inputs, look no further than the FM-750.

• Field-IQ™ crop inputcontrol systems compatibleUse section control andvariable rate applicationcontrol technology to preventseed and fertiliser overlapand manage the rate of seed,liquid or granular application.

• Planter and sprayermonitoring and control

Seven guidance patternsOffers guidance flexibility, allowing you towork in different patterns and shapes thatbest fit the layout and contours of your field.

• USB stickSimply transfer your day’scoverage maps to yourcomputer using a USB stickand easily print out coveragereports and import/exportfield and coverage maps via the same USB.

• 20.3cm touch screenOffers an all new intuitiveuser experience. Switch to Night Mode for bettervisibility at night. At row ends,easily find the next path withSwathFinder assistance.

• Built-in GPS and GLONASS receiver Upgrade to receive GLONASSsatellites and increase yoursatellite availability to extendyour operating hours.

• 27 bright guidance LEDsGive you quick on-linevisual feedback to keepyou on track.

• Attachable RTK Radio

• Dual external Video input

• Field Finder TechnologyAutomatically locate storedfields as you drive nearthem.

External lightbarPosition the optional lightbar justwhere you want for at-a-glanceguidance path information.

FM-750 DISPLAY

HEADLAND PIVOT A-B ADAPTIVE A+ IDENTICAL FREEFORM™PATTERN CURVE PATTERN CURVE

GUIDANCE OPTIONS WITH FM-1000 AND XCN-2050• Manual - Lightbar.• Assisted guidance with EZ-Pilot™ system.• Integrated autoguidance

with retrofit Autopilot™ system.

ACCURACY LEVELS

30 35 40 45

15 cm

9 10 11 12 13 14

AUTONOMOUS30 - 45 cm

10 15 20 25

20 cm

EGNOS/OmniSTAR VBS

RangePointRTX

30 35 40 45

15 cm

9 10 11 12 13 14

AUTONOMOUS30 - 45 cm

10 15 20 25

20 cm

EGNOS

RangePointRTX

10 - 12 cm

8 9 10 11

4 cm

2 3 54

2.5 cm

0 1 2

RTK/RTK VRSOmniSTAR

GNSS/XP/HPCenterPoint

RTX

SOPHISTICATED GUIDANCE.INTUITIVE OPERATION.The ultra-wide screen XCN-2050™ display is compatiblewith the full range of correction signals and offers intuitive,colour multi-touchscreen operation. It has been designed toensure full integration with advanced PLM technologyincluding yield and moisture sensing, as well as a wholerange of other precision guidance applications.PLM Water Management compatible

ADVANCED MONITORS FOR ADVANCED FARMING

PLM MONITORS

FLEXIBLE OPERATION. EFFICIENT FARMING.The FM-1000 offers you ultimate performance and reliabilitywith the industry leading dual integrated GPS and GLONASSreceivers. It handles the full range of guidance tasks withease, including steering and also offers fingertip mappingcontrol. You can even choose the level of accuracy required,from 20cm right down to 2.5cm pass-to-pass and year-to-year.

FM-1000 DISPLAY

XCN-2050™ DISPLAY

The most sophisticated guidance systems require an intuitive monitor that provides instant control of all key parameters andreal-time feedback based on actual field conditions. Both the FM1000 and the XCN-2050™ monitor can be fitted to a range ofmachines, as and when required, which means operators benefit from only needing to learn how one screen works, thissignificantly enhances operational efficiency. The FM-1000 and the XCN-2050™ displays offer industry leading performanceand deliver productivity enhancing colour touchscreen functionality to enhance your agribusiness day in, day out.

• Large 30.7cm touch screenBest visibility from a bright and largescreen. Toggle between plan and 3D viewsor zoom in/out with just a tap of your finger.

10 11

• TrueTracker: correct the position ofyour implement to keep it on path.

• TrueGuide: correct the position of yourtractor to keep the implement on path.

• ISOBUS compatible

EZ-Remote™ controlThe EZ-Remote™ joystick mounts to anytractor console, providing an even moreconvenient way to control a variety ofguidance display functions from the cab.It enhances a wide range of tasks, frombasic guidance operations to moreadvanced operations and featuresprogrammable keys for rapidengagement of tasks. Furthermore,operator comfort is enhanced, as theycan rest their arm on the armrest withoutthe need to reach for the display.

• Planter and sprayer monitoring and control

• Wireless data transferTransfer your data from the fieldto the office with PLM® Software.

• Field Finder technologyAutomatically locate storedfields as you drive near them.

Yield and moisture Monitoring Collect crop yield and moisture data in realtime during harvesting via sensors connectedto the FM-1000 integrated display.

Video camerainputs

Seven guidance patternsOffers guidance flexibility, allowingyou to work in different patternsand shapes that best fit the layoutand contours of your field.

• USB stickSimply transfer your day’scoverage maps to yourcomputer using a USB stickand easily print out coveragereports and import/exportfield and coverage maps via the same USB.

• Field-IQ™ crop inputcontrol systems compatibleUse section control andvariable rate applicationcontrol technology to preventseed and fertiliser overlapand manage the rate of seed,liquid or granular application.

• Dual receiverTwo GPS plus GLONASS receivers provideultimate precision for the vehicle, as well asworking implements working behind the tractor.

• Radio (Optional)Integrated 430 to 470Mhz radiofor RTK correction reception.

• Boom height controlAutomatically adjust the height of your ISOBUScompatible sprayer boom via the display.

• Triggered outputJust imagine a machine that automaticallyswitched itself off when it was outside ofyour pre-defined boundaries. Well GPStriggered output technology does just that!When spraying or applying fertiliser forexample, if the system detects the machinehas breached a boundary, inputs will beswitched off to prevent costly wastage.

• Vehicle SyncUse Vehicle Sync to automate real time map sharing ofoverlap areas by combining the FM-1000 or XCN-2050™display, DCM-300 Modem and the Field-IQ™ system.

• Row Guidance system

• Fingertip assistanceYou are only ever a touch away from PLM assistance.Contact highly trained PLM specialists through theFM-1000 or XCN-2050™ display to solve all of yourPLM queries while you are still in the field.

• Access pathsAn access path is a space between yourguidance lines. This feature is particularlyuseful if a road or another field feature,which breaks the constant flow of swaths,passes through the middle of your field. The system can be programmed to takeaccount of these features to prevent wastedinputs or inappropriate activity in theseareas. You can add either straight or curvedpaths for maximum flexibility.

HEADLAND PIVOT A-B ADAPTIVE A+ IDENTICAL FREEFORM™PATTERN CURVE PATTERN CURVE

• EZ-Steer™ controllerUsing data from the GPSreceiver, the EZ-Steer controllersends precise instructions to thesteering wheel motor. T2™Terrain Compensation technologycontinually corrects for roll and yaw by using two-axis solidstate inertial sensors to give you a true on-ground position.

• EZ-Steer™ motorThe EZ-Steer motor receiveselectrical signals from the EZ-Steer controller and convertsthem into precise commandsthat the machine’s steeringsystem uses to keep the machineon track. You can resume controlof your machine at any time bysimply turning the steering wheel.An optional foot switch allowsyou to engage and disengagethe EZ-Steer conveniently forhands-free farming.

THE WORLD’S SIMPLEST HANDS-FREE FARMING SYSTEM EZ-Steer is a simple portable hands-free steering system forall vehicle models, old and new. The EZ-Steer system turnsthe steering wheel for you by combining a friction wheel anda drive motor, which is commanded indirectly by an outputfrom the guidance display. EZ-Steer keeps you on line inundulating terrain and when working on terraces, it alsohelps you avoid ditches and waterways so that you canfocus on the task in hand, be that spraying or planting. Putsimply, it improves performance, quality and crop yields allwhilst reducing stress.

COMPATIBLE DISPLAYSThe EZ-Steer system can be matched withEZ-Guide 250, EZ-Guide Plus, FM-750, FM-1000 or the new, XCN-2050™ display,with its ultra-wide 30.7cm screen deliveringup to +/-2.5cm GPS accuracy with RTK technology*.*RTK not compatible with EZ-Guide 250.

PLM ASSISTED GUIDANCE

THE NEXT STEP ALONG THE GUIDANCE ROADWhen it’s time to progress in the world of guidance, assisted guidance is the natural next step. Offering sleekintegration of steering motors, you can enjoy hands free operation so that you can concentrate fully on the taskin hand. You can even fit your guidance solution to whichever machine you’re currently using for the ultimatein guidance flexibility.

EZ-STEER™ SYSTEM

12 13

• EZ-Pilot™ controllerUsing data from the GPS receiver,the EZ-Pilot controller sends preciseinstructions to the steering wheelmotor. T3™ Terrain Compensationtechnology continually corrects forroll, pitch and yaw by using three-axis solid state inertial sensors togive you a true on-ground position.

THE NEW ‘INVISIBLE’ ASSISTED STEERING SYSTEMEZ-Pilot is a high-performance, low-cost, assisted steeringsolution that is sleekly integrated into the vehicle’s steeringcolumn, and it can be installed on most brands of tractorand harvesting machinery. This advanced solution alsofeatures T3™ Terrain Compensation Technology, whichkeeps you perfectly online in even the most undulatingconditions and when working on terraces.

• Advanced motors for guaranteed productivity The sleek motor design is fully integrated into the steering column and provides clear accessto the instrument cluster and other vehiclecontrols whilst maintaining telescopicfunctionality where present. The high-torqueelectric motor has been developed to overcomethe resistance of machines with more rigid powersteering systems for guaranteed performance. A fast-reacting electric motor allows the systemto quickly make steering adjustments to keep the vehicle online and make sure it stays there.

• Flexible installation options You have the choice of usingyour machine’s original steeringwheel or installing the optionalsteering wheel which providesan offset that returns the wheelback to the original height.

COMPATIBLE DISPLAYSThe EZ-Pilot™ system can be combinedwith the FM-750, FM-1000 or a newXCN-2050™ delivering up to +/-2.5 cmGPS accuracy with RTK technology.

EZ-PILOT™ SYSTEM

INTELLIGENT OPERATION FOR INTELLIGENT MACHINESINTELLIVIEW™ III AND IV TOUCHSCREEN MONITORS

ACCURACY LEVELS

ADVANCED INTELLIRATE™ CONTROL SYSTEMThe IntelliRate™ Control section is operated from thecomfort of the cab. Use the cab-mounted monitor to finetune inputs and manage section and rate control ofsprayers, to prevent overlaps, to control dosage ratesdepending on yield data and to eliminate gaps; this willoptimise inputs to maximise outputs.

The IntelliView™ III colour touchscreen monitor is your partner in all farming operations and is available on the T6 AutoCommand, T7, T8 and T9 tractor ranges, on the CX5000, CX6000 and CX Elevation combine series and on the BigBaler range.The CX Elevation and CR combines and FR forage harvester ranges are fitted with the new widescreen IntellIView™ IV colourtouchscreen monitor as standard, it is an upgrade option on the BigBaler range, and can be used as a second screen forprecision farming applications on T7, T8 and T9 tractor ranges. Both the IntelliView™ III and IntelliView™ IV displayscommunicate directly with the IntelliSteer® system together with the machine’s CAN Bus, and display key operating parametersin real time on just one screen. Maximum operator comfort is guaranteed thanks to the intuitive operating logic which enablesyou to see just where you are, and enables you to select the precise information you wish to browse, monitor and control.

PLUG AND PLAY ISOBUS COMPATIBILITYThe IntelliView™ III and IV colour touchscreen displays arenot simply machine noticeboards. Far from it! They are fullyISOBUS compatible, so can be used to operate a widerange of implements including balers and sprayers. Theresult? One monitor controls all applications. By using onescreen you can switch between tasks even quicker andimprove overall visibility.The ISO Task Controller further integrates implementfunctionality within the PLM package and can manage awhole range of implement parameters to provide precisioncontrol of implements to maximise productivity andefficiency.

GUIDANCE. MACHINE CONTROL. PERFECT.New Holland knows that operators need to keep an eye onboth key machine parameters as well as guidanceinformation. That is why they have developed the dualscreen solution. Customers can view IntelliSteer®

autoguidance run screens and coverage maps as well asvehicle controls simultaneously.

• Fingertip adjustment of all key settingsTogether with full compatibilitywith the New Holland IntelliSteer®

guidance system.

• 17.8cm IntelliView™ III displayFor fingertip touch screen monitor control.

• 26.4cm IntelliView™ IV displayWide touch screen offering an all new intuitive user experience.

30 35 40 45

10 - 12 cm

8 9 10 11

4 cm

2 3 54

15 cm

9 10 11 12 13 14

2.5 cm

0 1 2

RTK/RTK VRSAUTONOMOUS30 - 45 cm

OmniSTAR

10 15 20 25

20 cm

GNSS/XP/HPEGNOS

CenterPointRTX

RangePointRTX

PLM MONITORS

14 15

ULTIMATE COMFORTWith autoguidance you can concentrate on the task in hand,ensuring your header is 100% full, the crop flow is uniform orthat your implement is performing as it should. This offerssignificant gains in productivity. The T6 Auto Command, T7,T8 and T9 tractor ranges benefit from the SideWinder™ IIarmrest, which has set the benchmark in operationalcomfort, all controls fall perfectly to hand, and the 40° of seatswivel make working with rear mounted implements abreeze. The CX, CR and FR ranges benefit from industryleading harvesting consoles which enhance operationalergonomics for significant productivity increases.

USB flash driveSimply transfer your day’s coveragemaps to your computer using a USB stick and easily print outcoverage reports and import/exportfield and variable rate coveragemaps via the same USB.

Up to three camerasLinked to the IntelliView™ III and IV monitors, they are perfectfor monitoring implements andeliminating blind spots whilstmanoeuvring and unloading.

• Monitor and record fieldperformance operationsArea and distance, fuel usage,hectares per hour and engineoperating parameters, slip andwork rate can all be recordedand monitored.

• Guidance patternThe IntelliSteer® System, when linked to the IntelliView™ III and IVmonitors, can apply a number of different steering patterns.

STRAIGHT HEADING CURVE SPIRAL CIRCLE FIELD

IntelliView™ III and IV monitorThe IntelliView™ III and IV colourtouch screen monitors makeprogramming and personalisationof autoguidance settings as easyas 1-2-3. They also provide thevisual interface when operatingthe IntelliSteer® System.

Navigation Controller IIThe IntelliSteer® system benefits from the industry leading NavigationController II device with T3™ terraincompensation technology.

New Holland Integrated SteeringSensorThis built-in steering sensormeasures highly accurate wheelangle information on all terrain andsends it to the Navigation Controller IIproviding faster correction andincreased steering accuracy.

IntelliSteer is a fully integrated New Holland designed and developed Automatic Steering System. Available from thefactory or as a retrofit package, the IntelliSteer® system maximises productivity and efficiency to optimise your yields andto increase your profits. Matching DGPS or RTK Technology to fully integrated control, IntelliSteer helps ensure parallel pass-to-pass accuracy ofup to 2.5cm. IntelliSteer is the natural choice for precision work in even the most demanding conditions and it has beendesigned to dramatically enhance operator performance and comfort. Furthermore, this can be linked to Controlled TrafficFarming (CTF) applications.

FULLY INTEGRATED NEW HOLLAND AUTOGUIDANCEINTELLISTEER® SYSTEM

PLM INTEGRATED GUIDANCE

16 17

IntelliSteer On and Off simplicityThe CommandGrip™ handle*incorporates a single button that is used to activate the IntelliSteer®

system. Making advancedtechnology accessible is a key New Holland hallmark. *T6 Auto Command, T7, T8 and T9 tractors.

NH 372 ReceiverThe New Holland 372 antenna receives both DGPS andGLONASS signals to guide the vehicle. This antennacan easily be transferred from tractor to tractor or evento your combine or forager. For RTK applications a slimprofile radio mounts underneath the receiver.

• New Holland Vehicle InterfaceReceives navigation commandsfrom the Navigation Controller IIwhich control the vehicle’ssteering when engaged.

A COMPLETE GUIDANCE PACKAGE You can order your machine with either IntelliSteer as a factory installed option, orsimply with an IntelliSteer® ready package. This top of the range option is available onthe T6 Auto Command, T7, T8 and T9 tractor ranges, as well as on the CX Elevationand CR combine series. The system includes a NH 372 receiver, steering angle sensor,or a solid state gyro, the Navigation Controller II, a hydraulic control valve whichconverts the signals from the Navigation Controller II into hydraulic movements of thesteering system.

GOOD GUIDANCE SAVES MONEY*IntelliSteer helps improve overall operating efficiency. In poor lightor during long working days precision driving is not compromised.Improved efficiency saves money. It is as simple as that.*Based on 500 ha farm and 5m wide implement. Including tractor rental, fuel, labour, fertiliser/seed and chemical costs per ha.

EGNOS

Tota

l cos

t sav

ings

with

auto

gui

danc

e (D

)

D1796

D2685

D3350

HP/XP RTK

4000

3000

2000

1000

0

GO WITH THE CROP FOR ULTIMATE PRECISION

FULL HEADERS 100% OF THE TIME. PRECISION HARVESTING IN ALL CONDITIONS.The SmartSteer™ system uses a laser beam instead of the traditional optical 3D recognition found onconventional tracking systems, it is perfect for dusty conditions or when harvesting late into the night. Whencombined with the New Holland PLM® Software package, you get enhanced harvesting performance andimproved yield mapping.

HOW IT WORKSBy scanning the edge between the cut and uncut crop with a laser eye, theSmartSteer™ crop guidance system automatically guarantees the header is alwaysfull, right to the edge. How? It generates an exact line of uncut crop, this then sendssignals to the steering system to follow this precise path. The result? Operators canconcentrate on other combine functions to maintain maximum performance. The mostadvanced system is available on CX Elevation and CR combines, as the operator canset the laser scanner to detect the crop edge on either the left or right hand sidecourtesy of simple in-cab controls. On the CX5000 and CX6000 range, only the lefthand side of the header can be detected. As the SmartSteer™ system is fitted to thecombine itself, it is fully compatible with all types of header, offering you ultimateaccuracy with operational flexibility as standard.

AVAILABILITYCX5000, CX6000, CX Elevation and CR.

PLM CROP GUIDANCE

SMARTSTEER™ SYSTEM

18 19

AVAILABILITYCX5000, CX6000, CX Elevation, CR and FR.

MAIZE HEADERS SOLUTIONMaize headers can be specified with row guidance to keep the combine or forage harvester perfectly oncourse. Two sensors continuously monitor the position of the crop entering the header, and automatically guidethe machine to ensure true perpendicular entry even in poor visibility or at high speeds. The system can alsobe linked to a GPS positioning system, which can distinguish between cut and uncut rows, to facilitate night-time harvesting and advanced harvesting activities such as skip row functionality.

ROW GUIDANCE SYSTEM

MEETING YOUR PRECISION REQUIREMENTSThe Autopilot™ automated steering system, when used with an RTK signal, will give +/-2.5cm repeatabilityin all field tasks, from planting to harvesting and following any in-field pattern. The Autopilot™ system canbe integrated into most brands of tractor and harvesting machinery, and it uses the machine’s electrohydraulic circuit to provide automatic guidance. This retrofit solution will significantly increase yourefficiency during field preparation, planting and harvesting as you’ll be able to drive more accurately andconsistently during extended periods behind the wheel.

ALWAYS AVAILABLE. BEFORE OR AFTER.ON ALL MAKES AND MODELSAUTOPILOT™ SYSTEM

Navigation Controller IIThe Auto Pilot system benefitsfrom the industry leadingNavigation Controller II devicewith fully integrated T3™ terraincompensation technology.

Compatible DisplaysThe Autopilot™ System can bematched to FM-750, FM-1000 or theXCN-2050™ displays, delivering upto +/-2.5cm GPS accuracy with RTK technology.

PLM RETROFIT INTEGRATED GUIDANCE

20 21

Vehicle InterfaceReceives navigation commandsfrom the Navigation Controller IIwhich controls the vehicle’ssteering when engaged.

Compatible with EZ-Remote™ control

AntennaMounted to the tractor or implement to provide up to 2.5cm pass-to-pass and year-on-year accuracy.

Implement Guidance and RTK Increase your accuracy and yieldsCompatible with the FM-1000 display, and thanks to aDGPS antenna mounted on the implement, the TrueGuide™and TrueTracker™ systems keep your implement on arepeatable path on inclined fields with steep gradients and in variable soil conditions. Retrofit installation kits are compatible with most manufacturers’ implements.

Autosense™ Steering SensorThis unique steering sensormeasures highly accurate wheelangle information on all terrainand sends it to the NavigationController II providing fastercorrection and increasedsteering accuracy.

PLM IMPLEMENT GUIDANCE

KEEPING YOUR ENTIRE PRODUCTION ON COURSEGuidance is mainly focused on the machine itself, but when working with large implements, suchas the very widest planters and seed drills, the implement also needs to receive a guidancecorrection signal to ensure that it perfectly follows your tractor. After all, there is no point inkeeping the tractor on the straight and narrow while your drill slips slowly down the hill! New Holland has developed a range of solutions that can work in three dimensions for ultimatewhole vehicle accuracy.

IMPLEMENT GUIDANCE FOR TRUE IN-LINEAND ON COURSE OPERATIONS

22 23

TRUEGUIDE - IMPLEMENT CONTROL The TrueGuide™ implement guidance system uses the existing tractor Autopilot™system to improve implement accuracy. There is no need to hang additional steeringequipment off of the implement for better control or to minimize the downdraft effecton severe hillsides. Simply let your Autopilot™ system pull the implement up the hilland ensure it toes the line. In short, the tractor is steeredoff line, to keep yourimplement on line. This system is FM-1000 compatible.

TRUETRACKER - TAKE FULL CONTROL The TrueTracker™ system is an independent navigation system mounted on the implement that communicates withthe tractor’s Autopilot™ system to provide you the highest level of accuracy. The TrueTracker™ systemindependently steers the implement on a repeatable path, even on extreme slopes and in variable soil conditions,using a hydraulic solution together with T3™ terrain compensation technology which is mounted on the implement.TrueTracker is compatible with the FM-1000 display.

STEERING COULTERS TONGUE STEER LOAD BEARING WHEEL SIDESHIFT ARTICULATING THREE POINT

PLM CROP MANAGEMENT

FIELD-IQ™ CROP INPUT CONTROL SYSTEMS The Field-IQ crop input control system is a variable rate and section control system that runs on FM-750 or FM-1000 monitors. It prevents seed and fertiliser overlap, controls the rate of materialapplication and monitors seed delivery. Field-IQ™ automatic section control is able to control up to 48individual rows, eliminating waste and double application of inputs by automatically shutting off rowsor sections in areas which have already been covered, or do not require application.

INPUT CONTROL SYSTEMS:MANAGING INPUTS TO MAXIMISE OUTPUTS

Without seed monitoring With seed monitoring

24 25

AUTOMATIC SECTION CONTROLSection Control automatically shuts off rows orsections, eliminating double application ofseed and fertiliser. It uses the tractor’s GPSsystem to automatically turn on and offindividual planter sections in areas that havealready been covered, or at headland turns,point rows, waterways or terraces. Doubleplanting of rows is avoided, enhancing yieldsand eliminating waste.

VARIABLE RATE APPLICATION CONTROLVary application rates using prescription maps to better manage field variability. Variability in fields can be influenced byfactors such as soil properties, topography, cropping history and field use. GPS position is communicated to the ratecontroller as the application equipment moves across different zones in the field, enabling it to vary application rates byzone. Rather than just applying a constant seed rate you can apply higher seed populations in well irrigated or highlyfertile areas to maximize yield performance and use a lower application rate in less fertile areas or areas with poorirrigation. Also you can tailor chemical and fertiliser application in areas as required, lowering input cost and furtherenhancing yields.

MANURE MANAGEMENTSpreading waste-based nutrients can help you grow more, whilelowering fertiliser cost and protecting the environment. It isimportant that manure is always applied within an acceptable areaand not dispersed where regulations prohibit. Manure managementusing the FM-750 will record dispersal location and keep track ofthe nutrients that have been applied on your farm.

Liquid Spreading• Precisely monitor and control liquid spreading applications,

saving input costs and meeting environmental regulations.• Create prescription maps and vary the rate depending on manure

and soil properties.• Ensure that manure is applied in the correct areas and not where

regulations prohibit.• Track applied nutrients and record dispersal locations.

Dry Spreading• Utilize the FM-750™ display to help you accurately map and

apply dry manure when spreading.• Ensure that manure is applied in the correct areas and not where

regulations prohibit.• Track applied nutrients and record dispersal locations.

INTELLIRATE™ CONTROL IntelliRate™ Control is a variable rate and sectioncontrol system that allows you to control rate and flowapplications on mixed fleets of implements using anintegrated New Holland IntelliView™ IV display.

• Use automatic section control to switch on/off up to48 individual rows.

• Eliminate double application of seed and fertiliser.• Control material applications including liquid and NH3.• Read prescription maps to manage field variability

and maximize yield potential.• Monitor and record planter population rates.• Applied mapping for tracking varieties and hybrids.• Single display solution on New Holland equipment for

running key vehicle features, auto guidance andcontrolling mixed fleets of implements.

PLM ISO TASK CONTROLLER Control mixed fleets of ISOBUS compatible implementsusing your integrated New Holland IntelliView™ IVdisplay.

• Send commands to an ISOBUS compliant implementto modify its actions based on GPS positioning.

• Automatically switch on/off planter sections.• Prevent seed and fertiliser overlap.• Control application rates with prescription maps.• Map and log job dates.• Single display solution on New Holland equipment for

running key tractor functions, auto guidance andcontrolling mixed fleets of implements.

PLM CROP MANAGEMENT

INTEGRATED NEW HOLLAND SYSTEMS HELP INCREASE YIELDSPrecision farming has been engineered by design into the TC, CX5000, CX6000, CX Elevation, CR combines,the FR forage harvester series and the complete range of BigBalers to provide you with real-time informationto maximise both crop and equipment performance.•Permanently record your yield in precise locations and store it for future reference.•Constantly analyse real-time moisture information to ensure your crop is always harvested in peak condition.•Prepare application maps for accurate, site-specific fertilising, seeding and spraying in relation to actual

yields to increase your profits.

MANAGE YOUR HARVEST FOR GUARANTEED RETURNS YEAR AFTER YEAR

26 27

REAL TIME COMBINE MOISTURE SENSINGNew Holland’s moisture sensor measures grain moisture in real time. Samples are takenevery 30 seconds and the data is sent to the IntelliView™ monitor. As the information isdelivered in real time, the operator is kept continually informed and can adapt machineparameters accordingly. For the most accurate readings, sensor calibration is requiredfor each different crop type.

COMBINE YIELD MAPPINGThe exclusive patented, high accuracy yield sensor developed by New Holland isgenerally recognised as the best in class. Its design neutralises the rubbing effect of grain.Whatever the kind, the variety or the moisture content of the kernel, the senor generates anextremely accurate yield measurement. If that wasn’t enough, once you have initiallycalibrated your sensor at the beginning of the season, no further intervention is required.

ACTIVELOC™ TECHNOLOGY: MOISTURE ADAPTED CHOP LENGTHThe FR now features revolutionary ActiveLoc™ technology. Real time moisture sensing isused in combination with pre-set chop length parameters to control the length of thechop depending on moisture content. This increases clamp density as well as improvingsilage quality for an enhanced nutritional profile.

PRECISE ADDITIVE APPLICATIONAll forage harvesters and BigBalers are equipped with precise additive applicationsystems which interface with the on-board moisture sensors to deliver the preciseamount of crop additive to guarantee quality.

FORAGE HARVESTER YIELD MAPPINGPrecise yield data is also displayed on the IntelliView™ monitor, thanks to sensors thatare located in the feed roll linkage which analyses crop throughput; this is combined withthe machine’s forward speed to give accurate yield information. This data can be printedout on the on board job printer.

INTELLIFILL. LET YOUR FR FILL THE TRAILER FOR YOUOperating a forage harvester requires extensive experience and a high level ofconcentration. For maximum focus on crop flow and in-field progress, the ingenious 3Dcamera-based IntelliFill™ system automatically detects the trailer edge and monitorsfilling. Whatever the trailer size or shape, it automatically controls the spout movement toperfectly fill right to the trailer’s edges without spillages.

ON THE GO ACTIVEWEIGH™ SYSTEMBale weighing sensors are integrated into the bale discharge chute of the BigBaler andregister the weight of the bale at the point at which it becomes free from the chute, justbefore it drops to the ground. The ActiveWeigh™ system is independent of bale length,field conditions and baler movement. All information, including single bale weight, averageweight, total weight and tonnes per hour are all displayed on the IntelliView™ monitor.Furthermore, this all happens while you continue to pick-up for non-stop baling. If thatwasn’t enough, a 2% accuracy level means you’ll produce the bales precisely as required.

BALER MOISTURE SENSINGIt is imperative to record bale moisture, as an over-wet crop will spoil and be useless. The BigBaler moisture sensor uses two star wheels to penetrate the bale and an electriccurrent is passed through to determine the exact moisture of the bale. This is thendisplayed on the IntelliView™ monitor which prevents unready crop from being baled,and enables the precise application of additive.

THE CLEAR PATH FOR SUCCESSRow tracing technology uses guidance corrections signalsand a machine mounted antenna to ensure that each andevery row is covered just once. This consigns duplicatedrows and wasted inputs to the history books, increasingharvesting productivity and efficiency as well as reducingoperator fatigue during long working days as theyautomatically know just where to go.

PLM CROP MANAGEMENT

THE FINEST GRAPES MAKE THE FINEST WINESEnoControl™ grape harvesters read pre-prepared harvesting maps in real time to sort grapes of differing qualities into twodifferent hoppers to ensure that only the finest grapes make the finest wines. Part of the premium viticulture strategy, you canbe sure to increase your profits. Furthermore, these maps can be used to control inputs to bring uniformity to yields and tomanage costly inputs. FORCE-A’s award winning Multiplex® anthocyanin sensor enables you to access real time grape maturityinformation on Braud 9000 machines.

EFFICIENT PLM SOLUTIONS FOR SPECIALIST GRAPE AND OLIVE OPERATIONS

28 29

MANAGING VARIABLE RATE INPUTSThe spreader management package uses Field-IQ™technology to automatically vary the quantity of fertiliserbeing applied, depending on requirement. The system readspre-prepared yield maps, and only applies fertiliser where itis needed to reduce input cost while maximizing yields.

50%

25% -40% -10%

50%

ECOBRAUD REDUCES YOUR CARBON FOOTPRINTConsumers are increasingly demanding farmproduce with a reduced carbon footprint, and the ECOBraud strategy, that encompasses thecomplete range of New Holland viticultureequipment, including Braud grape harvesters andspeciality tractors does just that. When fuel savingsfrom IMS and fertiliser savings from spreadermanagement are combined, a reduction in thecarbon footprint of vineyards by up to 40% isachievable, well ahead of the 2020 targets, whichmandate a 20% overall reduction. This will directlycontribute to a 10% reduction in the overall carbonfootprint of each and every bottle of wine produced.

Car

bo

n e

mis

sio

ns

asso

ciat

ed w

ith

on

e b

ott

le o

f w

ine

Red

uce

d c

arb

on

em

issi

on

wit

h N

ew H

olla

nd

Vineyard

Cellar & Retail

New Hollandcontribution

New Hollandreduction

PLM CONNECT TELEMATICS

PLM® Connect enables you or your fleet manager to connect to your machines from thecomfort of your office through the utilization of the mobile network. You can stay in touchwith your machines at all times, and you can even send and receive real-time informationthat saves time and enhances productivity.

TELEMATICS: MANAGE YOUR MACHINEFROM THE COMFORT OF YOUR OFFICE

30 31

PLM® CONNECT ESSENTIAL:STANDARD TELEMATICS PACKAGE The entry-level PLM® Connect Essential package featuresfleet management and mapping functionality and can trackall machines on a single webpage as well as displaying theircurrent positions and actual activity. Moreover machinesecurity is enhanced as virtual geofences and curfews canbe set, which alert fleet managers when machines are usedoutside pre-defined working hours or areas to keepmachines safe from theft or unauthorized usage.

PLM® CONNECT PROFESSIONAL:STATE OF THE ART TELEMATICS FOR ADVANCED AGRIBUSINESSES The PLM® Connect Professional telematics packageoffers all of the features included in the Essentialpackage plus the ability to visualise different machinedisplays to monitor operating parameters and faultcodes. It is also possible to immediately send amessage to the operator by using the messagingsystem on the web portal, to which they can respondfor validation. Machine operating information can betransformed into performance analysis reports, byusing PLM® Software, that can be used to enhanceproductivity and efficiency and assists in swiftdecision making. Fuel usage is monitored to preventtheft and fleet managers can even activate messagealerting functionality. Furthermore, each machine canbe instantly tracked and location reports are sent inreal-time to monitor current usage profiles and assistcontractors in managing work flows.

Advanced PLM operations are demanding increasinglysophisticated monitoring and management techniques, andNew Holland has introduced an upgraded PLM softwarepackage to meet those requirements. PLM Software isaccessed via the PLM® portal.

PLM® SOFTWARE

A COMPLETE SOFTWARE PACKAGEFOR 360° FARM PROFITABILITY

PLM SOFTWARE

PLM® VIEWERA zero-cost package, that enables the reading and writing of datasuch as client, farm and field names together with job dataincluding yield and coverage maps to popular precision farmingdevices.

PLM® MAPPINGThis is the main package for record keeping of fields, mapping andanalysis. You can layer a variety of topographical and yield maps toestablish yield performance, and compare these with averagemultiple year maps to identify areas that deliver consistently high orlow yields. Variable rate prescription maps using formulas based onsoil types can also be created, together with yield or other maps.Guidance paths can be created or edited, and reports can beprinted for seeds varieties, restricted use chemicals, fertiliserusage, equipment maintenance and more.

32 33

PLM® BOOKSAccess the profitability of field, livestock herds andequipment and print tax reports for both cash and accrualledgers. If you want to keep up to date with the inventory forsupplies, seeds, chemicals, fertiliser, feed, harvested cropsand livestock, then you’ve just found out how!

PLM® WATER CONTROL Water is precious and it is the lifeblood of your farm. WithPLM® Water Control you could increase yields by up 25% andcut your farm’s water consumption by up to 30%. The fieldlevelling technology facilitates land levelling and leveedesign for unsurpassed efficiency. The drainage solutionpackages integrate survey data, analysis, design, installationand mapping to provide the most efficient drainage package.Further package functionality includes identifying optimalplacement of tile and surface drains in both surface and sub-surface drainage projects. You can view field topographicaldata in 3D from any angle and exaggerate the vertical tovisualise the shape and slopes of the field. Why not utilise thedrawing tools to tie laterals to mains, create parallel lateralspacing and clip drainage lines. How about finalising thelayout and design of drainage tiles’ by size, pipe type andphase and then enter minimum depth, maximum depth andoptimum grade for each.

PLM® MOBILE Software that is suitable for the new generation,mobile, handheld field computer devices thatincludes record keeping, mapping field boundariesand drainage lines, scouting, soil sampling andvariable rate application functionality.

WWW.NEWHOLLANDPLM.COM

PLM SUPPORT

New Holland knows that when you require support and assistance you don’t want to wait, that’s why we’ve developed athree pronged approach to PLM® support. The online PLM® Portal is an open-all hours, one stop shop for all of your PLMquestions. If you would like to speak to a highly trained operator, then call the dedicated PLM® Top Service number.However, if you would rather deal with someone face to face, PLM ‘flying doctors’ are on hand to come to your farm, andsolve your problem, in your field, with you.

PLM® PORTALVia the PLM® Portal you can receive an upgraded service,with both on-line and telephone support, together withclassroom training in your own language. You can browsethe latest PLM news, search for additional productinformation and user guides as well as accessing the ‘MyAccount’ area which contains all of your ownpersonalised information. You can even find out how toget even more from your PLM solution with on-line trainingvideos and tutorials.

PLM® SOFTWARE SUPPORT A significantly enhanced software support service,managed in conjunction with SGS, a multi-national companyspecializing in agricultural services is now available. Youcan enroll in a whole host of courses which will enable youto unlock every last ounce of potential from your precisionfarming packages.

ALWAYS WITH YOU IN YOUR FIELD

34 35

OPTION 3

TOP SERVICE00800 64 111 111

PLM® TOP SERVICE CALL CENTRE A dedicated PLM hot-line is available around the clock with highly trainedoperators waiting to take your call and resolve any potential issues andanswer any questions you may have.

PLM® CERTIFIED DEALERS In order to deliver top quality service andsupport, New Holland has developed the PLM®

Certified Dealer programme. Wherever you seethis logo, you’re sure to find experts to supportyour PLM investments.

PLM® ON FARM SUPPORT The most demanding customers can select a‘flying doctor’ service; a PLM specialist will visityour farm, to resolve any software issues.

PLM® ACADEMY If you would like to find out more about PLM products, then whynot enroll in the PLM® Academy. A wide range of courses areavailable to help you further enhance your knowledge, and toenable you to squeeze every last ounce of potential out of youron-farm PLM solution. If that wasn’t enough, you can accessquick-reference tutorials or the video training library to ensureyou keep up to date with the latest PLM developments atwww.plmacademy.newholland.com.

PLM® COST SAVING CALCULATOR If you would like to find out just how much you could save by using advanced PLM®

technology, then download the PLM® cost saving calculator app. Available on alltablets and smart phones, you simply select the task you wish to carry out, such ascultivation or harvesting, enter key parameters including fuel and input costs andthe area to be worked, and the app will tell you just how much you could save if youwere to use PLM® guidance and/or PLM® input control solutions.

PLM® ACADEMY APP The new PLM® Academy App gives you remote access to valuabletutorials and videos through your smartphone or tablet.• Remotely access tutorials, even while in your machine• Easy access for machine operators• On the job learning while in the cab or field• Videos and tutorials can be watched in `off-line' mode• Continuously updated content.

The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer. The drawings and photos may refer to equipmentthat is either optional or intended for other countries. Please apply to our Sales Network for any further information. Autopilot™, Autosense™, EZ-Guide®, EZ-Pilot™, EZ-Remote™, EZ-Steer™, Field-IQ™, OnPath®, T2™, T3™, TrueTracker™ and TrueGuide™ are trademarks of Trimble Navigation Limited registered in the United States Patent and Trademark Office and other countries. Publishedby New Holland Brand Communications. Bts Adv. - Printed in Italy - 09/14 - TP01 - (Turin) - 138009/INB

NEW HOLLAND TOP SERVICE:PLM® CUSTOMER SUPPORT AND PLM CUSTOMER INFORMATION

AT YOUR OWN DEALER

Experience New Holland What’s App!Scan here to download the Apps

www.newholland.com/uk - www.newholland.com/ie

TOP AVAILABILITYIf you need information,or have an out of hoursquestion, ring our toll-freenumber*.All day, every day,we are just a call away.

TOP SPEEDExpress parts delivery:when you need it,where you need it!

TOP PRIORITYFast-track solution during the season: because your harvest can’t wait!

TOP SATISFACTIONWe drive and track the solutionyou need, keeping you informed:until you are 100% satisfied!

New

Ho

llan

dp

refe

rslu

bri

can

ts

For more details, ask your New Holland dealer!

* Calls to the Top Service team are free from landlines in the United Kingdom and Republic of Ireland. UK-based mobile calls are also free, but Republic of Ireland mobile users should call 01 2421881

and this will be charged at your standard network rate.