fanuc robot
DESCRIPTION
application of robticsTRANSCRIPT
FANUC Robot R-2000iB seriesKachare Nikita VishnuMhatre Gaurav Ranjan
Vyas Amit Mukesh
Department of Electronics Engineering, Mumbai University,M .H. Saboo Siddik College of Engineering
Mumbai, Maharashtra 400 012 India
[email protected]@[email protected]
Abstract- This paper is a case sudy of FANUC R-2000iB/165f which is a successful robot of series FANUC R-2000iB and the successor of famous FANUC r-2000iA. In this paper we have presented the robots basic description, features, applications, specifications and benefits of using this robot.
I. Introduction
FANUC is a group of companies, principally FANUC Corporation of Japan, Fanuc America Corporation of Rochester Hills, Michigan, USA, and FANUC Robotics Europe SA of Luxembourg, that provide automation products and services such as robotics and computer numerical control systems. FANUC is one of the largest makers of industrial robots in the world. FANUC had its beginnings as part of Fujitsu developing early numerical control (NC) and servo systems.
The company name is an acronym for Factory Automation NUmerical Control.
All the series of robot by FANUC are ARC Mate, F-200iB, LR Mate Series, M-1iA, M-2iA, M-3iA, M-10iA, M-20iA, M-410iC, M-420iA, M-430iA, M-710iC, M-900iA, M-900iB, M-2000iA, Paint Mate, Paint Robots, R-1000iA, R-2000iB, R-2000iC.
II. FANUC Robot R-2000iB series
The FANUC R-2000+B robot is an intelligent robot for versatile applications. This highly reliable robot with intelligence and network collaboration provides the best cost performance and ease of use for applications with integrated versatile process solutions such as spot welding, material handling and assembly.
A. Simple and compact mechanical unit
The R-2000+B provides a slim and compact body with a simplified, vertical articulated arm, while maintaining the largest motion area and the heaviest payload in its class.- Compact wrist unit- Minimum interference at rear side- Dense installation of multi-robot
B. Intelligence and networking
The newly developed robot controller provides enhanced CPU performance. This includes the latest software function and the most up-to-date intelligence and networking features.-Higher motion performance-Integrated vision-Bin picking function-Diagnostics function
III. Basic Description
The R-2000iB series is FANUC Robotics latest-generation, six-axis, heavy-payload, high-performance family of industrial robots. The R-2000iB provides higher value through industry-leading performance, reliability and maintainability.
IV. R-2000iB Series, the Solution for Automotive spot welding and general assembly General industrial applications Material handling Part transfer Material removal Disensing Machine loading
V. Benefits
Slim arm and wrist assemblies minimize interference with system peripherals and allow operation in confined spaces.
Large allowable wrist moments and inertias meet a variety of heavy handling challenges.
Many process attachment points make integration easier.
Non-rotating forearm simplifies hose and cable dressout to prolong service life.
Proven, reliable FANUC servo drives provide highest uptime and productivity.
Longer maintenance intervals equate to lower operating costs.
Fewer mechanical components reduce down time, increase mean time between failure (MTBF) and minimize spare part requirements.
High-performance motion yields fast cycle times and high throughput.
Wrist flange and base mounting are identical to the R-2000iA, allowing for seamless backward compatibility.
R-2000iB can reach all areas of R-2000iA work envelope for easy replacement.
VI. Features
A. Mechanical
Large work envelope with ability to reach overhead and behind.
6 axes of motion. Slim profile design. RV reducers on all axes. Lack of counterweight increases available
workspace. Process/application cables routed through the
arm. No motors at wrist. Standard J1 adjustable hard stop. IP67 rated wrist/forearm.
B. Control
35% average faster TPP and KAREL® execution speed over previous generation.
Up to 24 axes on main servo card plus 16 axes on mini-slot card for 40 axes maximum.
Quick change amplifier <5 minutes. Fast boot time <30 seconds. Two Ethernet ports standard. USB interface on panel and PCMCIA slot
internal. Easy connections to a variety of I/O, including a
number of distributed I/O networks. iPendant™, a color, Internet-ready teach pendant
for even easier programming and custom cell user interface design.
Built-in support for machine vision applications for error proofing and robot guidance, without the need for a PC.
VII. Options
Process specific software packages for various applications.
Web-based software tools for remote connectivity, diagnostics and production monitoring.
FANUC’s iRVision® (Integrated Robot Vision) system delivers high performance 2-D and 3-D machine vision capabilities with FANUC reliability. Additional option for Error Proofing can provide integrated vision based capabilities to check for product completeness before product is packaged or further operations are performed.
FoundryPRO® protection package and two-part epoxy paint for foundry and harsh environments.
Standard baseplate for quick robot installation. Auxiliary axes packages for integration of
peripheral servo-controlled devices and robot track units.
Adjustable hard stops for J1, J2 and J3. Various robot connection cable lengths for
flexible cabinet placement and optional track rated cables.
iPendant with touch screen for custom HMI applications.
Monochrome teach pendant. Integrated spot welding utilities. Electrically insulated faceplate.
I. R-2000iB/165f specifications
II. REFERENCES
[1] FANUC Robot R-2000+B series manual
Online References:-
[1] FANUC ROBOTS
Model R-2000iB/165F
Controlled Axes 6
Controllers R-30iB
MaxLoad Capacity At Wrist [kg]
165
Repeatability [mm] 0.2
Mechanical Weight [kg] 1170
Reach [mm] 2655
Motion Range [°] J1 360
J2 136
J3 362
J4 720
J5 250
J6 720
Maximum Speed [°/s] J1 110
J2 110
J3 110
J4 150
J5 150
J6 220
Moment [Nm/kgm²] J4 921/78.4
J5 921/78.4
J6 461/40.2
IP Rating
Wrist & J3 arm IP67, body IP54. Option: movable parts IP66, main body IP56
http://www.fanucrobotics.se/en