faculty development programme development... · shri shyamal gupta director, srmsibs, lucknow...
TRANSCRIPT
DEVELOPMENT DEVELOPMENT P R O G R A M M EP R O G R A M M E
ACULTY
Organized by : Department of Mechanical Engineering
Shri Ram Murti Smarak College of Engineering & Technology, Unnao
Sponsored byDr. A.P.J. Abdul Kalam Technical University,
Lucknow, Uttar Pradesh(UNDER TEQIP - III)
Advancements in Manufacturing Technologies : Mechatronics,
Automation and Robotics
Advancements in Manufacturing Technologies : Mechatronics,
Automation and Roboticsth th26 to 30 June, 2018
FACULTY DEVELOPMENT
PROGRAMME
ABOUT US
SRMS Trust has established Shri Ram Murti Smarak College of
Engineering & Technology, Unnao in the year 2011 with state of the art
infrastructure at 35 Km. on Lucknow-Kanpur Highway, Village-
Kushahari, Unnao (UP). It is established to facilitate and expends the
quality based engineering education for which SRMS is known since
1996. Department of Mechanical Engineering of this college was
started since the inception of the college i.e in the years 2011. It has a
vision to create and develop skilled and competent mechanical
engineers with interdisciplinary skills and innovative capabilities. The
department is equipped with modern infrastructure for the
laboratories and workshop and well qualified and experienced
faculty members.
This Faculty Development Program is sponsored by AKTU under
TEQIP III and aimed to enhance the quality of classroom delivery of
academic programs being run and foster a better ecosystem for
research and innovation in the institutions. It is intended to enhance
the effectiveness of teaching and research in the manufacturing
technologies. It is well known that the technologies are continuing to
push the boundaries of conventional manufacturing. The traditional
production layouts are slowly being replaced by “smart” and
“automated” processes. This FDP will provide a suitable exposure to
the participants on latest advancements on manufacturing with
specific reference to Mechatronics, Automation and Robotics. It will
equip the facultymembers with required skills and knowledge to
improve the teaching learning process in the related subjects of
interest.
The faculty members of the engineering colleges affiliated to Dr A P J
Abdul Kalam Technical University, Lucknow, can participate in this
FDP. Although this FDP is specially designed for the faculty members
of engineering disciplines from Mechanical, Production, Industrial,
Manufacturing technologies etc. the faculty members of other
department who wish to enhance their knowledge in interdisplinary
areas of manufacturing can also participate.
OBJECTIVES AND LEARNING OUTCOMES OF FDP
WHO CAN PARTICIPATE ?Program Co-ordinator
Mr. Saurabh Kr. Singh
Er. Subhash Mehra
Prof. (Dr.) Prabhakar Gutpa
Prof. (Dr.) A. K. Srivastava
Head - Department of Mechanical Engineering SRMSCET, Unnao
Trust Administrator, SRMS Trust
Dean Academics, SRMSCET, Bareilly
Principal, SRMSCET, Unnao
Mob.: [email protected]
Shri Dev Murti
Shri Aditya Murti
Chairman, SRMS Trust
Secretary, SRMS Trust
Shri Shyamal GuptaDirector, SRMSIBS, Lucknow
Motivator & Guide
Prof. (Dr.) Vinay Kumar Pathak Hon’ble V.C., Dr. APJAKTU, Lucknow
Organizing Committee
Advisors
Chief Patron
Patrons
Mr. Awanish Kumar Mishra
Mob. : 9458702693Email: [email protected]
List of Eminent Speakers
Organizing Secretary
Prof(Dr.) S.P. TEWARIIIT BHU
Prof(Dr.) SANTOSH KUMARIIT BHU
Prof(Dr.) D. K. SINGH
MMMTU GORAKHPUR
Dr. NILANJAN MALLIKIIT BHU
Advancements in Manufacturing Technologies : Mechatronics,
Automation and Roboticsth th
26 to 30 June, 2018
Assistant Professor Department of Mechanical Engineering
SRMSCET, Unnao
PEDAGOGY AND SCOPE
PARTICIPATION
The sessions of this Faculty Development Program shall be conducted by the team of
eminent academicians & industry experts possessing in-depth knowledge in the area of
Advance Manufacturing Technology. It will consist of a series of lectures, interactions and
hands-on practical sessions. Some identified subthemes on which the talk would be
delivered by eminent resource persons are.
a. Advance manufacturing methods
b. Advanced unconventional machining methods
c. Advanced welding technology
d. Flexible manufacturing system
e. Industrial automation
f. Introduction to robotics (Mobile robotics, Micro and Nano robotics)
g. Introduction to mechatronics
h. Pneumatic and hydraulic system
i. CNC machines and its programming
j. SCADA & Fuzzy logic.
There is no Registration Fee. The interested participants are required to fill the Registration
Form available at our website www.srms.ac.in and send it by E-Mail (Scanned copy after due
signatures)at E-mail: [email protected] at the earliest but not later than 24th June,
2018.
The college will provide accommodation to the participants of this program on sharing
basis. The allotment of the accommodation will be based on first come basis and depends on
the availability. The participants who need accommodation during program are required to
make request for that in the registration form.
This is a Five Days programme scheduled from 26th to 30th June, 2018 from 9:00am to
5:00pm. The participants are required to attend all sessions to get participation certificate.
Shri Ram Murti Smarak College of Engineering & Technology
Seminar HallDepartment of Mechanical Engineering
Venue
35 Km on NH-25, Lucknow -Kanpur Highway, Unnao - 209859 (U.P.) IndiaPhone : 91-5143-278401 - 16; Fax, 91-5143-278404
e-mail: [email protected], website : http://www.srms.ac.in/cetlucknow
FACULTY DEVELOPMENT
PROGRAMME
Advancements in Manufacturing Technologies : Mechatronics,
Automation and Roboticsth th
26 to 30 June, 2018
SRMS SCHOOL OF NURSING R.R. CANCER INSTITUTE & RESEARCH CENTRE
SRMS Diagnostics (Functional Imaging and Medical Centre)
CP 2/3, Vishwash Khand (near Flyover) Gomti Nagar, Lucknow
+91-522-2308987, 2308988
Unnao
REGISTRATION FORM
FACULTY DEVELOPMENT PROGRAM
Sponsored by TEQIP III & Dr. A. P. J. Abdul Kalam Technical University, Lucknowon
and
Advancements in Manufacturing Technologies : Mechatronics, Automation and Robotics”
( )th th26 to 30 June, 2018
Organised by Department of Mechanical Engineering, SRMSCET, Unnao
1. Name ___________________________________________________________________________
2. Designation ______________________________________________________________________
3. Name & Address of Institute/Organization _____________________________________________
_________________________________________________________________________________
4. Address for Communication _________________________________________________________
_________________________________________________________________________________
E-Mail ___________________________________________________________________________
Phone / Mobile No. ________________________________________________________________
5. Accommodation Required Yes No
(Signature of the applicant)
Shri Ram Murti Smarak College of Engineering & Technology
Seminar HallDepartment of Mechanical Engineering
Venue
35 Km on NH-25, Lucknow -Kanpur Highway, Unnao - 209859 (U.P.) IndiaPhone : 91-5143-278401 - 16; Fax, 91-5143-278404
e-mail: [email protected], website : http://www.srms.ac.in/cetlucknow
Place _____________
Date _____________
(In Block Letters)