faber kabel brochure construction industry web

CO N STRU CTI O N I N D U STR Y

CONSTRUCTION INDUSTRY F R O M P R O F E S S I O N A L S

F O R P R O F E S S I O N A L S .

E R T S

Individually customized lengths to your wishes are matter

of course. Additional services such as coordinated crane

provision or several lengths on the same reel are no problem

either. Get in touch, we will gladly support you in the realiza-

tion of your projects.

Your contact:

Phone +49 681 9711-0

Fax +49 9711-289

[email protected]

F A B E R

T H E S E R V I C E P R O F E S S I O N A L S .

T R U S T W O R T H Y

O U R

R E F E R E N C E S .

Many companies around the world place

their trust in us. We always have the right

solution at hand for every one of our cli-

ents, because we want them to be suc-

cessful. Which is also why they keep faith

with us.

More information about our references can be found at

http://www.faberkabel.de/en/branchen/referenzen.html

W E W I L L B E G L A D T O H E A R

F R O M Y O U .

E X POur product portfolio with up to 17.000 items makes our

cable and wire range one of the largest in Europe. The

foundation of our corporate concept: immediate product

availability, extraordinary product variety, and thus risk

minimization for our clients. What this means for you:

no capital lockup, no risk of theft, and no valuation risk.

And we will support you in avoiding idle periods and in

successfully coping with the time and cost pressure at

the site

Plenty of good reasons for you, then, to not only build

with us, but also on us.

F A B E R

T H E C A B L E P R O F E S S I O N A L S .

minimization for our clients. What this means for you:

no capital lockup, no risk of theft, and no valuation risk.

And we will support you in avoiding idle periods and in

successfully coping with the time and cost pressure at

the site

Plenty of good reasons for you, then, to not only build

with us, but also on us.

Given their complexity, construction products call

for thought-through and detailed site logistics.

Their successful and profi table realization is only

possible with strong and capable partners by your

side. Because every change in the workfl ow or sup-

ply bottleneck can massively complicate the site

logistics, and improvisation is expensive.

We know this from many years of successfully

supplying the building trade with our cables and

wires – from family businesses through to con-

struction groups. We know all about the special

requirements in practical application, and have

proven our professionality in a great number of

construction and infrastructure projects already.

Apart from fl exibility and total security of supply,

we can o� er you reliable, practical and pragmatic

solutions, and will deliver our products to every

building site – irrespective of the construction pro-

gress or restricted delivery times – anywhere in

the world.

F A B E R

P R O D U C T S F O R P R O F E S S I O N A L B U I L D E R S .

MO RE INFO RMATIO N ABOUT THE EURO PEAN CO NSTRUCTIO N

PRO DUCTS REGULATIO N (CPR) CAN BE FOUND AT www.faberkabel.de/en /

CROSS SECTIONS: 50 up to 1,000 mm²

APPLICATION: For installation in ground, in water, outdoors, indoors and in cable ducts for power stations, industry, and distribution net-works. The high mechanical durability of the PE-sheath permits high resistance to mechanical stress during installation or operation. The water blocking tape avoids water propagation inside the cable.

CROSS SECTIONS: 2 up to 500 pairs, Ø 0.6 and 0.8 mm

APPLICATION: For fi xed installation in buildings, in free air, in ground, in water and in concrete.

CROSS SECTIONS: 35 up to 1,000 mm2

APPLICATION: For installation in ground, in water, outdoors, indoors and in cable ducts for power stations, industry, and distribution net-works. The high mechanical durability of the PE-sheath permits high resistance to mechanical stress during installation or operation. The water blocking tape avoids water propagation inside the cable.

CROSS SECTIONS: 35 up to 630 mm²

APPLICATION: Single-core cables are used in short lengths, e.g. for connection of switchgear cubicles and for connection of mobile trans-former substations. When laying and during operation care should be taken to protect them against excessive mechanical stress. The outer semiconducting layer must not be heated before removing.

CROSS SECTIONS: 2 up to 500 pairs, Ø 0.6 and 0.8 mm



APPLICATION: Flexible medium voltage reeling cable for high and extreme mechanical stres ses, e.g. torsional stress, defl ection into dif-ferent planes and high reeling speed. Also usable for underground and opencast mining.

Medium voltage cable NA2XS(F)2Y Subscriber line cable A-2YF(L)2Y St III Bd

Medium voltage cable N2XS(F)2Y Trailing cable (N)TMCGCWOEU

Subscriber line cable A-2Y(L)2Y St III Bd Trailing cable (N)TSCGEWOEU MT PLUS



CROSS SECTIONS: 1.5 up to 630 mm²





APPLICATION: For use at medium mechanical stress in dry, wet and damp locations, as well as in free air. Also for fi xed installation on plaster or machines. The cable is resistant to oil, UV radiation and ozone.


APPLICATION: Designed to withstand high mechanical stresses. For the connection of heavy-duty underground mining, industrial and construc-tion equipment, in dry and damp areas and outdoors. The cable is largely fl ame-resistant and oil-proof.


APPLICATION: In dry and wet environment as well as in free air for me-dium mechanical stress. For connection of electrical tools on building sites or in cold environments.

Power cable NAYY-J/-O

Power cable NYY-J/-O

Power cable NYCY / NYCWY

Rubber insulated cable H07RN-F

PUR insulated cable H07BQ-F

Rubber insulated cable NSSHÖU

You are unique.

We will print what you wish on the

cables and wires from our range. Tell

thieves “Hands o� !”. Or personalize

your cables with your company name

or website. This way you will not only

convey your advertising message, but

also reduce the risk of mix-ups and

cable loss.

The options.

The printing service is available for cables and wires from

a cross-section of 3 x 1.5 mm² and from a minimum order

quantity of as little as 5 meters. You can freely select the

font size, but this should harmonize with the cable dia-

meter.

W E M A K E Y O U D I S T I N C T I V E !

O U R C A B L E P R I N T I N G S E R V I C E .

Good to know.

• We generally print in black and white.

• We charge 0.08 euros per meter for

the printing, with a minimum charge

of 40 euros.

• The delivery period after print approval

is one week.

Be it for cranes, concrete mixers or construc-

tion machinery – you can have cables with a

wire cross-section of 16 to 240 mm² (and up to

300 mm² with single-core cables) preassembled by

us in small batches, using high-quality cable lugs,

ferrules, couplings and plugs from renowned ma-

nufacturers.

The type of preassembly is meanwhile individually

tailored to the customer’s wishes. A fi nal inspecti-

on of the preassembled cables (including tests as

per Employers‘ Liability Association Regulations

BGV A3) guarantees consistent quality.

O U R

P R E A S S E M B L E D C A B L E S .

W E H A V E T H E B E S T

C O N N E C T I O N S !

Klaus Faber AG

Headquarters

Lebacher Straße 152 – 156

66113 Saarbrücken

Germany

Phone +49 681 9711-0

Fax +49 681 9711-289

[email protected]

Klaus Faber AG

Export and logistics centre

Hedemünden

Kirchweg 12 – 14

34346 Hann. Münden

Germany

Klaus Faber AG

Export and logistics centre

Fichtenau

Gärtnerstraße 1

74579 Fichtenau

Germany

Get to know more: www.faberkabel.de/en/

faber kabel brochure construction industry web

Documents