external – c-clip metric · dg t d s max df g dc to order different material/finishes, append...

HUYETT.COM • 785-392-3017

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

142For detailed specifications and tolerances, visi t Huyett.com.

Description How to IdentifyIdeal for low clearance applications where radial installation is preferred.

Item#

Shaft Diameter

(mm)

Groove Size Ring Size & Weight Item#

Clearance Supplementary Data Use with ApplicatorDiameter Width Depth Thickness2 Free Diameter Max.

SectionWeight Free

Outside Diameter

Installed in Groove

Edge Margin Thrust Load Ring

Thrust Load Groove

Allowable Radii &

Chamfers

Max. Loadw/R Max.

or Ch Max.

RPM Limits

Ds Dg Tol. W Min.

d Ref.

T Tol. Df Tol. S Max.

kg/ 1,000

G Ref.

L2 Max.

Y Min.

Pr kN

PgkN

R/Ch Max.

P'r kN

DC-003 3 2.3

-0.07

0.44 0.35 0.40 -0.05 2.18 ±0.06 0.90 0.02 DC-003 3.98 4.1 1.0 0.50 0.24 0.40 0.40 95,000 RRA-545

DC-004 4 3.2 0.44 0.40 0.40 -0.05 3.00 ±0.06 1.00 0.04 DC-004 5.00 5.2 1.2 0.50 0.37 0.40 0.40 90,000 RRA-080

DC-005 5 4.0 0.64 0.50 0.60 -0.05 3.80 ±0.08 1.20 0.08 DC-005 6.20 6.4 1.5 1.10 0.58 0.60 0.70 88,000 RRA-547

DC-006 6 5.0 0.74 0.50 0.70 -0.05 4.80 ±0.08 1.30 0.11 DC-006 7.40 7.6 1.5 1.65 0.72 0.70 1.10 80,000 RRA-320

DC-007 7 6.0

-0.09

0.85 0.50 0.80 -0.05 5.80 ±0.08 1.40 0.13 DC-007 8.60 8.8 1.5 2.20 0.85 0.80 1.30 69,000 RRA-120

DC-008 8 7.0 0.85 0.50 0.80 -0.05 6.80 ±0.09 1.60 0.17 DC-008 10.00 10.2 1.5 2.20 0.98 0.80 1.30 67,000 RRA-570

DC-009 9 8.0 1.10 0.50 1.00 -0.06 7.80 ±0.09 1.70 0.22 DC-009 11.20 11.4 1.5 3.50 1.10 1.00 2.00 58,000 RRA-571

DC-010 10 9.0 1.10 0.50 1.00 -0.06 8.75 ±0.09 1.70 0.26 DC-010 12.15 12.4 1.5 3.70 1.24 1.00 2.00 50,000 RRA-572

DC-011 11 10.0

-0.11

1.10 0.50 1.00 -0.06 9.65 ±0.18 1.80 0.29 DC-011 13.20 13.6 1.5 4.00 1.35 1.00 2.00 40,000 RRA-573

DC-012 12 10.9 1.10 0.55 1.00 -0.06 10.55 ±0.18 1.90 0.32 DC-012 14.35 14.7 1.7 4.20 1.65 1.00 2.00 35,000 RRA-290

DC-013 13 11.8 1.10 0.60 1.00 -0.06 11.40 ±0.18 2.00 0.36 DC-013 15.40 15.8 1.8 4.50 1.90 1.00 2.00 30,000 RRA-190

DC-014 14 12.7 1.10 0.65 1.00 -0.06 12.30 ±0.18 2.00 0.40 DC-014 16.30 16.7 2.0 5.00 2.20 1.00 2.00 27,000 RRA-390

DC-015 15 13.6 1.10 0.70 1.00 -0.06 13.20 ±0.18 2.10 0.46 DC-015 17.40 17.8 2.1 5.50 2.60 1.00 2.00 25,000 RRA-577

DC-016 16 14.5 1.10 0.75 1.00 -0.06 14.10 ±0.18 2.20 0.54 DC-016 18.50 18.9 2.3 5.80 3.00 1.00 2.00 24,000 RRA-400

DC-017 17 15.4 1.10 0.80 1.00 -0.06 14.90 ±0.18 2.25 0.64 DC-017 19.40 19.9 2.4 6.00 3.40 1.00 2.00 23,000 RRA-579

DC-018 18 16.3 1.30 0.85 1.20 -0.06 15.80 ±0.18 2.30 0.72 DC-018 20.40 20.9 2.6 8.50 3.70 1.20 2.80 21,000 RRA-200

DC-019 19 17.2 1.30 0.90 1.20 -0.06 16.70 ±0.18 2.40 0.80 DC-019 21.50 22.0 2.7 9.00 4.30 1.20 2.80 21,000 RRA-280

DC-020 20 18.1

-0.21

1.30 0.95 1.20 -0.06 17.55 ±0.18 2.55 0.87 DC-020 22.65 23.2 2.9 9.40 4.70 1.20 3.00 20,000 RRA-582

DC-022 22 19.9 1.30 1.05 1.20 -0.06 19.40 ±0.21 2.80 1.10 DC-022 25.00 25.5 3.2 10.00 5.70 1.20 3.00 17,000 RRA-583

DC-023 23 20.8 1.30 1.10 1.20 -0.06 20.20 ±0.21 2.90 1.15 DC-023 26.00 26.6 3.3 10.50 6.20 1.20 3.20 15,000 RRA-584

EXTERNAL – C-CLIP METRIC

W

DsDg

Td

S Max

DfG

DC

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -SS

Dg

L2

1. Verify C-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.

Clearance Diameter Installed in GrooveRing Dimensions Groove Dimensions

W

DsDg

Td

S Max

DfG

Additional attribute data on adjacent page.


[email protected]

143For detailed specifications and tolerances, visi t Huyett.com.

Suffix Material/Finish

All dimensions in millimeters.

For hardness specifications, see page 145.2 For plated rings add 0.05 mm to the listed maximum thickness. Maximum ring thickness will be a

minimum of 0.005 mm less than the listed groove width (W) minimum.

Item#

Shaft Diameter

(mm)



SectionWeight Free

Outside Diameter

Installed in Groove


Thrust Load Groove

Allowable Radii &

Chamfers

Max. Loadw/R Max.

or Ch Max.

RPM Limits

Ds Dg Tol. W Min.

d Ref.


kg/ 1,000

G Ref.

L2 Max.

Y Min.

Pr kN

PgkN

R/Ch Max.

P'r kN

DC-003 3 2.3

-0.07

0.44 0.35 0.40 -0.05 2.18 ±0.06 0.90 0.02 DC-003 3.98 4.1 1.0 0.50 0.24 0.40 0.40 95,000 RRA-545

DC-004 4 3.2 0.44 0.40 0.40 -0.05 3.00 ±0.06 1.00 0.04 DC-004 5.00 5.2 1.2 0.50 0.37 0.40 0.40 90,000 RRA-080

DC-005 5 4.0 0.64 0.50 0.60 -0.05 3.80 ±0.08 1.20 0.08 DC-005 6.20 6.4 1.5 1.10 0.58 0.60 0.70 88,000 RRA-547

DC-006 6 5.0 0.74 0.50 0.70 -0.05 4.80 ±0.08 1.30 0.11 DC-006 7.40 7.6 1.5 1.65 0.72 0.70 1.10 80,000 RRA-320

DC-007 7 6.0

-0.09

0.85 0.50 0.80 -0.05 5.80 ±0.08 1.40 0.13 DC-007 8.60 8.8 1.5 2.20 0.85 0.80 1.30 69,000 RRA-120

DC-008 8 7.0 0.85 0.50 0.80 -0.05 6.80 ±0.09 1.60 0.17 DC-008 10.00 10.2 1.5 2.20 0.98 0.80 1.30 67,000 RRA-570

DC-009 9 8.0 1.10 0.50 1.00 -0.06 7.80 ±0.09 1.70 0.22 DC-009 11.20 11.4 1.5 3.50 1.10 1.00 2.00 58,000 RRA-571

DC-010 10 9.0 1.10 0.50 1.00 -0.06 8.75 ±0.09 1.70 0.26 DC-010 12.15 12.4 1.5 3.70 1.24 1.00 2.00 50,000 RRA-572

DC-011 11 10.0

-0.11

1.10 0.50 1.00 -0.06 9.65 ±0.18 1.80 0.29 DC-011 13.20 13.6 1.5 4.00 1.35 1.00 2.00 40,000 RRA-573

DC-012 12 10.9 1.10 0.55 1.00 -0.06 10.55 ±0.18 1.90 0.32 DC-012 14.35 14.7 1.7 4.20 1.65 1.00 2.00 35,000 RRA-290

DC-013 13 11.8 1.10 0.60 1.00 -0.06 11.40 ±0.18 2.00 0.36 DC-013 15.40 15.8 1.8 4.50 1.90 1.00 2.00 30,000 RRA-190

DC-014 14 12.7 1.10 0.65 1.00 -0.06 12.30 ±0.18 2.00 0.40 DC-014 16.30 16.7 2.0 5.00 2.20 1.00 2.00 27,000 RRA-390

DC-015 15 13.6 1.10 0.70 1.00 -0.06 13.20 ±0.18 2.10 0.46 DC-015 17.40 17.8 2.1 5.50 2.60 1.00 2.00 25,000 RRA-577

DC-016 16 14.5 1.10 0.75 1.00 -0.06 14.10 ±0.18 2.20 0.54 DC-016 18.50 18.9 2.3 5.80 3.00 1.00 2.00 24,000 RRA-400

DC-017 17 15.4 1.10 0.80 1.00 -0.06 14.90 ±0.18 2.25 0.64 DC-017 19.40 19.9 2.4 6.00 3.40 1.00 2.00 23,000 RRA-579

DC-018 18 16.3 1.30 0.85 1.20 -0.06 15.80 ±0.18 2.30 0.72 DC-018 20.40 20.9 2.6 8.50 3.70 1.20 2.80 21,000 RRA-200

DC-019 19 17.2 1.30 0.90 1.20 -0.06 16.70 ±0.18 2.40 0.80 DC-019 21.50 22.0 2.7 9.00 4.30 1.20 2.80 21,000 RRA-280

DC-020 20 18.1

-0.21

1.30 0.95 1.20 -0.06 17.55 ±0.18 2.55 0.87 DC-020 22.65 23.2 2.9 9.40 4.70 1.20 3.00 20,000 RRA-582

DC-022 22 19.9 1.30 1.05 1.20 -0.06 19.40 ±0.21 2.80 1.10 DC-022 25.00 25.5 3.2 10.00 5.70 1.20 3.00 17,000 RRA-583

DC-023 23 20.8 1.30 1.10 1.20 -0.06 20.20 ±0.21 2.90 1.15 DC-023 26.00 26.6 3.3 10.50 6.20 1.20 3.20 15,000 RRA-584


DC

### = CARBONSPRINGSTEEL,PHOSPHATE###-SS = STAINLESSSTEEL,PLAINMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Y

*The radius “Br” on the load side must not exceed 0.1T

R Max

Ch Max

Br*

Maximum Corner Radius (R Max) & Chamfer (Ch Max)

for Retained Part

*The radius “Br” on the load side must not exceed 0.1T

Edge Margin (Y)

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

STACKEDOPTIONSAVAILABLE,SEEHUYETT.COMFORMOREDETAILS


HUYETT.COM • 785-392-3017


144

How to Identify

For detailed specifications and tolerances, visi t Huyett.com.

Item#

Shaft Diameter

(mm)



SectionWeight Free

Outside Diameter

Installed in Groove


Thrust Load Groove

Allowable Radii &

Chamfers

Max. Loadw/R Max.

or Ch Max.

RPM Limits

Ds Dg Tol. W Min.

d Ref.


kg/ 1,000

G Ref.

L2 Max.

Y Min.

Pr kN

PgkN

R/Ch Max.

P'r kN

DC-024 24 21.7

-0.21

1.30 1.15 1.20 -0.06 21.10 ±0.21 3.00 1.52 DC-024 27.10 27.7 3.5 11.00 6.80 1.20 3.20 15,000 RRA-585

DC-025 25 22.6 1.30 1.20 1.20 -0.06 22.00 ±0.21 3.15 1.74 DC-025 28.30 28.9 3.6 11.50 7.50 1.20 3.20 15,000 RRA-586

DC-026 26 23.5 1.30 1.25 1.20 -0.06 22.90 ±0.21 3.25 1.88 DC-026 29.40 30.0 3.8 12.00 8.00 1.20 3.20 15,000 RRA-586

DC-028 28 25.2 1.60 1.40 1.50 -0.06 24.60 ±0.21 3.50 2.32 DC-028 31.60 32.2 4.2 16.50 9.70 1.50 5.50 13,000 RRA-588

DC-030 30 27.0 1.60 1.50 1.50 -0.06 26.30 ±0.21 3.70 2.43 DC-030 33.70 34.4 4.5 17.00 11.00 1.50 5.60 13,000 RRA-589

DC-032 32 28.8 1.60 1.60 1.50 -0.06 28.10 ±0.21 4.00 3.02 DC-032 36.10 36.8 4.6 18.00 12.50 1.50 5.80 13,000 RRA-590

DC-035 35 31.5

-0.25

1.60 1.75 1.50 -0.06 30.80 ±0.25 4.30 3.30 DC-035 39.40 40.1 5.3 20.00 15.00 1.50 5.80 11,000 RRA-591

DC-036 36 32.4 1.85 1.80 1.75 -0.06 31.70 ±0.25 4.40 4.40 DC-036 40.50 41.2 5.4 25.00 16.00 1.75 8.30 10,000 RRA-592

DC-038 38 34.2 1.85 1.90 1.75 -0.06 33.40 ±0.25 4.60 4.62 DC-038 42.60 43.4 5.7 26.00 17.50 1.75 8.50 10,000 RRA-593

DC-040 40 36.0 1.85 2.00 1.75 -0.06 35.20 ±0.39 4.90 5.05 DC-040 45.00 45.8 6.0 27.50 20.00 1.75 8.80 9,000 RRA-594

DC-042 42 37.8 1.85 2.10 1.75 -0.06 37.00 ±0.39 5.10 5.46 DC-042 47.20 48.0 6.3 28.00 21.50 1.75 8.90 9,000 RRA-595

DC-045 45 40.5 1.85 2.25 1.75 -0.06 39.60 ±0.39 5.50 5.98 DC-045 50.60 51.5 6.8 30.00 25.00 1.75 9.00 8,000 RRA-596

DC-048 48 43.2 1.85 2.40 1.75 -0.06 42.30 ±0.39 5.90 7.82 DC-048 54.10 55.0 7.2 32.00 28.00 1.75 9.00 8,000 RRA-597

DC-050 50 45.0 2.15 2.50 2.00 -0.07 44.00 ±0.39 6.20 8.85 DC-050 56.40 57.4 7.5 39.50 31.00 2.00 12.00 7,000 RRA-598

DC-052 52 47.0 2.15 2.50 2.00 -0.07 46.00 ±0.39 6.30 9.33 DC-052 58.60 59.6 7.5 41.00 32.00 2.00 12.00 7,000 RRA-599

DC-055 55 50.0 2.15 2.50 2.00 -0.07 48.50 ±0.39 6.50 10.40 DC-055 61.50 63.0 7.5 43.00 34.00 2.00 12.00 7,000 RRA-600


W

DsDg

Td

S Max

DfG

DC

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -SS

1. Verify C-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.

W

DsDg

Td

S Max

DfG

Applications

Purchase rings in a stacked roll pack.

Mount on a rail dispenser.

Remove ring from rail using an applicator.



[email protected]

145

Suffix Material/Finish

For detailed specifications and tolerances, visi t Huyett.com.

All dimensions in millimeters.2 For plated rings add 0.05 mm to the listed maximum thickness. Maximum ring thickness will be a minimum of 0.005 mm less than

the listed groove width (W) minimum.

Item#

Shaft Diameter

(mm)



SectionWeight Free

Outside Diameter

Installed in Groove


Thrust Load Groove

Allowable Radii &

Chamfers

Max. Loadw/R Max.

or Ch Max.

RPM Limits

Ds Dg Tol. W Min.

d Ref.


kg/ 1,000

G Ref.

L2 Max.

Y Min.

Pr kN

PgkN

R/Ch Max.

P'r kN

DC-024 24 21.7

-0.21

1.30 1.15 1.20 -0.06 21.10 ±0.21 3.00 1.52 DC-024 27.10 27.7 3.5 11.00 6.80 1.20 3.20 15,000 RRA-585

DC-025 25 22.6 1.30 1.20 1.20 -0.06 22.00 ±0.21 3.15 1.74 DC-025 28.30 28.9 3.6 11.50 7.50 1.20 3.20 15,000 RRA-586

DC-026 26 23.5 1.30 1.25 1.20 -0.06 22.90 ±0.21 3.25 1.88 DC-026 29.40 30.0 3.8 12.00 8.00 1.20 3.20 15,000 RRA-586

DC-028 28 25.2 1.60 1.40 1.50 -0.06 24.60 ±0.21 3.50 2.32 DC-028 31.60 32.2 4.2 16.50 9.70 1.50 5.50 13,000 RRA-588

DC-030 30 27.0 1.60 1.50 1.50 -0.06 26.30 ±0.21 3.70 2.43 DC-030 33.70 34.4 4.5 17.00 11.00 1.50 5.60 13,000 RRA-589

DC-032 32 28.8 1.60 1.60 1.50 -0.06 28.10 ±0.21 4.00 3.02 DC-032 36.10 36.8 4.6 18.00 12.50 1.50 5.80 13,000 RRA-590

DC-035 35 31.5

-0.25

1.60 1.75 1.50 -0.06 30.80 ±0.25 4.30 3.30 DC-035 39.40 40.1 5.3 20.00 15.00 1.50 5.80 11,000 RRA-591

DC-036 36 32.4 1.85 1.80 1.75 -0.06 31.70 ±0.25 4.40 4.40 DC-036 40.50 41.2 5.4 25.00 16.00 1.75 8.30 10,000 RRA-592

DC-038 38 34.2 1.85 1.90 1.75 -0.06 33.40 ±0.25 4.60 4.62 DC-038 42.60 43.4 5.7 26.00 17.50 1.75 8.50 10,000 RRA-593

DC-040 40 36.0 1.85 2.00 1.75 -0.06 35.20 ±0.39 4.90 5.05 DC-040 45.00 45.8 6.0 27.50 20.00 1.75 8.80 9,000 RRA-594

DC-042 42 37.8 1.85 2.10 1.75 -0.06 37.00 ±0.39 5.10 5.46 DC-042 47.20 48.0 6.3 28.00 21.50 1.75 8.90 9,000 RRA-595

DC-045 45 40.5 1.85 2.25 1.75 -0.06 39.60 ±0.39 5.50 5.98 DC-045 50.60 51.5 6.8 30.00 25.00 1.75 9.00 8,000 RRA-596

DC-048 48 43.2 1.85 2.40 1.75 -0.06 42.30 ±0.39 5.90 7.82 DC-048 54.10 55.0 7.2 32.00 28.00 1.75 9.00 8,000 RRA-597

DC-050 50 45.0 2.15 2.50 2.00 -0.07 44.00 ±0.39 6.20 8.85 DC-050 56.40 57.4 7.5 39.50 31.00 2.00 12.00 7,000 RRA-598

DC-052 52 47.0 2.15 2.50 2.00 -0.07 46.00 ±0.39 6.30 9.33 DC-052 58.60 59.6 7.5 41.00 32.00 2.00 12.00 7,000 RRA-599

DC-055 55 50.0 2.15 2.50 2.00 -0.07 48.50 ±0.39 6.50 10.40 DC-055 61.50 63.0 7.5 43.00 34.00 2.00 12.00 7,000 RRA-600

HardnessRanges:DC-clips

Material Size RangeHardness

HV HRC Lower Scale♦ 15N 30N

(blank)Carbon Steel,(SAE 1060-1090)

3 & 45 – 1718 – 55

485 – 545485 – 545485 – 545

48 – 5248 – 5248 – 52

84.5 – 86.5 HR15N♦♦

66.5 – 70.5 HR30N –

– –

-SSStainless Steel,(PH 15-7 Mo)

3 & 45 – 1718 – 55

435 – 530435 – 530435 – 530

44 – 5144 – 5144 – 51

82.5 – 86 HR15N♦♦

63 – 69.5 HR30N –

– –

-SSStainless Steel,(DIN 1.4122 X39CrMo17)

All 470 – 580 47 – 54 – 84 – 87.5 66 – 72

♦ Where Applicable♦♦ Hardness cannot be checked with any degree of accuracy directly on these rings.


DC

### = CARBONSPRINGSTEEL,PHOSPHATE###-SS = STAINLESSSTEEL,PLAINMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Installationtoolsavailable,

seepage257

STACKEDOPTIONSAVAILABLE,SEEHUYETT.COMFORMOREDETAILS


external – c-clip metric · dg t d s max df g dc to order different material/finishes, append...

Documents