exterior folding door systems · the eclipse e2™ system is designed for folding doors in exterior...

ECLIPSE E2I INTERIOR FOLDING DOOR HARDWARE SYSTEM

ECLIPSE E2™ SYSTEM FOR EXTERIOR OUTSWING APPLICATIONS ONLY

Eclipse E2 Outswing System Catalogue & E2i Interior Door Hardware System • Revision (10) March 26, 2018

PRINTED CATALOGUE MAY NOT BE UP TO DATE, ALWAYS REFER TO PRODUCT WEBSITE FOR MOST UP TO DATE CONTENT.

Exterior Folding Door Systems

Beautiful doors for beautiful spaces

© Copyright 2018 • Eclipse Architectural®2 ALL DRAWINGS NO SCALE

E2 HARDWARE, TRACK, SILL SYSTEM & WEATHERSEALING FOR EXTERIOR FOLDING DOORS & WINDOWS

maximum panel weight: 130 lbs (60 kg)maximum panel width: 43” (1100mm)maximum panel height: 118” (3000mm)

In a single direction

Parts Selection

TOP TRACK WITH FLUSHBOLT PIN CHANNEL SILL SYSTEM FLOOR CHANNEL

FLUSHBOLTS OR TWINPOINT

maximum number of panels: 8 each waypanel thickness: 1-3/4” (44.45 mm) using E2 Sill Systempanel thickness: 1-3/8” (34.93 mm) or 2-1/4” (57.15 mm) using floor channel.

Eclipse E2™ is specified with 5 separate groups: track, sill, weathersealing, flushbolts and hardware. Components are required from all 5 groups to build an Eclipse folding door system.

KT49C clear anodizedKT49D bronze anodizedLengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)

Top Track, extruded aluminum (optional)

KT41C clear anodized.KT41D bronze anodized. Lengths available: 111”, 147”, 183”, 222” (2.81m, 3.73m, 4.64m, 5.63m)

4 lengths available:

DBOT Style 1” (25.4mm) throw length regardless of bolt length. Finishes available: brushed aluminum or bronze powder coat.

KT23DV floor channel, bronze anodized with PVC insert, black.Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)

KT23BLVE Replacement PVC insert (only)

KT795 8” wide (203mm) for 1-3/4” (44.5mm) door.KT797 8” wide (203mm) for 2-1/4” (57mm) door. KT775 6-9/16” wide (167mm) for 1-3/4” (44.5mm) door. KT777 6-9/16” wide (167mm) for 2-1/4” (57mm) door. Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m). Order flushbolt cups and sill assembly end gaskets separately.

KT749 Flushbolt cup, satin or bronze, used with flushbolt

KT750GASKET included with KT749, fits under rim of cup

HARDWARE2 stock finishes available: Stainless steel & pvd bronze

7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

KT768GASKET sill to jamb assembly gasket

Fir top water return sill, extruded aluminum clear or bronze anodized.

KT795COVERBLVEPVC insert, black. Snap in cover for flushbolt channels for the new Eclipse sill & top track. Fits into sills above.

PVD brass (TG) finish is custom order, call for manufacturing time.

FOR OUTSWING & INSWING DOORS

The Eclipse E2™ System is designed for folding doors in exterior residential or light commercial applications. It has been developed to allow the opening to be effectively weathersealed for exposed environments. It enables up to 8 doors in both directions to be folded to the side of an opening and is suitable for Housing, Apartments, Cafes, Restaurants, Hotels & Shop Fronts. A typical installation of an Eclipse E2™ System would be glazed doors opening out onto a balcony or patio. It can be used in place of aluminum, wood or PVC sliding doors.

Weather: This system is suitable for use in exterior building applications.Application: The Eclipse E2™ System uses pivots attached to the head and sill, which allow adjustment horizontally and vertically of the entire system. The pivots provide compensation for out-of-square jambs with up to 3/8” (10mm) of adjustment. All screws are fully concealed for external security.Materials: The Eclipse E2™ System uses architectural grade aluminum alloy for tracking and stainless steel for hinge pins, carrier pins and carrier bogeys. Hinges are available in PVD brass, Brushed Stainless steel, and PVD Bronze, finishes over stainless steel.

2-15/32” (63mm)

1-3/8” (35mm)

1-1/2” (38mm)

1-1/2” (38mm) ECLTBC

Flushbolt cup used with floor channel and ADA sill, also used with Twinpoint

WEATHERSEALS & ASTRAGALDS434 Weatherseal for sill, jamb and header. Black, brown or white

KT190 Fir astragal, may be stained or painted

DSP108-35BL Pile weatherseal for door with astragal, 5/16” (8mm) pile height, black

DS7145-270BL Pile weatherseal for KT70 & KT75 top track, black

DS434 Kerf seal

DS416 Weatherseal for between doors. Black, brown or white

DS369A7145BL Aluminum T-slot extrusion with black pile insert, for bottom of doors

DS415BL Black DS415W White weatherseal for between doors, use on clad doors where kerf slot is not possible

© Copyright 2018 • E clipse Architectural® 3

INDEXKT190C84B 2, 14

KT190C84BL 2, 14

KT190C84W 2, 14

KT190 C96B 2, 14

KT190C96BL 2, 14

KT190C96W 2, 14

KT190C108B 2, 14

KT190C108BL 2, 14

KT190C108W 2, 14

KT190C120B 2, 14

KT190C120BL 2, 14

KT190C120W 2, 14

KT23BLVE 2, 12

KT23D 2, 12

KT23D-RADIUS 2, 12

DS369A7145BL 2, 8, 9, 12

DS416B 2, 4, 10

DS416BL 2, 4, 10

DS416W 2, 4, 10

DS434B 2, 4, 8 - 11

DS434B81 2, 4, 8 - 11

DS434B96 2, 4, 8 - 11

DS434BL 2, 4, 8 - 11

DS434BL81 2, 4, 8 - 11

DS434BL96 2, 4, 8 - 11

DS434W 2, 4, 8 - 11

DS434W81 2, 4, 8 - 11

DS434W96 2, 4, 8 - 11

DS415B96 2

DS415B144 2

DS415W96 2

DS415W144 2

DS415BL144 2

KT41C 2, 35

KT41C-RADIUS 13

KT41D 2, 35

KT41D-RADIUS 13

KT49C 2, 11

KT49D 2, 11

KT749BRONZE 2, 16, 17

KT749DCH 2, 16, 17

KT760SPC 8, 9

KT770SPC 8, 9

KT780SPC 8, 9

KT788E3D 12

KT841REDUCER 8, 9

KTDBSY SERIES 17

KTDBOT200NRG 16

KTDBOT200NRQ 16

KTDBOT200NRX 16

KTDBOT400NRG 16

KTDBOT400NRQ 16

KTDBOT400NRX 16

KTDBOT600NRG 16

KTDBOT600NRQ 16

KTDBOT600NRX 16KTDBOT1000NRG 16KTDBOT1000NRQ 16KTDBOT1000NRX 16

KTE2CICSTG 26, 27

KTE2CICSOL 26, 27

KTE2CICSS 26, 27

KTE2CLCSTG 26, 27

KTE2CLCSOL 26, 27

KTE2CLCSS 26, 27

KTE2CPSTG 26, 27

KTE2CPSOL 26, 27

KTE2CPSS 26, 27

KTE2CRCSTG 26, 27

KTE2CRCSOL 26, 27

KTE2CRCSS 26, 27

KTE2EHTG 26, 27

KTE2EHOL 26, 27

KTE2EHS 26, 27

KTE2HTG 26, 27

KTE2HOL 26, 27

KTE2HS 26, 27

KTE2HHTG 26, 27

KTE2HHOL 26, 27

KTE2HHS 26, 27

KTE2HHNHTG 26, 27

KTE2HHNHOL 26, 27

KTE2HHNHS 26, 27

KTE2HNHTG 26, 27

KTE2HNHOL 26, 27

KTE2HNHS 26, 27

KTE2HHNHSTG 26, 27

KTE2HHNHSOL 26, 27

KTE2HHNHSS 26, 27

KTE2HHTG 26, 27

KTE2HHSOL 26, 27

KTE2HHSS 26, 27

KTE2HNHSTG 26, 27

KTE2HNHSOL 26, 27

KTE2HNHSS 26, 27

KTE2HSTG 26, 27

KTE2HSOL 26, 27

KTE2HSS 26, 27

KTE2WPSTG 26, 27

KTE2WPSOL 26, 27

KTE2WPSS 26, 27

DSP108-35BL 2, 4, 14

DS7145-270BL 2, 11

LEVER LOCK SETS 28, 29

MULTIPOINT MK2 28

MISC / SPARE & REPLACEMENT PARTSKT750GASKET 2

KT768GASKET 2, 14

KTDBPCS 16, 17

KTDBSPQ 16, 17

KTDBSPS 16, 17

KTE2DBFORB 16, 17

KTE3HGASKET 4

KTEMAG 24

KT740DHC 25

KT740DHD 25

KT745ESPX 6, 7

KT745ESPQ 6, 7

KTDCAS 25

KTDCAOL 25

TWINPOINTECLT2TRSN0924 18 - 23

ECLT2TRSN0930 18 - 23

ECLT2NS 18 - 23

ECDF3SHN 18 - 23

ECDF4SHNS 18 - 23

ECLTBC8SS 18 - 23

ECTLBC8SOL 18 - 23

ECLT2RB 18 - 23

ECLTSP8SS 18 - 23

ECLTSP8OL 18 - 23

KTE2I INTERIOR FOLDING DOOR HARDWARE

KTE2I 30 - 35

LegendX Satin aluminumG Bright gold anodizedTG PVD brassOL PVD bronze Q Powder coat bronzeS Stainless steelC Clear anodizedD Bronze anodizedB BrownBVE Black vinyl extrusionBL BlackDHC Satin / clearDHD Bronze anodizedDHBL Black powder coatDHW White powder coatNK Black pileNG Grey pile

PVD brass (TG) finish is custom order, call for manufacturing time.

SwingIS InswingOS Outswing

MiscSPC Sill protective coverGASKET A/B gasketFORB Router bitFIR Fir top mouldDJ Drill jig for hinges

Lengths For Flushbolts7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

HardwareICS Intermediate carrier 3 piece setLCS Left carrier 2 piece setRCS Right corner 2 piece setPS Pivot top & bottom 2 piece setEH “D” pull handle 1 pieceH Hinge flat with handle 1 pieceHH Hinge offset with handle 1 pieceHNH Hinge flat no handle 1 pieceHHNH Hinge offset no handle 1 pieceHS Hinge flat with handle 3 piece set HHS Hinge offset with handle 3 piece setHNHS Hinge flat no handle 3 piece setHHNHS Hinge offset no handle 3 piece setWP Wall pivot

Misc / Spare Hardware ComponentsPCS End cap for OC flushbolts pinSP Striker plateCBP Bottom pivot housingPCP Pivot capSCREW Screws for hinge flapsWPCUP Wall pivot jamb cup onlySPOC Striker plate OC flushboltTPPLATE Top pivot mounting plateDH Door hold

FlushboltsKTDBOT For outswing applicationKTDBSY For ADA sill application


NO SCALE

9/32” (7mm) jamb clearance

9/32” (7mm) jamb clearance

5/32” (4mm) panel to panel gap



INTERIOR

INTERIOR

EXTERIOR

EXTERIOR

top pivot right hand carrier

bottom guide

hinge set facing inside

wall pivot

hinge set facing inside

basic door basic door leading door

intermediate carrier set

bottom pivot

jamb door or pivot door

9/32

” (7

mm

) Jam

b c

lear

ance

9/32” (7mm)Jamb clearance

E2 ARCHITECTURAL DETAIL

KTE3HGASKETAdhesive black gasket for optimum sealing performance around all hinge flaps.Gasket compatible with E2 & E3 hinges.

DS416 & DSP108-35BL Weatherseal Detail for 1-3/4” (44.5mm) Door

flushbolt machiningcentered at stile width

RO.5 (R1/64)

pivot doorweathersealapplication

11/16”(17.5mm)

11/16”(17.5mm)

1/8”(3.2mm)

3/8”(9.5mm)

1/8” (2.5mm) 9/16” (14mm)

5/32” (4mm)

DSP10835BL

DS416

3/8”(9.5mm)

1/8”(3.5mm)

6-9/16”(166.7mm)

5/16”(7.4mm)

9/32”(7mm)

3/4” (18.5mm)

5/16” (7.4mm)5/16” (7.4mm)

5/16”(7.4mm)

1/8” (2.8mm)

1-3/4”(44.5mm)

1-7/16” (36mm)9/16” (14mm)

4-3/8”(110.6mm)

39/64”(15.4mm)

1-5/8”(41mm)

CL

CL

CLREF

REF

latching door to jamb, weatherseal & strike plate application for 3L, 3R, 5L, 5R, 7L or 7R.

KT745extended strike plate for 1-3/4” (44.45mm) door thickness only. Used with standard style lock set.

DS434

4-5/16”(107mm)

Outswing Application

4L (4 doors folding left) Exterior View (all doors are same width)

© Copyright 2018 • E clipse Architectural® 5ALL DRAWINGS NO SCALE

E2 ARCHITECTURAL DETAIL

1-3/4”(44.5mm)

RO

KT426gasket

KT426gasket

KT427gasket

rod & caulk (air barrier)

KT426gasket

9/32” (7mm)

5/32”(4mm)

Tested in accordance with A440 and AAMA101 Testing by:

Equivalent A440 rating (A440-98)Water tightness - B4 with raised sill Air tightness - A3 minWind load resistance/structural - C2 minExceeds min. rating of AAMA/NWWDA 101/I.S. 2

Intertek Testing Services

In a single directionMaximum panel weight: 130 lbs (60 kg)Maximum panel width: 43” (1100mm)Maximum panel height: 118” (3000mm)Door thickness: 1-3/4” (44.45 mm) using Sill System. Maximum # of doors: 8 each way

Top of door to top of hinge 2-1/2” (63.5mm)same at bottom

Seal details same for upper and lower hinges (internal only, not required for external hinges)

cut inside seal flush to underside of inside hinge KT416

flush

Hinge Set Placement

INSIDE FACE OUTSIDE FACE

For full E2 test results, please visit www.eclipsearchitectural.com

5-1/2” (139.7mm)

1-5/16” (33.5mm)

Centre of top track to centre of bottom channel 23/32” (18.5mm)

EXTERIOR

RO

INTERIOR

KT795 sill

KT49 top track


1x KTE2CPSpivot set1x KTE2CRCSright carrier set1x KTE2HShinge set2x KTDB non-keyed flushbolt

2x KTE2CPS pivot set1x KTE2CRCS right carrier set1x KTE2HS hinge set2x KTDB non-keyed flushbolt

1x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE22HHS half offset hinge set2x KTDB non-keyed flushbolt


1x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set2x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt

2x KTE2CPSpivot set1x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set2x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt

2x KTE2CPS pivot set1x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set1x KTE2HS hinge set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt

1x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2HS hinge set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt


2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set3x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt



1x KTE2CPS pivot set3x KTE2CICS intermediate carrier set2x KTE2HS hinge set1x KTE22HHS half offset hinge set6xKTDB non-keyed flushbolt

1x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CRCS right carrier set1x KTE2HS hinge set2x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt

Thisconfigurationnotaccessiblefromexterior



RCS

HS

PS

FB

PS PS

HS

RCSFB

PS

HHS

ICS

DH

ESPFB

PS PS

HHS

ICS

DH

FBFB

maybereversed

PS

HHS HHS

ICS RCS

FB FB

PS PS

HHS HHS

ICS

RCSFB FB

PS PS

HHS HS

ICS

LCS

DH

FB FB

PS

HSHHS

ICS ICS

DH

ESPFB FB

PS PS

HHS

ICS ICS

HHSDH DH

FB FB FB

ICS ICS ICSPS

HS HSHHS DH

ESPFB FB FB

PS PS

HHS HHS

ICS

HHS

ICS

RCS

DH

FB FB FB

PSPS

HS HSHHS

ICS ICS

LCS

DHFB FB FB

PSPS

HSHHS

ICS

HHS

ICSICS

DH DH

FB FB FBFB

maybereversed

RCSICS ICSPS

HHS HS HHS

FB FB FB

1x KTE2CLCSleft carrier setPer pair of doors:

1x KTE2CRCSright carrier set1x KTE2HShinge set2x KTDBnon-keyed flushbolt

FB

DH

PASSAGESETLOCKBYOTHER

FLUSHBOLTSTOP&BOTTOM

TWINPOINTOPTIONTOFB

FLOATINGDOORPAIRS

ASTRAGAL

DOORHOLD

LEGEND

INTERIOR

EXTERIOR

4-5/16”

4”

EXTENDEDSTRIKEPLATEfor 1-3/4” Door Only

KT745ESPXsatin finishKT745ESPQbronze powder coat

HARDWARELEGENDPS Pivot setWPS Wall pivot setMCS Meeting carrier setICS Intermediate carrier setLCS Left carrier setRCS Right carrier setHHS Half offset hinge setHS Hinge set (flat)FB FlushboltESP Extended strike plateDH Door holdMAG MagnetTP Twinpoint

2L

2L1R

3L

3L1R

4L

4L1R

3L2R

5L

3L3R

7L

4L3R

5L2R

5L3R

6L

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

E2 HARDWARE LIST FOR DOOR CONFIGURATIONS Passage set/lock, flushbolt, astragal & hardware placement for outswing applications

From left to right

Configuration is always determined when viewing system from exterior side, going from left to right.

Use “D” pull handle on exit door (outswing system) where passage set / lock not required. Use flushbolts top and bottom to lock door from the inside only. Note: exit door not accessible from exterior.

INTERIOR

EXTERIOR

OUTSWING

INSWING

INTERIOR

EXTERIOR

3L

3LI

How To Determine Swing Of Systems

FB FB3L INTERIOR

EXTERIOR

outswing application “D” pull handle option

Use one “D” pull handle on each pair of inswing doors to pull open and close doors.

Inswing application “D” pull handle optionFB FB

5RI

INTERIOR

EXTERIOR



2x KTE2CPS pivot set2x KTE2CICS intermediate carrier set1x KTE2CLCS left carrier set3x KTE22HHS half offset hinge set6x KTDB non-keyed flushbolt




1x KTE2CPS pivot set1x KTE2CLCS left carrier set1x KTE2HS hinge set2x KTDB non-keyed flushbolt

2x KTE2CPS pivot set1x KTE2CLCS left carrier set1x KTE2HS hinge set2x KTDB non-keyed flushbolt


2x KTE2CPS pivot set1x KTE2CICSintermediate carrier set1x KTE22HHS half offset hinge set4x KTDB non-keyed flushbolt

2x KTE2CPS pivot set1x KTE2CMCS meeting carrier set2x KTE2HS hinge set4x KTDB non-keyed flushbolt




MCS

RCS

RCS

LCS

LCS

MCS

LCS

LCS

LCS

LCS

HS

HS

HS

HS

HS

HS

HS

HS

HSHS

HS

PS

PS

PS

PS

PS PS

PS

PS PS

PS

PS PS

PS

PS PS

PS

PS

PS

PS

PS

HHS

HHS

HHS

HHS

HHS

HHS

HHS

HS

HHS

HHS HHS

HHS

HHSHHS

HHS

ICS

ICS

ICS

ICS

ICS

ICS

ICS ICS

ICS ICS

ICS

ICS

ICS ICS

ICS

ICS

ICS

WPS

DHESP

DH

DHESP

DH

DH

ESP

DH

DH

FB

FB

FB

FBFB

FB FB

FB FB

FB FB

FB FB

FB FB

FB FBFB

FB FBFB

FB FBFB

FB FBFB

1x KTE2CLCSleft carrier setPer pair of doors:

1x KTE2CRCSright carrier set1x KTE2HShinge set2x KTDBnon-keyed flushbolt

FB

DH

PASSAGESETLOCKBYOTHER

FLUSHBOLTSTOP&BOTTOM

TWINPOINTOPTIONTOFB

FLOATINGDOORPAIRS

ASTRAGAL

DOORHOLD

LEGEND

INTERIOR

EXTERIOR

4-5/16”

4”

EXTENDEDSTRIKEPLATEfor 1-3/4” Door Only

KT745ESPXsatin finishKT745ESPQbronze powder coat

HARDWARELEGENDPS Pivot setWPS Wall pivot setMCS Meeting carrier setICS Intermediate carrier setLCS Left carrier setRCS Right carrier setHHS Half offset hinge setHS Hinge set (flat)FB FlushboltESP Extended strike plateDH Door holdMAG MagnetTP Twinpoint





2R

1L2R

3R

1L3R

2L2R

1L4R

4R

2L3R

5R

3L4R

7R

2L5R

8R

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

maybereversed

HHS

FB

intermediate carrier & guide set left carrier & guide setINTERIOR

EXTERIORpivot set

flushbolts flushbolts

half offset hinge set flat hinge setpassage set

pivot set

jamb doorjamb doorbasic door

leadingdoor

service door

door hold

3L2R Hardware Application

E2 HARDWARE LIST FOR DOOR CONFIGURATIONS Passage set/lock, flushbolt, astragal & hardware placement for outswing applications

From left to right

Adhesive black gasket for optimum sealing performance around all hinge flaps. Gasket compatible with E2 & E3 hinges.

neoprene black gasket

KTE3HGASKET

© Copyright 2018 • Eclipse Architectural®FULL SCALE EXCEPT AS NOTED8

ECLIPSE KT795 (8”) OUTSWING SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESS

New Generation Sill with Flushbolt Pin Channel, Compatible with E2 & E3 Systems.

Extrusion Alloy 6063 T5. Actual Full Sill Width: 8” (203mm) Channel Sill for Flushbolt or Twinpoint.

KT795E3FIRC Clear anodizedKT795E3FIRD Bronze anodized

KT78

0SPC

Prot

ectiv

e vi

nyl s

ill c

over

for s

ill n

ose

KT77

0SPC

Prot

ectiv

e vi

nyl s

ill c

over

for i

nter

ior f

ir to

p

EXTE

RIO

R

19/3

2”

(15m

m)

1-3/

16”

(30m

m)

wee

p ho

le

wee

p ho

les

2-5/

32”

(54m

m)

2-7/

32”

(57m

m) Fi

r top

WOODSUBSTRATE

3/8”

(9

.5m

m)

1-3

/4”

(44.

5mm

)

13/3

2” (1

0mm

)

8” (2

03m

m)

1/4”

(6m

m)

E2 b

otto

m

hing

e &

gui

de

6-9/

16”

(166

.7m

m)

jam

b lin

e

DS434

Kerf

seal

KT841

Redu

cer

KT795

Sill

KT795COVERBLVE

PVC

inse

rt, b

lack

6-9/

16”

(166

.7m

m)

jam

b lin

e

DS369A7145BL

Alum

inum

T-s

lot

extru

sion

with

gra

ypi

le in

sert

viny

l cha

nnel

inse

rt

Cent

re o

f top

trac

k to

ce

ntre

of b

otto

m c

hann

el

23/3

2” (1

8.5m

m)

DBOT

se

ries

Flus

hbol

t

Two

lock

ing

optio

ns: Tw

inpo

int

Sill is fabricated as shown by Eclipse Architectural

© Copyright 2018 • E clipse Architectural® FULL SCALE EXCEPT AS NOTED 9

New Generation Sill with Flushbolt Pin Channel, Compatible with E2 & E3 Systems.

1-3/

16”

(30m

m)

6-9/

16”

(167

mm

)

6-9/

16”

(166

.7m

m)

jam

b lin

eE2

bot

tom

hi

nge

& g

uide

19/3

2”

(15m

m)

13/3

2”(1

0mm

)1/

4” (6

mm

)

viny

l cha

nnel

inse

rt

wee

p ho

les

2-5/

32”

(54m

m)

FIRTOP

WOODSUBSTRATE

1-3

/4”

(44.

5mm

)

2-7/

32”

(57m

m)

KT775

Sill

KT841

Redu

cer

3/8”

(9

.5m

m)

DS434

Kerf

seal

KT795COVERBLVE

PVC

inse

rt, b

lack

6-9/

16”

(166

.7m

m)

jam

b lin

e

wee

p ho

le

Cent

re o

f top

trac

k to

cen

tre o

f bo

ttom

cha

nnel

23

/32”

(18.

5mm

)

DS369A7145BL

Alum

inum

T-s

lot

extru

sion

with

gra

ypi

le in

sert

Sill is fabricated as shown by Eclipse Architectural

Extrusion Alloy 6063 T5. Actual Full Sill Width: 6-9/16” (166.7mm) Channel Sill for Flushbolt or Twinpoint.

ECLIPSE KT775 (6-9/16”) OUTSWING SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESS

KT775E3FIRC Clear anodizedKT775E3FIRD Bronze anodized

KT77

0SPC

Prot

ectiv

e vi

nyl s

ill c

over

for i

nter

ior f

ir to

pKT

760S

PCPr

otec

tive

viny

l sill

cov

er fo

r sill

nos

e

EXTE

RIO

R

DBOT

ser

ies

Flus

hbol

t

Two

lock

ing

optio

ns: Tw

inpo

int


E2™ JAMB FOR 1-3/4” (44.5MM) DOOR THICKNESSExterior E2 Folding Door, Outswing Application.

11/1

6”(1

7.5m

m)

1/8”

(3m

m)

1/8”

(3m

m)

11/1

6”(1

7.5m

m)

9/16

”(1

5mm

)

1-5/

8”(4

1mm

)

3/8”

(9.5

mm

)

4-3/

8”(1

10.6

mm

)

6-9/

16”

(167

mm

)

DS434

kerf

seal

inse

rt

CL

CL

CL

REF

REF

9/32

”(7

mm

)

Drop

bolt

mac

hini

ng

cent

ered

at s

tile

wid

th

with

ded

icat

ed ro

uter

bi

ts.

7/64

”(2

.5m

m)

R =

1/64

” (0

.5m

m)

7/64

” (2

.8m

m)

DS416

kerf

seal

inse

rt

9/16

”(1

4mm

)

1-7/

16”

(36m

m)

23/3

2” (1

8.5m

m)

Flus

hbol

t mac

hini

ng d

epth

:1)

KTDBSY

9/1

6” (1

4mm

)2)

KTDBOC

43/

64”

(17m

m)

3) KTDBOE

43/

64”

(17m

m)

4) KTDBOT

3/4

” (1

9mm

)

5/16

” (8

mm

)

5/16

”(8

mm

)

19/6

4”(7

.5m

m)

1-3/

4”(4

4.5m

m)

EXTE

RIO

R

Actu

al m

achi

ning

for f

lush

bolts

(fac

e pl

ate)

1-27

/64”

x 7

-7/8

” (3

6mm

x 2

00m

m)

1-27

/64”

x 1

5-3/

4” (3

6mm

x 4

00m

m)

1-27

/64”

x 2

3-5/

8” (3

6mm

x 6

00m

m)

1-27

/64”

x 3

9-3/

8” (3

6mm

x 1

000m

m)

Rout

er b

its a

re a

vaila

ble


KT49 TOP TRACK FOR E2™ HEADER & 1-3/4” (44.5MM) DOOR THICKNESSExterior E2 Folding Door, KT49 Outswing Application Only. Channel Top Track for Flushbolt or Twinpoint.

New Generation Top Track with Flushbolt Pin Channel.

KT49C Clear anodizedKT49D Bronze anodized

EXTE

RIO

R

DS434

Kerf

seal

2-3/

16”

(56m

m)

2-7/

8”(7

3mm

)

6-9/

16”

(167

mm

)Ja

mb

line

6-9/

16”

(167

mm

)Ja

mb

line

1-3/

16”

(30.

5mm

)5-

3/8”

(136

.5m

m)

6-9/

16”

(167

mm

)

KT49

Top

track

1-5/

8” (4

1mm

)

11/1

6”(1

7.5m

m)

11/1

6”(1

7.5m

m)

1-1/

2”(3

8mm

)

Cent

re o

f top

trac

k to

cen

tre o

f bo

ttom

cha

nnel

23

/32”

(18.

5mm

)

KT795COVERBLVE

PVC

inse

rt, b

lack

DS7145270BL

Pile

wea

ther

seal

, bla

ck


(24mm)15/16"

(22mm)

finished floor line

KT749drop bolt cup

Door height plus 3-1/4” (83mm)= R.O. (from finished floor line)door height plus 2-3/4” (70mm)= full jamb height

KT23CVor KT23DVfloor channel withPVC insert

cl

7/8"

(11mm)7/16"

(10mm)3/8"

(12.7mm)1/2"

(22mm)7/8" R.O.

(4.8mm)3/16"

minimum door thickness when using floor channel 1-3/8” (35mm)

2-1/4” (57mm)door thickness

INTERIOREXTERIOR

DS369dual door

bottom pile seals

KT23 OPTIONAL FLOOR CHANNEL APPLICATION FOR OUTSWING OR INSWING DOORSThis application is recommended for interior application, exterior non-rainfall weather conditions or undercover well protected doors2-1/4” (57mm) door, outswing application shown. Other door thickness may be used.

KT23D-RADIUS Floor channel radius bronze anodized with PVC insert, black 120” only (3048mm). Custom order, call for manufacturing time.

KT23DV Floor channel, bronze anodized with PVC insert, blackKT23BLVE PVC insert only, black

Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)

NOTE: Door height plus 4-1/4”: (107.9mm) = R.O. (from finished floor line to R.O. header) when using Eclipse frame specs.

KT788 E3 ADA LOWRISE ALUMINUM SILL FOR INSWING & OUTSWING DOORS

KT788E3D Bronze anodized only

ADA Compliant

EXTERIOR23/32”(18.5mm)

6-9/16” (166.7mm)

1/2”(12.7mm)

15/16”(23.6mm)

19/32”(15mm)

1-3/4”(44.45mm)

NO SCALE

drill round hole for pin

no flush bolt cup used

23/32”(18.5mm)

6-9/16” (166.7mm)

1/2”(12.7mm)15/16” (23.6mm)

finished floor line

19/32”(15mm)

KTDBSYFlush bolt

KT749flush bolt cup used,custom drilling required in sill

thermal break

1-3/4” (44.45mm) finished floor line

NO SCALE

Slopes of threshold may be ripped off to achieve flush sill application.


JAMB TO SILL ASSEMBLY

screws

jamb

fir top moulding

inserts snap into channel

E2 or E3 sill extruded aluminum clear or bronze anodized, with wood substrate and interior top moulding (fir)

KT768GASKET sill to jamb assembly gasket (adhesive backed)

KT23BLVEPVC insert, black

KT795COVERBLVEPVC insert, black

KT190C WOOD ASTRAGAL DETAIL FOR ECLIPSE E2 INTERIOR FOLDING SYSTEMTriple Seal For Superior Sealing Performance

DS434 kerf seal

DS434kerf seal

1-5/16” (33.34mm)KT190Castragalsupplied by Eclipse Architectural

2134mm (84”)2438mm (96”)2743mm (108”)3048mm (120”)clear fir astragal 1-1/8”

(28.5mm)

DSP10835BLKerf inserted fin pile

9/32”(7.14mm)

9/32”(7.14mm)

1/8” (3.23mm)

1-3/4”(44.5mm)

door

kerf slot1/8” x 3/8”(3.18mm x 9.5mm)

DS434inserted weatherseal, brown, white or black

3/8” (9.5mm)

5/16” (7.94mm)

INTERIOR3º bevel on active door ie: 35-7/8” (911mm) inside measurementwidth of door.

36” (914.4mm) outsidemeasurement of door

5/32” (4mm)

INTERIOR

DSP10835BLKerf inserted fin pile

door with astragal

NOSCALE

1/8” (3.23mm)

NO SCALE


E2™ Hardware Placement (4L) Configuration, Outswing Application

Interior Applications

How To Determine Swing of Systems:

Hall or Living Room Another Room

The following is a guideline when determining outswing or inswing applications for the purpose of choosing correct hardware and flushbolts. NOTE: The interior/exterior designation (i.e. 3L) is still used for interior application because it just makes it easier to understand.

For example:

The above example (3LI) shows the system swinging into the bedroom and flushbolts on the same side. This would be an inswing system and the bedroom side is considered the interior side. Passage set only recommended for the swing door.

The above example (3L) shows the system swinging into another room and flushbolts on the bedroom side. This would be an outswing system and the bedroom side is considered the interior side. Passage set only recommended for the swing door.

The above example (2L2R) is not recommended for interior applications because of the potential of getting locked in a room without any exit. Other configurations not recommended. 2L, 2R, 4L, 4R, 6L, 6R, 8L, 8R; basically pairs or even number or door panels.

EXTERIOR

Notaccessible

2L2RINTERIOR

INTERIOR

EXTERIOR

OUTSWING3L

(FLUSHBOLT) BEDROOM SIDE

INSWING

INTERIOR

EXTERIOR3L1

(FLUSHBOLT) BEDROOM SIDE

bottom pivot

wall pivot

hingeintermediate guide

hinge with

handle

end guide

end carrierintermediate carrier

weathersealtop pivot

Latching Door Hold (DH)

KT740DHC Clear anodized KT740DHD Bronze anodized

T-Unit

set screenadjustment screw

main unit


FLUSHBOLTS FOR E2 OUTSWING FOLDING DOORS: DBOT SERIES

SELECT FINISH PRODUCT NUMBER DESCRIPTION

bronze powder coat finish on aluminum

KTDBOT200NRQ 8” (200mm), 1” throw, round endKTDBOT400NRQ 16” (400mm), 1” throw, round endKTDBOT600NRQ 24” (600mm), 1” throw, round endKTDBOT1000NRQ 39” (1000mm), 1” throw, round end

brushed metallic finish on aluminum to match stainless steel

KTDBOT200NRX 8” (200mm), 1” throw, round endKTDBOT400NRX 16” (400mm), 1” throw, round endKTDBOT600NRX 24” (600mm), 1” throw, round endKTDBOT1000NRX 39” (1000mm), 1” throw, round end

bright gold finishon aluminum

KTDBOT200NRG 8” (200mm), 1” throw, round endKTDBOT400NRG 16” (400mm), 1” throw, round endKTDBOT600NRG 24” (600mm), 1” throw, round end

SPECIFICATIONSMax wind load: 450kg (990lb) forceMin door thickness: 1-3/4” (44.5mm)Throw length: 1” (25mm)Finishes: Bronze powder coat on aluminum to match pvd bronze finish on E3 hinges. Brushed metallic on aluminum to match stainless steel finish on E3 hinges. Bright gold (G) finish on aluminum to match pvd brass finish on E3 hinges.

The flush-mounted flushbolts, rounded style and 1” (25mm) throw are designed for use with sliding and folding doors. This flushbolt will resist high winds and is rated to resist a 250kg load in Western Red Cedar and 450kg in Amoora. The bolts are easily installed with a dedicated router bit and are available in three finishes.

PLEASE NOTE: Flushbolt housing & slide bar are manufactured from aluminum components

1” (25mm) throw length regardless of bolt length

INTERIOR

Architectural Detail

2-7/16” (62mm)

13/16” (20.6mm)

7/8”(22mm)

KTE2DBFORB Router bit for flushbolts (dedicated router bits are available)

Bright gold (G) finish is custom order, call for manufacturing time.

flushbolt machining centered at stile width

R = 1/64” (0.5mm)9/16” (14mm)

CL

1-27/64” (36mm)

1/8”(2.5mm)

3/4”(19mm)

KT749 Flushbolt cup used with floor channel and ADA sill

Flushbolt cup used with floor channel and ADA sillKT749BRONZE bronze powder coatKT749DCH Satin chrome


Strike plate for headerKTDBSPQ bronze powder coat KTDBSPS Satin chrome

7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

1-27/64”(36mm)

43/64” (17mm)

35/64” (14mm)

47/64” (18.6mm)

pin diameter 25/64” (10mm)

35/64” (14mm)

1” (25mm)

Flushbolt Assembly

Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm) 1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 15-3/4” (36mm x 400mm) 1-27/64” x 39-3/8” (36mm x 1000mm)



bright gold finishover aluminum

KTDBSY200NRG 8” (200mm), 1” throw, round endKTDBSY400NRG 16” (400mm) 1” throw, round endKTDBSY600NRG 24” (600mm) 1” throw, round end

powder coat finishbronze overaluminum

KTDBSY200NRQ 8” (200mm) 1” throw, round endKTDBSY400NRQ 16” (400mm) 1” throw, round endKTDBSY600NRQ 24” (600mm) 1” throw, round endKTDBSY1000NRQ 39” (1000mm) 1” throw, round end

brushed metallic finish over aluminum to match stainless steel

KTDBSY200NRX 8” (200mm) 1” throw, round endKTDBSY400NRX 16” (400mm) 1” throw, round endKTDBSY600NRX 24” (600mm) 1” throw, round endKTDBSY1000NRX 39” (1000mm) 1” throw, round end

SPECIFICATIONSMax wind load: 450kg (990lb) forceMin door thickness: 1-3/4” (44.5mm)Bolt lengths: 7-7/8” (200mm), 15-3/4” (400mm), 23-5/8” (600mm), 39-3/8” (1000mm)Finishes: Bright gold to match pvd brass hardware bronze powder coat on aluminum to match the pvd bronze hardware & brushed metallic to match stainless steel hardware

INTERIOR

Architectural Detail Flushbolt Assembly

2-7/16” (62mm)

13/16” (20.6mm)

7/8”(22mm)

flushbolt machining centered at stile width

R = 1/64” (0.5mm)9/16” (14mm)

CL

1-27/64” (36mm)

1/8”(2.5mm)

3/4”(19mm)

KT749 Flushbolt cup used with floor channel and ADA sill

PLEASE NOTE: Flushbolt housing & slide bar are manufactured from aluminum components

KTE2DBFORB Router bit for flushbolts (dedicated router bits are available)

Flushbolt cup used with floor channel and ADA sillKT749BRONZE bronze powder coatKT749DCH Satin chrome

Strike plate for headerKTDBSPQ bronze powder coat KTDBSPS Satin chrome

7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

1-31/32”(50mm)

1-27/64”(36mm)

17/32”(13mm)

pin diameter9/16 (14mm)

1” (25mm)

The flush-mounted flushbolts, rounded style and 1” (25mm) throw are designed for use with sliding and folding doors. Symphony™ will resist high winds and is rated to resist a 250kg load in Western Red Cedar and 450kg in Amoora. The bolts are easily installed with a dedicated router bit and are available in three finishes.

Symphony™

FLUSHBOLTS FOR E2 OUTSWING FOLDING DOORS: DBSY SERIESUsed with KT788 ADA Sill and KT23 Floor Channel


Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm) 1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 15-3/4” (36mm x 400mm) 1-27/64” x 39-3/8” (36mm x 1000mm)



bright gold finishover aluminum

KTDBSY200NRG 8” (200mm), 1” throw, round endKTDBSY400NRG 16” (400mm) 1” throw, round endKTDBSY600NRG 24” (600mm) 1” throw, round end

powder coat finishbronze overaluminum

KTDBSY200NRQ 8” (200mm) 1” throw, round endKTDBSY400NRQ 16” (400mm) 1” throw, round endKTDBSY600NRQ 24” (600mm) 1” throw, round endKTDBSY1000NRQ 39” (1000mm) 1” throw, round end

brushed metallic finish over aluminum to match stainless steel

KTDBSY200NRX 8” (200mm) 1” throw, round endKTDBSY400NRX 16” (400mm) 1” throw, round endKTDBSY600NRX 24” (600mm) 1” throw, round endKTDBSY1000NRX 39” (1000mm) 1” throw, round end

NEW E2 SILLS WITH TWO LOCKING OPTIONS

Flushbolt

For 1-3/4” (44.5mm) Door Thickness

The New DBOT Series flushbolt & New LT2 Twinpoint lock were designed to utilize the same channel in both of the new E2 sills and the new E2 Top Track, thus giving you the option to now offer your customer the original flushbolt design or the simple hand rotation of the single handle, driving a 1” throw into the head and sill.

KT795 Sill

snap in covers for channels

Twinpoint

KT775 Sill

DBOT Series Flushbolt

LT2 Series Twinpoint

ECLIPSE TWINPOINT LOCK & SWING HANDLESpecifications

Function

Style

Testing

The LT2 operates easily with a simple handle rotation, driving a 1” (25mm) throw into the head and sill. This makes it one of the most secure bolt locks on the market. An installed Twinpoint system is completely accessible and serviceable.For people with mobility impairments, the Twinpoint offers the security of two flushbolts, but without the access problems associated with flushbolts being too high or low to reach, and hard-to-grip door handles.

LT2 has the sleek and clean styling synonymous with all Eclipse products. Their low profile allows any folding system, such as F3, E2, E3 or E4 to stack neatly, without intrusive door furniture getting in the way. Eclipse Twinpoint locks are fully concealed within the door stile, avoiding long or hard-to-reach dropbolts fixed to the door face, particularly on tall doors. The Eclipse Twinpoint is an unobtrusive, functional and sleek locking solution.

The Centor LT2 has been tested to 100,000 cycles at maximum configuration to ensure smooth working order beyond their 10 year warranty period. The LT2 Twinpoint locking system has also been exposed to dust, mud, sand and corrosive atmospheres to ensure they stand up to real life use. This includes exposure to salt spray for seaside installations.

Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel.

Minimum door thickness: 1-3/8” (35 mm) / Minimum rod length: 15” (381 mm) / Throw length: 1” (25 mm) / Uses: folding, french & sliding

twinpoint & swing handle



multipoint &lever lock set

4L 3L


LT2 TWINPOINT LOCK & DF3 (ALUMINUM) OR DF4 (STAINLESS STEEL) SWING HANDLESKit Components For Twinpoint Assembly

transmission rod

PLEASE NOTE: When ordering complete TwinPoint Assembly, you are required to order: transmission rod & cover plate, lock/gear box, swing handle & cups.

Twinpoint Lock assembly not available in PVD Brass (TG)

transmission rod

swing handle assembly(6 finishes)

lock/gear box

two finishes available on outer housing cover plate

PRODUCT # DESCRIPTION

EC TWINPOINT LOCK (LT2 MODEL) FOR USE WITH DF3 (ALUMINUM) & DF4 (STAINLESS STEEL) MODELSECLT2TRSN0924X TwinPoint transmission rod, cover plate and strike plate for 96” (2438mm) door height / brushed metallic aluminum finishECLT2TRSN0924Y TwinPoint transmission rod, cover plate and strike plate for 96” (2438mm) door height / black anodized finishECLT2TRSN0930X TwinPoint transmission rod, cover plate and strike plate for 120” (3048mm) door height / brushed metallic aluminum finishECLT2TRSN0930Y TwinPoint transmission rod, cover plate and strike plate for 120” (3048mm) door height / black anodized finish

EC LOCK GEAR BOX FOR EC TWINPOINT (LT2 MODEL)ECLT2NS Lock/gear box for EC TwinPoint transmission rod, cover plate & handle

EC SWING HANDLE DF3 (ALUMINUM) MODEL FOR EC TWINPOINT (LT2 MODEL)ECDF3SHNAL DF3 swing handle aluminum, black powder coatECDF3SHNAPCN DF3 swing handle aluminum, satin aluminum powder coatECDF3SHNAQ DF3 swing handle aluminum, bronze powder coat

EC SWING HANDLE DF4 (STAINLESS STEEL) MODEL FOR EC TWINPOINT (LT2 MODEL)ECDF4SHNSOL DF4 swing handle stainless steel, PVD bronze finishECDF4SHNSS DF4 swing handle stainless steel, brushed finish

CUP FOR SILL OR HEAD (MANDATORY FOR SILL, OPTIONAL FOR HEAD)ECLTBC8SS Brushed S.S. FinishECLTBC8SOL PVD Bronze Finish

TL2 ROUTER BITECLT2RB Router bit for LT2 TwinPoint Lock Assembly

ECLIPSE E3 DRILLING JIG FOR E3 HINGE PLACEMENT ON DOORKTE3DJ Eclipse E3 drilling jig for wood doors

STRIKE PLATE FOR HEAD (for replacement purposes only) ONE STRIKE SUPPLIED WITH TWINPOINT (STANDARD)

ECLTSP8SS Brushed S.S. FinishECLTSP8OL PVD Bronze Finish


LT2 TWINPOINT

LT2 Model twinpoint lock

DF3 model twinpoint swing handle (aluminum) orDF4 model twinpoint swing handle (stainless steel)

E2 top track

1-1/16”(27mm)

4-23/32”(120mm)

15-3/4”(400mm)

1-3/4”(44.5mm)

4-23/32”(120mm)

1” (25mm)

Standard = 36” (914mm)Minimum = 15” (381mm)

E2 or E3 floor channel used with twinpoint

New E2 or E3 Sill used in conjunction with Twinpoint


Twinpoint & Swing Handle



Multipoint &Lever Lock Set

4L 3L


WOOD STILE ROUTE PROFILE (OUTSWING APPLICATION) FOR LT2 MODEL

60.0°

9/32” (7.1mm)

5/64” (1.8mm)

Detail A

ECLT2RB Route stile

1-3/4” (44.5mm)

1-3/32”(27.80mm)

32/23”(18.4mm)

1/2”(12.7mm)

5/32”(4mm)

3/32”(2.5mm)

9/16”(14.4mm)

2-1/8”(54mm)

14-11/64”(360mm)

9-1/16” (230.2mm)

R 1/2”(12.7mm)

2-5/64” (53mm)

11/16” (18mm)

standard height9/14”

(36mm)

B

A

A

1-7/64” (28mm)

15/32” (12mm)

1-1/32”(26mm)

R7 9/32”(7.2mm)

3-3/16”(81mm)

4-61/64”(126mm)

13/64”(5mm)

Detail A

Back Set

min 1-3/8” (35mm)


1-11/16”(43mm)

R 13/32”(10.5mm)

13/16”(21mm)

11/64” (4.2mm)

21/64” (8.4mm)

1-3/4” (44.5mm)

19/64” (7.6mm)

E2 / E3 HINGE PLACEMENT OVER TWINPOINT

A A

5/32" (4mm)1-3/32" (27.8mm)

9/16"(14.4mm)

1-3/4" (44.5mm)

SECTION A-A

E2 Hinge

E3 hinge

Strike plate for head

Flushbolt cup used with floor channel

ECLTSP8SS Brushed s.s. finishECLTSP8OL PVD bronze finish

ECLTBC8SS Brushed s.s. finishECLTBC8SOL PVD bronze finish

2-13/32”(61mm)

TWINPOINT HINGE OFFSET THICKNESS OF DOOR PANEL PROGRAM

5/32” (4mm) 1-3/4” (44.45mm) E2, E3, F2, F3

7/16” (11mm) 2-1/4” (57.15mm) E4


DF3 TwinPoint Swing Handle, Choice of 4 Finishes Over Cast Aluminum

LT2 TwinPoint Housing Cover Plate Finishes

LT2 Transmission HousingBrushed Metallic Aluminum or

Black Anodized finish

Swing HandleDF3: Aluminum handle (4 finishes)DF4: Stainless Steel Handle (2 finishes)

Finishes & MaterialsThe Twinpoint door furniture is available in a range of finishes to suit any door or décor.

Brushed Metallic Aluminum Black Anodized Aluminum

Satin Aluminum Powder Coat Black Powder Coat Bronze Powder Coat

DF4 Twinpoint Swing Handle (SS) Choice of 2 Finishes

PVD bronze over stainless steel

Brushed stainless steel

PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied.





multipoint &lever lock set

4L

3L

Twinpoint Lock assembly not available in PVD Brass (TG)

LT2 Model Twinpoint


FLUSHBOLT PLACEMENT

MANUAL DOOR CALC

Suggested flushbolt lengths for door heights 80” to 108” (2.032m to 2.74m)

NOTE: End user may require longer flushbolts for top of doors for easier reach. When using E2 hardware for folding windows, top flushbolt length must be specified.

MAGNETSKTEMAG “Magnets” for holding the door panels in the open position

Pivot door to jamb 9/32” (7mm)Swing door to jamb 9/32” (7mm)Panel to panel gap 5/32” (4mm)Bottom of door panel to sill 3/8” (9.5mm)Top of door panel to header 3/16” (5mm)Inside face of door panel to stop 3/8” (9.5 mm)

1. Door Height plus 4-3/8” (111mm) = R.O. when using outswing E2 Sills and Frame specs.

2. Door Height plus 3-13/16” (97mm) = R.O. from finished floor line when using KT788E2 ADA Sill

3. Door Height plus 3-1/4” (83mm) = R.O. from finished floor line when using E2 floor channel.

Clearances Rough Opening Specs For E2

Manual calculation for determining R.O. (i.e. Configuration 1L3 R, i.e. Door panel size 36" x 84" [914mm x 2134mm])

Width1) Jamb to Stud - typical 1/4" (6mm) shimming x 2 = .5" (12mm)2) Jamb thickness 11/16" (17.5mm) x 2 = 1.375" (34.9mm)3) Panel to Jamb - Clearance 9/32" (7mm) x 2 = .5624" (14mm)4) Panel to Panel - Gap 5/32" (4mm) x 3 = .4686" (12mm) 5) Panel width 36" (914”) x 4 = 144" (3656mm)

Height 6) Frame header to R.O. header. Typical 1/2” (12mm) shimming x 1 = .5” (12mm) 7) Frame header 2-3/16” (56mm) x 1 = 2.1875” (56mm) 8) Top of door panel to frame header 3/16” (5mm) x 1 = .1875” (5mm) 9) Door panel height 84” (2134mm) x 1 = 84” (2134mm)10) Bottom of door panel to top of sill 3/8” (10mm) x 1 = .375” (10mm)11) Sill height 1-3/16” (30.16mm) x 1 = 1.1875 (30.16mm)

R.O. (width) 146-29/32" or 146.906” or (3731mm) or (3.73m)

R.O. Height 88-7/16” or 88.4375” or (2246mm) or (2.24m)

For O.S.M. width of unit take R.O. minus 1/2"(12mm) i.e. 146 29/32"(3731mm) -1/2"(12mm) = 146 13/32" (3718mm).

For O.S.M. height of unit take R.O. minus 1/2”(12mm). i.e. 88-7/16” (2246mm) minus 1/2” (12mm) = 87-15/16” (2234mm).

1L3R

R.O.

INTERIOR

EXTERIOR

3

2 2

31 15 5 5 5

4 4 4

R.O.

EXTERIOR INTERIOR

6

87

9

1011

up to 84”(2134mm)

84-1/16”to 96”(2159mmto 2438mm)

96-1/2” to 108” (2403mmto 2743mm)

108-1/16”to 118”(2768mm to2997mm)

8” (200mm)flushbolt








KTEMAG (sold as pairs)

13/16”(20.6mm)2-3/8”

(60.3mm)

I.E. 5L

door hold

magnets

3L


KTE2CPSS pivot set, stainless steelKTE2CPSOL pivot set, bronze powder coatKTE2CPSTG pivot set, PVD brass (TG)

KTE3WPSS wall pivot set, stainless steelKTE3WPSOL wall pivot set, bronze powder coatKTE3WPSTG wall pivot set, PVD brass

KTE2CLCSS left hand carrier set, stainless steelKTE2CLCSOL left hand carrier set, bronze powder coatKTE2CLCSTG left hand carrier set, PVD brass

KTE2CRCSS right hand carrier set, stainless steelKTE2CRCSOL right hand carrier set, bronze powder coatKTE2CRCSTG right hand carrier set, PVD brass

KTE2CMCSS meeting carrier set, stainless steelKTE2CMCSOL meeting carrier set, bronze powder coatKTE2CMCTG meeting carrier set, PVD brass

E2 HARDWARE SELECTION

PIVOT SET

WALL PIVOT SETS

RIGHT CARRIER SET

LEFT CARRIER SET

MEETING CARRIER SET






PARTS ON PANELS

PARTS ON PANELS

PARTS ON PANELS

PARTS ON PANELS

PARTS ON PANELS

2L2R & 4L4R Application

(PVD Brass is custom order, 9-12 week delivery time)






KTE22HSS hinge set, stainless steel KTE22HSOL hinge set, bronze p.cKTE22HSTG hinge set, PVD brass

KTE22HHSS half offset hinge set, stainless steelKTE22HHSOL half offset hinge set, bronze p.c.KTE22HHSTG half offset hinge set, PVD brass

KTE2CICSS intermediate carrier set, stainless steelKTE2CICSOL intermediate carrier set, bronze powder coatKTE2CICSTG intermediate carrier set, PVD brass

E2 HARDWARE SELECTION

INTERMEDIATE CARRIER & GUIDE SETS

HALF OFFSET HINGE SETS (WITH HANDLE)

SINGLE SETS (WITH HANDLE)




PARTS ON PANELS

PARTS ON PANELS

PARTS ON PANELS




KTDCAS Satin Aluminum Finish KTDCAOL Black Finish KTDCATG Brass Finish

Door Hold Magnets (optional)

© Copyright 2018 • Eclipse Architectural®26

E2i internal bifold system without a bottom sill or floor channel is based on Eclipse’s standard E2 hardware system and uses Centor’s proven bifold window technology. For interior applications only, it is designed for seamless transitions between rooms and interior spaces. All the benefits of the versatile E2 system are preserved.

E2i features include:• Laterally adjustable bottom pivot• All stainless steel construction• No need for costly tile and concrete cutting• Complete horizontal and vertical adjustment

(No Sill Or Floor Channel Required)

E2I INTERIOR FOLDING DOOR HARDWARE SYSTEM

EXTERIOR FOLDING DOOR SYSTEMS

E2i


E2I SPECIFICATIONS

Max opening 24’ (7.3m)

Max panel weight 90lb (40kg) per panel

Max panel height 96” (2438mm)

Max panel width 36” (914mm)

Min panel thickness 1-3/8” (35mm)

Max number of panels 8 (4 each direction)

E2i internal bifold system without a bottom sill or floor channel is based on Eclipse’s standard E2 hardware system and uses Centor’s proven bifold window technology. For interior applications only, it is designed for seamless transitions between rooms and interior spaces. All the benefits of the versatile E2 system are preserved.

E2i features include:• Laterally adjustable bottom pivot• All stainless steel construction• No need for costly tile and concrete cutting• Complete horizontal and vertical adjustment

Weathersealing (optional)

No sill or floor channel

DS434 Weatherseal for sill, jamb and header. Black, brown or white

DS416 Weatherseal for between doors. Black, brown or white

DS369A7145BL Aluminum T-slot extrusion with black pile insert, for bottom of doors

DS415BL Black DS415W White weatherseal for between doors, use on clad doors where kerf slot is not possible


panel width

panel thickness

21/32” (16.7mm)

19/32” (15mm)hinge offset

19/32” (15mm) panel offset

KTE2I TOP VIEW

KTE2IBPPSS

KTE2IBPICSS

KTE2IBPECSS

pivot set s.s.

intermediate carrier set s.s.

end carrier set s.s.

KTDBSY200NRX 8”KTDBSY400NRX 16”KTDBSY600NRX 24”

KTE2IBPMCSS Meeting carrier sets s.s. (not shown) Used in configurations as follows:

4L4R

2L2R

Flushbolts

flushbolt

flushbolt at bottom (optional)

flushbolt at bottom (optional)no sill or floor

channel required

flushbolt

jamb mounted bottom pivot

jamb mounted

gasketing between panels

(Refer to E2 Full Line Catalogue for flushbolt machining details)


E2I ARCHITECTURAL DETAIL

9/32”(7.5mm)

9/32”(7.5mm)

9/32”(7.5mm)jambclearance

9/32”(7.5mm)jambclearance

5/32”(4mm)

5/32”(4mm)

5/32”(4mm)

9/32” (7mm)jamb clearance

5/32” (4mm)hinge allowance



9/32” (7mm)jamb clearance

E2i only available for the following configurations

4L4R

4R

2L2R

2R

4L

2L


panel thickness minus5/32” (3.8mm)

9/32” (7.5mm)panel to head clearance

3/16” (5mm) to face of door

9/32” (7.5mm) panel to sill clearance

2-3/8” (60mm)

19/32” (15mm)

1-3/8” (35mm)

1-1/2 (38mm)

KTE2I CROSS SECTION


E2I COMPONENTS • Only one finish available for the KTE2i Hinges: Brushed Stainless Steel

KTE2IBPPSS KTE2IBPICSS

KTE2IBPECSS KTE2IBPMCSS

KTE2HSS KTE22HHSS

Pivot set, brushedstainless steel

Intermediate carrier set, brushed stainless steel

End carrier set, brushed stainless steel

Meeting carrier set, brushed stainless steel

Hinge set (flat), brushed stainless steel

Hinge set (offset), brushed stainless steel

TOP TRACK

KT41C clear anodizedKT41D bronze anodized

FLUSHBOLTS

Round end, Symphony style 1” (25.4mm) throw length.

Finishes: Bright gold to match pvd brass hardware bronze powder coat on aluminum to match the pvd bronze hardware & brushed metallic to match stainless steel hardware

7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

1-27/64”(36mm)

1” (25mm)

Head Office & Manufacturing Centre, Vancouver, Canada7470 Buller Avenue, Burnaby, B.C. V5J 4S5 CanadaPhone: (604) 451-1080 • Fax: (604) 451-1140 • [email protected] Vancouver, B.C., please use our toll free numbers: Phone: 1-888-520-9009 Fax: 1-800-567-2887

Branch Office & Distribution Centre, Toronto, CanadaPhone head office toll free 1-888-520-9009 for branch address

Branch Office & Distribution Centre, Los Angeles, CaliforniaPhone head office toll free 1-888-520-9009 for branch address

Eclipse Architectural® Corporate ShowroomsVancouver & Toronto, Canada • Los Angeles, California, USA

Exterior Folding Door Systems

exterior folding door systems · the eclipse e2™ system is designed for folding doors in exterior...

Documents