extensive range of products increase in stocks sizes ... · extensive range of products increase in...
TRANSCRIPT
Volume 1
Extensive Range of ProductsIncrease in Stocks Sizes & Varieties
Standard Components for Plastic Mold
MISUMI World Network
International SupportMISUMI Corporation Press Die Components Team TEL: 81-3-3647-7114 FAX: 81-3-3647-7030
MISUMI USA, INC.
MISUMI UK LTD.
MISUMI EUROPA GmbH
MISUMI(THAILAND) CO., LTD.
MISUMI KOREA CORP.
MISUMI TAIWAN CORP.
SHANGHAI MISUMIPRECISION MACHNERY CO., LTD.
MISUMI E.A. HK LTD.
MISUMI SOUTH EAST ASIA PTE.LTD.
MISUMI MALAYSIA SDN. BHD.
TEL: 1-847-843-9105
TEL: 44-1784-465530
TEL: 49-0-700-9994-1670
TEL: 66-38-959-200
TEL: 82-2-551-3611
TEL: 886-2-2570-3766
TEL: 86-21-6391-7080
TEL: 852-2375-4550
TEL: 65-6733-7211
TEL: 603-7960-8499
FAX: 1-847-843-9107
FAX: 44-1784-466695
FAX: 49-0-700-9994-3600
FAX: 66-38-959-202
FAX: 82-551-4811
FAX: 886-2-2570-3767
FAX: 86-21-6391-7085
FAX: 852-2302-4589
FAX: 65-6733-0211
FAX: 603-7960-7499
MISUMI Corporation4-43, Toyo 2-chome, Koto-ku,Tokyo 135-8458 JapanTel: +81-3-3647-7111 Fax: +81-3-3647-6241http://jp.misumi-ec.com/
MISUMI USA, INC.1717 Penny Lane, Suite 200, Schaumburg,Illinois 60173 USATel: +1-847-843-9105 Fax: +1-847-843-9107http://us.misumi-ec.com/Customer Service: [email protected] Inquiries: [email protected]
MISUMI KOREA CORP.3804 World Trade Center 159-1,Samsung-dong, Kangnam-gu, Seoul,135-729, KoreaTel: +82-2-551-3611 Fax: +82-2-551-4811http://kr.misumi-ec.com/[email protected]
MISUMI EUROPA GmbHKatharina-Paulus-Strasse 6, 65824 Schwalbach,GermanyTel: +49-6196-7746-0 Fax: +49-6196-7746-360http://[email protected]. OfficeTel: +44-20-3051-4809Rappresentanza Italiana OfficeTel: +39-02-6203-2225
MISUMI E.A.HK LTD.香港三住有限公司3/F., Malaysia Building, 50 Gloucester Road,Wanchai, Hong KongTel: +852-8303-2781 Fax: +852-8303-2782
MISUMI (CHINA) PRECISIONMACHINERY TRADING CO., LTD.米思米 (中国) 精密机械貿易有限公司16th Floor, Jinling Hai Xin Bldg,No666 Fuzhou Rd., Shanghai 200001 P.R. ChinaTel: +86-21-6391-7080 Fax: +86-21-6391-7085Shanghai: http://cn.misumi-ec.com/Guangzhou: http://cn2.misumi-ec.com/[email protected] OfficeTel: +86-20-8527-1038 Fax: +86-20-8527-1686Tianjin OfficeTel: +86-22-2302-9228 Fax: +86-22-2302-9350Wuxi OfficeTel: +86-510-8521-7176, +86-510-8521-9793Fax: +86-510-8521-9651Shenzhen OfficeTel: +86-755-8287-2420 Fax: +86-755-8287-2096Ningbo OfficeTel: +86-574-8706-6835 Fax: +86-574-8706-6839
Gurgaon OfficeTel: +0124-424-1662Chennai OfficeTel: +91-20-6647-0000 Fax: +91-20-6647-0000
MISUMI INDIA Pvt. Ltd.3rd Floor, ONYX Building, North Main Road,Koregaon Park, Pune -411001 Maharashtra, IndiaTel: +91-20-6647-0000 Fax: +91-20-6647-0050http://[email protected]
MISUMI (THAILAND) CO., LTD.300/24 Moo 1, Eastern SeaboardIndustrial Estate Soi 5, Tambol Tasith,Amphur Pluakdaeng, Rayong Province 21140, ThailandTel: +66-38-959-200 Fax: +66-38-959-202http://[email protected]
MISUMI TAIWAN CORP.台灣三住股份有限公司9F-1,No.126, Nanjing East Road Sec.4,Taipei 10595 Taiwan R.O.C.Tel: +886-2-2570-3766 Fax: +886-2-2570-3767http://tw.misumi-ec.com/[email protected]
MISUMI SOUTH EAST ASIA PTE. LTD.331 North Bridge Road, #05-03, Odeon Towers,Singapore 188720Tel: +65-6733-7211 Fax: +65-6733-0211http://sg.misumi-ec.com/[email protected]
Representative Vietnam Office (Ho Chi Minh)Tel: +84-8-5-4499555 Fax: +84-8-5-4499559
MISUMI MALAYSIA SDN BHDUnit 1206, 12th Floor Menara Amcorp No.18, Jalan Persiaran Barat 46050 Petaling Jaya, Selangor, MalaysiaTel : +603-7960-8499 Fax : +603-7960-7499http://my.misumi-ec.com/[email protected]
Standard Components for Plastic M
old 2011 Volume 1
Ejector Pins, Ejector Sleeves &Core PinsCODE: EPH EPHJ ERPH ESNV ESN CPD CPH etc. P. 1~24
Angular PinsCODE: AP APZ APU APUS etc. P. 25~30
Leader Pins & BushingsCODE: GPH GBH GBS GBHE GBSE GBAM GBBM P. 67~74
Ejector Leader Pins & BushingsCODE: EGH EGHC EGBH EGBZ EGBLT EGBB etc. P. 85~91
or Sleeves &
SGP StockSGP Stock
SGP StockSGP Stock
SGP StockSGP Stock
SpringsCODE: WY WR WF WL WT WM WH SWY SWU SWR SWS SWF SWL SWM SWH SWB SWG WSW P. 166~192
MicroswitchCODE: EGS-ANGLE EGS-AV EGS-BOARD V-15-1A5-T etc. P. 93~94
Cooling ItemsCODE: KPM JPJ F120-PM NPL M-POC JTW WCP BFP ORG etc. P. 125~152
Parting LocksCODE: PL PLBS PLH PLL PLM PLS PLSZ PLSW MPLK MPLKH MLK MLKC P.25~116
PLASTIC MOLD STANDARD COMPONENTS
Visit www.my.misumi-ec.com (MISUMI MALAYSIA) or www.sg.misumi-ec.com (MISUMI SOUTH EAST ASIA)*Warehouse is located in Singapore.
Product information are also available on our website.
COMPONENTS
HIGHLIGHT
Sprue Bushings & LocatingRingsCODE: SBBK SBBP SBGK SBSD LAR LRBW LRK etc. P. 47~52
Taper Pin SetsCODE: TPN TPNV VTPN TPNC TPV TPNF TPNFC TPVX etc. P. 75~81
P 67 74P 67 74P. 67~74
SGP StockSGP Stock
rting Locks
SGP StockSGP Stock
SGP StockSGP Stock
WT WWY WR WF WWL WSWB SWG WWSW6 192
WY WR WF WWL WWT WWWY WR WF WWL W
SGP StockSGP Stock
Additional 800 Stock Items Total 2800 Items in Stock now
Delivery Shorten!
WIDE RANGE of TOP QUALITY
highlight page_last.ai 6/3/2011 7:27:56 PM
Line-up of Standard Components for Plastic Mold
Stepped Ejector PinsP.9~
Free Flange-position Ejector PinsStraight Ejector PinsP.1~
Rectangular Ejector PinsP.13~
Ejector SleevesP.15
Straight Center Pins
Steel Plates
Straight Core PinsP.23~
Taperless Center PinsStepped Center Pins
Steps-type Round Core Pins Taperless Core Pins Shaped Inlay Core Pins for Boss
Date Marked PinsCRecycle Marketed PinsCPins with Gas VentBlock Core PinsCCavity Inserts
Angular PinsCLocking BlocksP.25~
Slide CoresCLoose CoresP.31~
Guide RailsCCenter Rails
Sprue Bushings·Locating RingsP.47~
Components of RunnerP.53~
Components of GateP.59~
ElectrodesP.65~
Leader ComponentsP.67~
Components for PositioningP.75~
Components for Ejector SpaceP.85~
Couplers·Quick Fitting JointsP.121~
Mold Opening ControllersP.95~
JointsCHosesCCooling inside of moldP.140~
Heat Insulation SheetsHeating ItemsP.153~
Mold AccessoriesP.154~
BoltsCScrewsCWashersP.155~
Chemical Products
Components of Large MoldCoil SpringsP.163~
Components of Die Casting
Cover 2_page 00 Mold.ai 6/2/2011 9:37:27 AM
How to Start Business with MiSUMi
How to Order
For New Customers
Fill out the Customer Registration Form and send it to the Customer Service Department either by fax or e-mail. You
will receive your customer code once the registration procedure is completed.
For Existing Customers
1. Send in your inquiry with the details of your order (Misumi part no. & Quantity) together with your company details
to our Customer Service by fax or e-mail.
2. Our Customer Service will send you the quotation.
3. After confirmation of the price and delivery date, please send in the Official PO.
*For customers without credit terms, payment is to be made after PO confirmation.
Time of delivery stipulated in catalog might delay in case of stock shortage and/or required
Order received after 3pm will be treated as next working day order.
Warehouse is located at Tuas, Singapore.
Delivery
Singapore Malaysia Other Countries Destination
Non-stock Delivery as shownon each page
Stock 1 day + 2 days
Depends on yourcourier service
Express Delivery Fee
Kindly contact our customer service for the express delivery charges for your country.
The above conditions only applicable to Singapore area. Please contact our subsidiary in your country for details.
Changing or Canceling Orders
Changing or canceling orders (the Cancellation) is treated according to the shipment date and the timing when you make the cancellation. Cancellation charges will be imposed in some cases. Pleasecontact our subsidiary in your country for details.
•Items with logo
No cancellation is accepted.
•Items with 4 logo or logo shows longer days
Please refer to the table of the cancellation and shipment date below. Cancellation is acceptable with or without charges
(40% of product cost) depending on the timing of the cancellation.
Please contact our subsidiary in your country for details.
Returning and Replacing Goods•Item with logo can be returned. Administration charges applicable and customer is kindly request to contact our customer service prior making the return. Please note that the delivery cost of returning goods to the destination we determined must be paid by the customer.•Items with logo or logo shows longer days, cannot be returned as they have been manufactured-to-order.•When the received goods differ from the placed order, please contact our subsidiary for the replacement.
Please note that the above returning and replacing of goods are subjected to terms and conditions.
About Express Delivery ServicesThis system shortens the production time so that your order can be shipped out faster.
•To meet your urgent orders, we offer expedited services for many products. Our Express Delivery Services are available for the products marked with one of the symbols below. Depending on the specifi cations / dimensions of a product, the services may not be available. Before placing an order, please confi rm the service availability indicated on the product pages.
Special Emergency Service [Express T]
•[Express T] is a special emergency service that allows orders to be shipped out after 2business days of your order.
•Please note that this service might not be available depending on the order volume.
Reception Time of Emergency Service System [Express]
•Request for Express Services must be received before the following dead line. From 9:00 a.m. to 10:00 a.m. fo [Express T], by 3:00 p.m. for [Express A] and by 5:00 p.m. for [Express B and C]. Please note that orders placed after the above timings will be treated as next day orders.
Express T Express A Express B Express C
Emergency System
Orders Received By 10:00 a.m. By 3:00 p.m. By 5:00 p.m.
Shipped Out After 2 Business Days of Your Order After 3 Business Days of Your Order After 5 Business Days of Your Order After 7 Business Days of Your Order
Express T Express A Express B Express C
12
6
9 3
10AM
PM9
8
6
3
12
PM
12
3
6
9
5
•[Express T] orders must be placed by 10:00 a.m. Please use [Express A] (After 3 Business days of your order) after 10:00 a.m.
• Changes or cancellation after ordering of [Express T] will not be accepted. Changes or cancellation of Express A, B and C varies depending on the time.
•"Shipped out", "Shipment" denotes the required actual business days before the product is shipped.
• Please note that the actual delivery may vary depending on your location. Please consult your local Misumi offi ce for expected arrival dates.
Please note that above delivery days are subject to change depending on the order volume.
•Table of Cancellation and Shipment date
: Cancellation without charge. : 40% of product cost is imposed on the
cancellation.
: No cancellation is accepted.
Catalogue DeliverySchedule and
ServiceDays from the Day of Ordering
Day of Ordering
1 Days Later
2 Days Later
3 Days Later
5 Days Later
6 Days Later
7 Days Later
8 Days Later
4 Days Later
17 Days Later
13 Days Later
14 Days Later
15 Days Later
16 Days Later
12 Days Later
11 Days Later
10 Days Later
9 Days Later
21 Days Later
20 Days Later
22 Days Later
5 DaysCatalog Item
7 DaysCatalog Item Express CExpress BExpress A
12 DaysCatalog Item
9 DaysCatalog Item
8 DaysCatalog Item
14 DaysCatalog Item
18 DaysCatalog Item
22 DaysCatalog Item
6 DaysCatalog Item
Shipment Date
Shipment Date
Shipment Date
18 Days Later
19 Days Later
3 DaysCatalog Item
Shipment Date
4 DaysCatalog Item
Shipment Date
16 DaysCatalog Item Express T
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
Shipment Date
+ 2 days
iii
how to start business with misumi.ai 6/3/2011 5:41:42 PM
4mm(T4)
6mm(JIS)
4mm(T4)
6mm(JIS)
EHS-0.005
Catalog No.
0
EHSJ
EHSE
EHSJE-0.01-0.02
0-0.005N
D
P
R¯0.5
H
P-0.02-0.01
-0.3
0
T 0-0.02
0-5
L+5+0.1
-0
.02
0 EHSJ EHSJE
EHS EHSE
(D¯2 R¯0.3)
(L-N)
H
217
T
-0
.02
T
H
0-0.02
d
TC
0
HCC
0
21 3
H
T
d
H -0
.3HC
0
T d R4 2 36 3 5
T d R1
4 25
6 3
3
EHS
EHSE
EHSJ
EHSJE
NL
P
SK
C
-0.1SKC0
RK
C
RKC -0.10
DKC
DK
C
DKC0
-0.1
KAC -0.1KBC0
WKC0
-0.1
KC -0.10
120B
120B-0.1
120B
KTC0
Ú0.5
0BKGC
AGB 0
-0.1
KGC
3
4
6
4
5
6
8
9
EHSJ
EHSJE
(P )EHS-0.005
0
(P )
EHSE-0.01-0.02
(P )-0.0050
(P )-0.01-0.02
+0.1
Catalog No.LType D
P NH T
1.5
1
2
2.5
3
4
4.5
5
60100
60
100150100150200150200150200150200250150200250150200250
20
20
35
35
100
100
100
100100
100100
100100
125
125
125
80
80
80
90
90
90
90
60
60
6070
7070707070707070
7070
7070
40
40
4040
50
50505050
50
50
50
50
50
(0.4)(0.4)
(0.5)(0.5)(0.5)
0.6 0.8
0.8
0.8
1.0
1.0
1.0
1.0
0.90.9
0.9
0.9
0.6 0.80.70.7
0.7
1.01.21.2
1.2
1.2
1.2
1.3
1.3
1.3
1.1
1.1
1.1
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.4
1.4
1.4
1.8
1.8
1.8
2.0
2.0
2.0
2.0
2.1
2.1 2.2
1.9
1.9 2.5
2.5
2.5
2.42.3 2.6
3.0
3.0
(0.3)(0.3)
(0.4)(0.5)0.6 0.80.7(0.3)
150EHS 2
Catalog No. L
1.0
P
70
N
200EHSE 2.5 P1.5 N70
EHS
EHSEEHSJEHSJE
P.i5
Catalog No.
EHS 2 150
L
1.0
P
70
N (KCCWKCEetc)
RKC1
NC
NHC
Code
TC
HCC
Alterations Spec.
NHN
NCW
HC
Type DP L
1
1.5
2.5
2
3
Catalog No.
0.30.40.5
0.7~1.8
0.8~2.1
1.0~2.6
0.30.40.5
0.6~0.8
0.6~1.2
60100
60100150100150100150200150200150200
Type DP L
4
5
4.5
Catalog No.
2.0~3.0
2.0 2.5
3.0
150200250150200250150200250
Price PriceSpec.CodeAlterations
SKC
RKC
DKC
KBCKAC
WKC
KC
KTC
KGC
5
VWC0
-0.02
VKC -0.020
VWC
VKC
High Speed SteelSKH51
-STANDARD TYPE-STEPPED EJECTOR PINS
Step radius(R)
PHead Thickness
Range of guaranteed base material hardness
58~60HRC
SKH51
The figures in( )for P dimensions are applicable for EHS only.
Note that alphabetical characters(P.N)are
not necessary in ordering EHS.
Express
Express AT
Days
Days3
Standard type
Delivery
Order
Alterations
Days Express services not available for NHCCNHNExpress TCA
Single flat cutting
(precision)D/2¯VKC<H/2
Two parallel flats cutting
(precision)D/2¯VWC<H/2
Single flat cutting
D/2¯KC<H/2
Two flats cutting
D/2¯WKC<H/2
Two flats(right angled)cutting
D/2¯RKC<H/2
Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments only
KAC<KBC<H/2
Four flats cutting
D/2¯SKC<H/2
Three flats cutting
D/2¯DKC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2AG=1Bincrements0<AG<360
Three flats cutting
at 120B
D/2¯KTC<H/2
(1)To align the key
flat with the shaft
diameter
Unit of designation
0.05mm increments possible
(2)To designate
arbitrary key
flat dimensions
Unit of designation 0.1mm
IQuantity discount rate
-Quantity
Rate1~49 50~100
5%
U/Price U/Price1~49 1~49
About DesignationUnit for Key Flat Cutting
TC=0.1mm increments T/2¯TC<T,D˘1.5
Dimensions L and N become shorter by(T-TC).
HC=0.1mm increments
D+1¯HC<H,D˘1.5
HCC=0.1mm increments
D+1¯HCC<H-0.3,D˘1.5
Dowel hole boring
Available when H˘4
Combination with other
than NHC/NHN not available.
Dowel hole boring+Spring pin driving
Available when H˘4
Combination with other
than NHC/NHN not available.
Automatic sequential numbering on the head
Combination with SKC not available.
Numbering on the head
Combination with SKC not available.
rr
1
109
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
iviii
MSWT
B
16
1
L
D
R(PT)MSWTS
MSWT
MSWTS
HOW TO USE CATALOG
KSelect blue characters one by
one from the left to find order
symbols.
KDimensions unnecessary to specify
for order symbols are covered
with blue mesh.
KPrinted in red means Stock
KOrder example
Dimension Table
How to Order
Product Name
Catalog No.
Materials and others
Photograph
Drawing
Page number
Days to ship
Use the Contents page to find the products by
production name and page number.
How to find the product
¡
CAD data
Two-dimensional CAD data(in DXF and
IGES formats)is available for some
products in this catalog. Download the
files from the MISUMI's website.
MISUMI SOUTH EAST ASIA
http://sg.misumi-ec.com/contents/cad/
MISUMI MALAYSIA
http://my.misumi-ec.com/contents/cad/
JIS notation
Thread JIS B 0203
tapered thread for tubing R(PT)*The thread on MSWT No.S is
ANSI B2.2 tapered thread for
American tubing(NPT).
(Tapered type, stainless steel)(Tapered type)
S45C
SUSXM7
32~42HRC
Black Oxide
a:Standard diameter position
KThe indication of JIS standard on the page of each commodity is for reference only and does not signify on-spec
product.
1812 Days10 Days 14 Days8 Days Days
KThe number of days(business days following the day of your order)required before shipping from MISUMI's distribution center in Singapore. P.i
5 Days 7 DaysDays3
Express A BExpress Express CTExpress
KExpress delivery services P.i
Volume discount is also
applicable to alteration fees.
KSelect alterations
with code.
Alteration
KPrices are to be quoted.
KVolume discount rates are available
for most products.
Price
iii-iv-mold.ai 6/2/2011 9:38:55 AM
: Additional sizes/New stock items : Existing stock itemsm Existinms :Contents
PARTING LOCK BUSHINGS .............................................................................................................. 100
PARTING LOCKS .................................................................................................................................. 101
GUIDE FOR PARTING LOCK SETS .................................................................................................... 103
METHOD OF INSTALLING THE PARTING LOCK SET/EXAMPLE OF PLSW OPERATION............... 104
PARTING LOCK SETS ........................................................................................................................ 105
ROLLER LOCK SETS ........................................................................................................................ 109
MAGNET LOCK SETS ........................................................................................................................ 113
TENSION LINKS .................................................................................................................................. 117
SPECIAL BOLTS FOR TENSION LINK/TENSION LINK RETAINERS ............................................. 118
MOLD OPENING PREVENTION PLATES .......................................................................................... 119
GUIDE FOR COOLING COUPLERS .................................................................................................... 121
MOLD COUPLERS ............................................................................................................................. 125
HIGH COUPLERS FOR COOLING PIPE .......................................................................................... 127
DOUBLE VALVES SP COUPLERS FOR COOLING ........................................................................... 130
COUPLERS FOR COOLING WATER.................................................................................................... 131
HOSE NIPPLES .................................................................................................................................. 133
HOSE NIPPLES/L-SHAPED HOSE NIPPLES ..................................................................................... 134
QUICK-FITTING JOINTS FOR MOLD COOLING ................................................................................ 135
COOLING JOINT PLUGS ................................................................................................................... 140
COOLING JOINTS ............................................................................................................................. 141
COOLING PIPES .................................................................................................................................. 142
BAFFLE BOARDS.................................................................................................................................. 145
GUIDE FOR HEAT TRANSACTION PIPES .......................................................................................... 147
HEAT TRANSACTION PIPES/GREASE FOR HEAT TRANSACTION PIPE ........................................ 148
COOLING CIRCUIT PLUGS .............................................................................................................. 149
SCREW PLUGS WITH O-RINGS/TAPERED SCREW PLUGS/SEALING TAPE .............................. 150
O-RINGS ............................................................................................................................................ 151
THERMOCOUPLES ............................................................................................................................. 153
SHOT COUNTERS FOR MOLD ......................................................................................................... 154
SCREW PLUGS .................................................................................................................................. 155
WASHERS/SPACERS ........................................................................................................................ 157
DOWEL PINS ....................................................................................................................................... 159
SOCKET HEAD CAP SCREWS ......................................................................................................... 161
DISTANCE SPACERS ........................................................................................................................ 162
GUIDE FOR COIL SPRINGS .............................................................................................................. 163
(TECHNICAL DATA) INSTRUCTIONS AND NOTES FOR COIL SPRINGS ........................................ 165
WIRE SPRINGS .................................................................................................................................. 166
COIL SPRINGS .................................................................................................................................. 173
GATE-CUT SPRINGS/WASHERS FOR COIL SPRINGS...................................................................... 191
Tooling Map ....................................................................................................................................... 193
Registration Form ............................................................................................................................. 198
How to start business with Misumi ................................................................................................................... i
How to use catalog ....................................................................................................................................... iii
STRAIGHT EJECTOR PINS ................................................................................................................... 1
STEPPED EJECTOR PINS ........................................................................................................................ 9
RECTANGULAR EJECTOR PINS ......................................................................................................... 13
STRAIGHT EJECTOR SLEEVES ......................................................................................................... 15
CORE PIN BLANKS ............................................................................................................................. 23
ANGULAR PINS .................................................................................................................................. 25
BALL PLUNGERS/BALL BUTTONS/BALL PLUNGER WRENCHES .................................................. 31
BALL PLUNGERS(CAP TYPE).............................................................................................................. 32
SLIDE LOCKS ....................................................................................................................................... 33
BALL PLUNGERS(PLAIN TYPE, HEAD TYPE) ................................................................................ 34
GUIDE FOR OIL-FREE SLIDE UNITS FOR LOOSE CORE ................................................................. 35
OIL-FREE SLIDE UNITS FOR LOOSE CORE ..................................................................................... 37
INCLINED PINS · DIRECT PUSH-UP PINS .......................................................................................... 39
INCLINED PIN LEADER OIL-FREE BUSHINGS- ................................................................................ 45
OIL-FREE SLIDE BLOCKS FOR BLOCK LOOSE CORE ................................................................. 46
SPRUE BUSHINGS ............................................................................................................................. 47
LOCATING RINGS ............................................................................................................................. 51
RUNNER LOCK PINS ........................................................................................................................ 53
RUNNER CHANGE PINS ................................................................................................................... 57
PIN-POINT GATE BUSHINGS .............................................................................................................. 59
PIN-POINT GATE BUSHINGS WITH HEAD.......................................................................................... 63
UNDERSIZED TAPPING ELECTRODES .......................................................................................... 65
ELECTRODES FOR ENGRAVING .................................................................................................... 66
PRECISION LEADER PINS................................................................................................................... 67
PRECISION LEADER BUSHINGS .................................................................................................... 69
LEADERS BUSHINGS ........................................................................................................................ 71
TAPERED PIN SETS ............................................................................................................................. 75
POSITIONING STRAIGHT PIN SETS ............................................................................................... 80
TAPERED BLOCK SETS ................................................................................................................... 83
PRECISION EJECTOR LEADER PINS ............................................................................................... 85
EJECTOR LEADER BUSHINGS ......................................................................................................... 87
BALL RETAINERS ............................................................................................................................. 90
EJECTOR LEADER BUSHINGS(LINEAR GUIDE TYPE · SHORT TYPE) ........................................ 91
EJECTOR RODS WITH SPRING WASHER ..................................................................................... 92
EJECTOR PLATE RETURN DETECTION SWITCHES ...................................................................... 93
STOP BOLTS ....................................................................................................................................... 95
PULLER BOLTS .................................................................................................................................. 97
PRECISION SHOULDER BOLTS/URETHANE WASHERS ................................................................. 99
21
¡ EPH EPHE-B ¡ Printed in Blue
syaD3
Printed in Red
¡ EPH EPHE-B ¡ Pr
Printed SGP StockSGP Stock
H
T=4
x1
L+5+0.1
0-
0.3
0-0.02
R¯0.5(P¯2 R¯0.3)
EPH
P0
-0.005 P -0.02-0.01
EPHE-B
-0
4mm(T4)
Catalog No.
0.005
-0.02-0.01
TC3.0150EPH 2.5
(KCCWKCEetc)
NHC
HCC
HC
Catalog No. L
217
H -0
.02
HCC
0
H -0
.3HC
0
NHN21 3
Catalog No.Type P L60 L100 L150 L200 L250 L300
0.20.30.40.50.6 0.70.8 0.91 1.11.2 1.3 1.41.51.61.7 1.8 1.922.12.2 2.3 2.42.52.62.7 2.8 2.933.13.2 3.3 3.43.53.63.7 3.8 3.9
TC
NC
-0.02
4TC
0
4
2
H
+0.10
3
NCW
NCS
5
H
4
2
L350
Catalog No.
Stocks Availability Subjected to Prior Sales.
Type P L100 L150 L200 L250 L300 L350
11.1
L
P
4
3
2
4
5
7
6
8
9
10
11
15
17
14
Catalog No.H T
PL
606060 100
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150
200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200
250250
250250
250250
250250
250250
250250
250250
250250250250250250250250250250250250250250250250250250250250250
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
350
350
350
350
350
350
350
350
350
350
350
350
350
Price PriceSpec.CodeAlterations
SK
C
-0.1SKC0 SKC
RK
C
RKC -0.10 RKC
DKC
DKCDK
C
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC -0.10 KC
VWC0
-0.02
VWC
VKC -0.020 VKC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
Spec.CodeAlterations
5
150
L
EPH 1.5
Catalog No.
EPHEPHE-B
EPHEPHE-B
EPH
EPHE-B
Type
(P )
(P )-0.0050
-0.02-0.01
EPH
EPHE-B
44.14.24.54.64.7
55.15.55.6
66.16.56.6
77.17.57.6
88.18.5
99.19.510
10.110.511.5
12
4.3
4.8
8.6
9.6
10.611.6
4.4
4.9
11
5
H
4
25
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
--
----
------
--------
-----------
------------
---
-
- ----
- ----
- --
-- - -
-
-
-
- -
--
-
-
-
-
---
--
--
---
- -
--
-
-
-
-
---
--
--
---
-
Selection
— STANDARD —STRAIGHT EJECTOR PINS
Head Thickness
b1(Range of guaranteed shaft diameter precision)
High Speed SteelSKH51
4mm head
EPHCEPHE-B(when P=0.2)is applied with
overall quenching(its head without annealing).
P
Please take the order for head JIS type EPHJ(P )/ EPHJE (P ).0.000-0.005
-0.01-0.02
P dimension with*mark
Express services not available for NHCCNHNDays Express TCA
Days
Four flats cutting
P/2¯SKC<H/2
Two flats(right angled)cutting
P/2¯RKC<H/2
Three flats cutting
P/2¯DKC<H/2
Varied width parallel flats cuttingP/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2
Two flats cutting
P/2¯WKC<H/2
Single flat cutting
P/2¯KC<H/2
Precision two flats cutting
P/2¯VWC<H/2
Precision single flat cutting
P/2¯VKC<H/2
Three flats cutting
at 120BP/2¯KTC<H/2
Two flats(angled)cutting
P/2¯KGC<H/2AG=1Bincrements0<AG<360
About Designation Unit for Key Flat Cutting
(2)To designate arbitrary key flat dimensions
Unit of designation 0.1mm
(1)To align the key flat with the shaft diameter
Unit of designation
0.05mm increments possible
HCC=0.1mm increments
P+1¯HCC<H-0.3, P˘1.5
HC=0.1mm increments
P+1¯HC<H, P˘1.5
TC=0.1mm increments
2.0¯TC<4, P˘1.5
Dimension L becomes shorter by(4-TC)
Dowel hole boring
Combination with other than NHCCNHN not available.Available when H˘4
Combination with other than NHCCNHN not available.Available when H˘4
Combination with SKC not available.
Numbering on the head
Available when H˘2
Combination with other than NHCCNHN not available.Available when H˘4
Dowel hole boring+Spring pin driving
Combination with SKC not available.
Automatic sequential numbering on the head
Available when H˘2
U/Price for 1~49
U/Price for 1~49
DeliveryOrder
Alterations
Express
Express AT
IQuantity discount rateQuantity
Rate - 5%50~1001~49
Standard type
Dowel hole boring+Dowel pin driving
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
Quo
tation
Quo
tation
Quotation Quotation
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
When*is indicated for P dimension, production time is 3 business days.
1.3
*11.1
1.4
0.20.30.40.60.8
11.51.61.7
22.12.22.52.62.7
33.13.23.53.63.7
44.1
*4.24.54.6
*4.75
5.15.55.6
6 6.1 6.5 6.6
7 7.1
*7.58
8.1*8.5
9*9.1
1010.1
*10.5*11.5
12
0.50.70.91.1
1.8
2.3
2.8
3.3
3.8
*4.3
*4.8
*7.6
*8.6
*9.5
*10.6*11.6
1.2
1.9
2.4
2.9
3.4
3.9
*4.4
*4.9
*9.6
*11
Range of guaranteed shaft diameter precision
T4 x1 max.30
Range of guaranteed base material hardness
SKH51
58~60HRC
001-002.ai 5/28/2011 1:54:53 PM
H
T
x1
L+5+0.1
0-
0.3
0-0.02
R¯0.5
EPHJ
P0
-0.005 P -0.02-0.01
EPHJE
-0
6C8mm(JIS)
Catalog No.
0.005
-0.02-0.01
TC3.0200EPHJ4
(KCCWKCEetc)
NHC
HCC
HC
Catalog No. L
217
H -0
.02
HCC
0
H -0
.3HC
0
NHN21 3
TC
NC
-0.02
T
TC 0
T
d
H
+0.10
NCW
NCS
H
T
d
MCMx1
MC
Catalog No.
Type P L100 L150 L200 L250 L300 L350
4
4.5
5
5.5
6
6.5
7
8
9
10
12 -
L
P
6
8
11
10
9
8
13
14
15
17
Catalog No.
TypeH T
P
4
4.5
5
5.5
6
6.5
7
8
9
10
12
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
250
300
300
300
300
300
300
300
300
300
300
300
350
350
350
350
350
350
350
350
350
Spec.CodeAlterations
5 P.i
200
L
EPHJ4
Catalog No.
EPHJEPHJE
EPHJ
EPHJE
(P )
(P )
-0.0050
-0.02-0.01
EPHJ
EPHJE
Price PriceSpec.CodeAlterations
SK
C
-0.1SKC0 SKC
RK
C
RKC -0.10 RKC
DKC
DKCDK
C
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC -0.10 KC
VWC0
-0.02
VWC
VKC -0.020 VKC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
P.i5
H
T
d
-
-
— STANDARD —STRAIGHT EJECTOR PINS
High Speed SteelSKH51
JIS head
Head Thickness
b1(Range of guaranteed shaft diameter precision)
P
LSelection
For JIS head type less than P4 is T=4, please place the order for 4mm head type of EPH(P )/ EPHE-B(P ). -0.01-0.02
0.000-0.005
Standard type
The volume discount rate is also applicable to alteration cost.
Days
Delivery
Order
Alterations
Days
Express services not available for NHCCNHNCMCExpress TCA
Express
Express AT
Varied width parallel flats cuttingP/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2
Two flats cutting
P/2¯WKC<H/2
Single flat cutting
P/2¯KC<H/2
Precision single flat cutting
P/2¯VKC<H/2
Precision two flats cutting
P/2¯VWC<H/2
Four flats cutting
P/2¯SKC<H/2
Two flats(right angled)cutting
P/2¯RKC<H/2
Three flats cutting
P/2¯DKC<H/2
Three flats cutting
at 120BP/2¯KTC<H/2
Two flats(angled)cutting
P/2¯KGC<H/2AG=1Bincrements0<AG<360
About DesignationUnit for Key Flat Cutting
(1)To align the key flat with the shaft diameter
Unit of designation
0.05mm increments possible
(2)To designate arbitrary key flat dimensions
0.1mmUnit of designation
HCC=0.1mm increments
P+1¯HCC<H-0.3
HC=0.1mm increments
P+1¯HC<H
TC=0.1mm increments
T/2¯TC<T
Dimension L becomes shorter by(T-TC).
Dowel hole boringCombination with otherthan NHCCNHN not available.
Dowel hole boring+Dowel pin driving
Combination with otherthan NHCCNHN not available.
Combination with otherthan NHCCNHN not available.
Dowel hole boring+Spring pin driving
68
T
3 5
d r
68
T
3
d
5
r1
68
T
3
d
5
r2
Combination with SKC not available.
Combination with SKC not available.
Head tapping
Combination with any other alteration not available.
Available when P˘8
Numbering on the head
Automatic sequential numbering on the head
108C9
PM4M5
12 M6
M
IQuantity discount rateQuantity
Rate - 5%50~1001~49
U/Price for 1~49
rr
1r
2
43
All price & lead time are to be quoted.
Quo
tation
Quo
tation
Quotation
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
Range of guaranteed shaft diameter precision
Range of guaranteed base material hardness
SKH51
58~60HRC
JIS x1 max.35
003-004.ai 5/28/2011 1:55:02 PM
EPH-LEPY-L
P0
-0.005 P -0.02-0.01
EPHE-L
4mm(T4)
Catalog No.
0-0.005
-0.02-0.01
H
T=4
x1
0-
0.3
0-0.02
R¯0.5(P¯2 R¯0.3)
L (L>200 L )+0.020
+0.050
G1.0
L
P
TC3210.00EPH-L5
(KCCWKCEetc)Catalog No. L 5 P.i
P.i
210.00
L
EPH-L5
Catalog No. 5
HCC
TC
NC
NHC
TMC
GVC
-0
.02
0HC
C
H
-0.02
4TC
0
4
2
H
+0.10
3
217
S
B
t
NCW
NCS
5
H
4
2
NHN21 3
L 0.2GL
Spec.CodeAlterations
Catalog No.Type
H T
2 4
P0.30.40.50.60.70.80.91
20.00~60.00
Catalog No.
TypeH T
P
0.30.40.5
0.6 0.70.8 0.9
1 1.1 1.2 1.3 1.4
1.51.6
1.7 1.8 1.92
2.12.2 2.3 2.4
2.52.6
2.7 2.8 2.93
3.13.2 3.3 3.4
3.53.6
3.7 3.8 3.94
4.14.2 4.3 4.4
4.54.6
4.7 4.8 4.95
5.15.55.66
6.16.56.67
7.17.57.68
8.18.5 8.6
99.1
9.5 9.610
10.110.5 10.611 11.1
11.5 11.612
L
L40.00~100.00
L100.01~150.00
L150.01~200.00
L200.01~250.00
L250.01~300.00
L300.01~350.00
3
4
4
5
7
6
8
9
10
11
15
17
14
60.00
100.00
150.00
200.00
250.00
200.00300.00250.00200.00300.00250.00200.00350.00250.00200.00350.00250.00200.00350.00250.00200.00350.00250.00200.00350.00250.00350.00250.00350.00250.00350.00250.00350.00
250.00
350.00
250.00
350.00
250.00
350.00
250.00
350.00
40.00
Lmin. Lmax.
L
EPY-LEPH-L
EPHE-L
EPY-L
(P )-0.005 0
(P )-0.02-0.01
EPH-L
EPHE-L
Price PriceSpec.CodeAlterations
VWCVWC
VKC -0.020
-0.020
VKC
SK
C
-0.1SKC0 SKC
RK
C
RKC-0.10 RKC
DKC
DKCDK
C
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC-0.10 KC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
0HC
H -0
.3
HC
H
4
25
---
-----
-------
----------
----------------
-
---
---
---
--
---
--
---
--
---
--
- -
- -
- -
- -
---
---
--
--
--
--
----
----
— L DIMENSION DESIGNATION TYPE —STRAIGHT EJECTOR PINS
b1(Range of guaranteed shaft diameter precision)
EPY-L is applied with overall quenching(its
head without annealing)
Head Thickness
Express services not available for NHCCNHNCTMCDays Express TCA
P
Four flats cutting
P/2¯SKC<H/2
Two flats(right angled)cutting
P/2¯RKC<H/2
Three flats cutting
P/2¯DKC<H/2
Varied width parallel flats cuttingP/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2
Two flats cutting
P/2¯WKC<H/2
Single flat cutting
P/2¯KC<H/2
Precision two flats cutting
P/2¯VWC<H/2
Precision single flat cutting
P/2¯VKC<H/2
Three flats cutting
at 120BP/2¯KTC<H/2
Two flats(angled)cuttingP/2¯KGC<H/2AG=1Bincrements0<AG<360
HC=0.1mm increments
P+1¯HC<H, P˘1.5
HCC=0.1mm increments
P+1¯HCC<H-0.3, P˘1.5
(Dimension L remains unchanged.)2.0¯TC<4, P˘1.5
TC=0.1mm increments
Numbering on the head
Combination with SKC not available.
Lapping on the tip face
Available when P˘0.6
EPY-L not available.
S,B=1mm increments
2¯S¯10, S+5¯B¯30
Available when P˘3
Dowel hole boring
Available when H˘4
4-TC¯Lmax.-L
Available when H˘2
Numbering on the head
Combination with SKC not available.Available when H˘2
Combination with other than NHCCNHNCTMCCGVC not available.
Dowel hole boring+Dowel pin driving
Available when H˘4
Combination with other than NHCCNHNCTMCCGVC not available.
Combination with other than NHCCNHNCTMCCGVC not available.
Available when H˘4
Dowel hole boring+Spring pin driving
Please take the order for JIS head type EPHJ-L(P )/ EPHJE-L(P ).0.000-0.005
-0.01-0.02
When the ejector pin's dimension L is less than 40mm, the length of b1(guaranteed shaft diameter precision range)may be too short for your particular application. For such application, use EPY-L or core pins instead.
L dimension designation type
0.01mm increments U/Price for 1~4
U/Price1~40.01mm increments
High Speed SteelSKH51
4mm head
DeliveryOrder
Alterations
About DesignationUnit for Key Flat Cutting
(2)To designate arbitrary key flat dimensions
Unit of designation 0.1mm
(1)To align the key flat with the shaft diameter
Unit of designation
0.05mm increments possible
DaysExpress
Express AT
IQuantity discount rateQuantity
Rate - 5% 10%13~495~121~4
20%50~100
65
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
Range of guaranteed shaft diameter precision
EPY-L x1 max.10
T4 x1 max.30
Range of guaranteed base material hardness
SKH51
58~60HRC
005-006.ai 5/28/2011 1:55:12 PM
NCEPN 16 500
NC
NHC
HC
TC
217
H
T
+0.10d
r
H
HC0
T
TC
NCW
NCS
r1
H
T
d
NHN21 3
(KCCWKCEetc)LCatalog No.
5 P.i
Price PriceSpec.CodeAlterations
SK
C
SKC0 SKC
RK
C
RKC0 RKC
DKC
DKCDK
C
DKC0
KAC KBC0
KBCKAC
WKC0
WKC
KC0 KC
KTCKTC
0
KGCKGC
0
KGC
Spec.CodeAlterations
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
Ú0.5AGB
120B
120B
-0.1
120B
0B -0.1
-0
.3
PT
Catalog No.
EPN
EPJ L˘6006C8mm(JIS)
4mm(T4)L¯500
L P
-0.01-0.02-0.01-0.03
-0.01-0.03-0.01-0.03
-0.01-0.04-0.01-0.05
1~13 15~20 250
-0.02
0-0.05
X1
H0
-0
.3
L+5+0.1
R¯0.5(P¯2 R¯0.3)
1.3
1.9
2.4
2.9
3.4
3.9
(4.4)
(4.9)
(5.4)
(5.9)
(6.4)
1.2
1.8
2.3
2.8
3.3
3.8
(4.3)
(4.8)
(5.3)
(5.8)
(6.3)
11.51.62
2.12.52.63
3.13.53.64
(4.1)4.5
(4.6)5
(5.1)5.5
(5.6)6
(6.1)6.578
1012
(13)15162025
1.1
1.7
2.2
2.7
3.2
3.7
(4.2)
(4.7)
(5.2)
(5.7)
(6.2)
3
4
5
7
4
6
8
9
10
11
15
17
20
21 2125
20
1517
8
9
10
11
13
8
6
30
EPN
EPJ
18 18
Catalog No.
H T H T P
100100100100100100100100100100100100
100
100
100
100
100100100100100100100100
* *
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
1.4 150150150150150150150150150150150150
150
150
150
150
150150150150150150150150150
200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200
250250250250250250250250250
250
250
250
250
250250250250250250250250250
300300300300300300300300300300300300300300300300300300300300300300300300300300300300
350
350
350350350350350
350
350
350
350
350350350350350350350350
400
400
400400400400400400400400400400400400400400400400400400400400400400400400
450
450
(450)(450)(450)
(450)
500
500
(500)
(500)
500
500
500
500500500500500500500500500500
(600)
(600)
(600)(600)(600)(600)(600)
(600)(600)
600600
(700)
(700)(700)(700)(700)(700)
(700)(700)
700700
(800)(800)(800)(800)
(800)(800)
800800
(900)(900)(900)(900)
(900)(900)(900)
900900
(1000)(1000)(1000)(1000)
(1000)(1000)(1000)
10001000
EPN 3 100
Catalog No. L
- - -
- - -
5 P.i
Type
***
*
L
P
PCatalog No.
Type L100 L150 L200 L250 L300 L350 L400 L450 L500 L600 L700 L800 L900 L1000
EPN
EPN
EPJ
EPJ
11.21.51.62
2.12.52.63
3.13.53.64
4.14.54.65
5.15.55.66
6.16.578
10121315162025
1.11.3
1.7
2.2
2.7
3.2
3.7
4.2
4.7
5.2
5.7
6.2
1.4
1.8
2.3
2.8
3.3
3.8
4.3
4.8
5.3
5.8
6.3
1.9
2.4
2.9
3.4
3.9
4.4
4.9
5.4
5.9
6.4
- - - - - --
--
----
-
-
-
-
-
-
----
----
---------------- --- -
-
-----------------------
-
-----------------------
-
-----------------------
- L600~1000L100~500
r2
H
T
d
-
-
-
-
-
-
----
--
-
-
-
-
-
-
- -
-
--------
-
-------------
-
---
--------
-
-
-
-
-
-
-
--------------------
-
-
-STANDARD-STRAIGHT EJECTOR PINS
Dies SteelSKD61+
Nitrided
b1(Range of guaranteed shaft diameter precision)
PHead Thickness T
4mm head JIS head
4mm head JIS head
LSelection
The P dimension enclosed in brackets( )is applicable only for EPN.The L dimension enclosed in brackets( )is applicable only for EPJ. If the P dimension of EPN or the L dimension of EPJ bears the *mark,it means that the product concerned will be dispatched on the third day.
Order
Delivery Days
EPN(P dimension with*mark) EPJ(L dimension with*mark)Express TExpress A
Standard type
Alterations
Days Express T Express AExpress services not available for NHCCNHN
About DesignationUnit for Key Flat Cutting
(2)To designate arbitrary key flat dimensions
Unit of designation 0.1mm
(1)To align the key flat with the shaft diameter
Unit of designation
0.05mm increments possible
Two flats cutting
P/2¯WKC<H/2
Single flat cutting
P/2¯KC<H/2
Two flats(right angled)cutting
P/2¯RKC<H/2
Varied width parallel flats cutting
P/2¯KAC<H/2
KBC=0.1mm increments only
KAC<KBC<H/2
Four flats cutting
P/2¯SKC<H/2
Three flats cutting
P/2¯DKC<H/2
Three flats cutting
at 120BP/2¯KTC<H/2
Two flats(angled)cutting
P/2¯KGC<H/2
AG=1Bincrements
0<AG<360
HC=0.1mm increments
P+1¯HC<H, P˘1.5
TC=0.1mm increments
T/2¯TC<T, P˘1.5
Dimension L becomes shorter (T-TC).
4 2 368
3 5
T d
68
4T
3
2d
5
r
r1
Dowel hole boringAvailable when H˘4Combination with other thanNHCCNHN not available.
Combination with other thanNHCCNHN not available.
Available when H˘4
Dowel hole boring+Spring pin driving
68
4T
3
2d
5
r2
Combination with other thanNHCCNHN not available.
Available when H˘4
Dowel hole boring+Dowel pin driving
Numbering on the head Combination with SKC not available.
Numbering on the headCombination with SKC not available.
IQuantity discount rateQuantity
Rate - 5%50~1001~49
U/Price for 1~49
87For area out of Singapore please refer to P.i.
Days3
Stocks Availability Subjected to Prior Sales.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i .
Range of guaranteed shaft diameter precision
T4 x1 max.30
JIS x1 max.35
Range of guaranteed base material hardness Range of guaranteed surface hardness for nitriding
SKD61+Nitrided
Surface:900HV~Base Materials:40~45HRC
¡ Printed in Red
SGP StockSGP StockPrinted in Red
007-008.ai 5/28/2011 1:55:21 PM
4mm(T4)
6mm(JIS)
4mm(T4)
6mm(JIS)
EHS-0.005
Catalog No.
0
EHSJ
EHSE
EHSJE-0.01-0.02
0-0.005N
D
P
R¯0.5
H
P-0.02-0.01
-0
.3
0
T 0-0.02
0-5
L+5+0.1
-0
.02
0 EHSJ EHSJEEHS EHSE
(D¯2 R¯0.3)
(L-N)
H
217
T
-0
.02
T
H
0-0.02
d
TC
0
HCC
0
21 3
H
T
d
H -0
.3HC
0
T d R4 2 36 3 5
T d R1
4 25
6 3
3
EHS
EHSE
EHSJ
EHSJE
NL
P
SK
C
-0.1SKC0
RK
C
RKC -0.10
DKC
DK
C
DKC0
-0.1
KAC -0.1KBC0
WKC0
-0.1
KC -0.10
120B
120B-0.1
120B
KTC0
Ú0.5
0BKGC
AGB 0
-0.1
KGC
3
4
6
4
5
6
8
9
EHSJ
EHSJE
(P )EHS-0.005
0
(P )
EHSE-0.01-0.02
(P )-0.0050
(P )-0.01-0.02
+0.1
Catalog No.LType D
P NH T
1.5
1
2
2.5
3
4
4.5
5
60100
60
100150100150200150200150200150200250150200250150200250
20
20
35
35
100
100
100
100100
100100
100100
125
125
125
80
80
80
90
90
90
90
60
60
6070
7070707070707070
7070
7070
40
40
4040
50
50505050
50
50
50
50
50
(0.4)(0.4)
(0.5)(0.5)(0.5)
0.6 0.8
0.8
0.8
1.0
1.0
1.0
1.0
0.90.9
0.9
0.9
0.6 0.80.70.7
0.7
1.01.21.2
1.2
1.2
1.2
1.3
1.3
1.3
1.1
1.1
1.1
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.4
1.4
1.4
1.8
1.8
1.8
2.0
2.0
2.0
2.0
2.1
2.1 2.2
1.9
1.9 2.5
2.5
2.5
2.42.3 2.6
3.0
3.0
(0.3)(0.3)
(0.4)(0.5)0.6 0.80.7(0.3)
150EHS 2
Catalog No. L
1.0
P
70
N
200EHSE 2.5 P1.5 N70
EHS
EHSEEHSJEHSJE
P.i5
Catalog No.
EHS 2 150
L
1.0
P
70
N (KCCWKCEetc)
RKC1
NC
NHC
Code
TC
HCC
Alterations Spec.
NHN
NCW
HC
Type DP L
1
1.5
2.5
2
3
Catalog No.
0.30.40.5
0.7~1.8
0.8~2.1
1.0~2.6
0.30.40.5
0.6~0.8
0.6~1.2
60100
60100150100150100150200150200150200
Type DP L
4
5
4.5
Catalog No.
2.0~3.0
2.0 2.5
3.0
150200250150200250150200250
Price PriceSpec.CodeAlterations
SKC
RKC
DKC
KBCKAC
WKC
KC
KTC
KGC
5
VWC0
-0.02
VKC -0.020
VWC
VKC
High Speed SteelSKH51
-STANDARD TYPE-STEPPED EJECTOR PINS
Step radius(R)
PHead Thickness
Range of guaranteed base material hardness
58~60HRC
SKH51
The figures in( )for P dimensions are applicable for EHS only.
Note that alphabetical characters(P.N)are
not necessary in ordering EHS.
Express
Express AT
Days
Days3
Standard type
Delivery
Order
Alterations
Days Express services not available for NHCCNHNExpress TCA
Single flat cutting
(precision)D/2¯VKC<H/2
Two parallel flats cutting
(precision)D/2¯VWC<H/2
Single flat cutting
D/2¯KC<H/2
Two flats cutting
D/2¯WKC<H/2
Two flats(right angled)cutting
D/2¯RKC<H/2
Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments only
KAC<KBC<H/2
Four flats cutting
D/2¯SKC<H/2
Three flats cutting
D/2¯DKC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2AG=1Bincrements0<AG<360
Three flats cutting
at 120B
D/2¯KTC<H/2
(1)To align the key
flat with the shaft
diameter
Unit of designation
0.05mm increments possible
(2)To designate
arbitrary key
flat dimensions
Unit of designation 0.1mm
IQuantity discount rate
-Quantity
Rate1~49 50~100
5%
U/Price U/Price1~49 1~49
About DesignationUnit for Key Flat Cutting
TC=0.1mm increments T/2¯TC<T,D˘1.5
Dimensions L and N become shorter by(T-TC).
HC=0.1mm increments
D+1¯HC<H,D˘1.5
HCC=0.1mm increments
D+1¯HCC<H-0.3,D˘1.5
Dowel hole boring
Available when H˘4
Combination with other
than NHC/NHN not available.
Dowel hole boring+Spring pin driving
Available when H˘4
Combination with other
than NHC/NHN not available.
Automatic sequential numbering on the head
Combination with SKC not available.
Numbering on the head
Combination with SKC not available.
rr
1
109
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
009-010.ai 5/28/2011 1:55:33 PM
PN
L
N
DR¯0.5
(L>200L
H-
0.3
0
T 0-0.02
0-5
+0.02 0
-0
.02
0(D¯2 R¯0.3)
(L-N)
L ) 0+0.05
G1.0
EHSJL EHSJELEHSL EHSEL
0-0.005P P-0.02
-0.01
4mm(T4)
6mm(JIS)
4mm(T4)
6mm(JIS)
EHSL-0.005
Catalog No.
0
EHSJL
EHSEL
EHSJEL-0.01-0.02
Catalog No.Type D
H T
3
4
6
4
5
6
8
9
(P )
EHSL-0.005
0
(P )
EHSEL-0.01-0.02
(P )
EHSJL-0.005
0
(P )
EHSJEL-0.01-0.02
P N
1.5
1
2
2.5
3
4
4.5
5
100.01~150.00150.01~200.00
50.00~ 60.00 60.01~100.00 50.00~ 60.00
60.01~100.00
50.00~100.00100.01~150.00150.01~200.00100.00~150.00
100.00~150.00150.01~200.00
150.01~200.00100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00
(0.3)
(0.3)(0.3)
(0.4)
(0.4)(0.4)
(0.5)
(0.5)(0.5)(0.5)
3.0
3.0
2.62.5
2.5
2.5
2.42.32.2
2.1
2.1
2.0
2.0
2.0
2.0
1.9
1.9
1.8
1.8
1.8
1.7
1.7
1.6
1.6
1.6
1.5
1.5
1.5
1.4
1.4
1.4
1.3
1.3
1.3
1.21.21.2
1.2
1.2
1.2
1.1
1.1
1.1
1.01.01.0
1.0
1.0
1.0
0.90.90.9
0.9
0.9
0.8
0.80.80.8
0.8
0.8
0.7
0.70.70.7
0.7
0.6
0.60.60.6
200.01~250.00
20 35 40 50 60
20 35 40 50 60
50 70 90 50 70 80 90 100
40 50 6040 50 70 90
20 35 40 50 60 70 80 90 100 12550 70 90
20 35 40 50 60 70 80 90 100 12550 70 90
20 35 40 50 60 70 80 90 100 12550 70
70 100100 125
50 70 70 100
100 12550 70
70 100100 125
Catalog No.
EHSJL 4
L
240.30 P2.5
P N
N100
5 P.i
L
H
L 0.2GL
217
T
-0
.02
T
H
0-0.02
+0.1d
TC
0
HCC
0
21 3
H
T
d
t
B
S
Catalog No.
EHSL 2 150.00
L
P1.5
P
N70
N (KCCWKCEetc)
KTC1.5
NC
NHC
TMC
Code
TC
HCC
Alterations
NHN
NCW
GVC
Spec.
H -0
.3HC
0
HC
SK
C
-0.1SKC0
RK
C
RKC -0.10
DKC
DK
C
DKC0
-0.1
KAC -0.1KBC0
WKC0
-0.1
KC -0.10
120B
120B-0.1
120B
KTC0
Ú0.5
0BKGC
AGB 0
-0.1
KGC
Price PriceSpec.CodeAlterations
SKC
RKC
DKC
KBCKAC
WKC
KC
KTC
KGC
VWC0
-0.02
VKC -0.020
VWC
VKC
EHSL
EHSEL
EHSJL
EHSJEL
60.01~100.0050.00~150.00
50.00~100.00
50.00~100.00
100.01~150.00150.01~200.00
50.00~100.00100.01~150.00150.01~200.00100.00~150.00150.01~200.00100.00~150.00150.01~200.00
P L
0.30.6~0.8
0.50.40.3
0.40.5
0.6~1.2
0.7~1.8
0.8~2.1
1.0~2.6
1.5
1
2
2.5
3
DCatalog No.
Type
100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00200.01~250.00
P L
2.0~3.0
2.0 2.5
3.0
4
4.5
5
DCatalog No.
Type
High Speed SteelSKH51
-L DIMENSION DESIGNATION TYPE-STEPPED EJECTOR PINS
Step radius(R)
PHead Thickness
Range of guaranteed base material hardness
Range of guaranteed shaft diameter precision
Step R
58~60HRC
SKH51
0.01mm increments
The figures in( )for P dimensions are applicable for EHSL only. L-N˘10
Order
DeliveryDays
Express
Express AT
Express services not available for NHCCNHNCTMC
Alterations
L dimension designation type
Single flat cutting
(precision)D/2¯VKC<H/2
Two parallel flats cutting
(precision)D/2¯VWC<H/2
Single flat cutting
D/2¯KC<H/2
Two flats cutting
D/2¯WKC<H/2
Varied width parallel flats cutting
D/2¯KAC<H/2KBC=0.1mm increments only
KAC<KBC<H/2
Four flats cutting
D/2¯SKC<H/2
Two flats(right angled)cutting
D/2¯RKC<H/2
Three flats cutting
D/2¯DKC<H/2
Three flats cutting
at 120BD/2¯KTC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2AG=1Bincrements0<AG<360
About DesignationUnit for Key Flat Cutting
(1)To align the key
flat with the shaft
diameter
Unit of designation
0.05mm increments possible
(2)To designate
arbitrary key
flat dimensions
Unit of designation 0.1mm
rr
1
D+1¯HC<H, D˘1.5
HC=0.1mm increments
HCC=0.1mm increments
D+1¯HCC<H-0.3,D˘1.5
TC=0.1mm increments
T/2¯TC<T,D˘1.5
T-TC L̄max.-L Dimension L remains unchanged.
Dimension N becomes shorter by(T-TC).Dowel hole boring
Available when H˘4
Combination with other than
NHC/NHN/TMC/GVC not available.
Dowel hole boring+Spring pin driving
Available when H˘4
Combination with other than
NHC/NHN/TMC/GVC not available.
Automatic sequential numbering on the head
Combination with SKC not available
Numbering on the head
Combination with SKC not available
S,B=1mm increments
Available for P=3.0
2¯S¯10,S+5¯B¯30
Lapping on the tip face
Available when P˘0.6
T d r4 2 36 3 5
T d r1
4 25
6 3
IQuantity discount rateQuantity
Rate - 5%
5~12
10%
13~49
20%
50~1001~4
U/Price1~4
U/Price1~4
1211
For area out of Singapore please refer to P.i.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
011-012.ai 5/28/2011 1:55:42 PM
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
4mm(T4)
6C8mm(JIS) -0.01
0
T-0.020
R¯0.3)(D¯2
N-50
(L-N)
H-
0.3
0
D-
0.0
20
R¯0.5
P-0.010
W-
0.0
10
L+5+0.1
Catalog No.
ERPH
ERJ
T
0-0.02TC
5 2 3
5
P
90
0B
180
270B B
B
D/2
P90
0B 180
270B
B
BD/2
Catalog No.
ERPH
DType1.52
2.53
3.54
4.55
5.56
6.578
8.510
10.5-
-
L100C120C150 L175C200 L250
21 3
Catalog No.
ERJ
DType4
4.55
5.56
6.578
8.510
10.512
L100C120C150 L175C200 L250 L300
-0.10
KSA
W
-0.10
WSA
W
Mx1
MC
ERPH
H TCatalog No.
DL P W N
40
4040
4040
4040
4040
404040
404040
404040
404040
4040
40
4040
4040
40
40
40
40
30
30
50505050
5050
5050
5050
505050
505050
505050
505050
5050
50
5050
5050
50
5050
50
6060606060606060606060606060
60606060
60606060
6060606060
6060606060
60606060
60
60606060
60606060
606060
60
1.01.21.5
0.7
0.7
0.7
0.7
0.7
0.7
0.7
3.0
1.5(2.0)
2.0(2.5)
2.5(3.0)
3.0(3.5)
3.5(4.0)
4.0
4.5(5.0)
5.0
6.0
6.0
8.0
0.81.01.2
0.4
0.4
0.4
0.4
0.4
0.40.3
0.5
0.5
0.5
0.5
0.5
0.51.5
4
3
5
6
-
7
8
49
10
11
14
17
- - -
-
8
9
10
11
13
17
14
1515
6.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.5
(1.5)
(1.5)
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
(2.0)
(2.0)
(2.0)
(2.0)
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
(2.5)
2.5
(2.5)
2.5
2.5
2.5
2.5
2.5
2.57.0
10.0
10.0
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
8
8.5
10
10.5
12
70
7070
7070
7070
7070
707070
70707070
7070707070
7070707070
70707070
70
7070
7070
70
80
8080
8080
8080
808080
808080
80
808080
80
808080
80
80
80
80
80
80
80
90
90
90
9090
90
9090
100
100
100100
100100
100100
100100
100100
100100
100
100100
100100
100100
100100100
100100
100100100
130
130
120
120
120
120
120
120
120
120
120
120
160
160
160
180
180
180
180
200
H
-
6
8
T
150
150
150
150
150
150
100150100150200100150200100150200100150200250100
(120)150200250100120150200250100
(120)150
(175)200250100120150175200250
(120)150
(175)200250150200250120150175200250
(300)(120)
150(175)
200250
(300)150200250
(300)(120)(150)(175)
200250
(300)150200250
(300)150200250300
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
Price PriceSpec.CodeAlterations Spec.CodeAlterations
ERJ
-
-0
.30
H
HC
H
HCC
0-
0.0
2
B
P
90
0B
180
270B
B
0B
D/2
0
-0.
02
B
P
0B
90B270
B180
0B
D/2
0
-0.
02
5
120ERJ 8
LCatalog No. P
P6.0 N60
NW
W1.0
(AKCCAWCEetc)
AKC 0
ARC
ADC
KGA
KGD
VAK
VAW
NHC
NHN
TC
KSA
WSA
MC
HC
HCC
0B
D/2
0
-0.1 P
90
0B
180
270B B
B
P
0B
B90B270
B180
0B
D/2
0
-0.1
D/2
0B
D/2
0B 0B
P
270B 90B
180B
0B
P
270B 90B
180B
120ERJ8 P6.0
P
W1.0
W
N60
NLCatalog No.
5 P.i w
Pmin.
Pmax.
Rmax.
AKC
AWC
-IQuantity discount rate
A
A
Days Express
Order
Alterations
Delivery
Express services not available for KSACWSACNHCCNHNCMCExpressDays
(JIS head)
RECTANGULAR EJECTOR PINSPCW 0-0.01
Standard
Head Thickness PCW
Step radius(R)
Range of guaranteed shaft diameter precision
Step R
Range of guaranteed base material hardnessSKH51 58~60HRC
ARC=1Bincrements
0¯ARC<360
When combined with KSA/WSA, 90Bincrements only.
ADC=1Bincrements
0¯ADC<360
When combined with KSA/WSA, 90Bincrements only.
KGA=1Bincrements
0<KGA<360
KGD=1Bincrements
0<KGD<360
D+1¯HCC<H-0.3
HCC=0.1mm increments
HC=0.1mm increments
D+1¯HC<H
W/2+0.1¯WSA¯D/2-0.1
WSA=0.1mm increments
KSA=0.1mm increments
W/2+0.1¯KSA¯D/2-0.1
TC=0.1mm incrementsT/2¯TC<TDimensions L and N become shorter by(T-TC).
Tapping
D8C8.5 M4D10C10.5 M5D12 M6 Available when D˘8
Not available for ERPH.
Numbering on the head
Automatic sequential numbering on the head
4mm head JIS head4mm head JIS head
(4mm head)
L(120)(150)(175)(300) are available only for ERJ.
U/Price for 1~49 U/Price for 1~49
-Quantity Rate
1~4950~100 5%
Selections in which both the P and W dimensions are enclosed in brackets( )cannot be made.
Precision Standard
Squareness of the tip corner
W plane as the base
Rmax.¯0.03(Trimming R)Corner R value of the tip corner
(Pmax.-Pmin.)̄ 0.02
The tip corners have been slightly
trimmed to measure the PCW
dimensions.
0¯VAK<360VAK=45Bincrements
KSA,WSA not available
0¯VAW<360VAW=45Bincrements
KSA,WSA not available
0¯AKC<360
AKC=1Bincrements
AWC=1Bincrements
When combined with KSA/WSA, 90Bincrements only.
0¯AWC<360
When combined with KSA/WSA, 90Bincrements only.
-STANDARD TYPE-
1413
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
013-014.ai 5/28/2011 1:55:51 PM
b1(Range of guaranteed shaft diameter precision)x1 max.=30
Range of guaranteed base material hardness
Range of guaranteed surface hardness for nitriding
Note that the Stepped Center Pin’s shaft diameter(D)is too large to fit in the recess(C)of ESNV.
H
0-
0.3
CÚ
0.1
R¯0.5
T=4 0-0.02 -0.02
-0.01
(L-S) S-5 0
L+5+0.1
F0.03 D
x1
V¯3.0 3.5¯V¯6.0 V˘6.5
+0.0100
+0.0120
+0.0150
V H7
Catalog No.
ESNV H7
L
S
10075 125 150 175 200 250 275225 300
50(V1.5 40)40 60(V1.5 40) 8060 90
-0.01-0.02
(KCCWKCEetc.)Catalog No. L V
ESNV8 100 4.0 KC4.5
5
ESNV8
Catalog No.
100
L
4.0
V
Code
HC
Alterations
H -0
.3HC
0
Spec. PricePrice
TC4
0-0.02TC
Spec.CodeAlterations
RK
C
RKC -0.10 RKC
DKCDKC
DK
C
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC -0.10 KC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
Catalog No.
Type D
Catalog No.L
75 100 125 150 175 200 225 250 275 300Type D
V1.5
V2.0C2.5
V1.5
V2.0C2.5
4
4.5
5
5.5
6
6.5
7
7.5
8
9
10
H
7
8
9
10
11
14
15
4
4.5
5
5.5
6
6.5
7
7.5
8
9
10
1.5
2.0 2.5
1.5
2.0 2.5
2.0 2.5 3.0
2.0 2.5 3.0 3.5
2.5 3.0 3.5 4.0
2.5 3.0 3.5 4.0
2.5 3.0 3.5 4.0 4.5 5.0
3.0 3.5 4.0 4.5 5.0
4.0 4.5 5.0 5.5 6.0
6.0 6.5 7.0
6.0 7.0 8.0
LV
ESNV
ESNV
C=V+0.5
-
-
-
-
-
-
- -
SKC
SK
C
SKC -0.10
75
75
75
75
75
75
75
75
75
75
75
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
125
125
125
125
125
150
150
150
150
150
150
150
150
150
150
150
150
150
175
175
175
175
175
175
175
175
175
175
175
200
200
200
200
200
200
200
200
200
200
200
225
225
225
225
225
225
225
250
250
250
250
250
250
250
275
257
300
300
- -
SKD61+NitridedConcentricitym0.034mm head
STRAIGHT EJECTOR SLEEVES
Selection
Days
Order
Delivery
IQuantity discount rateQuantity
Rate 5%5~50
-1~4
U/Price for 1~4
— STANDARD TYPE —
GNote that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance is not recommended. The reason for this is the fitting sections S are longer.
V Applicable center pin shaft diamater tolerance
0.000-0.005
VH7
b1(Range of guaranteed shaft diameter precision)
SKD61+Nitrided
Surface:900HV~Base material:40Ú3HRC
Alterations
Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2
Two flats cutting
D/2¯WKC<H/2
Single flat cutting
D/2¯KC<H/2
Three flats cutting
at 120BD/2¯KTC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2AG=1Bincrements0<AG<360
Two flats(right angled)cutting
D/2¯RKC<H/2
Three flats cuttingD/2¯DKC<H/2
Four flats cuttingD/2¯SKC<H/2
0-0.1Tolerance
0.1mm
0-0.1
About DesignationUnit and Tolerancefor Key Flat Cutting
(1)To align the key
flat with the shaft
diameter
0.05mm increments possible
Unit of designation
0-0.1It remains at even
when D/2 is designated
to fit shaft diameter.
Unit of designation
Tolerance
(2)To designate
arbitrary key
flat dimensions
D¯HC<H
2.0¯TC<4
HC=0.1mm increments
In relation to the head diameter tolerance, alteration may create a straight piece with little diameter difference between the head and shaft.
Dimensions L and(L-S)become shorter by(4-TC).
TC=0.1mm increments
1615
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
015-016.ai 5/28/2011 1:56:01 PM
b1(Range of guaranteed shaft diameter precision) x1 max.=30
Range of guaranteed base material hardness
Range of guaranteed surface hardness for nitriding
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
Catalog No.
ESN H7
L
S
10075 125 150 175 200 250 300
50(V1.5 40)40 60(V1.5 40) 8060 90
ESN8
Catalog No.
100
L
4.0
V
F0.06
V H7
-0.02-0.01
DT=4
0-0.02
(L-S) 0-5
L+0.5+0.1
CÚ
0.1
H
0-
0.3
S
C=V+0.5
5
(KCCWKCEetc.)Catalog No. L V
ESN8 200 4.0 KC4.5
R¯0.5
x1
Catalog No.
ESN
L175Type D L75 L100 L125 L150 L200 L250 L300
4
55.56
6.57
7.589
10121316
4.5
V1.5V2.0C2.5
V1.5V2.0C2.5
-
-
-
-
-
-
-
-0.01-0.02
ESN
HCatalog No.
Type DL
10075 125 150 175 200 250 300V
7
8
9
10
11
18
15
17
14
21
4
4.5
5
6
5.5
6.5
7.5
7
8
9
10
12
13
16
1.52.02.51.52.02.52.02.53.02.02.53.03.52.53.03.54.02.53.03.54.02.53.03.54.04.55.03.03.54.04.55.04.04.55.05.56.06.06.57.06.07.08.08.09.08.09.0
10.010.011.012.0
lllllllllllllllllllllllllllllllllllll
lllll
llllllllllllllll
ll
lllll
llllllllllllllll
ll
lllll
llllllllllllllll
ll
lllll
llllllllllllllll
ll
lllll
llllllllllllllll
ll
l
llllllllllllllll
ll
l
lll
l
lll
l
lll
ll
ll
l l l l l l l
l l l l l l ll l l l l l ll l l l l l l
l l l l l l ll l l l l l ll l l l l l l
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Code
HC
Alterations
H -0
.3HC
0
Spec. Price
TC4
0-0.02TC
Spec.CodeAlterations
RK
C
RKC -0.10 RKC
DKCDKCD
KC
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC -0.10 KC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
V¯3.0
+0.010 0
3.5¯V¯6.0
+0.012 0
6.5¯V¯10.0
+0.015 0
V˘11.0
+0.018 0
5 P.i
SKC
SK
C
SKC -0.10
A
A
VH7
Note that the Stepped Center Pin's shaft diameter(D)is too large to fit in the recess(C)of ESN.
-STANDARD TYPE-STRAIGHT EJECTOR SLEEVES
Applicable center pin shaft diamater tolerance
b1(Range of guaranteed shaft diameter precision)
GNote that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance is not recommended. The reason for this is the fitting sections S are longer.
SKD61+Nitrided
Surface:900HV~Base material:40Ú3HRC
V
D¯HC<H
2.0¯TC<4
Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2
Two flats cutting
D/2¯WKC<H/2
Single flat cutting
D/2¯KC<H/2
Three flats cutting
at 120B
D/2¯KTC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2AG=1Bincrements0<AG<360
Two flats(right angled)cutting
D/2¯RKC<H/2
Three flats cuttingD/2¯DKC<H/2
Four flats cuttingD/2¯SKC<H/2
Selection
Tolerance
(1)To align the key
flat with the shaft
diameter
0.05mm increments possible
Unit of designation
0-0.1It remains at even
when D/2 is designated
to fit shaft diameter.
Unit of designation
Tolerance
(2)To designate
arbitrary key
flat dimensions
HC=0.1mm increments
In relation to the head diameter tolerance, alteration may create a straight piece with little diameter difference between the head and shaft.
Dimensions L and(L-S) become shorter by(4-TC).
TC=0.1mm increments
About DesignationUnit and Tolerancefor Key Flat Cutting
0-0.1
SKD61+NitridedConcentricity 0.06
4mm head
for L dimension specifications
lfor L dimension specifications
Days
Days
¡
K
3
Days
Express
Express
Note that when you order ESN, entry of an
alphabetical character(V)is not required.
U/Price for 1~4
Products with the marks are in 3-days, and ones with the l marks will be shipped in 5-days.
QuantityRate - 5%
5~501~4
Order Delivery
Alterations
0-0.1
0.1mm
0-0.005
IQuantity discount rate
1817
Price
017-018.ai 5/28/2011 1:56:10 PM
(L>200 L )
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
Catalog No.
ESN-LC H7
ESN-LC8
Catalog No.
123.65
L
V4.0
V 5 P.i
(KCCWKCEetc.)Catalog No. L V
ESN-LC8 196.25 V4.0 KC4.5
ESN-LC
-
-
-
-
-
-
-
F0.06T=4
CÚ
0.1
H
0-0.02
-0
.3
0
L+0.02 0
x1
R¯0.5
SZ 0-5
+0.05 0
ESN-LC
8
9
10
11
14
15
17
18
21
7 4
5
4.5
5.5
6
6.5
7
7.5
8
9
10
12
13
16
1.52.02.51.52.02.52.02.53.02.02.53.03.52.53.03.54.02.53.03.54.02.53.03.54.04.55.03.03.54.04.55.04.04.55.05.56.06.06.57.06.07.08.08.09.08.09.0
10.010.011.012.0
HCatalog No.
Type DVL
Code
HC
Alterations
H -0.3
HC0
TC4
0-0.02TC
C=V+0.5V0.
1
RGX
CGX
Ú0.05CGX45B
L
L
L
L
RGZ
CGZ
0.1RGZÚ0.1
0.1
V
45B
V
CGZÚ0.05
Ú0.1 V0.1RGX
L
Z
50.00~75.00
35
75.01~100.00
50(V1.5 60)
100.01~125.00
75(V1.5 85)
125.01~150.00
90(V1.5 110)
150.01~175.00
115
175.01~200.00
120
200.01~250.00
170
250.01~300.00
210
V H7
-0.02-0.01
D
Spec.CodeAlterations
RKC
RK
C
RKC -0.10
DKCDKC
DK
C
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC -0.10 KC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
Price Price
-0.01-0.02
Spec.
50.00 ~ 200.00
50.00 ~ 150.00
50.00 ~ 200.00
50.00 ~ 200.00
50.00 ~ 150.00
50.00 ~ 250.00
50.00 ~ 250.00
50.00 ~ 200.00
50.00 ~ 250.00
50.00 ~ 250.00
50.00 ~ 250.00
80.00 ~ 300.00
80.00 ~ 300.00
80.00 ~ 300.00
80.00 ~ 300.00
80.00 ~ 300.00
4
4.5
Type D L50.00~75.00
L100.01~125.00
L125.01~150.00
L150.01~175.00
L175.01~200.00
L200.01~250.00
L250.01~300.00
L75.01~100.00
V1.5V2.0C2.5
V1.5V2.0C2.55
5.56
6.57
7.589
10121316
-
-
V¯3.0
+0.010 0
3.5¯V¯6.0
+0.012 0
6.5¯V¯10.0
+0.015 0
V˘11.0
+0.018 0
SKCSK
C
SKC -0.10
Catalog No.
STRAIGHT EJECTOR SLEEVES-L DIMENSION DESIGNATION TYPE-
SKD61+NitridedConcentricitym0.064mm head
Applicable center pin shaft diamater toleranceV
GNote that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance is not recommended. The reason for this is the fitting sections S are longer.
b1(Range of guaranteed shaft diameter precision)
VH7
0-0.005
b1(Range of guaranteed shaft diameter precision)x1 max.=30
Range of guaranteed base material hardnes
Range of guaranteed surface hardness for nitriding
SKD61+Nitrided
Surface:900HV~Base material:40Ú3HRC
Note that the Stepped Center Pin's shaft diameter(D)is too large to fit in the recess(C).
S dimension depends on the designated L dimension.
S=L-Z
Order
Alterations
DeliveryDays Express A
Express services
not available for CGXCRGXCCGZCRGZ.
For L dimension less than 50mm, please use Short Ejector Sleeves ECB, ECBB.(Only for D4C5C6C7C8C10)
0.01mm increments Selection
Three flats cutting
at 120BD/2¯KTC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2
AG=1Bincrements
0<AG<360
Varied width parallel flats cutting
D/2¯KAC<H/2
KBC=0.1mm increments only
KAC<KBC<H/2
Two flats cutting
D/2¯WKC<H/2
Single flat cutting
D/2¯KC<H/2
Two flats(right angled)utting
D/2¯RKC<H/2
Three flats cutting
D/2¯DKC<H/2
Four flats cutting
D/2¯SKC<H/2
0.1mm
0-0.1
0-0.1Tolerance
About DesignationUnit and Tolerancefor Key Flat Cutting
(1)To align the key
flat with the shaft
diameter
0.05mm increments possible
Unit of designation
It remains at even
when D/2 is designated
to fit shaft diameter.
Unit of designation
Tolerance
(2)To designate
arbitrary key
flat dimensions
D¯HC<HHC=0.1mm increments
2.0¯TC<4, 4-TC¯Lmax.-L
Dimension Z becomes shorter by(4-TC).
TC=0.1mm increments
Dimension L remains unchanged.
CGX=0.1mm increments
Combination with RGX/CGZ/RGZ not available.
0.2¯CGX¯1.5 and CGX¯ -0.1D-V
2
RGX=0.1mm increments
0.3¯RGX¯1.5 and RGX¯ -0.1D-V
2Combination with CGX/CGZ/RGZ not available.
Combination with CGX/RGX/RGZ not available.
Combination with CGX/RGX/CGZ not available.
CGZ=0.1mm increments
0.2¯CGZ¯1.0 and CGZ¯ -0.1D-V
2
RGZ=0.1mm increments
0.5¯RGZ¯1.0 and RGZ¯ -0.1D-V
2
In relation to the head diameter tolerance, alteration may create a straight piece with little diameter difference between the head and shaft.
IQuantity discount rateQuantity
Rate - 5%5~121~4
10%13~19
15%20~50
U/Price for 1~4
2019
0-0.1
019-020.ai 5/28/2011 1:56:19 PM
b1(Range of guaranteed shaft diameter precision) x1 max.=35
Range of guaranteed base material hardness
Range of guaranteed surface hardness for nitriding
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
Catalog No.
ESJ
200ESJ8
LCatalog No.
4
V
KC4.0
(KCCWKCEetc.)
H7
V¯3 3.5¯V¯6 6.5¯V¯10
D¯12 D˘15
-0.02-0.01 -0.01
-0.03
+0.010 0
+0.012 0 0
+0.015
V˘12
0+0.018
HCatalog No.
Type DV
475 500
100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450
475 500
100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450
475 500
300
325 350 375 400 425 450
100 120 140 160 180 200 225 250 275
475 500
300
325 350 375 400 425 450
100 120 140 160 180 200 225 250 275
325 350
100 120 140 160 180 200 225 250 275 300
325 350 375
375
400 425 450
100 120 140 160 180 200 225 250 275 300
325 350 375 400 425 450
100 120 140 160 180 200 225 250 275 300
250 275 300
100 120 140 160 180 200 225
250 275 300
100 120 140 160 180 200 225
100 120
300275250225200180160140120100
450425400375350325
4
5
5.5
6
6.5
7
7.5
ESJ
8
6
T
8
12
10
8
9
17
15
13
14
12
11
10
9
L
180 200100 120 140
140
140
160
100 120
100 1204.5
180 200140 160
20
25
475 500200 225 250 275 300 325 350 375 400 425 45015
475 500200 225 250 275 300 325 350 375 400 425 45020Code
HC
Alterations
H -0
.3HC
0
Spec. Price
TCT
0-0.05TC
+0.1L+5
S
T
0
H-
0.3
(L-S)
-0.05 0
0-5
F0.06
C=V+0.5
R¯0.5
L
S
100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450 475 500
50(V1.5 40) 10075 115 150
H7V
D
CÚ
0.1
-0.01-0.02
Spec.CodeAlterations
RK
C
RKC -0.10 RKC
DKC
DKCDK
C
DKC0
-0.1
KAC -0.1KBC0
KBCKAC
WKC0
-0.1
WKC
KC -0.10 KC
KTC120B
120B-0.1
120B
KTC0
KGC
Ú0.5
0BKGC
AGB 0
-0.1
KGC
x1
1.5
2
1.5
2
2
3
2
3
2
3
2
3
2
3
3
3.5
2
3
5
2
3
5
4
5
4
5
9
12
2.5
2.5
2.5
2.5
2.5
3.5
2.5
3.5
2.5
3.5
3.5
4
2.5
3.5
2.5
3.5
5.5
4.5
5.5
4.5
5.5
10
15
3
3
3
3
4
3
4
4
4.5
3
4
3
4
6
5
6
5
6
3.5
3.5
3.5
4.5
4.5
3.5
4.5
3.5
4.5
5.5
6.5
5.5
6.5
4
4
4
4
5
4
5
6
7
6
7
4.5
4.5
4.5
6.5
6.5
8
5
5
7
7
5.5
5.5
8 8.5
VL 3
LDType
Catalog No.
100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450 475 500
4
4.5
55.56
6.57
7.589
10121520
ESJ
- - - - -
- -
- - -
-- - - -
- - - -
-
-
-
-
-
- -
V1.5
V2C2.5
V1.5
V2C2.5
SKC
SK
C
SKC -0.10
2.5120ESJ6.5
Catalog No. P.i5 ADays
D
VH7
Note that the Stepped Center Pin's shaft diameter(D)is too large to fit in the recess(C)of ESJ.
-STANDARD TYPE-STRAIGHT EJECTOR SLEEVES
Applicable center pin shaft diamater tolerance
b1(Range of guaranteed shaft diameter precision)
GNote that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance is not recommended. The reason for this is the fitting sections S are longer.
SKD61+Nitrided
Surface:900HV~Base material:40Ú3HRC
V
D¯HC<H
T/2¯TC<T
Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2
Two flats cutting
D/2¯WKC<H/2
Single flat cutting
D/2¯KC<H/2
Three flats cutting
at 120B
D/2¯KTC<H/2
Two flats(angled)cutting
D/2¯KGC<H/2AG=1Bincrements0<AG<360
Two flats(right angled)cutting
D/2¯RKC<H/2
Three flats cuttingD/2¯DKC<H/2
Four flats cuttingD/2¯SKC<H/2
Tolerance
(1)To align the key
flat with the shaft
diameter
0.05mm increments possible
Unit of designation
0-0.1It remains at even
when D/2 is designated
to fit shaft diameter.
Unit of designation
Tolerance
(2)To designate
arbitrary key
flat dimensions
HC=0.1mm increments
In relation to the head diameter tolerance, alteration may create a straight piece with little diameter difference between the head and shaft.
Dimensions L and(L-S) become shorter by(T-TC).
TC=0.1mm increments
About DesignationUnit and Tolerancefor Key Flat Cutting
Alterations
Order
IQuantity discount rateQuantity
Rate - 5%5~501~4
Note that when you order ESJ, entry of
an alphabetical character(V)is not required.
Selection
ExpressDelivery
0-0.1
0.1mm
0-0.1
SKD61+NitridedConcentricity 0.06
JIS head
U/Price for 1~4
0-0.005
2221
Price
021-022.ai 5/28/2011 1:56:29 PM
2423
SGP StockSGP StockPrinted in Red
Catalog No.
CPD
CPH
SKD61
SKH51
48~52HRC
58~60HRC
-0.01-0.02
-0.005 0
D
4
H
L+0.1+5
R¯0.3
-0
.3
0
0-0.02
CPD*
(SKH51)
(SKD61)
CPH
5
6
7
8
9
10
11
15
18
21
3
4
HCatalog No.
TypeL
D
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2*
2.5*
3*
3.5*
4*
4.5*
6*
6.5*
7*
8*
10*
13
16
5.5*
5*
60*
100*
60
L
CPD6
Catalog No.
Catalog No.
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
8
10
13
16
L60 L100DType
CPD(SKD61)
Catalog No.
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
8
10
13
16
L60 L100DType
CPH(SKH51)
CORE PIN BLANKS
D
U/Price for 1~49 U/Price for 1~49
Delivery
Order
QuantityRate - 5%
50~1001~49
IQuantity discount rate
¡ CPD*CPH ¡ Printed in Blue
syaD3
CPD with * are Stock Product.
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
Quotation Quotation
Stocks Availability Subjected to Prior Sales.
023-024.ai 6/2/2011 9:40:04 AM
( F50
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
For area out of Singapore please refer to P.i.
For area out of Singapore please refer to P.i.
AP
Alterations Code
TC
Spec. Price Price
A15
AN
N30.0200.0
L
AP25
Catalog No.
5 D4~25
D30~50 P.i5
P.i
TC
AB
min.2
1.6G
SR=D/2
Df6
S
L
N
Dm
5
T -0.2
Ú0.2
ABÚ15V
H-
0.2
S
SR=D/2
0
0
A15N30.0200.0APS25
D
4~ 8
10~50 SUJ2
SKD11 60~63HRC
APS
S
SR=D-1
22D-1
SR=
S
L
N
1.6G
Dm
5
T-0.2
Ú0.2
-0
.2H
ABÚ15V
*C
V)BÚ30 A
( F50 V)BÚ30 A
0
0
(D-
1)
-0.
050
200.0APS 25
LCatalog No. N
N30.0 DC24.5
(TCCCMCDKCCDCCKACCTM)A
A15 DKC KAC
KAC
DKC
Alterations Code
CM
Spec.
DC
TM
DK
C
C
DC
N
D m5 f6(AP) T H
S
7
8
9
+0.009+0.004
-0.010-0.018
5
11
13
15
Catalog No.TypeAP APS D L N
AAPS
+0.012+0.006
-0.013-0.022
16
10
18
AP
APS
13
19
23
28
35
15
37
40
45
4
5
6
8
10
15
13
12
16
20
30
25
40
50
35
32
+0.020+0.009
-0.025-0.041
2
2.5
3
4
5
6
6.5
7.5
8
10
9.5
1.5
2
2.5
3.5
4.5
5.5
6
7
7.5
10
+0.017+0.008
-0.020-0.033
+0.015+0.007
-0.016-0.027
AP
N=0or
N¯L-T-12¯N
0~30
4
5
6
8
10
12
13
15
16
20
25
30
32
35
40
50 5520
15.0~ 70.070.1~ 90.015.0~ 70.070.1~ 90.090.1~100.015.0~ 70.070.1~ 90.090.1~110.015.0~ 80.080.1~110.0
110.1~130.020.0~110.0
110.1~160.0160.1~200.020.0~110.0
110.1~160.0160.1~200.0200.1~250.020.0~110.0
110.1~160.0160.1~200.0200.1~250.020.0~110.0
110.1~160.0160.1~200.0200.1~250.020.0~110.0
110.1~160.0160.1~200.0200.1~250.0
40.0~130.0130.1~200.0200.1~300.0300.1~350.040.0~130.0
130.1~200.0200.1~300.0300.1~350.0350.1~400.060.0~160.0
160.1~220.0220.1~300.0300.1~400.0400.1~500.0
400.1~500.0
70.0~160.0160.1~220.0220.1~300.0300.1~400.0
100.0~160.0160.1~220.0220.1~300.0300.1~400.0
100.0~160.0160.1~220.0220.1~300.0300.1~400.0
400.1~500.0
400.1~500.0200.0~260.0260.1~320.0320.1~400.0400.1~500.0
R¯0.5
R¯0.5
N
ANGULAR PINS
58HRC~(Induction hardening)
0.3Profile tolerance of SR
max.2(R¯0.5 when D=4~8.)
When D˘25,
the pin tip becomes
as shown in
the drawing
on the left.
R¯0.5
when D=4~8.
Machining may leave a chuck keyhole on one end of the pin in case of D=20 or 25. Dimensions of the pins with chuck keyholes are values prior to machining of the holes. In case of D=30 or more, the both ends may have chuck keyholes.
0.3Profile tolerance of SR
max.2(R¯0.5 when D=4~8.)
R¯0.5
when D=4~8.
When D˘25,
the pin tip becomes
as shown in
the drawing
on the left.
*For D4~25, C-chamfering is performed on the edges of the steps.(Recess of C-chamfering for assembling: about C0.3)
In case of D=30 or more, the both ends may have chuck keyholes.Dimensions of the pins with chuck keyholes are values prior to machining of the holes. Machining may leave a chuck keyhole on one end of the pin in case of D=20 or 25.
(Stepped type)
Days
Days
Delivery
Order
Alterations
Express AExpress T
Express A
IQuantity discount rateQuantity
Rate - 5%
20~2910~191~9
15%10%
30~50
TC=0.1mm increments(Reduces the head thickness. The full length remains unchanged.)
TC min: Fractions are rounded up to the first digit
T>TC˘H/2 tan A+2.0
Single flat chamfering
Available when D¯30
Press-fit section tolerance alteration
Available when D¯30
Adds a 30BTaper on the edge of step.
(Taper for installation)
Combination with CMCDC not available
Available for APS
(Recess of C-chamfering for assembling: about C0.3)Available for APS when D˘30
Performs chamfering on the edge of the step.
Chamfering is performed as standard for D¯25.
DC=0.1mm incrementsTolerance of the step's external diameter:
Changes(D-1)step by designation.
D-0.1˘DC>D-1
Available for APS when D¯30
When DC is used SR=DC2
-0.050
Tapered 30B
Available when N¯200
Dm5 UDChanges+0.005
0
Changes the head shape
from a cone to a single flat cut.
4.2TC=13/2 tan 18B+2.0=4.112
(Stepped type) (No press-fit section)
1BincrementsU/Price for 1~9 0.1mm increments
2625
Quo
tation
Quo
tation
Quo
tation
025-026.ai 5/28/2011 1:56:43 PM
The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.
R¯0.5
T S
1.6G
-0.2
Ú0.2
Dm
5
N
f6D
L
SR=D/2
0
H-
0.2
0
SR=D-0.2
2
H
T S
1.6G
-0
.2
-0.2
Ú0.2
Dm
5
N
L
0
0
R¯0.5
L(LC)Catalog No. N (ATCCKACCTTCCDKCCDCCTM)
5
LCatalog No. N
P.i
TC
T
TTC
T
DC
DK
C
L
LC
N
D
8
10~20 SUJ2
SKD11 60~63HRC
58HRC~
APZ
APZS
100APZ13 N30.0LC95APZS13 N30.0
ATC TC6.0A15KAC TTC6.0A15 DC12.5DKC
APZ13 100 N30.0
Alterations Code
ATC
TTC
Spec.
KAC
PricePrice Alterations Code Spec.
LC
DC
TM
DKC
D8
101213151620
LC
40<LC<110
90<LC<180
70<LC<140
50<LC<130
D m5 f6 T HS
APZ APZSCatalog No.
Type D L NAPZ APZS
10
13
15
16
18
23
13 19
10
12
13
15
16
20
8 11 4 3.9
5 4.9
6 5.9
6.5 6.4
7.5 7.4
8 7.9
10 9.9
5
10
12
13
15
16
20
8
APZ
APZS
405060708090
100110
5060708090
100110120130
5060708090
100110120130
708090
100110120130140
708090
100110120130140
90100110120130140150160170180
405060708090
100110
N=0or
N¯L-T-12¯N
max.2(R¯0.5 when D=8.)
max.2(R¯0.5 when D=8.)
f6(
D-0.
2)
AÚ
15'
AB
+0.012+0.006
-0.013-0.022
+0.015+0.007
-0.016-0.027
+0.017+0.008
-0.020-0.033
-ECONOMY TYPE-
(Stepped type)
ANGULAR PINS
(Induction hardening)
Profile tolerance of SR 0.3
Profile tolerance of SR 0.3
When D=8
When D=8
IQuantity discount rateQuantity
Rate - 5%
10~191~9
10%
20~29
15%
30~50
Express AExpress T
DaysDelivery
Order
Alterations
When this pin is used in combination with an ATC, the overall length becomes the dimension from the thick end face of the flange specified by the ATC.
Full length alteration LC=0.1mm increments
Designation method ATC-A15-TC6.0
Makes the head end into a cone and reduces the head thickness. The full length becomes shorter by(T-TC).The full length is the same as LC when LC is combined.A=1Bincrements A=0~30BTC=0.1mm incrementsT˘TC˘2.0
TC˘H/2 tanA+2.0TC min: Fractions are rounded up to the first decimal place. TC=16/2 tan15B+2.0=4.1432 4.2
Single flat chamferingAdds a single flat on the head.A=1Bincrements A=0~30B
Combination with ATCCTTC not available.
Head thickness change
TTC=0.1mm increments
T>TTC˘2.0
The full length becomes shorter
by(T-TTC).The full length is the
same as LC when LC is combined.
Designation method KAC-A15Changes(D-0.2)step by designation.
DC=0.1mm increments
D-0.1˘DC>D-1Tolerance of the step's external diameter: f6
Available for APZS.
Dm UD+0.005
05
Press-fit section tolerance alteration
Changes
Adds a 30B Taper on the edge of step.
(Taper for installation)
Combination with DC not available.
Available for APZS
Tapered 30B
(Stepped type)(No press-fit section)
U/Price for 1~9 0.1mm increments
2827
For area out of Singapore please refer to P.i.
Quo
tation
Quo
tation
Quo
tation
027-028.ai 5/28/2011 1:56:52 PM