EXPLORATIONSYSTEMS

DEVELOPMENT

C O M B I N E D M O N T H LY R E P O RT

March 2017

ORION

5 President Trump Signs On for Future Space Exploration

6 Making the Drop

7 Elected Officials Get Close-Up Look at Orion

8 Lockheed Martin Demonstrates Safety Excellence

8 Texans Launch Space Days 2017

9 Getting to Mars Via SXSW

11 So-Cal Suppliers Welcome NASA

12 Orion Suppliers Honored for Outstanding Performance

SPACE LAUNCH SYSTEM

14 NASA Tests New Engine Controller for First Space Launch System Flight

14 Critical Testing Underway for Upper Part of SLS Rocket

15 NASA at South by Southwest

16 Interim Cryogenic Propulsion Stage Arrives at Cape

17 I Am Building SLS: Maury Vander

17 Space Flight Partners: Houston Precision Fasteners

18 NASA Day in Montgomery

18 Greetings from California

GROUND SYSTEMS DEVELOPMENT & OPERATIONS

20 First Umbilical Installed on Mobile Launcher

21 Crawler-Transporter 2 Takes Test Drive Along Crawlerway

22 New Ground Launch Sequencer Software Demonstrated in Launch Control Center

23 Pneumatic Systems Tested in Multi-Purpose Payload Facility for Orion

24 Ground Systems Spotlight - Craig Daniels

25 Ground Systems Spotlight - Allison Mjoen

26 Faces of GDSO: Regina Britton

ORIONM A R C H 2 0 1 7

A SIGN OF THE TIMES

ORION’S MONTHLY HIGHLIGHTS

PRESIDENT TRUMP SIGNS ON FOR FUTURE SPACE EXPLORATION

ASTRONAUT GETS HANDS-ON DEMO OF ORION TEXANS LAUNCH SPACE DAYS 2017 GETTING TO MARS VIA SXSW

ORION SUPPLIERS HONORED FOR OUTSTANDING PERFORMANCE

MAKING THE DROP

SO-CAL SUPPLIERS WELCOME NASA

February 2017 HighlightsOctober 2016 Highlights4 ESD Combined Report March 20174OrionOrion

PRESIDENT TRUMP SIGNS ON FOR FUTURE SPACE EXPLORATIONOn March 21, President Donald J. Trump signed the National Aeronautics and Space Administration (NASA) Transition Authorization Act of 2017, the first comprehensive NASA authorization passed by Congress in more than six years. The bill demonstrates strong bipartisan support for the Nation’s space program and helps ensure that NASA remains at the forefront of exploration and discovery.

The historic signing ceremony took place at the White House with Vice President Mike Pence and a number of senators, representatives, and NASA officials in attendance, including Acting NASA Administrator Robert Lightfoot and NASA astronauts Tracy Dyson and Chris Cassidy.

The Authorization Act, passed unanimously by Congress, proposed a $19.1 billion budget to provide a powerful framework for NASA and a roadmap for the Nation’s future in space.

Watch the video: NASA Authorization Act of 2017 Signing

Read the White House statement: NASA Transition Authorization Act of 2017

March 2017 ESD Combined Report 5

66

MAKING THE DROPEngineers successfully tested the parachutes for NASA’s Orion spacecraft at the U.S. Army Yuma Proving Ground in Arizona on March 8. This was the second test in a series of eight that will certify Orion’s parachutes for human spaceflight.

The test, which dropped an Orion engineering model from a C-17 aircraft at 25,000 feet, simulated the descent astronauts might experience if they have to abort a mission after liftoff. 

For more articles of interest on this test:http://bit.ly/DropTest_SFNhttp://bit.ly/DropTestSuccess

OrionFebruary 2017 Highlights OrionMarch 2017October 2016 HighlightsESD Combined Report

7

Brevard County Commissioner Rita Pritchett met with the Orion team and toured the Neil Armstrong Operations and Checkout Building at NASA’s Kennedy Space Center on March 13 for a program update and opportunity to view assembly of the Exploration Mission-1 Orion spacecraft.

The County Commission has authority over local economic development incentives designed to grow high-tech business opportunities and jobs in the county. Commissioner Pritchett represents the Titusville area where Lockheed Martin’s Astrotech Space Operations is located.

On March 28, congressional district staff members for U.S. Rep. Bill Posey (R-FL-8), also enjoyed a facility tour and program update on Orion’s progress toward its next space flight atop NASA’s Space Launch System. Posey is a leading member of the House Science Committee’s Space Subcommittee with oversight responsibilities for NASA’s space exploration programs.

ELECTED OFFICIALS GET CLOSE-UP LOOK AT ORION

HANDS ON ORIONAstronaut Victor Glover evaluates cage designs for Orion’s translational hand controller at the Reconfigurable Operational Cockpit at NASA’s Johnson Space Center in Houston, Texas.

U.S. Rep. Posey’s staff poses for photo by an Orion model. Joe Mayer, Lockheed Martin Space Systems Government Relations in

Florida, is pictured second from left.

ESD Combined ReportMarch 2017

LOCKHEED MARTIN DEMONSTRATES SAFETY EXCELLENCEOn March 28, Lockheed Martin Space Systems was awarded the NASA Johnson Space Center (JSC) Contractor Safety and Health Forum (CSF) Safety and Health Excellence Nova award. The award recognizes contractor organizations that have demonstrated excellence in safety and health and significant participation in JSC safety and health activities.

TEXANS LAUNCH SPACE DAYS 2017Members of the Orion team participated in Space Day Texas on March 7 in Austin. Space Day is NASA’s biannual visit with the legislators at the Texas State Capitol to showcase current programs and milestones at NASA’s Johnson Space Center, thank the legislators for support of the Texas Aerospace Scholars and

Technology Outreach Program and present the economic benefits of having a NASA center in their backyard. The event included educational and interactive exhibits, astronaut appearances and legislative proclamations that highlighted achievements in human exploration throughout the Lone Star State.

Orion 8February 2017 Highlights OrionOctober 2016 Highlights8 March 2017ESD Combined Report

9

GETTING TO MARS VIA SXSWThe journey to Mars took a detour this March as NASA made a pit stop in Austin, TX, to share its exciting missions, discoveries, technology advancements, and plans for future space exploration at the South by Southwest (SXSW) Interactive Festival and trade show.

Thousands of event participants visited the NASA and Lockheed Martin trade show exhibits, which showcased how lunar and Mars missions will evolve with hands-on content and virtual reality interactives to show space enthusiasts how spacecraft are being built and tested for human exploration of deep space.

In addition to showcasing Orion and SLS in the exhibit hall, NASA Astronaut Jessica Meir and the Orion team supported the “So You Want to Go to Mars?” panel discussion and Facebook Live event. The panel was in such high demand that a second encore presentation was scheduled to accommodate a record crowd. Facebook Live was hosted on the NASA Orion Facebook page from the exhibit space. Live views were around 47,000 users during the broadcast, and engagement with the content since the broadcast has continued to grow to over 1,700,000 users.

View the Facebook Live feed: http://bit.ly/LiveAtSXSW

“So You Want to Go to Mars?” panelists NASA’s Astronaut Jessica Meir and Orion engineer Jessica Vos with Lockheed Martin space architect Tim Cichan and Orion thermal protection system lead Brian Hinde.

ESD Combined ReportMarch 2017

More pictures on page 8

1010 OrionFebruary 2017 Highlights OrionOctober 2016 Highlights March 2017ESD Combined Report

SO-CAL SUPPLIERS WELCOME NASA

Representatives from the NASA SLS and Orion programs, Aerojet Rocketdyne, Boeing, Lockheed Martin, and Orbital ATK traveled to Southern California in March to visit supplier companies in the area and conduct public outreach events.

Industry site visits took place at LeFiell Manufacturing Company, AMRO Fabricating Corporation (photo, top left), STADCO (photo, middle left), DASCO, Votaw Precision Technologies (feature photo) and VACCO Industries, which are among the many suppliers throughout Southern California contributing to SLS and Orion mission success and enabling NASA’s return to human exploration of deep space. There are currently more than 3,500 people working at nearly 600 small businesses and companies in the state to help to build SLS and Orion. 

On March 21, members of the SLS and Orion industry team hosted a supplier’s leadership reception at the Cerritos Center for the Performing Arts, followed by a presentation about the Nation’s future space exploration programs. An estimated 900 people attended the event, including congressional staff from Rep. Duncan Hunter’s office (R-CA-50) and Rep. Grace Napolitano’s office (D-CA-32). Former NASA astronaut Brian Duffy and current NASA astronaut Tom Marshburn also talked about their personal experiences in space flight.

Additional stops included presentations at the California Science Center in Los Angeles and Haskell Middle School in Cerritos, CA (photo, lower left).

Read more about NASA’s visit: http://bit.ly/NASA_SoCal

11ESD Combined ReportMarch 2017

ORION SUPPLIERS HONORED FOR OUTSTANDING PERFORMANCETwo of the Orion Program’s subcontractors were recognized with prestigious honors in March for their outstanding contributions to mission success and program support.

Lockheed Martin Orion subcontractor Red Canyon Software, Inc. (photo, upper left) won the Small Business Administration’s Subcontractor of the Year Award for Region VIII. Red Canyon is a HUBZone small business located in Denver, CO, that develops software and technology to help humankind explore space, other planets, and renewable resources on Earth.

The Subcontractor of the Year award honors small businesses that have provided the Government and industry with outstanding goods and services as subcontractors. Small Business Administrator Linda McMahon recognized this year’s Small Business awardees for 16 different categories ranging from exporting, outreach, contracting, lending, disaster recovery, manufacturing, and research and development. Red Canyon has worked with the Orion program since 2006 and was nominated for this award by Lockheed Martin.

On March 14, Lockheed Martin announced ISYS Technologies (photo, lower left) of Littleton, CO, as its 2016 Small Business of the Year for the Orion Program. Lockheed Martin Vice President and Orion Program Manager Mike Hawes presented the prestigious Rigel award to ISYS Technologies owner and CEO Teresa Porter. ISYS Technologies was founded as a woman-owned small business in 2002. It has been an Orion partner since 2009, providing niche skill engineering to all of Orion’s integrated product teams. ISYS was recognized for their years of outstanding service and for their generous support to Orion outreach and advocacy. The Lockheed Martin Rigel award is an annual award given to a small business subcontractor who performs above and beyond its contractual commitments.

February 2017 Highlights HighlightsESD Combined Report

FOLLOW THE PROGRESS OF NASA’S NEW SPACECRAFT FOR HUMAN EXPLORATION:NASA’s Orion Blog . . . . .Blogs.NASA.gov/Orion

Twitter . . . . . . . . . . . . . . .Twitter.com/NASA_Orion

Facebook. . . . . . . . . . . . .Facebook.com/NASAOrion

Flickr . . . . . . . . . . . . . . . .Flickr.com/NASAOrion

Google+12October 2016. . . . . . . . . . . . . .Plus.Google.com/+NASAorion

APRILCrew Module STA Ships to Denver

Launch Abort System HT-11 Test

National Space Symposium in Colorado

Senator Moran Visits JSC

National Aeronautics andSpace Administration

www.nasa.gov

MARCH 2017

SPACE LAUNCH SYSTEMHIGHLIGHTS

SLS ENGINE CONTROLLER GOES FOR A TEST DRIVE

1414

NASA TESTS NEW ENGINE CONTROLLER FOR FIRST SPACE LAUNCH SYSTEM FLIGHTNASA marked a critical milestone March 23 with a test of the first RS-25 engine controller that will be used on the maiden flight of SLS with Orion. The new controller or “brain” has the electronics that operate the engine and communicate with the SLS vehicle. The engine controller unit was installed on RS-25 development engine No. 0528 and test fired for 500 seconds on the A-1 Test Stand at NASA’s Stennis Space Center near Bay St. Louis, MS. Once test data is certified, the engine controller will be removed and installed on one of four flight engines that will help power the first integrated flight of SLS and Orion.Read the full story: bit.ly/2nAO2Qr

CRITICAL TESTING UNDER WAY FOR UPPER PART OF SLS ROCKETA rigorous test series has begun for the upper part of SLS to ensure each structure can withstand the incredible stresses of launch. A 65-foot-tall test stand at NASA’s Marshall Space Flight Center in Huntsville, AL, is being used for the test series, where two simulators and four qualification articles of the upper part of the SLS are stacked and being pushed, pulled and twisted by forces similar to those experienced in flight. Watch the video: bit.ly/2oyVGIK

OrionFebruary 2017 Highlights OrionOctober 2016 Highlights March 2017ESD Combined Report

15

NASA AT SOUTH BY SOUTHWESTAn attendee of the South by Southwest trade show takes a virtual tour of SLS on the launch pad. Approximately 18,000 festival attendees visited the NASA booth during the four-day event.

March 2017 ESD Combined Report

1616

INTERIM CRYOGENIC PROPULSION STAGE ARRIVES AT CAPE

The interim cryogenic propulsion stage (ICPS) for the first flight of SLS is unloaded at Cape Canaveral Air Force Station in Florida. The ICPS is the first integrated piece of SLS hardware to arrive at the Cape and undergo final processing and testing before being moved to Ground Systems Development and Operations at NASA’s Kennedy Space Center. The ICPS was designed and built by ULA and The Boeing Company in Huntsville, AL. More photos on Flickr: bit.ly/2nvXpiT

OrionFebruary 2017 Highlights OrionOctober 2016 Highlights March 2017ESD Combined Report

17

Maury Vander, chief of the Operations Division at NASA’s Stennis Space Center, is ready to make the ground shake in preparation for the first crewed flight of SLS.

Meet Vander: bit.ly/2o8qmEc

SPACE FLIGHT PARTNERS: Houston Precision FastenersHouston Precision Fasteners is a small business that manufactures close tolerance, high-strength critical fasteners for use throughout NASA’s SLS booster motor. The majority of the fasteners are used on the forward skirt assembly. The company also supplies fastener hardware for NASA’s Orion spacecraft, supplying thousands of pieces of precision fastener hardware such as bolts, screws, nuts, and washers.

80EMPLOYEES

Houston, TX

ESD Combined ReportMarch 2017

NASA DAY IN MONTGOMERYSLS took part in “NASA Day in Montgomery,” which recognizes Alabama’s key role in the Journey to Mars. NASA also was honored by the Alabama Legislature with resolutions and proclamations recognizing the Agency’s achievements. The annual event featured interactive displays and other exhibits – like the RS-25 engine pictured – aimed at engaging students in the fields of science, technology, engineering and math (STEM).

GREETINGS FROM CALIFORNIA

SLS was part of a visit to some of the industry partners in California – including LeFiell Manufacturing – to see the work they are doing on the rocket and Orion, and to thank employees. More than 500 companies across California are helping NASA build SLS and Orion.

While in California, representatives from SLS and Orion, as well as NASA Astronaut Tom Marshburn, also visited with students and staff at Haskell Middle School in Cerritos.

FOLLOW THE PROGRESS OF NASA’S NEW LAUNCH VEHICLE FOR DEEP SPACE:Twitter . . . . . . . . . . . . . .Twitter.com/NASA_SLS

Facebook . . . . . . . . . . . Facebook.com/NASASLS

RS-25 engine testing

Engine section test article transport from Michoud to Marshall

Booster center/aft segment cast

COMING UP:

GROUND SYSTEMS DEVELOPMENT & OPERATIONSH I G H L I G H T S

M A R C H 2 0 1 7

2020

FIRST UMBILICAL INSTALLED ON MOBILE LAUNCHER FOR NASA’S SPACE LAUNCH SYSTEM AND ORIONThe first launch umbilical for NASA’s Space Launch System (SLS) and Orion spacecraft was installed on the mobile launcher tower March 16 at Kennedy Space Center. The Orion Service Module Umbilical, or OSMU, was installed high up on the tower at about the 260-foot level.“Installation of the OSMU is a major milestone for the mobile launcher team,” said Sam Talluto, deputy project manager. “This is the first of multiple umbilicals and launch accessories that will be installed.”The tower on the mobile launcher will be equipped with several connections, called launch umbilicals, which will connect to the SLS core stage and twin solid rocket boosters, the interim cryogenic propulsion stage and the Orion spacecraft. They will provide power, communications, coolant and fuel.

The OSMU will connect from the mobile launcher tower to the Orion service module. Prior to launch, the umbilical will transfer liquid coolant for the electronics and purge air/GN2 for environmental control to the Orion service module that houses these critical systems to support the spacecraft. The umbilical also will provide purge air/GN2 for environmental control to the Launch Abort System. Before launch, the OSMU will tilt up and the umbilical lines will disconnect.The first integrated launch of SLS and Orion, Exploration Mission 1, will send the spacecraft to a stable orbit beyond the moon. Orion will return to Earth and be recovered from the Pacific Ocean. The mission will demonstrate the integrated performance of the SLS rocket, Orion, and ground support teams.

OrionFebruary 2017 Highlights OrionOctober 2016 Highlights March 2017ESD Combined Report

21

CRAWLER-TRANSPORTER 2 TAKES TEST DRIVE ALONG CRAWLERWAY

NASA’s upgraded crawler-transporter 2 (CT-2), carrying mobile launcher platform 1, moves slowly along the crawlerway March 22 at Kennedy Space Center. The crawler’s upgrades and modifications were monitored and tested under loaded conditions during its travel to the crawlerway Pad A/B split and back to the crawler yard to confirm it is ready to support the load of the mobile launcher carrying the Space Launch System with Orion atop for the first test flight, Exploration Mission 1. The Ground Systems Development and Operations Program at Kennedy is managing upgrades to the crawler. Photo credit: NASA/Leif Heimbold

NASA’s crawler-transporter 2 (CT-2) took a test drive along the crawlerway at Kennedy Space Center to determine the structural dynamics and loading environments of the crawler’s recent upgrades. The test was performed to ensure that the crawler is ready to support the first integrated flight of the Agency’s Orion spacecraft atop the Space Launch System. The unloaded CT-2 rolled from the crawler yard along the crawlerway to the Pad A/B split for the first leg of the trip and traveled back to the mobile launcher platform park site near the Vehicle Assembly Building. For the loaded test, the crawler picked up Mobile Launch Platform 1 at the park site and returned to the Pad A/B split. Engineers took measurements during the entire trek using accelerometers, strain gauges, and pressure transducers. The data collected will be used to validate the dynamic model of the integrated SLS. CT-2 is the vehicle that will carry the SLS rocket and Orion spacecraft on the mobile launcher to Pad B for launch. The behemoth vehicle recently was upgraded to support the heavier load of the SLS atop the mobile launcher. Upgrades to the crawler included installation of new generators, gear assemblies, jacking, equalizing and leveling (JEL) hydraulic cylinders, roller bearings and brakes. Other systems also were upgraded. The Ground Systems Development and Operations Program is overseeing upgrades to facilities and ground support equipment necessary to support the launch and deep space missions, including the Journey to Mars.

ESD Combined ReportMarch 2017

2222

NEW GROUND LAUNCH SEQUENCER SOFTWARE DEMONSTRATED IN LAUNCH CONTROL CENTER

NASA engineers and test directors gather in Firing Room 3 in the Launch Control Center at NASA’s Kennedy Space Center in Florida, to watch a demonstration of the automated command and control software for the agency’s Space Launch System and Orion spacecraft. In front, far right, is Charlie Blackwell-Thompson, Exploration Mission-1 launch director. Photo credit: NASA/Bill White

A demonstration of the automated command and control software for NASA’s Space Launch System (SLS) rocket and Orion spacecraft recently took place in Firing Room 3 in the Launch Control Center at the Agency’s Kennedy Space Center in Florida. The software, called the ground launch sequencer, will be responsible for nearly all of the launch commit criteria during the final phases of launch countdowns.

The Ground and Flight Application Software Team, or GFAST, demonstrated the software for Charlie Blackwell-Thompson, launch director for the first integrated flight of the SLS and Orion spacecraft. Also attending were representatives from the NASA Test Director’s Office.

The software is in the advanced stages of development. It includes nearly all of the core capabilities required to support the initial use during Ignition Over-Pressure/Sound Suppression and follow-on tests through launch of the Agency’s SLS rocket and Orion spacecraft. The suppression stage ensures the water dampening system initiates in the final second of launch countdown. It also produces the pattern and volume needed to dampen the pressure waves and acoustic environment caused by the firing of the SLS core stage RS-25 engines and solid rocket motors.

“We were pleased to be able to demonstrate the continued evolution of the ground launch sequencer for members of the launch team, and look forward to its first use in operations support,” said Alex Pandelos, operations project engineer for Launch Integration in the Ground Systems Development and Operations Program (GSDO).

The software was developed by GSDO’s Command, Control and Communications teams at the Center. Development of the software will continue, with a goal of beginning verification and validation of the software in summer 2017.

OrionOrionMarch 2017ESD Combined Report

23

PNEUMATIC SYSTEMS TESTED IN MULTI-PURPOSE PAYLOAD FACILITY FOR ORIONTesting of systems critical to preparing Orion for its first flight atop NASA’s Space Launch System rocket were successfully completed in the Multi-Payload Processing Facility (MPPF) at Kennedy Space Center. The MPPF is the location where fuel and commodities will be provided for the Orion spacecraft prior to launch. Orion also will be defueled and prepared for its next mission in this facility. Engineers and technicians completed a series of verification and validation tests of the pneumatic systems inside and outside the facility and confirmed they are ready to become operational, and that the systems meet requirements to support flight and ground systems that use pneumatic commodities. “Completion of verification and validation testing of the pneumatic systems helps ensure that ground systems at Kennedy are ready to support Orion spacecraft processing,” said Stephen Anthony, pneumatic design engineering lead in the Environmental and Life Support Systems branch in the center’s Engineering Directorate. Four pneumatic systems supply high pressure gases to various locations in the MPPF. These include gaseous nitrogen, gaseous helium and gaseous oxygen. They will be used to pressurize flight tanks on the Orion spacecraft. Another system, the breathing air system, provides an air source for personnel

using Self-Contained Atmospheric Protection Ensembles, or SCAPE suits, which protect them during hazardous operations inside and outside the facility. Leak tests of all of the pneumatic hardware installed inside and outside the MPPF were performed. Checkouts included verifying proper function of valves, regulators, pressure gauges and other components; verifying that the systems can be operated by command and control software; and performing flow tests of the systems to validate analysis and demonstrate that the systems meet requirements. A simulation of Orion flight tank fill operations also was performed. “The pneumatic systems at the MPPF provide high pressure gases to many other ground and flight systems, making them vital to successful ground processing operations,” Anthony said. The vast majority of the testing was completed between August 2016 and January 2017. Additional testing is scheduled this spring. A team of about 60 NASA and contractor workers supported the tests, including design, operations, systems and project engineers, mechanics, technicians, logistics, safety, quality, configuration management, and construction of facilities personnel.

Engineers and technicians completed verification and validation testing of several pneumatic systems inside and outside the Multi-Payload Processing Facility (MPPF) at NASA’s Kennedy Space Center in Florida. In view is the service platform for Orion spacecraft processing. The MPPF will be used for offline processing and fueling of the Orion spacecraft and service module stack before launch. Orion also will be de-serviced in the MPPF after a mission. The Ground Systems Development and Operations Program (GSDO) is overseeing upgrades to the facility. The Engineering Directorate led the recent pneumatic tests. Photo credit: NASA/Kim Shiflett

ESD Combined ReportMarch 2017

2424

GROUND SYSTEMS SPOTLIGHT - CRAIG DANIELS

Craig Daniels is a ground support equipment structural analyst with SGT on the Engineering Services Contract, supporting the Ground Systems Development and Operations Program. His main responsibilities include ensuring that the ground support equipment (GSE) is strong enough to perform its intended function and to provide suggestions to resolve problems as the products are developed. A recent accomplishment was seeing the SLS vehicle stabilizer umbilical arms installed at the Launch Equipment Test Facility. “I am really excited to see the retract, or drop, testing that will happen here in a couple of months,” Daniels said. Daniels has worked at Kennedy for 13 years. He began his career in 2001 as a University of Central Florida (UCF) co-op student for Sunbelt Engineering during construction of the Atlas V launch complex. After graduating from college, he was hired by Boeing and worked as a Space Shuttle mechanisms engineer at the NASA Shuttle Logistics Depot in Port Canaveral. “I was hired during Return to Flight efforts after the Columbia accident, so there was a lot of non-routine maintenance going on and some new mechanisms were being built for the new inspection boom in the payload bay,” Daniels said. Memorable experiences include sitting on console at Johnson Space Center in Houston for some launches, and once,

getting to declare “Mech is GO” for his mechanical group during the launch director’s poll of the systems for launch. He also had the opportunity to board space shuttles in the Orbiter Processing Facilities, and go into the White Room and shuttle payload bay when it was at the launch pad. As the Space Shuttle Program ended, he moved into a career as a GSE structural analyst with Boeing on the Checkout, Assembly and Payload Processing Services contract and worked with the GSE group to design the servicing stands that will be used to process the Orion capsules in the Multi-Purpose Processing Facility. Challenges in his current position include attention to detail on tight schedules, interpretation of requirements and codes that can be difficult to understand, and tedious technical report writing followed by even more updates and rewriting. Daniels first became interested in space in grade school when his family came to the Kennedy Space Center Visitor Complex during summer vacation. “I never really considered a career in space until my calculus teacher at Louisiana State University suggested it when I told him that I didn’t know what I wanted to do with my new math skills,” Daniels said. “He just threw it out there as something that was possible, and I latched onto the idea immediately.” Daniels considers his hometown Metropolis, IL. He earned a Bachelor of Science in aerospace engineering from UCF in 2004. His advice to students interested in a career similar to his is to make a goal and work toward it. “I would tell students to work at their own pace and learn the core engineering and physics principles well. Get a summer co-op job. Keep learning about the things that interest you and always look for good opportunities that will help you meet your goals and keep you employed when things change,” Daniels said. His first car was a 1976 Chevrolet Monte Carlo, medium blue metallic with a white “landau” vinyl top and rally wheels. “I really wanted a classic Camaro, Mustang or Charger, but the Monte Carlo was nice,” Daniels said. Daniels has been married for 17 years to his wife, Aletha. They have a daughter, Hannah, 11, and a son, Thomas, 10. The family pets include a cat named Kitty Cat Cream who likes short walks and long naps, and a convicted ankle-biting Chihuahua named Wiggles. Daniels’ hobbies include watching his kids play sports, working on old cars, building furniture, mowing the grass when it’s cool, flying kites, and building cheap model airplanes and Estes rockets.

OrionFebruary 2017 HighlightsOctober 2016 Highlights OrionMarch 2017ESD Combined Report

25

GROUND SYSTEMS SPOTLIGHT - ALLISON MJOEN

Allison Mjoen is an integration engineer with Jacobs on the Test and Operations Support Contract (TOSC) supporting the Ground Systems Development and Operations (GSDO) Program at Kennedy Space Center. Mjoen’s support focuses on Orion requirements development. She is responsible for integrating the requirements between the hardware provider (Lockheed Martin) and the TOSC systems engineers. She ensures that the operational requirements are not only correct, but also executable. “So far I am most proud of the Space Flight Awareness Honoree Award I received in 2016 in recognition of the support I provided to ISS payload customers,” Mjoen said. She has worked at Kennedy for 10 years. She started in 2007 as a flight crew systems engineer with United Space Alliance, where her primary responsibilities were to test, maintain, and stow/destow

mission critical crew systems hardware. These included seats, pressure suits, locker and stowage bags, crew accommodations, and crew survival equipment in support of the Space Shuttle Program. “Before GSDO, I supported the International Space Station Program as a payload integration engineer for Jacobs,” Mjoen said. “I represented principal investigators selected through peer review with their experiment payload design, development and implementation on the space station.” One of the biggest challenges of her job is effective communication. “It is impossible to be an expert on each Orion system. Instead, it is important to know the right system experts to reach out to, obtain key information, and convey it accurately,” Mjoen said. When did she first become interested in space? Mjoen said it was in elementary school when her class started learning about weather and space. “I couldn’t believe that we had people living in space, and I wanted to learn how that was possible,” Mjoen said. Mjoen has lived in Orlando for 13 years. But she also has lived in Blue Earth, MN (where she was born); Naples, FL; and Sewanee, TN. She earned a Bachelor of Science in aerospace engineering in 2009 from the University of Central Florida. The advice Mjoen would give to students who are interested in a career similar to hers is: “Be resolute in your decision to pursue engineering. You are smart enough and don’t let anyone convince you otherwise.” Mjoen has been married to her husband Pete for five years. They have one son, Elijah, who is four months old. She says one of the biggest challenges of working and having a newborn is planning ahead but remaining flexible. “Each day is a little different and often unpredictable,” Mjoen said. Her first car was a 1994 Ford Tempo. It was teal green and had automatic seat belts. Some of Mjoen’s interests include traveling, hiking, and spending quality time with her family and friends.

ESD Combined ReportMarch 2017

2626

Regina BrittonProgram Analyst Lead, Ground Systems Implementation Business Office

Regina Britton is a program analyst in the Ground Systems Development and Operations Program at Kennedy Space Center. Her official title is lead for the Ground Systems Implementation (GSI) Business Office. Britton’s main responsibilities include managing the budget and schedule for the GSI Division of the GSDO Program.

“The part of my job I like the most is being involved in so many parts of the GSDO Program. I have learned so much about the program as I plan and execute the budgets of the various elements of GSDO. I feel I have a first-hand seat to see all of the cool stuff going on,” Britton said.

She is very proud of all that GSI has achieved in such a short amount of time. “It is amazing to see so many things are complete or very near

completion. It’s exciting to think how close we are to being done with development and moving toward our first launch of the Space Launch

System rocket with Orion,” Britton said.She started working at Kennedy in 1990 with McDonnell

Douglas on the Payloads and Ground Operations Contract. She worked on that contract for 13.5 years, and then transitioned to Analex on the Expendable Launch Vehicles Integrated Support contract. After working there for five years, she moved to Abacus Technology on the Information Management and Communication Support (IMCS) contract.

In 2011, 21 years into her career, she became a civil servant working for NASA. She came directly to the business office supporting GSDO.

“I feel I landed in the best place at Kennedy Space Center. I wouldn’t want to be working anywhere else,” Britton said.

She first became interested in space when she was very young. She grew up around aviation all of her life. “My family owned

a small private airport. To my family, aviation and space was the coolest. To think I now work for NASA is beyond my belief and I feel so

privileged,” Britton said.Her hometown is Milton, FL. She earned a Bachelor of Science in

business administration in 1982 from Troy University in Troy, AL.The advice she would give to students interested in pursuing a career

in a field similar to hers is that business administration is a wonderful area to study. “It will open you up to a number of different career options, not limiting you to one thing,” Britton said. “As a business analyst, you will find yourself at the heart of the organization, which is an exciting place to be.”

Her first car was a 1982 white Chevrolet Cavalier, which she says back in the day was a cool car.

She has been married to her husband, Keith, for 27 years. They have a 23-year-old son, Spencer, and a 21-year-old daughter, Sarah. Sarah was born in a Kennedy Space Center ambulance.

“She received a special Payload Delivery Award and a permanent Kennedy badge when she was two weeks old,” Britton said.

They have a Labradoodle named Cali, that Britton says is the best dog ever. Her hobbies include running and gardening.

GROUND SYSTEMS DEVELOPM

EN

T &

OPER

ATIO

NS

F A C E S O F G S D O

OrionFebruary 2017 HighlightsOctober 2016 Highlights OrionMarch 2017ESD Combined Report

Program Analyst Lead, Ground Systems Implementation Business Office

FOLLOW THE PROGRESS OF NASA’S GSDO PROGRAM:NASA GSDO Blog .......................... blogs.nasa.gov/groundsystems

Twitter .......................................... twitter.com/nasa_go4launch

Facebook ...................................... facebook.com/NASAGOforlaunch

National Aeronautics and Space Administration

John F. Kennedy Space Center Kennedy Space Center, FL 32899

www.nasa.gov

A long-exposure view of the mobile launcher at NASA’s Kennedy Space Center in Florida. Cranes and rigging were used to lift the bracket for the Orion Service Module Umbilical (OSMU) up for installation on the mobile launcher tower on March 13. The tower will be equipped with a number of lines, called umbilicals, which will connect to the Space Launch System rocket and Orion spacecraft for Exploration Mission-1. The OSMU will be located high on the mobile launcher tower and, prior to launch, will transfer liquid coolant for the electronics and air for the Environmental Control System to the Orion service module that houses these critical systems to support the spacecraft. The Ground Systems Development and Operations Program is overseeing installation of the umbilicals. Photo credit: NASA/Cory Huston

Check out the GSDO 2016 Year in Review at

http://go.nasa.gov/2lT52Pe

.