QSM & QSM-ID Series: For 1.5-3” I.D. Material Lines Quick Select Manifold Station with optional auto id

103

CO

NV

EY

Expandable manifold directs multiple materials to multiple destinations.

Auto lock connection.

Auto ID proofing option ensures that material moves from correct source to the intended destination.

• Optional Auto ID of Material Source and Destination Adds manifold isolation and remote I/O ensuring reliable electronic verification of the selected connection via compatible Novatec central conveying control panel.

• Auto Purge of Material Lines The upright manifold design enhances material flow, and promotes improved purge performance when used with source valve.

• Modular, Expandable Design Each module accommodates up to two 6-position manifolds (12 connections) for 1.5”-2”O.D. lines or two 5-position manifolds (10 connections) for 2.5”-3”O.D. lines. Up to 4 modules can be combined per QSM assembly-modules and full assemblies can be added as needed.

• Auto-Lock Connections Simple lance-style material line couplers are easier to use than bayonet connections. Material lines are automatically locked into position by source line cover for quick and easy source selection and positive vacuum seal.

Exclusive Novatec Auto ID technology option for material verification and validationA low voltage signal registers each time a material hose is connected to a material supply manifold. If that signal does not match the infor-mation preprogrammed into the system controller, a material mismatch alarm sounds, and the material will not convey.

Attractive cabinet design with interlocking panels encloses fantail manifolds accommo-dating a range of material line diameters.Material names can be clearly marked on the cabinet face.

104

Typ. 5-Position FantailTyp. 6-Position Fantail

Typ. 4-Position FantailTyp. 2-Position Fantail

4” Plastic Plug Typ. in unused holes

Typ. 1-Position FantailFantail ManifoldP/N asfm-x-xx

Fantail CabinetP/N asfc6-x-f

Typ. 3-PositionFantail

8.50

7.50Typ.

Typ.

33.7740.80

* 61.55

16.0032.00

48.0064.00

2.00 O.D.

2.63

*Deduct 5” from height for mezzanine mount cabinet

Mezzanine Mount - Fantail Cabinet Part Numbers

Fantail Manifold Part Numbers

The number of positions used per manifold can be varied by row.

Number of Cabinets in Group

5-Position/row Cabinets*

6-Position/row Cabinets*

Group of 1 asfc5-1 asfc6-1Group of 2 asfc5-2 asfc6-2Group of 3 asfc5-3 asfc6-3Group of 4 asfc5-4 asfc6-4

1.5” DiameterManifolds

2” DiameterManifolds

2.5” DiameterManifolds

3” DiameterManifolds

asfm-6-15 asfm-6-20asfm-5-15 asfm-5-20 asfm-5-25 asfm-5-30asfm-4-15 asfm-4-20 asfm-4-25 asfm-4-30asfm-3-15 asfm-3-20 asfm-3-25 asfm-3-30asfm-2-15 asfm-2-20 asfm-2-25 asfm-2-30asfm-1-15 asfm-1-20 asfm-1-25 asfm-1-30

Part number

asfc5-1

Cabinet with 5

positionsper row(2 rows)

Numbercabinetsin group(max 4)

asfm-6-15

FantailManifold

Number of positions

permanifold

15=1.5”20=2.0”25=2.5”30=3.0”

Part number

ManifoldDiameter

Floor Mount: - Fantail Cabinet Part Numbers add -f to above part numbers

6 position rows accommodate 1.5” or 2” manifolds.

NOTE: Order the quantity of each manifold required for total installation.

Floor Mount Fantail Cabinet:

NOTE: Order groups of manifold cabinets to match the requirements for manifolds.* 5-position rows accommodate 2.5” or 3” manifolds.

Block-Off Kits: (plastic covers for complete manifold position)Part # asfc5-BlankPart # asfc6-Blank

Top-View

Front-View

Side-View

104A

CO

NV

EY

Open Frames - Mezzanine Mount (56.5” high)

Open frame models available.

Auto ID Control recognizes any mismatch of source to destination and blocks material transfer.

Material and destination names can be clearly marked to help avoid errors.

Option:*Auto ID of Materials: (Requires programming of Novatec control)

Add -ID to fantail manifold part numbers

For FlexNet and FlexXpand Controls: Destination outputs (16) Part# FXM-0-16 (maximum 8 each) Source inputs (16) Part# FXM-16-0 (maximum 4 each)For FlexNet MCS-696 control: Destination outputs (48) PN# 08-0102 Source inputs (32) Part# 08-0103-32 (maximum 1 each) Source inputs (16) Part# 08-0103-16 (maximum 2 each)

Frame Width 5-Position/row Frames*

6-Position/Manifold Frames*

2 Manifolds asff5-2 asff6-24 Manifolds asff5-4 asff6-46 Manifolds asff5-6 asff6-68 Manifolds asff5-8 asff6-8

Part number

asff5-2

Cabinet with 5

positionsper row(2 rows)

Number of

manifoldsin group(max 8)

* 5-position rows accommodate 2.5” or 3” manifolds. 6 position rows accommodate 1.5” or 2” manifolds.

Accessories:Floor Mount Accessories: Short radius bends Diverter Y + Bend (2 manifolds to 1 source)

Part # tsse1596 1.5” O.D., SS, 90° 6” CLR Part # asfm-d-15 1.5”, O.D., SS, 90° 2.5” CLR

Part # tsse2096 2.0” O.D., SS, 90° 6” CLR Part # asfm-d-20 2.0”, O.D., SS, 90° 2.5” CLR

Part # tsse2596 2.5” O.D., SS, 90° 6” CLR 2.5”, N/A

Part # tsse3094 3.0” O.D., SS, 90° 4.5” CLR 3”, N/A

Machine Drops: Male connections

Part # asMHC15 1.5” O.D. Part # asMHC25 2.5” O.D.

Part # asMHC20 2.0” O.D. Part # asMHC30 3.0” O.D.

*Auto ID requires flex hose with static wire. Maximum material temperature = 250°F. Purge required for temperatures exceeding 180°F.

16 Material Destination Connections

16 Manifold ConnectionsFor Proofing

Up to 4 modules

Up to 8 modules

FXM-0-16(24 VAC)

FXM-16-0(24 VAC)

NovaNet

NovaNet Module

Part# 08-0103-32 (Maximum 1 each)Part# 08-0103-16 (Maximum 2 each)

MAT’lSOURCE

MAT’l DESTINATIONDeviceNet

Allen-BradleyMCS-696

DestinationOutputs

(48)24 VAC

DestinationInputs

(16 or 32)24 VAC

All information in this bulletin is subject to change without notice. © 2011 NOVATEC, Inc. All rights reserved Form #QSM 201101

222 East Thomas Avenue Baltimore, MD 21225 USA Phone: 410-789-4811 • Fax: 410-789-4638 • 1-800-BESTDRY (800-237-8379) • sales@novatec.com • www.novatec.com

104B

Material verification and validation is becoming more important to processors. Auto ID allows inputting of desired material source and destination informa-tion into the control, but the correct connection must be confirmed by the (op-tional) proofing connections at the manifold, or an alarm signal is generated and loading is not permitted.

The FlexXpand and the FlexNet Controls use FlexXpand modules to increase Auto ID sources and destinations by up to: *120 Total Material Destinations 64 Total Material Sources

See Options page 104A

DeviceNet modules allow Auto ID sources and destinations of up to : 48 Total Material Destinations 32 Total Material Sources

See Options page 104A

Add Auto ID Option easily with FlexXpand™ or FlexNet™ Distributed I/O Control

MCS-696 Allen-Bradley Control SystemDeviceNet is used much in the same way as

NovaNet (above) to control Auto ID feature.

*Maximum number of stations