excavator 44 45no. 13616 (5 ea.) size / 200mm *tip outside diameter / ø0.6mm cleaning brush s...
TRANSCRIPT
ExcavatorFilling InstrumentComposite SyringeAmalgam ProductMatrix Retainer / SeparatorContact ProtectorApplicatorRubber Dam ProductEndodontic ProductFiber Cutter
38404444454546475058
3737
39393838
-CDR Type-2-
*Material / Si (Color Ring)
*The edge along with the circle at a tip remove softened dentin and make cavity preparation efficiently.
Str. #1 / Cvd. #1
Str. #2 / Cvd. #2
Str. #3 / Cvd. #3
Description #1 #2 #3 #4L
Str. Cavity preparation for wall and floor.
01605 01606 01607 01608
Cvd.Used for undercut area, narrow rim of an opening and at the cavity angle.
01705 01706 01707 01708
-Round Tip Type-2-
*Material / Si (Color Ring)
1.1m
m1.
5mm
2.0m
m
*Excavator which pursued minimal intervention.
Str. #4L / Cvd. #4L
2.0mm
1.3mm
0.9mm
#1No. 01714
#2No. 01715
#3No. 01716
0.7m
m
Excavator
Efficient Sanitary Complete removal
Point1 Point2 Point3
300°300° wide edge allows efficiently removal of cavity dentine.
Slope working part design allows easy clean of particles.
Carious dentin which is contiguous to dental enamel can be removed without breaking the dental enamel.
Cavity
Cavity#1・#2 #1・#2 #3
*The minimum spoon is effective for micro cavity preparation.*The long shank is designed so it doesn't obstruct the view under microscope.
*The reason why "spoon excavator" doesn't have the risk of excessive excavation.
Dentin
Dentin
Dental enamel
Dental enamel BreakagePear
Shaped
ø2.0mm
ø2.5mm
ø3.5mm
ø3.0mm
ø3.5mm ø3.5mm
ø2.0mm
ø2.0mm
ø2.5mm
#1No. 03001
#6No. 03006
#7ANo. 03015
#13No. 03013
SSW #2No. 03102
#14No. 03014
#4No. 03004
#14ANo. 03016
#13ANo. 03017
#9No. 03009
#7No. 03007
*For efficient filling to proximal, thickness at the tip is thin.
AnteriorNo. 03231
PosteriorNo. 03232
No. 03241
Plastic Filling Instrument
Cement Filling Instrument
Proximal Filling Instrument
-DLC-*Diamond Like Carbon Coating
#1Filling
No. 03381
#2Filling / Carving
No. 03382
#3Filling / Carving
(Mesial and distal of posterior teeth)No. 03383
#4Filling / Carving
(Labial region of anterior teeth)No. 03384
#5Carving
(Pit-and -fissure / Occlusal surface)No. 03385
#6Filling
(Occlusal surface)
No. 03386
*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.
ø1.5mm
ø1.0mm
ø3.5mm
ø2.5mm
ø3.5mm
ø2.2mm
*Thickness / 0.2mm (#2, #3, #4)
#CP3No. 03333
*Teflon Coating
#CP4No. 03334
*Teflon Coating
DLC #2ANo. 23425
*Diamond Like Carbon Coating
DLC #2BNo. 23426
*Diamond Like Carbon Coating
*Thickness / 0.2mm
Composite Filling Instrument Tip (Replaceable Type)
P-A (ø8mm)No. 10201
P-F (ø6mm)No. 10205
P-B (ø8mm)No. 10202
P-C (ø6mm)No. 10203
*Remove all joint parts and replaceable tip before sterilization and disinfection.*For more replaceable type products see P. 201.
-Handle-
-Tip (3 ea.)-
Composite Filling Instrument
41414040
-TMDU 2 (Tokyo Medical Dental University)-
*Thickness / 0.2mm (#1)0.1mm (#2)
*Material / Si (Color Ring)
*Diamond Like Carbon Coating*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.
ø0.9mm
ø3.2mm
ø1.6mm
#1 BlueFilling / Carving
No. 03341
#2 GreenFilling / Flowable regin applying
No. 03342
#3 RedFilling / Carving
No. 03343
#4 SilverRemoval of surplus resin
(Proximal area / Margin area)No. 03344
-TMDU 3 (Tokyo Medical Dental University)-
ø1.5mm
ø0.9mm
ø2.5mm
*Thickness / 0.1mm (#1 & #3 Left)0.2mm (#3 Right)
*Diamond Like Carbon Coating*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.
*Sharp knife edge cuts burr on interproximal areas.
#1Red
[ Contact surface of tooth ]Excellenty thin tip allows
approach narrow proximal area.
[ Anterior lavial side ]Inside curved part is for cervical
area and outside one is for incisal area.
#4 White
[Margin]Remove with scraping
surplus resin after cured.
#3Green
[ Molar occlusal side / Anterior lingual side ]
For Class I cavity, fill cavity wall and cavity floor without bubble.
[ Molar occlusal side ]Adjust shape after filling.Efficient for lingual side of upper central incisal too.
#5Yellow
[Molar occlusal side]Make pit part.
[Molar occlusal side]Form occlusal ridge.
#2Blue
[ Molar occlusal side ]For pit and fissure.
[ Premolar lavial side ]Curved neck part allows it easy to approach over lip.
#4Silver
[Margins]Remove with scraping surplus
resin after cured.
#2Green
[ Cavity Floor /Molar occlusal side ]
Fill flowable resin into tiny cavity.Form occlusal ridge.
[ Molar occlusal side /Anterior lingial side ]
Fill big pit.
#3Red
[ Far end of last molar ]Excellent angle for
approaching,filling distal end of the last molar.
[Anterior lavial side]Inside curved part is for cervical
area and outside one is for incisal area.
#1Blue
[Molar occlusal side / Anterior lingual side]
Fill cavity wall and cavity floor without bubble.
[ Molar and Carrying resin ]Fill molar part and adjust shape
of rejin,carry rejin.
43434242
#1 RedFilling / Carving
No. 03391
#2 BlueFilling / Carving
No. 03392
#3 GreenFilling (Class 1 cavity) / Carving (Occlusal surface)
No. 03393
#4 WhiteRemoval of surplus resin
(Proximal area / Margin area)No. 03394
#5 YellowCarving
(Occlusal surface)No. 03395
*Forming ridge and occulusal fossa.
*Effective design for filling of class 1 cavity wall and line angle.
*Sharp knife edge cuts burr on interproximal areas. *Cavity floor
Composite Filling Instrument
No. Description
13255 Main Body L
13256 Main Body S
13188 Nozzle & Plug L (100 ea.)
13190 Nozzle & Plug S (100 ea.)
13193 Nozzle & Plug L (500 ea.)
13194 Nozzle & Plug S (500 ea.)
L : Main body L / Nozzle & Plug L (100 ea.)S : Main body S / Nozzle & Plug S (100 ea.)
*Material / PPS (Black part)
Nozzle & Plug S(Plug / Green)
Nozzle & Plug L(Plug / Blue)
Main Body
LNo. 13251
SNo. 13252
No. Description
13171 Main Body
13172 Band (10 ea.)
No. 13170
Thickness / 30μm
SNo. 05002
Round HandleNo. 07100
Contents Contents
Individual Parts
Individual Parts
No. 13175 Anterior
Posterior
*Thickness / 50μm*Not sold separately.
*Protect adjacent tooth during the cavity cutting.
ElliotPosterior
No. 13162
IvoryAnterior
No. 13161
Anterior (10 ea.) / Posterior (10 ea.)
*It is used after letting froth pass in a hole.
- How to use -*Stainless Steel Contents
45454444
Main body / Band (10 ea.)
Crown part
Dental neck part
1) The both ends of a matrix retainer band are united and made a ring.
2) The matrix retainer band which became a ring is inserted in a matrix retainer and a fixed screw is tightened.
3) Apply to the target tooth and tightened adjustable screw.
- How to use -
Fixed Screw
Upper Right / Lower Left
Upper Left / Lower Right
Adjustable Screw
Adapter
PlugNozzle- How to use -
*Resin of necessary quantity is filled in a nozzle, and a plug is inserted in and it is used by equipping into Syringe.
Composite Syringe Type-2
Amalgam Carver
Matrix Retainer Set
Amalgam Burnisher
Separator
Contact Protector Set
No. Description Shape
08526 #26 Upper molars A
08501 #201 Upper molars A
08556 #56 Lower molars A
08502 #202 Lower molars B
08506 #206 Premolars A
08507 #207 Premolars B
08527 #26A Premolars B
No. Description Shape
08510 #210 Anterior teeth B
08511 #211 Anterior teeth B
08560 #DR Lower first deciduous molar right A
08561 #DL Lower first deciduous molar left A
08512 #12A Lower molars / Wisdom teeth B
08513 #13A Lower molars / Wisdom teeth B
#210 #211 #DR #DL
#206 #207 #12A #13A
#201 #26 #202 #56
#26A
*#12A / 13A → Serrated jaws and offset jaw height provides stability to partially erupted teeth.*#26 / #26A → Used in pedodontic. In that case, #26 is for deciduous molars and #26A is for deciduous anterior teeth.
BoardNo. 08258
No. 25015
ø1.5mm
1.1mm
ø2.5mm
2.5mm
ø1.5mm
1.1mm
ø2.5mm
2.5mm
F-B #3No. 03203
F-B #4No. 03204
F-B #4No. 03214
F-B #3No. 03213 -Clamp shape-
Fit on gingival margin. (Grasp part curves downward)
Gum is not pressed.(Grasp part is flat)
A
B
Size / W132 x D87mm
*Stainless Steel -Round-
-Octagonal-
- How to use -
47474646
Lining Applicator
Ball-Pointed Applicator
Rubber Dam Clamp
No. 08591
*Material / Si (Green part)
AdultNo. 08101
ChildNo. 08102
Size / W98 x D90mm
Size / W89 x D70mm
Rubber Dum Clamp / Board / Rubber Dam Punch Type-2 / Clamp Forceps YS / Young Frame for Adult / Sterilization Case
Sterilization CaseNo. 24052
YSNo. 08121
BrewerNo. 08120
Hole diameter / ø0.75mmø1.00mmø1.50mmø1.70mmø2.00mm
No. 08111
*Size / 165mm
*Size / 175mm
*Size / 165mm
49494848
Contents
Individual Parts
Rubber Dam Punch Type-2
Clamp Forceps
Young Frame
Rubber Dam Kit Type-2
*Storage capacity / 8 reamers and files*Size / W74 x D10 x H52 mm *Material / POM*Sterilizable with liquid sterilizing solutions.*Product does not include reamers and files.
No. Description
08431 Yellow
08432 Orange
08433 Pink
08434 Blue
08435 Green
*Can be arranged "Reamer Guard" by reamer or file type and size.*Cover will not allow the reamers and files to fall out.*An Engine reamer can be stored with "Bur Guard".
-Holding length-
Up to 12mm
Up to 31mm
*Able to connect each "Reamer Guards".*The cover becomes a stand. *Has a built in gauge to measure stop positions during root canal treatments.
No. 08415
*It is ideal for managing reamers and files for every patients.*Can be autoclave or ultrasonic cleaning with reamers and files.*Lid does not allow reamers and files to fall out.
*Has a build in ruler.
*Storage capacity / 11 reamers and files*Holding length / From 21 to 31mm*Size / W48 x D43 x H47mm*Material / PP (Green part)*Product does not include reamers and files.
*Size / ø45 x H36mm*Product does not include reamers and files.
No. 08423
*During the treatment, can be cleaned reamers and files by paper.
*Set 2 sheets to stabilize reamers for cleaning.
Paper No. 08422(300 sheets)
Contents
Individual Parts
51515050
Reamer Guard Reamer Stand-Safety-
Main Body / Paper (100 sheets)
Clean Pot
Str.No. 13615
Cvd.No. 13617
*Material / PFA (Main body)PP (Trigger)
ø11mm Tapered
ø10mm
*The inside of a root canal is dried by an air current with suction in a root canal.
*Because of drying by an air current, it also becomes saving of a paper point.
Contents
Distal
No. 13150
No. 08064
*Excellent for use in hard-to-reach posterior teeth.*Applicable for root canal treatment of both mesial and distal.
Mesial
No. 21155
4cmNo. 21151
No. 21154 Front side Back side
for Root Canal Therapy #16No. 01316
3ml. Type-2No. 13228
53535252
Main Body / Joint (ø10mm & ø11mm Tapered) / Nozzle (5 ea.) / Cleaning Wire
AdapterNo. 13614
*In case the inside diameter of evacuation tube is 16mm, this adaptor is needed for the use of Evacuation Tip Universal.
*Material / PTFE
NozzleNo. 13616(5 ea.)
Size / 200mm
*Tip outside diameter / ø0.6mm
Cleaning Brush S (ø4mm) No. 13651(12 ea.)
Endodontic Aspirator Type-2
Individual Parts
Sold Separately
Broach Holder
File Holder Type-2
ScaleFinger Ruler
Endodontic Gauge
Cleaning WireNo. 90341
Irrigating Syringe
Explorer
Str.Anterior
No. 18910
*For removal of reamers and files deeper within rood canal.*The tip has a groove to securely hold residual reamer or file.
*Assures firm grip of residual reamer or paper point in root canal.
Cvd.Posterior
No. 18911
MiniNo. 24017
No. 08063
*Size / W91 x D42 x H13mm*Material / Si (Green part)*Product does not include main and accessory points.
*Can be autoclave with points.
0.7m
m
#1No. 11311
#2No. 11312
#3No. 11113
with LockNo. 11316
BeachNo. 11117
Size / 160mm
Size / 160mm
Size / 160mm
Size / 170mm
Size / 161mm
Sleeve (2 ea.) / Gauge (2 ea.)Contents
*Suitable for root canal treatment, accurate examination before placing an implant, checking of calculus quantity and its area.
No. 21157
Sleeve Gauge(1mm by 1mm with hold line every 5mm) - How to use -
*Size / W38 x D48 x H8.5mm (Sleeve)W33 x D45mm (Gauge)
*Material / Si (Sleeve)
X-Ray Gauge
55555454
Gutta Percha Case
Root Forceps Endodontic Tweezers
Stieglitz Root Forceps
#1No. 08026
#2No. 08027
#3No. 08028
*Combination of heat cutter and plugger makes cutting and compacting of extra gutta percha easily.*Heat cutter is designed with a metal heat retention bulb for longer working time.
Heat retention bulb
#2No. 08022
#1No. 08021
#3No. 08023
#1No. 08031
#2No. 08035
ø1.0mm
ø1.0mm
#2Upper
No. 08012
S
L
#0.25SNo. 08032
#0.4SNo. 08033
*Since an elastic metal is used, the root canal which is curving can also be pressurized in accordance with a root wall.
#0.4SNo. 08002
#0.4LNo. 08005
#0.6SNo. 08003
#0.25SNo. 08001
#0.25LNo. 08004
#1 Anterior
No. 08011
*Superelastic Alloy
ø0.25mmø0.4mmø0.6mm
ø0.4mm
ø0.25mmø0.4mm
#0.25SNo. 23551
#0.4SNo. 23552
23m
m
28mm
ø1.3mm
ø1.0mm ø0.7mm
ø1.5mm
ø1.0mm ø0.5mm
ø2.0mm
ø1.3mm
*Heat Cutter*Plugger
Tapered / 3%
Tapered / 3%
Tapered / 3%
-Ultra-
-with Heat Cutter-
P-A (ø8mm)No. 10201
P-F (ø6mm)No. 10205
P-B (ø8mm)No. 10202
P-C (ø6mm)No. 10203
*Remove all joint parts and replaceable tip before sterilization and disinfection.*For more replaceable type products see P. 201.
-Handle-
-Tip (3 ea.)-
-Round-
-Octagonal-
#1-2No. 08030
#3Lower
No. 08013
23mm
57575656
Heat Cutter
Spreader Tip (Replaceable Type)
Spreader Root Canal Plugger
No. 08071
*Easy to cut the fiber post length for your need. *There is no fluff of a cutting plane. *Particulates are not generated.
*Cut fiber can be entered in to the holder.
*Easy to cut the fiber thanks to the gauge on the holder.
(Measurement from 5mm to 15mm)
*Size / 130mm*Material / TPX (Holder)
Main body / Holder / Sleeve Guide (3 ea.)
Problems from using Steal Round Bur, Cutting Disc, Diamond Disc1) Fiber become fluffy.2) Melt the surface because of the friction heat between fiber post and bur.3) Remain the color of bur or disc on the section.
Contents
Fiber Cutter Type2 Nipper Steal Round Bur Cutting Disc Cutting Disc with Diamond
5858
Fiber Cutter Type2