mazsola.iit.uni-miskolc.humazsola.iit.uni-miskolc.hu/data/kmi/nt/mcp exam/f.back… · web...

Practice Questions For NT Workstation 4Test no 70-073

The following questions and answers are a guide line for what you have to study for the test, for this tutorial to be effective you must check all the answers to whether they are correct as interpretation of the questions may differ for any individual

Required Score : 705 No. of Questions : 51Time : 90 min ( instant registration )Note : Read MOC Core Technologies and Administrating Windows NT Networks perfectly. You will have to do Unattended installation from Sybex publication book. This colection includes questions which have been received on exams

1.A scenario for an unattended install. Required: the automated install. Of x computers and x laptops.

Optional: All computers must be members of domain CORP – Installation of applications.

Proposed solution: They start the installation of workstation with some funny file(I can’t

remember the name) which immediately makes the required not being met.

They also throw in only one and not two unattend.txt files plus other useless info. Just read

the proposed carefully as they change this quite often.

Remember required: 2 unattend.txt, UDF and SYSdiff (not windiff etc.)

2.RAS multilink connection with 2 ISDN lines with different tel. no’s. How do you configure?

My answer: One phone book entry with four different tel. no’s.

3.Easy question about name resolution (NetBIOS over TCP/IP) = WINS server 4.What to automatically assign IP addresses? = DHCP 5.You have an ISP with a PPP server with script as the answer (can’t remember the exact question but it in some of the other dumps). They appended the file name with .scp. 6.If a file is

moved within a partition to a folder – what happens to the compression attributes? 7.A question about doing an unattended install over the network to x computers. Installing wkst. and applications on identical PC’s with min. admin effort.

My answer: Install wkst. on PC and copy all files used for installation to server, do I

installation of other PC’s over network. Add a UDF file to name the PC’s.

8.Know your NTFS, file and share permissions locally and remotely.

Local = cumulative and least restrictive (except when No Access then No Access)

Remote = most restrictive

9.What 3 file do you need for an unattended install.

Unattend.txt (answer file); UDF; Sysdiff

10.You want to upgrade your WinNT workstation 3.51 to NT 4.0. The computer is currently configured with a single HPFS partition on its hard disk. What must you do?

A: Convert the file system to NTFS and then perform the upgrade.

They also had one where X wants to upgrade her 386 DX33 to NT 4.0. They add a lot of

useless info – You cant’ do this upgrade. The min. requirement is 486.

11.You are the administrator of a WinNT domain and you want to create a system policy to define the desktop options for all WinNT users in your domain.

A: Using System Policy Editor, create a system policy for all the users. Save the policy in a

file called NTConfig.pol in the Netlogon share of the PDC.

12.Creating new printer – you must share with Win’95, WinNT 3.51 and WinNT 4.0 with the least admin.

A: Install all three drivers on your computer.

13.TCP/IP configuration. What do you require?

IP address, Default gateway, Subnet mask.

14.You wish to add an applications path to a users environment? Add it to his environment variables. How?

A: Add it to the Autoexec.bat file OR

Use the environment tab of the System Properties dialog box in the Control Panel.

15.You want to configure your PC as a FTP server. Protocol service? (TCP/IP already installed)

A: Microsoft Peer Web Services

16.Three users on different shifts working on same PC. Confidential info for each. Maintain security and customize desktops.

create a home directory on NTFS partitions for each user.

Directory permissions for exclusive access for each user.

Create a user account for each user.

17.Printing lengthy documents during non-business hours.

A: Create two printers for each print device. Configure printer 1 available hours for non-

business hours. Instruct all users to send all lengthy documents to printer 1.

18.Trap messages? SNMP 19.Success and failure print auditing. What should you enable?

File and object access.

20.You want to install workstation as a member of a domain named ADMIN. You want to create a PC account in the ADMIN domain for this PC. How?

A: Specify that the computer is a member of the ADMIN domain. Supply the USERNAME

and PASSWORD of the ADMINISTRATOR of the ADMIN domain.

21.Scenario with workstation with four identical 2GB SCSI hard disks. The PC has multiple protocols installed and configured. Single FAT partition on each hard disk. Paging file in boot partition etc.

Required: Optimum speed of access to local files.

Optional: Faster speed of access to paging file + Optimize computers’ network performance.

Proposed solution: (on my exam) Configure all hard disks as a volume set. Keep them FAT

partitions. Keep the paging file on the boot partition. Put the most used protocol at the top

of the binding list.

A: This does not meet the required as volume sets are very slow. Striping is much faster.

Keeping the paging file on the boot partition slows access. Also using FAT for anything

bigger than 400MB is not optimum. Here NTFS is better.

22.Some question about users not receiving system policies. The only answer available being replication of domain controllers. 23.Another had this though where three users didn’t receive the group policy, the answer being that their individual policies took precedence (conflicting individual policies).

Policies take precedence over profiles.

Individual policies take precedence over group policies.

Machine policies take precedence over all.

24.What happens to long file names and permissions when files are copied from an NTFS partition to a FAT partition.

A: Permissions are lost but long filenames are retained.

25.To configure a computer to use MS-DOS instead of WinNT 4.0. (Single partition using FAT).

A: Run Sys.com, install DOS and delete WinNT directory and files.

26.X has an account on a NetWare 3.x Server with bindery emulation. To change the password from her workstation PC?

A: Setpass utility

For NDS environment use CTRL-ALT-DEL

27.Which protocol must be installed to use Performance Monitor to gather statistics from your network.

A: Network Monitor Agent.

28.Tricky question about NetWare Servers and NT workstation computers. Remember: to access a NetWare server, only NWLink is required. If sharing resources is required install CSNW. If using NT server as gateway, then install GSNW. 29.What files do you need for a boot disk?

A: Ntldr, Ntdetect.com, Boot.ini, Ntbootdd.sys

30.You want to map a network drive to a folder called RESEARH on a NT server named Marketing via the Internet. The fully qualified domain name is marketing.data.com (they actually give this info in the exam.)

A: \\marketing.data.com\Research

31.X is a member of the users group. He has a folder on a FAT partition that he wants to share whenever his windows NT PC is running. He wants the Everyone Special Group to have Read permissions.

A: Log on as ADMINISTRATOR. In Windows Explorer, right click the folder. Share the

folder and assign Read permissions to the Everyone Special Group.

32.Three 16-bit applications – one crashes all the time. You want to prevent this from interfering with you other applications.

A: Run the three applications in the default memory space. Run all the other applications in

separate memory spaces.

33.How should you use Sysdiff.exe during the automated installation of Windows WKST and applications on 200 identical PC’s?

A: to automate the installation of applications.

34.X is retiring. Y taking place and needs all the same permissions etc.

A: Rename X’s account with Y’ name. Change the password. Y must log on with renewed

account.

35.You set an account policy that specifies max. password age is 60 days. You later create a new user account and check the password never expires check box. What will happen?

A: The password will never expire.

36.Configuring a workstation. You want to allow access to a NetWare 3.x server called FINANCE. How should CSNW be configured?

A: with a preferred server called FINANCE.

3.x or 4.x with bindery emulation = preferred server

4.x server in a NDS environment = Default tree or default context.

37.Connecting to a Macintosh printer? AppleTalk

HP = DLC

38.New UPS that is listed on HCL. How to install?

A:- Connect to serial port using a serial cable with pin connections that meet the UPS

requirements.Use the UPS dialog box from Control Panel to configure the UPS.

39.DUN connects the remote server, gets disconnected after 3 seconds. What to do?

A: Open the Dial-up Networking Monitor dialog box before you dial.

40.Where to install tape devices in Control panel?

A: Tape Devices

41.Question about NT utilities for statistics:

Performance Monitor

Task Manager

42.Each MS-DOS based application runs in its own NT Virtual DOS Machine 43.Question regarding MIDI device (audio card). Which dialog box?

A: Multimedia

44.How do you stop a print device from printing a blank page after each print job?

A: Disable the Print Form Feed in CSNW.

45. Add printer to server but none can see it – printer is not shared

46. Add 30 user effectively without creating account for each – create template and create a/c

from there

47. 2 departments share printer, ensure correct forms are used – create multiple printers

with different setting to the same print device

48. Set share name for directory what share permission can you set – full/read/change/no

access

49. How does your manager see that print job has finished – change properties of print

job to notify mgr. when finished

50. How do you disconnect all users from server – server manager

51. Deletes group, how do you restore (3 answers) – create group with same name,

assign permissions to group, reassign users to the group

52. From where would you confirm there are no irq conflicts to install CD-ROM –

windows NT diagnostics

53. DB on NTFS partition, how do you monitor any attempts to copy db (2 answers) –

use explorer to select events to audit, also in user mgr. for domains set audit policy for

file/object access

54. Where do you increase login attempts before users are logged out – user mgr. for

domains change account policy for all users

56. Keep someone from logging on using default admin account – rename administrators

account

57. Allows users to submit and manage only their jobs, no one else’s – assign print

permissions to everyone group

58. Research directory on NTFS – engineering has change permissions, add/read for

sales, no access for marketing. Sue is member of all three what permissions does she

have – no access

59. How to restore registry from backup tape – choose restore local registry from

restore information section in backup program

60. You are connected to share directory on NT server which group are you a member off –

network

61. How to get same desktop when logging into different PC’s – creating roaming user profile

62. Which template to create home directory with same name as username -

\\servername\sharename\username

63. File backed up on Fred’s PC but you want to restore it to Jim’s PC, how – in backup

program set the new drive and path and once restored, rename

64. Created a share name on FAT what permissions can you give – full, read, change, no

access

65. Need to take PDC offline for two weeks, what do you do – promote bdc and shutdown pdc

66. Have 1 pdc and 2 bdc’s, Sonia has account on domain, you created script file on

pdc , only sometimes does it work – set up directory replication between pdc and bdc

67. How can you configure a printing pool – associate multiple print devices with one printer

68. 5 NT servers in products domain, want to let admin assistant who has account in

domain to backup files/directories on member servers – create global domain backup

group on products domain, add admin assistant to global group, add global group to

local backup group on each member server

69. Employee leaves, temp needs to be owner of files on NTFS partition on NT server –

take ownership of files, assign take ownership rights to temp and have her claim

ownership

70. Want to monitor login attempts of student interns – use user manager for domains

to set audit policy for all login attempts

71. Sales reps need access to db on bdc on domain sales. Reps are in domain Corp

which is trusted by sales, how would you grant them access – add to global group on

Corp and add global group to local group on sales

72. Diane accidentally deletes file, under what conditions can she restore – must be backup

operator

73. How to restore file with the same permissions – select "restore with same

permissions" from restore screen in backup program

74. 3 visitors need to access resources on the network domain – enable guest account

on domain and assign correct permissions

75. Permissions for test.doc are read for everyone group, permissions for LEAD

directory are full control for everyone group, what permissions has everyone group on

test.doc which is in LEAD directory – read only

76. Important db on server is backed up each Friday, do not want to perform full

backup each day, which method of backup is the quickest to restore from –

differential

77. Connect a print device to server, remove everyone group to have print permission,

want two users to have permissions to manage their own jobs but none else’s – assign

print permissions to printer to each user

78. Backup run each night, where can you check to see it ran ok – backup program log file

79. What permissions can you assign to a sharename – full, read, change, no access

80. You are to domain administrator, assign Sarah permissions to manage users accounts and

add her to account manager group, how can you monitor any additions/modifications she

makes – use user manger to set audit policy

81. Allow user to unlock application files, but not be part of admin group – add him to the

service operators local group

82. Trying to logon domains bdc to install software and gets msg. "unable to log on locally’ – in

user manger assign user to a group that has rights on log on locally

83. How must you grant permissions to a user to connect via RAS server – remote access

admin program

84. Drive c is formatted in FAT, file is constantly being deleted, what can she do to see what is

happening – cannot do this, auditing not enabled on FAT

85. Want to set schedule to backup drive d: each night at 8pm – user AT command in NT

86. Different between account disabled and locked out – user account can be disabled by

system administrator, user account can not be locked out by system administrator

87. How to find out what users are currently using shared directory on server – server manager

88. Using windows for workgroups PC, what should he do to administer domain users accounts

on his PC - install client based network admin tool on his PC

89. Create user account on his NT workstation, but when he tries to log onto domain gets msg.

"system could not log you on make sure username/password/domain correct" – user

manager

to create an account for him on PDC

90. On NTFS partition there is January directory with read for everyone group, oldnews

directory with change for everyone group, if you move file from January directory to

Oldnews directory what are permissions – change only

91. Creates account for bob, wants bob to have home directory on NT server, from environment

variables box assigns \\servername\users\username on FAT partition, when he clicks ok

gets msg. "the homedirectory \\servername\users\bob could not be created" – user directory

is not shared

92. Perform nightly backups of db but sometimes file are skipped how do you ensure it backs up

all files (2 answers) –

93. Create home directories for Jan/Kim on NT Server. Jan works on NT workstation and has

no pblms logging on. Kim works on windows for workgroups and cannot access her home

directory – map a drive to her home directory

94. You are domain administration, Jan is a user in your domain, she sets permissions on her

home directory so none can access. She is on vacation, how do you access her home

directory to other users – take ownership and grant access to users

95. Install NT Server and you want to manage file/directory permissions from your NT

workstation after installing Client based admin tools – windows explorer

96. Copy file budget.xls to NTFS partition, assign change permissions to sales group, from

explorer drag file to FAT directory on same server – permissions are lost

97. PDC fails and you have 3 bdc’s (2 answers) –

98. Create a directory d:\marketing on NTFS and assign read permissions to everyone group,

share directory and set sharename permissions for accounting group to change, what

permissions do they have – read

99. Eva belongs to sales group who have read permissions to proposal.doc on NTFS partition,

Eva has change permissions - what permissions does she have – change

100. Eric creates file product.doc in NTFS partition, assigns change permissions to Sales group,

read to everyone group, change to Eric, who can take ownership - Eric

101. How are URL's resolved when using Dial-up networking?

a) DNS

b) WINS

c) ?

d) ?

102. The question new device driver added, the system immediately halts - what do you do?

Last Know Good

103. Scenario with 30 laptops and 50 desktop, same apps, The solution involved logging on to

the domain with one system, installing the apps, then booting from MS network boot disk

and copying all files to the server. Then boot other machines from boot disk and copy

down.

a) Didn't meet criteria across two hardware platforms

104. 200 identical machines wanting to unattended install for NT and apps. What three file do

you need?

a) sysdiff

b) unattend.txt

c) setup.inf

d) udf

I know everybody says a,b and d. But being different I went for abc! My reasoning is that

abd options do not provide application installation. You need to run sysdiff /i to create the

inf file to install the apps.

105. You belong two two groups with read and no access permissions, own permissions are full

control. What are your effective rights?

A no access

106. What two things do you need to know when connecting to an IP printer using network

explorer?

a) hostname and subnet mask

b) printer name and IP address

c) hostname and printername

d) IP address and subnet mask

107. Scenario about uninstall, but joining workgroup, so didn't meet criteria

108. very long scenario about some lass in a lab wanting to move some file from her machine to

the server and make them read only to the user group. Gave 4 options for doing it, the one

chose seems to be the obvious choice but

A Create sub directory, move the files, assign read-only permissions to the subdirectory !

109. You use performance monitor and see your processor is running at 92% and you have

excess paging. What would be the best way forward to address the issue?

a) Add another processor

b) Add more RAM

c) Increase the size of the page file

110. Question on NT3.51 using HPFS wanting to upgrade to NTFS.

A) run convert, then install NT 4

111. Question on upgrading Win 95 to NT4

A) different dir, reinstall apps and setup profile again

112. Scenario about chief exec, want to use a machine and let other's use when not around (I

never met CE, willing to share a machine!), what can do to ensure privacy of this file,

solution included rename administrator to CE name remove all other administrators from

admin group install NTFS additional requirement was to use usernames from the domain,

but the question specified installing the CE PC into a workgroup.

My answer was it fitted primary criteria but not secondary

113. Where can you configure a modem for operation with an application?

the best answer I saw was using the modem properties dialogue in control panel, a bit of a

strange wording.

114. RAS and multilink with dial-back enabled, the twist here seemed that two options were

possible

a) Server not capable of multilink dial back

b) Setup 4 lines with each there own entry in the address book (i.e. no multilink)

I chose the server not capable of dial back, cos call back security enabled.

115. Two questions on disk preparation, i.e. using stripes or volume sets. The volume set was

trying to increase performance no way! The stripe set scenario fit all criteria (better

performance and with binding of the most used protocol at top) better network

performance.

116. NetWare question, with CSNW installed what function can be performed?

a) run NetWare login script

b) access NDS vol. and directories

c) run syscon

d) logon to NetWare 3.11 bindery server

e) act as a gateway for other NT W/S

f) access NetWare printers

A) all but the gateway function is possible

117. IDE tape device - where do you install it?

tape device icon

118. which takes priority profiles or policies policies

119. Question on setting up 50 roaming profiles, ensuring the client keep the current profile?

Difficult question, the options were;

a) copy all profiles to the PDC

b) create a default profile and enable repl

c) user user manager for domain to set roaming profiles

d) use a system policy to create a roaming profile for all users

Not sure of the answer - I went for a) - but have zero confidence it is right.

120. NT Workstation - member of workgroup RESEARCH. You want to map a network drive

on your computer to a NT Server in the CORP domain. The Guest account is disabled in

the CORP domain. How would you do it? (2 choices)

a) Log onto NT Workstation computer with username from the CORP domain

b) Log onto NT Workstation computer with the same username you would use to access

the NT Server computer

c) Select CORP from the Domain drop-down list box in the logon info dialog box

d) Select Connect As in map network drive and enter the username of an account in the

CORP domain

121. You have several MSDOS applications - TSR programs which manages COM port input

and output. How to run in NT Workstation? Run TSR -

a) Before NT loads

b) In virtual DOS machine that is standby DOS

c) in separate virtual DOS

d) in autoexec.nt

122. Administrator of 100 NT Workstations which is a member of the SALES domain. SALES

domain has 1 PDC and 1 BDC.Created system policies for all user account and placed

on PDC. Sometimes user logs on, system policies are applied and sometimes not. How

to make sure it always apply?

a) Config directory replication with the domain

b) Place System policy for each user in their home directories

c) Modify each user's profile to ensure system policy runs

d) Copy system policy to all of NT Workstation computers

123. Want to install NT Workstation unattended. User runs winnt.exe /u command. What (1)

file does it also need?

a) UDF

b) unattend.txt

c) setup.inf

d) setup.sif

124. Who assign IP address at dial up networking ? ISP

125. You want to connect to a MAC printer which protocol you need ? AppleTalk

126. Which protocol do you need when using HP printer not using TCP/IP ? DLC

127. You are installing MIDI device which control panel applet do you use? multimedia applet

128. Which protocol do you use to send trap message ? SNMP

129. Three files for unattended installation ? Unattend.txt UDF and sysdiff

130. Search certain value in the registry ? regedit

131. Which service translate URL to IP ? DNS

132. Disable the shutdown button in the login dialog box use ? registry

133. Computer using HPFS you want to upgrade to NT 4.0 using NTFS how can you do that ?

Convert to NTFS select upgrade

135. Installed an incorrect driver system won’t boot up what can you do? Select Last known

good

136. Required to have IP address automatic assign ? DHCP

137. You have notice a excessive paging how can you solve this problem ? Add more Ram

138. What do you need to print in a TCP/IP printer ? IP address and printer name

139. Dial up connection disconnect after 3 second what can you use ? Use dial up connection

monitor

140. Printing to a NetWare printer how to disable a blank page at the end of the print job ?

Select Last Good Known

141. Implementing a security on your workstation after 15 minutes ? Screen Saver

142. Dual boot want to remove the NT only boot to DOS in FAT ? In NTFS ?

In Fat sys.com and remove NT files In NTFS fdisk

143. Can you dial into a RAS server using 3 modem by using callback ? No you cannot

144. Scenario You have 20 laptops and 5 workstations you want to unattended install ?

Don’t meet require

145. Configure RAS with 2 ISDN lines each have 2B channel ?

Create one phone book with four numbers

146. Smallest activity can be schedule by the processor ? Thread

147. Install a FTP server what must you install ? PWS

148. You change a setting on the display type click on test screen it goes blank what is I

incorrect ? Select [VGA mode]

149. System policy is set for 50 user of XX group but 3 user do not notice any change ?

They have individual system policy

150. Asked to create a dump of application not on memory how can you do that ? DR Watson

151. Change workstation from Domain 1 to Domain 2 ?

Change the control panel -> identification

152. Two things need to configure the UPS what can you do ?

Connect UPS to the serial port and Select UPS applet in Control panel

153. Upgrade 95 to NT is impossible.

154. NTOSKRNL is missing or corrupt when using a floppy boot up what can you do ?

Edit ARC path at boot.ini

155. User want to use event viewer’s security log how can you achieve ?

Add him to administrators account

156. User wants to print large print job after hours ?

Create two printer give one to print after business hour

157. A user retire another user take over his/her account what do you need to do ?

Rename his her account

158. Which two ways to monitor process or memory utilization ?

Performance monitor and Task Manager

159. Install NT on 3 computer without network card but you will install later what can you

choose?

ms loop back

160. You forgot the administrator password what can you do and what happen to user

account?

Restore the last update of Emergency Repair disk

161. How do you map a network drive to a folder via the Internet ?

\\XXX.com\XXX

162. A user who is a member of the user group wish to share a file on his workstation how can

he do this ?

Log on as an administrator

163. How can you join a domain during installation ?

You must have the administrator name and password of the domain

164. How can you change the password on NetWare server ?

setpass and CTRL ALT DEL

165. Which takes priority system policy or user profile ? system policy

166. Startup fail you suspect a problem in the boot sector what should you do ?

Use the setup disk and select repair

167. Which application create user account ? user manager for domain

168. What is the use of sysdiff.exe file ? automate install application

169. NT3.51 Win95 PC need to connect to WK4.0 printer server for printing what can you do ?

Install win95 NT 3.51 and NT wk4 in you machine

170. Three things for TCP/IP in a routed network ?

IP address and subnet mask and default gateway

171. Connect to a printer without install printer driver ? Drag and drop

172. Start NTBACKUP in minimize and in low priority ? start /min /low ntbackup

173. The default memory mode of 16 bits application ? share

174. NetWare 3.x server use bindery emulation ? prefer server

175. NetWare 4.x server use NDS ? tree and context

176. NTW / DOS dual boot doesn’t start DOS "No system disk msg." what file is corrupt ?

Bootsec.dos

177. You enable auditing for printing, you see nothing in the log how do you correct this ?

File and object access

178. Where is the default 16 bits application run ? NTVDM

179. You want to automate connecting to the ISP by using PPP ?

Run script after dial

180. How to add an application path to a user environment, what do you do ?

add a path to the environment’s variable

181. Three 16 bit applications use shared memory blocks to communicate with each other.

When one of it application fail it stop the other 16 bit applications, How can you prevent

it?

Run three in the default and the other run in their own ntvdm

182. You are the administrator of a Windows NT Workstation computer that is used by three

people.The users work different shifts in a facility that handles confidential information.

The users want to maintain the security of their own files. They also want to customize

their won Windows NT Workstation desktop environment, including screen colors and

program groups. Which three steps must you take?

Ans.: Create a user account for each user.Create a home directory for each user on a

NTFS partition. Ensure the directory permission are configured so that users have

exclusive access to their own home directory.

183. Which control panel applet is used to configure modems?

A Modem applet

B Devices applet

C Services applet

D Adapter in network applet

E Dial-up applet

Answer: A

184. You are installing NT and testing the monitor type and the screen goes black. When you

reboot you are put back into the monitor type selection screen. What is the problem?

A Refresh rate

B Resolution

C Monitor type

D Color depth

Answer: C

185. John is installing Windows NT Workstation on his computer. When he tests the display

properties the monitor screen becomes completely dark.When he restarts the computer

the Windows NT installation program returns to the Display Properties box.What is the

cause of the problem? (Choose ONE)

A The display type.

B The desktop area settings.

C The color palette settings.

D The refresh frequency.

Answer: A

186. What two things do you need to print to a TCP/IP printer on a network?

A Hostname + IP-address

B Hostname + subnet mask

C IP-address + printer name

D Printer name + hostname

Answer: C

187. What do you need to print to a TCP/IP printer?

A IP-address

B Printer name

C DLC

D Default gateway

Answer: A, B

188. What is needed to print to a HP printer on the network?

A DLC protocol

189. Given the scenario whereby NT 3.5.1 workstation and Windows95 computers need to

connect to NT workstation 4.0 print server for printing.

Answer: Choose all 3 different printer drivers need to be installed on workstation 4.0.

190. What protocol/service do you need to send TCP/IP trap messages to another computer?

A SNMP

B Simple TCP/IP services

C Nwlink

D Network monitor agent

E DHCP

Answer: A

191. Do you need Network Monitor Agent to monitor Ethernet packet statistics?

A Yes

192. What is required to use performance monitor to monitor your network segment?

A Enable the Network Monitor Agent

193. You want to install NT Workstation from CD-ROM. MS-DOS can access the CD-ROM but

not by NT Workstation. How would you install NT Workstation?

A Start from MS-DOS and run WINNT.EXE from the CD-ROM.

194. You are installing NT from a CD. After first reboot while trying to install a driver you get

the following error message: "Copy Single File: Non-critical error could not copy file". What

is the problem?

A Your hard drive failed

B The file already exists on the hard drive

C The CD-ROM is not compatible with NT / is not on the HCL list

D The hard drive has conflicting interrupts with another device

Answer: B

195. You have a computer with a NIC at the office and a modem when you take it home. How

would you configure it?

A 2 different hardware profiles

196. What do you do if a document is jammed in a printer and was too damaged to reprint?

A Restart from the document menu

197. Windows NT will boot on your computer with a boot disk, but not on Bill’s computer. What

is the problem?

A Change the ARC naming in the boot.ini file to the proper partition

198. Robert installs Client Service for NetWare on his Windows NT workstation. Which

networking tasks can he perform from the computer? (Choose all that apply)

A Allow NetWare client computers to use shared directories and printers on your NT WS

computer.

B Connect to volumes or directories on a NetWare Server.

C Connect to print queues on a NetWare Server.

D Connect to NetWare 4.1 volumes on servers that do not run bindery emulation

E Run the NetWare 3.12 syscon utility from your Windows NT WS computer.

F Run NetWare login scripts during the logon process.

G Function as a Gateway to the NetWare server for other Windows NT WS computers

that do not have CSNW installed.

Answer: B, C, E, F

199. Mixed NT and NW environment, which of the following protocols must be installed on the

NT workstation in order to access resources on the NW server and the NT server?

A CSNW

B GSNW

C FPSNW

D NWLINK

E TCP/IP

F DSNW

G NetBEUI

Note: Watch out for the word protocol. CSNW and GSNW aren’t protocols!

Answer: D

200. You install Dial-Up Networking with all default options. You create a phonebook entry to

dial your Internet service provider. What is the source of an IP address for your modem?

(Choose one)

A Your computer will use the IP address currently assigned to it.

B Your computer will allocate an IP address from the local DHCP server

C Your computer will request an IP address from your Internet service providers PPP-

server.

Answer: C

201. How should you use an unattended.txt file (answer file) during the automated installation

of a Windows NT Workstation on 100 identical new computers? (Choose one)

A To provide hardware-specific configuration information and other configuration data for

the computers.

B To provide user account information, a unique computer name, and a unique identifier

specific to each computer.

C To automate installation of applications on the computers during the installation of

WinNT WS.

D To place application specific registry data into the registry on each computer including

serialization and registration data.

Answer: A

202. You install a tape backup device that uses the Enhanced IDE interface. In which dialog box

from the control panel must you install the tape backup device driver? (Choose one)

A SCSI adapters

B Devices

C System Properties

D Tape Devices

Answer: D

203. Peter Smith wants to install Windows NT Workstation without user invention. He plans to

do this by running winnt.exe with the /u switch. Which additional file must he use?

(Choose one)

A Uniqueness database file (UDF).

B An unattended.txt file (answer file).

C A customized setup.sif file.

D A customized setup.inf file.

Answer: B

204. You suspect that someone is gaining unauthorized access to the computers on your

network. You enable auditing of user login events. When you look at the Event viewer

security log three days later, you see that every account has more than 100 failed logon

attempts before each successful logon.You also note that all the logon attempts on each

account occurred within one minute.You want to prevent further unauthorized logons.

What must you do in the Account Policy dialog box? (Choose one)

A Select the Account lockout radio button.

B Set a value in the spin control in the Maximum Password Age group.

C Set a value in the spin control in the Minimum Password Age group.

D Set the spin box control in the Password Uniqueness group to remember the 10 last

passwords.

Answer: A

205. You want to send a document from your Windows NT workstation computer to a printer

that is located on another Windows NT WS computer. You want to do this without

permanently installing drivers for that printer on your hard disk. What should you do?

(Choose one)

A Use "net print" to send the document to the printer.

B Drag and drop the document file onto the printer in Windows NT explorer.

C Use Windows NT Explorer to temporarily capture the printer, and then send the

document to the printer.

D Use the Add Printer Wizard to temporarily connect to the printer, and then send the


Answer: B or D (check for yourself)

206. You wish a user to be able to view Event Viewer, how can you achieve this?

A Only Administrators can view Event Viewer, so add to

Administrators group.

207. You are installing a MIDI device, which control panel applet do you use?

A Control Panel, Multimedia, Devices, Add

208. How do you lock your workstation if you leave it for more than 30 minutes?

A Use password protected screensaver.

209. How can you implement security on your workstation after 15 minutes of inactivity?

A Enable password protected screensaver.

210. What two groups do you need to belong to in order to share folders on your computer?

A Administrator and Power Users

211. User wants to print large print jobs after hours, how can this be done?

A Create two printers and give one the option to print after hours.

212. What protocol do you need to connect to a MAC printer?

A AppleTalk

213. What is the smallest activity that can be scheduled by the processor / microkernel?

A Thread

214. What is the smallest unit handled by the scheduler service?

A Process

215. A user who is a member of the users group wishes to share a file on his workstation, how

can he do this?

A Log on as administrator and share the directory using Explorer.

216. How can a workstation join a domain during installation?

A You must have an administrator name and password.

217. The NT Workstation Administrator password was lost. What will happen after restoring

with an Emergency Repair Disk (ERD)?

A Accounts and security will be restored to as they were the last time the ERD was

updated.

218. After restarting Windows NT Workstation, monitors shows a blank blue screen without

text and the computer stops responding. You discover that an incorrect driver was just

installed. What should you do to correct the problem?

A Call the manufacturer to request an NT compatible driver

B Use the Last Known Good Configuration to restart your system and correct the

problem.

C Use the emergency repair disk

Answer: B

219. How do you change a password on a NetWare Server?

A Use setpass for 3.51 and CTRL-ALT-DELETE for 4.x (NDS)

220. What is required to have TCP/IP addressing assigned automatically?

A Use DHCP

221. Which takes precedence, system policy or roaming user profile?

A System policy

222. Which application creates user accounts?

A User manager

223. The default memory for 16 bit windows applications is what?

A Shared

224. You notice excessive paging, how do you correct this?

A Add more RAM

B Add a second processor

C Increase the size of the paging file

D Decrease the size of the paging file

E Create a second paging file

Answer: A

225. Startup fails; you suspect a problem in the boot sector what should you do?

A Use 3 startup disks and select repair

226. You have an NT Workstation with TCP/IP installed and you want it to become an FTP

server. What protocol or service do you need?

A PWS

B simple TCP/IP

Answer: A

227. Which service translates URL to IP?

A DNS

228. What does WINS do?

A Provides computers with Internet numbers for specified NetBios names on a LAN

229. You want to set the boot delay time to 10 seconds. How should you proceed?

Choose all that apply

A Edit Boot.ini to set timeout to 10 seconds

B Use Control Panel | System Properties | Startup – Shutdown tab

C Use system properties

D Edit HKEY_CONFIG in the registry

Answer: A, B

230. You want to replace Windows 95 by Windows NT Workstation 4.0 on some user

computers. They all want to keep their Windows 95 desktop settings and all their

applications. How should you proceed?

A Run Winnt.exe and Install Windows NT in the same directory as Windows 95

B Run Winnt32.exe and install Windows NT in the same directory as Windows 95

C Run Winnt.exe and install Windows NT in a separate directory, reinstall all the

applications and reconfigure user environment under Windows NT, then remove

Windows 95

D Can’t be done because Windows 95 and Windows NT have different registry

configurations.

Answer: C

231. How do you run an MS-DOS, Terminate and Stay Resident (TSR) application?

A Start it in its own NTVDM

B Start it in the default NTVDM

C Start it using Config.nt

D Start it using Autoexec.nt

Note: MS-DOS applications run by default in their own NTVDM

Win 16 applications run by default in ONE NTVDM (so they can share memory)

Answer A suggests you should check the "run in separate memory" checkbox.

But an MS-DOS application runs by default in separate memory.

Answer: B

232. You want to run Win16 applications under NT Workstation. Where would these run by

default?

A In a single NT Virtual DOS Machine (NTVDM).

233. You are running 16-bit Windows applications. The 3 applications share information.

However one of these applications is faulty. How do you run the applications without

effecting the other 16-bit Windows applications?

A Run the 3 applications in the default configuration (which is shared memory) and the

remainder in their own NTVDM’s

234. How do you start the command "ntbackup /r /e" with low priority?

A Start /low ntbackup /r /e

B Cmd /low ntbackup /r /e

C run /low ntbackup /r /e

Answer: A

235. What would you enable to record a memory dump following an application failure?

You are supposed to place a target with crosshairs on the correct area

A Create crash dump file On Dr. Watson window

236. Which utility do you use to record memory dump following an application failure?

A Dr. Watson

B Windows NT System properties setting

Answer: A, B

Note: Remember application crash dumps are done in Dr. Watson, system stop errors and

memory dumps are done in FAULTLOG on the startup/shutdown menu.

237. You have a computer that dual boots from NT Workstation or MS-DOS using FAT in all

partitions. You decide to remove NT Workstation and use MS-DOS only. What to do?

A Boot from DOS, run SYS.COM, delete all NT Workstation files from the boot hard

238. Your computer runs only Windows NT Workstation on an NTFS partition. You would like

to remove Windows NT and run MS-DOS. How would you do it?

A Run Sys.com

B Use convert.exe to convert the partitions to FAT, then run Sys.com

C Use Rollback.exe to restore MS-DOS

D use fdisk.exe to remove all the partitions, then use the MS-DOS setup disks to

reinstall MS-DOS

Answer: D

239. Your computer is running Windows NT 3.51 Workstation on an HPFS partition. You would

like to upgrade to Windows NT 4.0 Workstation. How should you proceed?

A Run winnt.exe and install Windows NT 4.0 in the same directory

B Run winnt32.exe and install Windows NT 4.0 in the same directory

C Convert to NTFS, then upgrade to Windows NT 4.0

Answer: C

240. Your computer is setup to dual boot MS-DOS and Windows NT 4.0 Workstation. When

you select to boot MS-DOS from the boot menu, DOS doesn’t start and you get an error

message "No system disk error". What do you suspect is the problem?

A The BOOT.INI file is corrupted

B The NTLDR file is corrupted or missing

C The BOOTSECT.DOS file is corrupted or missing

Answer: C

241. You are printing to a NetWare printer, how do you disable the blank page at the end on

each print job?

A From within CSNW, deselect add form feed

B From GSNW, deselect add form feed

C From Print Manager, disable form feed

Answer: A

242. Which three files are required are required to run unattended installations?

A Unattend.txt

B UDF files

C Sysdiff.exe

D Winnt.exe

E Windiff.exe

Answer: A, B, C

243. You are planing to install NT Workstation with 5 applications on 200 Intel PCs. All PCs

already have the same hardware and the same applications installed. You will install over

the network with an NT Server as the source of installation. Which 3 files

A UNATTEND.TXT (answer file)

B SETUP.INF

C SYSDIFF.EXE

D UDF

Answer: A, B, C.

Note: You don't need UDF because you have same hardware and software

244. Which tools do you use to search for a value in the registry?

A REGEDIT.EXE

B REGEDT32.EXE

C Registry Editor

Answer: A

245. What do you need to have installed in your NT Workstation in order to change the

password for a NetWare user?

A CSNW

B GSNW

C Nwlink

D IPX/SPX

E FPSNW

Answer? (A or C or D)

246. You have an NT Workstation connected to 2 routers, you want the NT Workstation to be

able to route, which of the following do you have to install:

A IP

B Subnet mask

C Gateway

D DHCP

Answer: A, B, C

247. You have an NT Workstation connected via Internet to an NT Server that has a DNS

name of "sales.datum.com" and a printer with the name "reports". How do you refer to

the resource in order to map it?

A \\sales.datum.com\reports

248. How do you map to a share called public on a sales server, that has DNS

SALES.CORP.COM?

A \\sales.corp.com\public

249. You have 2 ISDN adapters with 2 B-channels each on your NT Workstation. Each

channel has its own phone number. You are connected via RAS to an NT Server with the

same configuration. How do you configure RAS connecting with 2 ISDN lines each

having 2 B channels?

A Create one phone book entry with 4 numbers

250. You want an NT Workstation to dial-up to a PPP Server, and after login into the PPP

Server you need to activate a Menu automatically for that user account.

A Create a script to run after dialing

251. You want to run some accounting applications at a higher priority without interfering with

the operating system or any of its services. Which process priority class should you use

for the accounting applications?

A High.

252. Though you are installing Windows NT Workstation without a Network Interface Card

(which will arrive later), you still want to have network protocols installed and configured in

advance.

A Select loop-back adapter and bind protocols to it.

253. You need an NT Workstation user to examine the Event Viewer Security Log. How should

you configure his/her account?

A Make him/her a member of the Admin Local Group on that NT Workstation.

254. NT Workstation won't start and you suspect that some system files or the boot sector can

be damaged. What should you do?

A Insert NT Workstation Setup Boot Disk, restart and repair the installation.

255. A week ago success and failure print auditing was configured for the Everyone special

group on a NT Workstation printer. Since then, about 300 documents have been printed,

but no events were logged. What success/failure audit should you enable?

A In user manager enable auditing of File and Object Access

256. You have Multi-Link enabled for 3 modems on NT Workstation. An NT Server is

configured for callback security. How does NT Workstation Dial-Up Networking affects

access to the NT Server?

A Can not use Multi-Link protocol with this NT Server.

257. Which 2 NT Workstation utilities are available for monitoring processor utilization?

A Performance Monitor

B Task Manager.

Answer: A, B

258. Which two utilities can you use to monitor memory utilization?

A Task Manager and Performance monitor

259. Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for

optimum speed of access to its local (mainly graphic data) files, varying in size from 1MB

to 10MB, for other computers in the same LAN. You have there a SCSI controller with 4

disks of 2 GB each,formatted with FAT.

Required result: To optimize performance for optimum speed of access to local data files.

Optional results: Reconfigure for optimum speed of access to paging file.

Optimize network access performance.

Proposed solution:Configure the first hard disk as boot partition. Configure the other 3

disks as a Volume Set. Use FAT on all partitions. Place data on the Volume

Set. Place paging file on the boot partition. Configure binding order of

protocols; move most used protocols to the bottom of binding order.

The solution produces:

A The required result and 2 of the optional results.

B The required result and 1 of the optional results.

C The required result and none of the optional results.

D None of the required results.

Note: Volume sets DO NOT speed up disk access.

Answer: D

260. You have to administer 90 NT Workstations. Accounts are maintained by a PDC that is

the only server on the network. Users log on using accounts from the domain. You want

to implement restrictions on the NT Workstations so that the "Shut Down" option is

disabled in the login dialog box.

A Use a system policy

B Change the registry value of ShutDownWithoutLogon from 1 to 0.

Answer: A

261. You are the administrator of the CORP Domain. You create a System Policy for the

Domain Users Global Group, however Policy is not taking effect for 3 users. What is

happening?

A They have individual system policies which override group policies.

Note: Individual system policy

Group system policy

Default user profile

Mandatory user profile

262. The Administrator is going to leave the company (for good) and one NT Workstation has

implemented confidential information access as a per file and per user basis. You want a

new user Barbara to take over the administration duties.

A Rename Administrator

263. Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want to upgrade

it to NT Workstation 4.0 with the same settings as in the 3.51 version. What to do?

A You cannot upgrade it; you need at least an Intel 486 to do it.

264. You have an NT 3.51 member server of DOMAIN1, now you also want the same

computer to dual boot also as an NT Workstation 4.0 sometimes. What to do?

A Install NT Workstation 4.0 in its own separate directory (not in the same of NT Server

265. You need to install UPS that is listed in the HCL for your Windows NT Workstation. What

are the 2 steps to install it?

A Connect UPS to any serial port with a pin that meets the UPS connection requirements.

B Use the UPS dialog box from the Control Panel

Answer: A, B.

266. You require a Windows NT Workstation to become a member of the CORP domain. What

should you do?

A Control Panel, Network, Identification

267. You want to move an NT Workstation from DOMAIN1 to DOMAIN2 not changing any

other settings. What to do?


268. Your computer is member of a workgroup. You want to map a network drive to a share on

a server PDC in the XYZ domain. The server has had the guest account disabled.

Choose two options.

A Log on to your workstation using your domain user account

B Log on to your workstation using the account of a domain member

C In the log on box choose the domain name

D In the map network drive box in explorer choose "log on using account" option

E In the map network drive box in explorer choose "connect as" option

Answer: A, E

269. Why would you use SYSDIFF.EXE on an NT Workstation to setup other 300 identical

computers with the same applications?

A to automate installation of applications during the installation of the 300 NT

workstations. (Instead of configuration of hardware)

270. It is necessary to install NT Workstation with a set of applications over 100 identical new

computers and you want to automatically install all applications. What to do?

A Install first NT Workstation, run sysdiff /snap, install applications, run

271. What to do in order to add a path to an environment variable for a user application?

A Go to the System applet in the Control Panel, pick Environment tab, User Environment

and add the variable and path value as the user logged in.

272. Every time that you use Dial-Up Networking to connect to a Remote Server, the computer

disconnects after 3 seconds. What to do in order to trace the problem?

A User Dial-Up Networking Monitor dialog before you dial.

B Record a log file check box in Advanced connection settings dialog box

Answer: A

273. Situation (Long): You have to install 30 desktops and 50 laptops.

Required result: To automate the installation of NT Workstation on all computers.

Optional results: You want all computers to join the CORP domain.

Automate the installation of applications on all computers.

Proposed solution: Create 1 SETUP.INF for all computers. Create 1 UDF with unique

hardware configuration for each type of computer. Install NT

Workstation on 1 type of computer, run sysdiff /snap, install suite of

applications, run sysdiff /diff, use unatttend.txt.






Note: They use UDF to specify hardware differences. UDF can only be used to change

statements from Unattend.txt. Because there are 2 different types of computers

(desktops, laptops) you need to create 2 Unattend.txt files

Answer: D

274. BruceO has an account on a NetWare Server 3.12-named Accounting and an account

BruceO on his NT workstation 4.0. How do you configure CSNW on his workstation?

A Preferred server Accounting

B Preferred server BruceO.Accounting

C Tree Accounting

D Tree NetWare

Answer: (this one you should check for yourself)

275. You want to use Dial-Up-Networking to connect to workstation to a PPP server. Your

Internet Service Provider requires you to log on to a server and select a menu option that

activates PPP on the server.How do you do this?

A Create a script file

B Configure Dial-Up-Networking to open a terminal window after dialing

C Configure Dial-Up-Networking to open a terminal window before dialing

D NT 4.0 does not support this kind of Internet Service Provider.

Answer: B

276. Workstation and 5 applications need to be installed on 200 Intel computers. All will have

identical hardware and applications installed.NT server will be the source of all installation

files. Which files do you need? Choose 3

A Poledit

B Unattended.txt

C Sysdiff

D Setup.inf

E UDF

F Windiff

277. You want to disable the Shutdown command from the Login Box. How to do this with a

minimum of administrative effort!

A Create a system policy and save it in the Netlogon directory

B Use Regedt32.exe

Note: watch for the word minimum. You can accomplish it with both options

Answer: A

278. You are creating and sharing a new printer on your NT workstation 4.0

Users of Windows 95, workstation 3.5.1 and workstation 4.0 will also use this printer. You

need to install printer drivers. What should you do to accomplish this with a minimum of

administrative effort?

A Install appropriate drivers on every computer?

B Install 4.0 drivers on your computer Install 3.5.1 drivers on workstation 3.5.1 computers

Install Windows 95 drivers on Windows 95 computers

C Install workstation 4.0 and 3.5.1 drivers on your computer Install Windows 95 drivers on

Windows 95 computer

D Install 4.0, 3.5.1 and Windows 95 drivers on your computer

Answer: D

279. 30 laptops and 50 desktop computer

Required result: Automate installation NT workstation 4.0

Optional result: Join domain Corp

Automate installation application suite

Proposed solution: Create 1 Setup.inf file. Create 1 UDF file

Install workstation on one computer. Use sysdiff/snapshot. Install

applications and run sysdiff/diff. Automate installation of NT

workstation on all computers by using unattend.txt and the appropriate

portions of UDF. Automate installation of applications by using sysdiff

280. Searching value for registry key

A: Regedit

Tips and Study Guide of NT Workstation 4.0 :-

1.Minimum Hardware requirements of NT 4.0 is 486DX /33 with 12MB Ram and 120MB free Hard disk space.

2.There is no plug and play support in Windows NT. 3.To upgrade from NT 3.51 with HPFS to NT 4.0 you need to convert it to NTFS first. 4.Fat and NTFS both support long file names under NT. Remember to use commas for a long file name on command line

5.The unattended.TXT will allow you to install NT for simple configuration and a UDF identifies the difference b/w installations such as computer name and user name.

6.Sysdiff is a utility to automate application installation during the automated setup of NT. 7.Windiff is a directory comparison tool included in windows NT 3.51 8.There are two registry tools included in NT 1) Regedit 2) Regedit32.

Regedit This is imported from 95 have the ability to search both keys and Branches.

Regedit32 This is a 3.51 editor includes functionality such as registry Permissions.

9.Winnt32.exe does not support /c or /f switches. 10.Four files are require to Load NT. 1) NTLDR 2) Boot.ini 3) Bootsect.dos 4) Ntdetect.Com. 11.Common Errors and their Reasons.

Boot couldn’t find NTLDR. (NTLDR is missing or corrupt.)

NTDETECT checking hardware repeated (NTDETECT.Com is missing or corrupt).

NTOSKRNL missing ( Boot.ini is missing or corrupt )

I/O error accessing boot sector ( Boot sector Problem )

Redundancy service fail to start (Check network setting and protocol. )

12.The repair process use the three setup disks and can verify the system files inspect the start-up environment and inspect the Boot sect.

13.To configure the paging file use performance Tab. 14.If lots of paging occur the most appropriate solution is to ADD RAM. 15.To optimize your Paging file move it away from the System/Boot partition. And if available divide the paging file on the stripe set.

16.A strip site can increase performance but a volume set cannot. And both of them can’t be system or Boot partition.

17.Strip set and volume set can be generated on different types of drives ESDI, IDE, SCSI. 18.Volume set can be extended but only on NTFS partition. Strip set cannot be extended. 19.If screen goes black during a change made in the display properties the most probable cause is a incorrect refresh rate. 20.Windows NT profiles are not compatible with 95 clients. 95 based clients profile must be created on a machine running window 95.

21.Built in groups cannot be deleted or renamed 22.User policy cannot be set for users who log on from LAN Manager, MS-DOS, and Windows for Workgroup or Windows 3.x clients. For those clients you can write a logon script to configure the user network and printers connection.

23.System policy overrides Local, Roaming or Mandatory profiles. 24.Individual Policy overrides group policy. 25.Use system policy to force restriction on particular users. 26.All MS-Dos application runs in different NTVDM and can therefore have priorities but cannot share memory.

27.Windows 16 bit applications, which need to share memory must be run in the default NTVDM.

28.Real-time priority can only be set by administration. 29.To start applications with different priority or in separate NTVDM from start command use parameters first then the application name.

30.Event viewer allow you to check three different types of Events 1) System 2) Security 3) Application.

31.Security event can only be checked by ADMIN. 32.DR Watson saves crash Dumps from Application’s. 33.The startup/Shut Down recovery option Save Memory Crash Dumps. 34.You can use Taskmanager and performance monitor to watch processor and memory usage.

35.DISKPERF.EXE is a utility that allow physical disk counters to be activated for use with performance monitor.

36.Use dial up monitor to trouble shoot RAS problem or activate DEVICE.LOG by editing registry.

37.In a TCP/IP routed network you need to configure IPAddress, Subnet Mask and Default Gateway

38.DHCP: Dynamic Host configuration Protocol. Is a method of automatically assigning IP addresses to computer on a TCP/IP address.

39.WINS : Windows Internet Name Services provides computer with internet no. for specified Netbios Names for a LAN. Win server cannot be configure to use on NON-MICROSOFT computers.

40.DNS: Domain name service Translate friendly URL into IP addresses. 41.WINS server and proxy agent are used to resolve netbios name. 42.PPTP : Point to point tunneling protocol. Is used to provide security over internet links. 43.To prevent unauthorized access through Internet you should disable server services, unbind unnecessary protocol from adapter, disable IP forwarding.

44.To change Password of Novell 3.x server use SETPASS from Novell server. And on 4.x use CTRL+ALT+DEL.

45.When connecting to NetWare 4.x uses "tree Context" and when connecting to 3.x or 4.x in bindery modulus use preferred server.

46.The three options in CSNW are

ADD FORM FEED : Ejects a Blank page after each print job.

PRINT BANNER : Print a page with user information at start of job.

NOTIFY WHEN PRINTED : Notify user when the job is printed.

47.A RAS server can dial back only one no. so a multilink is not possible but an ISDN- line with

2B-Channel nodes with same no can be dialed back.

48.IF ISP is using PPP then it will automatically assign you an IP address and if it is using SLIP you have to manually enter an IP address.

49.When combining SHARE and NTFS PERMISSIONS the most RESTICTIVE take effect.

50.The first Parentheses in NTFS permission describe how users can access existing files and second describe NEW Files.

51.To print to a TCP/IP or LPD printer you need IP address of print servers and printer name as defined on the Print server.

52.To access a data stored on a UNIX machine on a TCP/IP network your NT WKS must be able to resolve host names of UNIX machines to IP addresses. This can be done by LMHOSTS file on your WKS or by querying DNS server to provide name resolution for Unix machines.

53.The Domain displayed in the Domain list at logon reflect the domain to which the user belong and all the Trusted Domain. 54.To Backup registry check the Backup local registry Box and run NT backup. 55.A thread is the smallest task which can be scheduled 56.A UPS can only be attached to the Serial Port.

xxxxxxxxxxxxxxxxxxxxxxxLOOK UP THE ANSWERS on your own! Memorization may get you the

paper MCSE, but comprehension will get you the job! Good luck

Which control panel applet is used to configure modems?

A Modem applet

B Devices applet

C Services applet


E Dial-up applet

Answer: A

You are installing NT and testing the monitor type and the screen goes

black. When

you reboot you are put back into the monitor type selection screen. What

is the

problem?

A Refresh rate

B Resolution

C Monitor type

D Color depth

Answer: C

What two things do you need to print to a TCP/IP printer on a network?


B Hostname + subnetmask

C IP-address + printername

D Printername + hostname

Answer: C

What is needed to print to a HP printer on the network?

A DLC protocol

Given the scenario whereby NT 3.5.1 workstation and Windows95 computers

need to

connect to NT workstation 4.0 print server for printing.

Answer: Choose all 3 different printer drivers need to be installed on

your print server

computer (workstation 4.0).

What protocol/service do you need to send TCP/IP trap messages to

another

computer?

A SNMP


C NWlink


E DHCP

Answer: A

What do you need to monitor Ethernet packet statistics?

A Network Monitor Agent

What is required to use performance monitor to monitor your network

segment?


You want to install NT Workstation from CD-ROM. MS-DOS can access the

CD-ROM but

not by NT Workstation. How would you install NT Workstation?


*Incorrect choices include using winnt32.exe

You are installing NT from a CD. After first reboot while trying to

install a driver you

get the following error message: "CopySingelFile: Non-critical error

could not copy

file". What is the problem?





You have a computer with a NIC at the office and a modem when you take

it home.

How would you configure it?


What do you do if a document is jammed in a printer and was too damaged

to reprint?

(Doc are not listed in spooler - if docs weren't damaged, you could stop

and restart

the spooler service).


Windows NT will boot on your computer with a boot disk, but not on

Bill's computer.

What is the problem?


Robert installs Client Service for NetWare on his Windows NT

workstation. Which

networking tasks can he perform from the computer? (Choose all that

apply)

A Allow NetWare client computers to use shared directories and printers

on your NT

WS computer.



D Connect to NetWare 4.1 volumes on servers that do not run bindery

emulation



G Function as a Gateway to the NetWare server for other Windows NT WS

computers


Note: A Can't be done unless FPNW has been installed.

F Just mark the checkbox in CSNW applet, and you can run NetWare login

scripts

*There is some debate over answer D. I didn't get this question on the

test, but I say D

is correct, because NT4 is able to work in either the NDS environment

(NetWare 4.x,

no bindery emulation) OR with NetWare 3.x (which does use bindery

emulation).

Mixed NT and NW environment, which of the following protocols must be

installed on

the NT workstation in order to access resources on the NW server and the

NT server?

A CSNW

B GSNW

C FPNW

D NWLINK

E TCP/IP

F DSNW

G NetBEUI

Note: Watch out for the word protocol. CSNW and GSNW aren't protocols!

Also,

remember that with only NWLink, your NT client can still access

client/server apps on

the NW server, without CSNW being installed. Installing CSNW enables

your NT client

to access file and print shares on the NW server.

Answer: D

You install Dial-Up Networking with all default options. You create a

phonebook entry

to dial your Internet service provider. What is the source of an IP

address for your

modem? (Choose one)



C Your computer will request an IP address from your Internet service

providers PPP-

server.

Answer: C

How should you use an unattended.txt file (answer file) during the

automated

installation of a Windows NT Workstation on 100 identical new computers?

(Choose

one)

A To provide hardware-specific configuration information and other

configuration

data for the computers.

B To provide user account information, a unique computer name, and a

unique

identifier specific to each computer.

C To automate installation of applications on the computers during the

installation of

WinNT WS.

D To place application specific registry data into the registry on each

computer

including serialization and registration data.

Answer: A Remember, answer file is for config and hardware, Sysdiff is

for apps

You install a tape backup device that uses the Enhanced IDE interface.

In which

dialog box from the control panel must you install the tape backup

device driver?

(Choose one)

A SCSI adapters

B Devices

C System Properties

D Tape Devices

Answer: D Tip - Learn the names of the icons in Control Panel! Many

questions are

dead giveaways if you know this, even if you don't know why. Incorrect

choices on

this sort of question are usually items/icons that don't exist!!

Peter Smith wants to install Windows NT Workstation without user

invention. He

plans to do this by running winnt.exe with the /u switch. Which

additional file must he

use? (Choose one)





Answer: B

You suspect that someone is gaining unauthorized access to the computers

on your

network. You enable auditing of user login events. When you look at the

Eventviewer

security log three days later, you see that every account has more than

100 failed

logon attempts before each successful logon. You also note that all the

logon

attempts on each account occurred within one minute.

You want to prevent further unauthorized logons. What must you do in the

Account

Policy dialog box? (Choose one)




D Set the spin box control in the Password Uniqueness group to remember

the 10 last

passwords.

Answer: A

You want to send a document from your Windows NT workstation computer to

a

printer that is located on another Windows NT WS computer. You want to

do this

without permanently installing drivers for that printer on your hard

disk. What should

you do? (Choose one)


B Drag and drop the document file onto the printer in Windows

NTexplorer.

C Use Windows NT Explorer to temporarily capture the printer, and then

send the


D Use the Add Printer Wizard to temporarily connect to the printer, and

then send the


Answer: B

You wish a user to be able to view Event Viewer, how can you achieve

this?

A Only Administrators can view Event Viewer, so add user to


You are installing a MIDI device, which control panel applet do you use?

A Multimedia (Again, know those Control Panel icons!)

How do you lock your workstation if you leave it for more than 30

minutes?


How can you implement security on your workstation after 15 minutes of

inactivity?


User wants to print large print jobs after hours, how can this be done?

Note: This question will either request the option to print after hours,

or require users

to print after hours. Two different answers! Make sure if question

requires the option,

you give users the option, and vice versa.


What protocol do you need to connect to a MAC printer?

A AppleTalk

What is the smallest activity that can be scheduled by the processor /

microkernel?

A Thread

What is the smallest unit handled by the scheduler service?

A Process

A user who is a member of the users group wishes to share a file on his

workstation,

how can he do this?


How can a workstation join a domain during installation?

A You must have the domain administrator name and password. (Not just of

the

workstation admin)

The NT Workstation Administrator password was lost. What will happen

after

restoring with an Emergency Repair Disk (ERD)?

Accounts and security will be restored to as they were the last time the

ERD was

updated.

After restarting Windows NT Workstation, monitors shows a blank blue

screen

without text and the computer stops responding. You discover that an

incorrect

driver was just installed. What should you do to correct the problem?


B Use the Last Known Good Configuration to restart your system and

correct the

problem.


Answer: B Remember: If it's recent changes to the machine that caused

the problem,

you can usually fix it with LKGC.

How do you change a password on a NetWare Server?


What is required to have TCP/IP addressing assigned automatically?

A Use DHCP

Which takes precedence, system policy or roaming user profile?

A System policy

*Policies over Profiles.

User Policy over Group Policy.

Machine/System Policy over all.

Which application creates user accounts?

A User manager

The default memory for 16 bit windows applications is what?

A Shared

* DOS apps run in their own VDM's by default. 16bit apps run in ONE VDM

by default

(shared).

You notice excessive paging, how do you correct this?

A Add more RAM





Answer: A

Startup fails; you suspect a problem in the boot sector what should you

do?


*Key here is that the problem is in the boot sector. Boot sector

corruption can be

repaired by the 'repair' option in install.

You have an NT Workstation with TCP/IP installed and you want it to

become an FTP

server. What protocol or service do you need?

A PWS (Peer Web Services)

B simple TCP/IP services

Answer: A

Which service translates URL to IP?

A DNS

What does WINS do?

A Translates NetBIOS names to IP addresses.

*Remember that WINS is specific to Microsoft, and DNS can be used with

UNIX boxes.

You want to set the boot delay time to 10 seconds. How should you

proceed?



B Use Control Panel | System Properties | Startup - Shutdown tab



Answer: A, B

You want to replace Windows 95 by Windows NT Workstation 4.0 on some

user

computers. They all want to keep their Windows 95 desktop settings and

all their

applications. How should you proceed?

A Run Winnt.exe and Install Windows NT in the same directory as Windows

95

B Run Winnt32.exe and install Windows NT in the same directory as

Windows 95

C Run Winnt.exe and install Windows NT in a separate directory,

reinstall all the

applications and reconfigure user environment under Windows NT, then

remove

Windows 95

D Can't be done because Windows 95 and Windows NT have different

registry

configurations.

Answer: C

*Remember that there really is no way to 'upgrade' from Win95 and save

all user

settings. Win 3.x and earlier versions of NT can be upgraded.

How do you run an MS-DOS, Terminate and Stay Resident (TSR) application?






Win 16 applications run by default in ONE NTVDM (so they can share

memory)

Answer A suggests you should check the "run in separate memory"

checkbox.


Answer: B

You want to run Win16 applications under NT Workstation. Where would

these run by

default?

In a single NT Virtual DOS Machine (NTVDM). ("a" single VDM, not

separate VDM's. All

are in ONE VDM.)

You are running 16-bit Windows applications. The 3 applications share

information.

However one of these applications is faulty. How do you run the

applications without

effecting the other 16-bit Windows applications?

A Run the 3 applications in the default configuration (which is shared

memory) and

the remainder in their own NTVDM's

How do you start the command "ntbackup /r /e" with low priority?




Answer: A

*You may see this question ask for low and minimized... in which case it

would be

start /min /low ntbackup /r /e

What would you enable to record a memory dump following an application

failure?


A Create crash dump file On Dr. Watson window

Which utility do you use to record memory dump following an application

failure?

A Dr. Watson


Answer: A

Note: Remember application crash dumps are done in Dr. Watson, system

stop errors

and memory dumps are done in FAULTLOG on the startup/shutdown menu.

You have a computer that dual boots from NT Workstation or MS-DOS using

FAT in all

partitions. You decide to remove NT Workstation and use MS-DOS only.

What to do?

A Boot from DOS, run SYS.COM, delete all NT Workstation files

Note: For the same question on a machine with only NT, using NTFS, use

FDISK

Your computer runs only Windows NT Workstation on an NTFS partition. You

would

like to remove Windows NT and run MS-DOS. How would you do it?

A Run Sys.com

BUse convert.exe to convert the partitions to FAT, then run Sys.com


D use fdisk.exe to remove all the partitions, then use the MS-DOS setup

disks to

reinstall MS-DOS

Answer: D

Your computer is running Windows NT 3.51 Workstation on an HPFS

partition. You

would like to upgrade to Windows NT 4.0 Workstation. How should you

proceed?




Answer: C

Your computer is setup to dual boot MS-DOS and Windows NT 4.0

Workstation. When

you select to boot MS-DOS from the boot menu, DOS doesn't start and you

get an error

message "No system disk error". What do you suspect is the problem?




Answer: C

You are printing to a NetWare printer, how do you disable the blank page

at the end

on each print job?




Answer: A

*Note that if the blank page contains only your user name, etc, that is

a banner page,

not a form feed!

Which three files are required are required to run unattended

installations?

A Unattend.txt

B UDF files

C Sysdiff.exe

D Winnt.exe

E Windiff.exe

Answer: A, B, C

You are planing to install NT Workstation with 5 applications on 200

Intel PCs. All PCs

already have the same hardware and the same applications installed. You

will install

over the network with an NT Server as the source of installation. Which

3 files


B SETUP.INF

C SYSDIFF.EXE

D UDF

Answer: A, B, C. Check this answer. For some reason, I don't agree, I'd

say stick with

the usual, but I can't find a definite answer either way. I did get one

question wrong in

this section on my test, and it was probably because I stuck with the

usual three

instead of choosing the INF file, but still, look it up!

Which tools do you use to search for a value in the registry?

A REGEDIT.EXE

B REGEDT32.EXE

C Registry Editor

Answer: A

* The main difference between regedit and regedit32 is that 32 can only

search for

keys in the registry, and regedit can search for strings, values, etc

What do you need to have installed in your NT Workstation in order to

change the

password for a NetWare user?

A CSNW

B GSNW

C NWlink

D IPX/SPX

E FPNW

Answer A (check on this one too)

You have an NT Workstation connected to 2 routers, you want the NT

Workstation to

be able to route, which of the following do you have to install:

A IP

B Subnetmask

C Default Gateway

D DHCP

Answer: A, B, C

*Note, if not routed, all you need is IP and subnet mask.

You have an NT Workstation connected via Internet to an NT Server that

has a DNS

name of "sales.datum.com" and a printer with the name "reports". How do

you refer to

the resource in order to map it?


You have 2 ISDN adapters with 2 B-channels each on your NT Workstation.

Each

channel has its own phone number. You are connected via RAS to an NT

Server with

the same configuration. How do you configure RAS connecting with 2 ISDN

lines each

having 2 B channels?


You want an NT Workstation to dial-up to a PPP Server, and after login

into the PPP

Server you need to activate a Menu automatically for that user account.


You want to run some accounting applications at a higher priority

without interfering

with the operating system or any of its services. Which process priority

class should

you use for the accounting applications?

A High.

Though you are installing Windows NT Workstation without a Network

Interface Card

(which will arrive later), you still want to have network protocols

installed and

configured in advance.

A. Select loop-back adapter and bind protocols to it.

You need an NT Workstation user to examine the Event Viewer Security

Log. How

should you configure his/her account?

A Make him/her a member of the Administrator Group on that NT

Workstation.

A week ago success and failure print auditing was configured for the

Everyone

special group on a NT Workstation printer. Since then, about 300

documents have

been printed, but no events were logged. What success/failure audit

should you

enable?


You have Multi-Link enabled for 3 modems on NT Workstation. An NT Server

is

configured for callback security. How does NT Workstation Dial-Up

Networking

affects access to the NT Server?


Callback won't work with multilink!!!

Which 2 NT Workstation utilities are available for monitoring processor

utilization?


B Task Manager.

Answer: A, B

Which two utilities can you use to monitor memory utilization?


Situation (Long): You are planing to reconfigure an NT Workstation with

32 MB RAM

for optimum speed of access to its local (mainly graphic data) files,

varying in size

from 1MB to 10MB, for other computers in the same LAN. You have there a

SCSI

controller with 4 disks of 2 GB each, formatted with FAT.

Required result: To optimize performance for optimum speed of access to

local data

files.

Optional results: Reconfigure for optimum speed of access to paging

file.


Proposed solution: Configure the first hard disk as boot partition.

Configure the other

3 disks as a Volume Set. Use FAT on all partitions. Place data on the

Volume Set.

Place paging file on the boot partition. Configure binding order of

protocols; move

most used protocols to the bottom of binding order. The solution

produces:






Tip - read the required result, then read the proposed solution. If the

required result is

not met, you've saved yourself a lot of reading and time.

Answer: D

You have to administer 90 NT Workstations. Accounts are maintained by a

PDC that is

the only server on the network. Users log on using accounts from the

domain. You

want to implement restrictions on the NT Workstations so that the "Shut

Down"

option is disabled in the login dialog box. Least administrative effort.



Answer: A Both will work, but A if least administrative effort.

You want to disable the Shutdown command from the Login Box. How to do

this with

a minimum of administrative effort!


B Use Regedt32.exe

Note: watch for the word minimum. You can accomplish it with both

options

You are the administrator of the CORP Domain. You create a System Policy

for the

Domain Users Global Group, however Policy is not taking effect for 3

users. What is

happening?


The Administrator is going to leave the company (for good) and one NT

Workstation

has implemented confidential information access as a per file and per

user basis. You

want a new user Barbara to take over the administration duties.

A Rename Administrator account

Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want

to

upgrade it to NT Workstation 4.0 with the same settings as in the 3.51

version. What

to do?


You have an NT 3.51 member server of DOMAIN1, now you also want the same

computer to dual boot also as an NT Workstation 4.0 sometimes. What to

do?

A Install NT Workstation 4.0 in its own separate directory (not in the

same of NT

Server 3.51).

You need to install UPS that is listed in the HCL for your Windows NT

Workstation.

What are the 2 steps to install it?

A. Connect UPS to any serial port with a pin that meets the UPS

connection

requirements.


Answer: A, B.

You require a Windows NT Workstation to become a member of the CORP

domain.

What should you do?


You want to move an NT Workstation from DOMAIN1 to DOMAIN2 not changing

any

other settings. What to do?


* Same as above - this is how you change domains!!!

Your computer is member of a workgroup. You want to map a network drive

to a

share on a server PDC in the XYZ domain. The server has had the guest

account

disabled. Choose two options.




D In the map network drive box in explorer choose "log on using account"

option


Answer: A, E (FYI I didn't look this one up, so you may want to check it

out yourself).

Why would you use SYSDIFF.EXE on an NT Workstation to setup other 300

identical

computers with the same applications?

A to automate installation of applications during the installation of

the 300 NT


It is necessary to install NT Workstation with a set of applications

over 100 identical

new computers and you want to automatically install all applications.

What to do?

A Install first NT Workstation, run sysdiff /snap, install apps, run

sysdiff /diff to create

the difference file. Install to rest and apply diff file.

What to do in order to add a path to an environment variable for a user

application?

A Control Panel, System, Environment, User Environment

Every time that you use Dial-Up Networking to connect to a Remote

Server, the

computer disconnects after 3 seconds. What to do in order to trace the

problem?



Answer: A

Situation (Long): You have to install 30 desktops and 50 laptops.

Required result: To automate the installation of NT Workstation on all

computers.



Proposed solution: Create 1 SETUP.INF for all computers. Create 1 UDF

with unique

hardware configuration for each type of computer. Install NT Workstation

on 1 type of

computer, run sysdiff /snap, install suite of applications, run sysdiff

/diff, use

unatttend.txt.






Note: They use UDF to specify hardware differences. UDF can only be used

to change

statements from Unattend.txt. Because there are 2 different types of

computers

(desktops, laptops) you need to create 2 Unattend.txt files

Answer: D

BruceO has an account on a NetWare Server 3.12-named Accounting and an

account

BruceO on his NT workstation 4.0. How do you configure CSNW on his

workstation?

A. Preferred server Accounting


C Tree Accounting

D Tree NetWare

Answer: A

* NetWare 3.x (bindery emulation) = Preferred Server

NetWare 4.x (NDS) = Default tree and context

You want to use Dial-Up-Networking to connect to workstation to a PPP

server. Your

Internet Service Provider requires you to log on to a server and select

a menu option

that activates PPP on the server. How do you do this?





Know your rights and effective permissions! Remember: Remote (share) =

most

restrictive. No Access Rules Over All. Local (at workstation) = least

restrictive

You are creating and sharing a new printer on your NT workstation 4.0

Users of

Windows 95, workstation 3.5.1 and workstation 4.0 will also use this

printer. You need

to install printer drivers. What should you do to accomplish this with a

minimum of

administrative effort?


B Install 4.0 drivers on your computer

Install 3.5.1 drivers on workstation 3.5.1 computers


C Install workstation 4.0 and 3.5.1 drivers on your computer

Install Windows 95 drivers on Windows 95 computer


Answer: D

How do you automatically assign IP's?

DHCP

Boot error - NTOSKRNL is missing or corrupt. Fix?

Edit ARC path in boot.ini, or use ERD to repair

Boot error - NTLDR is missing. Fix?

If there's a non-system floppy in the drive, eject it and reboot.

If boot.ini is not present, replace it from a backup or use ERD to

repair.

If NTLDR is actually missing or damaged, repair from ERD.

Boot error - NTDETECT keeps repeating. Fix?

Must use ERD to repair.

You administer a workstation used by three people who want their own

desktop

envioronment, and must maintain security of their own files. 3 steps?

Create user - Create home directories for each user on NTFS partition -

Set

permissions

(Incorrect option includes 'create a unique profile for each user'

instead of 'create

unique user accounts')

Long scenario involving a vice president with a new computer. He must

join the CORP

domain. Proposed solution says to join the CORP workgroup. This blows

the

installation - does not meet required. Keep your eyes open for it. One

word usually

makes the difference.

Remember, to monitor packets or use Performance Monitory, you need the

Network

Monitor Agent enabled!

For all unattended install questions, beware of the "Windiff" option. No

such thing! It's

sysdiff.

If a file is moved within the same partition - what happens to

compression attributes?

Same as permissions - move in same partition = retains it's attributes,

move across

partitions = inherits attributes of parent, copy anywhere = inherit.

Files needed to make a boot disk - Ntldr, Ntdetect, boot.ini,

Ntbootdd.sys (for SCSI

with bios disabled)

Account policy specifies max password age is 60 days. You later create a

new user

account and check the 'password never expires' box. What happens?

Password will never expire.

xxxxxxxxxxxxxxxxxxxxxxxxxxxx

Workstation exam questions

Which control panel applet is used to configure modems?

A Modem applet

B Devices applet

C Services applet


E Dial-up applet

Answer: A

You are installing NT and testing the monitor type and the screen goes black. When you reboot you

are put back into the monitor type selection screen. What is the problem?

A Refresh rate

B Resolution

C Monitor type

D Color depth

Answer: C

John is installing Windows NT Workstation on his computer. When he tests the display properties the

monitor screen becomes completely dark.

When he restarts the computer the Windows NT installation program returns to the Display Properties

box.

What is the cause of the problem? (Choose ONE)

A The display type.

B The desktop area settings.

C The color palette settings.

D The refresh frequency.

Answer: A

What two things do you need to print to a TCP/IP printer on a network?


B Hostname + subnetmask

C IP-address + printername

D Printername + hostname

Answer: C

What do you need to print to a TCP/IP printer?

A IP-address

B Printer name

C DLC

D Default gateway

Answer: A, B

What is needed to print to a HP printer on the network?

A DLC protocol

Given the scenario whereby NT 3.5.1 workstation and Windows95 computers need to connect to NT

workstation 4.0 print server for printing.

Answer: Choose all 3 different printer drivers need to be installed on workstation 4.0.

What protocol/service do you need to send TCP/IP trap messages to another computer?

A SNMP


C Nwlink


E DHCP

Answer: A

Do you need Network Monitor Agent to monitor Ethernet packet statistics?

A Yes

What is required to use performance monitor to monitor your network segment?


You want to install NT Workstation from CD-ROM. MS-DOS can access the CD-ROM but not by NT

Workstation. How would you install NT Workstation?


You are installing NT from a CD. After first reboot while trying to install a driver you get the following

error message: "CopySingelFile: Non-critical error could not copy file". What is the problem?





Answer: B

You have a computer with a NIC at the office and a modem when you take it home. How would you

configure it?


What do you do if a document is jammed in a printer and was too damaged to reprint?


Windows NT will boot on your computer with a boot disk, but not on Bill’s computer. What is the

problem?


Robert installs Client Service for NetWare on his Windows NT workstation. Which networking tasks

can he perform from the computer? (Choose all that apply)

A Allow NetWare client computers to use shared directories and printers on your NT WS

computer.



D Connect to NetWare 4.1 volumes on servers that do not run bindery emulation



G Function as a Gateway to the NetWare server for other Windows NT WS computers


Note: A Can’t be done unless FPNW has been installed.

D They have to run in bindery emulation

F Just mark the checkbox in CSNW applet, and you can run NetWare login scripts

Answer: B, C, E, F

Mixed NT and NW environment, which of the following protocols must be installed on the NT

workstation in order to access resources on the NW server and the NT server?

A CSNW

B GSNW

C FPSNW

D NWLINK

E TCP/IP

F DSNW

G NetBEUI

Note: Watch out for the word protocol. CSNW and GSNW aren’t protocols!

Answer: D

You install Dial-Up Networking with all default options. You create a phonebook entry to dial your

Internet service provider.

What is the source of an IP address for your modem? (Choose one)



C Your computer will request an IP address from your Internet service providers PPP-

server.

Answer: C

How should you use an unattended.txt file (answer file) during the automated installation of a Windows

NT Workstation on 100 identical new computers? (Choose one)

A To provide hardware-specific configuration information and other configuration data for

the computers.

B To provide user account information, a unique computer name, and a unique identifier

specific to each computer.

C To automate installation of applications on the computers during the installation of

WinNT WS.

D To place application specific registry data into the registry on each computer including

serialization and registration data.

Answer: A

You install a tape backup device that uses the Enhanced IDE interface. In which dialog box from the

control panel must you install the tape backup device driver? (Choose one)

A SCSI adapters

B Devices

C System Properties

D Tape Devices

Answer: D

Peter Smith wants to install Windows NT Workstation without user invention. He plans to do this by

running winnt.exe with the /u switch.

Which additional file must he use? (Choose one)





Answer: B

You suspect that someone is gaining unauthorized access to the computers on your network. You

enable auditing of user login events. When you look at the Eventviewer security log three days later,

you see that every account has more than 100 failed logon attempts before each successful logon.

You also note that all the logon attempts on each account occurred within one minute.

You want to prevent further unauthorized logons. What must you do in the Account Policy dialog box?

(Choose one)




D Set the spin box control in the Password Uniqueness group to remember the 10 last

passwords.

Answer: A

You want to send a document from your Windows NT workstation computer to a printer that is located

on another Windows NT WS computer. You want to do this without permanently installing drivers for

that printer on your hard disk. What should you do? (Choose one)


B Drag and drop the document file onto the printer in Windows NT explorer.

C Use Windows NT Explorer to temporarily capture the printer, and then send the


D Use the Add Printer Wizard to temporarily connect to the printer, and then send the


Answer: B or D (check for yourself)

You wish a user to be able to view Event Viewer, how can you achieve this?

A Only Administrators can view Event Viewer, so add to


You are installing a MIDI device, which control panel applet do you use?

A Control Panel, Multimedia, Devices, Add

How do you lock your workstation if you leave it for more than 30 minutes?


How can you implement security on your workstation after 15 minutes of inactivity?


What two groups do you need to belong to in order to share folders on your computer?

A Administrator and Power Users

User wants to print large print jobs after hours, how can this be done?


What protocol do you need to connect to a MAC printer?

A AppleTalk

What is the smallest activity that can be scheduled by the processor / microkernel?

A Thread

What is the smallest unit handled by the scheduler service?

A Process

A user who is a member of the users group wishes to share a file on his workstation, how can he do

this?


How can a workstation join a domain during installation?

A You must have an administrator name and password.

The NT Workstation Administrator password was lost. What will happen after restoring with an

Emergency Repair Disk (ERD)?

A Accounts and security will be restored to as they were the last time the ERD was

updated.

After restarting Windows NT Workstation, monitors shows a blank blue screen without text and the

computer stops responding. You discover that an incorrect driver was just installed.

What should you do to correct the problem?


B Use the Last Known Good Configuration to restart your system and correct the

problem.


Answer: B

How do you change a password on a NetWare Server?


What is required to have TCP/IP addressing assigned automatically?

A Use DHCP

Which takes precedence, system policy or roaming user profile?

A System policy

Which application creates user accounts?

A User manager

The default memory for 16 bit windows applications is what?

A Shared

You notice excessive paging, how do you correct this?

A Add more RAM





Answer: A

Startup fails; you suspect a problem in the boot sector what should you do?


You have an NT Workstation with TCP/IP installed and you want it to become an FTP server. What

protocol or service do you need?

A PWS

B simple TCP/IP

Answer: A

Which service translates URL to IP?

A DNS

What does WINS do?

A Provides computers with Internet numbers for specified NetBios names on a LAN

You want to set the boot delay time to 10 seconds. How should you proceed?



B Use Control Panel | System Properties | Startup – Shutdown tab



Answer: A, B

You want to replace Windows 95 by Windows NT Workstation 4.0 on some user computers. They all

want to keep their Windows 95 desktop settings and all their applications. How should you proceed?

A Run Winnt.exe and Install Windows NT in the same directory as Windows 95

B Run Winnt32.exe and install Windows NT in the same directory as Windows 95

C Run Winnt.exe and install Windows NT in a separate directory, reinstall all the

applications and reconfigure user environment under Windows NT, then remove

Windows 95

D Can’t be done because Windows 95 and Windows NT have different registry

configurations.

Answer: C

How do you run an MS-DOS, Terminate and Stay Resident (TSR) application?






Win 16 applications run by default in ONE NTVDM (so they can share memory)

Answer A suggests you should check the "run in separate memory" checkbox.


Answer: B

You want to run Win16 applications under NT Workstation. Where would these run by default?

A In a single NT Virtual DOS Machine (NTVDM).

You are running 16-bit Windows applications. The 3 applications share information. However one of

these applications is faulty. How do you run the applications without effecting the other 16-bit Windows

applications?

A Run the 3 applications in the default configuration (which is shared memory) and the

remainder in their own NTVDM’s

How do you start the command "ntbackup /r /e" with low priority?




Answer: A

What would you enable to record a memory dump following an application failure?


A Create crash dump file

On Dr. Watson window

Which utility do you use to record memory dump following an application failure?

A Dr. Watson


Answer: A, B

Note: Remember application crash dumps are done in Dr. Watson, system stop errors and memory

dumps are done in FAULTLOG on the startup/shutdown menu.

You have a computer that dual boots from NT Workstation or MS-DOS using FAT in all partitions. You

decide to remove NT Workstation and use MS-DOS only. What to do?

A Boot from DOS, run SYS.COM, delete all NT Workstation files from the boot hard

Your computer runs only Windows NT Workstation on an NTFS partition. You would like to remove

Windows NT and run MS-DOS. How would you do it?

A Run Sys.com



D use fdisk.exe to remove all the partitions, then use the MS-DOS setup disks to

reinstall MS-DOS

Answer: D

Your computer is running Windows NT 3.51 Workstation on an HPFS partition. You would like to

upgrade to Windows NT 4.0 Workstation. How should you proceed?




Answer: C

Your computer is setup to dual boot MS-DOS and Windows NT 4.0 Workstation. When you select to

boot MS-DOS from the boot menu, DOS doesn’t start and you get an error message "No system disk

error". What do you suspect is the problem?




Answer: C

You are printing to a NetWare printer, how do you disable the blank page at the end on each print job?




Answer: A

Which three files are required are required to run unattended installations?

A Unattend.txt

B UDF files

C Sysdiff.exe

D Winnt.exe

E Windiff.exe

Answer: A, B, C

You are planing to install NT Workstation with 5 applications on 200 Intel PCs. All PCs already have

the same hardware and the same applications installed.

You will install over the network with an NT Server as the source of installation. Which 3 files


B SETUP.INF

C SYSDIFF.EXE

D UDF

Answer: A, B, C.

Note: You don't need UDF because you have same hardware and software

Which tools do you use to search for a value in the registry?

A REGEDIT.EXE

B REGEDT32.EXE

C Registry Editor

Answer: A

What do you need to have installed in your NT Workstation in order to change the password for a

NetWare user?

A CSNW

B GSNW

C Nwlink

D IPX/SPX

E FPSNW

Answer? (A or C or D)

You have an NT Workstation connected to 2 routers, you want the NT Workstation to be able to route,

which of the following do you have to install:

A IP

B Subnetmask

C Gateway

D DHCP

Answer: A, B, C

You have an NT Workstation connected via Internet to an NT Server that has a DNS name of

"sales.datum.com" and a printer with the name "reports".

How do you refer to the resource in order to map it?


How do you map to a share called public on a sales server, that has DNS SALES.CORP.COM?

A \\sales.corp.com\public

You have 2 ISDN adapters with 2 B-channels each on your NT Workstation. Each channel has its own

phone number. You are connected via RAS to an NT Server with the same configuration.

How do you configure RAS connecting with 2 ISDN lines each having 2 B channels?


You want an NT Workstation to dial-up to a PPP Server, and after login into the PPP Server you need

to activate a Menu automatically for that user account.


You want to run some accounting applications at a higher priority without interfering with the operating

system or any of its services. Which process priority class should you use for the accounting

applications?

A High.

Though you are installing Windows NT Workstation without a Network Interface Card (which will arrive

later), you still want to have network protocols installed and configured in advance.

A Select loop-back adapter and bind protocols to it.

You need an NT Workstation user to examine the Event Viewer Security Log. How should you

configure his/her account?

A Make him/her a member of the Admin Local Group on that NT Workstation.

NT Workstation won't start and you suspect that some system files or the boot sector can be

damaged. What should you do?

A Insert NT Workstation Setup Boot Disk, restart and repair the installation.

A week ago success and failure print auditing was configured for the Everyone special group on a NT

Workstation printer. Since then, about 300 documents have been printed, but no events were logged.

What success/failure audit should you enable?


You have Multi-Link enabled for 3 modems on NT Workstation. An NT Server is configured for

callback security. How does NT Workstation Dial-Up Networking affects access to the NT Server?


Which 2 NT Workstation utilities are available for monitoring processor utilization?


B Task Manager.

Answer: A, B

Which two utilities can you use to monitor memory utilization?


Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum

speed of access to its local (mainly graphic data) files, varying in size from 1MB to 10MB, for other

computers in the same LAN. You have there a SCSI controller with 4 disks of 2 GB each, formatted

with FAT.

Required result: To optimize performance for optimum speed of access to local data files.

Optional results: Reconfigure for optimum speed of access to paging file.


Proposed solution:

Configure the first hard disk as boot partition. Configure the other 3 disks as a Volume Set. Use FAT

on all partitions. Place data on the Volume Set. Place paging file on the boot partition. Configure

binding order of protocols; move most used protocols to the bottom of binding order.







Answer: D

You have to administer 90 NT Workstations. Accounts are maintained by a PDC that is the only server

on the network. Users log on using accounts from the domain. You want to implement restrictions on

the NT Workstations so that the "Shut Down" option is disabled in the login dialog box.



Answer: A

You are the administrator of the CORP Domain. You create a System Policy for the Domain Users

Global Group, however Policy is not taking effect for 3 users. What is happening?


Note: Individual system policy

Group system policy

Default user profile

Mandatory user profile

The Administrator is going to leave the company (for good) and one NT Workstation has implemented

confidential information access as a per file and per user basis. You want a new user Barbara to take

over the administration duties.

A Rename Administrator

Having an NT Workstation 3.51 Intel 386 33 MHz CPU 16 MB RAM, you want to upgrade it to NT

Workstation 4.0 with the same settings as in the 3.51 version. What to do?


You have an NT 3.51 member server of DOMAIN1, now you also want the same computer to dual

boot also as an NT Workstation 4.0 sometimes. What to do?

A Install NT Workstation 4.0 in its own separate directory (not in the same of NT Server

3.51).

You need to install UPS that is listed in the HCL for your Windows NT Workstation. What are the 2

steps to install it?

A Connect UPS to any serial port with a pin that meets the UPS connection

requirements.


Answer: A, B.

You require a Windows NT Workstation to become a member of the CORP domain. What should you

do?


You want to move an NT Workstation from DOMAIN1 to DOMAIN2 not changing any other settings.

What to do?


Your computer is member of a workgroup. You want to map a network drive to a share on a server

PDC in the XYZ domain. The server has had the guest account disabled. Choose two options.




D In the map network drive box in explorer choose "log on using account" option


Answer: A, E

Why would you use SYSDIFF.EXE on an NT Workstation to setup other 300 identical computers with

the same applications?

A to automate installation of applications during the installation of the 300 NT


It is necessary to install NT Workstation with a set of applications over 100 identical new computers

and you want to automatically install all applications. What to do?

A Install first NT Workstation, run sysdiff /snap, install applications, run

What to do in order to add a path to an environment variable for a user application?

A Go to the System applet in the Control Panel, pick Environment tab, User Environment

and add the variable and path value as the user logged in.

Every time that you use Dial-Up Networking to connect to a Remote Server, the computer disconnects

after 3 seconds. What to do in order to trace the problem?



Answer: A

Situation (Long): You have to install 30 desktops and 50 laptops.

Required result: To automate the installation of NT Workstation on all computers.



Proposed solution:

Create 1 SETUP.INF for all computers. Create 1 UDF with unique hardware configuration for each

type of computer. Install NT Workstation on 1 type of computer, run sysdiff /snap, install suite of

applications, run sysdiff /diff, use unatttend.txt.






Note: They use UDF to specify hardware differences. UDF can only be used to change statements

from Unattend.txt.

Because there are 2 different types of computers (desktops, laptops) you need to create 2

Unattend.txt files

Answer: D

BruceO has an account on a NetWare Server 3.12-named Accounting and an account BruceO on his

NT workstation 4.0.

How do you configure CSNW on his workstation?

A Preferred server Accounting


C Tree Accounting

D Tree NetWare

Answer: (this one you should check for yourself)

You want to use Dial-Up-Networking to connect to workstation to a PPP server. Your Internet Service

Provider requires you to log on to a server and select a menu option that activates PPP on the server.

How do you do this?





Answer: B

Workstation and 5 applications need to be installed on 200 Intel computers. All will have identical

hardware and applications installed.

NT server will be the source of all installation files. Which files do you need?

Choose 3

A Poledit

B Unattended.txt

C Sysdiff

D Setup.inf

E UDF

F Windiff

You want to disable the Shutdown command from the Login Box. How to do this with a minimum of

administrative effort!


B Use Regedt32.exe

Note: watch for the word minimum. You can accomplish it with both options

Answer: A

John is a member of webmasters and users.

Local group Share permission Directory permission File permission

Webmasters Change WX Full Control

Users Read R R

Accessing files:

Permission is?

Share Directory Files

Everyone Read Full control Full control

What are the user rights for a:

Local user:

Remote user:

You are creating and sharing a new printer on your NT workstation 4.0

Users of Windows 95, workstation 3.5.1 and workstation 4.0 will also use this printer. You need to

install printer drivers. What should you do to accomplish this with a minimum of administrative effort?


B Install 4.0 drivers on your computer

Install 3.5.1 drivers on workstation 3.5.1 computers


C Install workstation 4.0 and 3.5.1 drivers on your computer

Install Windows 95 drivers on Windows 95 computer


Answer: D

30 laptops and 50 desktop computer

Required result: Automate installation NT workstation 4.0

Optional result: Join domain Corp

Automate installation application suite

Proposed solution: Create 1 Setup.inf file

Create 1 UDF file

Install workstation on one computer. Use sysdiff/snapshot. Install applications

and run sysdiff/diff.

Automate installation of NT workstation on all computers by using unattend.txt

and the appropriate portions of UDF.

Automate installation of applications by using sysdiff

Workstation

xxxxxxxxxxxxxxxxxxxxx

1. You print device becomes jammed while printing a document, and your application can't reprint the document. After you resolve the jamming of the paper, what should you do to successfully print the document that was damaged when the print device beca

a) from Document menu select Resume

b) cancel document and select Restart

c)

d) from View menu select Refresh, then from Document menu select Resume

Answer: b

2. You run winnt.exe from the CD-ROM and install NT Workstation, but, after reboot, when you try to install other applications from the CD-ROM, an error message appears: "NONCRITICAL ERROR. The external library procedure. CopysingleFile, have this info

a) hard drive is failing

b) the files already exist on the hard drive

c) the CD-ROM not supported by NT

d) the hard drive or CD-ROM controller is sharing an interrupt with another device

Answer: b

3. When a system policy and users profiles have a conflict, what happens?

a) user profiles have priority

b) system policy have priority

c) the least restrain with system policy and profiles

d) the most restrain with system policy and profiles

Answer: b

4. You install dial-up networking with default options. You then create a phonebook entry to connect to your ISP. How do you obtain an IP address for your workstation?

a) phonebook entry

b) ISP's PPP server

c) DHCP

d) current IP address of client PC

Answer: b

5.You install CSNW. What what functions can be performed?

a) connect to Netware volume

b) access Netware printers

c) run Syscon from workstation

d) run logon scripts when connecting to Netware server

e) access NDS vol and directories

f) logon to Netware 3.11 bindery server

g) act as a gateway for other Nt W/S

Answer: a,b,c,d,e,f

6. You are at a computer installed with NT Workstation and are a member of the workgroup RESEARCH. You want to map a network drive on your computer to an NT Server in the CORP domain. The Guest account is disabled in the CORP domain. How would you do i

a.log on to your workstation using your domain user account b.log on to your workstation using the account of a domain member c.in the log on box choose the domain name d.in the map network drive box in explorer choose "log on using account" option e.in the map network drive box in explorer choose "connect as" option

Answer: a,d (I’m sure about (d), not so sure about (a))

7. What service/protocol must you install to view stats on packet transfers on Ethernet network?

a) Streams environment

b) SAP

c) Network Monitor Agent

d) Performance Monitor

Answer: c

8. When Susan tested her display, the screen went blank. When she restarts, the Display properties dialog is opened. What’s could be wrong?

a.refresh rate b.resolution c.display type d.color pallette

Answer: c

9.A user tries to connect to a share on a Windows NT Workstation computer, but access is denied. The user on the NT Workstation computer changes the password. When a Windows 95 user tries to connect, he gets a message that his password has expired. Why? a.? b.User on NTW computer set "Users Must Log On In Order To Change Password" c.User on NTW computer set "Change Password At Next Logon"

Answer: b (When "Users Must Log On In Order To Change Password" is selected, users must get help from an administrator to change their passwords when they expire. If this option is cleared, users can change their passwords when they expire without an a

11. When you start your computer from a boot disk, your computer starts. When you try to start the computer from without the boot disk, you get the following message: ERROR in <wint./system32/ntkrnl. Ntkrnl missing or corrupt. Copy ntkrnl.... What s

a) copy NTKRNL to floppy

b) boot with setup disks and choose repair

c) change Boot.ini

d) replace floppy-drive

Answer: b

12. Where can you change time of booting NT? (Choose all that apply.)

a) In Control Panel / System / Startup-Shutdown-tab

b) Edit REGISTRY

c) Edit Autoexec.nt

d) Edit boot.ini

Answer: a, d

13. One of your applications hangs. Where can you see what went wrong?

Exhibit: Two windows next to each other: on the left Dr.Watson, on the right System Properties from Startup/Shutdown tab. Point to the correct box.

Option 1: put pointer on "write Debug info to: %SystemRoot%\MEMORY.DMP" in System Properties window

Option 2: put pointer on "Create Crash Dump" in Dr.Watson window

Answer: option 2

14. You want to install Winows NT Workstation but your CD-ROM is not listed on the HCL. How do you install it? a.boot to DOS, copy the I386 file to the hard drive and run winnt.exe b.run winnt.exe with the /b switch, which will force NT to copy the installation files to the hard drive c.boot to DOS, run winnt.exe from the CD-ROM

a.boot to DOS, run winnt32.exe from the CD-ROM

Answer: c

15. You want to automate the installation of Windows NT Workstation and a suite of 32-bit applications on 200 identical machines. What 3 files do you need to do this?

a) Windiff.exe

b) Answer file (unattend.txt)

c) UDF

d) Sysdiff.exe

Answer: b,c,d

16. Your computer is configured to dual-boot between MS-DOS and Windows NT Workstation. There is only one partition, formatted with FAT. You want to remove NT Workstation and you want to configure the computer to use MS-DOS only. What do you do?

a) run the rollback.exe utility

b) run Sys.com, delete NT files off the drive

c) Fdisk.exe

d) Sysdiff.exe

Answer: b

17. Your computer had Windows NT Server 3.51 installed. The computer is a member server in a domain. You want to install NT 4.0 Workstation and configure the machine to dual-boot. How do you do this?

a) Install NT Workstation 4.0 in the same directory as NT Server 3.51

b) Install NT Workstation 4.0 in its own directory

Answer: b

18. You want to install a tape device on your computer. Where must you install the device drivers for it?

a) Ctrl Panel, Network, Adapters

b) Add/Remove Devices

c) Ctrl Panel, Tape Device

d) Convert.exe

Answer: c

19. You are installing Win NT Workstation on a computer that does not have a network adapter. You want to install and configure the networking protocols during installation. How should you do this?

a) choose the generic adapter

b) Use MS Loopback

You want to search the registry for particular data in a value. What should you use?

a) Regedt32.exe

b) Regedit.exe

Answer: b

20. Three integrated 16-bit applications use shared memory to talk with each other. One of the applications keeps crashing it is stopping the execution of all other 16-bit Windows applications that are running. You want to continue using the three inte a.run the three integrated applications in the default Win16 NTVDM and run all the rest in their own memory space.

Answer: a

21. You install a new adapter in your computer and install the drivers. When you reboot, the screen is black. What is the first thing you should do to try to resolve the problem? a.call the manufacturer to request an NT compatible driver b.use the Last Known Good Configuration to restart your system and correct the problem c.use the emergency repair disk

Answer: b

22. The multilink option is enabled for three modems on your Workstation computer. The System Administrator decides to enable callback security on the RAS server. What effect will this have? a.You will not be able to use Multilink to connect to that server.

Answer: d

23. How do you change your password on a NetWare 3.x server using CSNW? a.Setpass b.Ctrl-Alt-Del, Change Password c.Syscom d.Control Panel / System/ Environment

Answer: a (cannot use Ctrl-Alt-Del because it requires NDS which is only available on Netware 4.x)

24. What protocol do you need to connect to an HP printer? a.Appletalk b.DLC

a.NetBeui b.TCP/IP

Answer: DLC

25. What happens when you run a 16-bit MS windows based application in its own memory space? (Choose 2) a.Application runs at higher priority b.Application uses less system memory c.Application can be preemptively multitasked d.Application cannot interfere with execution of other 16-bit windows based apps running at same time.

Answer: c,d

26. You install a 32-bit application designed for NT Workstation 4.0 that will use the computer's modem. What can you use to configure modem so it can be used by new application? a.Add/Remove program property dial up box from control panel b.Modem Property box from control panel c.Dialing Properties box from control panel d.Adapters page of network dial up box from control panel

Answer: c (They are referring to the Telephony applet in the Control Panel which, upon opening, is titled Dialing Properties. Telephony is where TAPI is located. TAPI-aware applications need to configure TAPI in the Dialing Properties window in order t

27. How are URL's resolved when using Dial-up networking? a.DNS b.WINS

a.Windows Explorer b.FTP

Answer: a (By using any web browser, Telnet application, FTP utility, or other TCP/IP utilities on the internet, you are probably using a DNS server.)

28. What two things do you need to know when connecting to an IP printer using network explorer? a.hostname and subnet mask b.printer name and ip address c.hostname and printername d.ip address and subnet mask

Answer: b (Users connect to a network printer by connecting to printer names that represent one or more print devices. Also, a network printer must have it’s own IP address in order to be located in the network.)

29.You want to set up 50 roaming profiles, ensuring that the clients keep their current profile. How do you do this?

a.copy all profiles to the PDC b.create a default profile and enable Replication

a.use User Manager for domain to set roaming profiles b.use a system policy to create a roaming profile for all users

Answer: a (The key words in this question are "ensuring that the clients keep their current profile." Only (a) offers the option of copying the users’ current profiles. (b) and (d) would entail changing the users’ current profile. (c) would only specif

30. You are the administrator of 100 NT Workstations that are members of the SALES domain. The SALES domain has 1 PDC and 1 BDC. You created a system policy for all user accounts and placed it on the PDC. When a user logs on, sometimes the system polic a.configure directory replication with the BDC b.place System policy for each user in their home directories c.modify each user's profile to ensure system policy runs d.copy system policy to all of NT Workstation computers

Answer: a

31. What is the smallest activity that can be scheduled by the processor / microkernel? a.thread b.unit c.process d.bit

Answer: a (Thread scheduling takes place at the microkernel layer which provides the most basic operating system functions. A "process" is made up of one or more threads. The other options don’t make sense.)

32. Smallest unit scheduled by a Scheduler service? a.application b.bit c.NTVDM d.process

Answer: d (Could find absolutely no documentation to back up this answer—beware!)

33. A user who is a member of the Users group wishes to share a file on her workstation. How can she

do this? a.log on as an administrator b.add user to Domain Users global group, then log off and log on again c.log on as usual d.join workgroup Users local group, then log off and log on again

Answer: a

34. You want to send a document from your Windows NT workstation computer to a printer that is located on another Windows NT WS computer. You want to do this without permanently installing drivers for that printer on your hard disk. What should you do? a.use "net print" to send the document to the printer b.drag and drop the document file onto the printer in Windows NT explorer c.use Windows NT Explorer to temporarily capture the printer, and then send the document to the printer d.use the Add Printer Wizard to temporarily connect to the printer, and then send the document to the printer.

Answer: b (I actually performed this operation, so I know it works.)

35. You are the administrator of a Windows NT Workstation computer that is used by three people. The users work different shifts in a facility that handles confidential information. The users want to maintain the security of their own files. They also a.Create a user account for each user b.? c.Create a home directory for each user on a NTFS partition d.Ensure the directory permission are configured so that users have exclusive access to their own home directory

Answer: a,c,d

36. Which control panel applet is used to configure modems? a.Modem applet b.Devices applet c.Services applet d.Adapter in network applet e.Dial-up Monitor applet

Answer: a (The Modem applet is the only option offered with which you can make any configurations to the modem. The Dial-up Monitor applet only monitors what is happening on the modem.)

37. What protocol/service do you need to send TCP/IP trap messages to another computer? a.SNMP b.Simple TCP/IP services c.NWLink d.Network monitor agent e.DHCP

Answer: a (A trap is data that indicates that the request failed authentication. The SNMP service sends a trap when it receives a request for information that does not contain the correct community name or does not match an accepted hostname for the se

38. How should you use an unattended.txt file (answer file) during the automated installation of a Windows NT Workstation on 100 identical new computers? a.to provide hardware-specific configuration information and other configuration data for the computers b.to provide user account information, a unique computer name, and a unique identifier specific to each computer c.to automate installation of applications on the computers during the installation of WinNT WS d.to place application specific registry data into the registry on each computer including serialization and registration data.

Answer: a

39. You suspect that someone is gaining unauthorized access to the computers on your network. You enable auditing of user login events. When you look at the Event Viewer security log three days later, you see that every account has more than 100 failed a.select the Account lockout radio button b.set a value in the spin control in the Maximum Password Age group c.set a value in the spin control in the Minimum Password Age group d.set the spin box control in the Password Uniqueness group to remember the 10 last passwords

Answer: a

40. You currently use Windows 95 and want to upgrade to Windows NT Workstation 4.0. How can you upgrade and retain the same user settings (desktop, preferences, etc.)? a.run Winnt.exe and Install Windows NT in the same directory as Windows 95 b.run Winnt32.exe and install Windows NT in the same directory as Windows 95 c.run Winnt.exe and install Windows NT in a separate directory, reinstall all the applications and reconfigure user environment under Windows NT, then remove Windows 95 d.it cannot be done because Windows 95 and Windows NT have different registry configurations.

Answer: c

41. How do you run an MS-DOS, Terminate and Stay Resident (TSR) application? a.start it in its own NTVDM b.start it in the default NTVDM c.start it using Config.nt d.start it using Autoexec.nt

Answer: b (Windows NT supports MS-DOS terminate-and-stay-resident (TSR), also called pop-up programs and memory-resident programs. Like any MS-DOS-based application you run in Windows NT, memory-resident programs run in the window in which they are sta

42. How do you start the command "ntbackup /r /e" with low priority? a.net start /low ntbackup /r /e b.start /low ntbackup /r /e c.cmd /low ntbackup /r /e d.run /low ntbackup /r /e

Answer: b

43. Your computer runs only Windows NT Workstation on an NTFS partition. You would like to remove

Windows NT and run MS-DOS. How would you do it?

A Run Sys.com



D use fdisk.exe to remove all the partitions, then use the MS-DOS setup disks to reinstall MS-DOS

Answer: D

44. You are planing to install NT Workstation with 5 applications on 200 Intel PCs. All PCs already have the same hardware and the same applications installed. You will install over the network with an NT Server as the source of installation. Which 3 f a.Unattend.txt b.Setup.inf c.Sysdiff.exe d.UDF

Answer: a,c,d

45. What do you need to have installed in your NT Workstation in order to change the password for a NetWare user? a.CSNW b.GSNW c.NWLink d.IPX/SPX e.FPSNW

Answer: a

46. BruceO has an account on a NetWare Server 3.12-named Accounting and an account BruceO on his NT workstation 4.0. How do you configure CSNW on his workstation? a.Preferred server Accounting b.Preferred server BruceO.Accounting c.Tree Accounting d.Tree NetWare

Answer: a

47. You want to use Dial-Up-Networking to connect to workstation to a PPP server. Your Internet Service Provider requires you to log on to a server and select a menu option that activates PPP on the server. How do you automate this logon process? a.create a script file in Dial-Up Networking b.configure Dial-Up-Networking to open a terminal window after dialing c.configure Dial-Up-Networking to open a terminal window before dialing d.NT 4.0 does not support this kind of Internet Service Provider

Answer: a

48. You want to disable the Shutdown command from the Login Box. How to do this with a minimum of administrative effort! a.create a system policy and save it in the Netlogon directory b.use Regedt32

Answer: c (Although using the registry (d) is a more direct way to make changes to policies, it can cause administrative headaches and is not recommended.)

49. Your computer has two ISDN adapters installed. Each adapter has two B-channels that can be used with Dial-Up Networking to connect to your company's RAS-server. The RAS server also has two ISDN adapters. Each B-channel has its own phone number. How a.Create a phone book entry for each ISDN B-channel. Connect to the RAS server by using all four entries b.Create one phone book entry that has the four phone numbers. Connect to the RAS server by using this entry c.Create one phone book entry for each ISDN adapter. Connect to the RAS server by using both entries d.Create one phone book entry that is configured to use multiple

lines. Assign a phone number to each line. Connect to the RAS server by using this entry.

Answer: b

50. You want to install Windows NT Workstation and applications on 100 identical new computers. You want to automate the installation of the applications. What should you do? a.Install Windows NT Workstation in the computer. Use Sysdiff to take a snapshot of the system. Install the applications on the computer, and use Sysdiff again to create a difference file. Install Windows NT Workstation on each computer, and use Sysdiff b.? c.? d.?

Answer: a

51. There are two servers, a Windows NT Server and a NetWare server, and you want your workstation running NT 4.0. What two protocols do you need to install so that the workstation can have access to directories on both servers. (Choose any two.) a.TCP/IP b.Netbeui c.NWLink d.CSNW

Answer: c,d

xxxxxxxxxxxxxxxxxxxxxxxx

mazsola.iit.uni-miskolc.humazsola.iit.uni-miskolc.hu/data/kmi/nt/mcp exam/f.back… · web...

Documents