ever efficient. ever reliable. ever … efficient. ever reliable. ever profitable. ......

EVER EFFICIENT. EVER RELIABLE. EVER PROFITABLE.

CHECK OUT THE NEW EVERGREEN PF & OM INSIDE!

Upgrade/Replace Indoor PSC Blower motors with Evergreen® IM

Replace OEM ECM X13 motors with Evergreen® EM

Replace OEM ECM X13 motors with Evergreen® CM

RESIDENTIAL/LIGHT COMMERCIAL HVAC SYSTEMS• Reduce truck stock• Increase energy savings• Increase comfort and home health• Decrease continuous fan noise and power consumption• Easy drop-in replacement - connects directly to fan boards or relays• Two year warranty

RESIDENTIAL/LIGHT COMMERCIAL HVAC SYSTEMS• Replaces X13 and similar Constant Torque ECM• Maintains system efficiency and performance• Compatible with OEM harness• Pre-programmed for truck stock• No complex wiring or configuration• Two year warranty

COMMERCIAL AIR HANDLER/PACKAGE SYSTEMS AND VAV APPLICATIONS• Replaces X13 and similar competitor Constant Torque ECM• Upgrade/Replace PSC motors in VAV and air handler applications• Precise air balancing using PWM or 0-10VDC controls• Pre-programmed for truck stock• No complex wiring or configuration• Two year warranty

INDOOR BLOWER APPLICATIONSPowered by ECM Technology

pg 2

Upgrade/Replace PSC Outdoor Fan motors with Evergreen® OM

Upgrade/Replace PSC Pedestal Fan motors with Evergreen® PF

EVERGREEN ® SOLUTIONSPowered by ECM Technology

• Drop-in replacement for induction motors

• Easy Retrofit – line voltage connections

• Quiet start and operation

• Dual rotation (CW/CCW)

• Efficiency up to 80%

• Two year warranty

pg 3

• Cost-effective solution to replacing entire fan assembly

• Drop-in replacement for original pedestal-fan motors

• Replaces 1/4 - 1/3 hp motors

• Dual rotation (CW/CCW)

• Easy Retrofit – power cord, switch and welded mount provided

• Quiet start and operation (3 speed by pull chain)

• Efficiency up to 82%


EVERGREEN MOTOR MOUNTS CAN BE FOUND ON PAGE 14

pg 4

DESIGNED TO REPLACE FACTORY PSC INDOOR BLOWER MOTORS IN HVAC SYSTEMS

With Evergreen IM, you’ll give your customers the efficiency

and comfort of a new ECM driven system, without replacing

the entire system. Simply replace their PSC motor with an

Evergreen IM. It’s not only easy to install, but it can also

reduce your inventory and increase your profits.

RELIABILITY• Encapsulated electronics

• Electronic Overload Protection

• 6kv surge protection


• UL and CSA recognized component

CONTRACTOR BENEFITS• Reduce truck stock and get the job done• No capacitors required • Connects directly to existing relays or circuit boards• No additional relays or wires needed• Automatically determines motor direction• 2 Motors replace the following ratings:

» 1/5, 1/4, 1/3, 1/2, 3/4 & 1 horse power » 115 & 208-230vac

» CW and CCW rotation » 1000-1075 RPM » Direct drive - 48 frame CONSUMER BENEFITS

• Energy Savings » Free Energy Savings Calculator App » Up to 25% more efficient in heating and

cooling modes• Quiet Operation

» On/Off Ramping • Optimized Continuous Fan Speed

» Energy Savings (up to 75% more efficient in continuous fan mode)

» Quiet operation (little to no air noise or draft) » Increases Comfort (destratification) » Increases Health (24hr operation of IAQ

products)• Constant Torque Technology

» Automatically supports airflow due to filter loading

Calculate energy savings quickly and easily with our Energy Savings Calculator.

Download the Dealer Toolbelt app which includes the Evergreen Energy Savings Calculator. Utility rebates available in some markets.

EVERGREEN STOCK NO. US MOTORS STOCK NO. AZURE/MARS STOCK NO. MARS STOCK NO. CENTURY STOCK NO.

6005 5520ET, 5521ET, 5530ET, 5531ET, 5522ET, 5532ET

10800* 10860* CSL1056, CS1056

6010 5540ET, 5541ET,

5550ET,5551ET, 5542ET, 5552ET

10801* 10861* CSL1106, CS1106

Evergreen IM Motors

Stock No. Cross Reference

Evergreen® IMReplaces Permanent Split Capacitor (PSC), direct drive, induction motors with the following ratings:

Horsepower: 1/4-1RPM Rating: 1075Voltage: 120 & 208-230Rotation: CW & CCW

NOT COMPATIBLE WITH EVERGREEN®

There are no generic replacements for Constant Airflow (Variable Speed) ECM. These motors can only be replaced with their OEM equivalent from an authorized distributor of the HVAC systems manufacturer.

Evergreen IM Motors

EVERGREEN ® IM APPLICATIONS

Constant Airflow (variable speed) Communicated ECM Genteq Models 2.0, 2.3, 2.5, 3.0, and Eon

[[PSCPSC]]

pg 5

STOCK HP VOLTS FLA RPM SPEEDS SHAFT DIM A DIM B

6005 1/2 (1/2,1/3,1/4) 115/230 6.7/4.0 1075 5 .5” x 5” (4.5” SF) 11.26” 6.34”

6010 1 (1,3/4,1/2) 115/230 11.0/6.7 1075 5 .5” x 5” (4.5” SF) 12.76” 7.84”

ROTATION: Reversible // FRAME: NEMA 48

* Evergreen IM can replace Azure when used in PSC mode, if used in X13 mode match to Evergreen EM

FURNACE AIR HANDLERS

Blower MotorBlower Motor]]

INCLUDES PACKAGE SYSTEMS

Evergreen®

• EMDESIGNED TO REPLACE OEM CONSTANT TORQUE STANDARD ECM INDOOR BLOWER MOTORS SUCH AS X13 OR EQUIVALENT COMPETITOR MODELS WITH 24VAC SPEED TAPS.

[115 OR 208-230VAC APPLICATIONS]


pg 6

Evergreen EM is a drop in replacement for Constant

Torque ECM such as X13 or equivalent competitor

models with 24vac speed taps. With no programming

requirements it’s ready when you need it at your local

HVAC distributor or on your truck. With no complex wiring,

you will get the job done quickly.






BENEFITS• Replaces X13 and similar Constant Torque ECM

with 24vac speed taps • Pre-programmed for truck stock, ready to use out

of the box • (5) 24vac speed taps (Low-High)• Compatible with OEM harness • No complex wiring or configuration • Automatically determines motor direction using

Genteq’s Rotation Sensing Technology• Maintains system efficiency and performance• Soft Start and Off Ramp for quiet operation

MULTI-PURPOSE

• Replace/upgrade PSC motors in applications that DO NOT require on/off delays such as Variable Air Volume (VAV), Fan Filter Units (FFU), A/C or heat pump only air handlers or package units. (Refer to installation manual for more details)

• (5) 24vac speed taps (Low-High)• (3) 18vdc speed taps (Low-Med-High)• PWM capable (600-1200rpm operating range)• Improves air balancing• Provides precise speed selection• 0-10vdc capable with separate harness• Low voltage signal harness provided with motor

Evergreen EM Motors

EVERGREEN ® EM APPLICATIONS

Constant Torque ECM Genteq X13 or Similar Competitors’ Models

Evergreen® EMReplaces OEM Constant Torque ECM built with 24v speed taps with the following ratings:

Horsepower: 1/3-1RPM Rating: 1070Voltage: 115 or 208-230Rotation: CW & CCW




pg 7


6103E 1/3 115 4.8 1075 5/PWM .5” x 5” (4.5” SF) 10.17” 5.25”

6105E 1/2 115 6.8 1075 5/PWM .5” x 5” (4.5” SF) 10.67” 5.75”

6107E 3/4 115 8.4 1075 5/PWM .5” x 5” (4.5” SF) 11.42” 6.5”

6110E 1 115 10.9 1075 5/PWM .5” x 5” (4.5” SF) 12.17” 7.25”

6203E 1/3 208-230 2.8 1075 5/PWM .5” x 5” (4.5” SF) 10.17” 5.25”

6205E 1/2 208-230 4.1 1075 5/PWM .5” x 5” (4.5” SF) 10.67” 5.75”

6207E 3/4 208-230 6.0 1075 5/PWM .5” x 5” (4.5” SF) 11.42” 6.5”

6210E 1 208-230 7.6 1075 5/PWM .5” x 5” (4.5” SF) 12.17” 7.25”





Evergreen®

• CMDESIGNED TO REPLACE OEM CONSTANT TORQUE STANDARD ECM INDOOR BLOWER MOTORS SUCH AS X13 OR EQUIVALENT COMPETITOR MODELS WITH 24VAC SPEED TAPS.

[208-230/277 OR 460VAC APPLICATIONS]


pg 8

Evergreen CM is a drop in replacement for Constant

Torque ECM such as X13 or equivalent competitor Torque ECM such as X13 or equivalent competitor

models with 24vac speed taps. With no programming

requirements it’s ready when you need it at your local

HVAC distributor or on your truck. With no complex wiring,

you will get the job done quickly.






BENEFITS• Replaces X13 and similar Constant Torque ECM

with 24vac speed taps • Pre-programmed for truck stock, ready to use out

of the box • (5) 24vac speed taps (Low-High)• Compatible with OEM harness • No complex wiring or configuration • Automatically determines motor direction using

Genteq’s Rotation Sensing Technology• Maintains system efficiency and performance• Soft Start and Off Ramp for quiet operation

MULTI-PURPOSE

• Replace/upgrade PSC motors in applications that DO NOT require on/off delays such as Variable Air Volume (VAV), Fan Filter Units (FFU), A/C or heat pump only air handlers or package units. (Refer to installation manual for more details)

• (5) 24vac speed taps (Low-High)• (3) 18vdc speed taps (Low-Med-High)• PWM capable (600-1200rpm operating range)• Improves air balancing• Provides precise speed selection• 0-10vdc capable with separate harness• Low voltage signal harness provided with motor

Evergreen CM Motors

EVERGREEN ® CM APPLICATIONS

Constant Torque ECM Genteq X13 or Similar Competitors’ Models

Evergreen® CMReplaces OEM Constant Torque ECM built with 24v speed taps with the following ratings:

Horsepower: 1/3-1RPM Rating: 1070Voltage: 208-230/277 or 460Rotation: CW & CCW




pg 9


6703 1/3 208-230/277 2.8 1075 5/PWM .5” x 4” (3.5” SF) 9.17” 5.25”

6705 1/2 208-230/277 4.1 1075 5/PWM .5” x 4” (3.5” SF) 9.67” 5.75”

6707 3/4 208-230/277 6.0 1075 5/PWM .5” x 4” (3.5” SF) 10.42” 6.5”

6710 1 208-230/277 7.6 1075 5/PWM .5” x 4” (3.5” SF) 11.17” 7.25”

6405 1/2 460 2.1 1075 5/PWM .5” x 4” (3.5” SF) 10.53” 6.61”

6407 3/4 460 3.2 1075 5/PWM .5” x 4” (3.5” SF) 11.28” 7.36”

6410 1 460 4.0 1075 5/PWM .5” x 4” (3.5” SF) 12.03” 8.11”





Evergreen®

• OMDESIGNED TO REPLACE FACTORY PSC OUTDOOR FAN MOTORS IN HVAC SYSTEMS

460v models 6903, 6905 & 6907

230v models 6301 & 6303

pg 10

Evergreen OM is a versatile high efficiency ECM designed

to replace induction motors (shaded pole or PSC) in outdoor

fan applications. These applications include motors used with

direct-drive fan propellers (axial fan blades) in A/C or Heat direct-drive fan propellers (axial fan blades) in A/C or Heat

Pump systems (including split or package systems).

FEATURES• Reduce truck stock• 230v model (stock #’s 6301 & 6303)• Two motors replace induction motors rated:

» 208-240 VAC » 1/10-1/3HP » 6-pole (1000-1100 RPM) & 8-pole (800-850 RPM) » CCW or CW » NEMA 48-frame with 1/2” shaft » Horizontal and Vertical Shaft Down (VSD) mounting

• 460v model (Stock #’s 6903, 6905 & 6907)• Three motors replace induction motors rated:

» 460 VAC » 1/3-3/4HP » 6-pole (1000-1100 RPM) & 8-pole (800-850 RPM) » CCW or CW » NEMA 48-frame with 1/2” shaft » Horizontal and Vertical Shaft Down (VSD) mounting

• Easy retrofit• 60º Ambient rated• Efficiency up to 80% for improved system efficiency• PWM enabled for multi-speed or low ambient controls• Quiet start and operation

RELIABILITY• Encapsulated electronics• Electronic Overload Protection • 6kv surge protection • Two year warranty • UL and CSA recognized component• 60° C Ambient Rating

EVERGREEN ® OM APPLICATIONS

Evergreen OM Motors


There are no generic replacements for Constant Speed Outdoor Fan ECM. These motors can only be replaced with their OEM equivalent from an authorized distributor of the HVAC system manufacturer.

Constant Speed Outdoor Fan ECM Genteq Models 142 & 142R

A/C & HEAT PUMP UNITSA/C & HEAT PUMP UNITSINCLUDES PACKAGE SYSTEMSINCLUDES PACKAGE SYSTEMS

[[Outdoor Fan MotorOutdoor Fan Motor

pg 11

[PSC]

Evergreen OM Motors

[ ]



6301 1/5 208-240 2.8 850/1100 2 .5” x 3” (2.5” SF) 8.49” 5.45”

6303 1/3 208-240 3.5 850/1100 2 .5” x 3” (2.5” SF) 8.99” 5.95”

6903 1/3 460 1.6 850/1100 2/PWM .5” x 6” (5.5” SF) 12.82” 6.77”

6905 1/2 460 2.5 850/1100 2/PWM .5” x 6” (5.5” SF) 13.57” 7.53”

6907 3/4 460 3.1 850/1100 2/PWM .5” x 6” (5.5” SF) 14.31” 8.27”

Evergreen®

• PFDESIGNED SPECIFICALLY FOR PEDESTAL AND WALL MOUNT FANS THAT ARE USED IN WAREHOUSES, FACTORY FLOORS, AMUSEMENT PARKS AND INSTITUTIONAL BUILDINGS.

EvergreenDESIGNED SPECIFICALLY FOR PEDESTAL AND WALL MOUNT FANS THAT ARE USED IN WAREHOUSES, FACTORY FLOORS, AMUSEMENT PARKS AND INSTITUTIONAL BUILDINGS.

RELIABILITYRELIABILITY• Encapsulated electronics





• Totally enclosed shell for maximum protection in industrial environments

pg 12

NUMBER OF FANS

1 5 10 25 50

CYCLEHOURS

8 $89 $444 $888 $2,220 $4,440

16 $178 $888 $1,776 $4,440 $8,880

24 $266 $1,332 $2,664 $6,660 $13,320

Savings based on $0.12/KWhr utility rate

ANNUAL ENERGY SAVINGS

The Evergreen PF is a drop-in replacement or

proactive upgrade for pedestal and wall mount fan

motors in warehouses, factory floors, amusement

parks, institutional buildings and other similar

applications. With a rated efficiency of up to 82% and applications. With a rated efficiency of up to 82% and

three operating speeds, Evergreen PF makes it easy

to provide energy savings and reduce operating noise.

BENEFITS• Efficiency up to 82%

» Power Savings of 75W-150W

» Free Energy Savings Calculator App

• Easy Retrofit

» Reversible rotation (reversing plug)

» 10’ power cord hardwired to motor

» Welded mount

• Quiet start and operation

• 3 speed selections

» Pull chain for easy speed selection

Calculate energy savings quickly and easily with our Energy Savings Calculator.

Download the Dealer Toolbelt app which includes the Pedestal Fan Energy Savings Calculator.Utility rebates available in some markets.

EVERGREEN ® PF APPLICATIONS

Evergreen PF Motor

pg 13

NIM10.2

ELOHNIARD81.

34348858#TESDROC021HTGNEL HCNI1

)"021(

13.2FER

Dim. B

Dim. A

NIM03.2

00.3 +-

90.00.

854.8444.TALLF0005.

5994.

36.5XAM

REETAWREWWORHT

NIAHCLLUPHCTIWS

GNORP3DEDLOMGULPCAV511)P51-5AMEN(

DEWEIVNOITATORNOITCERIDSIHTMORF

MOUNTING BOLTS FOR GRILL ARE 5.2” DIAMETER BOLT CIRCLE


6803 1/3 115 5.8 1160/970/650 3 .5” x 3” (2.5” SF) 8.99” 5.95”


MOTOR MOUNTS FOR EVERGREEN®

All Evergreen motors are NEMA 48-frame (5.6” diameter). If the failed motor has the same frame dimensions and uses a belly band mount, Evergreen will fit in the existing mount.

A new motor mount may be required if the old mount is connected to the motor around the bearing (resilient mount), or welded or bolted directly to the motor shell.

To determine the bolt hole diameter needed, measure the diameter of the air inlet. The bolt hole dimension must be larger than this dimension.

CATALOG # GA5569-10” bolt circleTorsion Flex

NEMA 48 Frame (5.6” dia.) 3 legs

*Not recommended for 3/4 HP or 1HP motors

CATALOG # 5K003

(10” bolt circle)

CATALOG # 5K004

(11” bolt circle)


CATALOG # 5K005 13” bolt circle


GENTEQ MOUNTING KITS

pg 14

MODEL STOCK HP VOLTS FLA RPM SPEEDS SHAFT DIM A DIM B

Evergreen IM(PSC Replacement)

6005 1/2 (1/2,1/3,1/4) 115/230 6.7/4.0 1075 5 .5” x 5” (4.5” SF) 11.26” 6.34”

6010 1 (1,3/4,1/2) 115/230 11.0/6.7 1075 5 .5” x 5” (4.5” SF) 12.76” 7.84”

Evergreen EM(X13 Replacement)

6103E 1/3 115 4.8 1075 5/PWM .5” x 5” (4.5” SF) 10.17” 5.25”

6105E 1/2 115 6.8 1075 5/PWM .5” x 5” (4.5” SF) 10.67” 5.75”

6107E 3/4 115 8.4 1075 5/PWM .5” x 5” (4.5” SF) 11.42” 6.5”

6110E 1 115 10.9 1075 5/PWM .5” x 5” (4.5” SF) 12.17” 7.25”

6203E 1/3 208-230 2.8 1075 5/PWM .5” x 5” (4.5” SF) 10.17” 5.25”

6205E 1/2 208-230 4.1 1075 5/PWM .5” x 5” (4.5” SF) 10.67” 5.75”

6207E 3/4 208-230 6.0 1075 5/PWM .5” x 5” (4.5” SF) 11.42” 6.5”

6210E 1 208-230 7.6 1075 5/PWM .5” x 5” (4.5” SF) 12.17” 7.25”

Evergreen CM(X13 Replacement/PSC upgrade in

commercial applications)

6703 1/3 208-230/277 2.8 1075 5/PWM .5” x 4” (3.5” SF) 9.17” 5.25”

6705 1/2 208-230/277 4.1 1075 5/PWM .5” x 4” (3.5” SF) 9.67” 5.75”

6707 3/4 208-230/277 6.0 1075 5/PWM .5” x 4” (3.5” SF) 10.42” 6.5”

6710 1 208-230/277 7.6 1075 5/PWM .5” x 4” (3.5” SF) 11.17” 7.25”

6405 1/2 460 2.1 1075 5/PWM .5” x 4” (3.5” SF) 10.53” 6.61”

6407 3/4 460 3.2 1075 5/PWM .5” x 4” (3.5” SF) 11.28” 7.36”

6410 1 460 4.0 1075 5/PWM .5” x 4” (3.5” SF) 12.03” 8.11”

Evergreen OM(PSC OutdoorReplacement)

6301 1/5 208-240 2.8 850/1100 2 .5” x 3” (2.5” SF) 8.49” 5.45”

6303 1/3 208-240 3.5 850/1100 2 .5” x 3” (2.5” SF) 8.99” 5.95”

6903 1/3 460 1.6 850/1100 2/PWM .5” x 6” (5.5” SF) 12.82” 6.77”

6905 1/2 460 2.5 850/1100 2/PWM .5” x 6” (5.5” SF) 13.57” 7.53”

6907 3/4 460 3.1 850/1100 2/PWM .5” x 6” (5.5” SF) 14.31” 8.27”

Evergreen PF(Pedestal FanReplacement)

6803 1/3 115 5.8 1160/970/650 3 .5” x 3” (2.5” SF) 8.99” 5.95”

EVERGREEN® SPECIFICATIONS OVERVIEW

pg 15


1325 Heil Quaker BoulevardLaVergne, TN 37086PH: 1-800-672-6495

thedealertoolbox.com

Cal l to order 1-800-672-6495

H V A C M O T O R R E P L A C E M E N T O P T I O N S B Y T Y P E A N D A P P L I C AT I O NINDOOR BLOWER MOTORS REPLACEMENT OPTIONS APPLICATION

Induction Motor (Shaded Pole or PSC) OEM PSC Generic PSC Evergreen IM

Pages 4-5

Constant Torque ECM (Genteq models X13 or Endura Pro) or equivalent competitors product w/24vac speed taps

OEM motor control only part

OEM complete part

(motor control and Motor)

Evergreen EM Evergreen CM

Pages 6-9

Constant Airflow (Variable Speed) ECM (Genteq models 2.0, 2.3, 2.5, Eon & 3.0)

OEM motor control only part

OEM complete part

(motor control and Motor)

NO GENERIC/RETROFIT

PARTS AVAILABLE

OUTDOOR FAN MOTORS REPLACEMENT OPTIONS APPLICATION

Induction Motor (Shaded Pole or PSC) OEM PSC Generic PSC Evergreen OM

Pages 10-11

Constant Speed ECM (Genteq models 142 and 142R)

OEM motor control only part NOT AVAILABLE

OEM complete part (motor control

and Motor)

NO GENERIC/RETROFIT

PARTS AVAILABLE


A/C & HEAT PUMP UNITSINCLUDES PACKAGE SYSTEMS


OEM = Original Equipment Manufacturer (Manufacturer of the HVAC Furnace/Air Handler/Package System)

Download the Dealer Toolbelt app, and Calculate energy savings quickly and easily with our Energy Savings Calculator.

Regal, Genteq and Evergreen are trademarks of Regal Beloit Corporation or one of its affiliated companies.

©2014, 2017 Regal Beloit Corporation, All Rights Reserved. MCB17003E • Form# G2100 • Printed in USA

ever efficient. ever reliable. ever … efficient. ever reliable. ever profitable. ......

Documents