evaglide corded tracks wave - evans textiles€¦ · corded right side, corded left side, corded...

1

TRACK MAKING

EVAGLIDE CORDED TRACKS WAVE

Version 1.0

For more guides and videos visit www.evans-textiles.com/resources

2

Here to help

At Evans, we understand the importance of getting things right for you and your clients.

That’s why we’ve put together this easy to follow step-by-step guide to help make things

easier for you.

In this guide we’ll cover product types, assembly information and chronologically set out

the instructions on how to put the product together. The guide is part of the ‘Evans

Difference’ giving our customers expert support which is designed to be easy to follow

and hassle free.


3

STEP 1, TRACK TYPE: -

Check track colour.

780019A

STEP 2, TRACK SIZE: -

Cut Track to specified size.

STEP 3, CORD LENGTH: -

Check overall cord length including drop and cut.

IMAGE 1 (780025A TRAVERS CORD)


4

STEP 4, CORD SIDE: -

Corded right side, Corded left side, Corded both.

MID STACK RIGHT OP MID STACK LEFT OP

STEP 5, CARRIER TYPE: -

Check carrier type and feed in to the track as below, if the carriers are Easy wave, Easy flex or Easy

fold they must be an even number.

EASYFLEX CHECK CARRIER DISTANCE EASYFOLD CHECK CARRIER DISTANCE

STEP 6, OVERLAP & UNDERLAP: - See below,

784002 (BUTT UPS) FOR EASYWAVE AND EASYFLEX


5

STEP 7, ENDCAP TYPE: - Long end pulley for pairs of curtain, long and short pulley for single stack

curtain which the long pulley on the corded side.

780024 BOTH SIDES FOR A PAIR 780024 AND 781150 FOR LEFT OP 781150 AND 780024 FOR RIGHT OP

TRACK ASSEMBLEY MID STACK CURTAIN, RIGHT OP IF LEFT HAND OP WORK FROM THE LEFT

SIDE OF THE TRACK: - Once all components have been picked feed the cord through the cord holes is

the cord pulley (see image 1), then feed the cord in to the track ensuring it is in the cord channels

correctly (see image 2) and pull all the way to the other side of the track, once the cord is completely in

the track apply the double cord connector to the string furthest away from you and do not fasten (see

image 3)

IMAGE 1 (780024 PULLEY) IMAGE 2 IMAGE 3 (780022 CORD CONNECTOR)

Then feed cord connector in to the butt up and feed in to the track ensure the cord connector enters the

cord channel (see image 4, 5)

IMAGE 4 (784002 butt up) IMAGE 5


6

Once the butt up is in the track then feed on the carriers, leave one extra carrier on and push on

endcap leaving the extra carrier trapped (see image 8). Then cut off the excess string (see image 9)

IMAGE 7 IMAGE 8 IMAGE 9

Then go to the opposite side of the track and apply a cord connector to the bottom corded and crew

this down in to place, leave one half of the cord free (see image 9), then set cord length on the tape

measure. To do this line the cord size on the tape measure and line this up with the end of the cord

connector (see image 10) then line the loop of the cord with the end of the tape measure, then cut the

cord at the start of the cord connector. Once cut burn the end of the cord with a lighter and press

together to stop it fraying, be careful not to burn yourself.

IMAGE 9 IMAGE 10

Then feed the cord trough the right hand pulley (see image 11), then add the cord to the cord connector

and screw down (see image 13)

IMAGE 11 (780024) IMAGE 12 IMAGE 13


7

Feed the cord connector in to the butt up (see image 14), then push the butt up in to the track and add

first carrier to the back of the butt up (see image 15) then feed all the carriers in to the track (see

image 16)

IMAGE 14 (784002 BUTT UP) IMAGE 15 IMAGE 16

Feed the endcap on to the track (see image 17) and trap the carrier string with the endcap and screw

down. Then screw down the left hand pulley (see image 19)

IMAGE 17 IMAGE 18

TRACK ASSEMBLEY SINGLE STACK OR DUAL: - Once all components have been picked feed the cord

through the cord holes is the cord pulley (see image 1), then feed the cord in to the track ensuring it is in

the cord channels correctly (see image 2) and pull all the way to the other side of the track, once the

cord is completely in the track add the end cap (see image 3), then turn the track over and screw the

endcap in place (see image 4)

IMAGE 1 (781150 SMALL PULLEY) IMAGE 2 IMAGE 3


8

IMAGE 4

Then go to the opposite side of the track and apply a cord connector to the bottom cord and Screw this

down in to place, leave one half of the cord free (see image 5), then set the cord length on the tape

measure. To do this line the cord size on the tape measure and line this up with the end of the cord

connector (see image 6) then line the loop of the cord with the end of the tape measure, then cut the

cord at the start of the cord connector. Once cut burn the end of the cord with a lighter and press

together to stop it fraying, be careful not to burn yourself.

IMAGE 5 IMAGE 6

Then feed the cord trough the right hand pulley (see image 7), then add the cord to the cord connector

and screw down (see image 9)

IMAGE 7 (780024) IMAGE 8 IMAGE 9


9

Feed the cord connector in to the butt up (see image 10), then push the butt up in to the track and add

first carrier to the back of the butt up (see image 11) then feed all the carriers in to the track (see

image 12)

IMAGE 10 (784002 BUTT UP) IMAGE 11 IMAGE 12

Feed the endcap on to the track (see image 13) and trap the carrier string with the endcap (refer back

to image 8-9 of the mid stack section) and screw down. Then screw down the left hand pulley (see

image 14)

IMAGE 13 IMAGE 14


10

BRACKET TYPE: - Check to see if this is top fixed brackets or wall fixed. If wall fix check the bracket

length.

780007 (STANDARD CEILING BRACKET) 783339 (CONCEALED CEILING BRACKET) 783012 (TOP FIX BRACKET WITH CAP)

780010 (3.5CM WALL BRACKET) 780011 (6CM BRACKET) 780012 (7.5CM BRACKET)

780013 (10CM BRACKET) 780014 (15CM DOUBLE BRACKET) 780015 (25CM TRIPLE BRACKET)

781022 (7-11CM ADJUSTABLE WALL BRACKET) 783997 (COVER CAP)


11

EASYFLEX, EASYWAVE, and EASYFOLD TAPE: - See Paul Naughton for tape calculations.

EASYFLEX AND EASYWAVE TAPE EASYFOLD TAPE 15.75CM

EASYFOLD TAPE (ORDINARY) 10.75CM EASYFOLD TAPE (XL) 15.75CM

***PLEASE NOTE ALL NOTES ALL CODES ABOVE ARE FOR WHITE TRACKS

IF COLOUR VARIES PLEASE SEE TEAM LEADER FOR GUIDANCE***


12

***BEFORE PAKCAGING TICK OFF EACH ITEM TO MAKE SURE NO STEPS

HAVE BEEN MISSED AND NO ITEMS ARE MISSING***

…and that’s it! You’re finished!

STEPS COMPLETE? Please tick

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7


13

Evan Textiles (Sales) Ltd, Helmet Street, Manchester, M1 2NT

Registered in England No. 6186585 Part of the Evans Group of Companies

evaglide corded tracks wave - evans textiles€¦ · corded right side, corded left side, corded...

Documents