euroimpianti - eurovertical (english)

6
Costumized systems Euro Vertical Aluminium profiles Powder coating Energy saving Automatic system

Upload: ipcm

Post on 25-Jul-2016

217 views

Category:

Documents


0 download

DESCRIPTION

2016

TRANSCRIPT

Page 1: Euroimpianti - EuroVertical (English)

The evolution of the seriesThe modular design and the standardization of the components provide unlimitedpossibilities of configurations.

EUROIMPIANTI SRLVia Cavour 44, 37067 Valeggio sul Mincio - VR (IT)Tel. +39 045 7950777 - Fax +39 045 [email protected]

EUROIMPIANTI DO BRASIL LTDAInd. de máquinas para pinturaRodovia SC 445, km 18 - 16815 PedreirasBalneário Rincão (SC) - BrasilFone +55 48 3443 2725 - Fax +55 48 3443 [email protected]

Costumized systems

EuroVertical

Aluminium profilesPowder coating

Energy savingAutomatic system

All technical data are to be considered purely indicative (average weight 4,5 kg/profile).

600

14502

Area m²

Speed (m/min)Profile / hourTon / hour

600

1,56803

Area m²

Speed (m/min)Profile / hourTon / hora

700

29004

Area m²

Speed (m/min)Profile / hourTon / hour

600

2,51125

5Area m²

Speed (m/min)Profile / hourTon / hour

800

1,56803

Area m²

Speed (m/min)Profile / hourTon / hour

Page 2: Euroimpianti - EuroVertical (English)

Self-cleaning boothContinuous scrolling walls

High-level automationEasy management with only one operator

Walls with convex cornersMinimum powder dispersion outside the coating area

Rotating hooksUniform powder thickness

MonocycloneHigh performance of powder recovery (98%)

Double guns groupInside and outside automatic cleaning

EuroVertical

Technological cycle

Cascade pre-treatmentSurfaces of aluminum profiles must be pre-treated before coating. The process is made of different active solutions followed by stages of washing and our system combines cascades and spray ramps.

Drying in ovenAfter surface treatment process, profiles move into a warm air circulation oven, which ensures their complete dryness. Inside the oven, ventilation is uniform and tempera-ture is stable.

Powder coatingOnce surfaces are fully dry, profiles are ready for the powder coating. Powder on profiles is applied by means of electrostatic guns. One operator can manage all au-tomatic booth operations and also handle a quick color change.

Polymerization in the oven.Powder coatings polymerize at a temperature of about 200°C. The oven is designed based on the most recent energy efficiency and clean energy technologies.

Cooling on-lineThe last step is the cooling of the surface, profiles hang on the overhead conveyor until unloading. All our systems can be easily integrated with packaging lines.

Aluminium profiles

Flexibility for production

Quick change color

Energy efficiency

Easy maintenance

Worldwide warranty

• SpeedUp • Quick color booth

680

3

0,75

340

1,5

SpeedUp system is a complete coating plant composed of a modular pre-treatment tunnel, a self-cleaning coating booth and an oven. It is already designed for future increasing of productivity, till doubling the starting speed.

Speed (m/min)

Profile / hour

Ton / hour

1,5

Total area: 300 m2

Before After

Speed (m/min)

Profile / hour

Ton / hour

48 hours

1 Loading

2 Pre-treatment tunnel

3 Drying oven

4 Quick Color booth

5 Curing oven

6 Unloading

1

2

3

4

5

6

• Washing tunnel• Made in Inox 304 / 316 L• Cascade system

• Monorail overhead conveyor• Double reail overhead conveyor• Load capacity 150 or 250 kg/m

• Oven with air fogs• Insulation thickness 200 mm• Heating recovery from cooling of profiles

• Quick color change • Sole operator • Automatic and fast cleaning

• Oven with air fogs • Insulation thickness 200 mm• Direct heating

Page 3: Euroimpianti - EuroVertical (English)

Self-cleaning boothContinuous scrolling walls

High-level automationEasy management with only one operator

Walls with convex cornersMinimum powder dispersion outside the coating area

Rotating hooksUniform powder thickness

MonocycloneHigh performance of powder recovery (98%)

Double guns groupInside and outside automatic cleaning

EuroVertical

Technological cycle

Cascade pre-treatmentSurfaces of aluminum profiles must be pre-treated before coating. The process is made of different active solutions followed by stages of washing and our system combines cascades and spray ramps.

Drying in ovenAfter surface treatment process, profiles move into a warm air circulation oven, which ensures their complete dryness. Inside the oven, ventilation is uniform and tempera-ture is stable.

Powder coatingOnce surfaces are fully dry, profiles are ready for the powder coating. Powder on profiles is applied by means of electrostatic guns. One operator can manage all au-tomatic booth operations and also handle a quick color change.

Polymerization in the oven.Powder coatings polymerize at a temperature of about 200°C. The oven is designed based on the most recent energy efficiency and clean energy technologies.

Cooling on-lineThe last step is the cooling of the surface, profiles hang on the overhead conveyor until unloading. All our systems can be easily integrated with packaging lines.

Aluminium profiles

Flexibility for production

Quick change color

Energy efficiency

Easy maintenance

Worldwide warranty

• SpeedUp • Quick color booth

680

3

0,75

340

1,5

SpeedUp system is a complete coating plant composed of a modular pre-treatment tunnel, a self-cleaning coating booth and an oven. It is already designed for future increasing of productivity, till doubling the starting speed.

Speed (m/min)

Profile / hour

Ton / hour

1,5

Total area: 300 m2

Before After

Speed (m/min)

Profile / hour

Ton / hour

48 hours

1 Loading

2 Pre-treatment tunnel

3 Drying oven

4 Quick Color booth

5 Curing oven

6 Unloading

1

2

3

4

5

6

• Washing tunnel• Made in Inox 304 / 316 L• Cascade system

• Monorail overhead conveyor• Double reail overhead conveyor• Load capacity 150 or 250 kg/m

• Oven with air fogs• Insulation thickness 200 mm• Heating recovery from cooling of profiles

• Quick color change • Sole operator • Automatic and fast cleaning

• Oven with air fogs • Insulation thickness 200 mm• Direct heating

Page 4: Euroimpianti - EuroVertical (English)

Self-cleaning boothContinuous scrolling walls

High-level automationEasy management with only one operator

Walls with convex cornersMinimum powder dispersion outside the coating area

Rotating hooksUniform powder thickness

MonocycloneHigh performance of powder recovery (98%)

Double guns groupInside and outside automatic cleaning

EuroVertical

Technological cycle

Cascade pre-treatmentSurfaces of aluminum profiles must be pre-treated before coating. The process is made of different active solutions followed by stages of washing and our system combines cascades and spray ramps.

Drying in ovenAfter surface treatment process, profiles move into a warm air circulation oven, which ensures their complete dryness. Inside the oven, ventilation is uniform and tempera-ture is stable.

Powder coatingOnce surfaces are fully dry, profiles are ready for the powder coating. Powder on profiles is applied by means of electrostatic guns. One operator can manage all au-tomatic booth operations and also handle a quick color change.

Polymerization in the oven.Powder coatings polymerize at a temperature of about 200°C. The oven is designed based on the most recent energy efficiency and clean energy technologies.

Cooling on-lineThe last step is the cooling of the surface, profiles hang on the overhead conveyor until unloading. All our systems can be easily integrated with packaging lines.

Aluminium profiles

Flexibility for production

Quick change color

Energy efficiency

Easy maintenance

Worldwide warranty

• SpeedUp • Quick color booth

680

3

0,75

340

1,5

SpeedUp system is a complete coating plant composed of a modular pre-treatment tunnel, a self-cleaning coating booth and an oven. It is already designed for future increasing of productivity, till doubling the starting speed.

Speed (m/min)

Profile / hour

Ton / hour

1,5

Total area: 300 m2

Before After

Speed (m/min)

Profile / hour

Ton / hour

48 hours

1 Loading

2 Pre-treatment tunnel

3 Drying oven

4 Quick Color booth

5 Curing oven

6 Unloading

1

2

3

4

5

6

• Washing tunnel• Made in Inox 304 / 316 L• Cascade system

• Monorail overhead conveyor• Double reail overhead conveyor• Load capacity 150 or 250 kg/m

• Oven with air fogs• Insulation thickness 200 mm• Heating recovery from cooling of profiles

• Quick color change • Sole operator • Automatic and fast cleaning

• Oven with air fogs • Insulation thickness 200 mm• Direct heating

Page 5: Euroimpianti - EuroVertical (English)

The evolution of the seriesThe modular design and the standardization of the components provide unlimitedpossibilities of configurations.

EUROIMPIANTI SRLVia Cavour 44, 37067 Valeggio sul Mincio - VR (IT)Tel. +39 045 7950777 - Fax +39 045 [email protected]

EUROIMPIANTI DO BRASIL LTDAInd. de máquinas para pinturaRodovia SC 445, km 18 - 16815 PedreirasBalneário Rincão (SC) - BrasilFone +55 48 3443 2725 - Fax +55 48 3443 [email protected]

Costumized systems

EuroVertical

Aluminium profilesPowder coating

Energy savingAutomatic system

All technical data are to be considered purely indicative (average weight 4,5 kg/profile).

600

14502

Area m²

Speed (m/min)Profile / hourTon / hour

600

1,56803

Area m²

Speed (m/min)Profile / hourTon / hora

700

29004

Area m²

Speed (m/min)Profile / hourTon / hour

600

2,51125

5Area m²

Speed (m/min)Profile / hourTon / hour

800

1,56803

Area m²

Speed (m/min)Profile / hourTon / hour

Page 6: Euroimpianti - EuroVertical (English)

The evolution of the seriesThe modular design and the standardization of the components provide unlimitedpossibilities of configurations.

EUROIMPIANTI SRLVia Cavour 44, 37067 Valeggio sul Mincio - VR (IT)Tel. +39 045 7950777 - Fax +39 045 [email protected]

EUROIMPIANTI DO BRASIL LTDAInd. de máquinas para pinturaRodovia SC 445, km 18 - 16815 PedreirasBalneário Rincão (SC) - BrasilFone +55 48 3443 2725 - Fax +55 48 3443 [email protected]

Costumized systems

EuroVertical

Aluminium profilesPowder coating

Energy savingAutomatic system

All technical data are to be considered purely indicative (average weight 4,5 kg/profile).

600

14502

Area m²

Speed (m/min)Profile / hourTon / hour

600

1,56803

Area m²

Speed (m/min)Profile / hourTon / hora

700

29004

Area m²

Speed (m/min)Profile / hourTon / hour

600

2,51125

5Area m²

Speed (m/min)Profile / hourTon / hour

800

1,56803

Area m²

Speed (m/min)Profile / hourTon / hour