establishment as raw materials of choice in many industrial sectors, new technical applications,...
TRANSCRIPT
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
7. Forschungsrahmenprogramm der EU (2007-2013)Thema 4: NanoMatPro
Produktion + Integration
Dr. Helmut Rempp
Projektträger Forschungszentrum Karlsruhe
Bereich Produktions- und Fertigungstechnologien
Nationale Fachkontaktstelle Produktion
Bonn, den 16. Januar 2007
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Projektträger PTKA-PFT Bereich Produktions- und Fertigungstechnologien
1) Rahmenkonzept „Forschung für die Produktion von morgen“■ ca. 200 gestartete Verbundprojekte
■ Über 35 Ideenwettbewerbe zu neuen Themen
■ Transfer und Nutzung von FuE-Ergebnissen Industriearbeitskreise, Karlsruher Arbeitsgespräche März 2008 Präsentationen, Ergebnisberichte
2) Weitere nationale Aufgaben■ InnoRegio und Existenzgründungen aus Forschungseinrichtungen
3) Europäische Aktivitäten■ Nationale Fachkontaktstelle für Produktion (NKS/NCP)
■ EUREKA Umbrella FACTORY
■ PM administrativ
■ ERA-NET Projekte
■ MANUFUTURE
50 Beschäftigte in Karlsruhe und Außenstelle Dresden- mehr als 9000 Vorhaben in 35 Jahren- mehr als 3 Mrd. € Projektkosten
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Ergebnisse aus dem 6. RP - 3. Aufruf NMP
IP 2. Stufe TI einstufig IP-KMU 2. Stufe
Koordination - erfolgreich
- davon deutsch koordiniert
217
33,3%
6711
16,5%
15 0
0%
Partnerbeteiligung- erfolgreich
- davon aus DE
479109
22,7%
57196
17,4%
32850
15,2%
Mittelrückfluss nach DE
25,5% 18% 15,8%
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Technologieplattformen mit Bezug zu Produktion
■ Sustainable Chemistry SusChem
■ Steel ESTEP
■ Industrial Safety
■ Robotics EUROP
und …….
■ Future Manufacturing Technologies: MANUFUTURE
Informationen: http://cordis.europa.eu/technology-platforms/home_en.html
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
MANUFUTURE (1)
■ Manufacturing Platformnicht branchenorientierthorizontale, koordinierende Querschnittsplattformunter industrieller Führung22+ 8 nationale MANUFUTURE-Plattformenspeziell MANUFUTURE Deutschland (VDMA, FhG-IPA)
www.manufuture.de
■ DokumenteVision PaperStrategic Research Agenda SRA (Lang- und Kurzversion) Implementation Plan
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
MANUFUTURE (2)
■ Strategic Research Agenda SRA Roadmap für eine F&E-Infrastruktur auf Weltniveau neue Geschäfts- und Organisationsmodelle lebenslanges Lernen Günstige Wirtschafts- und Rahmenbedingungen für Investitionen und
Unternehmertum Stärkung des öffentlichen Vertrauens in Wissenschaft und Technologie
■ 4 MANUFUTURE-Konferenzen 12/2003 in Mailand IT 12/2004 in Enschede NL (Vision) 12/2005 in Derby UK (SRA) 10/2006 in Tampere SF (Implementation)
■ SSA LEADERSHIP
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Thema 4: NanoMatPro Übergeordnete Zielsetzungen
improve the competitiveness of EU industry (including SMEs) and
ensure its transformation through:
■ the effective transition from a resource-based to knowledge-based industry
■ strengthening EU leadership in nano, materials and production technologies
■ generation of new breakthrough and applicable knowledge■ emphasis on integrating different technologies and disciplines
across many sectors
So, meeting the challenge of new industrial revolution and global competition, creating new industries, not only stop the relocation
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.3 New Production - final WP 22.12.2006 -
Objective:
create continuously innovating production
capabilities to achieve leadership in industrial
products & processes in the global marketplace
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Funding Schemes - Instruments in NMPFunding Schemes - Instruments in NMP
■ Collaborative projects consortia with participants from different countries new knowledge, technology, products or common resources for
research size, scope and internal organisation of projects can vary funding scheme
large scale integrating projects > 4 Mio € (“large”) SME-focussed projects “35%” (“SME”) small or medium-scale focussed research projects <= 4 Mio € (“small”)
one topic one funding scheme 2-step-procedure
■ Coordination and Support Actions CSA networking, exchanges, transnational access to research
infrastructures, studies, conferences, etc.
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Erfolgreicher Anträge im 6. RP
Durchschnittswerte und Bandbreite ausgewählter Produktionsanträge
Instrument
(IP/ IP-KMU/ STREP)
1. Aufrufrunde NMP(3/ 7/ 11)
2. Aufrufrunde NMP(8/ 12 / 7)
3. Aufrufrunde(8/ 15/ 1)
■ Integrierte Projekte (IP)PartnerFörderung
37 (31 – 45)19 M€ (16 - 23 M€)
26 (17 - 50)14 M€ (8,5 - 17,7M€)
20 (17 – 23)8,8 M€ (6,7- 11,7M€)
■ Integrierte Projekte für KMU (IP-KMU)
Partner Förderung
28 (11 - 52)5,9 M€ (3,4 - 8,2 M€)
26 (16 - 36)6,1 M€ (4,2 - 7,4 M€)
22 (12 – 33)6,2 M€ (3,7 - 8,2 M€)
■ Spez. gez. Forschungs- projekte (STREP)
Partner Förderung
12 (8 – 19)3,1 M€ (1,8 - 5,6M€)
10 (8 - 20)2,4 M€ (1,8 -3 ,9 M€)
6
2,4 M€
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.3.1 Development and validation of new industrial models and strategies
■ New manufacturing and business models for knowledge basedfactories, tailored for the needs of European manufacturers
….catering for changing market requirements & changing product- and production technologies
….covering all aspects of product and process life-cycle ….allowing European industries to successfully compete and grow in
the global market place
■ coupled with factory systems integration ….efficient systems networks based on European Standards
Identified Y1 topics:-1 Beyond Lean Manufacturing – New Industrial Models for Product and Process Life Cycle - large-2 New added-value user-centered products and product services - SME-3 Integrated risk management in industrial systems – large (IMS)
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.3.2 Adaptive production systems
■ Production systems and elements for knowledge based factories ….supporting continuous optimal adaptation of production resources
and processes ….and small to single batch oriented production ….as well as resource efficient and sustainable production processes
■ through holistic manufacturing engineering concepts ….and integration of affordable intelligent technologies and process
control
Identified Y1 topics:-1 Rapidly configurable machines and production systems - small-2 Process intensification in chemicals production - small
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.3.3 Networked production
■ Tools and methods for highly dynamic networked production ….aiming at global production capability ….including design and innovation of high value-added products ….resource efficient and sustainable production processes
■ development of competencies ….in design innovation, network configuration and partner
identification ….production ramp-up and optimal operation
Identified Y1 topics:-1 Innovative customer-driven product-service design in a global environment – small (IMS)
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.3.4 Rapid transfer and integration of new technologies into the design and operation of manufacturing processes
■ Development of knowledge based engineering capacities ….supporting integration of knowledge & new technologies into design
and operation of new processes ….pushing processes beyond current performance borders ….resource efficient and sustainable production processes
■ drawing on in-depth understanding of machine, process and system behaviour
….through knowledge sharing and knowledge distribution ….and integration of modelling, simulation and virtual production tools
Identified Y1 topics:-1 Rapid manufacturing concepts for small series industrial production - SME-2 Innovative pathways in synthesis - improving efficiency by smart synthesis, design, and reduction of the number of reaction steps - small
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.3.5 Exploitation of the convergence of technologies
■ Stimulating the creation of new industries ….by facilitating the design, engineering and manufacturing of the next
generation of high value-added products ….based on science ….aiming to create disruptive products and production systems
■ exploiting the opportunities, integration and convergence of technologies e.g. in the nano-, bio-, info- and cognitive science fields
….through application of basic research results ….in a number of fields, initial focus being in micro and
nanomanufacturing
Identified Y1 topics:-1 Processes and equipment for high quality industrial production of 3- dimensional nanosurfaces - large-2 Production technologies and equipment for micro-manufacturing - large
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.4 Integration of technologies for industrial applications - final WP 22.12.2006 -
Objective:
Accelerate the rate of industrial transformation
by exploiting the application potential of new
generic technologies
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.4 Integration of technologies for industrial applications
■ Integration of new knowledge and technologies from nano-, materials-, and production technologies
….speeding up the industrial transformation ….adopting a safe, socially responsible and sustainable European
approach ….new applications and step-change solutions responding to major
challenges
■ addressing in particular the needs identified by concerned European Technology Platforms
….in sectoral and cross-sectoral applications
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Technologieplattformen mit Bezug zu Integration
■ Steel ESTEP
■ Future Textiles & Clothing FTC
■ Construction Technology ECTP
■ Forest based Industries FORESTRY
■ Road Transport ERTRAC
■ Rail ERRAC
Informationen: http://cordis.europa.eu/technology-platforms/home_en.html
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.4 Integration of technologies for industrial applications
■ Health equipment, drug delivery, sensors, imaging, bio-implants,
regenerative medicine, etc
■ Construction Demonstrate the shift to knowledge-based, client-focused and
sustainable construction : based on life-cycle, safety, new product and process strategies; integrating nano-developments, functional materials with intelligent construction processes, etc
■ Chemistry Industrial bio-,material technologies, process equipment and
process life-cycle approaches for process development of “green” chemicals etc…;
■ Environment covering sustainable mineral resources Eco-innovation in a wide spectrum of environmental technologies
etc …;
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.4 Integration of technologies for industrial applications
■ Textiles and clothing Establishment as raw materials of choice in many industrial sectors,
new technical applications, customised and intelligent production
■ Forestry, paper and pulp Extended multifunctional use of resources, eco-processes,
packaging, composite and hybrid materials etc…;
■ Mechanical and electromechanical engineering Next generation of intelligent machinery and automation systems
etc …;
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
4.4 Integration of technologies for industrial applications
4.4.0-1 Advanced wood-based composites and their production – large
4.4.0-2 Application of new materials including bio-based fibres in high-added value textiles products – SME
4.4.0-3 Multifunctional materials for the future vehicles – large
4.4.0-4 Substantial innovation in the European medical industry: development of nanotechnology-based systems for in-vivo diagnosis and therapy – call coordinated with Theme 1 “Health” – large
4.4.0-5 Resource efficient and clean buildings – large (ICPC)
4.4.0-6 Innovative added-value construction product-services - SME
4.4.0-7 ERA –Net on Construction - CSA
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Internationale Kooperation
■ mit Drittländer (ICPC) in allen Projekten möglichspeziell angesprochen in
4.4.0-5 Resource efficient and clean buildings – large
■ globale Initiative „Intelligent Manufacturing Systems“ IMS
4.3.1-3 Integrated risk management in industrial systems – large
4.3.3-1 Innovative customer-driven product-service design in a global environment – small
■ Wissensgenerierung und Markterweiterung
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Ausblick auf zukünftige Themen
■ Kapitel V: Indicative priorities for future call(s)ohne Angabe des genauen Zeitpunktesohne Angabe des Förderschemas (groß, klein, KMU)
■ ThemenNeue Produktion: 21 Themen Integration: 40 Themen, inkl. Joint bzw. Coordinated CallsERA-NET (+): 8 Themen
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Weitere „Initiativen“
■ ERA-NET-Projekte im Bereich Produktionsforschung SUSPRISE: Nachhaltiges Unternehmen (9 Länder) eTRANET: IKT in traditionellen Fertigungsunternehmen (14 Länder) MNT: Mikro- und Nanotechnologien (16 Länder) MANUNET: Produktionstechnik (Regionalansatz)
■ ERA-NET+ Umsetzung erfolgreicher ERA-NET-Projekte, z.B. MNT Nationale und EU-Förderung
■ Artikel 169 EUROSTARS: EU-EUREKA-Initiative für FTE-intensive KMU
21 Mitgliedstaaten mit 42 M€ EU-Beitrag noch nicht festgelegt für Mitte 2007 geplant Themenunabhängig
Weitere Projekte geplant
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Brokerage-Aktivitäten
Mikro-Nano:■ Informations- und Brokerage-Tag zu
Mikro- und Nanotechnik und –fertigung■ Brüssel 24. Januar 2007■ http://www.micronanomanufacturing.eu/■ Online Brokerage Webseite
Manufacturing in FP7:■ 17./18. Januar 2007 Cardiff UK
inkl. Mikro-Nano-Fertigung
■ http://fp7manufacturing.iproms.org/
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Leistungen der NKS Information
Telefon-Hotline
Informationsdienst
Antragsberatung Auswahl der Fördermöglichkeit (RP7, ERA-NET PLUS, Art. 169, national)
7.RP: Unterstützung bei der Entscheidung Thema und Instrument
Koordination mit der deutschen Forschungsförderlandschaft
Unterstützung von der ersten Idee bis zum Hearing und Vertragsverhandlungen
Begleitung von Konsortien
Teilnahme an Vorbereitungs- und Planungsgesprächen
Klärung von Fragen mit der EC
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Informations- und Beratungsdienst
Telefon-Hotline: 0 7 2 4 7 / 8 2 - 4 5 7 5
Telefax: 0 7 2 4 7 / 8 2 - 2 8 9 1
e-Mail: [email protected]: http://www.produktionsforschung.de/pft/ncp
Das NKS-Team bei PTKA-PFT im FZK
Bei Interesse melden Sie sich bitte mit unserem Anmeldeformular an!
7. RP – NMP Produktion + IntegrationAuftakt 16.1.2007
Abkürzungen■ NKS/NCP Nationale Kontaktstelle/ National Contact Point■ 7. RP/FP7 7. Europäisches Forschungsrahmenprogramm ■ NMP Nanosciences, Nanotechnologies, Materials and New Production Technologies (Theme 4 of
the specific programme „Cooperation“)■ KMU/SME Kleine und mittlere Unternehmen/ Small and medium-sized enterprises■ ICPC International Co-operation Partner Countries■ SRA Strategic Research Agenda■ IRC Innovation Relay Center
Projekttypen und Initiativen im 7. RP■ „Large“ Large Scale Integrating Project > 4 Mio € (Collaborative project)■ „Small“ Small or Medium-Scale focussed Research Project <= 4 Mio € (Collaborative project)■ „SME“ SME-focussed Project “35%” (Collaborative project)■ CSA Coordination and Support Action■ ETP European Technology Platform■ JTI Joint Technology Initiative ■ ERA-NET (PLUS) (Europäische) Unterstützung der Zusammenarbeit und Koordinierung von
nationalen/regionalen Forschungsprogrammen ■ IMS Intelligent Manufacturing Systems
Instrumente im 6. RP■ IP Integrated Project■ TI Traditional Instruments (STREP, CA, SSA)■ CA Coordination Action■ SSA Specific Support Action■ STREP Specific Targeted Research Project