Home About us Products Applications Knowledge Service Contact

Fire Systems

Small Control Panels

System IQ8Control

System FlexES Control

Extinguishing System

Displays and Operating Units

Power Supplies

Key Boxes

Data Transmission

Network

Automatic Detectors

Manual Call Points

Transponders

esserbus

Accessories for esserbus

Transponders

Technical Alarm Modules

Wireless Components

Detectors for Special Applications

Alarm Devices

Door Release System

Installation & Service

Voice Alarm Systems

Management Systems

Part No.:

Approval:

esserbus FSA transponder for fire doors808619.10

VdS

Description

The transponder is suitable for usage for various applications: in stand-alone

operation or on the esserbus. In esserbus operation, the Series 9200 automatic fire

detectors and those of the IQ8Quad family (see features for types) can be used as

detectors in door arrester systems (FSA - Fire, Failure and Shut-Off). In FSA

transponder loop operation, the door arrester system status is indicated on the fire

alarm control panel.

For stand-alone operation, detectors of the IQ8Quad family are supported without

loop isolator (see features for types).

For operation, the transponder requires an external supply voltage. It is possible to

monitor this voltage.

Features

Only one loop address is needed per transponder

Usage of series 9200 intelligent detectors (such as OT, OTI, O²T detectors) as

FSA detectors is possible

Connection of IQ8Quad O detectors (Part No. 802371), TD Detectors (Part No.

802271), OT detectors (Part No. 802373) and O²T detectors (Part No. 802374)

(DIBt-approved) as FSA detectors is possible

FSA detectors programmable as devices in the loop

Status indicator of door arrester system to the FACP

Actuation of the locking device also via the automatic fire detectors in non-FSA

operation

Stand-alone operation of the FSA transponders is possible

Usage of IQ8Quad O detectors (Part No. 803371), TD detectors (Part No.

803271) and O²T detectors (Part No. 803374) in stand-alone operation of the FSA

transponders to the standard detector group is possible

Max. 100 transponders per FACP

Max. 32 transponders per analog loop

Max. 127 detector zones per analog loop

Detector numbers per zone input of the transponder:

Max. 30 conventional detectors (without SOC)

Max. 10 conventional detectors (with SOC)

Max. 10 Manual call points

Max. 10 Technical Alarm Modules (TAM/TAL)

Technical DataOperating voltage 10 ... 28 V DC

Current consumption max. 28 mA (from UB ext)

Quiescent current @ 12 V DC approx. 6 mA (from UB ext)

Contact load relay max. 30 V DC/1 A or 48 V DC/0,5 A

Ambient temperature -5 °C ... 50 °C

Storage temperature -25 °C ... 75 °C

Type of protection IP 40 (with housing)

Air humidity < 95 % (non-condensing)

Username

Password

login

Customer Login

Forgot password?

register

Press Area

Are you looking for more information

about our company? Please find all

press publications in our press area.

more

search...

Worldwide Language

ESSER by Honeywell: Details https://www.esser-systems.com/en/produkte/details/transponders/esser...

1 of 2 8/10/2014 9:28 PM

Weight approx. 70 g

Dimensions W: 72 mm H: 65 mm D: 20 mm (PCBoard)

Accessories

788612 Loop isolator PCB

788603.10 Module housing for C-mounting bar or top hat rail mounting

788600 Housing surface mount, gray

788650.10 Housing surface mount, white

788601 Housing flush mount, gray

788651.10 Housing flush mount, white

808625 EOL-Z

Additional information

Corresponding connection examples for FSA transponder operation in stand-alone

operation or as a device in the fire detection System 8000 can be found in the

chapter containing automatic door release systems.

Legal Notice Privacy Statement Sitemap © Copyright Honeywell International Inc 2005-2014

ESSER by Honeywell: Details https://www.esser-systems.com/en/produkte/details/transponders/esser...

2 of 2 8/10/2014 9:28 PM