esk /sk / csk series dm / cm series portable series
TRANSCRIPT
● Chennai ● Coimbatore ● Trichy ● Pan India
www.sanmacmachines.com
● ESK /SK / CSK series
● DM / CM series
● 94430 50170
● 98421 50170
● 94430 30170
● Portable Series
Busbar Processing Machines
Page 1 of 6
Salient Features
Common Feature for all the above
oSiemens PLC for Bending station o Embossing
oHorizontal & Vertical Bending o Flattening
oU Shaped Bending o Twisting of cable joints
oTwisting o Tools for special applications
Technical Specification
303 ESK 503 ESK 803 ESK 303 CSK 303 SK
Electric Motors Nos. 3 3 3 1 3
Pumps & Valves Nos. 3 3 3 1 3
Bending Control
Force Max. Punching/ Bending Kn 300 500 800 300 300
Punching Dia. Range mm ф4.3 - ф25 ф4.3 - ф30 ф4.3 - ф34 ф4.3 - ф25 ф4.3 - ф25
Max. Thickness mm 12 16 20 12 12
Max. Width mm 160 200 250 160 160
Max. Shearing Thickness mm 12 16 20 12 12
Max. Shearing Width mm 160 200 250 160 160
Max. Width mm 160 200 250 160 160
Max. Thickness mm 12 16 20 12 12
Max. Width mm 100 120 120 100 100
Min. Angle Deg. 90 90 90 90 90
Electrical
PowerMain Motor KW 3 x 4.0 3 x 5.5 3 x 5.5 1 x 4.0 3 x 4.0
Bending precision ± 1* ± 1* ± 1* ± 1* ± 1*
Repeatability ± 0.3* ± 0.3* ± 0.3* ± 0.5* ± 0.5*
Double Table - CNC Function Particulars
JPSK Busbar Processing Machines - ESK / CSK / SK Series
Single Table - CNCUnit
CNC
Scope
CNC
Punching
Shearing &
Cutting
Horizontal
Bending
Vertical
Bending
CNC accuracy Deg.
Note: Specifications are subjected to changes without prior notice for the improvement of the product
ESK Series CSK Series SK Series
o Three Pumps + Three Motors o All stations can work simultaneously o Separate Elevated Table for Bending o Cutting & Bending Operation will not foul o Suitable for continuous production
o Programmable Bending
o Single Pump + Single Motor o One Station can work at a time o Selector Switch for change of station o Standard Table for Bending
o Programmable Bending
o Three Pumps + Three Motors o All stations can work simultaneously o Standard Single Table o Programmable Bending
Page 2 of 6
Salient Features - DM Series Salient Features - DM Series
Optional Accessories:
o Horizontal Bending o Flattening
o Vertical Bending o Twisting
o U Shaped Bending o Pressing of Cable Joints
o Embossing o Tools for special applications
Electric Motors Nos.
Pumps & Valves Nos.
Bending Control
Force Max. Punching Force Kn
Punching Dia. Range mm
Max. Thickness mm
Max. Width mm
Max. Shearing Thickness mm
Max. Shearing Width mm
Max. Bending Force Kn
Max. Width mm
Max. Thickness mm
Max. Width mm
Min. Angle Deg.
Electrical
PowerMain Motor KW
160
300
160
12
100
90
1 x 4.0
160
300
160
12
100
90
3 x 4.0
303 CM
1
303 DM
3
Single Table - Conventional Bending Function Particulars Unit
Note: Specifications are subjected to changes without prior notice.
Scope 1
Conventional - Non CNC
300
ф4.3 - ф25
12
160
12
3
300
ф4.3 - ф25
12
160
12
Punching
Shearing &
Cutting
Horizontal
Bending
Vertical
Bending
JPSK Busbar Processing Machines - DM / CM Series
Technical Specification
o Three Pumps + Three Motors o All Stations Simultaneous operations
o Standard Table for Bending & Cutting
o Non CNC - Manual Bending.
o Measuring Scale fitted on the Table for
measuring & checking
o Single Pump + Single Motor o Only one Station can work at a time
o Selector Switch provided for changing
station o Standard Table for Bending & Cutting
o Non CNC - Manual Bending
o Measuring Scale fitted on the Table for
measuring & checking
DM / CM Series
Page 3 of 6
Salient Features Scope of Supply
● JPMX 301A : CWC150 + CH60 + CB150D + HB 700A + Table
● JPMX 301B : CWC200 + CH70 + CB200A + HB 700A + Table
Hydraulic Cutting Machine
Model Output (Tons)Width
(mm)
Thickness
(mm)Weight (kg)
CWC 150 15 150 10 26
CWC 200 20 200 12 35
Hydraulic Punching Machine
Model Output (Tons)
Deep
Throat
(mm)CH 60 31 96
CH 70 35 115
Hydraulic Bending Machine
Model Output (Tons)Width
(mm)
Thickness
(mm)Weight (kg)
CB 150D 15 150 10 17.5
CB 200A 20 200 12 24
Hydraulic Electric Pump
ModelRated Pressure
(mpa)
Motor
Power
(KW)
Hyd. Oil
Tank (L)Weight (kg)
HB 700A 63 0.75 5 28
Hydraulic Hand Pump
ModelRated Pressure
(mpa)Weight (kg)
CP 700 63 8
Mould Configuration
(mm)
ᴓ10.5, ᴓ13.8, ᴓ17.0, ᴓ20.5
ᴓ10.5, ᴓ13.8, ᴓ17.0, ᴓ20.5
● JPMX 401B : CWC200 + CH70 + CB200A + HB 700A + Table with
Vertical + Horizontal Bending
570 x 140 x 150
Dimensions (mm)
350 x 270 x 490
Dimensions (mm)
12
Models Offered
Technical Specification
Note: Specifications are subjected to changes without prior notice
410 x 275 x 180
430 x 340 x 200
Thickness (mm)
10
Dimensions (mm)
JPSK Busbar Processing Machines - Portable Unit
o Portable Light Duty Model o All stations can be fitted on Table
o Moveable Table with Wheels
o Works on 220V - Single Phase
o Punching Unit o Shearing Unit o Bending Unit - Manual o Movable Table for mounting stations o Portable Hydraulic Pump with Motor o Hydraulic Hand Pump
Punching Unit
Hydraulic Elec. Pump
Shearing Unit Bending Unit
Hydraulic Hand Pump Moveable Mounting Table
Page 4 of 6
JPSK's Automation Range
Standard & Optional Accessories
● CNC Busbar Punching & Shearing Machine 200E-6P ● CNC Busbar Bending Machine 50Z-H ● CNC Busbar Bending Machine 50ZPS
Components out of Busbar Bending
Bending Station Six Station Turret Punching Flat Bar Shearing
Page 5 of 6
Jinan Jing Peng CNC Machinery Co. Ltd., founded in 2008 is one of leading Hitech enterprise highly specialised in
Busbar Punch, Shear & Bending machines.
Since its establishment, Jing Peng has always adhered to the business philosophy of "Quality First", taking
customer satisfaction as the main focus point. JPSK products are exported to over 50 countries across the world.
JPSK do produce world-class, high value products for their Global customers. This global network reach
combined with the quality of the machines, make JPSK on of the best choice when it comes to
Busbar applications. JPSK products are received well in Europe, North America, South America, South East Asia,
India and the Middle East. JPSK is a partner of First-Line brands such as ABB, Siemens and Schneider globally.
All key components of the machines are made in-house at their most modern plant and automated
production lines. JPSK uses the latest control system to ensure high efficient production and quality.
Jing Peng is ISO-9001 certified by BVQI, and the products meet the CE safety requirements and regulations
JPSK has over 50 machines working in India since 2018 and the numbers are increasing month on month.
Sales & Service
Continuous Improvement
Authorised Indian Distributors:
Jinan Jing Peng CNC Machinery Co. Ltd.,
Jinan
Dealer Network: Chennai, Bangalore, Kochi, Pune, Mumbai, Ahmedabad, Nagpur, New Delhi, Kolkata, Hyderabad
Ph: 98421 50170, 94430 50170; E Mail: [email protected]; www.sanmacmachines.com
JPSK has a good quality control system and every machine coming out of the factory goes through strict qulaity
control check. Every machine comes with a full Pre Delivery Inspection Report.
Warranty
JPSK is constantly working on continuous improvement of the product matching international
ABOUT
Sales Off : T-348, SIDCO Industrial Park, Thirumullaivoyal, Chennai 600 062. Tamilnadu
Quality Control
For more details, kindly get in touch with our Team.
Tools & Punches
JPSK can off wide variety of Tools, Punches & Dies, Shearing Blades as per customer requirement and application.
Every machine produced at JPSK offer 12 months warranty against any manufacturing defects
JPSK products are supported by a well structured Engineering team in India for Pre Sales & After Sales support.
Sanmac Machines has network of Channel Partners who are trained in managing Pre / After Sales support.
Replacement spares required are stocked at Chennai and are available to customer at short notice.
Page 6 of 6