esds lcd navigation map v2.1

- 1 -

EonStor DS Series LCD Navigation MapFor FW 3.85 or Later

Ver 2.1 February 2011

DS S12F-G1433 Ready

View and Edit Logical Drives

HOLD

View and Edit Drives

View and Edit Logical Volume

View and Edit Host LUNs

View and Edit Channels

View and Edit Peripheral Dev

System Functions

View System Information

View and Edit Event Logs

View and Edit Config Parms

Navigating the LCD Menu

ESC

Steps back to the previous menu. (Moves left)

ENT

Proceeds to the next step. (Moves right)HOLD

Long press the ENT key.

Selects the menus or parameters.

• Long-press (HOLD) the ENT key to enter the menu.

• Use to scroll.

• Use ESC to step back.

• See the next page for other conventions.

Press 2 Seconds for Main Menu

ENT

Entering the main menu

Switching the Controller

DS S12F-G1433 P Ready

1. At the top right corner, the “P” sign shows Primary controller.

2. Press and hold the Up and Down keys together for one second.

3. The sign changes to “S,” showing Secondary controller.

- 2 -

Conventions and Notes

Initializing... Please Wait

Power on Self Test, Please Wait

Power on Self Test Completed

DS S12F-G1433 1GB RAM, Wait...

DS S12F-G1433 Ready

Parameters

Critical messageto scroll

2010/11/22 16:03 Critical Generalized Target Event Peripheral Set 0 Device ALERT PSU1 Failure Detected

ENT

DS S12F-G1433 Ready

Term Emul EnableParameters and context-sensitive menu items are marked in italic.

(S12F-G1433 is a model name.) (Enable is a parameter.)

Optional menu Dotted line indicate optional menus that will appear only under certain conditions.

Press 2 seconds Skip View Events

HOLD Clear

Power-up sequence

LG=0 R5 DRV=4 25500MB GD SB=0

LG=1 Not Defined?

Existing logical drives Undefined logical drives

Password input If you have set the password, changing settings might require entering the password. ConfirmHOLD

Enable Adaptive Write Policy ?

Enabled Disabled

HOLDInput Password _

to select, ENT to enter

0 1 2 3 4 5 6 7 8 9 . ! “ # $ % & ‘ ( ) * + , - / : ; < = > ? @ [ ] ^ _ ‘ { | } a b c d e f g h i j k l m n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V X Y Z

( Full Character list )

Character entry Some menu items require you to enter numbers or characters. Scroll down to select the character and press ENT to select. HOLD the ENT key to finish the entry.

* Available characters vary.

Change Enter LD: _


Shown to the right is the sequence of menus that appear on power-up or system reset.

When a critical event occurs, a notice will appear onscreen. Scroll down the list to read the whole message and HOLD the ENT key to clear the message.

- 3 -

Logical Drive 1/3 – Existing Logical Drives

View and Edit Logical Drives


ENT ENTView Drives

ENTSlot=4 238214MB LG0 LN HDT722525

Delete Logical Drive

Logical Drive Name

Existing logical drives

LDs that are not part of an LV

ENTChange LD Name: Name ?

HOLDChange Enter LD: _


Migrate Logical Drive

LDs that are not part of an LV

Expand Logical Drive

ENTExpandable Size 229714MB

ENTMaxsiz=229714MB SetTo 229714MB?


HOLD Confirm

HOLD Confirm

Initialization Mode Online

ENTInitialization Mode to Offline?

HOLD Confirm

Online Offline

Execute Expand Logical Drive

ENTExecute Expand logical Drive?

HOLD Confirm

Add DrivesWhen drives are available

to select

ENTDelete LG ID=1DB25FA6 ?

HOLD Confirm

ENTMigrate Logical Drive ?

Initialize Progress

ENTInit Online 12%

Initialization, addition, migration

ENTAdd Drv Selected To select drives

ENT

HOLDAdding 12% □_______________

Slot=1 238214MB FRMT DRV HDT7225

ENTSlot=1 238214MB *LG=0 SL_JDT7225

Slot=* 238214MB FRMT DRV HDT7225

ENTSlot=* 238214MB *LG=0 SL_JDT7225

… Last member

to select First member

RAID Level > 3

After initialization

HOLDMigrating 12% □_______________

Logical Drive Assignment

ENTAssign LG To Slot B ?

Slot A Slot B

HOLD Confirm

Regenerate Parity

LG=1 Not Defined?

Undefined logical drives

- 4 -

Logical Drive 2/3 – Existing Logical Drives (Continued)

Regenerate Parity

ENTOverwrite When Inconsistency

ENT

Events On When Inconsistency

Overwrite ----------------- Enable Disable

HOLD Confirm

to select

ENTEvents ----------------- Enable Disable

HOLD Confirm

to select

Execute Parity Check

ENTExecute Parity Check ?

HOLDReparity 30% □□□□__________

Copy and Replace Drive

ENTEnter to Select a On-line Drive


to select

Progress

Write PolicyENT

Write PolicyTo ----------------- Default Write-Back Write-Through

HOLD Confirm

Shutdown Logical Drive

HOLD ConfirmENTShutdown LG ID=2609795E ?

Restart LDHOLD ConfirmENT

Restart LD?After shutdown

After initialization

ENTEnter to Select One New Drive


to select

ENTCopy and Replace Drive ?

HOLD

Copy&Replace 30% □□□□__________

ProgressMedia Scan

ENTPriority Normal

ENT HOLD Confirm

Iteration Count Single Time

ENTIteration Count ----------------- Single Time Continuous

HOLD Confirm

to select

to select

Execute Media Scan

ENTExec Media Scan

?HOLD Confirm

Priority Normal ? ----------------- Low Normal Improved High

Undelete/Restore LD List

ENTLG R1 DRV=0 931GB DELETED

to select

ENTView Drives

ENTSlot=5 953609MB LG2 LN Hitachi H

to select

Undelete Logical Drive

ENTUndelete LG ID=22017771 ?

Deleted LD Available

to select

Not applicable to RAID 0 and NRAID

HOLD Confirm

- 5 -

Logical Drive 3/3 – Undefined Logical Drives

LG=1 Not Defined?

HOLDCreate New Logical Drive

ENT

Undelete/Restore LD List

to selectUndefined logical drives


TDRV=4 Create LG Level=RAID 6 ? ----------------- 6 5 3 1 0 NRAID

HOLDRAID Selected To Select Drives

ENTLG=0 R5 DEV=0 25500MB DELETED

to select

ENTView Drives

ENTSlot=4 238214MB FRMT DEV HDT7225

to select

Undelete LG ID=1DB25FA6 ?

HOLD Confirm

Slot=1 238214MB FRMT DRV HDT7225

ENTSlot=1 238214MB *LG=0 SL_JDT7225

Slot=* 238214MB FRMT DRV HDT7225

ENTSlot=* 238214MB *LG=0 SL_JDT7225

… Last member

Change Logical Drv Parameter

ENT

When deleted LDs exist

ENTMaximum Drive Capacity

ENTMaxsiz=238214MB SetTo 238214MB ?

HOLD Confirm

Spare Drive Assignments

ENTSlot=3 238214MB FRMT DRV HDT7225

to select

ENTSlot=3 238214MB LG=0 SL_HDT7225

Disk Rev. Space 256MB

Write Policy Default

ENT HOLD ConfirmWrite Policy ----------------- Default Write-Back Write-Through

HOLD

Confirm

HOLDInit Online 12% □_______________

Create Logical Drive?

HOLD


Logical Drive Assignments

ENTRedund Ctlr LG Assign to Slot B

Redund Ctlr LG Assign to Slot A

HOLD Confirm

Existing logical drives

- 6 -

Logical Volume 1/2 – Existing Logical Volumes

View and Edit Logical Volume

LV=0 24GB GOOD 5A8C0CC43C1DBIF6

ENT ENTView Logical Drivers

ENTLG0 RAID5 DRV=4 25500MB GD SB=0

Delete Logical Volume

Partition Logical Volume

Existing logical volumes

Unmapped logical volume

Logical Volume Name

ENTName: _

HOLD Confirm

Expand Logical Volume

ENTExpand Size: 12076MB ?

HOLD Confirm



Change Write Policy

ENTWrite Policy ----------------- Default Write-Back Write-Through

HOLD Confirm

to select

LV=0 Part=0 10GB

ENTAdd Partition

ENTAdd Partition

?Partition Size- 12076

ENTMaxsiz=12076MB SetTo 12076MB?

HOLD Confirm

Partition name Name

ENTName: _

HOLD Confirm

Expand PartitionENT

Expand Size: 12076MB ?

HOLD Confirm



Delete PartitionENT

ENT

ENT

to select

to select

LV=0 Not Defined ?

Undefined logical volumes

ENTDelete Logical Volume ?

Delete In Progress

HOLD

When free space is available

Delete Partition ?

Delete In Progress

HOLD

Unmapped logical volume

When space is available

Expand Logical Volume

ENTExpand Size: 12076MB ?

HOLD Confirm

to select, ENT to enter Existing partitions

Existing partitions

Existing partitions

Logical Volume Assignments

ENTAssign LV To Slot B?

HOLD Confirm

Slot A Slot B

- 7 -

Logical Volume 2/2 – Undefined Logical Volumes

LV=0 24GB GOOD 5A8C0CC43C1DBIF6

Existing logical volumes

LV=0 Not Defined ?

Undefined logical volumes

HOLDLG=A0 R5 DRV=3 1862GB GD S=0

ENT *G=A0 R5 DRV=3 1862GB GD S=0

LG=A1 R5 DRV=3 1862GB GD S=0

ENT *G=A1 R5 DRV=3 1862GB GD S=0

… Last member

Change Logical Vol Parameter

ENT

Name LV0

Write Policy Default

ENT HOLD ConfirmWrite Policy ----------------- Default Write-Back Write-Through

HOLDCreate in progress

Create Logical Drive?

HOLD


Logical Volume Assignments

Redund Ctlr LG Assign to Slot B

Redund Ctlr LG Assign to Slot A

HOLD Confirm

HOLD ConfirmENT

ENTName: _

HOLD Confirm


HOLD

- 8 -

Host LUN

View and Edit Host LUNs

CHL=0 ID=112 Slot A

ENT


Edit Host ID/WWN Name List

ENT210000113329337AE Name

ENTAdd Host ID/WWN Name List

ENTAdd Host ID/WWN Name List ?

Del Host ID/WWN Name List

ENTDel Host ID/WWN Name List ?

HOLD Confirm

No Name List Create Name?

HOLDHost-ID/WWN Not Set

ENTHost ID _

Name- Not Set

ENTEnt Name _

HOLD Confirm

When there is no name list

HOLD Confirm


HOLD Confirm

to select

HOLD Confirm

Mapto Volume 5CE709170F0F0F10

CH0 ID112 Set1 No Mapped

ENTDelete CH0 ID112 LUN=0 Mapping ?

HOLD Confirm

ENTMap Host LUN

ENTLV=0 24GB GOOD 5A8C0CC43C1DB1F6

to select *LV=0 Part0 21GB

ENTMap Host LUN

?ENT

to select

HOLD

Confirm

ENT

- 9 -

Drive 1/5 – Members of a Logical Drive


Slot=1 238214MB LG0 LN HDT722525

ENT ENTView Drive Information

ENTRevision Number: A96A

Serial Number: VDS41BT4E597HJ

Disk Cap(blks): 488386559

to select

Slot=12 ABSENTOpen Slot

Identify DriveENT

Flash All Drives ?

Flash Selected Drive ?

Flash All But Selected Drive ?

ENTFlash Drive(s) In Progress !

C=2 I=12 SES SAS-Exp 715X

Only drive information viewable

Dsk Rev. Space: 256 MB

Clone Failing Drive

ENTReplace After Clone

ENTReplace After Clone ?

Perpetual Clone

ENTPerpetual Clone ?

HOLDClone & Replace Successful!

HOLDClone & Replace Successful!

Spare drive available

Spare drive available

- 10 -

Drive 2/5 – Spare Drives







to select

Delete Spare Drive

ENTDelete Spare Drive ?

HOLDDelete Spare Drive Successful!

Identify DriveENT

Flash All Drives ?





ENTRemove Disk Reserved Space ?

HOLD

Drives unassigned to LDDisk Reserved Space Removed!

Media ScanENT

Priority Normal

ENTPriority Normal ? ----------------- Low Normal Improved High

HOLD

to select

Confirm

Iteration Count Single Time

ENTIteration Count Single Time ?

HOLD

Single Time Continuous

Execute Media Scan

ENTExec Media Scan

?HOLD Confirm

Abort Media Scan

ENTAbort Media Scan ?

HOLD2010/01/01 00:37 Critical

to scroll

Media Scan 12% □_______________

Scan in progress

View Media Scan Progress

ENT

Scan in progressMedia Scan 12% □_______________

Task Schedule List

- 11 -

Drive 3/5 – Spare Drives: Task Schedule

Task Schedule List

ENT2011/01/17 15:30 Global Spare Drv

Add Media Scan Task Schedule ?

No existing schedule

Existing schedules

to select

HOLDView Schedule Information

Add New ScheduleENT

Add Media Scan Task Schedule ?

Delete ScheduleENT

Delete the Task Schedule ?

HOLD Confirm

Exec on Init: NO

Start Date: 2011/01/17 15:30

ENT

Schedule Period Execute Once

Execution Mode: Concurrence

Priority: Normal

Select Target: Global Spare Drv

ENT

HOLDExec on Ctlr Init: NO

ENTExec on Ctlr Init: NO ?

HOLD Confirm

Yes No

Start date NOT SET

ENT[MMDDhhmmYYYY] _


HOLD Confirm

Execution Period NOT SET

ENT HOLD

to select

Confirm

Priority Normal

ENT HOLD

to select

Confirm

Select Target: NOT SET

HOLD Confirm

ENTAll Assigned Drives

Select a Drive NOT SET



Execution Mode Concurrence

ENTExecution Mode Concurrence ?

HOLD Confirm

Sequence Concurrence

Priority Normal ? ----------------- Low Normal Improved High

to select

All Global Spare Drives

All Eligible Drives

HOLD Confirm

Execution Once ? ----------------- Once 1 secs … 8 weeks

HOLD

- 12 -

Drive 4/5 – Formatted Drives


Slot=10 953609MB FRMT DRV Hitachi





to select

Add Local Spare Drive

ENTLV=0 R1 DRV=2 232GB GD SB=0

to select

HOLDAdd Local Spare Drive Successful

Add Global Spare Drive

ENTAdd Global Spare Drive ?

HOLDAdd Global Spare Drive Successful

Add Enclosure Spare Drive

ENTAdd Enclosure Spare Drive ?

HOLDAdd Spare Drive Successful!!

Identify DriveENT

Flash All Drives ?





ENTRemove Disk Reserved Space ?

HOLDDisk Reserved Space Removed!

- 13 -

Drive 5/5 – Unformatted Drives







to select

Add Local Spare Drive

ENTLV=0 R1 DRV=2 232GB GD SB=0

to select

HOLDAdd Local Spare Drive Successful

Add Global Spare Drive

ENTAdd Global Spare Drive ?

HOLDAdd Global Spare Drive Successful

Add Enclosure Spare Drive

ENTAdd Enclosure Spare Drive ?

HOLDAdd Spare Drive Successful!!

Identify DriveENT

Flash All Drives ?




Dsk Rev. Space: Unformatted

ENTFormat Disk Reserved Space ?

HOLDDisk Reserved Space Formatted!

Drives UtilitiesENT

Drive Read/Write Test

ENTView Read-Write Status Progress

ENTRW Test 12% □_______________

Abort Read-Write Test

ENTAbort Read-Write Test ?

HOLD

Confirm

- 14 -

Channel

CH0=Host ID=112 SXF=Auto

ENTSet SCSI Channel ID

View Channel Host-ID/WWN

View Device Port Name Lists(WWPN)

Data Rate

View and Edit Channels

ENT

CH2=Drv SXF=3.0G

ENTCHL=0 ID=112

ENTAdd Channel SCSI ID

ENTAdd CHL=0 ID=113

?HOLD NOTICE: Change

made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller, operation may not proceed normally.

to scroll

ENT

Delete Channel SCSI ID

ENTDelete ID=112

?

ENTID=0 WWNN 500D02300806905F

ENTWWPN 2100001B329337AE

ENT Set CHL-0 Data Rate to= 4.0G? ----------------- 4.0G 3.0G 2.0G 1.5G 1.0G Auto

to scroll

ENT

to select

ENT Confirm

5(D)=RCC SXF-3.0G

Fibre/iSCSI models

ENTAdd Host-ID/WWN Label ?

HOLDHost-ID/WWN Name Name_


HOLDWWPN(Name) 2100001B329337AE

NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller, operation may not proceed normally.

to select

to select

to select

to selectto select

Drive channels

RCC channels

Confirm

Host channels

( Optional )

- 15 -

Configuration Parameter 1/4 – Communication Parameters, Caching Parameters

Communication Parameters

ENTRS-232 Port Configuration

LAN IP Configuration

ENTCom1 Configuration

ENTBaud-rate 38400

Term Emul Enable

ENT

to scroll

ENTTerm Emul Enable ChangeTo Disab ?

HOLD Confirm

ENTL0[LAN] MA D0:23:08:8A:D4

ENTL0[LAN] IP 192.168.4.149

ENTView Statistics

ENTLink Operations: 100Mb/s(Full)

Transmit Packets 00099650

Receive Packets: 007F0D70

Collisions: 00000000

Transmit Errors: 00000000

Receive Errors: 00002524

Rcv Miss Packet: 00000000

View & Setup IP Address

IP Addr: 192.168.4.149

ENTInput Addr: _

HOLD

Confirm

ENT


NetMask: 255.255.0.0

Gateway: 192.168.1.253

Enable Disable

View and Edit Config Parms

ENT

V6 Addr: Disable

ENTV6 Addr: _

Baud-rate 38400 ChangeTo 2400 ? ----------------- 2400 4800 9600 19200 38400

PrefixENT

Prefix: _

RouteENT

Route: _

HOLD Confirm




Caching Parameters

ENTWrite-Back Cache Disabled

ENTEnable Write -Back Cache

Enabled Disabled

Period CachFlush Time-Disabled

Set Cache Flush Time-Disabled? ----------------- Disabled ConSync 30 secs 60 secs 120 secs 300 secs 600 secs

to select

HOLD

Confirm

HOLD

Confirm

ENT

Host-side Parameters

(In dual-controller models, all IP Address menus are divided into Slot A and Slot B.)

- 16 -

Configuration Parameter 2/4 – Host-side Parameters

Host-side Parameters

ENTMaximum Queued I/O Count-1024

LUNs per Host SCSI ID-8

Num of Host-LUN Connect-4

Tag per Host-LUN Connect-4

ENT

to select

HOLD Confirm

to select

HOLD ConfirmENT

to select

HOLD ConfirmENT

Set LUNs per Hos SCSI ID-8 ? ----------------- 1 2 4 8 16 32

Set Maximum Queu I/O Count-1024 ? ----------------- Auto 1 (Continues) 1024

to select

HOLD ConfirmENT

Set Num of Host- Connect-4 ? ----------------- 1 (Continues) 1024Set Tag per Host

Connect-4 ? ----------------- 1 (Continues) 256

Peripheral Dev Type Parameters

ENTDevice Type- Enclosure

ENT HOLD Confirm

Device Qualifier Connected

Support Removable Media-Disabled

LUN Application- First Undef LUN

Dev Qualifier? Support Not Conn

HOLD Confirm

Not Connected Connected

ENT

Enable ? Support Removable

HOLD Confirm

Disabled Enable

ENT

Set Device Type? Enclosure -----------------

No Device(0x7f) Direct-access(0)

Sequential(1) Processor(3)

CD-ROM(5) Scanner(6)

MO Device(7) Storage Array(c) Enclosure Dev(d)

Unknown(0x1f)

Applies to ? Undefine LUN-0’s

HOLD Confirm

Undefine LUN-0’s First Undef LUN

ENT

to select

Cyl/Head/Sector Mapping Config

Fibre ConOption- Loop Only

ENTSector Ranges Variable

Head Ranges Variable

Cylinder Ranges Variable

ENTSet/Change Cyl/Head/Sec ?

HOLD

Cyl/Head/Sec Values ----------------- Variable 1 2 (continues) 35 36

HOLD Confirm

to select

ENTSet Fibre ConOpt

Loop Only Ptop Only

Auto

to select

HOLD Confirm

Fibre host models

Drive-Side Parameters

Caching Parameters

- 17 -

Drive-Side Parameters

ENTMotor Spin-Up Disabled

ENTEnable Motor Spin-Up ?

Configuration Parameter 3/4 – Drive-side Parameters

Enabled Disabled

Disk Access Delay-60secs

ENT

to select

Host-Side Parameters

HOLD Confirm

HOLD Confirm

Drv I/O Timeout 30 secs

ENT

to select

HOLD Confirm

Set Disk Delay Time-No Delay? ----------------- No Delay 5 secs 10 secs (continues) 70 secs 75 secs

Maximum Tag Count-4

ENTSet Maximum Tag Count-Disabled ----------------- 1 2 4 8 16 32 64 128

to select

HOLD Confirm

Set SCSI IO Time ----------------- 7 secs ½ sec 1 sec (continues) 30 secs

Auto Rb Drv Swap Autochk-15 secs

ENT

to select

HOLD Confirm

SMART Mode- Disable

ENTSet SMART Mode ----------------- Disable Detect Perpetual Clone Clone+Replace Fail Drive

to select

HOLD Confirm

Set Drv Swap Chk Time-Disable ? ----------------- Disable 5 10 15 30 60

Auto Assign Global-Disabled

ENTEnable AutoAsgn Global Spare ?

Enabled Disabled

HOLD Confirm

Drv Delayed Write-Enabled

ENTDisable Drive Delayed Write ?

Enabled Disabled

HOLD Confirm

NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller operator may not proceed normally.

to scroll

HOLD

Disk Array Parameters

Periodic SAF-TE ChkTime-30secs

ENTSet SAF-TE Check Time-Disable ?

Enabled Disabled

HOLD Confirm

- 18 -

Configuration Parameter 4/4 – Disk Array, Redundant Ctlr, Controller Parameters

Disk Array Parameters

ENTRebuild Priority Normal

Verification on Writes

ENT HOLD

ENT HOLD ConfirmSet Rebuild Pri Normal ? ----------------- Low Normal ? Improved ? High ?

to select

to select

Max Drv Response Timeout-Disabled

Confirm

ENT HOLDSet Max Drv Rsp Timeout-Disable ? ----------------- Disable 160 ms 320 ms 960 ms

to select

Confirm

AV Opt Mode- Disabled

ENT HOLD

to select

Confirm

Logical drive available

Controller Parameters

ENTController Name: Not Set

ENTEnter Ctlr Name: _

HOLD Confirm

LCD Title Disp- Logo

ENT HOLD ConfirmLCD Title DispIn Name ?

Passwd Validation Timeout-Always

ENT HOLD

Ctlr Unique ID (Hex) – 88AD4

ENTCtlr Unique ID (Hex) - _

Set Controller Date and Time

ENTTime Zone

Date and Time

ENTGMT +00:00 GMT _

ENTMMDDhhmmYYYY _

Redundant Ctlr Configuration

ENTRC Communication Channel-SATA

Cache Sync on WtThru-Enabled

Adaptive Write Policy-Disabled

ConfirmENT HOLDDisable Cache Sync on WtThru ?

ConfirmENT HOLD

ConfirmHOLD

ConfirmHOLD

Enabled Disabled

Enable Adaptive Write Policy ?

Enabled Disabled


Name Logo

to select

Confirm




Redundant controller models

HOLD Confirm

Passwd Validation ----------------- Disable 1 min 2 mins 5 mins Always

PasswdValidation ----------------- Disable 1 min 2 mins 5 mins Always

Set AV Opt ? Disabled ----------------- Disabled Fewer Streaming Multiple Streami

- 19 -

Peripheral Device 1/2 - Device Status, Device Entry

View and Edit Peripheral Dev

View Peripheral Devices Status

ENTRedundant Ctlr Failback Complet

ENTDevice Set 0

ENTPower Supply

Cooling Fan

Temperature Sensor

Drv Fail Output Definition

ENTPSU0 Normal

ENTCooling fan0 Low

ENTBackplane Temper 25.0(c) HT: 60.0

Slot 1 CH2 ID0

to select

to select

to select

Device Set Descriptor

ENTIFT DS S12F-G1433

to scroll

ENT

I2C Periph Dev Operational


Voltage Sensor

ENTPSU0 +5V 4.5V

to select

Set Peripheral Devices Entry

ENTForce Primary ctlr Failure ?

Force Secondary Ctlr Failure ?

ENTRedundant Ctlr Primary Failback

HOLD Confirm

HOLD Confirm

Event Trigger Operations

ENT

CBS Low/Failed Disabled

ENTCBS Low/Failed Enabled?

Power Supply Failed Disabled

ENTPower Supply Failed- Enabled?

Fan Failed- Disabled

ENTFan Failed Enabled?

Temp Over Limit- Disabled

ENT HOLD Confirm


Enabled Disabled

Enabled Disabled

Enabled Disabled

Temp Over Limit ----------------- Disabled Enabled Down in 2 min (Continues) Down in 1 hour

to select

Ctlr Failure- Disabled

ENTCtlr Failure Enabled ?

Enabled Disabled

ENT

Adjust LCD Contrast

- 20 -

Peripheral Device 2/2 – LCD Contrast, Device Configurations

Set Peripheral Devices Entry

Adjust LCD Contrast

Ctlr Peripheral Device Config

ENTLCD Contrast: □□□□□□_______

ENTView Ctlr Periph Device Status

Temperature and Voltage Parms

ENTVoltage Monitor

ENT

ENTTemperature Monitor

ENT Trigger Threshold for ----------------- 3.3V Event 5V Event 12V Event CPU Temp Event Ctlr Temp Event

ENTUpper for 3.3V Event-Def (3.3V)

Lower for 3.3V Event-Def (2.9V)

[+3.3V] 3.384V Operation Normal

[CPU] 45.0°C In Safe Range

to adjust

to select

ENTRange 3.4V-3.9V Input:_

Upper CPU Temp Event-Def (90°C)

Lower CPU Temp Event-5°C

Voltage

Temperature

ENT


ENTRange 2.6V-3.2V Input:_


ENT


ENT Range 0°C- 20°C Input:_


Range 50°C- 100°C Input:_

HOLD Confirm

HOLD Confirm

HOLD Confirm

HOLD Confirm

to select

to select

- 21 -

System Functions

Mute BeeperENT

Change Password

Reset This Controller

Shutdown This Controller

Controller Maintenance

ENTMute Beeper

?

Old Password: _

ENT HOLDNews Password: _

Re-Ent Password: _

HOLDChange Password Successful !

HOLD

Reset This Controller ?

ENT HOLD

Shutdown This Controller ?

ENT HOLDShutdownControll Is Busy !

Shutdown Complet Reset Ctlr ?

HOLD

Export NVRAM to reserved space

ENT

Impor NVRAM from reserved space

View Update FirmwareStatus

Export NVRAM to reserved space ?

HOLD HOLDExport NVRAM is progress !

Export NVRAM is completed !

ENT HOLDImport NVRAM Is Progress !

NOTICE: Change made to this setting will NOT take effect until the controller is RESET. Prior to resetting the controller operator may not proceed normally.

Firmware is not Updating

ENT

System Function

Import NVRAM ----------------- include passwd ? except password ?

HOLD Confirm

to select, ENT to enter to select, ENT to enter to select, ENT to enter

Confirm

Confirm

to scroll to scroll

Update status

HOLD



- 22 -

View and Edit Event Logs

33:NOTICE:NVRAM Restore From

ENTClear Below Event Log ?

ENT HOLD

View System Information

Total Cache Size 1024MB

ENT

Firmware Version: 3.85A.02

Boot record Version: 1.15A

Serial Number: 7927165

CBM: Present

Base Board Rev. ID: 0

Base Board ID: 9C

ID of NVRAM V1.13.154

Ctlr Position Slot A

System Information / Event Logs

Confirm

2010/01/01 00:37 Notification

HOLD

to scroll

to select

Clear Below Event Log

HOLD ENT

SN-Slot A: 7758538

SN-Slot B: 7758536

Single controller model

Redundant controller model

Redundant controller model

esds lcd navigation map v2.1

Documents