eschlböck biber · chipper type disc chipper max. wood diameter 21 cm 21 cm 21 cm infeed width 24...
TRANSCRIPT
Eschlböck BIBERWood chipper
ESCHLBÖCKMaschinenfabrik GmbHA-4731 PrambachkirchenTel. 0043-7277-2303-0 Fax [email protected]
All
info
rmatio
n w
ithout oblig
atio
n, m
odifi
catio
ns
poss
ible
. T
he p
ictu
red m
ach
ines
can h
ave
speci
al e
quip
ment, w
hic
h is
not in
cluded in
deliv
ery
. V
05/2
017 -
Englis
h
Competence in Machine design
For generations, Eschlböck took their pride in developing innovative agricultural and horticultural machines. In 1956, Rudolf Eschlböck, a young farmer from Eschlbach, in the Prambachkirchen municipality, established a company to develop and produce machines for agricultural requirements.
2
His self-loading trailer with a moving floor for unloading turned out to be the most successful letters patent of Rudolf Eschlböck, the founder and today's senior partner of the Eschlböck company that first produced wood chippers in 1978.
A company leadership with a strong sense of responsibility for all the workers whose efficiency and capability formed this family enterpr ise into the most innovat ive manufacturer in the woodchipping industry is considered a heritage from the Eschlböck family.
Europe's widest range of woodcutting devices Biber is Eschlböck's brand name for a complete assortment of woodchippers for agricultural demand, extending to devices in industrial machinery. Eschlböck produces manually-fed disk-style and drum-style chippers for twigs and branches of 12 cm in diameter as well as large-scale chippers for up to 75 cm trunks, and they are the only producer in Europe to do so.
Biber – an success account
In 1984, the Eschlböck family enterprise developed the Biber 5 disk wheel chipper. This multi-purpose device can be applied for producing as rough wood chips up to 12cm as precise smaller wood chips. The Biber 5 KL enabled lots of agricultural and horticultural communities in Bavaria and Austria an evolving change from traditionally shoveled wood log feeding to small wood chips suitable for automatically feeded heating devices. Since then, more than 1600 Biber 5 have been sold to customers.
In 1992, Eschlböck came out with Biber 7, the robust drum woodchipper with an 35 x 56 cm feeding aperture. Eschlböck's chipping drum with its shifted pairs of cutting knives became standard in woodchipping technology.
The Biber 8 (from 2001 referred to as Biber 80), Eschlböck's first large wood chipper, was first produced and sold in 1995.
In 2008, Eschlböck set a new standard in woodchipping technology by introducing the new multi-purpose cutting rotor producing as coarse as fine cuttings. The new models are suitable for producing fine chips of precise dimensions that for several decades Biber devices are renowned for - as well as coarse chips for industrial devices.
Biber 3 Z
4
Biber 2 with diesel engine
The new Biber 2 V is a chipper for professionals, equipped with a powerful Kohler diesel engine with / 38 HP and a torque of 133 Nm. The compact trailermounted machine meets perfectly the needs of municipalities and landscape gardeners.
Biber 2 PTO-driven
Biber 2Z driven by PTO is available with 3-point hitch or optional axle.
Quality, proven for decades
The powerful autonom infeed system of Biber 2V and Biber 2Z as well as the high flywheel mass of the 75 cm chipping disc with 3 knifes is built for continous use in all kinds of wood, up to the maximum log diameter. This makes the Biber 2 to an outstanding machine in its class.
A new, ergonomic infeed hopper reduces the possibility to hit the head when feeding the machine, enhances work safety and makes professional operation much more comfortable.
28 kW
The ambidextrous control elements enable to operate the machine from both sides. The new control panel and software maximize capacity, comfort and working safety.
There are two options available: Emergency Stop Button combined with safety bars on 3 sides of the infeed hopper or with pressure-activatet safety cable surounding the infeed.
Upgraded safety features meet the latest Health and Safety regulations in whole Europe without influence on practicable and troublefree operation!
Comfort and further benefits
The fully adjustable and turnable ejection tube is easy to handle and can be folded for transport.
All the service- and maintenance points of the machine and the optional engine are easily accessible, as well as the lubrication points, grouped together at key points.
A thoughtful and robust design in combination with reliable technologies and high quality components will result in long machine life and reduced down times.
For continous use up to the maximum wood diameter
Specifications Biber 2Z Biber 2Z Biber 2V(Three point hitch) (Travelling axis) (Engine)
Chipper type Disc chipper
max. wood diameter
Infeed width 21 cm 21 cm 21 cm
Nr. of knifes 3 pieces 3 pieces 3 pieces
Cutting depth 0.5 - 1.5 cm 0.5 - 1.5 cm 0.5 - 1.5 cm
Electronic infeed control
incl. operating hour meter ● ● ●
capacity hydraulic tank 35 litre 35 litre 35 litre
Power source PTO PTO Diesel engine
PTO power required 15 to 40 kW 15 to 40 kW -(20 to 55 HP) (20 to 55 HP)
PTO speed 540 to 1000 rpm 540 to 1000 rpm -
Dimensions l x w x h (m) *
Working position 2.40 x 1.76 x 2.55 3.50 x 1.76 x 2.65 4.30 x 1.76 x 2.70
Transport position 2.40 x 1.30 x 1.98 3.50 x 1.60 x 2.08 4.30 x 1.54 x 2.10
Weight app.* 680 kg 800 kg 1,250 kg
* Depending on options l Standard machine � additional options charged extra
.
.
.
.
.
.
.
.
.
.
.
.
.
Disc chipper Disc chipper
15 15
28 kW (38 HP)
15
Biber 2V and Biber 2Z
4
New Eschlböck Biber 2! – Professional chipper for horticulture
Ø 15 cm
The new BIBER 3-21 - innovative chipping technology
Biber 3 Z
Specifications Three point hitch Travelling axis Engine
Chipper type Disc chipper
max. wood diameter 21 cm 21 cm 21 cm
Infeed width 24 cm 24 cm 24 cm
Nr. of knifes 3 pieces 3 pieces 3 pieces
Cutting depth 1-3 cm 1-3 cm 1-3 cm
Cutting grate for
uniform chipsize ● ● ●
Capacity hydraulic tank 35 litre 35 litre 35 litre
PTO power required 30-80 kW (40-110 HP) 30-80 kW (40-110 HP) -
PTO speed 540 - 1000 rpm 540 - 1000 rpm -
Engine - Hatz-Silent Diesel - - 36 or 45 kW(49 or 62 HP)
Knife sharpening device ● ● ●
Blower tube extension ○ ○ ○
Dimensions l x w x h (m) *
Transport position 2,61 x 1,55 x 2,43 3,75 x 1,92 x 2,45 4,43 x 2,20 x 2,65
Working position 2,61 x 1,55 x 3,22 3,75 x 1,92 x 3,25 4,43 x 2,20 x 3,40
Weight app.* 1,100 kg 1,270 kg 2,400 kg
* Depending on options l Standard machine � additional options charged extra
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Disc chipper Disc chipper
Perfect wood chips
A new, innovative chipping Disc in combination with a removeable cutting grate (made of knife-steel) produces exact wood chips.
Reliable and practical
A new, ergonomic infeed hopper reduces the possibility to hit the head when feeding the machine, enhances work safety and makes operation much more comfortable.
The ambidextrous control elements enable to operate the machine from both sides. The new control panel and software maximize capacity, comfort and working safety.
Health and Safety
Upgraded safety features meet the latest Health and Safety regulations in whole Europe without influence on practicable and troublefree operation!
There are two options available: Emergency Stop Button combined with safety bars on 3 sides of the infeed hopper or with pressure-activatet safety cable surounding the infeed.
Comfort and further benefits
The fully adjustable and turnable ejection tube is easy to handle and can be folded for transport.
Easy access to service and maintenance points.
Another USP of the Biber 3-21 is the built in grinding wheel, which enables easy and uncomplilcated resharpening of the knifes.
Ø 21 cm
The new Biber 3-21 also provides more capacity. Instead of 18 cm maximum wood diameter, the new version is capable of processing logs and branches up to 21 cm diameter.
A thoughtful and robust design in combina t ion w i th re l iab le technologies and high quality components will result in long machine life.
6
The perfect machine for landscape preservation and woodchip production!
8
Ø 32 cm
The series Biber 6 - machines for professionals
Considerable advantages
The Biber 6 is the first step for entering the world of drum chippers This machine combines many advantages of a heavy-duty chipper, but shows compact dimensions. With the Biber 6 you gain the best results by powering it by a tractor with a power range of 75 to 110 HP
Modern engineering provides an accurate quality of wood chips
The heart of the machine is a newly developed knife wheel, which runs extremely smooth Moreover, it is equipped with 4 shifted quick-change blades for a higher ease of maintenance. The new technology is the basis for coarse wood chips with a minimum content of dust. This is the proverbial Biber-quality of wood chips
.
.
.
.
Strong feeding belt, simple feeding. The ideal supporter
49 cm is the amplitude of the feeding area, which is able to handle wood with a diameter of 32 cm Due to a tough and automatically operating feeding belt, feeding of the Biber 6 is easy to do. A lot of work in the forest, in market gardening or landscape construction is highly efficient with the Biber 6
An easy handling leads to a pleasant labor while producing wood chips
Different screens for different chip sizes of wood chips. Quick changeover of the different screen sizes: pull screen, insert desired size, finished!
Another reason for the productivity of the Biber 6 is the huge blower with a diameter of 1 meter, this leads also to a great throwing range of the machine.
.
.
certified by the German GS (Guaranteed Safety) quality mark.
Specifications
Chipping system drum chipper
Feed chute 32 x 49 cm
Chain belt in-feed 50 cm
Blades 4 pieces
Exchangeable screens for chipping lengths of 2, 3, 4 or 5 cm
Electronic feed control incl. loperating hours counter
Power required PTO shaft from 44 to 100 kW(59 to 136 HP)
Rotat. speed of PTO shaft 540 rpm
Travelling axis 10 (25) km/h l
Dimensions l x b x h (m) * working position
Travelling axis 3,80 x 3,00 x 3,50
4,60 x 3,20 x 3,80
Weight ca.*
* Depending on the fittings
l Standard
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Three point hitch �
Engine 46,1 kW Hatz Silent diesel
Three point hitch 2,80 x 2,85 x 3,50
Engine
Travelling axis from 2,500 kg
Three point hitch from 2,500 kg
Engine from 3,500 kg
� Optional extra available at extra cost
�
10
Sophisticated technology - high-performance and smooth running
The high centrifugal mass of the Eschlböck chipping drum, with its 8 knives offset in pairs, guarantees smooth running and a relatively low power requirement.
Robust und exact
.
The open and robust design of the chipping rotor with patented anti-foreign body shear pin safety device is unchallenged for brushwood as well as for green waste when exact and uniform wood chips are desired
Convenient loading
The chain belt in-feed makes it easy to load anything from whole trees to short logs and bark. The new and conveniently large feed hopper is fitted with state-of-the-art safety devices.
Biber 7 plus - safety devices for loading by hand or crane
Without having to dismantle anything, the manual gearshift is protected simply by putting the crane, all functions can be conveniently controlled by wired remote control from the towing vehicle. Biber 7 plus offers the convenience of the big machines.
Ø 37 cm
The Biber 7 and Biber 7 plus series
Specifications Biber 7 Biber 7 plus
Feed chute 37 x 56 cm
Chain belt in-feed 0.8 m
No. of knives 8 pieces
V-belt transmission SPB SPC
Power requirementvia PTO shaft (59 to 136 HP) (59 to 170 HP)
Rotational speed of PTO shaft 1000 rpm
Travelling axis 10 (25) km/h l l
Travelling axis 80 km/h, compressed air braking - �
Reinforced hydraulic drive � l
Wired remote control - l
Loading crane - �
Working position l x b x h (m)* 3.75 x 2.93 x 3.50 5.00 x 3.35 x 4.00
Weight ca. * from 3,150 kg from 5,000 kg
* Depending on the fittings
l Standard model � Optional extra available at extra cost
.
.
.
.
.
.
.
.
.
.
.
.
.
from 44 to 100 kW from 44 to 125 kW
12
The new model combines all innovations in the chipper production.
Biber 78 is the newest model of the new chipper generation. Equipped with the newest chipping technology, it produces perfect fine wood chips, but also coarse chips.
In the medium size segment, it exceeds all expectations concerning power and quality of wood chips. It is also ideal for eliminating scattered woodpiles in an effective and economic way.
The infeed system works aggressively when processing brushwood as well as round timber up to 60 cm in diameter.
Q
.
.
uality in detail
The new chipping rotor for fine and coarse wood chips is equipped with 12 fast-adjustable blades, mounted as half or full set.
The safeguard system for blade fixing reduces damages to the mechanism caused by foreign objects
The 1.3 m² large, fully exchangeable screen and the 1.55 m in diameter large blower with reliable wear elements realize a smooth processing of the material and uniform wood chips
The Biber 78 series - the newest chipper generation
Specifications Biber 78 Z / ZK
Maximum wood diameter 60 cm
Max. woodØ with blade system (hard wood) 45 cm
In-feed width 84 cm
Chipping system drum chipper
Quick-change blades (piece) 6 or 12
Feeding
Length of feeding belt 2.1 m
Clearing system l
Loading crane - / l
Drive
Power requirement via PTO shaft from 110 kW
Rotational speed of PTO shaft 1000 rpm
Tyres
Standard tyres 445/65 R 22.5
Wide tyres 600/50 R 22.5
Central lubrication system �
Spaltbiber �
Dimensions, ca.*
Length (m) 6.00
Width (m) 2.55
Height (m) 3.90
Weight*
Basic model without crane, ca. 10,000 kg
Basic model with crane, ca. 12,500 kg
* Depending on the fittings l Standard model � Optional extra available at extra cost
.
.
.
.
.
.
.
.
.
.
.
.
.
.
The Biber 83 series - perfect fine and coarse chipping
14
1) 2)
3)
With a feeding roller 75 cm in size!
The optimised feeding system and a large and aggressive feeding roller allow convenient introduction of material within easy reach of the chipping knives.
Increased flow capacity, higher quality of wood chips
Its split and large screen element accelerates the material drainage after the chipping process, also increasing the flow capacity of wood chips. The minor friction also reduces the content of small particles leading to a higher quality of wood chips.
Gentle ejection
The large, low-wear blowers with a diameter of 1.55 m allow gentle ejection of wood chips to a wide range.
Accurate stream of chips
Ejection at a level of 5.2 m is ideal for feeding high-levelled trailers and containers. It is hydraulically adjustable in level from 2.6 to 5.2 m. By using the optional flap above the stream, the chip spout can be diverted upwards or downwards to use the space of the applied storage area to full capacity. Fine or coarse chipping
The well-proven multi-purpose chipping rotor is smooth-running and energy-saving by construction. The robust chipping knives or the optional blade system produce as well precise and fine as coarse chips for industrial furnaces – depending on applied knives or screen size. If you consider retooling, you can switch also belatedly between robust chipping knives and the fast-adjustable blade system.
Specifications 83 Z / ZK 83 RBZ 83 RBM 83 S
Maximum wood diameter 60 cm 60 cm 60 cm 60 cm
Max. woodØ with blade system (hard wood) 45 cm 45 cm 45 cm 45 cm
in-feed width 98 cm 98 cm 98 cm 98 cm
Chipping system drum chipper with combined chipping drum
No. of knives or blade system 8 or 16 8 or 16 8 or 16 8 or 16
Feeding
Feeding belt length 2.05 m 2.05 m 1.7 / 2.4 / 3.1 m 3.1 m
Loading crane - / l l l -
Drive
Power requirement via PTO shaft from 150 kW - - -
Rotational speed of PTO shaft 1000 rpm - - -
Power requirement from engine - truck 353 kW from 331 kW from 331 kW
Mounting
on tandem axle l - - l
on truck - l l -
Turntable - l �
Hydraulic swinging drawbar - - - l
Central lubrication � � � �
Spaltbiber � � � �
Transport dimensions, ca.*
Length (m) 5.90 8.30 9.60
Width (m) 2.55 2.55 2.55 2.55
Height (m) 4.00 4.00 4.00 3.70
Weight ca. (kg) * 12,500 / 16,000 24,000 17,000
* Depending on the fittings l Standard model � Optional extra available at extra cost
1) All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed of top of the costumers vehicle
2) Standard solution S or SD/SDK variant (with turntable and optional crane)
3) Depending on the variant chosen
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
The Biber 84 series - with an even higher throughput
16
2)1)
Wide material feeding
With its feeding width of 122 cm, the 84' series is ideal for bush chipping or forest residue as well as for round timber up to 60 cm in diameter. The broad chipping rotor with its 10 respectively 20 chipping knives or optional blades allows an even higher throughput.
Adjustable chipping rotor
The well-proven Eschlböck chipping rotor is smooth-running and especially energy-saving in construction. The robust chipping knives or the optional blade system produce as well precise fine as coarse chips for industrial furnaces – depending on applied knives or screen size. Only Eschlböck devices leave you with the option of belated switching between robust chipping knives and the fast-adjustable blade system, each with a protection against damages caused by foreign objects.
Large exchangeable screen element
The large, split and exchangeable screen element within the Eschlböck Biber wood chippers allows producing precise wood chips.
Large low-wear blowers
Blowers of 1.55 m in diameter, lined by reliable wear elements, lead to a gentle spouting and coarse chipping with only minor contents of small particles.
Accurate stream of chips
The hydraulically adjustable ejection can be telescoped (option). In addition, by using the optional flap above the stream, the chip spout can be diverted upwards or downwards.
Specifications 84 Z / ZK 84 RBZ 84 RBM 84 S
Maximum wood diameter 60 cm 60 cm 60 cm 60 cm
Max. woodØ with blade system (hard wood) 45 cm 45 cm 45 cm 45 cm
In-feed width 122 cm 122 cm 122 cm 122 cm
No. of knives or blade system 10 or 20 10 or 20 10 or 20 10 or 20
Chain belt in-feed length to roller 2.05 m 2.05 m 1.7 / 2.4 / 3.1 m 3.1 m
Loading crane - / l l l -
Drive
Power requirement via PTO shaft from 150 kW - - -
Rotational speed of PTO shaft 1000 rpm - - -
Power requirement from engine - truck 368 kW from 346 kW from 346 kW
Mounting
on tandem axle l - - l
on truck - l l -
Turntable - - l �
Hydraulic swinging drawbar - - - l
Central lubrication � � � �
Spaltbiber � � � �
Transport dimensions, ca.*
3)Length (m) 5.90 8.30 9.60
Width (m) 2.55 2.55 2.55 2.55
Height (m) 4.00 4.00 4.00 3.70
Weight ca. (kg) * 14,000 / 17,000 26,000 19,000
* Depending on the fittings l Standard model � Optional extra available at extra cost
1) All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed of top of the customers vehicle
2) Standard solution S or SD/SDK variant (with turntable and optional crane)
3) depending on the variant chosen
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
Chipping system drum chipper with combined chipping drum
Feeding
Engine - MAN Scania/Volvo Scania/Volvo .
2)1)
3)
The series Biber 85 - maximize your daily output
18
Maximal infeed width
The effective cutting width of 147 cm is a great peak value in this class! Thanks to the large infeed width, each crane loading is brought to the cutting knives in an effective way. This comfort for the operator results in an increase of the throughput per hour and per day. Especially when processing a huge amount of material, the new Biber 85 shows its advantages.
Adjustable chipping rotor
The well-proven Eschlböck chipping rotor consists of low-wear material, is easy in maintenance and service reduced. You can switch – even belatedly – between robust chipping knives and the fast-adjustable blade system, working with a half or full set of knives or blades.
Large screen element
The 2.2 m² large screen with four exchangeable elements allows producing precise fine and coarse wood chips.
Large low-wear blower
Blowers of 1.55 m in diameter, lined by reliable wear elements, lead to a gentle spouting and precise fine chips as well as coarse chips with only minor contents of small particles.
Specifications 85 Z / ZK 85 RBZ
Max. wood diameter 60 cm 60 cm
Max. woodØ with blade system (hard wood) 45 cm 45 cm
In-feed width 147 cm 147 cm
Chipping system drum chipper with combined chipping drum
No. of knives or blade system 12 or 24 12 or 24
Feeding
Chain belt in-feed length to roller 2.05 m 2.05 m
Loading crane - / l l
Drive
Power requirement via PTO shaft from 150 kW -
Rotational speed of PTO shaft 1000 rpm -
Power requirement from engine - 353 kW
Mounting
on tandem axle l -
on truck - l
Tyres
Standard tyres 445/65 R 22.5 front : 385/65 R 22.5rear : 315/80 R 22.5
Wide tyres 600/65 R 22.5 -
Central lubrication � �
Spaltbiber � �
Transport dimensions, ca.*
Length (m) 5.90 8.30
Width (m) 2.55 2.55
Height (m) 4.00 4.00
Weight*
Basic model without crane, ca. (kg) 14,500 -
Complete model with crane, ca. (kg) 18,000 26,000
* Depending on the fittings l Standard model � Optional extra available at extra cost
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
The Biber 92 series - unchallenged efficiency!
20
High performance wood chippers!
The Biber 92 model is characterised by its conv inc ing e f f i c iency and per fec t performance. It is ideal for processing timber up to 75 cm in diameter. Its feeder, with a width of 122 cm, can handle even unwieldy material and efficiently process it.
The operator can choose between 2 chipping rotors from Eschlböck. Both consist of high-strength and low-wear materials and are distinguished by intelligent patented screw links. They are especially persistent, easy in maintenance and service reduced.
The multi-purpose chipping rotor:
Perfect fine and coarse wood chips.
Robust construction with 20 chipping k n i v e s – i d e a l f o r h a r d w o o d , iced wood and rough operations.
Change over to blades: anytime and even more quickly.
The ideal rotor for optimal wood chips
�
�
��
���
�
�Half knife / blade set reduces power requirement and saves fuel.
The new T-rotor:
�Further development of Eschlböck's rotor technology.
For industrial purpose with high performance.
�Top results concerning uniformity and coarseness of wood chips!
TOP model with conveyor belt
Speed, height and direction of the conveyor belt can be varied during operation. The double adjustment option of the tilt angle improves the loading efficiency.
Having an 8 m long and 135 degrees pivotable belt, the Biber 92 ZK top and the Biber 92 RBZ top operate very flexible. They are unbeatable in producing coarse wood chips with little fines.
�
��
���
�
Specifications 92 Z / ZK Truck 92 RBM 92 S/DK
Maximum wood diameter 75 cm 75 cm 75 cm 75 cm
Max. woodØ with blade system (hard wood) 60 cm 60 cm 60 cm 60 cm
In-feed width 122 cm 122 cm 122 cm 122 cm
Chipping system drum chipper combined chipping drum, optional T-rotor
No. of knives or blade system 10 or 20 10 or 20 10 or 20 10 or 20
Chain belt in-feed length to roller 2.05 m 2.05 m 1.7 / 2.4 / 3.1 m 3.1 / 2.4m
Loading crane - /l l l - /l
Drive
Power requirement via PTO shaft from 204 HP/ 150 kW - - -
Rotational speed of PTO shaft 1000 rpm - - -
Power requirement from engine - - from 404 kW from 404 kW
RBZ MAN power take-off - 500 HP / 368 kW - -
Vican Volvo driving engine - 750 HP / 551 kW - -
Turox Mercedes driving engine - 630 HP / 460 kW - -
Mounting
on tandem axle l - - l
on truck - l l -
Turntable - - l - /l
Hydraulic swinging drawbar - - - l/ -
Central lubrication � �/l � �
Spaltbiber � �/ - - -
Ejection
Blower l l l l
�/� � - -
Top Conveyor belt - /� � - -
Transport dimensions, ca.*
l x w x h (m) 5.9 x 2.5 x 4.0 x 2.5 x 4.0 x2.5x4.0 9.9x2.5x3.7/4.0
Weight ca. (kg) * 14,500 / 18,000
* Depending on the fittings l Standard model � Optional extra available at extra cost
1) All-in-one device RBM or RM variant: wood chipper mounted on a frame to be installed of top of the costumers vehicle
2) Depending on the variant chosen
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
No. of knives in case of T-rotor (option) 5 pieces 5 pieces 5 pieces 5 pieces
Vario Blower
.
1)
2)
2)
2)
2)
“VARIO”- the hydraulic blower:Continous speed setting - independent of the chippingdrum.Optimized flow of wood chips, less wear and higher quality of wood chips. Easy in maintenance with robust construction.
�
�
�
��
��
�
2) 2) 2)
2)
2)
Biber 3 Z
22
The new series BIBER POWERTRUCK consist of two trucks, specially designed by Eschlböck for chipping operation with a unique new construction for power transmission!
Performance strength, efficiency and convenienceduring chipping operation, off-road and on the motorway!
– the off-road favourite
�Compact – efficient – effective
Speed on the street combined
with highest cross-country
mobility
�Driving comfort and safety
systems make the driver's job
easier
630 HP with direct power
transmission without any energy
loss
No compromise off-road: 8x8 all
wheel drive and rear steered
axle, large wheel diameters,
short overhang, powerful design
�Powerful total package
�
�
�
�
�
��
�
��
�
�
��
�
–
�
�750 HP for chipping and for
driving
�Driving pleasure and economic
efficiency, highest driving
comfort, excellent road holding
Spontaneous power delivery on
the road and uncompromising
power during chipping operation
Cross-country mobility (8x4) with
steered and liftable rear axle and
optional x-track
�Configuration possibilities for the
ideal machine
outstanding performance
Fast – strong – unchallenged
��
�
��
�
��
�
��
�
�
�
Unchallenged concept:
�
power transmission directly to the chipping
aggregate and leads to less wear and saves
fuel.
�The compact construction with 3.7 m short
wheelbase and steered forth rear axle
enables a tight turning circle.
�The operator can drive the vehicle on the
operator's seat without
disengaging the clutch
of the chipping rotor.
�Perfect convenience is due to
the all-wheel system with automatic gearbox
Low center of gravity for a stable and safe
work in the field
�The Epsilon crane can reach over the
driver's cabin.
Advanced ergonomics in the driver’s cab:
for driving mode and for chipping mode.
�The easy-to-clean cooling system of
Eschlböck works efficiently in dusty and hot
settings and guarantees the operational
readiness even in case of extreme working
conditions.
The single-stage BPT gearbox allows full
�
�
��
�
��
�
�
��
��
��
��
��
�
�
�
�
�
.
�
Specifications TUROX VICAN
Maximum wood diameter 75 cm 75
In-feed width 122 cm 122 cm
Chipping rotor ø 100 cm 100 cm
No. of knives (multi-purpose chipping rotor) 10 or 20 pieces 10 or 20 pieces .
No. of knives (T-rotor) 5 pieces 5 pieces
Engine Mercedes 630 HP/460 kW Volvo 750 HP/551 kW
Cylinder capacity 15.5 litre 16 litre
Drive 8x8 8x4 (� X-track)*
Automatic power transmission Autom. torque converter transmission autom. conventional transmission (I-shift)
Rear axle: steered / liftable l/ - l/l
Wheelbase 3.7 m 3.7 m
Tires 14.00 R20 & 12.00 R24 385/65 R22.5 & 315/80 R22.5
Dimensions (transport)* l x w x h 910 x 255 x 400 cm 870 x 255 x 400 cm
Weight* 32,000 kg 32,000 kg
l Standard model � Optional extra available at extra cost * Depending on the fittings
.
.
.
.
.
.
.
.
.
.
.
.
.
.
cm
powered by Eschlböck
Eschlböck Truck Solutions – for the successful operation
Eschlböck's trucks in pole positionIntelligent all-wheel drive systems assist off-road
Various axle configurations and large wheel diameters
�6x6 or 8x8 on MAN
�8x4 with optional x-track and liftable
rear axle on Volvo
�8x8 w i th Mercedes pa r t s and
large cross-country tires
King of the road
�80 km/h and the Biber Powertrucks with
automatic gearbox
�Optimal road holding thanks to low center
of gravity
Worldwide service network for trucks:
�MAN, Volvo, Mercedes
�
��
�
��
�
Quality, performance and convenience
are crucial factors for chipping
operations
�Convenient operation out of the
control center with air-condition,
BPT with park heating, picture
this chipper!
�Relaxed and efficient working thanks to
best control and individual settings.
�The crane of a Biber truck can
r e a c h o v e r t h e c a b i n w h i c h
allows continuous feeding even in
case of constricted room.
�Eschlböck's powerful cool system instead
of the serial cooler is standard
in every type series and enhances
t he pe r fo rmance o f t he t r uck
even in case of extreme temperatures
and dusty environment.
�
�
�
�
��
��
�
�
��
�
�
�
�
�
window, short set-up times and
immediate readiness; it is fun to work with Truck Overview
Specifications TUROX VICAN RBZ RBM
Chipper: Biber model 92 92
Eschlböck's cooler system l l l �
Axle configuration 8x8 8x4 (� X-track)* 6x6, 8x8 8x4, 8x6, 8x8
Engine Mercedes Volvo MAN Scania/Volvo
Power requirement 630 HP/460 kW 750 HP/551 kW from from
Automatic power transmission l l - - / �
Max. driving speed 80 km/h 80 km/h 80 km/h 80 km/h
Cylinder capacity 15.5 litre 16 litre 12.4 litre
Rear axle: steered l l - �
Rear axle: liftable - l - �
Wheelbase 3.7 m 3.7 m 3.6 m
Central lubrication system l l � �
Spaltbiber - � � -
VARIO hydr. blower - � � (Biber ) -
TOP conveyor belt - � � -
Weight ca. (kg) * 32,000 kg 32,000 kg 26,000 kg from 32,000 kg
l Standard model � Optional extra available at extra cost * Depending on the fittings
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
83, 84, 85, 92 83, 84, 92
368 kW 346 kW
12-16 litre
*
84, 92
24
Version ZK -
.
driven by the PTO of a tractor
The compact ZK type is ideal for operating in fields and meadows, drawing its energy from a PTO shaft. The machine is only 2.55 m wide, even when equipped with class 600 tires
Version RBZ - driven by the MAN truck engine
.
The power source of this chipper is the truck engine. Biber trucks can be moved quickly even on long distances on motorways. In addition, its all-wheel drive gives customers the option of operating the machine on unfortified forestry roads as well as in the open country
Version S bzw. DK - mit Aufbaumotor auf Achse
Equipped with an own engine, a tandem axle and a swinging drawbar (version S), optional with turntable and crane (version SDK), the chipper can be turned to the left or right, so timber stored at both sides of the forestry roads can be processed.
Version RBM -
.
driven by an additional engine mounted on the truck
The all-in-one device RBM is based on an all-wheel driven four-axle truck and equipped with a high-capacity engine unit. The RM variant is mounted on a frame to be installed on top of a customer's vehicle. The long infeed belt can be turned 90° to the left or right, which is especially suitable for chipping long timer, when space is limited
26
Biber Powertruck
T h e n e w p r o d u c t l i n e B I B E R POWERTRUCK are two especially designed trucks for wood chipping. The VICAN convinces with a maximum in power output in operation, the TUROX with a great off-road performance.
Quality and individuality for Biber operators
Individual build-up for your mission The series for professionalsBiber 78 - the Junior
.
Equipped with the newest chipping technology, the Biber 78 exceeds all expectations in the medium size segment concerning power and quality of wood chips. It is also ideal for eliminating scattered woodpiles in an effective and economic way
Biber 83 - the Compact
.
Having an 60 x 98 cm infeed opening and a large aggressive feeding roller, the Biber 83 is ideal for special fields of application, which demand compactness and mobility
Biber 84 - the Classic
.
With its feeding width of 122 cm, the '84' series is ideal for bush chipping or forest residue as well as for round timber up to 60 cm in diameter. The broad chipping rotor allows an even higher thoughput
Biber 85 - the Extralarge
.
The effective cutting width of 147 cm is a great peak value. Thanks to the large infeed width, each crane loading is brought to the cutting knives in an effective way, which increases the daily thoughput significantly. Even bulky brushwood is proceeded in a fast way
Biber 92 - the Giant
.
Characterized by its powerful performance and 75 cm infeed height, the Biber 92 is ideal for chipping thick timber and processing a huge amount of material
Specifications Biber 78 Biber 83 Biber 84 Biber 85 Biber 92
max. wood diameter 60 cm 60 cm 75
max. woodØ with blade system (hard wood) 45 cm 45 cm 45 cm 60 cm
In-feed width / cutting width 98 cm 122 cm 147 cm 122 cm
.
.
.
..
60 cm
45 cm
84 cm
60 cm cm
28
Once you have seen the Spaltbiber in action, as a wood chipper you can always be secure in the knowledge that there will never be any logs left over.
The Spaltbiber works on an entirely new principle. It splits sideways.
That means it can split any diameter of tree trunk easily and safely that the loading crane is able to fit in the splitter's tray.
The loading crane can also be used to lift up the top, split section and so helps further in the splitting process.
No tree trunk is too thick!
Combining a Spaltbiber with your chipper makes wood chip production considerably more efficient: oversized logs can be split and wood continuously supplied to the chipper's feed chute to be made into chips, in a single process.
Logs more than a metre in diameter are simply placed back in the semi-circular tray for splitting again. With the Spaltbiber, there'll be no logs left over.
Being mounted on a chipper, tractor or truck, the Spaltbiber can be used in a flexible way.
Eschlböck Spaltbiber - innovative log splitter
Specifications Spaltbiber 1100
Diameter of tray 1,1 m
Splitting force at 180 bar 22 tonnes
Weight ca. 1.300 kg
Dimensions l x w x h (m) 3660 x 375 x 940
Working position
Transport position 2300 x 630 x 940
Specifications Spaltbiber 900
Diameter of tray 0,9 m
Splitting force at 180 bar 22 tonnes
Weight ca. 900 kg
Dimensions l x w x h (m)
.
.
2550 x 285 x 1100
Service and customer support
As a traditional family enterprise, we attach great importance to continuous advancement, but also to tradition, continuity and reliability. The wide assortment of technical devices, produced with the latest manufacturing methods, is continuously being optimized. A laser cutting device and a 320t bending machine, based on a six-axle chassis, fulfill nearly every requirement at a plant renowned for its precise and rapid production processes. The application of up-to-date and high-technology materials to wood chippers with continuously increased effectivity and capacity guarantee convenient operation, long endurance and high resale value.
Good customer service and being able to supply spare parts rapidly and reliably are particularly important to us.
30
Apprenticeship at Eschlböck's and partners in schooling
Year after year, a large number of apprentices at Eschlböck get a qualified training and are finally certified as skillful mechanical engineers, mechatronic engineers or industrial business management assistants. To inspire young people and to interest them for a technical profession is a highly important value to the company. For this reason, Eschlböck continuously supports schools and invites young people to visit the company plants.
Visit our head office and plants at Prambachkirchen
Our place of location, in the centre of Upper Austria, where wood-chipping tradition leads to experience:
Always one step ahead
Efforts in research and development are most significant for Eschlböck. As a result, their devices are not only being developed and manufactured in most modern ways of engineering, the company also cares for sustainability:
Eschlböck supports their customers with their gratuitous exchange market of wood chips which is also intended to promote generation of energy from renewable resources and is especially meant to encourage demand of locally available resources to keep transport distances as short as possible.
According to the company's philosophy, the family business is emphatic on a sustainable and enduring connection to their customers, but also on ecological and effective economic activity.