errata no_01 to bidding documents
TRANSCRIPT
-
7/28/2019 Errata No_01 to Bidding Documents
1/12
-
7/28/2019 Errata No_01 to Bidding Documents
2/12
-
7/28/2019 Errata No_01 to Bidding Documents
3/12
ATTACHMENT - 3APAGE 1 OF 1
"CW SYSTEM AND MAKEUP WATER SYSTEM CIVIL WORKS" PACKAGE
FOR
NABINAGAR SUPER THERMAL POWER PROJECT (3X660 MW)
BID DOCUMENT NO. CS-0370-318A-9
(Certificate of Compliance on Qualifying Requirement)
Bidder's Name and Address : ToNabinagar Power Generating Co. Pvt. Ltd.C/o NTPC Limited, Contract Services (CS-II)6th Floor, Engg. Office Complex, Plot A-8A,Sector-24, Noida-201301
Dear Sir,
1.0 With Reference to our Bid Proposal No. . Dated for "CWSystem and Makeup Water System Civil Works" Package for Nabinagar Super
Thermal Power Proejct (3X660MW), Bid Document No. 0370-318A-9, we herebyconfirm that the number of reference works quoted by us in Attachment No.-3 inthe bid, for establishing compliance to the specified Qualifying Requirement (QR),are not more than three (3) number of reference works against each work asspecified in Qualifying Requirement.
2.0 We also confirm that the reference works declared more than three (3) number ofreference works against each work as specified in Qualifying Requirement shall notbe considered for evaluation/establishing compliance to Qualifying Requirement (QR).
3.0 We further confirm that no change or substitution in respect of reference works (asdeclared in our bid) by new/additional plant for meeting the specified QualifyingRequirement (QR) shall be offered by us.
Date : (Signature of the Bidder)..................
Place : (Printed Name)....................................
(D i ti )
-
7/28/2019 Errata No_01 to Bidding Documents
4/12
ATTACHMENT - 3BPAGE 1 OF 2
"CW SYSTEM AND MAKEUP WATER SYSTEM CIVIL WORKS" PACKAGE
FOR
NABINAGAR SUPER THERMAL POWER PROJECT (3X660 MW)
BID DOCUMENT NO. CS-0370-318A-9
(Details of Available Bid Capacity)
Bidder's Name and Address : ToNabinagar Power Generating Co. Pvt. Ltd.C/o NTPC Limited, Contract Services (CS-II)6th Floor, Engg. Office Complex, Plot A-8A,Sector-24, Noida-201301
Dear Sirs,
Details of maximum value of works performed during the last 7 (Seven) years as on thedate of bid opening of Techno-Commercial bids and details of existing commitments and worksto be completed during the next 3 years as on the date of bid opening of Techno-Commercialbids are as under:
(A) Maximum value of works performed during the last 7 years as on the date ofbid opening of Techno-Commercial bids
-----------------------------------------------------------------------------------------------------------------------------
Sl.No. Financial Year Maximum value of works performed
in Rs. (Crores)
-----------------------------------------------------------------------------------------------------------------------------
1. 2012 - 2013-----------------------------------------------------------------------------------------------------------------------------
2. 2011 - 2012
-----------------------------------------------------------------------------------------------------------------------------
3. 2010 - 2011
-----------------------------------------------------------------------------------------------------------------------------
-
7/28/2019 Errata No_01 to Bidding Documents
5/12
ATTACHMENT - 3BPAGE 2 OF 2
(B) Maximum value of existing commitments and works to be completed during
the next 3 years as on the date of bid opening of Techno-Commercial bids
-----------------------------------------------------------------------------------------------------------------------------
Sl.No. Financial Year Value of existing commitments and
Works Rs. (Crores)
-----------------------------------------------------------------------------------------------------------------------------
1. 2013 - 2014
-----------------------------------------------------------------------------------------------------------------------------
2. 2014 - 2015
-----------------------------------------------------------------------------------------------------------------------------
3. 2015 - 2016
-----------------------------------------------------------------------------------------------------------------------------
Date : (Signature of the Bidder)..................
Place : (Printed Name)....................................
(Designation)......................................
(Common seal)...................................
-
7/28/2019 Errata No_01 to Bidding Documents
6/12
ATTACHMENT - 3C
Page 1 of 1
"CW SYSTEM AND MAKEUP WATER SYSTEM CIVIL WORKS" PACKAGE
FOR
NABINAGAR SUPER THERMAL POWER PROJECT (3X660 MW)
BID DOCUMENT NO. CS-0370-318A-9
Bidder's Name and Address : ToNabinagar Power Generating Co. Pvt. Ltd.C/o NTPC Limited, Contract Services (CS-II)6th Floor, Engg. Office Complex, Plot A-8A,
Sector-24, Noida-201301
We hereby confirm that we do not anticipate any change in ownership during proposed period of execution of work (if such a change is anticipated, the scope andeffect thereof shall be defined). The relevant document for same(i.e. in case of changeof ownership) is enclosed to Annexure.............. to this Attachment-3C.
Date : (Signature of the Bidder)..................
Place : (Printed Name)....................................
(Designation)......................................
(Common seal)...................................
-
7/28/2019 Errata No_01 to Bidding Documents
7/12
ATTACHMENT 6 (REV.01)Page 1 of6
CW SYSTEM AND MAKEUP WATER SYSTEM CIVIL WORKS PACKAGE
FORNABINAGAR SUPER THERMAL POWER PROJECT, (3X660 MW)
BIDDING DOCUMENT NO. CS-0370-318A-9
(EQUIPMENT/ MACHINERY DEPLOYMENT SCHEDULE)
Bidder's Name & Address To,
Nabinagar Power Generating Company Private Limited
C/o NTPC Limited,
Engineering Office Complex,Plot A-8A, Sector 24, Noida-201301,
Distt. Gautam Budh Nagar,
State of U.P., India
Sl No Equipment Type/Capacity Min Nos
required as
indicated in
Appendix-II
of Part-A of
Technical
Specs.
No
proposed
to be
deployed
No already
available
for
immediate
deployment
Period by
which
balance
eqpt will be
deployed
Place from
where
balance
eqpt will be
bought
Number
intended
to be
purchased
Period by
which New
T&P can be
deployed
Quantum of
work that can
be achieved
during peak
period/shift
1.Concrete batching plant(minimum one of 40cum/hr capacity & otherof 30 cum/hr capacity)
2
2.Concrete pumps 6
3.Bull Dozer (Heavy Duty) 5
4.Poclain (Shovel)(minimum 1 cum capacityeach)
4
-
7/28/2019 Errata No_01 to Bidding Documents
8/12
ATTACHMENT 6 (REV.01)Page 2 of6
Sl No Equipment Type/Capacity Min Nos
required as
indicated inAppendix-II
of Part-A of
Technical
Specs.
No
proposed
to bedeployed
No already
available
forimmediate
deployment
Period by
which
balanceeqpt will be
deployed
Place from
where
balanceeqpt will be
bought
Number
intended
to bepurchased
Period by
which New
T&P can bedeployed
Quantum of
work that can
be achievedduring peak
period/shift
5.Dumpers 24
6.Trucks 2
7.Rollers (10T capacity) 1
8.Sheep Foot roller 1
9.Vibro Compactor/ Roller 2
10.Water Tankers 2
11. Diesel Power Generator 60 KVA capacity 2
12.Diesel Power Generator 5 KVA capacity
1
13.Survey equipment: TotalStation
2
14.Lab equipment for testingof soil, concrete etc.
As perrequirement
15.Vibrators Needle type 18
16.Vibrator (Float, Plate etc.) 4
-
7/28/2019 Errata No_01 to Bidding Documents
9/12
ATTACHMENT 6 (REV.01)Page 3 of6
Sl No Equipment Type/Capacity Min Nos
required as
indicated inAppendix-II
of Part-A of
Technical
Specs.
No
proposed
to bedeployed
No already
available
forimmediate
deployment
Period by
which
balanceeqpt will be
deployed
Place from
where
balanceeqpt will be
bought
Number
intended
to bepurchased
Period by
which New
T&P can bedeployed
Quantum of
work that can
be achievedduring peak
period/shift
17.Dewater pumps
i) 5 HP
ii) 10 HP to 50HP
6
6
18.Service compressor withhose
6
19.J ack Hammers 4
20. Heavy capacity trailerwith drive units formaterial shifting (10 - 15
T capacity)
3
21.Transit mixers 8
22.Plate bending machine
i) 25 x 2500mm
ii) 20 x 2500mm
2
2
23.Plate straighteningmachine
i) 20 x 2500mm 2
-
7/28/2019 Errata No_01 to Bidding Documents
10/12
ATTACHMENT 6 (REV.01)Page 4 of6
Sl No Equipment Type/Capacity Min Nos
required as
indicated inAppendix-II
of Part-A of
Technical
Specs.
No
proposed
to bedeployed
No already
available
forimmediate
deployment
Period by
which
balanceeqpt will be
deployed
Place from
where
balanceeqpt will be
bought
Number
intended
to bepurchased
Period by
which New
T&P can bedeployed
Quantum of
work that can
be achievedduring peak
period/shift
24.Automatic submerged arcwelding machine M/C
5
25. Semi automaticsubmerged arc weldingmachine
6
26.Welding transformer 12
27.Welding generator 6
28.Pug cutting machine 4
29.Radiographic testingmachine
4
30.Bench grinder 2
31.Hand grinder 8
32.Shuttering material 5000 m
33.Chipping hammers 6
34.Mobile Crane (Min. 10 Tcapacity)
3
35.60 mm Nozzles forvibrators
25
-
7/28/2019 Errata No_01 to Bidding Documents
11/12
ATTACHMENT 6 (REV.01)Page 5 of6
Sl No Equipment Type/Capacity Min Nos
required as
indicated inAppendix-II
of Part-A of
Technical
Specs.
No
proposed
to bedeployed
No already
available
forimmediate
deployment
Period by
which
balanceeqpt will be
deployed
Place from
where
balanceeqpt will be
bought
Number
intended
to bepurchased
Period by
which New
T&P can bedeployed
Quantum of
work that can
be achievedduring peak
period/shift
36.Mechanical Excavator of0.9 Cu.M capacity
1
37. Loaders 1
38.Plate vibrator 2
39.Grab of 0.75 cubic yardcapacity with adequatespares
1
40.Air compressor of 250
cfm capacity
1
41.Complete set of diversequipment along withdivers helmet etc.
1 Set
42.Chisel 1
43.Kentledge and structuralsteel supports forkentledge
1 Set
44.Passenger boat 1
45.Bridge work enablingstructure
1 Set
46.Hydra type crane 1
-
7/28/2019 Errata No_01 to Bidding Documents
12/12
ATTACHMENT 6 (REV.01)Page 6 of6
Sl No Equipment Type/Capacity Min Nos
required as
indicated inAppendix-II
of Part-A of
Technical
Specs.
No
proposed
to bedeployed
No already
available
forimmediate
deployment
Period by
which
balanceeqpt will be
deployed
Place from
where
balanceeqpt will be
bought
Number
intended
to bepurchased
Period by
which New
T&P can bedeployed
Quantum of
work that can
be achievedduring peak
period/shift
47.Gas cutting sets 2
48.Equipment required for
geotechnicalinvestigations
a) Rotary mudcirculations rigs
b) Menard pressuremeter orequivalent setupwith limit pressure
of 80kg/cm2
49.Any other majorequipment proposed tobe used for thesatisfactory completion ofthe work
Notes : These requirements and capacity of the equipment are indicative only and not exhaustive and deployment of equipment,machinery and labour shall be suitably augmented to achieve the timely completion of the work as per the programme and
direction of the Engineer-in-Charge, without any additional liability to NTPC.
Signature ..........................................................................Printed Name of authorised personhaving power of attorney..................................................Designation..........................................................................Date and Place.....................................................................
Common Seal of firm ........................................................