equipo para correr registros electricos-clase unacar ing petrolera.pdf

7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf

1/14

7-14 Slickline Service Equipment

Slickline Skid Units and Trucks

Halliburton designs and manufactures top quality skid-base

units for offshore operations and trucks for land operations.The units are known worldwide for their user-focused

design, providing the right mix of operator-friendly

components to make both specialized and standard

operations more productive. For more detailed information,please contact your local Halliburton representative.

Stainless Steel Skid UnitSlickline Container Unit

T800 Slickline Crane Truck

Offshore Three-Piece

Skid Unit

HAL22808

HAL22809

HAL22810

HAL22811

HAL22812


2/14

Slickline Service Equipment 7-15

Surface Service Equipment

Halliburtons wellhead pressure control equipment

provides for a safe and highly productive service operation.

Unmatched equipment quality backed by availableextensive training and maintenance instruction has made

Halliburton the industrys premier provider of this type of

equipment and services. For more detailed information,

please contact your local Halliburton representative.

Options: Slickline Grease

Head

Liquid Chamber

Lubricator Control(Purge) Valve

Hydraulic Stuffing Box(16-in. Sheave)

Quick Union

Upper LubricatorSection

Quick Union

Middle LubricatorSection

Lubricator PickUp Clamp

Quick Union

Lower Lubricator

Section

Quick Union

Flanged TreeConnection

Options:Lubricator

Option: Pump-In Sub

Options: Wireline Valve

Dual (Manual or Hydraulic)

Wireline ValveTriple (Manual or Hydraulic)Wireline Valve

Single

(Manual or Hydraulic)

Safety ValvePin End Assembly

Slickline Grease Head

Liquid Chamber

Dual Wireline Valve


Triple Wireline Valve


HAL22753

HAL22754

HAL22755

HAL2275

6

HAL22757


3/14


AdvancedSlickline Services

Highly developed measurement and innovative downhole

tools provide low-cost slickline solutions for wellinterventions.

Halliburton Advanced slickline services let you set and

retrieve packers, plugs, and monobore flow controls, and

perforate, cut casing, and tubingall with depth accuracy

comparable to electric line with the efficiency of slickline.

Halliburtons innovative slickline technology produces depth

measurements so accurate you can now use slickline

procedures for many services traditionally reserved for

electric line operations. Procedure for procedure, when

compared to electric line, Halliburton's new slickline

technology substantially lowers your total cost.

Key developments make this revolutionary advance in

slickline utility possible:

An advanced measurement system that makes slickline

depth readings comparable to electric line depth

readings

A slickline collar locator that pinpoints tubing or casing

collars

A downhole power unit that eliminates the need for

explosives to set packers and plugs

An electronic triggering device that fires perforating and

cutting charges

A data/job logger that produces real-time slickline collar

logs or customer job summary

A wire inspection device that detects abnormalities in

slickline to facilitate wire management and reduce

premature failures

Unprecedented Slickline Accuracy

Halliburton's Advanced Measurement System (AMS) uses

microprocessor technology to take the guesswork out of

slickline depth measurements. Yes, we still count wheel turns.But, the processor not only counts wheel turns, it also

instantly and continuously adjusts for the effect of ambient

temperature on counter wheel size and for tension-caused

line stretch measured with an electronic load sensor. Depth,

tension, and line speed are logged and a hard copy printed in

real time, guiding the operator and providing a permanent

job record.

Correlate to the Original Log to Identify Collar Locations

Halliburton's exclusive slickline collar locator furtherenhances data accuracy. As it passes a tubing or casing collar,

it increases line tension. The tension spikes are recorded in

real time on the permanent job log so the operator always

knows the precise tool location in relation to the tubing or

casing collars.

Set Packers and Plugs Without Explosives

The remarkable Halliburton DPU downhole power unit

eliminates the need to use explosive charges to set packers

and plugs. The slow controlled force provided by an

electromechanical powertrain improves setting

performance for downhole equipment, such as packers,

where improved element compression and a more uniform

slip set are obtained.


4/14


Advanced Slickline Service Tools

JobTrakData Logger

Advanced Measuring System (AMS)

LineTrakInspection Device

Advanced

Slickline

Service Unit

SmartETD

System

Perforating Gun

CollarTrak

Slickline Collar

Locator

DPU

Downhole

Power Unit

Memory Production Logging CCL/Gamma Ray

Pressure

Temperature

Capacitance Water Holdup

Filled Density (Differential Pressure)

Fullbore Spinner and Continuous

Bridge Plug

MonolockPlug Packer Perforator


5/14


CollarTrakSlickline Collar Locator

The Halliburton CollarTrak slickline collar locator consists

of a standard electric line collar locator, an electronic sub-assembly, and a magnet/drag sub-assembly. When the collar

locator senses a tubing or casing collar, it signals theelectronic sub-assembly, which instantaneously activates

magnets in the magnet/drag assembly. The magnets increasefrictional engagement to the pipe wall, creating a brief butsignificant increase in line tension.

Halliburton's advanced measurement system detects the

tension increase and sends the data signals to the data/joblogger, which records it as a well-defined spike on the log.

The advanced measurement system automatically and

continuously compensates for line stretch, assuringlog accuracy.

The tool, which is powered by alkaline batteries, locatescollars in up to 13 chrome pipe and in flush-joint tubing.

CollarTrak Slickline Collar Locator

HAL8887

Slickline Collar Locator (SLCL) (with Power Pack) Specifications

Sizein. (mm)

Tubingor

CasingSize in.

Max ODMagnets

Collapsedin. (mm)

Max ODMagnets

Expandedin. (mm)

OptionalLargerMagnetHousing

Max OD LargerMagnet Housing

Collapsedin. (mm)

Max OD LargerMagnet Housing

Expandedin. (mm)

MaxOperatingPressure

psi

MaxOperating

Temp.F

OverallLength

in. (mm)PowerSource

TopConnection

Bottom ToolConnection

2.50(64)

3 1/2-41/2

2.50(64)

3.85(98)

No N/A N/A 15,000 30095.3

(2.421)AA sizeBatteries

1 5/16-in. -10UNS pin

1 5/16-in. -10UNS box

3.66(93)

5 1/2-7 5/8

3.66(93)

5.50(140)

Yes5.70(145)

7.50(191)

10,000 25069.8

(1.773)C sizeBatteries

1 1/16 in. -10UNS pin

1 1/16 -10UNS box

1.69(43)

2 3/8-2 7/8

1.69(43)

3.06(77)

No N/A N/A 15,000 30034.12(.86)

AA sizeBatteries

1 5/16 in. -10UNS pin

15/16 in. -10UNS box

All sizes are alloy material and have three magnets.


6/14


HAL8356


7/14


Advanced Measurement System (AMS)

The electronic advanced measurement system (AMS)

measures tension and depth, compensates for wire stretchand temperature effects on the measuring wheel, and reports

a corrected depth reading. This model of the AMS system isdesigned to be mounted inside a wireline operator cabin.

Other features also help improve the quality of a service job.A differential load indicator indicates small changes inpickup weight. Digital displays can be switched between

English and metric measurements at any time. Theapproaching surface alarm warns the operator as the tools

near the surface. The excessive tension function works withthe hydraulic system to limit the maximum line tension to an

adjustable preset value. The system allows the operator toinput a rig-up angle for accurate line tension readings.

When used with a Halliburton two-wheel counter with auniversal measuring wheel, the AMS gives accurate depthreadings for any size wire, in English or metric, without

changing wheels.

This model has digital and analog displays with switch inputcontrols and RS-232 output for data acquisition with alaptop computer.

Panel AMS will not work with IS (Class 1 Division 2)

counter. This system requires an electronic strain gauge loadsensor and an optical encoder.

Standard Mounted Equipment

Automatic depth adjustment

Line tension adjustment

Depth offset adjustment

Ambient temperature correction

Analog line tension display

Analog differential line tension display

Digital line tension display

Digital line depth display

Digital line speed display

RS-232 serial port output for corrected depth, line speed,line tension, units of measurement, and time

Advanced Measurement System

HAL88

90


8/14


Electronic Advanced Measurement System (Portable)

This portable model has a flat screen display, keypadfunctional inputs, and extended RAM for data storage.

A RS-232 serial port is provided for real-time data retrieval.

This system requires an electronic strain gauge, load sensor,

and an optical encoder. The portable unit is available forstandard and hazardous Class I Division 2 operation.

Standard Portable Model Equipment

Automatic depth adjustment

Line tension adjustment

Depth offset adjustment

Ambient temperature correction for counter wheel

Analog line tension display

Analog differential analog line tension display

Digital line tension display

Digital line depth display

Digital line speed display

RS-232 serial port output for corrected depth, line speed,

line tension, units of measurement, and time

Integrated AMS Advanced Measurement System


9/14


JobTrakData Job Logger

The JobTrak data job logger is used with the Halliburton

advanced measurement system to produce summary logs

that provide a real-time plot of depth, line speed, and linetension. The data logger consists of a portable computer and

thermal printer packaged in a heavy-duty carrying case. It is

connected to the AMS system through a RS-232 port, and the

computer is programmed to convert the AMS data to

graphical form. The data logger can be powered using 12 to

30 volts DC or 110 to 240 volts AC.

Standard Mounted Equipment

Temperature rating: -10 to 110F

Power supply: 12-30 VDC or 110-240 VAC

Maximum line speed: 3,000 ft/min (914 m/min)

Maximum line tension: 5,000 lb (2267 kg)

Plot units per hour settings: 4 in./hr or 8 in./hr

(10 cm/hr or 20 cm/hr)

JobTrak Data Job Logger

HAL8322


10/14


LineTrakSlickline Inspection Device and Wire Management Program

The Halliburton LineTrak slickline

inspection device spots problems that

simply would be impossible for even aveteran slickline technician to detect.

The device is used to provide

continuous inspection of the entire line

not just selected areas and provides

inspection of both in-service lines as

well as new lines as it is spooled.

Wire Management Program

In addition to periodic inspections for

line abnormalities, a permanent recordof each lines job history, when utilizing

Halliburtons AMS advanced

measurement system and the JobTrak

data logger, provide a basis for

predicting line failures due to normal

job-related stresses and exposure to

hostile well environments.

Wire inspections have become an

integral component of Halliburtons

extensive Wire Management

Programa program designed to

prevent on-the-job failures.

The LineTrak slickline inspection

device spots problems before they cause

downhole line failure. The followingare examples of problems detected by

the LineTrak device.

This 0.021-in. deep crack (100x magnification)

was detected in a nickel alloy wire with

1,850 cycles.

Damage on left was detected at 462 ft and on

right at 368 ft (arrow points to pit on wire) on a

nickel alloy wire.

Abrasion damage on this cobalt alloy wire was

detected before it could cause wire separation.


11/14


Deepwater Riserless Subsea Light WellIntervention System

The Halliburton deepwater riserless subsea light well

intervention system offers complete well interventionsolutions.

Features

Reduced well intervention costs on subsea wells

No workover riser during operation

System can be operated from a more cost-effective

intervention DP vessel

Ideal intervention method on deepwater wells

Increases subsea well availability

Reduced chance of damage resident pipelines and

structures

Deepwater Riserless Intervention System


12/14

SOLUCIONES INTEGRADAS PARA POZOS ENTUBADOS MAXIMICE SU PRODUCCION

El Valor de la Experiencia

Estamos comprometidos con el diseo y fabricacin de las herramientas mas sofisticadas disponibles en la industria. Nuestros altos ndices de

satisfaccin del cliente son el resultado directo del uso de herramientas de alta calidad y del trabajo de nuestro personal altamente calificado

y experimentado.

Alt ernat ivas Sin Uso de Explo siv os

En algunos pases, los tiempos de espera o de envo deexplosivos para realizar operaciones de rutina, tales comodisparos o cortes de tubera, contribuyen en gran medida a

los ndices de Tiempo No Productivo o NPT. Talesretrasos pueden llegar a costar meses de trabajo.Halliburton ofrece un rango variado de solucionesefectivas sin uso de explosivos para reducir estos NPT.

Por ejemplo, hemos desarrollado mtodos para: Perforar tuberas de revestimiento y limpiar el tnel de

disparo utilizando fluidos

Perforar, rasgar y degradar tubera con fluidos o brazos

mecnicos Cortar tuberas con herramientas de corte radial y

tecnologa de flama Asentar tapones y empacadores electromecnicamente

Liderazgo en la Industria de Servicios de Lnea de Acero

Halliburton invent el uso comercial de esta tecnologa yaun es el lder a travs de una amplia gama de serviciosde registros, disparos y servicios mecnicos.

Gracias a nuestro generador patentado DownholePower Unit (DPU) (Ver pgina opuesta), casi todo loque anteriormente hacamos con tecnologa de cableelctrico, lo podemos hacer ahora por medio detecnologa de lnea de acero.

Esto es significativo debido a que las herramientas delnea de acero son generalmente de menor tamao queotros tipos de herramientas para el mismo propsito. Por

lo tanto, entran y salen de manera mas rpida y fcil,

reduciendo los costos de operacin.

Herramientas de Registros de Produccin para Todos losAmbient es

Si su pozo es vertical, desviado u horizontal, nosotros

fabricamos sensores y hardware para registros deproduccin de memoria y en tiempo real: Medicin de la tasa de flujo medidor de flujo

continuo, medidor de canasta y medidor de arreglo depropelas

Identificacin de fluidos y composicin del flujo medidor de presencia de gas, medidor de presencia de

agua de efecto capacitivo, medidor de densidad de

fluido con principio radiactivo, medidor de densidadpor presin diferencial, arreglo capacitivo paraidentificacin de fluidos

Diagnstico de pozos y condiciones de flujo presin,temperatura, calibrador X-Y, inclinmetro

Herramienta de correlacin rayos gamma, localizadorde coples de tubera de revestimiento

Los intervalos entre las lecturas pueden ser tan cortoscomo de 0.1 segundos o tan largos como varias horas.Una vez que los registros estn completos, el proceso defusionar los datos de tiempo de registro y de profundidad

es muy rpido.


13/14

HEST-ICH

Integrated Cased Hole

Te new Halliburton Integrated Cased-Hole truck is a combination

unit capable o perorming all cased-hole logging, including

perorating and slickline operations.

Te unit is built on a Euro 5 Mercedes-Benz chassis, with a

US-built body. It is equipped with standard hydraulics, reel

package, and a measuring and cabling system.

Te equipment design, data, related details, and documentation

are in conormance with IEC 60204, 5th Edition 2005-10. All

components have been upgraded, including the truck chassis,

a Mercedes-Benz Actros, equipped with a powerul BlueEC 5

(Euro 5) 408-HP/1800-rpm engine.

Tis truck is designed and built to comply with all directives

required by the European Market, and has earned the marking

granted by the authorized third-party evaluator.

Te Integrated Cased-Hole truck is accompanied by a trailer fitted

with the pressure control equipment, including the wireline valve,

lubricators, grease injection pump, hydraulic control module, andthe required well adapters.

Tis innovative and integrated solution allows Halliburton to

provide our clients with a single set o equipment and the associated

crew to perorm both slickline and eline services, reducing

operating costs or our clients and increasing efficiency and value.

Halliburton Integrated Cased-Hole Truck

Te spacious 97-in. x 96-in.

(246.4-cm 243.8-cm) cabin

includes two workstations, and

ample room to accommodate

two operators and customer

representatives. It includes

tool racks and two built-in

workbenches, with tool boxes,

or slickline operations.

HAL38453

Chassis Specifications

Model Mercedes-Benz Actros

Drivetrain 64

Cab M-Cab

Wheelbase 165 in. / 4,200 mm

Gross Vehicle Weight 57,320 lb / 26,000 kg

Engine Model OM501LA

Engine Type V6 Direct Injection Diesel

Engine Power (1800 rpm) 408 HP / 300 kW

Engine Torque (1800 rpm) 1,475 lbf.ft / 2,000 Nm

Maximum Speed 1,500 rpm

PTO NB1

PTO Ratio 1.7

PTO P (maximum) 207 HP / 155 kW

PTO T (maximum) 376 lbf.ft / 510 Nm

Integrated Cased-Hole Truck DimensionsHAL

38450

HAL38451

353 1/8

353.125

1493

/8

100.

3937


14/14

HEST-ICH

2013 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in thecontract between Halliburton and the customer that is applicable to the sale. H09909-A4 1/13

www.halliburton.com

For more information, contact your local

Halliburton representative.

Dual-Reel Package Specifications

E-Line Reel S-Line Reel

Core 15 in. (38.1 cm) 19.75 in. (50.2 cm)

Flange Diameter 39 in. (99.1 cm) 26 in. (66.0 cm)

Width 32.036 in. (81.4 cm) 25.5 in. (64.8 cm)

Capacity 29,116 ft (8,875 m) of5/16-in. cable

30,000 ft (9,144 m) of0.092-in. wire

25,000 ft (7,620 m) of0.125-in. wire

Gear Box Type Rexroth GFT-17 Fairfield W6C700413X

Gear Box Ratio 45:1 13:1

Maximum Speed

ft/min, m/s

500

2.54

2,800

14.2

Maximum Line Pull

(Core-Full)

12,000 to 6,000 lb

5,443 to 2,722 kg

3,800 to 2,800 lb

1,724 to 1,270 kg

Electric Generator Specifications

Model 284PDL1750

Type MagnaPlus

Output 230 VAC

Frequency 50 Hz / 1,500 rpm

Output Power 36 HP / 27 kW Maximum

Regulator SE-350

MAKO Counter Specifications

Height 36.7 in. 0.932 m

Length 48.6 in. 1.234 m

Width (Base) 12 in. 0.305 m

Width (Overall) 12.8 in. 0.325 m

Weight 132 lb 60 kg

Maximum Tension 15,000 lb 6,800 kg

Line Sizes .092 in. to 5/16 in. 2.34 mm to 7.94 mm

Encoder 600 or 1,200 PPR

Backup Counter 4 PPR Quadrature

Load Pin Passive Bridge 1.5v Differential 4-20 maCurrent Loop

Te dual-reel package includes a logging #14 reel and a slickline0.092/0.125 reel, which allows the unit to work with a largeselection o slickline wires or e-line cables up to 5/16 inches.

Te reels are quick-change direct-drive units with no chains.Teir hydraulic system uses a Rexroth AA4VG 71cc pump and80CC motors. A slow-speed valve is included, allowing loggingspeeds as low as 1 pm. Te system is equipped with a ail-saehydraulic braking system, allowing the operator to perormone-handed jarring actions.

HAL38452

A 35-gallon (133-L) tank o hydraulic fluid eeds the closed-loopsystem. It includes the 71-cc pump, the auxiliary pump orspooling, and a Rexroth AA4V56, which drives the 27-kWMarathon Hydraulic generator:

Te truck is electrically wired with 220 VAC/ 50 Hz and 24 VDC,per European requirements. A step-down transormer is used to

provide 110 VAC or the Cased-Hole LOGIQ system. A 24 V to 12 V DCconvertor is also used to supply 12 volts to the system.

Te measuring system includes a Benchmark AMSLA513 MAKOhead, a heavy-duty Sl/EL measuring device or wirelines rom0.092 in. to 0.160 in. and E-lines/braided lines rom 3/16 in. to5/16 in., as shown here:

Te MAKO head provides depth and tension inormation to the

AMS-95 panel, which is used to acquire and display this data.Te panel provides the operator the means to set and makeadjustments to the data as necessary. Te AMS-95 has a tensionshot down and wire-management sofware or extra saety andto prevent wire damage. Depth is displayed rom data providedby an encoder mounted on a measuring device. Te tension datais provided by a load pin, and is also passed through to theCased-Hole LOGIQ acquisition system.

equipo para correr registros electricos-clase unacar ing petrolera.pdf

Documents