equipment & engine training counciltwo stroke engine study guide the equipment & engine...
TRANSCRIPT
STUDY GUIDES • TRAINING BOARDS • TEXTBOOKS/MANUALS • ENGINE TRAINING KITS • CD’s • DVD’S • POWERPOINTS REPLACEMENT PARTS • WORKBENCHES
CATALOG Equipment & Engine Training Council
Equipment & Engine Training Council
2 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Table of Contents
Study Guides ..................................................................... 3
Textbooks ......................................................................... 4
CE9001A - OHV 950 Series™ Engine Training Kit .................. 10
CE9001 - AOHV 950 Series™ Kit Parts List ........................... 11
CE9028A - OHV 950 Series™ Engine Upgrade Module ............ 12
CE9065 OHV - 725 Series™ Engine Training Kit .................... 13
CE9040A - OHV 950 Series™ Engine Training Kit .................. 14
Engine Replacement Training Kits ....................................... 15
CE9041A - OHV 950 Series™ ............................................. 15
CE9066 - OHV 725 Series™ ................................................. 15
CE9053A Super-Sized OHV 950 Series™ .............................. 16
CE9067 Super-Sized OHV 725 Series™ ................................ 16
CE9056 - Vanguard™ V-Twin OHV Engine Kit ....................... 17
Quick Reference Kit Guide ................................................. 18
Teaching Aid Books & Manuals ........................................... 19
DVDs Theory Programs ..................................................... 22
DVDs – Maintenance & Troubleshooting Programs ................. 24
PowerPoint Training CDs .................................................... 26
NHUQM5 - Power Equip. Electrical Training Board ................. 28
KNJOUX - Basic Electrical Training Board ............................. 29
TMTAGM - Electronic Fuel Injection Training Board ................ 30
D2K2JH - Briggs & Stratton Educational Clear Carburetor ...... 31
GNB4K4 - Briggs & Stratton Demonstration Unit ................... 31
ECHO - 2-Stroke Engine Training Kit ................................... 32
ECHO - Tools Fuel System / Carburetor Tools ....................... 34
Crankcase/Compression Testing Tools ................................. 35
ECHO - Ignition/Tachometer Testing Tools ........................... 36
ECHO - Clutch & Flywheel Tools .......................................... 37
Briggs & Stratton Specialty Tools ........................................ 38
Ultrasonic Carburetor Cleaners .......................................... 40
Greenlee Multimeters ........................................................ 41
Greenlee WorkBench ......................................................... 42
EETC-2019 CaTalog — 3For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Study Guides
Four Stroke Engine Study GuideThe Equipment & Engine Training Council’s Four Stroke Study Guide will help prepare you for the Four Stroke Engine certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 167 pages with 80 illustrations, softcover.
Two Stroke Engine Study GuideThe Equipment & Engine Training Council’s Two Stroke Study Guide will help prepare
you for the Two Stroke Engine certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 64 pages with
46 illustrations, softcover.
Compact Diesel Study GuideThe Equipment & Engine Training Council’s Compact Diesel Engine Study Guide will help prepare you for the Compact Diesel Engine certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 80 pages with 53 illustrations, softcover.
Electrical Study GuideThe Outdoor Power Equipment Electrical Systems textbook by William Schuster is used as our Electrical Study Guide, it will help prepare you for the Electrical certification test. All areas covered in the textbook will be included on the test in one form or another. There are self-test questions taken from in the
textbook so that you can check yourself. The answers for the sample questions are in the textbook. Consists of: 140 pages with 244 illustrations, softcover.
Driveline/Hydraulics Study GuideThe Equipment & Engine Training Council’s Driveline/Hydraulics Study Guide will help prepare you for the Driveline/Hydraulics certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 114 pages with 61 illustrations, softcover.
Mechanical Systems Study Guide
The Equipment & Engine Training Council’s Mechanical Systems Study Guide will help prepare you for the Mechanical Systems certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides
so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 194 pages with 177 illustrations, softcover.
Generator Study GuideThe Equipment & Engine Training Council’s Generator Study Guide will help prepare you for the Generator certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 94 pages with 118 illustrations, softcover.
Reel Technology Study Guide The Equipment & Engine Training Council’s Reel Technology Study Guide will help prepare you for the Reel Technology certification test. All areas covered in the guide will be included on the test in one form or another. There are self-test questions taken from in the study guides so that you can check yourself. The answers for the sample questions are in the study guide. Consists of: 44 pages with 34 illustrations, softcover.
4 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Small Engines
• 4th Edition © 2016
• ISBN: 978-0-8269-0033-3
• Author: R. Bruce Radcliff
• Textbook: 390 pages, 347 illustrations, hardcover
Small Engines is a comprehensive textbook that presents small engine operation and service principles using concise text, detailed illustrations, and practical applications. The content is based on fundamental concepts and technician requirements in the industry. The textbook explains the why of engine design and the how of operation as well as basic repair.
Small Engines Workbook
• Edition © 2016
• ISBN: 978-0-8269-0034-0
• Workbook, Softcover
The Small Engines Workbook provides two practice tests per chapter plus a comprehensive exam.
Textbooks
Small Engines Instructor Resources
• 4th Edition © 2016
• ISBN: 0036IR
The Instructor Resources (IR) Complete Online Package contain the instructional tools needed for a comprehensive program. In addition to the digital
resources that come with the textbook, the Online Instructor Resources also provide the following components:
• Premium PowerPoint® Presentations review key concepts for each chapter and include presentation notes.
• Instructional Guide provides an overview of how to structure an instructional program and make the best use of the instructional tools provided.
• Image library provides all of the numbered figures in a format that can be manipulated by the instructor for maximum use.
• Assessments include pretest, posttest, and a bank of test questions for each chapter that can be used to document knowledge and skills.
• Answer Keys list answers to the pretest, posttest, textbook, and study guide questions.
• ATPeResources.com links to online resources that support continued learning.
Note: Other resource items are available please go to www.eetc.org to learn more.
EETC-2019 CaTalog — 5For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Small Engine and Equipment
Maintenance
• © 2012
• ISBN: 978-0-8269-0048-7
• Author(s): Donald R. Koloski, R. Bruce Radcliff
• Consists of: 202 pages, 154 illustrations, softcover
Small Engine and Equipment Maintenance is a comprehensive compilation of small engines and the maintenance practices that are required to maintain the efficiencies and durability of residential and commercial power equipment. The materials have been designed to support an entry-level small engines program and a small engines owner looking to prolong their power equipment investment. Quick response code technology is incorporated throughout that references easy-to-understand procedures and identifies critical operation components. The learner will reference this well after they leave the classroom.
Small Engine and Equipment
Maintenance Workbook
• © 2012
• ISBN: 978-0-8269-0045-6
• Workbook, Softcover
Small Engine and Equipment Maintenance Workbook reinforces the concepts presented in the text.
Small Engine and Equipment
Maintenance Instructor’s
Resource
• © 2012
• ISBN: 978-0-8269-0047-0
The Small Engine and Equipment Maintenance is an implementation package designed to maximize the impact of the text and workbook. It contains instructional plans and PowerPoint® slides for each chapter of the text, test banks, flash cards, and a variety of other instructional tools.
Note: Other resource items are available please go to www.eetc.org to learn more.
6 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Small Gas Engines,
11th Edition
• ©2017
• ISBN: 978-1-63126-390-3
• Author(s): Alfred C. Roth, Blake J. Fisher, and W. Scott Gauthier
• Consists of: 560 pages, hardcover
Small Gas Engines explores the principles of small gasoline engine design, construction, and operation. It also presents a detailed overview of small engine maintenance, troubleshooting, rebuilding, and repair. In addition, this comprehensive textbook includes extensive coverage of outdoor power equipment applications and the specialized service procedures related to each type of equipment.
Small Gas Engines,
11th Edition Workbook
• ©2017
• ISBN: 978-1-63126-391-0
• Author(s): Alfred C. Roth, Blake J. Fisher, and W. Scott Gauthier
• Consists of: 208 pages, softcover
Organized to follow the textbook on a chapter-by-chapter basis, providing questions to help the student review the material presented in the chapter. This supplement is a consumable resource, designed with perforated pages so that a given chapter can be removed and turned in for grading or checking.
Small Gas Engines,
11th Edition Instructor’s
Resource
• ©2017
• ISBN: 978-1-63126-397-2
• Author(s): Alfred C. Roth, Blake J. Fisher, and W. Scott Gauthier
This Instructor’s Resource CD contains the following items:
• Instructor’s Resources. An introduction and overview of teaching material. Files are in Portable Document Format (PDF).
• EETC Sample Tests. EETC Sample Tests in PDF format.
• Correlation Charts. Correlation Charts aligning the text with curriculum standards. Files are in Portable Document Format (PDF).
• Answer Keys. Textbook and Workbook Answer Keys in PDF format.
• Lesson Plans. Customizable daily Lesson Plans in Microsoft Word (DOCX) format
Text Books Continued
Note: Other resource items are available please go to www.eetc.org to learn more.
EETC-2019 CaTalog — 7For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Two-Stroke Engines
• ©2018
• ISBN: 978-1-63126-862-5
• Author: Harry Senn
• Consists of: 200 pages, softcover
Two-Stroke Engines cultivates a sound understanding of two-stroke engines used in the outdoor power equipment industry. This comprehensive textbook is designed to help students learn the construction, operation, service, and repair of modern two-stroke engines. It features numerous illustrations and photographs for dynamic visual instruction.
• Covers engines produced by a variety of leading two-stroke engine manufacturers, with a special focus on handheld engine designs that meet the standards for the Clean Air Act.
• Prepares students for the Equipment and Engine Training Council’s Two-Stroke Engine Certification, which is widely recognized by prospective employers in the industry.
Two-Stroke Engines
Instructor’s Resource CD
• ©2018
• ISBN: 978-1-63126-868-7
• Author: Harry Senn
This Instructor’s Resource CD contains the following items:
• Instructor’s Resources. An introduction and overview of teaching material. Files are in Portable Document Format (PDF).
• Answer Keys. Chapter Answer Keys in PDF format.
• Lesson Plans. Customizable daily Lesson Plans in Microsoft Word (DOCX) format.
Two-Stroke Engines
Instructor’s Presentations
for PowerPoint® CD
• ©2018
• ISBN: 978-1-63126-870-0
• Author: Harry Senn
This product contains presentations in PowerPoint format for each of the 9 chapters, comprising over 720 slides of instructional material. This is an Individual License.
Note: Other resource items are available please go to www.eetc.org to learn more.
8 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Diesel Technology,
8th Edition
• ©2016
• ISBN: 978-1-61960-832-0
• Author: Andrew Norman
Consists of: 640 pages, hardcover
Diesel Technology covers the design, construction, operation, diagnosis, service, and repair of both mobile and stationary diesel engines. The 2016 edition of this comprehensive text has been updated throughout and includes new information on engine control systems, fuel injection systems, and exhaust after-treatment systems. Content relates to on- and off-road vehicles, as well as marine, agricultural, and industrial applications.
Diesel Technology,
8th Edition Workbook
• ©2015
• ISBN: 978-1-61960-835-1
• Author: Andrew Norman
• Consists of: 300 pages, softcover
The Workbook for Diesel Technology provides a thorough guide to accompany the Diesel Technology textbook. It highlights information, improves understanding, and simplifies the contents of the text. Answering the workbook questions will help you remember important ideas and concepts covered in the Diesel Technology textbook.
The workbook contains questions that serve as an additional study guide to Diesel Technology. The workbook units correlate with those in the textbook. The order of the questions follows the sequence of the textbook material. This will make it easier for you to find information in the text and also to check your answers.
Diesel Technology,
8th Edition Instructor’s
Resource CD
• ©2015
• ISBN: 978-1-61960-838-2
• Author: Andrew Norman
This Instructor’s Resource CD contains the following items:
• Instructor’s Resources. An introduction and overview of teaching material. Files are in Portable Document Format (PDF).
Text Books Continued
Note: Other resource items are available please go to www.eetc.org to learn more.
EETC-2019 CaTalog — 9For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Power Equipment Engine
Technology, 1st Edition
• ©2011
• ISBN: 9781418053888
• Author: Edward Abdo
• Consists of: 464 pages, hardcover
POWER EQUIPMENT ENGINE TECHNOLOGY (PEET) is a comprehensive textbook designed to meet the basic needs of students interested in the subject of small engine repair by helping instructors present information that will aid in the students’ learning experience. The subject matter in PEET is intended to help students become better qualified employment candidates for repair shops looking for well-prepared, entry-level technicians.
Power Equipment Engine
Technology Workbook
• ©2011
• ISBN: 978-1418053895
• Author: Edward Abdo
• Consists of: 208 pages, softcover
Advance your knowledge of small engines theory and repair with these extra activities, review questions, and job sheets for performing common maintenance and repair tasks.
Power Equipment Engine
Technology Instructor
Resources CD
• ©2011
• ISBN: 9781418053901
• Author: Edward Abdo
This CD-ROM includes a PowerPoint presentation with images, chapter-end questions in Word, an Image Gallery, and a test bank to help instructors better manage classroom preparation and testing.
• Instructor’s Guide
• Chapter Presentations in PowerPoint
• Image Library
• Chapter Test in Microsoft Word
• Answer key to Instructor resources Chapter Tests in Microsoft Word
• Answer Key to Student Workbook Chapter Test
Note: Other resource items are available please go to www.eetc.org to learn more.
ADVANCED KIT - Complete Curriculum for 20 students.
10 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Updated with new Model 130G00 950 Series™ engines and additional tools and parts
This complete course curriculum is refined from the Briggs & Stratton Authorized Field Service School, widely acclaimed as the best small engine training school in the industry. Developed from years of training experience and built around a textbook written by the Briggs & Stratton Customer Education Department, you are assured a thorough, in-depth study of Briggs & Stratton engines. Included with the purchase of this kit is admission to one of our 4-day Vo-Ed Training Courses of your choice at the Briggs & Stratton Customer Education Center in Milwaukee, Wisconsin*. Once trained with curriculum in place, the instructor will be able to provide a comprehensive and accurate small gasoline engine program for the students.
New instructors will benefit from having a complete day-to-day lesson plan. For more advanced classes it is relatively simple to construct a custom made program based on your needs from the textbook table of contents or your experiences at the instructor training session. It is beneficial for instructors to have some air-cooled engine or automotive/motorcycle/marine engine experience before attending advanced courses.
Included in this package is a DVD containing video and PowerPoint presentations, outlines for the instructor to develop competence, and two methods for teaching the course curriculum.
The combination of textbooks, student workbooks, repair manuals and audio/visual training aids allows tremendous flexibility in how to teach various subjects. The extensively illustrated textbook is the “why”, the repair manuals the “how” and the workbooks containing the student labs are the “reinforcement.”
* Please bear in mind that the instructor training offered includes the school, 5 nights of lodging and lunch each day. You will be responsible for transportation to/from Milwaukee. Transportation from the hotel to Briggs & Stratton will be provided.
9 0 0 0 0
9 7 8 0 8 2 6 9 0 0 3 4 0
ISBN 978-0-8269-0034-0
R. Bruce Radcliff
Rad
cliff
OHV 950 SERIES™ ENGINE INSTRUCTOR’S REFERENCE DVD
CUSTOMER EDUCATION
BRIGGSandSTRATTON.com | ThePowerPortal.com©2014 BRIGGS&STRATTON CORPORATION
CE3137-11/14
CE9001A - OHV 950 Series™ Engine Training Kit
EETC-2019 CaTalog — 11For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
ITEM DESCRIPTION PART # QTY
Engines OHV Engine 130G32-0022-F1 10
Support Parts Engine Gasket Set 594951 10
Support Parts Crankcase Cover Gasket 590608 30
Support Parts Head Gasket 591445 30
Support Parts Ring Set 592957 4
Support Parts Flywheel Key 797286 20
Repair Manual Single Cylinder L-Head Repair Manual 270962 1
Repair Manual Vanguard™ V-Twin Repair Manual 272144 1
Repair Manual OHV Single Cylinder Repair Manual (case) 276781 26
Book Small Engine and Equipment Maintenance Book CE8155 20
Textbook Small Engines Textbook CE8020 20
Workbook Small Engines Workbook CE8021 20
Workbook Answer Key Small Engines Workbook Answer Key CE8022 1
CD Basic Engine Systems CD CE3017 1
CD Fuel Delivery Systems CD CE3056 1
DVD OHV 950 Series™ Engine Instructor’s Reference DVD with Lesson Plans & Lab Procedures CE3137 1
DVD 4-Cycle Theory DVD CE3070 1
DVD Theories of Operation I DVD CE3013 1
DVD Theories of Operation II DVD CE3029 1
Specialty Tool Ruler/Air Gap Gauge CE5121 12
Specialty Tool Leakdown Tester 19545 2
Specialty Tool DC Amp Shunt 19468 2
Specialty Tool Alcohol Tester 795161 5
Specialty Tool Basic Tool Kit 19300 5
Training Factory School included with CE9001A Kit purchase --- 1
Note: Red Bold items are considered “consumable” and will need to be replenished on a regular basis. These engines are now equipped with metric fasteners.
CE9001 - AOHV 950 Series™ Kit Parts List
The Overhead Valve Upgrade Module is an excellent way for schools with established air-cooled engine programs to upgrade to more modern components.
12 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
CE9028A - OHV 950 Series™ Engine Upgrade Module
CE9028A is one of our most popular kits similar to the larger CE9001A kit, but without some of the specialty tools and repair manuals.
• Perfect for schools with an existing small engine program
• Helps schools stay up-to-date with current technology
ITEM DESCRIPTION PART # QTY
Engines OHV Engine 130G32-0022-F1 10
Support Parts Engine Gasket Set 594951 13
Support Parts Crankcase Cover Gasket 590608 10
Support Parts Flywheel Key 797286 10
Specialty Tool Flywheel Puller 19203 3
Specialty Tool Flywheel Strap Wrench 19433 3
Specialty Tool Ring Expander 19340 3
Specialty Tool Piston Ring Compressor 19070 3
Repair Manual OHV Single Cylinder 276781 10
PowerPoint CD 4-Cycle Theory CE3017 1
PowerPoint CD Fuel Delivery Systems CE3056 1
DVD OHV 950 Series™ Engine Instructor’s Reference DVD with Lesson Plans & Lab Procedures CE3137 1
Note: Red Bold items are considered “consumable” and will need to be replenished on a regular basis. These engines are now equipped with metric fasteners.
OHV 950 SERIES™ ENGINE INSTRUCTOR’S REFERENCE DVD
CUSTOMER EDUCATION
BRIGGSandSTRATTON.com | ThePowerPortal.com©2014 BRIGGS&STRATTON CORPORATION
CE3137-11/14
ENTRY LEVEL KIT - One of the most widely used engines for walk-behind lawn mower applications.
EETC-2019 CaTalog — 13For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
CE9065 OHV - 725 Series™ Engine Training Kit
CE9065 is designed for schools needing a basic entry-level kit
Intended for smaller class sizes
• Get hands-on experience with vertical shaft lawn mower engines
• CDs, textbook and workbook to help instructors enhance students’ learning experience
9 0 0 0 0
9 7 8 0 8 2 6 9 0 0 3 4 0
ISBN 978-0-8269-0034-0
R. Bruce Radcliff
Rad
cliff
19300 Basic Tool Kit
MS10188 (REV. D)©2016 Briggs & Stratton Corporation
KIT INCLUDES:
19070 Piston Ring Compressor (5 HP & below)19368 Tester - Ignition19433 Flywheel Holder19480 Tang Bender19545 Leakdown Tester19598 Digital Tach & Hourmeter
19619 Flywheel Puller19620 Fuel Line Removal Tool795161 Alcohol Fuel TesterCE5121 Air Gap Gauge .010" (.254 mm)MS-4185 Master Parts Catalog
Note: Each tool part number can also be ordered separately.
19545
MS-4185
19620
19619
19368
19433
795161
19598
CE5121
19070
19480
ITEM DESCRIPTION PART # QTY
Engines Overhead Valve Vertical Shaft Engine 104M02-0021-F1 2
Textbook Small Engines Textbook CE8020 1
Workbook Small Engines Workbook CE8021 1
Answer Key Small Engines Workbook Answer Key CE8022 1
Support Literature Small Engine and Equipment Maintenance CE8155 6
Specialty Tools Basic Tool Kit 19300 1
DVD 4 Cycle Theory CE3070 1
DVD Theories of Operation CE3013 1
CD 725 Series™OHV Vertical Shaft Engine Instructor’s Reference CD CE3140 1
NEW
14 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Used in generator, pressure washer, roto-tiller and other applications.
CE9040A - OHV 950 Series™ Engine Training Kit
CE9040A is also designed for schools needing a basic entry-level kit
Intended for smaller class sizes
• Get hands-on experience with horizontal shaft, overhead valve engines
• DVDs, textbook and workbook, to help instructors enhance students’ learning experience
ITEM DESCRIPTION PART # QTY
Engines OHV Engine 130G32-0022-F1 2
Book Small Engine and Equipment Maintenance CE8155 6
Repair Manual OHV Single Cylinder 276781 6
DVD OHV 950 Series™ Engine Instructor’s Reference DVD with Lesson Plans & Lab Procedures CE3137 1
DVD 4-Cycle Theory DVD CE3070 1
DVD Theories of Operation DVD CE3013 1
Textbook Small Engine Textbook CE8020 1
Workbook Small Engine Workbook CE8021 1
Workbook Answer Key Small Engine Workbook Answer Key CE8022 1
Specialty Tools Basic Tool Kit 19300 1
9 0 0 0 0
9 7 8 0 8 2 6 9 0 0 3 4 0
ISBN 978-0-8269-0034-0
R. Bruce Radcliff
Rad
cliff
OHV 950 SERIES™ ENGINE INSTRUCTOR’S REFERENCE DVD
CUSTOMER EDUCATION
BRIGGSandSTRATTON.com | ThePowerPortal.com©2014 BRIGGS&STRATTON CORPORATION
CE3137-11/14
19300 Basic Tool Kit
MS10188 (REV. D)©2016 Briggs & Stratton Corporation
KIT INCLUDES:
19070 Piston Ring Compressor (5 HP & below)19368 Tester - Ignition19433 Flywheel Holder19480 Tang Bender19545 Leakdown Tester19598 Digital Tach & Hourmeter
19619 Flywheel Puller19620 Fuel Line Removal Tool795161 Alcohol Fuel TesterCE5121 Air Gap Gauge .010" (.254 mm)MS-4185 Master Parts Catalog
Note: Each tool part number can also be ordered separately.
19545
MS-4185
19620
19619
19368
19433
795161
19598
CE5121
19070
19480
EETC-2019 CaTalog — 15For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Engine Replacement Training Kits
CE9041A - OHV 950 Series™Use this kit to economically replace engines in the OHV Engine Training Kit
CE9001A (pg. 6) or supplement other training kits.
OHV 950 SERIES™ ENGINE INSTRUCTOR’S REFERENCE DVD
CUSTOMER EDUCATION
BRIGGSandSTRATTON.com | ThePowerPortal.com©2014 BRIGGS&STRATTON CORPORATION
CE3137-11/14
• Includes instructor’s DVD with daily lesson plans and lab procedures
• Engine photos
• Teardown script
ITEM DESCRIPTION PART # QTY
Engines OHV Engine 130G32-0022-F1 5
DVD OHV 950 Series™ Engine Instructor’s Reference DVD with Lesson Plans & Lab Procedures CE3137 1
CE9066 - OHV 725 Series™This kit can be used for schools that have an existing program for
OHV style engines.
CE9066 enables a school to have a low cost solution to replace worn-out training engines
• Instructor CD to help enhance students’ learning experience
• Includes the worldwide industry standard 725 Series™ engine used on many walk-behind rotary lawn mowers
• Engine photos
ITEM DESCRIPTION PART # QTY
Engines Overhead Valve Vertical Shaft Engine 104M02-0021-F1 5
CD 725 Series™ OHV Vertical Shaft Engine Instructor’s Reference CD CE3140 1
16 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
CE9053A Super-Sized OHV 950 Series™Replace worn-out engines or expand programs so all students have identical
engines to learn the essentials.
OHV 950 SERIES™ ENGINE INSTRUCTOR’S REFERENCE DVD
CUSTOMER EDUCATION
BRIGGSandSTRATTON.com | ThePowerPortal.com©2014 BRIGGS&STRATTON CORPORATION
CE3137-11/14
CE9053A contains 12 OHV horizontal crankshaft engines that are common in tillers, pressure washers and generators. The kit also includes the CE3137 Instructors DVD containing:
• Detailed lesson plans
• Student lab sheets
• PowerPoint of engine disassembly & reassembly
• 4-cycle theory video
• Engine photos for creating your own customized presentation
CE9067 Super-Sized OHV 725 Series™Replace worn-out engines or expand programs so all students
have identical engines to learn the essentials.
CE9067 contains 12 OHV 725 Series™ vertical crankshaft engines; the most popular rotary lawn mower engine in the world. The kit also includes the CE3140 Instructors CD containing:
• PowerPoint of engine disassembly & reassembly
• 4-cycle theory video
• Engine photos for creating your own customized presentation
Engine Replacement Training Kits Continued
ITEM DESCRIPTION PART # QTY
Engines Overhead Valve Vertical Shaft Engine 104M02-0021-F1 12
CD 725 Series™ OHV Vertical Shaft Engine Instructor’s Reference CD CE3140 1
ITEM DESCRIPTION PART # QTY
Engines OHV Engine 130G32-0022-F1 12
DVD OHV 950 Series™ Engine Instructor’s Reference DVD with lesson plans & lab procedures CE3137 1
NEW
The Vanguard™ V-Twin Engine Kit will give you the opportunity to elevate your classroom to an advanced level. It will give your students the chance to discover the working mechanisms of multi-cylinder engines. In addition, they will have the opportunity to understand the refinement of the Vanguard™ brand.
CE9056 is designed to take the more advanced learners to the next level. The V-Twin Engine Kit can give your students a new appreciation of the larger and more powerful engine designs. Get hands-on experience with twin cylinders, pressurized lubrication, electric start and alternators. This kit includes gasket sets, repair manuals and a CD containing:
• PowerPoint engine disassembly and reassembly
• V-Twin teardown script
• V-Twin Model 305447 class outline
• Illustrated Parts List for Model 305447
• Required tool list
• How to look up parts and Operator Manuals
• Oil and fuel recommendations
• And more
Note: Red Bold items are considered “consumable” and will need to be replenished on a regular basis. These engines are now equipped with metric fasteners.
EETC-2019 CaTalog — 17For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
CE9056 - Vanguard™ V-Twin OHV Engine Kit
ITEM DESCRIPTION PART # QTY
Engines Vanguard™ V-Twin OHV Engine 305447-0568-F1 2
Support Parts Gasket Set 841188 4
Repair Manual Vanguard™ V-Twin OHV Repair Manual 272144 4
CD V-Twin Engine Instructor’s Reference CD CE3125 1
18 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Quick Reference Kit Guide
Item Description Part No. CE9001A
CE9028A
CE9040A
CE9041A
CE9053A
CE9056
CE9065
CE9066
CE9067
Engines OHV 725 Series™ 104M02-0021-F1 2 5 12
Engines Vanguard™ V-Twin OHV 305447-0568-F1 2
Engines OHV 950 Series™ 130G32-0022-F1 10 10 2 5 12
Support Parts Engine Gasket Set 594951 10 13
Support Parts Crankcase Cover Gasket 590608 30 10
Support Parts Head Gasket 591445 30
Support Parts Ring Set 592957 4
Support Parts Flywheel Key 797286 20 10
Repair Manual Single Cylinder L-Head 270962 1
Repair Manual Vanguard™ V-Twin OHV 272144 1 4
Repair Manual OHV Single Cylinder 276781 26 10 6
Book Small Engine and Equipment Maintenance CE8155 20 6 6
Textbook Small Engines Textbook CE8020 20 1 1
Workbook Small Engines Workbook CE8021 20 1 1
Workbook Answers Small Engines Workbook Answer Key CE8022 1 1 1
CD V-Twin Engine Instructor’s Reference CE3125 1
DVD Theories of Operation I CE3013 1 1 1
CD Basic Engine Systems CE3017 1 1
DVD Theories of Operation II CE3029 1
CD Model 14 OHV Instructor’s Reference CE3140 1 1 1
CD Fuel Delivery Systems CE3056 1 1
DVD 4-Cycle Theory CE3070 1 1 1
CD L-Head Engine Instructor’s Reference CE3093
DVDOHV 950 Series™ Engine Instructor’s Reference
CE3137 1 1 1 1 1
Specialty Tool Basic Tool Kit (see pg. 33 for complete contents) 19300 5 1 1
Specialty Tool Ruler/Air Gap Gauge CE5121 12
Specialty Tool Ring Compressor 19070 3
Specialty Tool Flywheel Puller 19203 3
Specialty Tool Leakdown Tester 19545 2
Specialty Tool Ring Expander 19340 3
Specialty Tool Flywheel Strap Wrench 19433 3
Specialty Tool DC Amp Shunt 19468 2
Specialty Tool Alcohol Tester 795161 5
Training Vo-Ed Factory School N/A 1
CE8034 – Engine Failure Analysis Book
This 48-page book details the five most common causes of engine failures. A thorough discussion of the “how and why” of each failure along with supporting diagrams and photographs assist the technician in determining engine failures.
CE8069 – Repair Manual 1919-1981 (Antique Repair Manual)
5/00
Service Manual for Out of Production Engines 1919 - 1981
Model 6H Model WM Model FH
Model 300400 Model 6B
Model Z Model P
Motorwheel
Service Manual for Out of Production Engines1919 - 1981
Breaker Point & Magnavac Ignition Systems
Cast Iron Models A’s - ZZ’s, 5’s - 320000’sAluminum Models 6B’s, 8B’s and 60000’s - 253400’s
Milw
au
ke
eW
isc
on
sin
4 Cycle Air-Cooled EngineRepairman’s HandbookThis manual covers all out-of-production Briggs & Stratton Single Cylinder engines built in years 1919-1981. From the original model “A” to model series used in 1981, this book has the specifications, diagrams and instructions necessary to restore your “antique” engine to good-as-new condition.
CE8147 – Cutaway Instruction Guide
CutawayInstruction
Guide
This 88-page book is designed to give any individual looking for basic guidance in making a training prop. The content is limited to a basic approach and requires a clear understanding of hand tools and power tools in a safe and responsible fashion. Your imagination is the only thing that will limit what you can accomplish.
MS2288BK Alternator – Specifications
AlternAtor Specifications
These ring-bound cards supply information on the different alternator systems provided by Briggs & Stratton. An “Introduction” and “How To Use” page is included.
EETC-2019 CaTalog — 19For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Teaching Aid Books & Manuals
270962 – Single Cylinder L-Head Repair Manual
For most single cylinder L-Head engines built after 1981. Our best seller - shop manual contains common specifications and detailed, easy-to-follow instructions on how to adjust, tune up and repair. This 350-page manual is used by Authorized Briggs & Stratton Service Centers.
Used in Training Kits: CE9001A, CE9039, CE9047
20 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
271172 – Twin Cylinder L-Head
For most twin cylinder L-Head engines built after 1981. Manual contains common specifications and detailed, easy-to-follow instructions on how to adjust, tune up and repair. This manual is used by Authorized Briggs & Stratton Service Centers.
272144 – Twin Cylinder OHV Vanguard™
For Vanguard™ V-Twin OHV engines built after 1981. This 190-page manual is dedicated to Vanguard engines. It is used by Authorized Briggs & Stratton Service Centers. It contains specifications and detailed instructions on how to repair and adjust these types of engines.
For Vanguard™ Single Cylinder Engines use Repair Manual 272147.
Used in Training Kits: CE9001A & CE9056
272147 – Single Cylinder OHV Vanguard™
For most single cylinder OHV Vanguard™ engines built after 1981. This 280-page manual is now dedicated to Vanguard engines and is used by Authorized Briggs & Stratton Service Centers. It contains specifications and detailed instructions on how to repair and adjust these types of engines.
For other OHV Single Cylinder Engines use Repair Manual 276781.
Teaching Aid Books & Manuals Continued
273521 – Intek™ V-Twin Cylinder OHV Repair Manual
Repair manual for Intek™ V-Twin overhead valve (OHV) engines. Model series 405700, 406700, 40F700, 40G700, 40H700, 445700 and 446700.
EETC-2019 CaTalog — 21For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
276781 – Single Cylinder OHV Repair Manual
For most single cylinder OHV engines built after 1981. This manual is used by Authorized Briggs & Stratton Service Centers. It contains specifications and detailed instructions on how to repair and adjust this type of engine.
For Vanguard™ Single Cylinder Engines use Repair Manual 272147
Used in Training Kits: CE9001A, CE9028A, CE9040A
276535 – 2-Cycle Snow Engine Repair Manual
2-Cycle Snow Engine Repair Manual
Repair Manuals for otherBriggs & Stratton® Engines, order:CE8069 - Repairman’s Handbook (1919-1981)270962 - Single Cylinder “L” Head (built after 1981)271172 - Twin Cylinder “L” Head276781 - Single Cylinder OHV273521 - Intek™ V-Twin OHV275072 - Micro Engine
BRIGGS & STRATTON CORPORATIONMilwaukee, WI 53201
Part No. 276535-11/05 Printed in U.S.A.www.briggsandstratton.com
®
Quality Starts With A Master Service Technician
Visit us at: www.BRIGGSandSTRATTON.com
Repair manual for 2-cycle R-Tek snow engines.
277527 – 700/750 Series™ DOV® Repair Manual
273521 Twin Cylinder OHV Air-Cooled Engines276781 Single Cylinder OHV Air-Cooled Engines271172 Twin Cylinder L-Head Air-Cooled Engines270962 Single Cylinder L-Head Air-Cooled Engines276535 Two-Cycle Snow EnginesCE8069 Out of Production Engines (1919-1981)
Repair Manuals for other Briggs & Stratton Engines:
Post office box 702Milwaukee, wi 53201 usa©2010 Briggs & Stratton Corporation
BRIGGS&STRATTONcoRPoRatioNPart No. 277527-1/10
Quality Starts With A Master Service Technician
www.thePowerPortal.com (Dealers)
bRiGGsandstRattoN.coM (consumers)
700/750 Series
™ DOV ®
Air-Cooled Engines
Repair manual for Direct Overhead Valve (DOV®) Air-Cooled Engines.
279000 – Single Cylinder OHV Professional Series™ Repair Manual
Post office box 702Milwaukee, wi 53201 usa©2011 Briggs & Stratton Corporation
BRIGGS&STRATTONcoRPoRatioNPart No. 279000 - 3/11
110000/120000 Professional Series™
Single Cylinder Engines
Service, Troubleshooting, and Repair Manual
277527 Single Cylinder DOV ® Air-Cooled Engines
273521 Twin Cylinder OHV Air-Cooled Engines276781 Single Cylinder OHV Air-Cooled Engines271172 Twin Cylinder “L” Head Air-Cooled Engines270962 Single Cylinder “L” Head Air-Cooled Engines276535 Two-Cycle Snow EnginesCE8069 Out of Production Engines (1919-1981)
Repair Manuals for other Briggs & Stratton Engines:
Quality Starts With A Master Service Technician
www.thePowerPortal.com (Dealers)bRiGGsandstRattoN.coM (consumers)
For single cylinder vertical crankshaft Professional Series™ OHV engines built after 1981. This manual is used by Authorized Briggs & Stratton Service Centers. It contains specifications and detailed instructions on how to repair and adjust this type of engine.
22 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
While most of these video programs have been developed for service dealer schools, these programs can also serve the needs of vo-ed students. All video programs are recorded on DVD.
CE3013 – Theories of Operation – Volume 1 DVD
This is a series of four distinct programs (64 minutes total) on a single DVD. These selections cover four basic topics which are vital to understanding the operation of a 4-cycle engine.
1. Carburetor Theory 3. Governor Theory and Troubleshooting
2. Valve Theory and Repair Procedures 4. Electrical System (Alternator Theory)
Used in Training Kits: CE9001A, CE9039, CE9040A
DVDs Theory Programs
CE3029– Theories of Operation – Volume 2 DVD
This serves as a companion video (25+ minutes) to Theories of Operation - Volume 1. It contains the following advanced topics:
1. Horsepower and Torque: explains torque as a rotational force and horsepower as a calculation of work performed.
2. Advanced Carburetion Theory: a brief review of theory and basic carburetor physics followed by state-of-the-art computer animated graphics.
Used in Training Kit: CE9001A
CE3070 – 4-Cycle Theory DVD
This video (6 minutes) is the foundation for understanding how an engine operates and is the cornerstone of a small engine class. Basic 4-cycle theory is described through the use of high-end computer generated graphics. Used in Training Kits: CE9001A, CE9039, CE9040A
CE3097 – Water Pump & Pressure Washer Theory & Troubleshooting DVD
This DVD (42 minutes) is an excellent presentation on the operational theory of water pumps and pressure washers. Various principles of physics, liquids, and creating pressure differentials are explained in making this equipment work. 3-D and animation graphics clearly document the coordination of all the operating systems. The principles of operation and basic equipment troubleshooting is covered in this DVD. Maintenance and parts nomenclature are also included.
EETC-2019 CaTalog — 23For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
CE3109 – Generator Theory Reminder DVD
Electrical energy can be produced from a variety of means. This DVD explains how a portable generator produces power using a brushed (15 minutes) and a brushless (12 minutes) system. Using high-end 3-D graphics, students will learn the induction method of producing power.
In addition, there is also a presentation on the generator market and maintenance (8 minutes). (Use this to educate students on the profit-making opportunities of working on portable generators.)
CE3137 – OHV 950 Series™ Engine Instructor’s Reference DVD
OHV 950 SERIES™ ENGINE INSTRUCTOR’S REFERENCE DVD
CUSTOMER EDUCATION
BRIGGSandSTRATTON.com | ThePowerPortal.com©2014 BRIGGS&STRATTON CORPORATION
CE3137-11/14
The information on this DVD will provide instructors with basic techniques needed to teach small engine technology. There are two methods enclosed for teaching the course curriculum. The first method, developed by a high school teacher with over 30 years of experience, utilizes a complete lesson plan for an 8-9 week class taught at the appropriate level.
The second method can utilize the additional information on this DVD. These materials will be helpful for a class that is giving an overview of small engines, versus a full semester class.
Includes detailed step-by-step teardown script for the new Model 130G00 OHV 950 Series™ horizontal shaft engine.
Used in Training Kits: CE9001A, CE9040A, CE9041A, CE9053A
Contains Daily
Lesson Plans and Lab
Procedures
CE3001 – Maximizing Engine Life Through Preventive Maintenance DVD
The importance of establishing a preventive maintenance program is the primary message of this DVD (35 minutes). Included are explanations of the basic engine maintenance requirements. Implementing a preventive maintenance program assures top power delivery and keeps the equipment more productive over a longer period of time. While the message is geared for equipment operators and owners, anyone learning about small engines can benefit from this important information.
24 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
DVDs – Maintenance & Troubleshooting Programs
CE3091 – Archived Service Information DVD
This video (56 minutes) is a collection of four important service procedures, all on a single DVD.
1. Cylinder Resizing (12 minutes) - In addition to the actual resizing procedure, importance is given to describing the relationship between the cylinder bore and piston rings as well as a discussion on cylinder bore wear.
2. Repairing Rewind Starters (16 minutes) - The classic “3 minute rewind starter repair” is demonstrated in step-by-step detail.
3. 4 HP 2-Cycle Theory of Operation (13 minutes) - The third port loop scavenge design is explored.
4. Electrical Systems: Ignition, Charging & Starting (15 minutes) - Covers basic theory with simple troubleshooting as it relates to Briggs & Stratton electrical systems.
CE3069 – Briggs & Stratton Story DVD
This video (50 minutes) covers the Briggs & Stratton story, history, products and commitment to supporting customers worldwide. Includes two engine plant tours (small and large engines). Show your students how an engine is built!
CE3101 – Electrical Testing - Voltage Drops, Increasing Profit
Learn how to pinpoint a problem in an electrical circuit by using voltage drop testing. Quickly show where a circuit has resistance (defective components, corrosion, etc.) not allowing it to perform properly.
The goal of any servicing dealer is to make a profit by taking care of customers. This video looks at measuring several key variables such as selling, shop time, technician output and margin targets.
EETC-2019 CaTalog — 25For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
CE3113 – Dynamics of Engine Failure DVD
This video (55 minutes) sets the scene with various scenarios of different engine failures. The failures covered are abrasive ingestion, insufficient lubrication, over heating and breakage. The video can be used as a stand-alone presentation on engine failures.
This DVD has an additional PowerPoint presentation on the five common causes of engine failures, all supported by embedded video segments. The failures include abrasive ingestation, insufficient lubrication, over heating, over speeding and breakage. You will be able to show the evidence of the failure and explain how and why it happened.
Also enclosed is a PDF version of our Major Engine Failure Analysis book (CE8034). This book serves as a printed resource for the students to follow using the above presentations
CE3114 – Diagnostics - Volume I DVD
This DVD is a series of videos explaining different diagnostic approaches.
Quick Check Diagnostics, (10 minutes) - A troubleshooting video using a procedure based upon an interview process with a customer. This procedure enables a technician to quickly look at a piece of equipment to help determine what is wrong.
Compression Diagnostics, (38 minutes) - This video enables the student to truly understand 4-cycle theory and the components behind it. Time will also be devoted to performing a 3-angle valve job which enhances engine performance.
Quick Flow Diagnostics, (15 minutes) - After initially troubleshooting a piece of equipment when it comes in, which technician should work on it? This video helps to develop a process on how to quickly and effectively get the piece of equipment through the shop.
Carburetion Diagnostics, (18 minutes) - Why doesn’t the engine start? Or, why does the engine run poorly? This video looks at all of the functions of the carburetor and gives the student a clear understanding of symptoms and what causes them.
All of the above videos are supported with a PDF booklet included on the disk.
CE3017 – Basic Engine Systems
Contains 86 slides of 4-Cycle and 2-Cycle theory – L-Head, Overhead Valve (OHV), Direct Overhead Valve (DOV®) engine designs, governors, compression ratio, compression release systems, rings, cubic inch displacement, lubrication systems and counter balancing systems. Highly recommended for the beginner…it’s the cornerstone of a small engine program.
Used in Training Kits: CE9001A, CE9028A
26 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
PowerPoint Training CDs
CE3056 – Fuel Delivery Systems
Contains 107 slides of basic carburetion systems diagramming common Briggs & Stratton carburetors and fuel pump circuits.
Used in Training Kits: CE9001A, CE9028A
CE3093 – L-Head Vertical Engine Instructor’s Reference
Includes detailed step-by-step teardown script for the popular Briggs & Stratton 625-725 Series™ vertical crankshaft engine, PowerPoint slides, course outline and photo library to create customized slides.
Used in Training Kits: CE9039, CE9047 Contains Daily
Lesson Plans and Lab
Procedures
CE3094 – Overhead Valve (OHV) Engine Instructor’s Reference
Includes a detailed step-by-step teardown script for the Model 12 OHV 900 Series™ horizontal crankshaft engine, PowerPoint slides, course outline and photo library to create customized slides.
Contains Daily
Lesson Plans and Lab
Procedures
CE3095 – Portable Generator Instructor’s Reference
Includes electrical theory, detailed step-by-step teardown scripts for Briggs & Stratton 3500 watt and 4000 watt generators, generator and engine PowerPoint slides, test equipment usage, course outline and photo library to create customized slides.
EETC-2019 CaTalog — 27For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
CE3129 – L-Head Horizontal Engine Instructor’s Reference
> Teardown & Reassembly Presentation
> 4-Cycle Theory Video
> Teardown Script
> Illustrated Parts List
> Owners Manual
> Raw Photos
> 4-Cycle Theory Presentation
CE3129-4/10
Single Cylinder L-Head Horizontal Engine Instructors Guide
BRIGGSandSTRATTON.COMThePowerPortal.com
This CD should automatically start when inserted into a computer.If not, open the “OpenMeFirst.pps” file from Windows Explorer™.
Full Semester of Daily LessonPlans and Lab Procedures
Includes detailed step-by-step teardown script for the Briggs & Stratton Model 9/400 Series™ horizontal crankshaft engine. PowerPoint slides, course outline, and photo library to create customized slides.
Contains Daily
Lesson Plans and Lab
Procedures
CE3125 – V-Twin Engine Instructor’s Reference
Includes detailed step-by-step teardown script for the popular Briggs & Stratton Vanguard™ V-Twin OHV engine, PowerPoint slides, course outline and photo library to create customized slides.
Used in Training Kit: CE9056
CE3140 – 725 Series OHV Vertical Shaft Engine Instructor’s Reference CD
OHV Vertical Shaft Engine725 Series™
BRIGGSandSTRATTON.com | ThePowerPortal.com©2017 BRIGGS&STRATTON CORPORATION
CE3140-1/17
Instructor’s Reference CD
Contains-• Scripted engine teardown
and reassembly• PowerPoint of teardown
and reassembly• Parts list• Tool list• 4-cycle theory video• Literature• More!
Includes scripted engine teardown and reassembly, PowerPoint of teardown and reassembly. Parts list, tool list, 4-cycle theory video, literature and more!
28 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
NHUQM5 - Power Equip. Electrical Training Board
A new innovative and cost-effective approach to teaching
Power Equipment Electronics
Supports and allows the construction of working circuits by demonstrating or replicating experiments in power equipment training curriculum.Will construct over 600+ live working circuits, with
re-usable electronic components.
• Is easy and economical to repair or replace damaged individual components that are generally available locally.
• Stores all of its components in a compact hard case, with labeled compartments for components, making inventory a snap.
• Includes full color manuals and Instructor tools in both hard copy and digitally, together with free internet based upgrades.
• Includes a fully functioning Digital Multimeter.
• Requires no external power supply or power cords. Utilizes AA batteries or Solar panel (included) to work the circuit.
• Has available inexpensive blank carriers, that can easily be customized by you, utilizing your components, to match your immediate training needs.
The EETC Basic Electrical trainer also includes:
• Software (drag and drop), enabling you to construct color circuits, with the actual trainer components, using Microsoft Word. These circuits can then be printed, integrated into job sheets, and/or viewed on an overhead/projector.
• The necessary software and cable to convert a Windows PC, into a basic oscilloscope and construct over 60+ actual working circuits for basic scope training.
• The necessary software and cable to convert a Windows PC into a digital computer programmer and construct basic circuits using a programmable chip and trainer components. These live circuits enable the demonstration, operation, and diagnosis of basic computer circuits and scan tool usage.
Sold Exclusively through Equipment & Engine Training Council Inc.
EETC-2019 CaTalog — 29For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
KNJOUX - Basic Electrical Training Board
Overview:
This innovate training tool from Briggs & Stratton is modeled after a typical riding lawn mower electrical system. It incorporates the starting system, safety system, PTO system and charging system. It’s designed to allow students to construct any of these circuits using jumper wires in any combination to understand series circuits. Also, series circuit rules understanding is allowed to be expanded upon further with a set of 3 small light bulbs which illustrates also how to understand, and test voltage drops. Automotive relay theory, circuits and testing can also be done with these kits.
These boards were developed to train the servicing dealer network and have proved to be a very efficient and useful tool for one of the toughest subjects to get comfortable with. They have also proved to be very robust as well.
What you all get:Aside from the aforementioned kit to make the complete training boards you receive the following items:
• 12V AGM Battery
• Extech DVOM with Amp-Clamp
• 1-amp battery charger (charging system demonstration)
• 8 alligator clip style jumper leads
• Quick connect couplings for battery and charging systems
• Normally Open and Normally Closed Relays
• 10 Ohm resistor and basic diode
• PDF copy of the training work book with release for external duplication (several training lab sessions)
• Power point which mirrors the training work book with user notes included
30 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
TMTAGM - Electronic Fuel Injection Training Board
Overview:
This innovate training tool from Briggs & Stratton features an entire Delphi EFI system, like that found on select Briggs & Stratton Vanguard V-Twin engines. This system features closed-loop oxygen sensor functionality and is in charge of engine fuel delivery and ignition timing advance decisions.
The board contains the entire fuel injection system on a 17”x 22” plastic base laid out in similar fashion to the engine. One of the best features of this board is that it actually runs! Provided is a specialized pulse generator that is plumbed into the harness to simulate the communication between the flywheel reluctor teeth and engine speed sensor. Other functionality includes idle speed of 1850 RPM, top governed speed of 3600 RPM and a hunt-and-surge feature.
One 12V AGM-style battery powers the system and allows complete diagnostic troubleshooting to be performed just like on an actual engine.
These training boards are the same ones used in their hands on half-day and 2-day EFI training classes for our dealers and have been a great success, proven durable and a very efficient way to explain operation, testing and diagnostics of these complex systems.
What you all get:
Aside from the aforementioned kit to make the complete training boards you receive the following items:
• 12V AGM Battery
• Extech DVOM with Amp-Clamp
• Back-Probe leads
• Tiny-Scan Code Reader
• Electronic Technician Assistant Laptop software and cable suite
• Supporting instructor Power Point with user notes
• PDF copy of the training work book with release for external duplication
• Noid Light
• PDF copy of service and diagnostic manual
EETC-2019 CaTalog — 31For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
GNB4K4 - Briggs & Stratton Demonstration Unit
Briggs & Stratton’s clear carburetor is mounted to a shop vac for a great demonstration on carburetor operation and theory. Unit comes as pictured (pictured at right) with very light assembly required.
D2K2JH - Briggs & Stratton Educational Clear Carburetor
• Build your own demonstration unit or use as a model to teach carb theory.
• Item includes (1) Briggs & Stratton Educational Clear Carburetor.
TERMS & CONDITIONSThe clear poly carburetor is a replica of an actual carburetor found on certain Briggs & Stratton engines. This device is to be used for training and demonstration purposes only. For safety and to preserve the clarity of the clear components, do not allow gasoline, other flammable liquids, or solvent-based solutions to enter the carburetor.
DO NOT ATTEMPT TO INSTALL OR OPERATE THIS CARBURETOR ON AN ENGINE
Oregon® Cutter Display Stands Oregon® Chain Segment Models
Oregon® Cutter Display• Stand with 72LPX cutter
• Height: 6 ¼”
• Length: 8”
• Width: 3 ¼”
These 7X scale models are available in our popular .325” pitch 21LPX chain and 3/8” pitch 72LGX chain as well as the Oregon® PowerSharp® 5X scale model. These are great training aides for demonstrating the working parts of a length of saw chain and how the components interact. Each comes with a heavy-duty case for storage.
551655 - 72LPX Cutter 551656 - 21LPX Chain Model (7X scale)
551654 - 72V Cutter 551656 - 72LGX Chain Model (7X scale)
551658 - Oregon® PowerSharp® Chain Model (5X scale)
32 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
ECHO - 2-Stroke Engine Training Kit
* Developed for student education
* PowerPoint presentation with engaging videos and animations
* Make 2-Stroke Engine Theory & Failure Analysis Easy to Teach
* Kit Includes Qty. 8 GT-225 Curved Shaft Trimmers * All inclusive kit provides tools and
replacement parts
* Step-by-step tear down and assembly
* Access to Business Portal & Online Training Courses
* 24 Laminated Evaluation Guides & Failure Analysis Reports
Equipment & Engine Training Council
8 GT-225
Trimmers
EETC-2019 CaTalog — 33For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
WHOLE GOODSPart Number Description QTY
GT-225-2A Grass Trimmer 21.2cc 8
TRAINING AIDS99922201930 Failure Analysis Textbook 24
99922204420 Engine Evaluation Guide 24
99922201524 Failure Analysis Report 24
PowerPoint 2-Stroke Basic 1
PowerPoint 2-Stroke Diagnostics 1
PowerPoint 2-Stroke Theory 1
PowerPoint GT-225 Teardown 1
SERVICE PARTSGasket Kit 24
Piston Pin Clips 24
Piston Ring 24
RB-K93 Carburetor 1
Carburetor Rebuild Kit 12
Limiter Cap 100
Air Filter Kit 4
Crankshaft Seal 10
Starter Assy 2
30 x 700mm Starter Rope 3
Spark Plug - BPMR8Y 10
Fuel Line Kit 12
Fuel Cap Assy 6
Starter Recoil Spring 3
Spark Plug Terminal 10
Spark Plug Boot 10
Ground Lead 4
Ignition Lead 4
Fuel Line Clamp 25
Throttle Return Spring 2
SERVICE TOOLSDescription QTY
Limiter Cap Remover Kit 4
Carb Adj. Screwdriver 4
Zama Metering Gauge 4
2-Pin Wrench 4
14mm Pressure Test Plug 4
Pressure Vacuum Pump 4
Compression Gauge 4
PET-4000 Ignition Tester 4
PET-304 Tachometer 4
Ignition Air Gap Gauge 4
Rubber Block off Trapezoid 8
Piston Pin Tool 1
Piston Holder 4
Flywheel Remover Kit 4
T-27 Torx T-Handle 4
34 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
ECHO - Tools Fuel System / Carburetor Tools
LED Inspection Light
C3000007
High intensity ultra bright .5 W LED up to 15 lumens, uses 4, LR 44 batteries. (batteries included with light)
Carburetor Adjustment Screwdriver
91027 2.5mm Tip
Ethanol Tester
Checks ethanol percentages between 0% & 90%.
91150
Zama Metering Gauge
91021Walbro Metering Gauge
89790000001Works with carburetor models: WB, WS, SDC, WTA, WA, WT, MDC, HDA, HDB, HDC, WY, WZ, WYJ, WYK, WYM, WGA, WJ, WG, WLA, WYL, WYP
91158Works with carburetor models:
WTB, WLB, WYE, WYB, WYLA, WYC, WYLB, AT, WLC, WTE, WTEA, WTF,
WYD, WYG, WYGA and SPIRAL
Soft Touch Adjustment Screwdriver
91049 3.5mm Tip
Walbro Welch Plug Tool Kit
500500
Removes and installs welch plugs on Walbro carburetors.
EETC-2019 CaTalog — 35For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Crankcase/Compression Testing Tools
Compression Release Valve Plug
91155Compression Relief Valve test plug. Used when pressure testing 60cc chain saws crankcases. Includes plug and 4 washers.91153 --10 pack copper compression washers
Pressure/Vacuum Pump
91149Used for pressure and vacuum testing cylinder and crankcases. Includes 91121
14mm Pressure Test Plug
91018Fits 14mm spark plug hole.
Sparkstar Ignition Checker
PET4100BIndicates presence of ignition. Can beused on all engines utilizing spark ignition
10mm Pressure Test Plug
91081
Fits 10mm Spark Plug Hole.
Hose Adaptor
91121 Replacement Hose Adaptor.
Standard Pressure Tester
89780330133Used for pressure testing crankcases and carburetors.
Rubber Block Off Plate
91041Used behind the carburetor and muffler to seal the crank case for pressure testing.
A B
Premium Quality Compression Gauge
91147Designed specifically for hand held power equipment. Fits both 10mm and 14mm spark plug holes. Includes 91151 and 91143
A 91151 10mm AdaptorB 91143 Replacement Hose
without 10mm adaptor
Threebond Liquid Gasket 1207D
X686000000Threebond 1207D is high temperature / high viscosity sealer intended for assembling components with a large surface area without the use of a gasket.
36 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
ECHO - Ignition/Tachometer Testing Tools
PET-9000 Ignition Analyzer
900300Features:
• Allows testing of ignition systems at idle to full engine rpm.
• Displays ignition timing in real time, with minimum, maximum, timing lock feature
• Compatible with analog and digital TCI, CDI ignition systems with fixed, step or slope ignition advancing systems.
• Verifies electronic Rev-limiter functions on units using an ignition timing retard circuit.
• Displays real time primary circuit voltage of running engine.
• Contains solar powered digital tachometer/clock combination with battery backup.
• Contains internal adjustable gap3-point Kilovolt output tester.
PET-4000 Spark Checker
PET4000ECUsed to check ignition output.
PET 1000R
89780233331 PET 1000R For 2-stroke 1 and 2 cylinder engines 4-stroke 2 and 4 cylinder engines. Will work on most 4-stroke 1 cylinder engines.
PET 1100R
89780233531For 2 Stroke 1,2,3,4 cylinder engines, and 4 Stroke 1,2,3,4,5,6, and 8 cylinder engines.
PET 304 Tachometer/Hour Meter
G310000050Tachometer/hour meter, records rpm and total engine running time. Well suited for measuring rpm on new technology Hybrid 4 enginesSuitable for:2-Stroke single cylinder engines4-Stroke single cylinder enginesRange 100-30,000 RPMAccuracy +/- 10 RPM
Long Reach Piston Stop
89753730130Longer version of 91017.Fits 14mm threads.
Ignition Air Gap Gauge
91004Sets clearance between ignition module and flywheel. Applicable for most ECHO and Shindaiwa models.
Piston Support/Connecting Rod Holder
91101Used to support the piston during removal.
EETC-2019 CaTalog — 37For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
Piston Stop
91017Used to prevent flywheel from moving during service procedures such as removing the flywheel.Fits 14mm threads.
Piston Pin Tool
Y089000250Used for Shindaiwa models.
Piston Pin Tool
89770230131Used to remove the piston wrist pin.
Multi Purpose 2 Pin Wrench
91114Used to remove starter pawls and clutches
91126
91087
Flywheel Remover Kit
91122This is used to remove the fan and or flywheel on most models. The kit Includes 91087 fan/flywheel tool for large blowers, and 91126 adaptor kit. The adaptor kit is used with 91087 to remove flywheels on most models. 91087 and 91126 are available separately.
91128--M8 x 1.25: Most ECHO Hedge Clippers and SRM series
91129--M8 x 1.0: HC-165
91130--M8 x 1.0: CS-370/400, EB802, EB854, T242
91131--LM6 x 1.0: HT232
Flywheel Puller
91134Used to remove the flywheel on ECHO models.
ECHO Chain Saw Clutch Tool
91152Used to remove the clutch on ECHO CS-500P/Shindaiwa 488/502
Clutch Tool
89750516133Used to remove the clutch on most larger chain saws.
Clutch Tool
X640000011Used to remove the clutch on mostsmaller chain saws.
ECHO - Clutch & Flywheel Tools
38 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
KIT INCLUDES:
19070 Piston Ring Compressor (5 HP & below)
19368 Tester - Ignition
19433 Flywheel Strap Wrench
19480 Tang Bender
19545 Leakdown Tester
19598 Digital Tach & Hourmeter
19619 Flywheel Puller
19620 Fuel Line Removal Tool
795161 Alcohol Fuel Tester
CE5121 Air Gap Gauge .010” (.254 mm)
MS-4185 Master Parts Catalog
Note: Each tool part number can also be ordered separately.
Briggs & Stratton Specialty Tools
19300 Basic Tool Kit
EETC-2019 CaTalog — 39For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
19368 Ignition Tester
Designed to simulate true engine ignition resistance and system capabilities under safe test conditions.
19461 Primer Bulb Removal Tool
For quick and easy removal of primer bulb and retainer on engines equipped with primer bulb system.
19462 Primer Bulb Installation Tool
Installs new primer bulb and retainer in a “snap.”
19468 DC Amp Shunt
Used to measure amperage in a 12 volt system. Color-coded receptacles hold digital multimeter leads securely while testing. This tool works with any digital multimeter with a millivolt scale. Eliminates blowing the fuse in multimeters, due to high current loads such as charging and starting.
19545 Leakdown Tester
Used to test the sealing capabilities of the compression components of all engines. Comes with crankshaft clamp.
19602 Digital Meter
Meter features the ability to test for AC or DC voltage, resistance (Ohm’s), capacitance, diode function, temperature. Incorporates clamp for easy measurement of amperage. (Reads up to 400 amps AC or DC)
19607 Otoscope
The Otoscope allows the technician to see into small passages and jetting of carburetors at 2x magnification.
19608 T40 Plus Torx® Bit
This Plus Torx® bit design is to be used for the Model 31 & 33 rod bolts. If the technician tries using a standard T40 Torx bit on these rod bolts, they will have a real potential of stripping the head of the bolt.
19620 Fuel Line Removal Tool
This tool is essentially a pry bar for removing fuel line from barbed fittings. The bar is carefully formed, machined, hardened and plated to ensure a long life. To use, remove fuel line clamps. Push fork at end of tool behind the end of the fuel line. Carefully leverage the tool against some existing engine component as a fulcrum and pry fuel line from fitting. Use caution to prevent damage to linkage or fuel system controls. Inspect all removed fuel lines for damage or hardening and replace as necessary.
795161 Alcohol Tester
Marked with alcohol content lines at 10%, 20%, 70% and 85%. This provides the technician with visual cues as to the alcohol content in gasoline.
CE5005 SAE & Metric Equivalence Stainless Steel Scale -
(10 per bag)
This tool is almost a requirement for the shirt pocket of any technician. Made of flexible stainless steel, this SAE & Metric Equivalence Scale is equipped with a T-square/pocket clip that functions as a depth gauge. One side of the scale is metric and displays millimeters. The other side is graduated in inches and displays 64ths. The reverse side features a handy decimal equivalent chart.
Briggs & Stratton Specialty Tools Continued
40 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
Ultrasonic Carburetor Cleaners
DTI-UC1.5G
Product Overview
Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signals in fluid. Microscopic bubbles are formed, and they implode violently causing the cavitation which creates an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Features
• 2.5 Liter and 1.5 Gallon Heated Tank Models
• Adjustable LED digitally controlled thermostat.
• Stainless steel tank and housing construction.
• Adjustable LED digital countdown timer.
• Six month warranty.
DTI-UC2/3G
EETC-2019 CaTalog — 41For prices and ordering, go to EETC’s Online Store at www.eetc.org
Equipment & Engine Training Council
CM-960 Greenlee
CLAMPMETER, AC/DC
• Measures AC+DC current
• AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives
• Also measures DC voltage, resistance, capacitance and frequency
• Tests continuity and diodes
• Peak-RMS measures motor inrush current
• Backlight & relative mode for added versatility
• AmpTip™ increases accuracy on small wires and low current
• Two voltage detection modes - non-contact or using a single test lead
• Data hold
• Recording of Maximum, Minimum, and Average readings
• Lifetime warranty
DM-210A Greenlee
Multimeter
• Measures voltage, current, resistance and frequency
• Tests continuity and diodes
• Backlit LCD with 6,000 count display
• Two voltage detection modes - non-contact or using a single test lead
• BeepJack warns when test leads are incorrectly inserted in current measurement terminals
• Automatic and manual range selection
• Relative offset mode to see changes in measurements
• Data hold
• Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging
• Lifetime Limited Warranty
• Accessories included: (2)1.5V AAA batteries, bead temperature probe (DM-210A, DM-510A only, 400°F/204°C max), test leads, protective boot
• Measures capacitance
• Measures temperature using a type K thermocouple
DM-45 & 65
Greenlee Multimeter
• Large, easy-to-read displays
• Lifetime warranty
• Feature packed
• Replaceable fuses for easy field repair
• Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters
PDMM-20 Pocket Multimeter
• Auto-Select Mode for hassle-free use
• Low impedance eliminates stray or “ghost” voltage readings
• AC/DC voltage measurement
• Hassle-Free, automatic measurement of voltage and resistance
• Autoranging for quick, convenient measurements
• Non-contact voltage detection for identifying live lines without contacting conductors
• Intelligent Auto-Off for longer battery life
• Low battery indicator
• Resistance measurement
• Audible continuity test
• Frequency measurement in voltage mode
• Capacitance meausurement
• 6000-Count LCD for high resolution
• Accessories Included: (1)3 V Battery (CR2032), Carrying Case
• Lifetime Limited Warranty
Greenlee Multimeters
42 — EETC2019 CaTalogFor prices and ordering, go to EETC’s Online Store at www.eetc.org.
3548SLS WorkBench
36– x 48– Top
3548SLL WorkBench
36– x 60– Top
NC3-COE -
(1) 3548SLS WorkBench,
(1) Wilton Vise,
(2) Greenlee Stools
• Heavy duty, wooden work surface
• Extra shelf storage for more organization of items
• Recessed and concealed lock protector inhibits forced entry and corrosion to lock
• Flush-mounted doors
• Finger-groove door handles
• Front door storage
• Hemmed (reinforced) high-strength shelves
• Continuous, non-removable hinge pins to prevent theft
• Angled handle recess to prevent pinch points
• Patented, ergonomically designed fold-down recessed handles
• Recommend #1 and #5 Masterlock padlocks or equivalent
• Angled 3-1/2” high support skids for easy caster installation with carriage bolts
• Optional 5” Wilton Vise PN# 07217 (not included)
• Optional Casters PN# 703 (not included)
• Optional Greenlee Stools (not included)
• Some assembly required
Specifications
• Capacity : 20.000 CU-FT
• Dimensions : 33.620 IN Height X 48.000 IN Width X 24.000 IN Depth
• Includes (1) of the following:
• 36 IN X 48 IN X 1.75 IN Wooden top with pre-drilled holes and hardware
• 36 IN X 60 IN X 1.75 IN Wooden top with pre-drilled holes and hardware
• Weight : 377lbs (weigh specified is Workbench and Top Only)
CASTER SET (703)• Caster bolt pattern 2-7/8 IN x
3-1/4 IN
• Polyolefin-injected molded hard casters
• Stain-resistant,
• Chemical-resistant
• Non-marking
Specifications
• Capacity : 2000.000 LB (907.000 KG)
• Caster Bolt Pattern : 2-7/8 IN X 3-1/4 IN
• Includes : (16) 3/8-16 X 1 IN Self-Threading Mounting Screws
• Ship Weight : 22.000 LB (10.000 KG)
• Type : 2 Rigid, 2 Locking Swivel Casters
• Wheel Diameter : 6.000 IN (152.000 MM)
• Wheel Tread : 2.000 IN (51.000 MM)
Greenlee WorkBench
DIMENSIONS DEPTH WIDTH HEIGHT WEIGHT
WORKBENCH 24” 48” 34” 273 lb
SMALL TOP 36” 48” 1.75” 84 lb
LARGE TOP 36” 60” 1.75” 105 lb
SPECIFICATIONS
Wilton® 5” Vise for a stable and secure hold (vise not included)
Maximum security against drilling or cutting lock
Maple wood butcher block top available in two sizes: 36”x 48” or 36”x 60”
Textured powder coated 16-gauge steel manufactured in Louisville, KY
Four shelves give sturdy tool organization
Add casters for mobility (casters not included)
Equipment & Engine Training Council
CATALOG Equipment & Engine Training Council
Equipment & Engine Training Council344 Oak Grove Rd Kings Mountain, NC 28086
P: 1-888-406-1810 • F: 1-803-250-3632 • Email: [email protected] • www.eetc.org
Free Individual Site Membership(Full access to Technician Portal requires a pay membership)
Enjoy many Member Only benefits:Search latest Job Posting
Post Your ResumeCheck out episodes of Hector's Shop
Technician Portal Access
On-line www.eetc.org
Equipment & Engine Training Council