Watch Movement Specification and Drawing

CALENDAR

Cal. AL33A

Movement Size

Casing Diameter

Height

Battery Life

10 1/2’’’

Ø 23.3mm

4.15mm

2 years

Date: 28/Jul./'16

Cal. AL33AItems Rev. Page

Specifications 03 1Appearance 01 2Casing 02 3Hand fitting 01 4Hand setting stem 03 5Dial-01 01 6-01Dial-02 01 6-02Dial-03 01 6-03Dial-04 01 6-04Dial-05 01 6-05Dial-06 01 6-06Dial-08 01 6-08Dial-09 01 6-09Dial-10 01 6-10Dial-11 01 6-11Dial-12 01 6-12Dial-13 01 6-13Dial-14 01 6-14Dial-15 01 6-15Dial-16 01 6-16Dial-17 01 6-17Dial-18 01 6-18Dial-19 00 6-19Casing ring 03 7

Date :

1. MOVEMENT DIMENSIONSOutside diameter φ23.70mm × 22.00mm(3-9H) × 22.60mm(12-6H)Casing diameter φ23.00mmTotal height 4.15mm (including battery)

2. TIME STANDARDType of quartz oscillator Tuning forkFrequency of quartz oscillator 32,768 HzAccuracy ±20 seconds per month (on wrist)Operating temperature range －5℃ to ＋50℃Regulation device Nil (Pre-adjusted)

3. INDICATOR / FUNCTIONS3 Hands Hour / Minute / SecondDay / Date Instant setting device for day / date calendarReset switchSetting mechanism Crown at normal position : Free

Crown pulled out 1st click : Instant day / date changeCrown pulled out 2nd click : Time setting / Reset

4. FEATURESJewels 0 JewelsAnti-magnetism Over 1600A/m (Direct current magnetic field)Maximum unbalance of hands Second hand : 0.06μN・m

Minute hand : 0.6μN・mHour hand : 0.5μN・m

5. BATTERY Type / Size Silver oxide battery /φ6.8mm × t 2.6mmRecommended battery SR626SWNominal voltage 1.55 VBattery life Approx. 2 yearsDriving current consumption Approx. 1.5μAOperation stopping voltage 1.1 V

6. SEPARATED PARTS (Parts code)Hand setting stem 0351177 or 0351578Battery SR626SW

7. TEST OF ACCURACYEquipment to be used SEIKO quartz tester QT-99,

Greiner quartz timer-C , Witschi Q-tester 4000Duration of measurement 10 secondsMicrophone to be used Electromagnetic detection type

All specifications are subject to change without notice.

Cal.

Analog Quartz 10 1/2''' Calendar Series Movement / Three Hands(H/M/S) with Day / Date

AL33A Rev. : 03

20/Oct./'14Specifications

P. 1