eproc.punjab.gov.pkeproc.punjab.gov.pk/biddingdocuments/80238_dnit.pdf20 providing , laying watering...

LAHORE COLLEGE FOR WOMEN UNIVERSITY (LCWU), LAHORE.

CONSTRUCTION OF STUDENT SERVICE CENTRE

ENGINEER,S COST ESTIMATE

SUMMARY OF COST

A SCHEDULE ITEMS

CIVIL WORKS Rs 57,263,570.00

PUBLIC HEALTH WORKS Rs 860,641.00

SUB-TOTAL

58,124,211.00

Rate quoted % above or below:_____________

__________________

SUB-TOTAL "A"

__________________

B NON-SCHEDULE ITEMS

CIVIL WORKS Rs __________________

PUBLIC HEALTH WORKS Rs __________________

SWIMMING POOL EQUIPMENT Rs __________________

ELECTRICAL WORKS Rs __________________

SUB-TOTAL "B"

__________________

Grand Total (A+B) Rs.

__________________


CONSTRUCTION OF STUDENT SERVICE CENTER

ENGINEERS ESTIMATE

CIVIL WORKS (SCHEDULE ITEMS )

Sr. No

DESCRIPTION

QUANTITY

UNIT RATE AMOUNT (MRS) 1ST Biannual

2017 LHR.

(1) (2) (3) (4) (5) (6) (7)

Earth Work

1 Excavation in foundation ,bridges and other structures, including dagbelling ,dressing ,refilling around structure with excavated earth ,watering and ramming lead up to one chain (30 m) and lift up to 5 ft.(1.5 m).

- in Ordinary Soil.

C-3-P-30 -I-21 (b)

i) 0.0' to 5.00' depth. 59,879

%0CFT

6,130.10

367,064.26

ii) 5.0' to 10.00' depth. 40,992

%0CFT

9,614.88

394,133.16

iii) 10.0' to 15.00' depth.

2,705 %0CF

T

11,938.0

8 32,292.51

2 Compaction of earthwork (soft, ordinary or hard soil) :-

a) Mixing, moistening earth to optimum moisture content in layers for compaction, etc. complete

103,576

%0CFT

701.70

72,679.28

C-3-P-30 -I-24

C O N C R E T E

3 Providing and laying reinforced cement concrete (including prestressed concrete), using coarse sand (Lawrancepur) and screened graded, washed aggregate, in required shape and design, including forms, moulds, shuttering, fitting, compacting, curing, rendering and finishing exposed surface, complete (but excluding the cost of steel reinforcement, its fabrication and placing in position etc.).

a) Reinforced cement concrete in slab of rafts/strip foundation, base slab of column and retaining walls; etc., using coarse sand (Lawrancepur) and other structural members other than those mentioned in 5(a) (i) above not requiring form work (i.e. horizental shuttering) complete in all respects:-

C-6-P-42 -

I-6aii(2)

i) (2) Type B (Nominal mix 1: 1½: 3) CFT

12,184 275.60 3,357,910.40

b) Reinforced cement concrete in roof slab, beams, columns, girders and other structural members laid in situ or precast laid in position, or prestressed members cast in situ, complete in all respects:-

C-6-P-42 -

I-6ai (2)

(2) Type B (nominal mix 1: 1½: 3)

i) Ground Floor 13,475 CFT

368.00

4,958,800.00

ii) First Floor 9,641 CFT

368.00

3,547,888.00

iii) Second Floor - CFT

368.00 -

iv) Third floor - CFT

368.00 -

v) Fourth Floor 888 CFT

368.00

326,784.00

c) (1) Type A (nominal mix 1:1:2) For Columns, Retaining walls & W/T.

C-6-P-42 - I-6ai (1)

i) Ground Floor 2,666 CFT

422.15

1,125,451.90

ii) First Floor 1,333 CFT

422.15

562,725.95

iii) Second Floor - CFT

422.15 -

iv) Third floor - CFT

422.15 -

v) Fourth Floor 1,101 CFT

422.15

464,787.15

d) Extra Labor for concrete in 2nd & Subsequent story.

C-6-P-42 - I-6(d)

i) First Floor 10,974 CFT

21.80

239,233.20

ii) Second Floor - CFT

43.60 -

iii) Third floor - CFT

65.40 -

iv) Fourth Floor 1,101 CFT

87.20

96,007.20

e) Type C Nominal: mix 1:2:4

C-6-P-42 - I-6ai(3C)

i) Slab on Grade 5,123 CFT

338.90

1,736,184.70

ii) Lintel 400 CFT

338.90

135,560.00

iii) Parapet wall 759 CFT

338.90

257,225.10

5 Supply and Fabrication of mild steel reinforcement for cement concrete, including cutting bending ,laying in position ,making joints and fastening ,including cost of binding wire and labor charges for binding of steel reinforcement (also includes removal of rust)

MS Deformed bars Minimum tensile

Strength 40,000 psi. 19,300 100 Kg

9,980.20

1,926,178.60

C-6-P-43 -I-9 (b)

MS Deformed bars Minimum tensile

Strength 60,000 psi. 140,000 100 Kg

10,435.0

0

14,609,000.00

C-6-P-43 -I-9 (c)

6 Cement concrete plain including placing, compacting, finishing and curing complete (including screening and washing of stone aggregate): Ratio 1: 4: 8

Under Footing

4,638 %CFT

16,092.6

0 746,374.79

C-6-P-41 -I-5 (i)

Under FLoor

5,042 %CFT

16,092.6

0 811,388.89

C-6-P-41 -I-5 (i)

7 Bitumen coating to plastered or cement concrete surface:-

ii) 14 lbs. per 100 Sft. (6.35 Kg per Sq.m) 10,074 %Sft

552.35

55,643.74

C-13-P-87 -I-9(2)

8 Providing embeding 10" (250 mm) wide ¼" (6 mm) thick rubber water stopper in expansion joints of R.C.C. roof slab complete in all respects.

390 Rft.

68.65 26,773.50

C-6-P-46 -I-28

9 Providing and laying Damp Proof course of cement concrete 1:2:4 (using cement sand and shingle including bitumen coating

With one coat of bitumen and one layer of polythene sheet 500 gauge. i) 1½" thick (40 mm) 1,326 %Sft

4,295.80

56,962.31

C-6-P-47 - I-33 a (i)

10 Providing and laying Vertical Damp Proof course of cement sand plaster and bitumen coating

Ratio 1:3 thick 3/4"

975 %Sft

3,138.45 30,599.89

C-6-P-47 - I-34(ii) b

B R I C K W O R K

11 Pacca brick work in foundation and plinth in cement sand mortar - Ratio 1:5

6,299 %CFT

19,877.9

0 1,252,108.92

C-7-P-51 - I-4 (i)

12 Pacca brick work in ground with cement sand mortar ' - Ratio 1:5

25,409 %CFT

21,079.1

0 5,355,988.52

C-7-P-52 - I-5 (i)

13 Extra Labor for brick work in. C-7-P-52 - I-6

First Floor 8,835 %CFT

745.80

65,891.43 (i)

Second Floor - %CFT

1,656.60 - (ii)

Third floor - %CFT

2,567.40 - (iii)

Mumty 284 %CFT

4,098.60

11,640.02 (iii)

14 First class brick walling laid in 1:3 cement sand mortar,reinforced with 1" (25 mm) wide 18 gauge hoop iron:-

4½" (113 mm) thick walling with hoop iron, bonding 6" (150 mm) apart.

C-7-P-55 - I-21 (i)

Ground Floor 5,020 %Sft

9,770.40

490,474.08

First Floor 4,462 %Sft

9,770.40

435,955.25

Second Floor - %Sft

9,770.40 -

Third floor - %Sft

9,770.40 -

15 Perforated pacca brick walling one brick thick, in ground floor: Ratio 1:3

2,456 %Sft

12,402.6

5 304,609.08

C-7-P-54 - I-18 (ii)

16 Add extra labour above item for perforated pacca brick C-7-P-53 - I-9


559.35

7,170.87

17 Extra cost of labour and material for red oxide pigment in cement pointing to match with the colour of bricks. 2,456 %Sft

288.60

7,088.02

C-11-P-74 - I-31

18 Extra for lime, mud or cement plaster and pointing from 20' (6.00 m) and above for each additional 10' (3.00 m) height or part thereof.

C-11-P-74 - I-

28


205.55

2,635.15

FLOORING

19 Supplying and filling sand under floor ,or plugging in wells.

11,169 %CFT

1,562.00

174,459.78

C-7-P-55 - I-30

20 Providing , laying watering and ramming brick ballast 1 1/2" to 2" (40mm to 50mm) gauge mixed with 25% sand .for floor foundation complete in all respect.

C-10-P-66 - I-

3

Ground Floor 3,264 %CFT

4,395.85

143,480.54

First Floor 3,175 %CFT

4,395.85

139,568.24

Second Floor - %CFT

4,395.85 -

Third floor - %CFT

4,395.85 -

21 Cement concrete plain including placing compaction finishing & curing. 2" thick Ratio 1:2:4 4,495 %CFT

20,849.4

0 937,180.53

C-6-P-42 - I-5 (f)

22 Extra labour for laying concrete plain or reinforced:

C-6-P-44 - I-13

(a) above 20' (6 m) upto 40'(12 m) height

428 %CFT

2,323.20 9,943.30

(b) for every additional 10'(3 m) height.

428 %CFT

3,775.20 16,157.86

23 Providing and laying floor of mosaic marble chips tiles 1"(25 mm) thick of approved quality and shade, laid in white cement and pigment, over ¾"(20 mm) thick bedding of cement sand mortar 1:2, including finishing and polishing, complete.

2,862 %SFT

7,973.80 228,210.16

C-10-P-68 - I-23

24 Extra labour for each storey above ground, for mosaic,conglomerate, tiles, stone and wooden floor.

C-10-P-67 - I-18

First Floor 1,827 %SFT

435.60

7,958.41

25 Shisham wood boarding or strip flooring 3/4" (20mm) thick (sawn to required size) tongued and grooved or splayed rebated fixed with brass screws on deodar wood battens 1½ "x2"(40 x 50 mm),size placed at 12"(300 mm) centre to centre, including two coats of bitumen laid hot on thebase.

1,311 %SFT

38,622.3

5 506,339.01

C-10-P-69 - I-29

26 Brick on edge flooring, laid in 1:6 cement mortar, over a bed of ¾" (20 mm) thick cement mortar 1:6. 9,900 %SFT

8,566.65

848,098.35

C-10-P-66 - I-9

27 Providing and laying conglomerate flooring (two coat work) with top layer of ½"(13mm) thick wearing surface,consisting of one part of cement and 2 parts of stone chips passing 3/16"(6 mm) sieve, over bottom layer of cement concrete 1:3:6, including surface finishing and dividing in panels:-

(c) 2"(50 mm) thick

300 %SFT

5,013.50 15,040.50

C-10-P-67 - I-16c

SURFACE RENDERING

28 Cement plaster 1:5 upto 20' (6.00 mm) height:-

C-10-P-72 -I-

11

½" (13 mm) thick 41,967 %SFT

1,662.85

697,848.26 (b)

¾" (20 mm) thick 41,967 %SFT

2,255.30

946,481.75 (c)

29 Cement plaster 3/8" (10mm) thick under soffit of R C C roof slab only up to 20' height.

Ratio (1:3) 25,030 %SFT

1,975.00

494,342.50

C-10-P-72 -I-10

30 Extra for plaster works from 20 feet above each 10 feet height

From 20' to 30' height or part thereof 32,869 %SFT

224.40

73,758.04

C-10-P-72 -I-28


448.80

40,831.82

From 40' to 50' height or part thereof - %SFT

673.20 -

WOOD WORK & ALUMINUM JOINERY

31 Providing and fixing all types of partly fixed and partly openable glazed anodised bronze colour aluminium doors, using delux section of M/s Al-Cop or Pakistan Cables, having chowkat frame of size 40 x 100 mm (1½" x4") and leaf frame of 60x40mm (2½"x1½") wide sections including the cost of ¼" (5 mm) thick imported tinted sections are of dull aluminimum glass with aluminium triangular gola and rubber gasket to support the glass and leaf edging, using approved standard fittings, locks, 3" (75 mm) wide long handles etc., and hardware any required as approved by the engineer in-charge. (used 2mm section)

1,160 Per Sft

578.25 670,770.00

C-25-P-158 -I-51

32 Providing and fixing all types of glazed aluminium windows of anodized champagne colour partly fixed and party sliding using deluxe section of approved manufacturer having Frame of size100mmx30mm using frame at bottom,at top and side leaf leaf frame sections of 60mmx23mm at top & bottom and size 45mmx25mm at center and size45mmx25mm at sides, Jali leaf frame size 43mm x13mm i/c fine quality aluminum jali, 5mm thick imported tinted glass with rubber gasket using approved standard latches, wheel, stopper, brush chennel angle joint and hardware etc.complete in all respect. (b) 2 mm thick

3,466 Per Sft

754.15 2,613,883.90

C-25-P-158 - I-53 (b)

33 Providing and fixing 1½" (40mm) thick solid flush door shutter (Approved Factory Manufactured) with commercial ply (5 mm thick) on both sides double pressed and deodar wood lipping 1½"x3/8" (40mm x 10mm) around shutter including chromium plated fitting, iron hinges with aluminium kick plate 22 SWG on both sides & finger plate complete in all respect.

1,666 Per Sft

359.90 599,593.40

C-12-P-83 -I-50

34 Providing and fixing deodar wood dolly frame having 1½"x1½" (40 x 40 mm) vertical and horizontal double post with 1½"x1½" (40 x 40 mm) full width of james braces at 12" (300 mm) including filling of the spaces in between braces with 1:3:6 PCC fixing ply of approved quality including holdfasts complete in all respects.b) With commercial ply

720 Per Sft

365.60 263,232.00

C-12-P-84 -I-57 (b)

35 Providing and fixing wooden moulding stopper 2½"x5/8" (63 x 16 mm) on door frame fitted with ply of approved quality complete in all respects. b) Deodar wood moulding

1,666 Per Sft

75.35 125,533.10

C-12-P-84 -I-56 (b)

36 Providing and fixing ornamental wooden architrave 3" x (1½" tapered to ¼") all along the door frame complete in all respect.

b) Deodar wood architrave 762 Per Sft

44.40

33,832.80

C-12-P-84 -I-58

37 Providing and fixing sliding bolt to doors:-

iv) brass sliding bolt, 12" (300 mm) long

86 EACH

337.75 29,046.50

C-12-P-78 I-18 (iv)

38 Providing and fixing, approved quality mortice lock. 86 EACH

534.55

45,971.30

C-12-P-78 I-21

39 Providing and fixing Vin board cabinet 3/4" thick with drawers 3"deep in 'Kitchen including termite proofing and polishing with synthetic enamel as specified, with handles hinges,screws etc., complete in all respects.

ii) 1-1/2' deep,with back 150 Per Sft

631.30

94,695.00

C-12-P-84 -I-58

iv) 2' deep,with back 150 Per Sft

681.60

102,240.00

C-12-P-84 -I-58

PAINT & VARNISHING

40 Preparing surface and painting with Emulsion paint. 3 coats on new surface

C-13-P-89

a)1st coat 75,300 %SFT

439.85

331,207.05 I-31-a

b)2nd coat and each sub sequent coat: (Two coats)

75,300 %SFT

682.70

514,073.10 I-31-b

41 Extra labour for painting, varnishing, etc. from 20' (6.10 m) height and above, for every additional 10' (3.05 m) height,or part thereof, requiring scaffolding.


278.85

70,317.60 per coat X 3


557.70

32,569.68


836.55

61,235.46

42 Preparing surface and painting of doors and windows any type (including edges):-

C-13-P-86

Prime coat 3,332 %SFT

726.55

24,208.65 I-5-C(i)

Each subsequent coat of paint ( 2 coats)

3,332 %SFT

794.90 26,486.07 I-5-C(ii)

R O O F W O R K

43 Single layer of tiles 9"x4½"x1½" (225x113x40 mm) laid over 4"(100 mm) earth and 1" (25 mm) mud plaster without Bhoosa, grouted with cement sand 1:3 on top of RCC roof slab, provided with 34 lbs. per %Sft. or 1.72 Kg/Sq.m bitumen coating sand blinded.

12,588 %SFT

6,034.75 759,654.33 C-9-P-60-I-5

44 Supplying and laying polythene sheet over D.P.C. under floors and on roofs, etc. ii) 500 gauge (.005" thick)

25,176 SFT

3.80

95,668.80

C-9-P-161-I-37

45 Providing and Laying Insulation material of Extruded Polystyrene XPS in Rigid Insulation / Foam Board on roof or walls, Density 32-38Kg/M, compressive strength 250-400 kpa, R-value 5 per inch thickness and water obsorbtion (1% by volume, cell structure clored cell) i/c cutting and placing in position complete in all respect.

12,588 %SFT

10,582.2

0 1,332,087.34 C-9-P-60-I-35

46 Cast iron rain water down pipe fixed in position, excluding heads and shoes, but including painting and clamps etc.

4" Dia of approved made. 1,215 RFT

214.25

260,313.75 C-9-P-64-I-20

47 Heads for cast iron rain water down pipe fixed in placed i/c cost of clamp holdfast and painting.

4" Dia of approved make. 20 EACH

520.75

10,415.00 C-9-P-62-I-21

48 Shoes, bends or offsets for cast iron rain water down pipe, including fixing and painting.

4" Dia of approved make. 20 EACH

319.85

6,397.00 C-9-P-62-I-22

49 Khuras on roof 2'x2'x6" 20 EACH

461.45

9,229.00 C-9-P-62-I-15

Sub-Total Of Civil Works (Schedule Items)

57,263,570.00


CONSTRUCTION OF STUDENT SERVICE CENTER

ENGINEERS ESTIMATE

CIVIL WORKS NON SHEDULE ITEMS

Sr. No.

DESCRIPTION

QUANTITY UNIT RATE AMOUNT

(1) (2) (3) (4) (5) (6)

Termite proofing

1 Termite proofing of building by spraying approved anti termite liquid with water in the ratio of 1:40 by spraying using approved chemical (Biflex Of FMC) / (Fipronil) and spray over the area of 540 Sft./Per Ltr as per manufacturer recommendation complete in all respect as per specification and as directed by the Engineer Incharge and certificate will be provided by the contractor for 10 years.

81,339 Sft. -

Porcelain Tiles on Floor (24" x24")

2 Providing and laying Porcelain tiles as approved pattern flooring Master or equivalent size 24”x24”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. Granite with dry/wet/venied application,DWV series Polished (Light color) class SB.

4,964 Sft. -

Porcelain Tiles on Walls

3 Providing and laying Porcelain tiles dado/ skirting as approved pattern Master or equivalent size 24”x24”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. Granite with dry/wet/venied application, DWV series Polished (Light color) class SB.

51 Sft. -

Porcelain Tiles on Floor (12" x24")

4 Providing and laying Porcelain tiles as approved pattern flooring Master or equivalent size 12”x24”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. MCT Series Light Colors Matt/ Glazed (SB)

12,613 Sft. -


5 Providing and laying Porcelain tiles dado/ skirting as approved pattern Master or equivalent size 12”x24”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. MCT Series Light Colors Matt/ Glazed (SB)

521 Sft. -

Porcelain Tiles on (Bath Rooms & Toilets)

6 Providing and laying Porcelain tiles as approved pattern flooring Master or equivalent size 12”x18”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. SP Series on matching color base (Glossy / Matt) Light Color Rectified SB.

3,638 Sft. -


7 Providing and laying Porcelain tiles Dado /skirting as approved pattern Master or equivalent size 12”x18”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. SP Series on matching color base (Glossy / Matt) Light Color Rectified SB.

8,832 Sft. -


8 Providing and laying Porcelain tiles Dado /skirting as approved pattern Master or equivalent size 8”x8”x3/8" Light colour laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement and matching pigment etc complete in all respect and as approved by the Engineer Incharge. SP Series on matching color base (Glossy / Matt) Light Color Rectified SB.

896 Sft. -

Vinyl Floor

9 Providing And laying Anti-Static (Poly Vinyl) Floor & wall Sheet 03-Mm Thick i/c Cost of Adhesive and Joint Welded with Machine Etc Complete in all respect As Approved By The Engineer Incahrge.

890 Sft. -

Sports Flooring

10 Providing and laying at any hight at any floor special indoor sports flooring, comprising of 10mm thick PU floor Pulastic GT 100 from M/s Sika Descol Pulastic, polyurethane surfacing over high-performance resilient base mat, by Descol, The Netherlands, including adhesives, base mat, polyurethane sealer, polyurethane structure layer, surface topcoat, and court markings complete as Manufacture instruction or as approved by the Consultant.

1,882 Sft.. -

Swimming Pool

11 Providing and laying at any floor IMPORTED, semi glazed mat finish plain Porcelain tiles of approved colour/texture to floors and skirting/Dado, straight or curved, laid with neat cement mixed with water proofing admixture, filling joints with Epoxy filling with matching colour pigments. Application of water repellent for the protection of grouting area to avoid stains, soiling & discoloration of grout, over min. 1/2" average thick cement sand base plaster. Cutting tiles where required making holes for opening, complete in all respects as shown on drawings and as directed by the Engineer. Imported tile (Base price 2000.00 per M2).

5,500 Sft.. -

Marble on Stair Steps

12 Providing & laying prepolished Marble slab china verona uniform Texture ¾ “thick full width area above 4 Sft. laid in white cement and matching pigment over 3/4" thick cement sand mortar (1:2) i/c filling joints in white cement & matching pigment i/c beveling charges on exposed edges complete in all respect as approved / directed by the Engineer Incharge. (For Tread , Riser & Landing).Base price of Marble Rs. 450/-Sft.)

3,418 Sft.. -

Marble Skirting

13 Providing and laying Badal Marble skirting size 12"x4"x1/2" thick properly nosed, laid over wall 1/2" roughly plaster surface with ratio 1:2 cement mortar ,filling joint with white cement, polishing curing etc complete in all respect as per drawing, specification and as directed by engineer Incharge including filling joints in white cement.

871 Rft. -

Fair face GUTKA Cladding

14 Providing and fixing at any floor at any hight fair face brick Gutka 2-¼" thick 9"x 2-¼"x 2-¼" cladding laid with CS mortar 1:3 and flush pointing with 1:3 cement, surkhi on external walls, straight or curved including anchors, dowels, keys, 12" wide expanded metal at every horizontal sixth layer and 1-1/2"x1-1/2"x1/8" angle iron after every 4' height and below lintels/beams for anchorage and SS nails @12 c/c both ways, including cost of cement plaster/mortar of any thickness between cladding and wall, making grooves, including cost of water repellent coat of "ICI" "Imporiant" or equivalent approved, as shown on drawing, cleaning, finishing, scaffolding, lifting, hoisting etc., joints true to plumb and line complete in all respects as per drawings and as directed by the Consultant (at approximate 50'-0" hight).

26,752 Sft. -

“GYPSUM BOARD” with Concealed Metal with Furring Channels

15 Providing and installing at any floor at any height Gypsum Board suspended ceiling at any height at any floor comprising of imported Elephant/Kanauf Brand size min. 4'x12x12mm thick firmly bonded on both sides with special liner / square / tapered edge suspended on galvanized steel 22 SWG 45 mm primary channels and 24 SWG 50 mm furring channels, and white painted edge trim including cost of filling of joints with gypsum compound. Suspension shall be by means of adjustable suspenders of 8 SWG galvanized steel wired and Aluminium channels and cadmium plated spring clips at 1'-6" centre-to-centre. The suspenders shall be fixed to the slab / beam soffits with nylon anchors, and 1-1/2" x No. 12 round head stainless screws (Spit) Imported and washers etc complete in all respects and as directed by the Engineer..

The unit rate should include cost of making access doors, openings for fixing and supporting light fittings, A.C. grills, etc. 4,660 Sft.

-

Low height Wooden Partion

16 Providing, fabricating and fixing at any floor at any height,Low height Wooden partion, the work comprising of fixing 2"x3" partal wood outer frame with 2" x 2" partal wood internal braces,Bottom frame fix with Ms sheet 16 swg U shape 3"x2" including cost of rawal bolts, screws, nails, glue and wood preservative treatment. including Fixing 3/4" thick Imported Lasani board (700 density) on both side with importes fabric claded on 3/4" mdf as approved, including cost of wooden moulding, beading, polishing of approved shade complete in all respects as per drawing and as directed by the Consultant.

300 Sft. -

Steel Louvered Door

17 Providing, fabricating and fixing in position at any floor steel door consisting of 16 SWG mild steel door frame (Chowkat) filled with P.C.C 1:2:4 and shutter made of 2” x 2" 16 SWG box section frame and making louvers of 18 SWG mild steel sheet including best quality fittings such as earls, handles etc., 3 coats of matt enamel paint of (ICI, JOUTON) approved shade, over one coat of primer of red oxide, to all exposed metal surfaces suitable hold fasts embedded in walls, columns & lintels etc., cutting holes and making good damages complete in all respects as shown on drawing and as directed by the Engineer.

21 Sft. -

Steel Door

18 Providing, fabricating and fixing in position steel door consisting 2-1/2” x 5” (16 gauge) steel frame iron box frame chowkat and shutter made of 2-1/2”x2-1/2” steel tube section box section frame and fixing 22 SWG mild steel sheet on both faces including best quality fittings such as sliding bolts, handles, pin hinges etc., 3 coats of enamel paint (ICI, JOUTON) of approved colour/shade over one coat of primer coat of red oxide, to all exposed metal surfaces galvanized M.S. angles 6" long 2”x2”x1/4” holdfasts embedded in walls, columns & lintels etc., cutting holes, and making good all damages, complete in all respects as shown on drawing and as approved by the Engineer.

46 Sft. -

Door closer

19 Providing and fixing Heavy Duty imported door closers top mounted of approved make with all accessories as per drawing, specification and as directed by the Engineer Incharge.

53 No. -

Stair Railing

20 Providing, fabricating and fixing in position at any height at any floor 3'-0" high stair railing comprising of 2.5” diameter 16 SWG MS pipe metallic Copper painted top rail and 2-Nos 1" dia MS pipe metallic Copper painted at middle fixed with brackets with 2.5” dia. 16 SWG MS pipe metallic Copper painted balustrade fixed after every 4 steps or as shown in drawing, including cost of base plate, rawal bolts, rawal plugs, complete in all respects as detail given in drawing and as directed by the Engineer and as per specifications.

277 Rft. -

Saftey Railing (Ramp)

21 Providing, fabricating and fixing in position at any height at any floor safety railing 3'-0" comprising of 2" dia SS pipe Vertical post @ 4'-0" c/c with 2 no shisham wood hand Rail (2-1/4"x1-1/2") fixing with L shape 1" dia SS pipe , with brackets, base plate with all accessories, complete in all respects as per drawing and as directed by the Engineer.

105 Rft. -

Window Sill

22 Providing and making at any floor Window sill comprising of, Avg 3" thick 12" deep Precast Concrete sill (Terrracotta pigmented), fixing minimum ¾” thick 6" wide pre-polished china verona slab on top of approved colour, with neat cement, making bull nose on edge, i filling the joints with white cement mixed with matching colour pigments, complete in all respects and as per drawing & directed by the Engineer.

428 Rft. -

Mirror

23 Providing and fixing at any floor best quality distortion free imported ("Belgium" "Indonesia") plate glass (beveled) mirror 5 mm thick fixed with SS clamp/bolts, beading etc, as detail given in drawing, complete in all respect, as directed by the Engineer.

1,100 Sft. -

Vanity & Kitchen Counter

24 Providing and making at any floor Vanity counter comprising of, 2" thick 24" deep RCC shelve, fixing minimum ¾” thick imported pre-polished China verona marble slab of approved colour, with neat cement, making bull nose on edge, including fixing min. ½” thick China verona marble shelve, including making holes ,filling the joints with white cement mixed with matching colour pigments, including cost of steel reinforcement, plaster 1:4 to bottom of RCC shelve, complete in all respects and as directed by the Engineer.

195 Rft. -

Teflon Roofing System

25 Providing, fabricating and fixing in position at any floor at any hight, TENSILE TEFLON FABRIC Type 2 950 GM/M2 PVC coated Tensile Fabric Entrance Shade with structure roofing system work comprising of, fabricating and fixing in position steel structure supports, i-s MS brackets, MS pipes, base plates, angle, Tee, Flat, nut, bolts, studs embeded in concrete with epoxy, fixing teflon sheet (INTERFORM/ MEHLER or equivalent approved) quality/color/make with stretch wire including nuts bolts, turnbuckles and all alied works, rust proofing and matt enamel paint of "ICI" "JOUTON" or equivalent approved, to steel work lifting, hoisting etc complete in all respects as per drawing and as approved by the Consultant.

7,000 SFT -

Sub-Total Of Civil Works (NON-Schedule Items) -

LAHORE COLLEGE FOR WOMEN UNIVERSITY (LCWU), LAHORE

STUDENT SERVICES CENTER

ENGINEER'S COST ESTIMATE

PLUMBING WORK

Sr. No.

M.R.S LHR 1st BI-

ANNUAL2017 Description Unit Quantity

Unit Rate (Rs.)

Amount (Rs.)

SCHEDULED ITEMS

PLUMBING FIXTURES

WATER CLOSET

For Common Areas

1 19-1-i Providing and fitting glazed earthen ware water closet European type, excluding seat and cover:-

i) white Each 24

2,147.05

51,529

SEAT COVER

2 19-2-ii Providing and fixing, double seat and cover only.

ii) plastic Each 24

232.30

5,575

WASH HAND BASINS

For Common areas

3 19-6-i Providing and fitting glazed earthen ware wash hand basin 56x40 cm (22"x16") including bracket set, waste pipe and waste coupling, etc.

i) white, with pedestal Each 29

2,493.75

72,319

STAINLESS STEEL SINK

4 19-7 Providing and fixing stainless steel sink with drain board, size 120 x 60 cm (48"x24") including bracket set, waste pipe and waste coupling. Each 1

4,434.15

4,434

5 19-31-ii Providing and fitting, chromium plated or brass oxidised, swan neck cock 15 mm (½") dia.

ii) two way Each 30

641.25

19,238

CONNECTION PIPE

6 19-7-I Providing and fixing 1.5 cm (½") dia connection, including check nuts, etc.:-

i) plastic rubber connection Each 98

48.90

4,792

TEE STOP COCK

7 19-27 Providing and fixing chromium plated tee stop cock.

15mm (½"). Each 98

453.50

44,443

BATH FITTING

8 19-22 Providing and fitting:-

i) plastic soap dish Each 35

160.30 5,610.50

ii) plastic toilet paper holder Each 30

225.55

6,766.50

iii) plastic towel rail Each 35

249.55

8,734.25

iv) plastic shelf 60x13 cm (24"x5") with bracket and railing. Each 35

431.20

15,092.00

LOOKING GLASS

9 19-19 Providing and fixing looking glass 55x40 cm (22"x16") size, and 5 mm thick, first quality. Each 35

283.70

9,930

10 19-28-ii Providing and fixing chromium plated shower rose:-

ii) 2x15 cm (¾"x6") Each 10

411.50

4,115

11 19-29 Providing and fixing, chromium plated mixing valve, for wash hand basin, sink or shower. Each 10

1,558.40

15,584

12 21-7-b Constructing gully grating chamber, 12"x12", ( 300x300 mm) complete in all respects:

b) concrete Gully trap. Each 6

3,015.30

18,092

G.I PIPE

13 23-22-ii Providing, laying, cutting, jointing, testing and disinfecting G.I. pipeline in trenches, with socket joints, using G.I. pipes of B.S.S. 1387-1967 complete in all respects, with specials and valves.

ii) Medium Quality

1-1/2" dia Rft. 121

180.80

21,877

2-1/2" dia Rft. 358

314.80

112,698

SEWERAGE , VENTS & ROOF DRAINAGE

14 23-26 Providing, laying, cutting, jointing, testing and disinfecting P.V.C. pipe line with `B' Class working pressure pipe, in trenches, complete in all respects:-

a) 3" i/d (75 mm) Rft. 204

106.05

21,634

b) 4" i/d (100 mm) Rft. 1,100

159.05

174,955

e) 8" i/d (200 mm) Rft. 517

470.45

243,223

Total Amount Rs. "SCHEDULE ITEMS"

860,641




PLUMBING WORK

Sr. No.

M.R.S LHR 1st BI-

ANNUAL2017 Description Unit Quantity

Unit Rate (Rs.)

Amount (Rs.)

NON-SCHEDULED ITEMS

DOUBLE BIBCOCK

1 N.S Providing fixing, testing and commissioning of double bibcock with muslim shower along with WCs, including all necessary accessories required for installation, complete in all respects.

Basic Price of Double Bibcok with Muslim Shower = Rs. 2,500/-

Nos. 32 -

EUROPEAN W.C. (For Disabled Persons)

2 N.S Providing, Installing and fixing European type ceramics ware, including double bibcock with muslim shower, C.P. Tee stop, cistern, for Bath for disabled persons with hinged double bacolite seat and cover of best quality, fixing connection pipes, all joints to services and drains, plugging and screwing as necessary to the structure and make good the same including core cutter for cutting of concrete slab complete in all respect as per drawings and as directed by the Engineer.

European W.C. with seat cover.(Basic Price of W.C & cistren 20,000/-Rs) Nos. 6 -

WASH BASIN (For Disabled Persons)

3 N.S Providing, Installing and fixing wash hand basin with basin mixer including C.P. Tee stop, waste coupling, bottle trap and fixing, connection pipes, connections to water lines, C.P. brass union, nuts, washers, etc. complete in all respect as per drawings and as directed by the Engineer.(Basic Price of wash basin 5,000/-Rs) Nos. 6 -

WATER SUPPLY SYSTEN

4 N.S Providing, fixing, jointing and testing Polypropylene Random (PPR) PN20 pressure pipe for cold, hot and hot water return water as per DIN 8077-8078 for pipes and DIN 16962,PN25 for fittings (polyfusion welded joints) inside building including fittings and specials (sockets, tees, elbows, bends, crosses, reducers, adaptor, plugs and union etc.) supported on walls or suspended from roof slab or run in chases including pipe hangers, supports, walls cutting and concrete in slabs with core cutter for pipelines complete in all respects.

20 mm dia Rft. 1,496 -

25 mm dia Rft. 759 -


40 mm dia Rft. 83 -

50 mm dia Rft. 33 -


75 mm dia Rft. 33 -

GATE/BALL VALVES

5 N.S Providing and installing gate/ball valves of following nominal dia, of approved make ,including jointing ,fitting, painting, testing, complete in all respects to match with following PPR pipe diameters.

25 mm dia Each 8 -

32 mm dia Each 8 -

40 mm dia Each 8 -

50 mm dia Each 1 -

63 mm dia Each 2 -

75 mm dia Each 2 -

FLOOR DRAIN

6 N.S Providing and fixing 4" dia Floor Drain with P-trap including Stainless Steel grating, core cutter for cutting of concrete slab and cover of approved make, including all necessary accessories required for installation, complete in all respects.

Nos. 66 -

RECTANGULAR MANHOLE

7 N.S Construction of rectangular manhole of 2'x2'x2' for sewer complete with 9" thick brick work ratio 1:5, plastering from internal and external side Ratio 1:4, PCC 1:4:8 base, RCC slab, benching with 1:2:4 cement concrete, including 18" dia manhole cover and frame, complete in all respect as per specifications and drawings and as directed by the Engineer. Each 13 -

CLEAN OUT

8 N.S Providing and fixing 4" dia Clean Out for uPVC Pipes including Stainless Steel Cover Plate of approved make as approved Engineer Incharge complete in all respects to their entire satisfaction. Each 10 -

GREASE TRAP

9 N.S Providing and fixing Grease trap of approved make, including all necessary accessories required for installation, complete in all respect as per specifications and drawings and as directed by the Engineer. Rft 1 -

FIRE FIGHTING SYSTEM

10 N.S Providing and fixing NFPA approved portable fire extinguishers of following types and capcities at desired locations, complete in all respects.

Dry Chemical Powder Fire Extinguisher: Portable, Stored Pressure Type Highly Effective on A, B, C & E Class of Fire, Capacity : 06Kg Model : NP6 Fire Rating : 34A 183B Working Pressure : 14 Bar Tested at Pressure : 30 Bar

Nos. 15 -

Over Head Water Tank

11 N.S Providing G.I pipe pieces in over head water tank for sleeves in R.C.C. walls, pipe connection (G.I) with inlet / outlet pipe work, manhole covers etc, including all necessary accessories required for installation, complete in all respects.

Job 1 -

Geyser

12 N.S Providing, installing, test and commission electric geyser of make approved 10 litter capacity complete with inlet, outlet, safety valves complete in all respects. (Base Price Rs. 15,000/-)

Nos 14 -

Total Amount Rs. "NON SCHEDULE ITEM" -




SWIMMING POOL

Sr.

No. Description Unit

Quantit

y

Unit

Rate

(Rs.)

Amount

(Rs.)

SWIMMING POOL

1 Providing, Installation, testing and commissioning sand filter &

filtration Pump of the following specification, complete in all respect,

as shown in drawing or as directed by the Engineer Incharge.

Eac

h 3

-

Sand Filter 36”

Brand As tral, Spain

Model Cantabric

Product 22402

Flow Rate 30 m3/hr

Material Injection Molded

Diameter 900mm

Flange Connection 2.5”

Mul tiport Valve Side Mounted

Swimming pool Filtration Pump


Model Victoria Plus

Design Flow 34000 l /h

Horsepower 3

Killowatt 2.2

Vol tage(s) 220V – 400V

Phase(s) Three Phase

Filter Media

2 Providing, and laying filter media of the following specification,

complete in all respect, as shown in drawing or as directed by the

Engineer Incharge. Kgs 1200

-

Underwater Pool Lights

3 Providing, Installation, testing and commissioning underwater pool

lights of the following specification, complete in all respect, as shown

in drawing or as directed by the Engineer Incharge.

Eac

h 16

-


Warranty of Pool Lights 2 Years

Product 07844

Vol tage (V) 12

Wattage (W) 300

Cord Length (Ft.) 15

Transformer for Pool Lights

4 Providing, Installation, testing and commissioning transformer for

Pool Lights of the following specification, complete in all respect, as

shown in drawing or as directed by the Engineer Incharge.

Eac

h 16

-

Brand Local

Input Power 220V, 50 Hz

Output Power 12V, 100 Watt

Connection Box for Light

5 Providing, Installation, testing and commissioning connection box for

light of the following specification, complete in all respect, as shown


Eac

h 16

-


Code 30825

Color White

Material ABS

Wall Fittings - Inlets

6 Providing, Installation, testing and commissioning wall fitting of the

following specification, complete in all respect, as shown in drawing

or as directed by the Engineer Incharge.

Eac

h 18

-


Model 00295

Description Dia 50mm

Material ABS

Standard Volume 0.020 m3

Suction/Vacuum Fittings

7 Providing, Installation, testing and commissioning suction / vacuum

fittings of the following specification, complete in all respect, as


Eac

h 4

-


Model 00301

Description 50 mm

Material ABS


Main Drain (3 for sand filters and 2 for overflow tank)

8 Providing, Installation, testing and commissioning main drain of the



Eac

h 5

-


Model 00258

Description 210mm x 210mm

Material ABS

Color White


Stainless Steel Ladders 3-Treads

9 Providing, Installation, testing and commissioning Stainless Steel

Ladders 3-Treads of the following specification, complete in all

respect, as shown in drawing or as directed by the Engineer Incharge.

Eac

h 2

-


Model 05477

Hand Rails Polished with 43mm Dia with SS non slip Steps

Material Rails & s teps in AISI-316.

Steps 3 Nos .

Standard Weight 11.5 Kg

Stainless Steel Ladders 5-Treads

10 Providing, Installation, testing and commissioning Stainless Steel

Ladders 5-Treads of the following specification, complete in all

respect, as shown in drawing or as directed by the Engineer Incharge. Eac

h 2

-


Model 05479

Hand Rails Polished with 43mm Dia with SS non slip Steps

Material Rails & s teps in AISI-316.

Steps 5 Nos .

Standard Weight 15.0 Kg

Maintenance Kit (Commercial)

11 Providing, Installation, testing and commissioning maintenance kit

(Commercial) of the following specification, complete in all respect,

as shown in drawing or as directed by the Engineer Incharge.

Job 1

-

Aluminum pool cleaner for public pools


Type Aluminum Vacuum Head

Model 01358

Length 450mm

Specification With bracket, connected to the hose with wing nuts

Standard Volume 0.05m3

Telescopic Aluminium Hose - Public pools


Type Telescopic Rod

Model 01362

Length 5-10 meter

Specification Reinforced aluminium telescopic handle

Standard Volume 0.02m3

Floating suction hose


Type Hose Pipe

Model 01372

Dia 1-1/2”

Specification Transparent blue Polyethylene hose.


Leaf Skimmer


Type Leaf Skimmer

Model 36614

Specification Shark. Fas tened by means of a clip or wing nut


Curved brush


Type Curved brush

Model 66052

Specification Specially for pool floors and walls


Basic pH and chlorine test kit - Basic Line


Type Test Ki t

Model 38637

Specification With OTO and phenol


Overflow Grating 9.5”

12 Providing, Installation, testing and commissioning overflow greating

9.5 " of the following specification, complete in all respect, as shown


Brand Local

Material Pure PP (Polypropylene)

Si ze 9.5 Inch

Type Multi Purpose Rft 275

-

Gutter Drain/Over Flow Fitting

13 Providing, Installation, testing and commissioning gutter Drain/Over

Flow Fitting of the following specification, complete in all respect, as



Model 00302

Color White

Material ABS

Standard Volume 0.016 M3 Eac

h 20

-

Anchor Cup

POOL SPECIALTY FITTINGS

14 Providing, Installation, testing and commissioning anchor cup of the



Eac

h 14

-


Description Anchor Cup wi th SS bar, white

Model 09206

Material AISI - 316

uPVC Pipes and Fittings

15 Providing, Installation, testing and commissioning uPVC pipes

fittings of the following specification, complete in all respect, as


L.S 1

-

Pipes and Fitting Size 2”

Schedule 40

Class D

Specification With Double Union Valve

16 Distribution Board - SWIMMING POOL

Supply at site, installation, testing, commissioning fabrication and

connections of wires / cables of Distribution Boards - "Swimming

Pool" concealed type or as per site to be installed as and where shown

on drawing, made of MS Sheet 16 SWG with hinged door, handle,

catcher, earthing bar, neutral strip, internal wiring from MCBs

terminating on cable terminal blocks, 2 coats of antirust and powder

coated paint of approved colour, including cost of all necessary

materials complete in all respects. DB shall have 3 Phase indication

lamps of colour Red, Yellow, Blue, 1 Digital Voltmeter and shall be

manufactured by any one of the manufacturers and conforming to

single line diagram. Sizes of the body of all DB shall be of identical

dimensions irrespective the quantity of outgoing MCBs. Arrangement

shall be made at the top of DB for installation of cable terminals

blocks and cable glands for incoming cables.

Incoming

1: 50 Amps 3 Adjustable Moulded Case Circuit Breaker (MCCB) Ics:

18KA.

Outgoing

2: 3 Nos. 20 Amps Three Pole MCB’S Ics: 10 KA for Pumps and Filters

3: 6 Nos. 10 Amps Single Pole MCB’S Icu: 6 KA for Pumps and Filters Nos. 1

Total Amount Rs.

-


CONSTRUCTION OF

STUDENT SERVICE CENTRE

SUMMARY OF COST

Sr. No. Section Description Amount Rs.

1 A L.T. Switchgear Main Panel Board & DB's. -

2 B Internal Wiring Concealed with PVC Conduit.

-

3 C Fitting & Fixtures. -

4 D Cables, Conduits & Cable Trays -

5 E Voice Data System. -

6 F EARTHING SYSTEM -

Grand Total Rs. -


CONSTRUCTION OF

STUDENT SERVICE CENTRE

SECTION - A

L.T. SWITCH GEAR MAIN PANEL BOARD AND DB'S

S. No.

Description Qty.

Unit

Rate Amount

1 L.T. MAIN PANEL BOARD

Supply, installation and commissioning of L.T. Main Panel Board (MPB) installed in sub-station made of sheet steel 14 SWG totally enclosed, indoor floor mounting cubical type, in free standing design including all auxiliaries, internal wiring, designation labels of various circuits, earthing bar, suitable for system voltage 415V, 50Hz, 3 phase and neutral bus bars of 99.8% electrolytic copper capacity of 1000 Amps. All ACBs and MCCBs shall be suitable to operate without any derating at 45°C ambient temperature and shall be of one make only and not mixture of 2 or 3 manufacturers. The back of the panel shall be lockable door instead of bolted back cover and shall conform to single line diagram. Main Panel board shall be manufactured by any one of the manufacturers as mentioned in Annexure "B". The enclosure shall be form-3 B type.

Incoming

1: 300 Amps triple pole MCCB having overload and short circuit protection. Ics:15 KA at 415 V.

1: Surge Arrestor with TPN & E module 100 KA, rating

3: Air cooled ring type current transformers ratio 300/5Amps having suitable output and accuracy.

1: Digital Ammeter scaled 0-1000 Amps of appropriate size, square shaped with Amps selector switch 4 positions .

1: Digital Voltmeter scaled 0-500 Volts of appropriate size, square shaped with volt selector switch 7 positions.

3: Phase indication lamps of colour Red, Yellow and Blue.

1: Earthing and neutral bars with necessary holes, washers , nuts and bolts etc.,

2: Earthing terminals

Required Sets of Brass cable glands to be installed at the bottom/top of MPB for outgoing cables as per sizes shown on drawings.

OUTGOING MCCBs.

1: 125 Amps triple pole MCCB having overload and short circuit protection. Ics:15 KA at 415 V





3: Provision of space for installation of MCCB in future but excluding cost of breaker.

1 No. -

2 SUB MAIN PANEL -GF

Conforming to the same constructional specifications as mentioned above for Main Panel Board but equipped with the following.

Incoming.

1: 125 Amps triple pole MCCB having overload and short circuit protection Ics:15 KA at 415 V.

1: Digital square shaped Voltmeter scaled 0-500 Volts with phase selector switch of 4 positions.

1: Digital square shaped Ammeter scaled 0-150 Amps with phase selector switch and CTS.

4: Copper bus bars of capacity 150 Amps.

1: Earthing Bar with necessary holes, nuts and washers etc.

3: Phase indication lamp of colour Red, Yellow & Blue.

1: Neutral bar with necessary holes nuts, bolts and washers etc.,

Required sets of cable terminal blocks suitable for outgoing cables as per sizes shown on drawing.

Required sets of brass cable glands to be installed at the bottom of the SMPB to hold properly incoming and outgoing cables.

Earthing terminals.

Handle to open the front door.

Catcher to properly hold the door.

All internal wiring from MCCBs to cable terminal blocks and instruments wiring, designation lables.

Outgoing.

3: 20 Amps 3-phase MCCB having overload and short circuit protection Ics: 10 KA at 415 V.

5: 40 Amps 3-phase MCCB having overload and short circuit protection Ics: 10 KA at 415 V.

3: Provision of space for installation of MCCB in future but excluding cost of breakers.

1 No. -

3

Distribution Board DB L1-GF,DB L3-GF,DB L1-FF,DB L1-2F,DB L1-3F

Supply, installation, connections of wires / cables and commissioning of Power / light distribution boards (DB) concealed type to be installed as and where shown on drawings or as required at site. Made of M.S. sheet 16 SWG with hinged door, handle, catcher, earthing bar, neutral strip, internal wiring from MCCB's, ELCBs, terminating on cable terminal blocks, 1 coat of antirust paint with further 2 coats of enameled paint of approved colour, including cost of all necessary materials complete in all respects, manufactured by any one of the manufacturers as mentioned in Annexure "B".

Incoming

1: 20 Amps three pole MCCB Ics.: 10 KA at 415 V.

1:

20 Amps four pole RCCB sensitivity 300 mA..


3: Phase indication lamps of colour Red, Yellow, Blue.

1: Copper earthing bar with necessary holes, nuts, bolts and washers.

Outgoing

15:

10/20 Amps single pole MCB Ics.: 10 KA at 230 V.

5 No. -

4 DB-L2-GF

Conforming to the same specifications as that of item No. 3 mentioned above, but equipped as under:

Incoming

1: 30 Amps three pole MCCB Ics: 10 KA at 415 V.

1:





Outgoing

30:

10/20 Amps single pole MCB R.C 10 KA at 230 V.

1 No. -

5 DB- L2-FF


Incoming


1:





Outgoing

24:

10/20 Amps single pole MCB Ics: 10 KA at 230 V.

1 No. -

6 DB-L3-FF


Incoming


1:





Outgoing

21:

10/20 Amps single pole MCB R.C 10 KA at 230 V.

1 No. -

Sub-Total Section - A Rs. -

SECTION -B

INTERNAL WIRING CONCEALED WITH PVC CONDUIT

S. No.

Description Qty.

Unit

Rate

Amou

nt

1 CIRCUIT

Supply, installation and commissioning of light circuit wiring, to be wired with 2x2.5mm2 PVC insulated 300/500 V. grade wire, manufactured by any one of the manufacturers as specified in Annexure-"B" in and including cost of 3/4” dia. heavy duty PVC conduit Polo, Popular or Beta recessed in walls, columns, floors, slabs or as required as per site conditions, all PVC conduit accessories, pull boxes, steel pull wires and 2.5 mm2 PVC insulated wire of color green yellow as circuit protective conductor (CPC) complete in all respects and conforming to general specification. Each circuit shall have independent CPC.

70

No.

-

2

1-LIGHT POINT CONTROLLED BY ONE SWITCH

Wiring of one light point controlled by one switch and wired with 2x1.5 mm2 PVC insulated single core wires 300/500 V grade, manufactured by any one of the manufacturers, as specified in Annexure - “B” in and including cost of 3/4” dia. heavy duty PVC conduit make Popular, Beta or Galco, recessed in walls, columns, ceiling floor including all PVC conduit accessories, 3" high PVC junction Boxes, Pull Boxes, Steel pull wires, 2.5mm2 PVC insulated wire of Colour green yellow as CPC, M.S. Sheet steel switch box 16 SWG with earth terminal and two coats of enameled paint, M.S. Box shall be of the same size as that of 1,2,3 or 4 gang flush type gang switches make Clipsal or Legrand including cost of switches complete in all respects and conforming to general specification.

50

No.

-

3

1-LIGHT POINT CONTROLLED BY 2-2 WAY SWITCH

Same as Item No.2 mentioned above but 2 light points controlled by 2-2 way switch complete in all respects.

2 No

. -

4

2-LIGHT POINTS CONTROLLED BY 1 SWITCH

Same as per Item No.2 but 2 light points controlled by 1 switch complete in all respects.

260

No.

-

5


Same as per item No.2 but 3-light points controlled by 1-switch complete in all respects.

60 No

. -

6


Same as item No.2 but wiring of 4-light points controlled by 1-switch. 16

No.

-

7 CEILING FAN POINT

Same as item NO. 2 mentioned above but wiring of ceiling fan point including cost of M.S. box circular type having M.S hook 5/8” dia to be casted in RCC slab, M.S sheet steel dimmer box 16 SWG with earth terminal and 2 coats of enameled paint of the same size as that of dimmer, including cost of dimmer make LEGRAND complete in all respects.

80

No.

-

8 EXHAUST FAN POINT

Same as Item No. 2 mentioned above but wiring of exhaust fan point complete in all respects.

8 No

. -

9

1-10 AMPS INTERNATIONAL SWITCH SOCKET

Wiring and fixing of 10 Amps switch socket unit away from switch board and wired as shown on the drawings with 2x2.5mm.sq. PVC insulated single core wires 300/500V grade manufactured by any one of the manufacturers as specified in Annexure “B” in and including cost of 3/4” dia. Heavy duty PVC conduit make Galco, Popular or Beta burried under floor recessed in walls, columns, floor, slabs or as required as per site condition, all PVC conduit accessories, PVC junction boxes, pull boxes, steel pull wires, 2.5 mm.sq. PVC insulated wire of colour green, yellow as CPC , M.S. Sheet steel box 16 SWG with earth terminal for socket having 2 coats of enamelled paint, complete in all respects and conforming to general specification Wiring shall be done directly from the MCB installed in the DB without any claim of circuit and MCB but including the cost of socket outlet LEGRAND.

2 No

. -

10 2- 10 AMPS INTERNATIONALSWITCH SOCKET

Same as above item No. 9 but wiring of 2-3 Pin 10 Amps international switch socket make Clipsal/Legrand. Complete in all respects.

8 No

. -



20 No

. -



20 No

. -

EXTERNAL WIRING

1 EXTERNAL LIGHTS

Providing and wiring of external lights with 6mm2 / 3 core PVC insulated PVC sheated cables in 1-1/2" dia. PVC conduit from external lighting D. Boards at different locations. The conduit to be laid in structure slab of parking / paved area and where laid in ground it shall be 2’ deep and jacketed with cement concrete in the ratio 1:3:6 including all connecting accessories and including cost of excavation, backfilling and ramming in layers (Pole lights, flood lights & boundry wall lights, fountain lights).

a)

8light points controlled by 1 MCB. 1

Set.

-

b)

6 light points controlled by 1 MCB. 3

Set.

-

Sub-Total Section -B Rs.

-

SECTION - C

FITTING & FIXTURES

S. No.

Description

Qty.

Unit

Rate

Amou

nt

1 FLUORESCENT FITTINGS

Supply, installation, connecting and commissioning of fluorescent light fittings ceiling / wall mounted made of M.S. body 22 SWG degreased and derusted with white enamelled non yellowing paint complete with precoil chokes, lamp holders, starter, power factor correction capacitor, energy saving tube rods internal wiring, earthing terminal, to be manufactured by any one of the manufacturers as mentioned in Annexure "B" complete in all respects and conforming to general specification.

a)

Make Philips/Sunlight or approved equivalent ceiling mounting / ceiling suspended with 1 xTL5 28 Watt

40 No

. -

b)

Make Philips TCS 398 /Sunlight with 2xTL5 28 Watt warm white or as approved by the Architect.

23 No

. -

c) EMERGENCY LIGHTS.

Providing, installing as shown on the drawing connecting and testing of surface mounted self contained non-maintained 3 hours duration emergency light make MENVIER model No.NS-8W /Olympia Electronics complete in all respects.

4 No

. -

d) EXIT LIGHT

Providing, installing as shown on the drawing, connecting and testing of surface mounted self contained maintained 3 hours duration emergency light make MENVIER NS-8W / Olympia Electronics with exit inscription complete in all respects.

5 No

. -

e)

Make Philips TMS-028/Sunlight or approved equivalent ceiling mounting / ceiling suspended with 2 xTL5 36 Watt

23 No

. -

2 INCANDESCENT FITTINGS

Providing, installing, connecting and testing of incandescent light fittings complete with brass lamp holders, fixing accessories, earthing terminals, lamps. Make as specified and duly approved by the Architect before installation.

a)

Round shaped recessed make Philips / Sunlight /Opple LED down lighter with 14 watt warm white as Approved by the Architect.

75 No

. -

b)

Ceiling light LED 30 watt make Philips / Sunlight/Opple or as Approved by the Architect. 55

No.

-

c)

Ceiling light LED 14 watt make Philips / Sunlight/Opple or as Approved by the Architect.

570

No.

-

d)

Aluminium cast bulk head water tight fitting with 1x20 Watt lamp make Philips. 14

No.

-

3 Supply, installation and commissioning of ceiling fans 56" sweep. Complete with capacitor, hanging rod, canopy, and blades, dimmers nuts and bolts complete in all respects. Make LAHORE FAN, ASIA, PAK

87 No

. -

4 Supply, installation and commissioning of exhaust fans 12" dia. Complete with steel frame, painted steel louvers all necessary accessories make CLIMAX, ASIA, PAK.

9 No

. -

5 EXTERNAL LIGHTING

a) BOLLARDS

Providing, installing, connecting and testing of Bollard light fitting Sunlight type OD-715 or as approved by the Arechitect with 1 No. 23 Watt CFL lamp. The fitting shall be made of cast aluminium and stainless steel alloy in black colour or as approved by the Architect complete with clear impact resistant plastic diffuser and with mounting plate for bolting to a 1:2:4 cement concrete foundations. The cost includes the cost of foundation as well. Fixtures conforming to protection class IP44.

14 No

. -

b) LIGHT FIXTURES FOR RAMPS

Providing, installing, connecting and testing of ceiling / wall mounting light fixture sunlight type OD6000 with 1-PLC 18 Watt CFL lamp. Colour as approved by the Architect. Conforming to protection class IP54.

6 No

. -

c) FLOOD LIGHTS.

Providing, installing, connecting and testing of flood lights Sunlight type medisun with antiglare louvre and 1x250 Watt SON lamp for lighting of building. The light to be placed at ground in water tight concrete pit to suit the fixture and to give the desired angle to the light. The fixture shall be made of die cast aluminium and stainless steel alloy. The glass to be provided so as to bear the load of 450 Kg. It should be complete with necessary incoming and outgoing cable conduits embedded in concrete including cost of foundation in ground and complete in all respects as instructed by the Engineer Incharge / Project Manager. The position as marked on the drawing. Fixture glass vandal proof heat resistant tempered glass conforming to IP44.

10 No

. -

Sub-Total Section - C Rs.

-

SECTION - D

CABLES, CONDUITS & CABLE TRAYS

S. No.

Description Qty.

Unit

Rate

Amount

1 L.T. POWER CABLES.

Supply, installation and commissioning of PVC insulated PVC sheathed non armoured copper conductor cable 600 / 1000 V grade manufactured by any one of the manufacturers as specified in Annexure "B" in pre-laid conduits / trenches /cable tray to be installed as per details shown on drawings to various SMPB's, DBS, including cost of all necessary materials, connections and designation labels at both ends for the following sizes complete in all respect and conforming to general specification. Actual length of cables shall be measured at site by the Contractor before placing the order with the manufacturer, however, approximate length of cables are shown herewith.

i) 4 Core Cables

a. 4 Core 6mm.sq.

450

Rft.

-

b. 4 Core 10mm.sq.

50

Rft.

-

c. 4 Core 16mm.sq.

550

Rft.

-

d. 4 Core 70mm.sq.

400

Rft.

-

e. 4 Core 240mm.sq.

250

Rft.

-

2 PVC CONDUIT.

Supply, installation of following PVC conduit heavy duty make Polo, Popular or Beta to be recessed in walls, floors, to pull electric cable as required at site and as shown on the drawing. including PVC conduit accessories steel pull wires, complete in all respects and conforming to general specification.

a. PVC conduit 1” dia. 50

Rft.

-

b. PVC conduit 1-1/2” dia.

100

Rft.

-

c. PVC conduit 2” dia.

474

Rft.

-

d. PVC conduit 4” dia.

475

Rft.

-

e. PVC conduit 6” dia.

475

Rft.

-

3

CEILING SUSPENDED VERTICAL / HORIZANTAL CABLE TRAY.

Supply, fabrication and installation of G.I. perforated cable tray made of M.S. sheet 14 SWG 8 ft to 10ft long with sides 3" high which shall be installed on wall or in vertical or in horizantal position in electrical duct including cost of fixing arrangement brackets made of angle iron 1-1/2"x1-1/2" x 1/4" installed at every 3 ft. cost of all necessary material complete in all respects and conforming to general specification.

a. 6” wide.

350

Rft.

-

b. 12” wide. 10

Rft.

-

Sub-Total Section - D Rs.

-

SECTION -E

VOICE DATA SYSTEM

S. No.

Description Qty.

Unit

Rate

Amou

nt

1 Voice Points

Wiring for voice points with 4 pair Cat. 6 (STP) copper conductor PVC sheathed computer cable manufactured by M/s. Norden from VD cabinet. In and including cost of 1" dia. PVC conduit make Popular or Polo, recessed in slabs, walls, floors or as per site condition complete with all necessary conduit accessories, M.S. box 16 SWG 75mm x 75mm with earth terminal, duly painted with anti rust paint, including cost of voice socket of Norden make with all necessary materials complete in all respects.

5 No

. -

2 Data Points

Wiring for each computer data points with 4 pair Cat. 6 (STP) copper conductor PVC sheathed computer cable manufactured by M/s. Norden from VD cabinet. In and including cost of 1" dia. PVC conduit make Popular or Polo recessed in slabs, walls, floors or as per site conditions, complete with necessary conduit accessories, M.s. box 16 SWG 75mmx75mm with earth terminal, dully painted with anti rust paint, including cost of data socket of Norden make with all necessary materials, complete in all respects.

5 No

. -

3 Voice Data Cabinet

Supply, installation, testing and commissioning of voice data cabinet (VD) made of 16 SWG sheet steel with electrostatic paint of approved colour make Norden including cost of power bus bar, patch panel,cable manager , patch cords (both for voice and data) make Norden with all necessary accessories material, complete in all respects.

3.1 VDC-1-GROUND FLOOR

2 Voice patch panel 12 Port Cat.6 STP.

1 Data patch panel 12 Port Cat.6 STP..

2 HP 12 Port Switch 10/100/1000 layer 2 managable

5 Voice patch cords.

5 Data patch cords.

1 15 Amps PDU 1 No

. -

4 Voice Cables

Supply, installation and commissioning of the following pair voice cables manufactured by Norden or approved equivalent with connections at both ends designation labels in pre-laid conduits / trenches / cable tray, complete in all respects and conforming to general specifications.

i) 10 Pair.

500

Rft.

-

Sub-Total Section -E Rs.

-

SECTION -F

EARTHING SYSTEM

S. No.

Description

Qity.

Unit

Rat

e

Amou

nt

1 EARTHING.

Supply, installation and testing of the earthing plates including cost of the following excavation and refilling charges of the earth pit up to 4000mm depth tinned copper plate of size 600x600x3mm two copper conductor 70mm2 to be drawn up to earth connecting points in G.I pipe 50mm dia.Including cost of all G.I pipe accessories,charcoal and lime mixture all around the vertical installed plate, lugs,thimbles,pit with 300mm dia cover and all neccessary material.Complete in all respects.

a)

Metallic body of all sub station equipment. 2

No.

-

2

Supply, installation, connecting and fixing of two 2x 70mm2 single core cable along the walls of cable tray in all vertical / horizontal runs of the tray starting from electric room and ending in the electrical rooms / electrical distribution equipment from where all distribution equipment shall be earthed with 2 separate CPC as shown on the drawings.

350 Rft

.

-

3 Providing, installing and earthing the metallic bodies of sub station equipment with 2x70mm2 HDBC conductor from nearest earth connecting point to the earth terminal provided on the body of the equipment.

500 Rft

.

-

4 EARTH CONNECTING POINTS (ECP).

Supply, installation of earth connecting points consisting of copper plate 12" long, 2" wide and 1/2" thick to be installed as and where shown on drawings on the wall,complete with fixing arrangement, brass nuts bolts complete in all respects to facilitate connections of Incoming copper strip and Outgoing CPC’s.

10 No

.

-

5 Supply, installation and connection of PVC insulated stranded copper conductor single core wire of colour green, yellow to be used as CPC between DB's as shown on the drawing, including cost of brass, nuts, bolts, washers, lugs, thimbles, complete in all respects for the following sizes. Actual length shall be measured at site and paid accordingly.

a)

6 mm2 200 Rft

-

b)

10 mm2 10 Rft

-

c)

16 mm2 250 Rft

-

d)

25 mm2 10 Rft

-

e)

35 mm2 375 Rft

-

Sub-Total Section - F Rs.

-

eproc.punjab.gov.pkeproc.punjab.gov.pk/biddingdocuments/80238_dnit.pdf20 providing , laying watering...

Documents