epdm ps flashing
DESCRIPTION
Carlisle flashingsTRANSCRIPT
-
CARLISLES
PRESSURE-SENSITIVE FLASHING
ROOFING AMERICA: OVER 40 YEARS AND 10 BILLION SQUARE FEETTM
800-4-SYNTECwww.carlisle-syntec.com
Carlisle SynTec IncorporatedP.O. Box 7000 Carlisle, PA 17013International: 717-245-7000Fax: [email protected]
Sure-Seal Pressure-Sensitive Elastoform FlashingThis flashing is an uncured, black EPDM membrane laminated to a fully-cured synthetic rubber, pressure-sensitive adhesive. It is available in 9"-and 12"-wide and 50'-long rolls and is a nominal 95-mils thick. It is idealfor field-wrapping large (greater than 6") pipes or penetrations. Thisflashing provides cost-and labor-savings in field applications.
System Accessories
Sure-Seal Pressure-Sensitive Elastoform Flashing
Sure-Seal Pressure-Sensitive Elastoform FlashingTypical Properties and CharacteristicsColor BlackBase Membrane - EPDM
Adhesive - Synthetic RubberOzone Resistance No cracksCondition after exposure to 100 pphm Ozone in air for 168 hrs. @ 104F (40C). Specimen under 50% strain. Brittleness Temp -49F (-45C)Nominal Thickness 95-mil (1.91 mm)Nominal WidthMembrane 12" (305mm)Adhesive 12 3/16" (309.562mm)
Net Weight per Roll 18 lbs. (8 kgs)Packaging 1-50' (15.2m) roll / cartonShelf Life 9 months when stored
between 60-80F (15-26C)
Sure-Seal Pressure-Sensitive Inside/Outside CornersInside/Outside Corners consist of uncured Elastoform Flashing laminatedto SecurTAPE, providing 95-mils of total thickness. Pre-cut Cornersafford installation speed and can be used for both inside and outsideinstallations.
Sure-Seal Pressure-Sensitive Inside/Outside Corners
Sure-Seal Pressure-Sensitive Inside/Outside CornersTypical Properties and CharacteristicsSizes 7" x 9" (180 mm x 230 mm)Color Black Packaging 20 / cartonWeight 5 lbs. / carton (2.25 Kg)Shelf Life 6 months when stored
between 60 and 80F (15 to 26C)
-
CARLISLES
PRESSURE-SENSITIVE FLASHING
ROOFING AMERICA: OVER 40 YEARS AND 10 BILLION SQUARE FEETTM
800-4-SYNTECwww.carlisle-syntec.com
Carlisle, Elastoform FLashing, RUSS,Sure-Seal, Sure-White and SecurTAPEare trademarks of Carlisle SynTecIncorporated.
REPRINT REQUEST CODE602109 - Pressure Sensitive Flashing - 122204
2005 Carlisle SynTec IncorporatedPrinted In U.S.A.
System Accessories
Pressure-Sensitive Curb FlashingCarlisles Sure-Seal Pressure-Sensitive Curb Flashing is a labor savingsolution for flashing curbs and walls. The 18 cured 60-mil EPDMmembrane flashing is manufactured with Carlisles Factory-AppliedSecurTAPE technology to provide a more efficient approach to flashingcurbs.
Simple Flashing curbs is made easy by minimizing the number ofpieces of flashing that must be handled. Simply apply Carlisle bondingadhesive to the flashing material and the curbs vertical surface. Wrap theflashing around the curb in one piece. After priming the deck membrane,the upturned flange is cut at the corners so the factory-applied tape canbe mated to the roof. Corners are then completed using Carlisle pressure-sensitive corners.
Quality During production, SecurTAPE is applied to the flashing underfactory-controlled conditions. Stringent application tolerances of 1/8"-1/4" for the SecurTAPE result in a neater appearance and ultimatelystronger seams.
Speed Pressure-Sensitive curb flashings save time over conventionalcured flashings that need to be cut to fit and primed. Additional time issaved because crews spend less time measuring these areas and setting up.
Pressure Sensitive Curb FlashingPressure-Sensitive Curb FlashingTypical Properties and CharacteristicsBase Membrane - EPDM Adhesive-Synthetic PolymersThickness Membrane - 60-mil (1.52mm)Size 18" x 50' (460mm x 15.2m)Packaging 50 lf/carton (15.2m) - 1 roll/cartonWeight/Carton 30 lbs. (13.6kg)Shelf Life 1 year