epc design implementation safety security totem international ltd ceo firoze zia hussain

Presentation onPresentation onEPC design and EPC design and implementation for safety implementation for safety and securityand securityat Cerebral conference at at Cerebral conference at hyderabadhyderabad

Firoze Zia HussainCEO TOTEM INTERNATIONAL [email protected]+919618621234

Heightening security withHeightening security withtechnological advancements technological advancements

EXCELLENCE IN DELIVERING EXCELLENCE IN DELIVERING EPC/INFRASTRUCTURE EPC/INFRASTRUCTURE PROJECTSPROJECTS

Safety And Security in EPC Safety And Security in EPC Design and ImplementationDesign and Implementation

Introduction To Security-Introduction To Security-standardsstandards

IMO

ISPS code(2002)

SOLASDifferent codes For airports ,….

04/08/23 5Totem International Ltd

Security can preventSecurity can prevent

Terrorist Attacks.Theft from premises.


Technological models to enhance Technological models to enhance efficiency efficiency


Technologies' in Technologies' in ports ports

Technologies


RFID TechnologyRFID TechnologyADC technology.An Rfid System Compromises of

One or more RF tags

Two or more antennas

One or more interrogators

One or more host computers

Appropriate software


GPS TechnologyGPS TechnologyUsed to track the positionTo avoid theftHighly effective & reliableNot only track the position of asset but also see what is happening.Can be used from any whereby making use of gps device.Device may be very small like a Watch or button on collar


Cloud TechnologyCloud Technology


Biometrics TechnologyBiometrics Technology


Uses of BiometricsUses of BiometricsIncreases SecurityReduces fraud by employing hard

to forget technologies & materialsCan be of assistance in providing

viable solution to securityMakes it possible to know who did

what when and whereIncreases ROI in areas like Loss

prevention and time of attendence of emplyees


Wireless TechnologiesWireless TechnologiesFlow of information

EmployeesEmployees

ClientsClients

Dock SideDock Side

Head officeHead office

Sea Sea

Installing Perimeter SecurityInstalling Perimeter Security


Intrusion DetectionIntrusion DetectionDesigned to alert the authority to a specific danger.IndooroPassive infrared detectorsoUltrasonic detectorsoMicrowave detectorsoPhoto-electric beamsoGlass break detectorsoSmoke, heat &carbonmonoxide

detectors

Out Door SensorsOut Door Sensors

Vibration (shaker) or inertia sensors Passive magnetic field detection E-field Microwave barriers Microphonic systems Taut wire fence systems Fibre optic cable H-field


Monitored Security SolutionsMonitored Security Solutionslinked via the telephone line or cellular

network or both to an Alarm Receiving Centre (ARC).

contacting the right Authority - i.e. the police usually, or the Fire & Rescue Service (FRS) in the case of a fire - if there is an activation.

highest standards of operation.


Passive systemsPassive systems

Detects a potential security breachlogs the information signals an alert on the console and or

owner.


Reactive SystemsReactive Systemsknown as an intrusion prevention

system (IPS).auto-responds to the suspicious activity by

resetting the connection. reprogramming the firewall to block

network traffic from the suspected malicious source.

IDPS is commonly used automatically at the command of an operator; systems that

both "detect" (alert) and/or "prevent."


Detection/alarm system. Deter theft as well as vandalism. 24-hour protection of your assets and resources. Lower their risks associated with theft. Decreasing costs associated with .

* insurance premiums.

repair or replacement of property or equipment that has been damaged.

Access ControlAccess Control


Installing Rfid at factoriesInstalling Rfid at factories


RFID tags

1. Active Tags contain sensors, global positioning (GPS), satellite links,

other enhancements

2. Semi-active tags battery is used to power sensors volatile memory. contactless smart cards


Access ControlAccess ControlEmployee ID:Smart and SecureTradelanes (SST).Container Security Initiatives (CSI).prevent loss and possible mischief.Also contain biometric information such as a photograph.closed circuit TV (CCTV)


Vehicle ControlVehicle ControlEquipping tractors and other equipment with RFID tags.record the exact time at which a particular truck and

container entered or left the terminal.can be used to unlock fuel pumps and record fuel usage.

Asset SecurityAsset Securitysensors to monitor environmental conditions

within the container.GPS, sensors, and satellite phone capabilities to

constantly report the location of the container.satellite phone portals for commercial shippers.


Containers with RFID enable Containers with RFID enable shippers and carriers to shippers and carriers to::

Consistently monitor container security and integrity. Speed shipments through the supply chain. Verify that a container was loaded at a secure loading point. Significantly reduce the likelihood a tamper event happened in Transit with container accountability from point of origin to destination. Gather enough data to conduct a ‘virtual inspection’ in advance of arrival. Guarantee that shipping containers meet governmental security regulations. Receive fast track or ‘green lane’ handling through customs at the point of dispatch and / or the point of receipt. Avoid extensive delays in the shipment and receipt. Minimise the cost of handling.


Biometrics a possible solution toBiometrics a possible solution to improve efficiency improve efficiency


Personal identityPersonal identity


VerificationVerification


Working principleWorking principle


Hand geometry technology to Hand geometry technology to improve efficiency improve efficiency


Identifies users by the shape of their hands.

The preferred technology for high-security applications.

Very reliable when combined with other forms of identification.

Hand scanners have a twenty-six bit Wiegand output format as one of the menu choices.


Implementation IssuesImplementation IssuesCard Reader Emulation.Stand Alone Access ControlPrivacy IssuesOperation by Disabled PeopleOutdoor Conditions

Dealing with Terrorist Dealing with Terrorist Threats Threats at Hotels at Hotels


Chemical Warfare Agents

Biological Warfare Agents

Dirty Bombs

Examples of HazardsExamples of Hazards

White Powder Incidents


Exclusion (Hot) Zone

Protection Level A Protection Level B

Protection Level C

Contamination Reduction (Warm) Zone

Support (Cold) Zone

Crowd Control Line

Decontamination Line

Hot Line

Access Control Points

Wind Drainage

Typically SCBA/Gas

suits

Typically Full-face/ appropriate

filter/suit or P&SA/ suit

Typically Half-mask/disposable/skin protection – if

nec.


Hot Zone Warm Zone Cold ZoneConvenient barrier to

contain primary sourceDecontamination zone

Outer cordon - control public access (& escape!)

1st zone to be createdTypically last zone to be

createdTypically 2nd zone to be

created

Entry likely before Detection, Identification,

Monitoring

Expect Monitoring of Secondary contamination

once hot zone detection and identification complete

Monitoring only to ensure contamination-free

Possibly unknown Hazards

Hazards should be identified Should be non-hazardous

Contamination from Primary Source

Contamination only from Secondary Sources

Should be contamination-free

Contamination Possibly above IDLH

Contamination should be below IDLH

Should be contamination-free

Typically use SCBA (and Gas-tight suits if

necessary)

Typically negative pressure or powered filtering respirators

and full skin protection - minimum liquid-tight.

Typically minimal if any protection: post-

decontamination clothing; possibly MFR-type respirators

as safeguard

Dynamic situationZone DescriptionZone Description


Benefits of Electronic surveillanceBenefits of Electronic surveillance Installing Night vision equipment They are good when you want to get a better look at a

specific object and then return to normal viewing

Conditions.

Have a single lens or stereo lens, depending on the model , excellent for constant viewing, such as moving around in a dark building.

Cameras with night-vision technology can send the image to a monitor for display or to a VCR for recording. When night-vision capability is desired in a permanent location, such as on a building or as part of the equipment in a helicopter, cameras are used..


Purpose of Night vision Camera’sPurpose of Night vision Camera’sTo locate enemy targets at nightFor navigation, surveillance and targetingIt reveals whether an area has been disturbed.To discover items that have been hidden by criminals,

including money, drugs and bodies. Changes to areas such as walls can be seen using

thermal imaging.


Benefits of Low lux Benefits of Low lux camera’scamera’s


High mega pixel camerasHigh mega pixel cameras IP security cameras provide optimum picture quality and better frame.

These cameras use inexpensive sensors and mechanical shutters to control exposure and time

Offers a way to increase the detailed capture within an image without sacrificing the area of the camera.


Loss and theft prevention


ROI for security equipment and ROI for security equipment and technology technology

Are my employees being honest about their hours worked

A security director can view and download incident online without having to pull the incident from the DVR.

Remote access can save a business in fleet expenses, travel expenditures, and time and resource management.

Be in multiple places at one time.

A win-win for all parties anytime, anywhere access.

Convergence opens new ROI opportunities for security providers, who are investing R&D dollars to position themselves at the forefront of the convergence revolution.


Using surveillance to prevent theftUsing surveillance to prevent theftGenerates hypothesesMonitor trendsDetect clusters and outbreaksobjectives can be met very rapidly and often more

accurately than with other reporting systems.


epc design implementation safety security totem international ltd ceo firoze zia hussain

Documents