EP-9216 Emergency Panel

OFF

ON

TESTOUTPUT

STAND-BY

MIC MIC/VOLUME

MAXMIN

EP 9216 EMERGENCY PANEL

FIRE

EP-9216_E(215.9*279.4) 05.12.13 7:14 PM 페이지2

ContentsContentsWelcome

Warning.........................................................................................................................................1Unpacking ......................................................................................................................................2

InstallationEnvironment....................................................................................................................................2Important Safety Instructions.............................................................................................................2

Features............................................................................................................................................3

Front Panel ......................................................................................................................................4

Rear Panel .......................................................................................................................................5

Suggestions for Rack Installationl ...............................................................................................7

Operating Procedure .....................................................................................................................7

Applications ....................................................................................................................................8

Block Diagram ................................................................................................................................9

Specifications ................................................................................................................................10

ServiceProcedures....................................................................................................................................11Schematic .....................................................................................................................................11Parts List .......................................................................................................................................11

Variations and Options ...............................................................................................................11

Warranty .......................................................................................................................................11

1EP-9216

EMERGENCY PANEL

WelcomeWelcomeA personal welcome to you from the management and employees of Inter-M

All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value,and we are delighted you have purchased one of our products.

We sincerely trust this product will provide years of satisfactory service, but if anything is not to your completesatisfaction, we will endeavor to make things right.

Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!

RISK OF ELECTRIC SHOCKDO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To prevent fire or shock hazard, do notexpose the unit to rain or moisture.

*Do not install this equipment in a confined space such as a book case or similar unit.*The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.*Worded: “WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be usednear water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be takenso than objects do not fall and liquids are not spilled into the enclosure through openings.”

This symbol is intended to alert the user to thepresence of uninsulated “dangerous voltage” withinthe product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.

This symbol is intended to alert the user to thepresence of important operation and maintenance(servicing) instructions in the literature accompanyingthe appliance.

Caution: To prevent electric shock do not use this (polarized) plug withan extension cord, receptacle or other outlet unless the bladescan be fully inserted to prevent blade exposure.

Attentions: Pour prévenir les chocs électriques ne pas utiliser cettefiche polarisée avec un prolongateur, une prise de couranton une autre sortie de courant, sauf si les lames peuventétre insérées à fond sans en laisser aucune partie àdécouvert.

2 EP-9216

EMERGENCY PANEL

InstallationInstallationEnvironmentNever place this product in an environment which could alter its performance or reduce its service life. Suchenvironments usually include high levels of heat, dust, moisture, and vibration.

Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wideblade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consultan electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, andthe point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.

S3125A

S3125A

UnpackingAlthough your EP-9216 is neither complicated nor difficult to operate, we recommend you take a few minutes toread this brief manual and familiarize yourself with the important information regarding product features, setupand operation.

As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely eventthe product must be returned for servicing, the original packaging (or reasonable equivalent) is required.

3EP-9216

EMERGENCY PANEL

FeaturesFeatures- FIRE ALARMConnect to a fire sensor for a fully functional fire alarm.

- AUTO OPERATING FUNCTIONAlarm will sound automatically on alternate floors.

- AUTO ANNOUNCEMENTMake automatic announcements during fire alarm operation.

- TEST FUNCTIONUse the test function for system tests or to conduct emergency drills.

- WORKS FLAWLESSLY WITH OTHER INTER-M PRODUCTSUse with the Inter-M ES-9116 Emergency Switcher, the Inter-M PX-9116 Matrix, and the Inter-M RG-9116Relay Group.

4 EP-9216

EMERGENCY PANEL

Front PanelFront Panel

1. FIRE INDICATORThis panel indicates when fire has been detected.

2. OUTPUT INDICATOR LEDThis LED will light when it detects a nominal output level.

3. MICROPHONE AND BUILT-IN SPEAKERThe unit contains a built-in uni-directional dynamic microphone, with a built-in speaker for convenientmonitoring and testing. When an external mic is connected and active, the built-in mic is defeated.

4. POWER/TEST SWITCHThis switch is used for powering the system on and off. This switch is also used for checking and testing thesystem. When the switch is pressed, the relevant LED lights.

5. STANDBY INDICATOR LEDThis LED will light to indicate that power has been applied to the unit, and the unit is in Standby mode.

6. MIC VOLUMEThis knob controls the mic output volume. Rotating in a clockwise direction increases volume.

OFF

ON

TESTOUTPUT

STAND-BY

MIC MIC/VOLUME

MAXMIN

EP 9216 EMERGENCY PANEL

1 2 3 4

5 6

FIRE

5EP-9216

EMERGENCY PANEL

Rear PanelRear Panel

1. DC 24V OUT TERMINALThis terminal is used for connecting to the DC 24V IN terminal of an auto-broadcasting system.

2. MATRIX CONNECTORThis multi-pin EMG jack is for the connection of an external timer, such as the Inter-M PX-9116.

3. PRE-AMP INPUT JACKThis jack is used to connect the output of a pre-amplifier.

4. REMOTE 1, 2 INPUT JACKSThese jacks are used to connect the output of a pre-amplifier to REMOTE 1 and REMOTE 2.

5. TIMER INPUT JACKThis jack is for the connection of an external timer, such as the Inter-M PW-9242N.

6. AUTO ANN INPUT JACKConnect the output of an auto broadcasting system (or a cassette deck or other line level device) to thisbalanced XLR input jack. This input is active when the AUTO ANN SELECTOR SWITCH (10) is set to external.

7. PRE OUT JACKThis balanced XLR jack carries the pre-amp out signal, and is used to make a mono connection to the mainamplifier and speakers.

8. REMOTE MIC TERMINALConnect an external microphone to this terminal. The external mic is active when the Remote Mic Switch (9) isset to External.

DC OUT24V

MATRIX

12 0

SIREN/VOLUME

PRE IN REMOTE IN 2 REMOTE IN 1 TIMER IN AUTO ANN IN PRE OUT

CONTROL OUT (TO AUTO ANN)

EXT INTAUTO. ANN

REMOTE MICMIC SW

EXT INT

NO USER SERVICEABLE PARTS INSIDE.

RISQUE DE CHOC ELECTRIQUE NE

CTRIC SHOCK, DO NOT REMOVE COVER.

REFER SERVICING TO QUALIFIED SERVICE

CAUTION;

AVIS;

TO REDUCE THE RISK OF ELE-

PERSONNEL.

PAS OUVRIR.S N

1 2 3 4 5 6 7

8 9 10 11

6 EP-9216

EMERGENCY PANEL

9. REMOTE MIC SWITCH This switch is used to set the mic mode to either External or Internal. When set to Internal, the front panel built-in mic is active. Use the External setting when you wish to connect an external microphone to the Remote MicTerminal (8), defeating the built-in mic.

10. AUTO ANN SELECTOR SWITCHThis switch is used to set the auto announcement mode to either external or internal.

11. SIREN VOLUMEThis knob controls the siren level, triggered during an emergency. Rotating in a clockwise direction increasesvolume.

7EP-9216

EMERGENCY PANEL

Suggestions for Rack InstallationSuggestions for Rack Installation1. Switch off power to the EP-9216 before installing the system.2. Connect the Inter-M PX-9116 to the MATRIX CONNECTOR (2) on the rear panel.3. Connect the PRE OUT jack (7) to the input of your main amplifier.4. Connect audio output of your auto broadcasting system to the AUTO ANN input jack (6), and the DC 24V In

jack of your auto broadcasting system to the DC 24V OUT jack (1) of the EP-9216.5. Connect the output jack of the Inter-M PW-9242N to the TIMER jack (5).6. Connect the output of your remote pre-amp to the REMOTE INPUT jack (4) and the pre-amp of the main

broadcasting system to the PRE-AMP INPUT jack (3).7. If using a remote mic, connect the microphone and switch to the rear panel REMOTE MIC TERMINAL (8) and

REMOTE MIC SWITCH (9).

Operating ProcedureOperating ProcedureSwitch off the EP-9216 Power Switch.

Select either External mode or Internal mode (10) before installing the system.

Using the TEST SWITCH, an alarm is broadcast through the built-in speaker.

Test the microphone, setting the MIC VOLUME (6) as desired.

NOTE: The Pre-Amp Input, Remote 1 and 2 Input, Timer Input, and Auto-Ann Input are sent to the PRE OUT inthe following priority.

PRIORITY INPUT SIGNAL

1 Auto-Ann

2 Timer

3 Remote 1

4 Remote 2

5 Pre-Amp

TABLE 1: MATRIX CONNECTOR PIN NO. & FUNCTION

8 EP-9216

EMERGENCY PANEL

ApplicationsApplications

PX-9116

DC OUT24V

MATRIX

12 0

SIREN/VOLUME

PRE IN REMOTE IN 2 REMOTE IN 1 TIMER IN AUTO ANN IN PRE OUT

CONTROL OUT (TO AUTO ANN)

EXT INTAUTO. ANN

REMOTE MICMIC SW

EXT INT

NO USER SERVICEABLE PARTS INSIDE.

RISQUE DE CHOC ELECTRIQUE NE

CTRIC SHOCK, DO NOT REMOVE COVER.

REFER SERVICING TO QUALIFIED SERVICE

CAUTION;

AVIS;

TO REDUCE THE RISK OF ELE-

PERSONNEL.

PAS OUVRIR.S N

EP-9216

PP-9113

PP-9113

(REMOTE 1 PRE AMPLIFIER)

(REMOTE 2 PRE AMPLIFIER)

(PRE-AMP OF MAIN BROADCASTING ROOM)

PP-9113

PA-9312

GND( )

~AC INPUT230V,50Hz

9.5W

FUSET200mAL/250V

MUTEREC OUTLINE OUT CHIME MIXER TUNER DECK AUX CD PHONO MIC 6 MIC 5 MIC 4 MIC 3 MIC 2 MIC 1

DC INPUT24V

GND( )

~AC INPUT230V,50Hz

9.5W

FUSET200mAL/250V

MUTEREC OUTLINE OUT CHIME MIXER TUNER DECK AUX CD PHONO MIC 6 MIC 5 MIC 4 MIC 3 MIC 2 MIC 1

DC INPUT24V

GND( )

~AC INPUT230V,50Hz

9.5W

FUSET200mAL/250V

MUTEREC OUTLINE OUT CHIME MIXER TUNER DECK AUX CD PHONO MIC 6 MIC 5 MIC 4 MIC 3 MIC 2 MIC 1

DC INPUT24V

EM RELAY TIMER SW DC OUT

DC IN

NORMAL RELAY EM SWITCH RM 1 RM 2 SPEAKER SELECTOR EMG/PANEL EXT OUT EXT IN POWER SW

(AUTO BROADCASTING SYSTEM)

REMOTE MIC/REMOTE MIC SWITCH

9EP-9216

EMERGENCY PANEL

Block DiagramBlock Diagram

10 EP-9216

EMERGENCY PANEL

SpecificationsSpecifications..............................................................0dB=0.775Vrms

- ELECTRICALOperating Modes...........................................................................................................................Auto, TestBuilt-In Microphone ...................................................................................................Uni-directional dynamicProgram Exchange Mode ...........................................................................Business, RM1, RM2, Timer, EMG.

- GENERALPower Source ...................................................................................................................................24V DCPower Consumption ................................................................................................................................4WWeight .........................................................................................................................................4kg/8.8lbDimensions ................................................................482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in

* Specifications and design subject to change without notice.

11EP-9216

EMERGENCY PANEL

ServiceService

ProceduresEnsure the problem is not related to operator error, or system devices that are external to this unit. Informationprovided in the troubleshooting portion of this manual may help with this process. Once it is certain that theproblem is related to the product contact your warranty provider as described in the warranty section of thismanual.

SchematicA Schematic is available by contacting your warranty provider.

Parts ListA Parts List is available by contacting your warranty provider.

Variations and OptionsVariations and Options

VariationsProducts supplied through legitimate sources are compatible with local AC power requirements.

Options No optional items are available for this product.

WarrantyWarranty

Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditionsof warranty for a given product may be determined first by locating the appropriate country which the productwas purchased in, then by locating the product type.

To obtain specific warranty information and available service locations contact Inter-M directly(in Korea or theUSA) or the authorized Inter-M Distributor for your specific country or region.

NOTE

MADE IN KOREADecember 2005 9007925913 A

Inter-M, Ltd. (Korea) began operations in 1983.

Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world.

Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).

The company is no longer just a Korean company, but rather a global company that is truly international in scope, with factories and offices in Korea and China, and sales and marketing operations located in Japan, Europe, and the U.S.A.

With more than 850 employees around the globe,Inter-M is well-poised for further growth and expansion.

INTER-M AMERICAS, INC. 1 EAST BEACON LIGHT LANE CHESTER, PA USA 19013-4409TEL : 1-610-874-8870, FAX : 1-610-874-8890

INTER-M CorporationSEOUL OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA TEL : 82-2-2289-8140~8, FAX : 82-2-2289-8149

EP-9216_E(215.9*279.4) 05.12.13 7:14 PM 페이지1