enviroscape mural plus! - denco sales converd...enviroscape mural plus!® enviroscape mural plus! is...
TRANSCRIPT
EnviroScape Mural Plus!®
EnviroScape Mural Plus! is a PVC-free wall,window or hard surface scaping product thatis easy to install and just as easy to remove,while supporting LEED credit certification forgreen building applications.
®
EnviroScape Mural Plus! is FSC certifiedby the Rainforest Alliance. To achieve sustainable advantage over traditional vinyl and pressure-sensitive vinyl materials, this high performance and dimensionally stableproduct is paper based and incorporates 10% post-consumer waste in its construction.
Engineered to install easily and completely strippable, EnviroScape MuralPlus! also meetsthe strict California 01350
standards for indoor
air quality, a prerequisite for LEED creditcertification, and carries a class “A” firerating based upon ASTM E-84.
EnviroScape Mural HD (Heavy Duty) is a heavy duty enhanced version of our existing wallscape designed to provide an easier and more substantial installation.
Available in Smooth or Textured - for a unique embossed surface finish.
Applications
• Murals • POP signage• Wall décor • Window signage• Pole Wrap
®
®
Installation(an installation video can be viewed at www.converd.com)
- Spray water to the back of the sheetuntil thoroughly saturated, or place in a dip tray.- Gently fold the sheet with adhesive parts facing each other to keep moist and allow adhesive paste to activate.- Set aside for 3 minutes.- Unfold sheet and place onto a wall from top to bottom. - Carefully smooth out bubbles and creases using a broad smoothing brush, not a squeegee, from the middle of the sheet out.- If necessary, re-spray with water around the edges during the entire process. - Allow surface to dry to the touch and wipe off any excess adhesive using a damp cloth or sponge. - Trim the excess waste using a straight knife with a fresh blade tip.
Removal
- Spray the surface of the mural with water, allowing the water-based adhesive to relax for easier removal. - Start at the top of the image and remove a 6-8" section of the panel completely, and then continue to draw the product back on itself at a 180° degree angle until the image is completely removed. - In instances where the substrate appears to be very tightly bonded to the surface, spray more water. - Use a wet cloth to remove any remaining adhesive from surface.
(PVC-free wallscape material)
®
6.6 pt / 6.6 mil 170 < 20 95+
10 pt / 10 mil 225 <30 97+
X X X X
EnviroScape Mural Plus!®
50” x 150’ / 1.27m x 45.7m 6.6pt 3” / 6” 36 rolls / pallet
50” x 300’ / 1.27m x 91.4m 16 rolls / pallet
EnviroScape Mural® Plus!
EnviroScape Mural® Plus!HD (Heavy-Duty)
EnviroScape Mural® Plus!
EnviroScape Mural® Plus!HD - Smooth
EnviroScape Mural® Plus!HD - Textured
Technical Data
Caliper Basis Weight (gsm) Smoothness/Sheffield Opacity
Ink Capability
50” x 150’ / 1.27m x 45.7m 10pt 3” / 6” 36 rolls / pallet
50” x 300’ / 1.27m x 91.4m 16 rolls / pallet
50” x 150’ / 1.27m x 45.7m 10pt 3” / 6” 36 rolls / pallet
50” x 300’ / 1.27m x 91.4m 16 rolls / pallet
Sizes Calipers Cores Packaging
Product Availability
renew - reuse - sustain
conVerd LLC
15 Benton Drive - East Longmeadow, MA 01028 - USA Phone: +1-413-525-5050 Toll Free: 888-977-5050 Email: [email protected] • www.converd.com
Made in USA
Fax: 888-770-5060