enterpriseone xe shop floor management peoplebook · pdf fileshop floor process ˘ˇ + ......
TRANSCRIPT
EnterpriseOne XeShop Floor Management PeopleBook
September 2000
J.D. Edwards World Source Company
7601 Technology Way
Denver, CO 80237
Portions of this document were reproduced from material prepared by J.D. Edwards.
Copyright J.D. Edwards World Source Company, 2000
All Rights Reserved
SKU XeEASF
J.D. Edwards is a registered trademark of J.D. Edwards & Company. The names of all other products and services of J.D. Edwards used herein are trademarks or registered trademarks of J.D. Edwards World Source Company.
All other product names used are trademarks or registered trademarks of their respective owners.
The information in this guide is confidential and a proprietary trade secret of J.D. Edwards World Source Company. It may not be copied, distributed, or disclosed without prior written permission. This guide is subject to change without notice and does not represent a commitment on the part of J.D. Edwards & Company and/or its subsidiaries. The software described in this guide is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement. J.D. Edwards World Source Company uses automatic software disabling routines to monitor the license agreement. For more details about these routines, please refer to the technical product documentation.
OneWorld Xe (09/00)
Table of Contents
Overviews 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -���#������"�� $' ������������������������������������������������������������������������������������������
-���#�����"�����#�����������#�+�������1 ���2��������# $' ����-����#��(�#"��3����������#"#"���(����#��� $'4������������������������������������������
��#�������"�� $'!��������������������������������������������������������������������������������������������
��#���-�#���#"�� $'!������������������������������������������������������������������������������������1��#�� $'$�������������������������������������������������������������������������������������������������������5����1 �� $'$4������������������������������������������������������������������������������������������������. ��+�������1 ���2��������# $'$6��������������������������������������������������������������+�2���+��#�"�� $'$���������������������������������������������������������������������������
�"��#��2���+��#�"�� $'$%����������������������������������������������������������������������5����2���+��#�"�� $'$%����������������������������������������������������������������������)���#"#"���2���+��#�"�� $'��������������������������������������������������������������������
2��������"�� $'� ����������������������������������������������������������������������������������������1�#�5�#��������� $'�4��������������������������������������������������������������������������
System Setup
System Setup 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7���#���"���7����+"���������+����*���� �' ��������������������������������
��##"���7��2���+��#�"���-�+���#"�� �'!��������������������������������������������������������
8�+���9���8��"� �'!����������������������������������������������������������������������������������������##"���7���#������5������ �'!��������������������������������������������������������������
5���"�����#"���+���#������5������ �'%������������������������������������##"���7����� �����:�.��)�#� �'$�������������������������������������������������������������##"���7��#��������1 ����� ���� �'$�������������������������������������������������������
5���"�����#"���+�������1 ����� ���� �'$4������������������������������������##"���7��2���+��#�"������#��# �'$4��������������������������������������������������������##"���7����*����#� �'�&��������������������������������������������������������������������������
5���"�����#"���+����*����#��2�#��)��""�� �' ���������������������##"���7��)������7�"# �' �����������������������������������������������������������������������
5���"�����#"���+����*����#��)������7�"# �' 4����������������������##"���7��-#��;#�;:"���)� �#"���"� �' 4����������������������������������������������������
Work Orders and Rate Schedules
Work Orders and Rate Schedules 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7���#���"�����*���������)�#�������� � ' ��������������������������������������
���#"�����*�������)�#�������� � ' ����������������������������������������������(##���"�����5�#�:"# '%��������������������������������������������������������������������������������
Shop Floor Management
OneWorld Xe (09/00)
(##���"���)��#"���-�#��#"�� '$ ����������������������������������������������������������������(##���"�����;5����#�����8�;5����# '$6������������������������������������������������(##���"���-�#����"�#� '$&������������������������������������������������������������������������������ �� �#"������#�#���#� '$&����������������������������������������������������������������������������
1"<���:���#"�� '$&����������������������������������������������������������������������������������=�"�. ��:���#"�� '$!������������������������������������������������������������������������������
>����#"��������5�����* '$!������������������������������������������������������������������8��*����� "�������*���� '$�����������������������������������������������������������������
��#�"�����*�����?���� '�$����������������������������������������������������������������������
5���"�����#"���+��2���+��#�"�����*�����@54��$ A '����������������#�"���)�#�������� � ' !��������������������������������������������������������������������������������
5���"�����#"���+����#�0�������)�#�������� � '4$��������������������5���"�����*���������)�#�������� � '46����������������������������������������������
)���"�������5���"�� '4�����������������������������������������������������������������������5���"�����#"���+����*�����>����#"���@) $4$�A '4%������������������5"�#"����������� '&�����������������������������������������������������������������������������������
(##���"������� ����#���-�+���#"�� '&$����������������������������������������������������������
(##���"�����5�#�:"#�-�#���#"�� � '&�����������������������������������������������������������5���"�����#"���+����*�����5�#�:"# '!4��������������������������������
(##���"���)��#"���-�#��#"���-�#���#"�� � '!&������������������������������������������5���"�����#"���+����*�����)��#"���@5 $$�A '����������������������������(##���"�����;5����#�����8�;5����# '�4������������������������������������������������(##���"���-�#����"�#��-#�� '�6������������������������������������������������������������������("��"�����"� �B��.� '�!������������������������������������������������������������������������
Grade and Potency and Lot Processing
Grade and Potency and Lot Processing 4–1. . . . . . . . . . . . . . . . . . . . . . . 7���#���"���>��������5�#���� 4' ��������������������������������������������������������������
���#�"�>���C 4'4���������������������������������������������������������������������������������������������#�"�5�#����C 4'4��������������������������������������������������������������������������������������>��������5�#��������#� 4'4��������������������������������������������������������������������:�#�������"� ����#� �-#�� 4'6��������������������������������������������������������������������
7���#���"���:�#�5���"�� 4'!����������������������������������������������������������������������
7���#���"���:�#����#"�� 4'%��������������������������������������������������������������������7���#���"���:�#��#�#� 4'%������������������������������������������������������������������������
Commitments
Commitments 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ��+"�"���#�������"#���#�)� � 6'6������������������������������������������������������������������
��+"�"���#�������"#���#�2�#����+��#���-#�� 6'&����������������������������������5���"�����#"���+��-#���8����05 ��# 6'���������������������������������������
��+"�"���#�������"#���#����#� �����������+�����"#���# 6'%��������������+"�"�������"#���#��#�����*����#��:���#"�� 6'$6������������������������������������
��+"�"���#�����*����#��"��#���-#��D�)��#"���-�#��#"�� 6'$6������������5���"�����#"���+����#�0�������)��#"�� 6'$!������������������������������
��+"�"���#���:���#"����#�#�����*����#� 6'$%��������������������������������������������
Table of Contents
OneWorld Xe (09/00)
5���"�����#"���+����#�0���������*����#� 6'��������������������������+"�"���#���8���������5���#�-#���+��#���8" ��+�2�#�"� 6'�$������������
5���"�����#"���+����#�0�������8" 6'������������������������������������������+"�"���?���#�����#�������"#�-����#�����"���8��*+ �� 6'� ������
2����"�������"#���#�+��>��������5�#���� 6'�6����������������������������������������
�����#"���7�"#��+�2�����+��5�#��#�7�"# 6'�&��������������������������������������2����"�������"#���#�+�����#� ���-#�� 6'����������������������������������������
)���#"�������"#���# 6' $��������������������������������������������������������������������������������
5���"�����#"���+��)���#������E���#"#"� 6' �����������������������������
Availability and Shortages
Availability and Shortages 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2����"���(��" �." "#��-�+���#"�� &' ����������������������������������������������������������������
��+"�"���(��" �." "#���� �� �#"���+����8���� &' ������������������������������������)��"��"���5�#�(��" �." "#� &'6����������������������������������������������������������������������
5���"�����#"���+��5�#�(��" �." "#� &'!������������������������������������������)��"��"���5�#�:"#�(��" �." "#� &'$���������������������������������������������������������������
5���"�����#"���+��5�#�:"#�-�F�"� &'$$����������������������������������������2����"������#����-�+���#"�� &'$ ��������������������������������������������������������������������
:���#"������#��� &'$ ������������������������������������������������������������������������������������5���"�����#"���+�����#������*.���� &'$4��������������������������������
�����"������#����-�+���#"�� &'$6��������������������������������������������������������������5���"�����#"���+�����#����2�"�#������ &'$&������������������������������
5"�#"������#��� &'$&������������������������������������������������������������������������������������5"�#"�����������#����#��� &'$&��������������������������������������������������������5���"�����#"���+����������#����#��� &'$!������������������������������5"�#"���( ����#��� &'$!������������������������������������������������������������������������5���"�����#"���+��( ����#��� &'$!����������������������������������������������
Issues, Kanbans, and Material Movement
Issues, Material Movement, and Kanbans 7–1. . . . . . . . . . . . . . . . . . . . . -�"���2�#�"� !'%������������������������������������������������������������������������������������������������
-�"���2�#�"� �.��5�+ ��"�� !'$���������������������������������������������������������������-�"���2�#�"� �2���� � !'$�������������������������������������������������������������������������5���"�����#"���+��-����#���-���@5 $$$ A !'$ ������������������������������)����"�����������#����� !'$%������������������������������������������������������������������
5���"�����#"���+����������#����� !'������������������������������������������*"����"#��2�#�"� �2������# !'� ����������������������������������������������������������������
5���"���G��.���������#"���.��-#�� !'� ��������������������������������������������5���"�����#"���+��G��.���������#"�� !'�6������������������������������
5���"���G��.������� ��.��-#�� !'�&��������������������������������������������������������5���"�����#"���+��G��.������� � !'�!������������������������������������������
Shop Floor Management
OneWorld Xe (09/00)
Work Orders and Rate Schedules
Work Order Scheduling and Rate Schedules 8–1. . . . . . . . . . . . . . . . . . . ��*"����"#����*����������� "�� �' ����������������������������������������������������������
)��"��"�����*�����-�+���#"�� �' ������������������������������������������������������5���"�����#"���+�������1 �����*.���� �'6����������������������������
5"�#"��������� "���-�+���#"���+����*����#� �'&��������������������������������*"����"#��)���#"#"��������� � �'!��������������������������������������������������������������
������ "���-#��������5����#"���:"�� �'!������������������������������������������������5���"�����#"���+��:"��������� "�����*.���� �'$$��������������������
��F����"���)�#��.��� �"+"��#"��������� �'$$������������������������������������������5���"�����#"���+��:"�����F����"�����*.���� �'$ ��������������������
Hours and Quantities
Hours and Quantities 9–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ��#�"���?�������E���#"#"� %'6����������������������������������������������������������������������
5���"�����#"���+��?�������E���#"#"� %'%��������������������������������7���#"���?�������E���#"#"� %'$$��������������������������������������������������������������������
7���#"���?�������E���#"#"��2���� � %'$���������������������������������������������7���#"���?�������E���#"#"��.��8�#�� %'$ ����������������������������������������������
5���"�����#"���+��?�������E���#"#"��7���#� %'$4������������������)��"��"����#�#������������#"�� %'$6������������������������������������������������������������
)��"��"���#����#�#���+�?�� %'$6����������������������������������������������������������������)��"��"���#����#�#���+�E���#"#"� %'$!��������������������������������������������������������)��"��"���#����#�#���+�����#"���E���#"#"� %'$%��������������������������������������
5���"�����#"���+������#"���E���#"#��-�F�"� %'�$����������������������)��"��"���?�������E���#"#"�������#"�� %'�$��������������������������������������
Completions
Completions 10–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ���� �#"����"��#����*���� $�'!����������������������������������������������������������������
���� �#"�����*������"#���#�8��*+ ��"�� $�'�����������������������������������5���"�����#"���+����*��������� �#"���@5 $$$4A $�'$�������������������*"����"#��8��*+ �� $�'$���������������������������������������������������������������������������
���� �#"�����*�����#������8��*+ �� $�'$%����������������������������������)� ��"����� ��8��*������"������� �#"�� $�'����������������������������2����"������� �#"���#��#�7��)���"�#�)��#"�� $�'��������������������������5���"�����#"���+��)��#"��0(�� �"�)��""�� $�'�4����������������������
���� �#"���5�#"� �E���#"#"�������*���� $�'�6������������������������������������5���"�����*�����#�����������8��*+ �� $�'�&������������������������������5���"�����#"���+�������8��*+ ���@5 $$� A $�' �������������������������������5���"�����*�����#��#�7��E���#"#���#�����#"�� $�' ������������������������ �#"�����*������"#����"� "H�����������# $�' &����������������������
���� �#"���5������*���� $�' %����������������������������������������������������������������
���� �#"�����*������"#���#�8��*+ ��"�� $�'4�������������������������������������*"����"#��8��*+ �� $�'4���������������������������������������������������������������������������
Table of Contents
OneWorld Xe (09/00)
���� �#"�����*������������8��*+ �� $�'4���������������������������������)� ��"����� ��8��*������"������� �#"�� $�'44��������������������������2����"������� �#"���#��#�7��)���"�#�)��#"�� $�'46��������������������������##"���#���)������5����#�+��#�����;5����#�����8�;5����# $�'4���������������������������������������������������������������������������������
���� �#"���5�#"� �E���#"#"�������*���� $�'6�������������������������������������5���"�����*�����#�����������8��*+ �� $�'6�������������������������������5���"�����*�����#��#�7��E���#"#���#�����#"�� $�'66������������������������ �#"�����*������"#����"� "H�����������# $�'6!����������������������
���� �#"���)�#�������� � $�'& ����������������������������������������������������������������������������
5���"�����#"���+������ �#"�����*.���� $�'&6��������������������������
Work Order and Rate Schedule Information
Work Order and Rate Schedule Information 11–1. . . . . . . . . . . . . . . . . . . . ����#"��#"�����*���������)�#�������� � $$' ������������������������������������������
)��"��"�����*���������)�#�������� ���#�#� $$'4��������������������������������5���"�����#"���+��5����#"����#�#� $$'&��������������������������������������
�����"���#����#�#���+���*�����#��� ��� $$'&�����������������������������������������"���#����#�#���+�)�#�������� ��#��� ��� $$'!��������������������������������
5���"�����#"���+��8�#���)�#��� �� $$'�����������������������������������������5��"�����*���� $$'���������������������������������������������������������������������������������
5���"�����#"���+��5������� $$'%����������������������������������������������)��"��"�����*���������)�#�������� ��-�+���#"�� $$'$$����������������������������
)��"��"���5�#�7��." "#� $$'$�������������������������������������������������������������������������5���"�����#"���+��5�#�7��." "#� $$'$ ��������������������������������������������
)��"��"����������(��" �." "#� $$'$ ������������������������������������������������������������5���"�����#"���+���������(��" �." "#� $$'$4��������������������������������
)��"��"���-#���:�����-�+���#"�� $$'$6������������������������������������������������������5���"�����#"���+��-#���:�����@�����()��IA $$'$!��������������������
)��"��"����"��#���:"#�-�+���#"�� $$'$�������������������������������������������������������5���"�����#"���+������#"����"��#���-�F�"� $$'������������������������
)��"��"���5����#"���?"#�� $$'�$����������������������������������������������������������������5���"�����#"���+��5����#"���?"#�� $$'��������������������������������������
)��"��"���5����#"���:"���E���#"#"� $$'����������������������������������������������������5���"�����#"���+��:"����"��#���:"# $$'� ��������������������������������������
)��"��"���5����#"���(���:"�� $$'�4��������������������������������������������������������5���"�����#"���+��:"��������� ��)��"�� $$'�&������������������������������
)��"��"�����*����#��:��� $$'�&����������������������������������������������������������������5���"�����#"���+����*����#�������� ��)��"�� $$'������������������
)��"��"���5������� $$'��������������������������������������������������������������������������*"����"#������ �������������-�+���#"�� $$' $����������������������������������������
)��"��"������� �������������-�+���#"�� $$' $����������������������������������������5"�#"������� �������������-�+���#"�� $$' 4��������������������������������������������
5���"�����#"���+������ �0�������)���# $$' 4������������������������������*"����"#��8" ��+�2�#�"� $$' !����������������������������������������������������������������������
�����"���8" ��+�2�#�"� $$' !��������������������������������������������������������������������5���"�����#"���+��5�#�:"#������"�� $$'4$��������������������������������
5"�#"���8" ��+�2�#�"� �-�+���#"�� $$'4�������������������������������������������������������
Shop Floor Management
OneWorld Xe (09/00)
5"�#"������"�� ��:��� �8" ��+�2�#�"� $$'4 ��������������������������������������������5���"�����#"���+���"�� ��:��� �8" ��+�2�#�"� $$'4 ����������������������5"�#"�����2� #" ��� �8" ��+�2�#�"� $$'46������������������������������������������������5���"�����#"���+��2� #"� ��� �8" ��+�2�#�"� $$'46������������������������5"�#"��������7���-�+���#"�� $$'4�����������������������������������������������������5���"�����#"���+�������7���-#�� $$'4���������������������������������������
Interoperability
Interoperability 12–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . �����#"���1 �#�1" ��#��#���-�#�+������. � $�' ������������������������������������������������
��##"���7��#���1 �#�1" ����;)�+����� $�' ������������������������������������������������)���"���#��������"���5���� $�'4����������������������������������������������������������
5���"�����#"���+��-�.�����1 �#�1" �������"�� $�'4������������������)���"�"��������#"���+����<#��� ���#�� $�'6��������������������������������������������
5���"�����#"���+��-�.�����?�������E���#"#��5���� $�'&��������������������������������������������������������������������5���"�����#"���+��-�.�����-����#���-���5���� $�'&������5���"�����#"���+��-�.��������� �#"���5���� $�'&��������������5���"�����#"���+��-�.����������8��*+ ���5���� $�'!������
)��"��"�������)��""���-�.����������#"�� $�'%������������������������������������������
5���"�����#"���+��-�.�������*�����-�F�"� $�'$�������������������5���"�����#"���+��-�.�����?�������E���#"#��-�F�"� $�'$ ����5���"�����#"���+��-�.�����-����#���-���-�F�"� $�'$ ����������5���"�����#"���+��-�.��������� �#"���-�F�"� $�'$4������������������5���"�����#"���+��-�.����������8��*+ ���-�F�"� $�'$6����������
����"��������#"���#���<#��� ���#�� $�'$!����������������������������������������������������
Appendices
(�����"<�(3�:���#"�� ('$����������������������������������������������������������������������������������
�<��� �3�:���#"����� �� �#"�����*���# ('4������������������������������������:���#"���������# ('4����������������������������������������������������������������������������
��*������#�#���#� ('&����������������������������������������������������������������������������1"<���:���#"�� ('&����������������������������������������������������������������������������������=�"�. ��:���#"�� ('&������������������������������������������������������������������������������
����#"����#�#�����������#� ('!��������������������������������������������������������������1"<���:���#"�� ('!����������������������������������������������������������������������������������=�"�. ��:���#"�� ('�������������������������������������������������������������������������������
��� ���"�������#"�� ('%����������������������������������������������������������������������������� ���"��������������#�����#"�� ('$�����������������������������������������������:���#"����� �� �#"�� ('$$������������������������������������������������������������������������������
:��� �:���#"�� ('$$������������������������������������������������������������������������������������2���+��#�"���:���#"�� ('$ ������������������������������������������������������������������������ �#"���:���#"�� ('$6��������������������������������������������������������������������������5��7�"#�:���#"�� ('$!��������������������������������������������������������������������������������#� �E���������2����?�� ('$�������������������������������������������������������������#���?�� ('$�����������������������������������������������������������������������������������������
Table of Contents
OneWorld Xe (09/00)
Index
Shop Floor Management
OneWorld Xe (09/00)
1–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Overviews
�����1 ���2��������#�� �����*���� ��"�������"���#���+ ����+���#�"� "�"���#���� ��#��(���++��#"�� ��"�� ����#�������+ ������������#��#�������������"�#��.�#����������#"������#� �����#�������+ �����������������������1 ���2��������#��#������"�������++��#"�������#����"�#�"�����������"��#��"�+���#"���#��#�#����#����F�"��#������ �#�������#"���F��#�
��"���#"������"�������"���"�+���#"����.��#�����+ ������������#�"��#������+��#�"���"���#������ ���"�+���#"����.��#�����#������������������1 ���2��������#��#���"�#���#���"#���#���������������#���
����"������"#��+�#���+� ��"�������#�3
� ������������ ��
� ���������� ��
Shop Floor Management
1–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Industry Overview
��"�����#��"�#����������#��#���"���#��������#����"�#����"#��#������+ ������"�����#��-�����"#"����#�"�����#����# "����<��� ���+�#��"�� ��. ���#��#����"�����#�"��������+ ������"�����#������ �������������� �#"���#������-����#��(�#"���
����"���#������"������"#��+3
� -���#�����"�����#�����������#�+������+ ������������#
� -����#��(�#"��3����������#"#"���(����#���
Industry Environment and Concepts for Shop Floor Management
�����+ ������������#����������#������#� ��+���*�+ ����-��������+ �����������#��#�������""������������.��#�#���+ ����+���#�"� �#��������������D�+��#����(�#��"#"��� �����+ �������"��#��� "#�������"#��F�"����#��+"�"#������� "���������"#��� ���"���������"#��"�� �#"���������#"�"H�#"���������������"���"��#�� �����.�����"����*��.�������/�#;"�;#"�������+��#�"������������#�������+ ���
Shop Floor Process
����������+������ "��������#"���.��"���"#�������"���#���� �����+����#��#�������+ ���������� "��������#"���"��� ����##"����� "#"��"�"#"��������/�#"�������� ��.��������F�"�����#��������#�� ���#��
������<#�#���"�#��������������#"���.�����#� "�����*�#��#�"�"���������#�������+ ������"������#��#�������#�#��*������#"������#�������+ ���#�����#��#����#����7���#"��������#�����#�" �#��*"���#���#�#���+�/�.�����.#�"�"���#�����#���;#�;��#��"�+���#"�����������#"�����#"�"#�����������������"��#����#�����"#��#�������+ ����#����#������#�"�+���#"���F�"���.����"�������#���#�
Industry Challenges
��#����#��������#����"� "H��������#�������#�� ����#"���+�������#��� "�����+������#��2���+��#�����#�������+�#��#��#��������"���������+#��"���#���������# �������+��#���#��� ���"#������� �������*�� ��������#"�������� ��*��+��#���"�#���#"����(��"#"��� ���#��������+���"��������#��� ��������#������� �<"#���+�#�������+��#�"���#����F�"���
Shop Floor Management
1–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�#���#"�����������#������ ���#������. ��������+��#����F�"�+ �<"." "#��������" "#��#�����"������"� "H��������#��#���+�#���#������������#"#"����"���
1"#������+��#�����#����#� �#�������+ �������#�"��#������#����#����"�#�"����������#����� ���#"�"#��#��#���������#�������+ ����2���+��#��#���������#��������"��#��#�"�"�+���#"���#��#����#��+�#������������(��������#��#�������� ;�������+ ���������������+�#�������#�������+ �<". ��#���#�����������F�� "#�������#�
Industry Improvements
�����+ ���#��*"���"�� �������"#�"�������"���#�#����.��#���� ���������#"�����#�+"�"�������#"����������#��/��#����� ��+���"���"��"+"���# �"����#�#�������+ �������� ��������#����#������"#���������#�#�""�+���#"����"#����"�����"��#"��������������#�����#�#�����#���D������#��
��������+ ������#����"���.�#���#"��#���������#�� ���#��(�������������������#��������#��+�#"������#�"� ������ �.��� �����"�#��#��������#"����+#�������"#���#�����#�#����� �������(����������������#���"�+���#"���+���#���#���#���"���"��������#����#�������+ ���
�����#���� "�"��#����#��+������;�� �����������#"�"#"�����������*;"�;������������#��������#� "+����� ��������"��������#�� ��� #"��"������������#�F�� "#���+ �<"." "#���������������������������������1 ��2��������#��#������#�#�����#���D��<���#�#"����+�#�#� � ���#���#�����"���#�F�� "#����" �����"�"�������+��#�"��� ����#"���#��#��������;#"���� "��"��
Idea to Action: The Competitive Advantage
����+� ��"���#�. �����"����<��� ���+�#��"�� ���. ���"��#�������+��#�"���"���#���#��
.�"�����#"��#��#��#��" ��� ����������. ����#����#������"���#���#������#���"���#"�
#��#�����++��#���.���������. ���
�������������
������ ����������
����������� ���������
� �� ��������������
��������������������
� ������������ ����
�������������
9������������ #""#��� ���"���#����+"���." ��+���#�"�
@8�2A�������#"���+�������+��" "#��+��#�������"#���
�����#����"� �����#�"� ��8�2��������#"���+���
��+"����.�"�����"#��(����#��� ���"������"#��+
����#���*�"�������@�-5A��"����#����8�2������
��#"���
-�#���#"���"���� #""#��� ���"�������������#�����
�++"�"��#�� ���"�������������"#������.�������-5�
��"��� #�"����#���"���+����#�"� ��"������
��������"��"����#������������#"���"�� ���#"���
Industry Overview
1–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������
������������������
����������
�������"����#������������#�"��#�������+��#�"��
"���#����������������������#� ���������"#��# ��� ��
�����������"H�#"���
������� ���������� �� �
����������������������
����� ���"������"#��+��-5��"����#��� ��� ��8�2����
��#"���
������������ ���
������������������ �����
�������������� �
5����#���#"�������������#"���+���#"������"�����#"��
����������#"����""." "#���#������ ��� �"���������"H�#"���
�����#�������#���+� ��"��3
� ����" ��"�� �� �����+����������� ���+�����#����#��������#��#�����#�����
� ��#��������#���#��.������������#�"
������������ ���
��������� ����������
� � �
�����#���"�#���#�������#���#"���@.��"#�����������
F���#"#"�A���������+��#�"���������#"���������#��
.��*���������"#��D���#�"�#�������� ����#�#��#
"�+ ������#�����#�������#�������#���+� ��"��3
� ����" ��"�� �� �����+����������� ���+�����#����#��������#��#�����#�����
� ��#��������#���#��.������������#�"
�"#�������#���#"��������������#��#"���#��#���������
��*"�����������9�������� ���������#�"�#��#�����
��#"���#����������+��#�"���������#"�������"���#"+�
����"����"#���"��#��#�����.������#����5����#���#"��
���"��������#����"#��"���������#��""." "#�����
����#�.�##�����������#����""���������#��
"�+���#"�������"���������������D���������"�
��#��"�"�����#�#����#����
����������� �����
�����������������
7"���#���:���#"���)� ���������������������#��
�""." "#���+� ���#"���+�������"#���"�������.������9��
����"���#"#����#��#"� ������#"��������� "������. ���
(��������������������+��#����"#����#����#����+"���
"��#�����#"����5 ������������ ��#��"+�#�������+ ���"
�������� ���-+�"#�"�D#��� ������������ ��#��#�������
����"���#"+��� �#"����� ��"��#��������#"���#����
����� ������� ����
����������� ��������
���� ��������������
���������������
������ �
7��#��������1 �����*.�����������#���"�����*
�������*����#����������;�����"#��"#��#"���"�
���������9�������� �����"+��#�������� ��#�������#��#
�����#"����#"+"��#����������
��#�����������"���#�#������"�������� ���"������
����� "���"��#��������1 �����*.�����������
Shop Floor Management
1–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������� ���
������������������
����������������
����� � ������ ��
��� ������������������
����� ����
�����#��������#��"++���#���"#��+�������#���
#������7�2����"�� ���#�����������#���������
�������������������"#���"��#��������"�#����"#��+
�������-����#���"������#��.������#����#��
��+��������"���������"#��������������������
�"��#��"++���#���"#��+�������
�� �������� ������
�������������������
������ !����������
� �� �
����� ����������#��"�#���#"�� ���"#��#�"�;��#�
�#���������2����"#"����������E��#������� �
����������#���+� �����������������1 ��
2��������#��#������������#". ��#�"�;��#���#���
�������������"��������������"����.��#�����#����
#��"�.�"���������"����#���#�������#������#�#��"
.�"���������
1–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
System Overview
��������������������1 ���2��������#��#���"�� ����#�#�����#�"� �� ��.�������"���#���+ ����+���#�"� �"�"���#���� ��#��(���++��#"�� ��"�� ����#�������1 ���2��������#��#��������������"�#��.�#����������#"�����#� �����#�������+ ����-#�� �������#�������������#��*�����+��#�"����*������-#��#" "H����#��+���#�������+ ���#����"�#�"������������"��#�#�#��"�+���#"�������"�����#�"� ����*����#�����#"���"�#��#"���������������#"���#��#�����F�"���#������ �#��#��������#"����F��#�
System Integration
�����1 ���2��������#�"������+�������#���#��#���*�����#�����#��"�)�F�"����#�5 ���"��������<���#"���@�)5<A��#���������)5<��#������. �����#������"��#������"����#���������#�"� ������ �.��������#���� "�������#������"���#����������������� ����)5<�"�+� ��"�#���#�����������#��#�"�+���#"���"�*��#�����#����������#������� ��+�����.�"������#"����-#�"���� ���; ��������+��#�"����#���#��#�+��� "H��#�����#"�"#"��+�����������������#"���� ���"�������� ���#����<���#"����+�#����� ���
Shop Floor Management
1–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��"���#"+"��#����#���#��#���*�����#��������������)5<������#�������������#��������#������.���"#���#����#���1���<��� ����"#".�#"���)�F�"����#�5 ���"����2�#��5����#"��������� ������2�#�"� �)�F�"����#�5 ���"���� �����#��������#��������@ 4A�
���������1 ���2��������#��#���"�#���#���"#���#���������������#��#��#�*�������#�����+�"�� ����#"���"�+���#"�����"����������#�����"#���������#����������#���"�#���#"���������".���+� ��"���#�"�����"��
Product DataManagement
InventoryManagement
Payroll
Sales OrderManagement
DRP/MPS/MRP
Procurement
DRP =MPS =MRP =
Distribution Requirements PlanningMaster Production ScheduleMaterial Requirements Planning
Shop FloorManagement
QualityManagement
WarehouseManagement
CapacityRequirements
Planning
� ����5����#���#��2��������#��#������"���"�+���#"����.��#�." ��+��#�"� ����*����#���������#"���"�#��#"���
� �����"#".�#"���)�F�"����#�5 ���"����2�#��5����#"��������� ������2�#�"� �)�F�"����#�5 ���"����#������"�������#�����������������+��#�"�������#��#�����F�"���#����"�#�"������ "�������#"������� ���
� ����5�������#��#���� �������#����#���#"�� �������#������������+���.���#��#�������#"������#�����#"���"�#��#"���
� ����E�� "#��2��������#��#���� �������#����*��"#��#�#��� #���������#���+� ��"��3�
� ���#������������������������� �#����*����������#������ �
� )�������#�� ���������F���#"#"�
� 8��*+ ��� �.��������#
� ���������"#��)�F�"����#�5 ���"����#�������#�����#"���"�#��#"��+����*����������#������� ���������"#��#��� �������#�����*���#��"��� �������"�� �������#���++��#"�� ���������#��� ������������*����#��#����<"�"H�������#"����������#������ ����������
System Overview
1–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ������������2��������#��#���� �������#���"�"��#���"�*"���F��#�#������2���+��#�"����#������"���+�#�����������#����#���#�����#�����+�#��*"���"����#����������#��"#�"������������
� ������ ������2��������#��#���� �������#�������#����*���������������#����� ����������"#�����#��� ��"�+���#"���+����"#�"�#��������1 ���2��������#��#���
� ����5��� ��#���� ���"�� ����#���+���� ����D������9�������������������F���#"#"�������*��F��#��������� �����#����������#��.�#���"���;�#��������� �;�#����� ������
� ����-����#���2��������#��#���� �������#��#��*���#�"� �.�#����"����#�����#����� ���#"�������#�������+ ����9�������������"����#���"�����������"#���#������ �#�����������#��*����F���#"#"��#�������#�#��������#"��������
Shop Floor Management
1–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Features
����+� ��"�������"��" �#�#��#���+��#������" �. ��#������"��#��������1 ��2��������#��#���������+��#���������".���"����#�" �+� ��"���#�"����"��
Hours andQuantitiesTracking
Process orRouting
Instructions
Shop FloorManagement Features
Reporting Work Order orRate Schedule
Creation
ManufacturingAccounting
MaterialTracking
ProductionScheduling and
Tracking
Parts List
System Overview
1–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Hours and Quantities Tracking
9������#�����������F���#"#"��#��*"���+��#���#�����#���+� ��"��3
� ��#������#��*�#"�������F���#"#������ �#�������F���#"#���������.���*���������.����� ����
� ( ���#������#��*������������.����*����#������� ��������#�
� )��"���������� �H����*��������#��"#����#�" ������������#������������#�� ��� ���+��#���+� ��"��3
� ��#���� �.�����������"���#"��
� E���#"#������ �#�������F���#"#��������
� ��������#�� ���������F���#"#"��#������*����������������+��#�"��#���"����� �#��
Reporting
9������#������#"���+��#���#�����#���+� ��"��3
� >����#�����#�#��#����������#�� ��� ����"#��� �������� ������"��"��#��#�����"�����.�#�����#���#��
� >����#����#�������#�.��"#�������*�����#��"���#"+����#��#"� ����+��#�"������#�"�#�����#���� ��*��+��F�"�����������#
� 5"�#�����+ ���������*����������*��������#� "#��������#"��"�#��#"���+��"#��
� )��"�����" ����*� "#�#�����"#��/�.�#�#���"���#"+��F�������. ����#��*����#�������+ ����#�����������������"���"������������ �#��#�"�
Material Tracking
9������#�����#�"� �#��*"���+��#���#�����#���+� ��"��3
� ���#������#� "#���#���#"�� ��������������������*����
� (������#�" ���"�+���#"����.��#���� �������������F���#"#"�
� ����*�#������" �." "#���+�#�����������#��F�"���#������+��#��������#�"#������������#������#���� "#
� -���#�����#�#������*������"���������� ����+ ������.��*+ ����#���
� 8��*+ ���F���#"#"���+���������#�"����#������*���������#��� �.��<��������"#��������"�#�����#"��
� �"��� ���#�"� ��������#��"#��*��.�������"���+���"����#������*�����������������
Shop Floor Management
1–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��#������#��*����� �#"���#��"����#������������#�"#��������� �#��
� (##����#�����#� "#�������#"���"�#��#"���#��#�����*����������"�#����+ ���������*
� ���*������ �#�������������� "#�����#��������� �#��"�"��#���"#���������� �#����#�
� 2�"�#�"���������"#����*��������#���+���#����� �����+"���#��#���+�����+"�����"#��
� 5������*�����#��#����������;�����#���.�;�����#
� ��#��"���#����#"���+��"����#���"#������"�#����"#������*����
� >����#�����"�*"����F��#�"��#�����������2��������#��#���#�� ��#��� ���#"������������#���"����#���@#�"�������+#��#��2���+��#�"����#������#������#� "#��"#���#�����*����#���##��������������*����" �." "#�A
Manufacturing Accounting
9������#�������+��#�"���������#"���+��#���#�����#���+� ��"��3
� 5 �������#��*���#�+���#���� �.�����#�"� �������������
� �������� ��������#����"�#���#�� ���#������� �� �#������"���������#
� ���#��/���� ���#"��"��#�������� � �����#����������#�� ���#������"�������#�#������*��������#������� �
� 7��+��#�����#������#�+����;�����#�����.�;�����#���#"��
Production Scheduling and Tracking
9������#��������#"�������� "�������#��*"���+��#���#�����#���+� ��"��3
� ������ ����*����#�������#"���+����*�������#������� �����.�#�
� ���*������������� �����������#"�������� �����"�#���#�� ����� �
� 7��#����� "�������� "�����*.�����#����"�����"��#������������#������#"�������� "���"�+���#"���"���� �#"��
� �� �� �#��#�#��������� �#"�����#��+���������*�����.������#"��
� 2�"�#�"��#����#������� ���+#���"����#�;.����2)5
Work Order and Rate Schedule Creation
9������#�����*����������#������� �����#"���+��#���#�����#���+� ��"��3
� ��#����*��������#������� ������� �
System Overview
1–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���#����*����������#������� ����#���#"�� ��+���2)5�.�����"�����#"������������+���� ��������#���"����"����������� ��#�*"#�+�����. �;#�;���������#
� >����#������+ ���������*���#���#"�� ���"�� ��"���#��������# "#�������#"���"�#��#"��
� �"++���#"�#����*����������#������� ��.��#������"�"#�������#�#�
� >������*�����.��������#����.���+���<��� ���+��/�.����.�#��#����#�"���������*��������.�
� (�#���#"�� �������#�������������+���.���#��#�������#"�����#�����#"���"�#��#"���+����*����������#������� �
Process or Routing Instructions
9������#������������#"���"�#��#"���+��#���#�����#���+� ��"��3
� >����#����#"���"�#��#"�����#���#"�� �����������*�����"������
� 7����#����#"��������#��������#"���"�#��#"���+��"#������"��"��#�������#����������"#��
� �������#�����*����#��������������+�����������#"������#����#"���"�#��#"��
� 2��"+��#����F����������#�#���+����������#"������#�����#"��"�#��#"��
� 2�*���� ;#"������"+"��#"���#����#"���"�#��#"��
� �"� ���F���#"#������������� �#���������������+�����������#"��
Parts List
9������#�����#� "#�+��#���#�����#���+� ��"��3
� >����#������#� "#���#���#"�� �����������*�����"�������
� ���������<"#"���." ��+���#�"� �+��#���"#����F�"���.����������*���������##����#�����#� "#�#��#���������*����
� ���������#� "#�+�������<"#"�����*����������##����"#�#����������*���
� ����"+��������������.#"#�#��"#�����F���#"#"��+����"++���#� ���#"��
� �������.#"#�#��"#�������#��"�F���#"#"�������������������������#��#����"�������#���
Shop Floor Management
1–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process Flow
����+� ��"�������"��" �#�#��� ��+�#���������"��� ����"��#��������1 ��2��������#��#����������������#���+ ���+��������#�������.��"��"����"#������*��������#������� ���������"����"#�����"����#������ �#"���
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Post Completionto Inventory
Complete SuperBackflushing
Integrate with Payroll(optional)
System Overview
1–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Tables for Shop Floor Management
����+� ��"���"��� "#��+�#���#�. ������#�������#�#��������1 ��2��������#��#��3
"� ��� �#������ ���
$%&&&'(
-���#"+"��.������� ��#���������������.�"�����"#
"�+���#"����������������������"�#"����������#����
������"�����#��#��#���#"#��
)�������� ���*+���
$%&&,-,(
���#�"�������#��#���������#����#�<#�����������#��
��� ����� �.���#���-��#��������1 ���2��������#
�#����#�"�"�����+��#�����#"���"�#��#"���#�<#�����
��*�����
�������� ����$%&-&,( 2�"�#�"��#���������#���#��+��#�������� � �����
������.������$%&-,,( ���#�"��#���#����#"��������+��#�������� � �����
�����/�������� ���
$%0&&&'(
���#�"����#�" �����#���.��#�� ���+"������*����#��
"������������������ ���
$%0&&1(
2�"�#�"����������"�+���#"����#�#���� ��#� ��� ��.��#
." ��+���#�"� ��������F���#"#"���+���������#�
+��#������#"�������� ��� ��+���#�" �+�������." �
����/� ��/�������
����2� �$%0&&1'(
���#�"��+�H���#��������#�+��/���� ���#�����#"��
� �#���#��@�����"�#����"#�A���*�����
+��������� ����$%0&&0( ���#�"����#"���"�#��#"���"�+���#"����"�� ��"��
����#"����F���������*����#������������#�������
����"���#"���
�����/������+� ����
#��� �$%0&&3(
���#�"��#��������"#��"�+���#"���+����*����#������
��.�"�����"#�����#����"+#�������++"�"�����
4���5����������������
/�� ���� �$%0&&-(
���#�"������� �.����0� ��#�"�+���#"����������." ��+
��#�"� �������#"���"�#��#"����� "��#"��������"#���#
���#� ����*�������������������#"���
6�������� ����$%0&,'( ���#�"��#����#��+�*��.����������"�#����"#�����"#���
�����*��.�����+"���#������ �"��� ���#"���������"��
���#"����F���#"#���������"#��+�������������#�����
��<#����.��#�����#� �#���*��.���"���#"+"��#"��
���.���-+�#����#����� �#���"#���+�������<#���
������#������ "�D����.��"�"�� �����
Shop Floor Management
1–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6������/����7�����
$%0&,',(
���#�"��"�+���#"���� �#���#��#���*��.���������
#�#���#����#"���F���#"#���������#������#���
�����2�����8������
$%0,&1(
���#�"��#�����*�������"������=�"�����"�#��
�"++������.�#�������#�� ���#�������#�+��������#��
#�����������#��#�#���.��"��"����+�#���������#"��
��"���
�����2�����.���5�����
9���� �$%0,&:(
���#�"��#�����#��#��#�"���#"+"����*��������. "�
�"#�� �#��"� ����.��
5����;�������
2�����/�� �+�������
$%0,&<(
���#�"��#�������+������"�+���#"���+����*�����
������.�#������.��������#�������������-������
��*�#�#"���
���*.����+������� ���
�� ����$%0,&-(
���#�"��#���� �#"���"��.�#�����"#������������#"��
"���������#�����������+�#����������#�����+�� #
�#�������#"���� ��
5�������=�������
7������$%0,&-,(
���#�"��#�����" ��F���#"#"��#��#���*���������*����
�����#������� ��������#������#�"�#�. ��+�
����� "��������F����"��������#"��� "���������*
���#��
�����2��������� �.� �
$%0,,,(
���#�"��#�����������#��F�"���.������*�����
�����2�����+������
$%0,,1(
���#�"��#���"�#��#"������"+"��+������+��#�"�����*
�����������#�������#"���#��.����+������#��"
�F�������#�����"�����*����#��"��� ���������#��
#������+���#����������
�����2��������
���� ����� �$%0,,11(
���#�"��#��� �.��#����#"������#��������*����
�����#������� ��
5������������������
�� ����$%0,,<(
���#�"����������#���#����+����*�����
����������������
$%0,-:&(
���#�"��#�����#���#"��������#"���"�#��#"���+��#��
2���+��#�"����#���
� ��������� ���
+��� �$%01-0(
���#�"��#���"�� �"��������#��+��"#������.�����
.�"�����"#�
��5*�+�*7+���� ���
$%0>,,(
���#�"��#������ �������������� �#"���"��������#��
.������
System Overview
1–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� ��$%0>'&( ���#�"��#���+����#���#��#��#�)������)�F�"����#
5 ���"���@))5A��� "��#���������#��"�#����������"���#
#��25�02)50�)5�
����������/�� ����
$%>,&&,(
���#�"��#������#��#�+��#������;#�;����#����#"���#��#
������"#�"��#���-����#���2��������#��#���
-����#������#��#��"��#�#�����#����+���#�"��"�#���#��
����#"���.�#�����-����#���2��������#������#��
�#������������ ������2��������#��5�������#�
����>���� �(�����#"���
������ ����$%>,&,( ���#�"��.�"��"�+���#"����.��#������"#�����+"����+�
"����#�������������"�#"���������������������"#��+
������
����"�����$%>,&1( 2�"�#�"������������� ��#; ��� �"�+���#"���������
��#��F���#"#"�����#������������������"�� � ���#"���
����.�������$%>,&1,( ���#�"��� �"����#��� ���#"���+�����"#���
����/�� �+�������
$%>,&>(
���#�"��"�+���#"���#��#����. ������#��� �#��"#��
���.��+�������"+"��������
.����� ����$%>,&<( ���#�"��#�����#������+��� �#�
����.������$%>,,,( ���#�"��#����#"����"#���+��� �"#���
����?� �����$%>,,:( ���#�"���������#��+��"#���#��#������#"��� �"�����
#����#"���������"��#��������1 ���2��������#
�#���
������� ��+� �� �
$%>'&&(
���#�"����#�������"�*"���������� ��"����#��������#
�F��#�
.�������7�����
�����������$%>'&1(
���#�"��#���"�+���#"���+�� ���#"����������"#���
.�"�����"#������ �#�
������� ��5���� ����
$%>',,(
���#�"��#������������F��#��+#��#���������.���
�������.����#�������"�*"�������� ��"����#�
Shop Floor Management
1–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����2������� ���
$%><&,(
���#�"��#�����*����������#������� ��"�+���#"���
������"#������.���F���#"#"�����#��� �#�� ���#"���
�����"+#������
�����2������� �������
$%><&1(
���#�"��#�<#�����"�#��#"���+�����"+"����*����
#��#����"���#"+"���.���"++���#������#����
Types of Manufacturing
������"������#���#�����+������#�.�"����������������������+"���� ��#�� ����+��#�"���"�������+�#�������3
� �"��#�
� 5���
� )���#"#"��
�"��#����������������#"#"�������+��#�"���� ����." ��+���#�"� ������#"���"�#��#"��������." ��+���#�"� ����#�"��"��"�"��� ���#����������#������������#��.� #���"���� �#"�������#� ���#��+���+"<������"�. ��F���#"#���5����#�����.��.�*��������"�#���.���. "��#��#����"�#���"��� �������. "���������#"���"�#��#"���"�� ����#�������#"���#��.���+������#��"��F�������#�����"�����*����#��"��� ���������#��#������+���#����������
( �#�����+�����+��#�"������#���#���J"#��K�+��.�#��#��������#�"� ����+"�"����������B�#�� �"#������� ������������ ��������������"��#��"�"������"#��+��������������������#��#�"��+� ���"#��+�����������." "#"����� �����#�������#�#��������1 ���2��������#��#����2�#���#��������������7�"#��+�2�����+"� ����<#�#��#���F���#"#��+"� ���������"#��+������"�#����"��#�����#�.���#�. ���"#��#���F���#"#"��������#������#��
+� ��"���#����+"� ��"��#���-#���2�#��#�. ��#�������#������1 ���2��������#��
��+�� #��� ���"����#��+��3
� ��������#�7�"#��+�2����
� 5����#"���7�"#��+�2����
� 5"����7�"#��+�2����
�����"����7�"#��+�2������� �����#�.��#����� �#��+�#���#������"#��+������
-+����������������������+��#���.� *������#������� � ����������� ������������������������"��#������������������������ ���
System Overview
1–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Discrete Manufacturing
�"��#������+��#�"���"������#�"H���.��#���+� ��"��3�
� ��*�����������������"+"��F���#"#���+���"�� ��"#���+�������"+"����� �#"�����#��
� )��#"���"�#��#"���������"���+�"���������#�����#"���
� ����#�#� �F���#"#���+�#�����*�����"����� �#����#����������#"��.�+���#������������#��#�����<#�����#"���
� ��������#������#��+#�������� ��"�����"#��#���� �����+�#�����*�����.��*+ ������#�#������� �#"����+�#�����*��������.�#��
�"��#������+��#�"���"���#��+#�������"��#���+� ��"�������+��#�"�����"�����#3
� 2�*�;#�;#��*���"����"#������"�� �����#"#"��������������.����#��
� (����+�#���J#�;���K�#�#��"�����������*�;#�;��������. �;#�;���������"���;#�;���
� �������;�++���/�.��������"�����#
�"��#������+��#�"���"�����#���������"#���������#���+� ��"��3
� ��
� 1��"#��
� � ��#��"�
� ("� ���
Process Manufacturing
5��������+��#�"���"������#�"H���.��#���+� ��"��3�
� ��*�������������� #"� ��"#����.�#����;�����#�����.�;�����#�+�������"+"������ �#"�����#��
� )��#"���"�#��#"���������"���+���������#�����#"���#��#���*#���#������#"���� ��
� 5����#�����+#�����������"��.�#�������"#�������#"����������
� ��������#���"����"��#�����+#���#�#���"��#����+�����"����+��� ��
� ����F���#"#"���+���������#���"����"��#��������������"���#��#��"���������#�����
� ��������#���"����"��#������#��+#���"����.����+ ��"����"#��#��� �����+�#�����*�������.��*+ ������#�#������� �#"����+�#�����*����
Shop Floor Management
1–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5��������+��#�"���"���#��+#�������#���������#���+� ��"��3
� 5�������#"��
� 1��������.������
� )�����#�"� ������� ��.�����#� ������+ �"�
�����"++���#�#�����+�����"���"�����������+��#�"������"#��+�#��+� ��"��3
"�������� ��� -��.�#�������"�����������#�"���� �������"���
#����������� �#;"H����#��"����.����� �"H��� "��
�#������� ���#���+�#����������-#������#��"�� �
����� ���"����#������#"����������#��#��� "+����� �
�+�#��������#��+#��"#����� �#"�������"�� �"#����"��#�.�
��������#"�� ��+�����"�*��� �����" �������"��
�����#��������"�#��(���;�����#�����.�;�����#� "#
�"��#�.�������#�����"���.�#�������"���
/�������� ����� ��� -�����#"�����@��+ ��A�����"����#��������#"�����"��
"�#��"�� ���<#��������"������"��#����F�"����#�#��#
����������������#��������#� "����"#�� "��#
��"�#"������"���#�����+�����+��#�"���"������#�"H��
.��#����"++"�� #���+�� ���"����������#� "�����"�����"�
F���#"#������F�� "#���"� ������"�� �"#����"��#�.�
��#� ���;.���������#����"#" �������#��
��;�����#�����.�;�����#��������� �����
���� ��#�"�����#"���������"���#����"��.�#��
����"���
�#�#��"��"�" ��#���"��#������+��#�"�������������#"#"����������+�#��J#�;����K�@+���<��� �����*�;#�;��������. �;#�;���������"���;#�;���A��"��#�.����� �����#���"���#���������7�� ���.�#��.�#���������#"���������"�����#�����F�"���<#��"�������;*���"����������"����+�F�� "#������#� �������� �����"���#������������� ���#"�#���������#�� �#�#��"�������#��*"����:�#�#��"���"�#����"� ����+�"#����"����#���� �#��:�#�#��*"���"�#����"� ����+�"#����������+����� �#�
Repetitive Manufacturing
)���#"#"�������+��#�"���"������#�"H���.��#���+� ��"��3
� )���#"#"�������+��#�"������"��#����#"�������#"��� "���#����+��" ���+�����#�
� 5����#�+��" "������"�" ����������#�������#"���"�#��#"���
� 5����#�����+#�������+��#����"�������#"������������"����F�"� ��"����#����������#�#������+���#��������#"��� "���
System Overview
1–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��*����#���#�����������������#"���.�#������ �#��������#����"�"�"H���
� )���#"#"�������+��#�"�����+"��������#"���"����"#�������������#"�����#��#�#�������#"��� � ��� ��"��#����"��#���#�.��"���#��#������+���#����." "#��#���#���� "��������"#��������+"�����#"���"�#��#"���"����"#��������#�#��� "��� ��� �"�������������+�������#� �.�"�+�.��*����� "������������"#��� ���"���"����������"���"�+���#"���"���"#��#����#�������������"���+��#����+"�����#�#�����*����#� ��� �
� ="�� �������� ���*��.�������#� ���#�"� ��������#��G��.�������#�����#��"����F���#"#"���+���������#��#����"+"��� ���#"�����#��������#"��� "��������������"�����#���"�"�"H����*;"�;����"����#�"��
Shop Floor Management
1–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
ResourceRequirements Planning
(System 33)
ERPxEnterprise Requirements Planning and Execution
Tactical Plan
Operational Plan
Execution
Rough Cut CapacityPlanning (System 33)
CapacityRequirements
Planning(System 33)
Finite Scheduler
ManufacturingAccounting (System 31)
Shop Floor Management(System 31)
Procurement(Systems 40 and 43)
Material RequirementsPlanning (System 34)
Master ProductionSchedule (System 34)
Distribution RequirementsPlanning (System 34)
Inventory Management(System 41)
Sales Order Management(Systems 40 and 42)
Forecasting (System 36)
ConfigurationManagement (System 32)
Product Costing (System 30)
Product Data Management(Systems 30 and 48)
Strategic Business Plan
System Overview
1–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Menu Overview
Shop Floor Management (G31)
Daily Processing (G3110)
Periodic Processing (G3120)
Shop Floor Management Advanced (G3131)
Shop Floor Management Setup (G3141)
� Daily Order Preparation – Discrete (G3111)
� Daily Order Reporting – Discrete (G3112)
� Daily Order Preparation – Process (G3113)
� Daily Order Reporting – Process (G3114)
� Daily Processing – Repetitive (G3115)
� Manufacturing Accounting (G3116)
� Periodic Functions – Discrete (G3121)
� Periodic Functions – Process (G3122)
� Manufacturing Accounting Periodic (G3123)
� Shop Floor Management Interoperability (G31311)
� Supplemental Data (G3132)
� Inventory Advanced – Technical Ops (G4131)
Shop Floor Management
1–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Fast Path Commands
����+� ��"���#�. �� "#�#���+�#���#����������#��#������������#������������#��������1 ���2��������#�������1���������������#��#���+�#���#���������"��#���1�#�5�#��.�<�
%� ������ ���� �����
�1� > $ �����1 ���2��������#
��5� > $$$ ��" ������5����#"���'��"��#�
��)� > $$� ��" ������)���#"���'��"��#�
��55 > $$ ��" ������5����#"���'�5���
��)5 > $$4 ��" ������)���#"���'�5���
�)8 > $$6 ��" ��5���"���'�)���#"#"��
2( > $$& 2���+��#�"���(�����#"��
5�1� > $�$ 5�"��"��1���#"���'��"��#�
5�15 > $�� 5�"��"��1���#"���'�5���
52( > $� 2���+��#�"���(�����#"���5�"��"�
(�1 > $ $ �����1 ���2��������#�(�������
��1� > $4$ �����1 ���2��������#���#��
9����������#�����*��"#��7����+"���������+���#�� ���#��+�#���#���������@�#������������15A�
System Setup
Shop Floor Management
1–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
System Setup
�����1 ���2��������#��F�"�������#����"��#���"���#����#������#��+�������1 ���2��������#�"�� ����"���#"+�"���#���������������+����*������������"�"#���#�#���������#�����������������+"�"���#���"�+���#"���������+���"��#����������������#"#"�������+��#�"������������� ���� �.���#�������+ ����� ������������*����#��
��##"���������������1 ���2��������#��#������"#��+�#���+� ��"���#�*3
� 7���#���"��������+"���������+����*����
� ��##"����������+��#�"���"�+���#"��
Before You Begin
� ��#����#���+� ��"��������"��#���-����#���2��������#��#��3
� -#���2�#�
� 8����05 ��#
See Also
� ��������������� ����������!��"������ ��"��#������������������������ ���+��"�+���#"����.��#��##"������#���-#���2�#��8����05 ��#������:�#�2�#������
� #����� $ ��������� ���#�����"��#����%����&������ ���� ���+�"�+���#"����.��#���+"�"��������+"��������
Shop Floor Management
2–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding User Defined Codes for Work Orders
2����+"� ��#�������#������1 ���2��������#������#��� �������+"��������+����*������9��������#����+"���#���������+"���������+���������+��#�"�����*�����
7����+"������������#����"��#�. ��.���#������������#�����1���<��� ���#��� $��#������������#������1 ���2��������#������������+"���������� �������#"���#�#�������#��������#"���#�#�������+��������*�����"���#"+��� �#���#��#�������������#�#�����#��"���#"+��#����"++���#�����#"��#�#���������������#���7����+"���������+����-+�������#���������#"��#�#�������������#���+���#��#������"����#�"���#"+�����������#"���#�#���������#���7����+"���������+����#����#����"� ���������������1���<��� ������������� ����#�������"��#�������#"���#�#�������+"� ��#��#�<"#�"��#��������+"���������#�. ��+���#��� $�����#�������
9������������� ������#��������"�� �������+"���������+����(+#������������������+"���������+���+������������������#����#����������������+"���������#����+"� ��#����������#��������+"���������#�. �������#���#��������+"���������"��#���7����+"���������#�. ��@1���6A�
����+� ��"��������+"�������������"����#��#��������1 ���2��������#�#��3
� ����������@��0�9A
� 5"�"#�������@��05)A
� �#�#�������@��0��A
� 5���������@��0�$A
� ��#����������@��0���������0� A
� ����#"���#�#�������@ $0��A
� �������#�#���������@��0��A
� 7�"#��+�2�����@��072A
� 5�#��#���"#������@��075A
See Also
� '���� ��%�������(������
� #����� $ ��������� ���#�����"��#����%����&������ ���� ���+���#�" ���"�+���#"����.��#������+"��������
Shop Floor Management
2–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Type Code (00/TY)
��*�����#���������@��0�9A�"��"��#��#���� �"+"��#"����+�����*������1��<��� ������*������"��#�.��#����)�������"��������"��#�.��#������
Priority Code (00/PR)
��*������"�"#�������@��05)A�"��"��#��#����"�"#���+�����*�����"�� �#"���#���#�����*�������������������+���+�������� �����������#�++��#�#�������� "������ ���"����+���*�������#����#��������������+��� ��"�"#���#���
Status Code (00/SS)
��*�����#�#�������@��0��A����".��#���#�#���+����������#�������##���"��#���������+�"�� ����#"�������*������9������������#���#�"�#����#"���+�������"���.�������#���#�#���+�����*������1��"�#�����#����#��������� ����*����������#�#��"��"��#��#��#�#�����������"�������� ���F�� "#��"����#"��������� ������*�����#��#��������#�#������"��"��#"���#��#�#���������.������������������������F�� "#��"����#"����9������� ���#�#����#���#����#���#"�� ������#��#�����*�����#�#�����������������#��"����������� �#"���#����#"���
Phase Code (00/W1)
��*���������������@��0�$A�"��"��#��#���"�� ����#�#"���������+�#����*������9��������������������#�������+��" "���+�����+����/��#���������#����#�������#"��������"�F�"���������1���<��� ���"+�"����#"�����#���"�#��� ���#��+��������#�"���#���". ��.����������#�"����"�#�"��"#�����#"�������������"�"���#�����#"���"�#��������9�������#�������#������������#��"��"��#�����" �." "#���+�#��������#�+��#�����<#� ��� ��+�"����#"���
Category Codes (00/W2 and 00/W3)
��*�������#������������������ ����������#�������#����������"�#"��.����"����������#�#���������*�����+����/��#����������#����#������#"������"�F�""���1���<��� ������������#����������#����������#������#�#�����+���. ���������#����"��#�����*�����"�� ����#�#"���������"������#�#�����"����F��#����"�#���������������#��������#������#� ���#"��������#�����*�"�#�*"���� ����
Understanding User Defined Codes for Work Orders
2–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Operation Status Code (31/OS)
��*���������#"���#�#�������@ $0��A�"��"��#��#����������#�#���+���������"���#���#���+� �����"������#"�� ������#"����1���<��� �����������#���������#��"��"��#��"+���#�"� ������.�������"��������*����.������#����#"�� ������#"������"������� ������������#�#�����"#��#���������+����#"���#��#������ ��������#"����������+ ��������� �#��"��"��#������"#�����������#�������#��#�����<#�����#"���
Document Type Code (00/DT)
9����������#����������#�#���������@��0��A�#����#���"H��������*����.���������#�#�����1���<��� �������������+"����������#�#���������#�"��"��#�����*��������#�#��������������"������-+����������#����"+����������#�#���������������*������#����#�����#�����������#�#�����+���@1"����*����A�
�������#�#�����������#����#���"H��"�+���#"����������������������#����9����������"+�����#��$���������#�#����#�����+����*���������#��"����� �0��������� �� �#"���.����#�"���#����"��#�������"�����#"��+��#������� �0�������-�� �"���)� ��"��#���2���+��#�"���5 ���"����#�������2���+��#�"���(�����#"����#������#����������#�#����#����#����������#��#����������#�#������+"����"��������#���#"��������#"���"�#��#"��@((-A������������#�/���� ���#"��#��#�������� � �����
��#��#���#��;�����#���������#�#���������+����"����������#�#����#���#�#��*� �#�F���#"#"��"��#��������+"� ���1���<��� �����#���5�#��� ���#���#���#��#��*� �#�F���#"#"��+��� ������������
Unit of Measure Code (00/UM)
�����"#���#��#�������������"��������+��#������� ���#�������� "����"#��+�����������������"#����������������������"��#���"#��+��������.�#������#�.��"���#"+"�����#����"������"#��+��������9�����#�� ���#����#�������"���#�. ���+#������������#����� ���"#��+�������������#��#���"#��+�����������
Potent Units Code (00/UP)
�����������"�������"#���#��#���#����#���#�"����#������F�"����#�5�#��#���"#����#��������+����"#��+�������+��"#����"#����#�����������#��#���"#�� �����������������. ����072�������1���<��� ���"+�����������������#���������������������#�"���� ���������#����������������>(�+���� �����������#��#���"#������������>5�+��#�����#��#��� �������������#������#��#���"#�������������#���#��5�"��#�������"� �?��� "�������
Shop Floor Management
2–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#����#������#������"#���#�+�����"#���#��#�"��#�����"#������#��#��"#��+��������"#������#�#���F���#"#��#��#����"������"#��+��������1��<��� ���"+�����"��������#�"��>5�@��#��#��� ��A��#����#��������#�"#�#�#����"������"#��+��������+�>(�@�� ��A�
2–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up Manufacturing Information
9�����#��#����"�+���#"���#��#�"��������+������+��#�"�������������"�������������+ ����� ����������+��#�"������#��#����*����#����������"#������"#��;#�; "���� �#"���"���
��##"����������+��#�"���"�+���#"������"#��+�#���+� ��"���#�*3
� ��##"������#�������������
� ��##"��������� ����� �.���#�
� ��##"������#�������+ ����� ����
� ��##"����������+��#�"������#��#
� ��##"��������*����#�
� ��##"��������������"#
� ��##"������"#��;#�; "���� �#"���"�
Before You Begin
� =�"+��#��#�� ��+�#���"#���#��#��������#����#� ���.��*��.��������.����#��������#��#�#���*��.��������.���������#��������"�#������������ ��� )�����#�������������������������� ��)�������"��#���5����#���#�2��������#�>�"���
Setting Up Standard Procedures
9��������#��������"��������@4�0�BA�#��#������#�������� ��������#�<#�+���������������7��#����#�����".����#��������������+�������#��"��#�����#"���"�#��#"���
����#����#�������������������+"#���+"���#�������������������#��#�������������+ ����������#�����"���� "���"�F�""��#��#��������#��+��#�����#�0�������)��#"���+����(+#��������+"���#�����������������������������#��#����"��#����#���������"�#"���+"� �����#�����#�0�������)��#"��+���#��"��"��#��#�����������#�����+�����������#"������#�����#"��"�#��#"���
Shop Floor Management
2–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��� ������ ����������������
1���#��������1 ���2��������#���#��������@> $4$A���������#�����5�������
$� �����*��"#��>���"��2����0)�#��������������2����0)�#��+��#���)��������
�� �����#��>���"��2����0)�#������� �#��#���+� ��"���+"� �����#��+"#�. ��*���3
� 7����+"��������
� ���"�#"��
� ������#����������#����������>���� �2�����+���#���)��������
Setting Up Manufacturing Information
2–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� ���>���� �2���������� �#��#���+� ��"���+"� ���"#��#������"�#"����+#���#�������������3
� ���"�#"��
6� � "�*��G�
&� �����#��>���"��2����0)�#���� "�*��G�
Processing Options for Standard Procedures
Defaults
1. Enter the desired System Code.
System Code ____________
Record Type ____________
Display
1. Enter a ’1’ to display Rate Text or a ’2’ to display Message Text.
Text Type ____________
2. Enter a ’1’ for 60 column display or a ’2’ for 80 column display.
Text Column Display ____________
Shop Floor Management
2–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up Employee Labor Rates
9��������#���������#��#������#�#������ �� �.���#��+��������� �������. �� $0�)����#�"����� ������#��#��#�#����#������#���� �� �#����#�� �.����#��1�����������������������+"���#����������#�����+���� �����#��##�������������#�����#������ �� �.���#��+��#������ �������/�.���#�����
-����#�� ���#"����#����#��#��#�������+"���+���������� �����������"��#����� �����)�#��+"� �����#���?�������E���#"#"����#��+��������#����� �������#��#"���#����#"������������ ��� ���������� ��#���������"�#���"������#��� ��������������� ��������� ���� ���+��"�+���#"�����#���+"� ��#�����+����#�� ���#"���
��� ������������������������
1���#��������1 ���2��������#���#��������@> $4$A����������� ����:�.��)�#��
$� �����*��"#��>���"��2����0)�#��������������2����0)�#��+��#���)��������
Setting Up Manufacturing Information
2–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� �����#��>���"��2����0)�#������� �#��#���+� ��"���+"� ������� "�*�G3
� ����
� ���"�#"��
� )�#�
������������ �������#���������.��*�������+������� ������������ �#����*��������*�����
%���� @A���������
)�#� (����������#����+"����#��"�+���#"���"��#���>����
)�#�02�����)�����#�. ��@1��$%$A�
Shop Floor Management
2–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up the Shop Floor Calendar
9���������+"���#�����*�����.�����#����������+�������.�������� .������"�������#���"��#��������1 ����� �����������#������#�"�� �����#����#��"�������+��#�"�������� ��
9�������� ����+"����� �����.���"+#�������#������#������ �����+�� "������� "��������F����"���.���"+#�"�����#"#"�������+��#�"������"+#��� ���������#�����+���)5025�02)5�
���"������� ��#������"#�������+��#�����������#"��� "���+������#��������"+#������ �������"++���#� "����+������#"�������"++���#������+�#�����*��9������"+��#�����"+#����� "������#��������1 ����� �����
-+�#��������� �����+��#���.���������#�����������"���#���#���+"�����#���#����� ������+�� #���*�����@2������#������1"���A��������*���@��#���������������A��?� "�������� ���������+"����
��� ���������� �����������������
1���#��������1 ���2��������#���#��������@> $4$A�������������1 ���� �����
9����#�������� ��������#��.��+"#� ���#"���#������#������������.���������#������#�"��������"++���#�����#����
$� �����*��"#�������� ���������� �#��#���+� ��"���+"� �3
� 8����05 ��#
� �� �����2��#�
� �� �����9��
�� ���� �#��#���+� ��"�����#"��� �+"� �3
� ��"+#�����
� � "�*�1"���#�����#��#����� �����+��#���"�+���#"���#��#�������#����
Setting Up Manufacturing Information
2–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� �����*������� �����)��""����+��������������#���"��#�"����+�#��+����"��"��#��#���#�����+�����@��*���������*�������������A������ "�*�G�
B�#�3�2���+��#�"���5 ���"������������� "�������������� ������"#������ ����+�J��K�(������"#�������#����� ���"�#��#�����������*"�������.��#���2���+��#�"���5 ���"������������� "��������
������ ��������#��� �+#�����#�����#�� ��� ���������+��#������#���������#��#������F��#���������� ��������#���"��#�����#�����*�������������*�����#��#�������+"����
%���� @A���������
8���� (������#��#������#����"��; ��� �.�"�����"#��7��#�"
�����#���+��#����.�������� ��#�#��#��"��#�����
����#���#���/�.����"��������#� ���; ��� �.�"��
��"#�@��#��"#���2�7A���.��"��#��#��"#��1���<��� �3
� 8����05 ��#�@22�7A� ���#�(�@2�7A� ���#�8�@2�7A� ��.�$� �@2�7A
8�"�����"#����"#��"�.�������#����"���; ���
.�"�����"#�
&���*� �� � � ������� ��������������� ��������������
��"������"���#"+"��#���.�������� ��#�+����"���#��
�� �������� "���-#���#�.������ "��.�"�����"#�
Shop Floor Management
2–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
���#�� ������ ��������#������"�#����"#��#����������"�"�#��
+"#�#����"�"#��+�#��������1���<��� ���$%�"��"��#�����
����.��"��"����"#��$%�@$%%���$%%%AL����"��"��#���������
.��"��"����"#�����@���������$����������A�
Processing Options for Shop Floor Calendar
Interop
1. Enter the transaction type for the interoperability transaction. If left blank, outbound interoperability processing will not be performed.
Type – Transaction ____________
2. Enter a ’1’ to write before images for outbound change transactions. If left blank, only after images will be written.
Before Image Processing ____________
Setting Up Manufacturing Constants
9����#��������+��#�"������#��#�#����"�#�"������� �.�������� ��#"�+���#"���#��#��++��#�����"���#�������#�#��������������2���+��#�"���#�����������#��#���� "#������#���2���+��#�"������#��#�)��""���+�����#���+� ��"���#�.�3�
������������
�� ����
��������#��#����"+��#���+� ��"��3
� ���#���#����#����� "��#��." �+���#�"� ��� "�����������#�#���
� ���#���������"#�#�" �#��*�� ������������#��." ��+���#�"�
� ���#���#����#������#�����;#����#"���+�����"#�����#����#"���"�#��#"�����+"����+�#�������#�"#��
5���� ��������#��#����"+�����.���+���*�����#��#�#��
� ��#�#��"�� ������#��"��������
Setting Up Manufacturing Information
2–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
/������������� ��������#��#����"+�������"����#���"�����"##������
.��*+ �����
/� ����������� ��������#��#����"+����"�������������#
�� �� �#"�����������������#�����*����#���++"�"����
"����"������������ �� �#"����"��#� �.��������������
��#"�����#"���� ��"�� ����#��������+������"������
�.���#��
/������B�-�+���#"���#��#�������+"���+������+��#�"������#��#��++��#�� �����+�#��������������2���+��#�"����#������������� ����*��������"������+� ��
��� �������������������� ����
1���#��������1 ���2��������#���#��������@> $4$A��������2���+��#�"�����#��#��
$� �����*��"#��2���+��#�"������#��#������ �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#��8����05 ��#
�� ������#��������"�#��.����0� ��#������ "�*��� ��#�
Shop Floor Management
2–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� � "�*�#���+� ��"����F�"���8�20)��#"�����#"��3
� ��':"���8�2�=� "��#"��
4� ���2���+��#�"������#��#�)��""����� "�*�#���2���+��#�"������#��##�.��������� �#��#���+� ��"�����#"��� �+"� �3
� 8��*+ �����#"��
� �#�#��+��������
6� � "�*������+�#���+� ��"���8�20)��#"�����#"��3
� :���8" ��+�2�#�"�
� 2�#��)��#"��
&� � "�*�#�����"+#�#�.�����#�������� �#��#���+� ��"���+"� �3
� ?��
� ��"+#�����
9���������#������+�����#��"<��"++���#��"+#��?�������#�����*?���5������+"� ��"��� ��#���#�#� ���#"���+�#���+"#�#�����"+#�����
!� � "�*�#�������"#���#����#� �#�.������� "�*������+�#���+� ��"������"#���#����#� ���#"��3
� 5"����:���#"��
� �� "#'���8�����.�����"�
� ����"#���#����#�
�� � "�*������+�#���+� ��"���?��0��+#�����"#���#"��3
� ?����#����#"����+�5�#�:"#
� ��+#��?���������"�#"��
� ��+#��#����#"����+�5�#�:"#
%� � "�*�#�����#"�����#"���#�.������#����� "�*������+�#���+� ��"�����#"����#"��3
� 2��"+����#�.����*����#���++"�"����
� -�� ������*����#���++��"���������
� -�� ����=���:�.����������"����#
� �� �� �#��=��������#���:�.�
� �� �� �#��=�������"��#�:�.�
� -�� ����1"<���:�.����������"����#
� �� �� �#��1"<��������#���:�.�
� �� �� �#��1"<�������"��#�:�.�
Setting Up Manufacturing Information
2–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� -�� ����=���2���"�����������"����#
� -�� ����1"<���2���"�����������"����#
$�� ����#����+����#�� ���#"�������#��"���#"+��#��������+���#"��#����#"�����#������ �#��#���+� ��"���+"� �3
� 2���"���)�#�������
� :�.��)�#�������
�������� ��� ���������� ��#���������"��#���"������#��� ��������������� ���� ��+��+�#���"�+���#"��������#"�����#"���
$$� � "�*������+�#���+� ��"�������������#"��������#����� "�*��G3
� 5����#���
� )�#�
%���� @A���������
8��*+ �����#"�� (������#��#���#��"�������#����#�����+��
����"#���#������ �����+�"����#����=� "���������3
$ ���#����#��������#� "#�.�������#����� ��
"��#�������"#���#����#� �+"� ��"��#�����.
�����2���+��#�"������#��#�#�. ��@1 ��%A�
� ���#������#� "#������"##"���#��#��� ���#"��
"��"��#���"��#�����*����#��2�#��#�. �
@1 ���&A����������#"�����F������+"� ��"��#��
8" ��+�2�#�"� �2�#��#�. ��@1 ���A���#��"��
#�����*����#��#��#�"�����
B�#�3�9�����#����#��#�����*�������#"���.�+���#��
��#� "#��-+�����������"���#�����*����������#"��
@) $4$�A��������#��#�#���5������.��5�#�:"#����
)��#"���-�#��#"�������"�����#"���#�� �#�������#�
#�����#� "#�������#"���"�#��#"����#�#�������#"���
-+�������+"����������"��� ���#"������#�����#"��
"�#��#"����#�"� ���#"������"���#��������"��
���#"�����+"����"��#�����*����#��2�#��#�. ��
�#�#��+�������� ��"�+"� �����"+"��#���#�#��.��������"�����*����
�����#��������#�.����������"��#���:"��������� "������
:"�����F����"�����*.�����������
Shop Floor Management
2–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
��':"���8�2�=� "��#"�� (����#"���#��#���#��"������#���#����#�����+��
����� "�����������#�������#��� "��#"������� ��; ���
������"�����#������������"����." ��+���#�"� �
��������������������#��#������� "��#��"#����� "��
�� ������." ��+���#�"� �����<#��� �� �����-+����
��������#�#���� "��#��"#����� "����������#��� "��#��#��
"#���"��.�#����)���#���5"�#�-�#��"#��(�� �"������
@5 �&�$A��+#������#��#��#���." ��+���#�"� �����.�+��
�������#���1�H�����#�7���#��������@5 �� 6A��
��+������)5025�02)5������#"���@5 4��A�
1���� �3
=� "���� �����3
9 9����� "��#��"#����� "���
B B��������#��� "��#��"#����� "���
1������� �3
������"+��#��#�#����#����� "��#��"#����� "����� "�*�#��
��;:"���8�2�=� "��#"�����#"��������#���8�20)��#"��
��#"�������"����-+����������#�� "�*�#�����;:"���8�2
=� "��#"�����#"����#����#���������#��� "��#��"#��
�� "���
:���8" ��+�2�#�"� (������#��#���#��"������#����������#��#���." ��+
��#�"� �����������"��#���8" ��+�2�#�"� ��������#�. �
@1 �$$A����������� ���." ��+���#�"� ���������#��
�#�������#���� ��." ��+���#�"� �����#��������������
." ��+���#�"� �
1���� �3
=� "���� �����3
9 9��� ����������
B� B��������#� ����������
8 ��* �����#����"�������+�� #��� ����+�B�
1������� �3
���������������#��#���." ��+���#�"� ��� "�*�#���:���8"
�+�2�#�"� ���#"��������#���8�20)��#"�����#"��
����"����-+����������#�� "�*�:���8" ��+�2�#�"� ��#��
������������#�������������
Setting Up Manufacturing Information
2–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
2�#��)��#"�� (����#"���#��#���#��"������#���#����#������#��
��#����#"���+�����"#���������#"�����+"����+��#��
����#�"#����8�#����#"�������#"�����+���#���)��#"��
2�#��#�. ��@1 �� A�
-+�����������#������*�+����#����#"����#�������
1 ���2��������#��#�������*�#���-#�����
)�+������#�. ��@14$�4A����;�+������#����2)��+��#��
����#�"#����-+�"#�+"�������;�+�������#�����������
#�����#����#"���+���#���)��#"���2�#����. ��@1 �� A�
-+�"#�������#�+"�������;�+�������#����#������#��
��#"�����+"����+��#�������#�"#����-+����������#������
#������*�+����#����#"����#������������#�������#
"#��D���#"���+���#���)��#"���2�#��#�. ��
1���� �3
=� "���� �����3
9 9������#�����#����#"���+�����"#����"+����
�<"#�
B B��������#�����*�+������#����#"���+��#��
"#���
1������� �3
������"+�����#���#����#�������*�+����;�+�����
�����������#����#"���+��#���"#����� "�*�#���2�#�
)��#"�����#"��������#���8�20)��#"�����#"��
����"���
��*�?���5����� �������.���+���*�����#��#�#�������+��#�"���� ��#
#��"�� ������#��"��������������#����� �� �#��#�"
�� ���.�������������+"����"��#����"+#�����$��������
�+"� �����#���2���+��#�"������#��#�)��""���+���
��"��� ���"�����"��.��*����� "�������+����
����� "���
��"+#����� (������+"���������@��0�?A�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����D���#�������������������#��#����"+#���
#������ ����D���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #��� ���
Shop Floor Management
2–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����"#���#����#� (����#"���#��#���#��"�������#����#�������"#
"����#���#������*�������������"+"��#���"����#��
���#"���#����"�������"#���#���������������#��
��#"��#��#�"�+"� ���� ��������������#�����
����"#���#���������#"���������" �. ����+� ��3
� 5"����:���#"����2�*������"#���#�#��#���"���� ���#"���"��#���.����0� ��#������#����*������"�"��#��
� �� "#;���8�����8�����"����� "#�#�����#� "#��������"#���#�#��+" �������������#��#����������#����������.����.�����"��#��+" ��F�"����#��-��#�"������#���#������#�����<#�� ���.�#"�� �.����0� ��# "#���"��#���#�. ��#��#�������+#��#��.����0� ��#����#�����*������������1��<��� �3�(:�?-�:�?�7-+�#����#���#�#�����"##"���"����#����#.����0� ��#��?-��"#��������:����#�����<#.����0� ��#��-+�"����#���"� ���"��� � ���#"���#����#�����*��#������"�"�������"#���##��#����"���� ���#"����+�#���.����0� ��#���#�����*�����������
� �� "#;���D#����8�����8�����"�����"���#"��"�"�" ��#���� "#;���8�����8�����"���.�##����#��������#����.�����.�����"��
����������#�#�������"#���#�2�#����+"� ��"��#���-#��
8����05 ��#�#�. ��#������ �@ �#����.�����<�"�#"��
��#�����#� A��������#����#����� "#;���D#����8����
8�����"����#"���
1���� �3
=� "���� �����3
$ 5"����:���#"��
� �� "#;���8�����8�����"�
�� "#;���D#����8�����8�����"�
1������� �3
������"+������"����#���"�����"##����� "�*������+�#��
+� ��"�����#"��������#�������"#���#����#�
����"��3
� 5"����:���#"��� �� "#;���8�����8�����"�� �� "#;���D#����8�����8�����"�
Setting Up Manufacturing Information
2–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
?��0��+#�����"# (����#"���#��#���#��"�������#��������1 ��
2��������#��#�������"#�"����#����������#"�����
��+� ��3
� ?�������"#���#��#����#"����+���#� "#������#�����+�������������"#���#��#�#�����#"����+�#�����#� "#��������������"#���#���"��"���++��#���#" �"����#���"�� "�����
� ��+#�����"#���#��#������������#���������"#���#�������"�#"���������#�����+�����+#�����"#���#��#�#������#"����+�#�����#� "#������#���#�����������#�������"#���#�#�����������"#���#���"���#����"�*� "#��"�#�����@5 $4$�A�+��#�����*�����������������"#���#����"��"���++��#���#" �"����#���"� "�����
� ��+#�����"#���#��#����#"����+���#� "#������#�����+������+#�����"#���#��#����#"����+#�����#� "#�������+#�����"#���#����"��"��++��#���#" �"����#���"�� "�����
����������#�#�������"#���#�2�#����+"� ��"��#��
8����05 ��#����#��#�+���#������ ��������#���
�"#���?�������"#���#��#����#"����+���#� "#�����+#
����"#���#��#������������"#���#�������"�#"��
.����������������"#���#���#�.����+�����
-+��������#�#��"���#"+���.#"#�#��"#������������#���
������������#�������#�����������"#���#��#����#"��
�+���#� "#���#"���
����������������"#�����+#��?���������"�#"�������+#
�#����#"����+�5�#�:"#������ "���"#���"��#�����#� "#����
.�����;����"##����"��#���"�#"������ "��"���#��
"����#���
1���� �3
�����#������0�+#�����"#���#"���"��#�#������ �����
"���"#���"��#�����#� "#�����.����������"##����"��#�
�"�#"������ "��"���#���"����#����=� "���������3
$ ?�������"#���#
� ��+#�����"#���#����������"#���#�����
�"�#"���@5 $4$�A
��+#�����"#���#
1������� �3
������"+������#�������������"#�"����#����� "�*����
�+�#���+� ��"�����#"��������#���?��0��+#�����"#
����"��3
� ?����#����#"����+���#� "#� ��+#��?���������"�#"���@5 $4$�A� ��+#��#����#"����+���#� "#
Shop Floor Management
2–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2��"+����#�.����*
���#���++"�"����
(����#"���#��#���#��"������#���#�����#�� ������#�
��#���������#�84�@+�� �.���++"�"����A�.�������#��
�"��#� �.���� ���@��#���������#�8$A�����#�����*
���#���++"�"����������#�+���#�����*����#��2�#�
#�. ��@1 ���&A�
1���� �3
=� "���� �����3
9 9������#����#���������#�84�
B B��������#����#����#���������#�84�
1������� �3
������#����#���������#�84��� "�*�#���2��"+����#�.�
��*����#���++"�"�������#"��������#�����#"�����#"��
����"���
-�� ������*����#���++�
"���������
(����#"���#��#���#��"������#���#�����#�� ��
"�� ������*����#���++"�"������������ �� �#"��
���������� ����"+��������"+"���#��#��������#�#�����"+�
��#�.����*����#���++"�"�����
1���� �3
=� "���� �����3
9 9���-�� ������*����#���++"�"�����
B B��������#�"�� ������*����#���++"�"�����
1������� �3
���"�� ������*����#���++"�"������� "�*�#���-�� ������*
���#���++��"������������#"��������#�����#"�����#"��
����"���
-�� ����=���:�.�
��������"����#
(����#"���#��#���#��"������#���#�����#�� ������#�
��#���������#�� �@+����"�. �� �.���������A�"��#��
-#�����#���������#�(��;���#�. ��@1 ���&A�
1���� �3
=� "���� �����3
9 9������#����#���������#�� �
B B��������#����#����#���������#�� �
1������� �3
������#����#���������#�� ��� "�*�#���-�� ����=�"�. �
:�.����������"����#���#"��������#�����#"�����#"��
����"���
Setting Up Manufacturing Information
2–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� �� �#��=�������"��#
:�.�
(����#"���#��#���#��"������#���#�����#�� ��
"�� �����"��#� �.���<�����@��#���������#�8$A�"�
#���#�#� �����#���� �� �#����"�. �� �.����������@��#
��������#�� A�
1���� �3
=� "���� �����3
9 9���-�� �����"��#� �.���<�����
B B��������#�"�� �����"��#� �.���<�����
1������� �3
���"�� �����"��#� �.���<������� "�*�#����� �� �#��=��
����"��#�:�.����#"��������#�����#"�����#"��
����"���
�� �� �#��=��������#��
:�.�
(����#"���#��#���#��"������#���#�����#�� ��
"�� �����#��� �.���<�����@��#���������#�8�A�"�
#���#�#� �����#���� �� �#����"�. ���#�����������@��#
��������#�� A�
1���� �3
=� "���� �����3
9 9���-�� �����#��� �.���<�����
B B��������#�"�� �����#��� �.���<�����
1������� �3
���"�� �����#��� �.���<������� "�*�#����� �� �#��=��
�����#���:�.����#"��������#�����#"�����#"��
����"���
-�� ����1"<���:�.�
��������"����#
(����#"���#��#���#��"������#���#�����#�� ������#�
��#���������#��4�@+��+"<��� �.���������A�"��#���-#��
��#���������#�(��;���#�. ��@1 ���&A�
1���� �3
=� "���� �����3
9 9������#����#���������#��4�
B B��������#����#����#���������#��4�
1������� �3
������#����#���������#��4��� "�*�#���-�� ����1"<��
:�.����������"����#���#"��������#�����#"�����#"��
����"���
Shop Floor Management
2–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� �� �#��1"<�������"��#
:�.�
(����#"���#��#���#��"������#���#�����#�� ��
"�� �����"��#� �.���<�����@��#���������#�8$A�"�
#���#�#� �����#���� �� �#��+"<��� �.����������@��#
��������#��4A�
1���� �3
=� "���� �����3
9 9���-�� �����"��#� �.���<�����
B B��������#�"�� �����"��#� �.���<�����
1������� �3
���"�� �����"��#� �.���<������� "�*�#����� �� �#��1"<��
����"��#�:�.����#"��������#�����#"�����#"��
����"���
�� �� �#��1"<��������#��
:�.�
(����#"���#��#���#��"������#���#�����#�� ��
"�� �����#��� �.���<�����@��#���������#�8�A�"�
#���#�#� �����#���� �� �#��+"<����#�����������@��#
��������#��4A�
1���� �3
=� "���� �����3
9 9���-�� �����#��� �.���<�����
B B��������#�"�� �����#��� �.���<�����
1������� �3
���"�� �����#��� �.���<������� "�*�#����� �� �#��1"<��
�����#���:�.����#"��������#�����#"�����#"��
����"���
-�� ����=���2���"��
��������"����#
(����#"���#��#���#��"������#���#�����#�� ������#�
��#���������#��$�@+����"�. ������"����������A�"�
#�����#���������#�#�. ��@1 ���&A�
1���� �3
=� "���� �����3
9 9������#����#���������#��$�
B B��������#����#����#���������#��$�
1������� �3
������#����#���������#��$��� "�*�#���-�� ����=��
2���"�����������"����#���#"��������#�����#"��
��#"�������"���
Setting Up Manufacturing Information
2–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-�� ����1"<���2���"��
��������"����#
(����#"���#��#���#��"������#���#�����#�� ������#�
��#���������#����@+��+"<�������"����������A�"��#��
-#�����#���������#�(��;���#�. ��@1 ���&A�
1���� �3
=� "���� �����3
9 9������#����#���������#����
B B��������#����#����#���������#����
1������� �3
������#����#���������#������ "�*�#���-�� ����1"<��
2���"�����������"����#���#"��������#�����#"��
��#"�������"���
2���"���)�#������� (������#��#����"+"��#��������+������"����#������
#����#����� �� �#����#"�����#�+������#"��#���=� "�
�� �����3
$ ��*����#��)�#��#�. ��@1 ����A����"�#�. ��"
#�����+�� #�
� �F�"����#�)�#��#�. ��@1$ �$A
:�.��)�#������� (������#��#����"+"��#��������+�� �.���#�������#��
�#����� �� �#��#�����#"�����#�+������#"��#���=� "�
�� �����3
$ ��*����#��)�#��#�. ��@1 ����A����"�#�. ��"
#�����+�� #�
� ��� �����:�.��)�#��#�. ��@1��$%$A
2���� ����#����"��#�����#"���"�#��#"���+�
#�����*����
������� (����#"���#��#���#��"������#����� ���+���������
+"� ��@��#���������#��$�#�������4A�"��#�����*
���#��)�#��#�. ��@1 ����A�����<������������#��
�#��
1���� �3
=� "���� �����3
) �<������������� ������#��@������
�� ��A�
5 �<������������� ����������#�
1������� �3
������"+�����#���#����#����<����#����������
+"� ���������#����#���� "�*��"#���5����#���)�#�
�����#���������������"���
See Also
� ���� ��� ���������� ��#��������"��#���"���������������������� ��
Shop Floor Management
2–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting Up Work Centers
9���������"�#�"������� �"�+���#"����.��#�����*����#���������������"�#��"��� �������������.���+�����"���������*�������"H�������.��*+ �� ���#"���
-+������#�#���2��"+����#�.����*����#���++"�"�����+"� ��#��9���2���+��#�"������#��#��#����#����� #"� "��#����++"�"�����+"� ���� ���.��#���"��#� �.����#�#�����#����84���#�#����@ �.���++"�"����A�"��#���-#�����#��������#�(��;���#�. ��
1�����#�0���������*����#������������������*����#��)�#��)��""���#���"�#�"��.�#��"�� �#�������+�H����� ���+������"������� �.����������"�� �#����� ���"������#����+#������#�� ��������+�H����� ���"������#���+#����+�H�������#���9�����������#��#���"�� �#����#���.�#���#�#���+�H���� ���������#�������#��+�H����� ���������������#���1�H�����#�7���#������������+� ��"���������������������������#����+�H����� ��3
� ��#���)��#"��
� :�.��)�#��=�"��������#
� �"��#�:�.���++"�"��������#
� ��#�)� ������#
1�����#�0���������*����#����������������8�"���7�"#�-�+���#"���#���"�#�"��.�"�����"#�����#��*���#�
9���B�-+����������������2��������#����������#��#������ "����*����#� ���#"����#����#���"�#�+�����"#����������2��������#�����������##�������#� "#�#������*������-+���������#������ "����*����#�� ���#"���.�+�������##��������#� "#��.�#�#�����*�����F���#"#���<�����#���F���#"#��#��#���������"��#�����*����#���#����#��������������2��������#�#�����#����"�*��F��#�+��#������"�"���F���#"#��#��+" �#�����*������F��#�
Before You Begin
� ��#����������*����#�������"��#������������ "��.�"�����"#���#���)��"���"�� ��8�"���7�"#�+��������%��� ��� �+��� ������ ���"�#����������������� ���� ���
��� ����������������
1���#��������1 ���2��������#���#��������@> $4$A����������#�0��������*����#��
$� �����*��"#����*����#���� "�*�(���
Setting Up Manufacturing Information
2–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� �����*����#��2�#��)��""�������� �#��#���+� ��"���+"� �3
� ��*����#�
� ���#�����*����#��2�#��#�.������ �#��#���+� ��"�����#"��� �+"� �3
� �"��#���>���
� �����"H�
4� � "�*�#��������"#��,���"+#�#�.��������� �#��#���+� ��"�����#"��� �+"� �3
� �#�����������"#�
� �����"#��7�2
� 2"�"���������"#�
� 2�<"���������"#�
� 8����
� ?��
� ��"+#
6� � "�*�#���?���,��++"�"�����#�.������ �#��#���+� ��"�����#"��� �+"� ������#����� "�*��G3
� E�����?��
� 2����?��
See Also
� ���� ��� � �������,��������%���#������"��#���"������#��� ��������������� ��������� ���� ��
Shop Floor Management
2–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
��*����#� (��� �������"��+"� ��#��#�"���#"+"��������#����#"#�
�"#�"����.�"���+����"����������#�#��#��*���#��1�
�<��� �����.�"�����"#��"��#�.������������ ���#"���
/�.����/��#����*����#���.��������� ��#�
9��������"�����.�"�����"#�#������������"���"���
+"<�����#����� ����������������+���������+
����"." "#�����#"����1���<��� ���#����#������"��
���#��+������������#�����. ������������#����"��. �
.��.�"�����"#�#��#��*��F�"����#�.������". �
����#���#�
����"#��+��#�"�+"� �����������#�����+��� ���#"��
.�"�����"#�+����"�����������������#��"#��
B���3������#������#���/�.����.��+��/����
��#"��"+����������#���#������ ���"��#���((-�#�. ��
�"��#���>��� (�������#����������#���������*����#���"#�"����
���� �.�"�����"#��1���<��� ��������������#�"�����
#�������"�" ������"�������#"�����#��+����� ���*
���#��#��#����#�#������.�"�����"#�
�����"H� �������.���+����� ��������*�"��#������"+"�����*
���#������#"�������#"���
�����#����� #"� "��#���)���:�.���� ���"��#���)��#"��
2�#��#�. ��@1 �� A�.������"H����"�����#"���#�
�����#��#�#� � �.�������#�
-+�#���5"���:���������"�:���8��#����#������#���#�#�
�.������+��.��*����� "����-+�#���5"���:���������"
����2��#����#������#���#�#� �����"�������+�
.��*����� "����"#���#����"+"��#"���.������"H��
&���*� �� � � ������� ��������������� ��������������
1�������1 ���2��������#3
-+����� �����#���?���+"� �����#���)��#"���)��""��
+���. ��*��#����#������#����� �����#����"��#�"�+"� �
+�� ���#"������������ "����� �� �#"���
�#�����������"#� ����#�����������"#�� ��� ��#���"����������#"��� "��
��� ������#��
�����"#��"�#�#���"����"#��������
�����"#��7�2 (���"#��+�����������#���<���#��������"#���+��
�����#"��� "����+���<��� ���#���"����"�/��#"�������
�����
2"�"���������"#� ���� ���� "�"#������"#��.��������"���#��������#"��
"������ ����#�����#�����"��� ���"����"����.�
���������#��.�������+��#���������++"�"���"�����#�
���������
�����"#��"�#�#���"����"#��������
Setting Up Manufacturing Information
2–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
2�<"���������"#� ��������� "�"#������"#��.��������"����������#"��� "��
�����#��������
�����"#��"�#�#���"����"#��������
8���� (������#��#������#���.�"�����"#����"�"#���"����
#�����"+��+�����"���.����0� ��#�#���� "��#������
���"�"����"+#�����+������*����#��
E�����?�� ����#�#� �����#��#��������"��<���#���#��.��"��F����
�#���*����#���������"���.�#�������*����#��
�����#���#���#�"��� ���"��#���-#���8�����#�. �
@14$��A��9��������� �� �#��#�"��� ����"���#���:���#"��
)� ���������������������#��"#������ �����������
���#���:���#"���)� ����������#����#������"��
����� ���#"���"#���� �� �#����� ���
2����?�� ����� ����������#��#�����F�"���#�������#������
+���#�"�����#"���#��#�����<#�����#"���"��#������
��*����#��
-+�#���)��#"���2�#���� ������. ��*��#����#��
�#"����#�����+�� #��� ���+���#�����*�������#"���
?�������#����#������#������ ����� ��+�
.��*����� "�����"�. �� ���#"���"#���
&���*� �� � � ������� ��������������� ��������������
-+����� �����#���?���+"� �����#���)��#"���)��""��
+���. ��*��#����#������#����� �����#����"��#�"�+"� �
+�� ���#"������������ "����� �� �#"���
)�� ����? ����#"����F�"���.�+����������"��� ���#"�������
�� ������#�*��.������" �. ��+���"#���� �"��� ���#"���
��"��� ���"������� ��+��*��.�����������"���"�
�����1 ���2��������#�
Shop Floor Management
2–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Work Center Master Revisions
Interop
1. Enter the transaction type for the interoperability transaction. If left blank, outbound interoperability processing will not be performed.
Type – Transaction ____________
2. Enter a ’1’ to write before images for Outbound change transactions. If left blank, only after images will be written.
Before Image Processing ____________
Versions
Manufacturing Constants (P3009) ____________ Business Units (P0006) ____________
Setting Up Resource Units
)��������"#�"�+���#"���"��"��#��#��������"#���+�����*����#��������"�������������#������#�"�"�+���#"���#��.��*����� ����*�����"������1 ���2��������#�����#���� �� �#�����" �. ������+�������"#��� ���"���
9������������ ���������#����� ���#��������#�+������� ������������ ������#"�������"#"��� ��"+#��������#"���#"����?������������#"�������#��#���)�+���)������7�"#��#����#������ �� �#��#���+����� ���.������"�+���#"���"��#�����*����#��)��""���������1 ����� ���������2���+��#�"������#��#�#�. �������#��������"#��#����������#��#������#��������� ��
)�+���)������7�"#���� �� �#��#�����*����#��������������#��#������#�����#�0�������)������7�"#�������������#������ �� �#��#����������"#�+������*����#��.�������"�+���#"���"��#�����#�0���������*����#�������������1 ����� �����+����������.������2���+��#�"������#��##�. ��@1 ��%A��9����������#����"���#����� �� �#��#��� �.����#���������"�������������#�#�������"�����#"���#������#���"++���#���#�����.������
�����#����� #"� "��#������.���+�����"�������� �����.��#�����*�����������+���#�����#�0���������*����#��+����-+�#�����*����������������#����" �. ��+���#�����#�0���������*����#��+����#����#����#�����#�����*������������+���#���2���+��#�"������#��#�#�. ��#��#�#���#�����+"���+���������*��������#��������1 ����� �����
Setting Up Manufacturing Information
2–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
)��������"#��� �� �#"���+������"������� �.��� �#���������3
� ������������������� �@�"��� ���������M�����2A
B��.���+�����"���<���*�����������
� .����������������� �@�"��� ���������M�:���8A
B��.���+���� �����<���*�����������
Before You Begin
� ��+"�����*����+��#���.�������� ��#�"��#�������+ ����� �����
��� �������� ���������
1���#��������1 ���2��������#���#��������@> $4$A����������#�0������)������7�"#�
������*��"#��)������7�"#�+�������#�����*�����#��#�������" �. ��+��������*�����"��#������"+"������#��+������*����#��
$� �����*��"#��)������7�"#������ �#��#���+� ��"���+"� �3
� 8����05 ��#
� ��*����#�
Shop Floor Management
2–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 2��#�
� 9��
�� ������"+�������"+"���"+#������ �#��#���+� ��"���+"� ������� "�*�1"��3
� ��"+#
� ��������������"�#��.����0� ��#������ "�*�(���
4� �����*����#��)������7�"#�)��""�������� �#��#���+� ��"���+"� ��+���������3
� ��#� �)������7�"#
6� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� ��*����#���++"�"����
� ��*����#��7#" "H�#"��
&� )��"���#���+� ��"���+"� �3
� ��"+#
9��������#������ ���������#����� ���"+�#�����"+#��� ���"�. ��*��(. ��*���"+#�+"� �������#�#�������+�� ��"+#�+������*����#�+�������"+"����"����+�#"���
Setting Up Manufacturing Information
2–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
��#� �)������7�"# ����#�#� ���������"#�+��#������#��
��*����#���++"�"���� (������+"������ ���#��#�"��"��#�������++"�"��# ������*
���#������#�����"��� ������ ���+��#������ �
�++"�"�����������������#������ ���"��#�"�+"� �������#��
2��"+����#�.����*����#���++"�"�����+"� ��"��#�����.
�����2���+��#�"������#��#�#�. ��@1 ��%A�"��#�#��9�
#����#������#����������#���������#�@84A�+���#��
��#��� �� �#���+���#����"��#� �.����#�@8$A�
�<��� �3�-+�#������#��#�"��#�#��9��#����� ����+�#�"�+"� �
"���N������#����"��#� �.����#�"�$���#����#������#�
��84���#���������#�+����"��#���-#�����#���������#
(��;���#�. ��@1 ���&A�
����)�+���)������7�"#�������� �����#�"��� ��
������+�� #�������� �� �#"����#��������"#��
��#�������#������ �����.���1���<��� �����#����N
��������
B�#�3������#����<���#�#��#�#�����#"���#"�����#���
+�����������#�����#�����#�� �#"���"#�#�*��#������ �#�
�������#"�����++"�"�����������#��++��#�#�#� ���#�
�++"�"�����������"��������+�#�����#�"�#���"++���#
��#���������#���++"�"�����������#��������#������#"��
��.��*������ "����+�����*�����
��*����#��7#" "H�#"�� (������#����#��#�"��"��#������"�#��"�� ������*����#�
"�.�"����������"��� ������ ���+��#������"�������-#
"�#����#"���+�#����"��#�#"����������+�������#"��
��#"�"#"��#��#���� ����������
����)�+���)������7�"#�������� �����#�"��� ��
������+�� #�������� �� �#"����#��������"#��
��#�������#������ �����.���1���<��� �����#����N
��������
See Also
� ���� ��� �+��+� &����#�������
� ������� ��,��������� ��������� ������"��#������������� ������ ��� ��� ��"���� ���� ���+��"�+���#"����.��#��+��"����������"#�+����*����#�
Shop Floor Management
2–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Work Center Resource Units
Defaults
1. Enter the Default Unit of Measure for Work Center Resource Units. If left blank, HR will be used as the default Unit of Measure.
Unit of Measure as Input ____________ Work Day Calender (P00071) ____________
Setting Up Item-to-Line Relationships
����"#��;#�; "���� �#"���"����+"���#��� "��������"������"#���"������������#��������#��+���������������.�����"#����������� "��������:"��0-#��)� �#"���"��������� �������#��������������������� �#����#��#����"��#��:"��0-#���)� �#"���"��#�. ���9���������+"�����*����#������#"���"�"���������#"��� "����-#��;#�; "���� �#"���"������� ���F�"���"+�����������#"#"������+��#�"����
��� �������������������������� ���
1���#��������1 ���2��������#���#��������@> $4$A��������:"��0-#��)� �#"���"��
$� �����*��"#��:"��0-#���)� �#"���"������� �#��#���+� ��"���+"� ������ "�*�(��3
� 8����05 ��#
� -#���B��.�
Setting Up Manufacturing Information
2–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� ���:"��0-#���)� �#"���"��)��""�������� �#��#���+� ��"���+"� ������ "�*��G3
� :"��0�� �-���#"+"�
� �����"#���������
� 7��(���+�� #�@�0$A
� ��+�� #���"+#
� ��+�� #�5�"��
9���3�5 ���"������#��������#��#�����"���#"+����#�����+�� #� "��������#���#������#���#����������"+"��#"���+���"+#�������"�������� ���� "��+��#����+�� #� "���
%���� @A���������
:"��0�� �-���#"+"� (����.��#��#���+"����������#"��� "������� ����#�" ��
��*����#������#"�������.����+"����"�"���#��� "����
�� �
�����"#��������� (����.��#��#�"��"��#������������+�#��� "��D������
��"#�����������#�������������"#���
7��(���+�� #�@�0$A (�+"� ��#��#���#��"�����"���� �#"���"��#����#��
������������+�� #��� ���
Shop Floor Management
2–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
��+�� #���"+# (������+"���������@��0�?A�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����D���#�������������������#��#����"+#���
#������ ����D���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #�
&���*� �� � � ������� ��������������� ��������������
�����#������#�"�+"� ����#�����+�� #��� �����������
��#���#��
��+�� #�5�"�� (������#��#���#��"���#���+�F�������+�#�������� ��
=� "���������3
$ 2��#� �
� ���* �
��" �
4 5����"+#�@+��+�#�����A
&���*� �� � � ������� ��������������� ��������������
�����#������#�"�+"� ����#�����+�� #��� �����������
��#���#��
Work Orders and Rate Schedules
Shop Floor Management
2–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Work Orders and Rate Schedules
��*����������#������� ������F��#�#������ �#�����"����F���#"#���+�����"+"��"#����(+#���������"+��#����F�"���"�+���#"���+��#�����*�������#������� ��������##�������"#"��� ���#��#��"#���"#�������� ����#������.�#������"����
��*����������#������� �����"#��+�#���+� ��"���#�*3
� 7���#���"�����*����������#������� �
� ��#�"�����*����������
� ��#�"����#������� �
� 5���"�����*����������#������� �
� (##���"������ ����#���"�+���#"��
Shop Floor Management
3–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Work Orders and Rate Schedules
(���*��������"#��+�����*����������������#� "#��������#"��"�#��#"����������*��������������"+"��#���F���#"#���+�#���"#����F��#������#�����#��#��#�#���F���#"#��"��F�"����������#� "#�������#"���"�#��#"�����"+��#�����������#������#"��������������#��#�����F�"���#������ �#�#�����*�����
1��5����2���+��#�"����#�����*������ ��"�� ��������;�����#����.�;�����#� "#����"� "#�"���#"+"��#��������#�����������"���#������+��#�"��������
(��#������� ��"����F��#�#������ �#�����"����F���#"#���+����"#����������"����+�#"�����������"+"�������#"��� "����)�#������� ���������"����#"#"�������+��#�"����"����"��������������"#���"�������#"�����������������"��#��������#"��� "����:"*����*�������#������� �����"#��+�����������#� "#��������#"���"�#��#"����?�������#����#�����������"+"����#�� ��#���F���#"#���+�#���"#����F��#�������#����F�"�����#���.�#�� �����"+"�#��������#"��� "���
7���#���"�����*����������#������� �����"#��+�#���+� ��"���#��"�3
� ���#"�����*��������#������� �
� (##���"�������#� "#
� (##���"�����#"���"�#��#"��
� (##���"�����;�����#�����.�;�����#
� (##���"���"�#����"�#�
� �� �� �#"�����#�#���#�
� >����#"�������������*
� 8��*����� "�������*����
Creating Work Orders or Rate Schedules
(#����"�"������*����������#������� �����"#��+��������������#� "#�������#"���"�#��#"����9����������#�������"������ ��"++���#�������+� ��L
Shop Floor Management
3–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������"������#�����������������������.�"���������"��#�������"++���#�##������#�#��#�����*�����������
� 7"���2�#�"� �)�F�"����#�5 ���"���@2)5A
� 2���� �
� 7"���"�+���#"���+������� �����
9���#�����##����#�����#� "#����#"���"�#��#"����������;�����#����.�;�����#� "#���"#�������� ����.���"���#�������5���"��������@) $4$�A����"�.�#���������� �������#��������� #"� ����*��������#������ �������"�� ���3
� 7���#"���#���#�#���+��������*��������#������� �
� ���� �"���#�����#��#�����+���++��#"�"#������*"��
� -�"���"����#��
� 5"�#"�������������*
� �� �� �#"���#��������#�+�����+"�����"#��
� ( ��"����.#"#�#��"#���#��.�����
� ���#"����������������+�������#"�������#"��
7�� ���������#��� ��+�#�����*��������#������� ������������#�����##���#�����#� "#����#"���"�#��#"����������;�����#�����.�;�����#�@"+��� "��. �A��#�����#��#�����*��������#������� ����"���#������5���"����������?�������"+����������#�������������#����#�����#� "#�����"+���.#"#�#���������#����������� ���+#���������#���.�#���������
�������������� ���##������#"���"�#��#"���#��������*��������#������ �����������"���#"+��#��������#��+����#"���#��#����F������������� ��#������"�������#"���
)���� ���+�#�����#����#��#��������#���##����#�����#� "#����#"��"�#��#"����������;�����#�����.�;�����#�@"+���� "��. �A������������+"���#����"#��+�������#�����+��.��*����� "���#�����*��������#������� ������������������#�������"�����#"���+��.�#��#�����#�0���������������#������5���"���������
(+#��������#��"���#���������#��#�����F�"���#���������#���"#���F��#����������������� ��#�����*��������#������� ������.��"��#����*��(��������� �#��"#������#�����*��������#������� ����������#�#��+� ��"��3
� -#������� �#��
� 2�#�"� ����
� E���#"#"��������
� ?����+�����"������������� �#"����<������
Understanding Work Orders and Rate Schedules
3–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9����������#����� �#"���.������#"���#��#��*���*��������#������� ���#"�"#����"#�"�"��������7"���#���+��#�����#������#�+�����+"�����"#������#��������������#�+�������"#������������� ���� �� �#����#�.�����#"�������#��*�"����#���#�������#�#��������#"��������
9���B�-+��������#���E�� "#��2��������#��#��������������*��"#��E�� "#�2��������#�#�#��� #�+� ��"����������������#������*�����"��#��3
� 7��5�+������5�+" ��#����"�#�"��#�#�+��#�������#�"#��
� 2�"�#�"������"��#�<#�#��"��"��#�������#��#�#���#�"� ������#���#�#��"#���"���#������
� ��#��#�#��� #�+��#���#�#���+"����+��#�������#�"#��
����+� ��"�������"��" �#�#��#���#��#����+���*�����+���"++���#�#����+�����+��#�"��3
Discrete Manufacturing Structure
���#������*���������
(##�������#� "#
(##�����#"��"�#��#"��
Shop Floor Management
3–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process Manufacturing Structure
���#������*���������
(##�������#� "#
(##�����#"��"�#��#"��
(##�����;�����#���.�;�����#
Understanding Work Orders and Rate Schedules
3–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Repetitive Manufacturing Structure
���#�����#������ ������
��#����������#� "#
��#����������#"��"�#��#"��
Shop Floor Management
3–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#��#�����#"��������+����#"���#�����*������������##���"���#���������*������"�#���#"���#��������"#������"����#�������#����#������������������#���"�����"�#�"��#��������������#���*��������#������� ��������
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Completion toInventory
Super Backflushing
Integrate with Payroll(optional)
Understanding Work Orders and Rate Schedules
3–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� �����%�������� �������� ���"��#���"������#��� ��������������� ��������� ���� ��
Attaching a Parts List
9����##����#�����#� "#��+#��������#������*��������#������� ���������(��#� "#�"���#�. ���+�#�����������#�����#��"�F���#"#"���F�"���#������ �#�#�����*������9��������##����#�����#� "#��"��������+�#���+� ��"�����#���3
� 2���� ����"�����#�0����������
� (�#���#"�� ����+#��#�����#"���"�#��#"�������##����������� �@��#�0����������A��.���##"���������"�����#"���"����*����)��#"��
� (�#���#"�� ����"�������5���"��
9����##��������#� "#��"���#�������5���"���������@.�#��A�#������������������� ���##��������#� "#������ ��@"�#���#"��A��1��.�#���." �����.�#����#"����#����#�����#��"�����"�����#� "#�#�����.����#��"���#���F���#"#�+��#���." �#�������"+"������#�����*������������@7����.�#���." �#����������#�����"�� ����#�"�#�����������������#��"��"���#"�����������#������������"��+"<���F���#"#"���7��.�#�����#"���"��"���#"���������������#"�� ��+���������#� ���������������#��������+��#����"�+"<���F���#"#"����.�#����A�-+�#����#���������#�+"�����.�#���"H��#��#��#�����"#����#���+� ��"���������F������#�� ���#������#��3
� �������+��#������"+"���." �#�����"#����H���.�#���F���#"#�
� �������+����#����2�." ��"#��#������"+"���F���#"#�
� �������+����#����2�." ��"#����H���.�#���F���#"#�
-+������#���"�+������#����#���������#��##��������#� "#������������#��##���#�����#� "#������ ��
8�������#��"��++��#"�����#�����������#����"�� �����"�����<� �����+���#����#� "#�+������*�����������#���"������#���F���#"#���+��������������#.��"#�����+��#����������#"��������"+���� "��. ��
Shop Floor Management
3–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"���#�. ����+"���#���#���#��#��������#�������#�#����<��� ���+#�����*�����#��#�+� ��3
5����� ����� ������ ���+�������#�"#���������.��+��#�����
��.��*�����#��+#����#�"��#"��������������#"���
5��� 7���. ����#�"� �#��#��� #�+���#��������#"��
�����������"���#�"� ���#"����+����"+"��#"��������+
���������#�"#"��#��#����*�"�"����#"�� �
C���� �����#"���+���. ����#��#�+����������#��"#�"���#�
����+� ��"���#�. ��" �#�#������ �����"����#�"�"���#���"�*��������������#"��� ��"� ��+��#���+� ��"�����������#��+�����#�"#���(��������<��� �"�.���������F���#"#���+�$��+��5���#�-#���(�
Parent Item AComponent B C D E F GQuantity Per (2) (4) (1) (12) (2) (1)Operation 10 10 10 10 25 30
Example 1: Work order with no shrink, scrap or yield
����+� ��"����<��� ��" �#�#������*������"#������"�*���������"� �3
Example 1 Parent Item AComponent B C D E F GQuantity Per 20 40 10 120 20 10Operation 10 10 10 10 25 30
Example 2: Work order with shrink
����+� ��"����<��� ��" �#�#������*������"#��$�N��"�*��������#�"#��(3
Example 2 Parent Item AComponent B C D E F GQuantity Per 22 44 11 132 22 11Operation 10 10 10 10 25 30
Understanding Work Orders and Rate Schedules
3–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Example 3: Work order with scrap
����+� ��"����<��� ��" �#�#������*������"#��$�N����������������#�>3
Example 3 Parent Item AComponent B C D E F GQuantity Per 20 40 10 120 20 11Operation 10 10 10 10 25 30
Example 4: Work order with yield
����+� ��"����<��� ��" �#�#������*������"#��%6N��"� ���#�.�#������#"��$�������63
Example 4 Parent Item AComponent B C D E F GQuantity Per 22 44 11 133 21 10Operation 10 10 10 10 25 30
Example 5: Work order with shrink, scrap, and yield
����+� ��"����<��� ��" �#�#������*������"#��$�N��"�*��������#�"#��(��$�N����������������#�>������%6N��"� �����.�#������#"���$�������63
Example 5 Parent Item AComponent B C D E F GQuantity Per 24 49 12 146 23 12Operation 10 10 10 10 25 30
Phantom Items
����2�#�"� �)�F�"����#�5 ���"���@2)5A��#���������#�� ���#������������#���"#����.�#��" �#�*��#��"��<"#�����"�#��������#�����������1 ��2��������#��#���"�� ���� ���; ��� ���������#��+�����#���"#������������##��������#� "#��5���#���"#�����������#�"H���.��#���+� ��"��3�
� ����������#�� ������.��2)5�
� ���������.������ ���; ��� ���������#�"��#���." �+��������#�"#���
� ���������.������#����+"������.���. ���"#�"��������#�"#��������#���.���. ��"���#�#��*���"��"����#������ ������.��2)5��.�#�"��������.��#�������#�
Shop Floor Management
3–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1��5����2���+��#�"����#����"#������"�#����"�#�����������.����� ���; ��� ���#���"�#����"�#���"#�"��#��������+������;�����#�@����#"#��A�
Requirements
-��#���+� ��"����<��� ���#�����#� "#���� ��"�� ����"#���8�����1������>�
Parent A
Component C(phantom)
Component D(phantom)
Component B
Component E
Component F Component G
�����#����� �� �#����������#�F���#"#"�������"���#��#�������F���#"#����#�����*�����"+�#���������"�. ��F���#"#��"#���
9���B�-+�������#"��#��#�������"���+��#���"��#���-#���2�#��#�. ��@14$�$A��#���#�����������#����<#������F���#"#���� ���#������� �����.��"+�"#��������"�� ��� ������#��#�������F�� �#����$�
-+��++"�"��#�"����#���"���#����" �. ��#�������#�����#� "#��F�"����#�+��#����*������#����#����"�� "��#�#���E���#"#��������+"� �����#�����#� "#�+�#���"#���#��#�"�"����#���� ��
���� ���#"����++�#�"��"��#��#������.���+�����#��#�����#�"��������.�+�����+#��#���#�#���#���+�������+��#�"�����*�����������#�������#��� ���#"���++�#�����+��#�����#�#��#���#�#���#���+�#�����*�����#����#��"���#�����#�� ��#��#��#�#�����#�"��F�"�������"��"��#����������������+#��#�����*����#�#���#��#��#�#�����#�"��F�"������#������"#"������.������"��"��#��#��#����#�"���������"��#��#�����*�����#�#���#�����#��#���������������#"�����.����<��� ���+�"#���#��#��F�"������#"��� ���#"����++�#��������"#��#��#����������"�����"����#"���.�+���#��������.������"��������. ���-+#����F��#�����#��+������������#�+� �.������#����������� �#"�����#���#���#�����#��#����������� �#"�����#��+��#���"#���
-+�������+"������"�*�+��#�����#���8����05 ��#�2���+��#�"�����#��+���+�#���"#����#����#���"������#�����������#��F�"����#�.��#��������#����#������#��� �������"� ���#���"�����������F���#"#��"��#��������"#����"�*+"� ��������#���"�� �����"�*���/�#���#��"+���� "��. ��������"#��� �� �#���#� "#�F���#"#"��������#"���"�#��#"���+��#�������
Understanding Work Orders and Rate Schedules
3–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� � ��� -�.!���� ���
Attaching Routing Instructions
9����##����#�����#"���"�#��#"����+#��������#������*������������)��#"��"�#��#"������"�����#�" ��.��#�#�������#"�������������#��#�����F�"��#������ �#��#���F���#"#���+�"#����F��#���+���#�������+ ����9��������##���#�����#"���"�#��#"����"��������+�#���+� ��"�����#���3�
� 2���� ����"�����#�0����������
� (�#���#"�� ����+#��#�����#� "#�"��##����������� ��@��#�0���������A��.���##"���������"�����#"���"����*�����5�#�:"#
� (�#���#"�� ����"�������5���"��
)���� ���+����#������������ ���##����#�����#"���"�#��#"��������#��.�#����������������� ���##����#���"�#��#"����#�#�������#"���#��#�����##����#�����#� "#�������#������#�����#"���"�#��#"���#����"+�"�+���#"����.��#������"#������#�����#� "#�
Outside Operations
9����"��#������#������#�����#"���"�#��#"���#��#�������� �#���.����#"������#"����-��#�"���������������#��"���#"+��#����#�����������������"���"��.�#��������#�����#�������������+��#���#�����������������#������"�#����#�����*��"#��5����������#��)���"���+���@>4 ($$A�#���)��#"���E���#"#"�������#�#��+�����#���#"�� ������������� �������#�����#��#�����#"���F���#"#"������#�#������������
Shop Floor Management
3–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Work Orders and Rate Schedules
3–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9�������� ��#��*���#�+��#�����#"�������#"��������������#����#�����#"������#"��������"#���"��#���-#���2�#���.���"���#���+� ��"���"#������.�#��#�����#���"#������.��.�+������������#�������
XXXXXXXXX *OP YYY
work order item number
constant
operation number
9�������#�����"�������"#���#�#��#���"#���"��#�����*��"#��-#�����#�+���������"#���#��" �.��������#��#���"#�����#��+�#���#�#� �����#���������������#)� ���
-+����������#��#����#�����#"�������#"��������"#���"��#���-#���2�#���#���#������#���#��#����.����#�������#�����"#������.��+��#�������#"���������#��"#����#�����������������#��;�����#���"#������.��+����#"������#"��������#��������"#���#���+"���������+����"+����������#���+"����#"�������#"�����"#����#�����" �������H�����"#���#������������+������#�� ���+��#�������#�"#���
��������"#��D�F���#"#�����#������������������#������ "��"�#��#"���������#����"#��#�������#�"�+���#"���
-+�#����#��������#����#����������������"#���#��OB��5��"��#���)� �#������+"� �����#�����#"���"�#��#"���������#����"��#���#�.���. ��#�����#��������������+��#���+� ��"�������3
� �����#������ ����#�+"������-#���2�#����-#���8����������+��#������#�"#������#�����#"���"�#��#"���#��#���������#"�������#"���
� ��������"�����#"���"��#��������"���������#"�"#��� ��������#��#���+�� "���#������������#�#���������#�#��
Attaching Co-Products and By-Products
1��5����2���+��#�"���������##������;�����#�����.�;�����#��+#�������#������*��������������;�����#�����.�;�����#�"���#"+��#���"#���#��#�� #�+���#������������#���#�������� ����������#��
9����������#���+� ��"�����#����#���##������;�����#�����.�;�����#3
� 2���� ���##����#���
� (�#���#"�� ���##����#�����+#��#���������"���#����.���##"��������"�����#"���"��#�����#�0���������*����������
Shop Floor Management
3–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� (�#���#"�� ���##����#����+���#���2)5��#���.���##"���������"����#"��
Attaching Intermediates
-�#����"�#��� �������#��#��*�#���F���#"#���+���#��#��+���������#"���"�����*����#���#������"+"��#"����9���������+"���"�#����"�#��"���"++���#���"#��+�������.��"#������.��F���#"#���9��������#��������"�#����"�#���������#"���.�#����������#���+"������"�#����"�#��+��#��� �#�����#"����9������������ ��##����"�#����"�#��
1����#��� "F�"��"�����<��� ���+����"�#����"�#������� "F�"��+����#�+�����<#��������"����+�#"���.�+���.�"����"#" ���������� #"��� "F�"��"���#��+"�"���������#��.�#�"#��������#��#�����<#�����#"���
Calculating a Start Date
(+#��������#��� ��F�"�����*�����"�+���#"������#�����*�������#�" +����#����#����� �� �#��#���#�#���#��+��#�����*�����������#����� ��� � ���#"����� ���#"��������"#�+�����"#�����+"�������#���2���+��#�"����#��+���#���� �� �#��#���#�#���#���+�����*��������#������� ��.������#������D�������#��������#����� �� �#��#���#�#���#���"����"#���#���"#��D+"<��� ���#"�����"#���"�. �� ���#"���
See Also
� � ��� -�.!���� ����+����#�" ���"�+���#"����.��#� ���#"��
Fixed Leadtime
��������"#����������*��������#������� �������+"<��� ���#"����#����#����#��"���#���#�#���#��.���"���#��� ��� � ���#"���#��.��*����� ��
1���<��� ��������#���+� ��"��3
� ��*�����������#��M�$�0$60%%
� :��� � ���#"���M�#�������
�����#��������#�#���#���+�$�0$�0%%�������#���#������ �� �#��#���#�#���#�+��#�����*��������#������� ��.���.#��#"���#��� ��� � ���#"����� ���#"�������"#��������"������#���+"<�������"�. �� ���#"���+ ����+���#����F�"����#��������#����"� ���������������"+��"#����+�#���+� ��"�������"#"������3
� ����#�#���#���"++��+���#�����#���+�#���+"#�����#"����F���������#��"#��D���#"���"�#��#"���
Understanding Work Orders and Rate Schedules
3–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��������#"����F��������#����� ����#�.���� �� �#����"��.��*����� "���
9���B������#�������� ����*����������#������� ��#��.������ �#���.�#��������+�#��������#�������.�+���#�����*��������#������� ��"�����
See Also
� ������+���� ���%�������
Variable Leadtime
-+����"#������#�����*��������#������� ���������"�. �� ���#"����#����#����#��"���#���#�#���#��.���"���#��� ���#"��������"#�#��.��*����� �������#������#���+� ��"����� �� �#"��3
@:���#"��������"#�<�����F���#"#��0��8��@"#���.� ����AA�P��#���P�F����
��*�����������
1���<��� ��������#���+� ��"��3
� ��*��������#������� ��������#��M�$�0$60%%
� :���#"��������"#�M� �����
� ��*��������#������� ��F���#"#��M�$���
� ��#���M�$����
� E�����M�%����
� �"���8�"������@�8�A�M�4�@��"#0$���A
1���#���-#���8�����#�. ��@14$��A�
� ��*������������M��
�����#����� �� �#��#���#�#���#��.������#"���.��*�#�����*"����������#������+ ����� �����+���#���������#���������*�����#�#���#��"�$�0$ 0%%�
Generating Shop Paperwork
�����������*����"#��+�#���+� ��"����"�#��#3�
� ��*��������#������� ���"#�����"#���#�#�����#� "#�����#"��"�#��#"���"�+���#"��
� ��������*�#������
Shop Floor Management
3–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 5�#� "#���#���
�����������*�����.�������#�����������������#�����*��������#������ ���"���#���.�#������������.�����"���#���.�#���������"��"�#;�� �������
Backscheduling a Work Order
������#�#���2)5��F�"�����#��+���������������� ���#��������1 ��2��������#��#����"��������� �#"�����#��+��#�����#"���"�#��#"���#��#�"���������"��#��#���2)5��F�"�����#���������#����#����"���#���#�#�����F��#�����#��#�����������#"���"��#�����#"���"�#��#"���+��#�����*�������#������� ���("��"���#���#�#������F��#�����#��+�����������#"���"�� ���.��*����� "����
8��*����� "��������#��#�#�����#�"� �"���#��+������#"����������" �. ����#����F�"�����#���1���<��� �������*����������� �#"�����#���+�1�.����$6+���#������� ��������#"���"�#��#"��������#��#�#���"#������������" .����#��+������#"����������" �. ��+���"��"������ �����#���2)5��F�"����#���+�1�.����$&�
(+#�������������+"����������*��������#������� ����#"���"�#��#"����#���#��3�
� )�#"����#�����������"#�+��#�����*����#���+�#�����#"���"�#��#"������#"����)��������"#����+��#����@#��#�"��"����������������A�.�#�����������"#��++"�"����������#" "H�#"��������#����
� �������#�������@F����������#������������A���"���#����� �� �#"��+���"#���+"<�������"�. �� ���#"���
Understanding Work Orders and Rate Schedules
3–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��� ��#�����*����#�D����"�"�����"#�����#"���#��#��#������"������#"��D����"�"�����"#��1���<��� ���"+��6N��+�#������"�����*���#�D���"#����"�����" �. ���#�������#���*����#�D���"#����" �. ��#������ ��+��#������������" ��F�� ��6N��+�"#���" ��#�#� ����"�����#��#�� ��*����#���������������6�N��+����" �. ����"#�.��#����"�� ��+�#����� �������*�����
Shop Floor Management
3–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Entering Work Order Headers
�����#������*����������������"���#"+��#���"#����"#�.����0� ��#����F���#"#�������#����F��#�����#��+��#�����*������9�������� ����#���#����#"��� �"�+���#"����������#�����""��� ��� �+��#���." ��+���#�"� ������"�#���� ��"�+���#"���
�����#����� �� �#��#���#�#���#��.�������#����F��#�����#��#��#�������#��-+�#����F��#�����#��"�.�+���#�������#���#����"���#���+"����������*�����������������������������#��������#��� �� �#��#���#�#���#��+��#����*�����"+�#����F��#�����#��"�"�����
-+�������� "�����. ����<"#����������*������#����#����"� �����������������"�������"��"��#��#��#�#����"����"++������.�#�����#�����*����#�#���#������������.�#���+�#���+� ��"��3
� ����#�#���#���+�#���+"#���#"�������#"��
� ������ �� �#���#�#���#��+��#�����*��������"���"��"��#���"++"�� #��"�.��*����� "��
��������������������#��#���������"++���#��������#�#����#��"���#"+��#���"++���#�#�����+���*���������������*���������"������������+���#�#����
7�����"���"��������������@���A�)��""���#�����#������*��������"�#���"����""��� ��� �.�3
� �� ��#"�������""��� ��� �#���##����#��#�����*����
� 2���� ����#�"������"++���#���""��� ���
9����"��#����#�#������*�#������" �." "#���+�#�����#�#��#�����������#������ �#�����*�����.�+����������#��#�����*�����
��" ����#�"�������*��������������������������#������������"������ "#���.� ��3
2����������
����������
7��#�"�+���"+����������#�� ���#��#���������+�#��
��#�������#���� ������� �#���#��������*�����
8 ��*�+"� ����������������� ������"����"�#����"#�
������*�����
Shop Floor Management
3–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����2�����7����� 7��#�"�+���#��������#�" �#��#�����*��������"�#"���
9��� ������� 7��#�"�+���#�����#��������#������"��#�<#���#��+�
�������*������B�#�����"�������"�+���#"������
���"+"��"�#��#"���+����������(������"+"��#"���#��#
������*��#��#���#�<#��" ���#��++��#�#���#�<#�#��#���
�"�"�� ���##������#��#���." ��+���#�"� �
9�������� �������#���7��(��"#�-�+���#"��������� ��#
B�#������ �#���"�����#���"������������#������#��
���� ���#��� �#��#��#������������#�����#����#���
-+���������#���������������#����#���+� ��"���"�#���#"���+��#������ �3
7+�*��5*�+�
�����������
�����"#".�#"���)�F�"����#�5 ���"����2�#�
5����#"��������� �������2�#�"� �)�F�"����#�5 ���"��
�#�������#����������������+��#�"�������#��#
����F�"���#����"�#�"������ "�������#"�������� ��
5��� �2����
���������������������
9������������#����*����������������#����� �
���������"�#���#"���� �������#������#��� �
"�+���#"���+����"#�"��#��������1 ���2��������#
��#���
Before You Begin
� ��#�#�������"�����#"���+��������#��#�����#� �����#����#��������"�+���#"������#�����������#����������"�#���"�+���#"���������#������D���#� "#�������#"���"�#��#"���
� ��#��#�����"#��+�������"��#�������"�����#"���#��#��������#�#���#���#�����+��.��*����� "���#�����#"�������#"���+��#��������
� ��#�#�������"�����#"���#��"�"#"�#����������2��������#��#��"�#���#"�������������%���+�������� "��#�����������%���+���������������� ���+��"�+���#"����.��#��##"�������������2��������#�
� ��#����#�������+ ����� �����+��#�����*������������#��#��#�#��������#"�"#���" ������"�� ��"��� ���#"������������ ��� �+��+� &����#��������
� ��#����#����������#�#����#��#��������#��"���#"+���"++���#���*����#����"��#���7����+"���������#�. ��@��0��A�
Entering Work Order Headers
3–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����"+����"�����*�����#����#�����#������#�������"�����#"����+#������� �0�������-�� �"���)� ���������"+�#��������������#�#������#��.������"���#��������������2���+��#�"����#���
� ��#������ "����*����#�� ���#"������������ ��� %���#�������
��������������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*������� "�*�(���
�� �����*�������#�" ������ �#��#���+� ��"���+"� �3�
� 8����05 ��#
� -#���B��
� � "�*�#�����#��,�E���#"#"��#�.������#�������� �#��#���+� ��"���+"� �3
� )�F��#��
� ���07�2
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� �#�#
� :�#0��"�
6� � "�*�#����#�#��,������#�.������#�������� �#��#���+� ��"�����#"��� +"� �3
Shop Floor Management
3–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �#������
� 8" �����
� )#�������
� 1��H������
� )�+�����
� ����
� 5"�"#�
� �#�#�
&� � "�*�#���(��"#"��� ���#�" �$�#�.������#�������� �#��#���+� ��"����#"��� �+"� �3
� ������#����
� 5���#���
!� � "�*�#���(��"#"��� ���#�" ���#�.������#�������� �#��#���+� ��"����#"��� �+"� �3
� )� �#���5�0��0���B��.�
� )� �#���5�0��0�����������
� ��������'�G���@)� �#������A
�� ����������"+"����#��#��������*������������(##������#�+���#��1��������
%� ���2��"���./��#��������(���;���<#�+���#���1" �������
$�� ��#��#���"�+���#"���#��#��������#�#���##����#��#�����*�����
$$� 1���#���1" �������������������,��<"#�
$�� �����*�������#�" ��� "�*��G�#������#�����*�����������
%���� @A���������
-#���B�� (����.��#��#�#����#����"���#�����"#����-#�����.��"�
��#�� �������#�"��"#������.��+���#�
1���������*������#���"#������.��"�#��������
&���*� �� � � ������� ��������������� ��������������
1���"��#����*������#���"#������.��"�#���"#��
.�"�����������
Entering Work Order Headers
3–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
)�F��#�� ������#��#��#����"#���"�#���"�����#��#������#"���"�#��.�
���� �#��
&���*� �� � � ������� ��������������� ��������������
1�������1 ���2��������#
����������������#����F��#�����#�3
� �����#����� �� �#��������#�#���#��.������#��������F��#�����#��"+������� �#��#�����#��"�#����#�#���#��+"� ��.�+���������#��#�������F��#�����#���-+����������#��� �#��#���#�#���#��#����#���������#���� �� �#�����������"#�
� �����#������ �� �#��#�������#"���#�#�������� �#����#�������"���#��#�������� "���� �#��#�������+"���
���07�2 ����F���#"#���+���"#��++��#���.��#�"�#����#"���
&���*� �� � � ������� ��������������� ��������������
1���"��#������+��#�"��3
����������������#�������F���#"#���#����#��
��� �� �#��#���+� ��"��3
� ������������#;�F�"���F���#"#"���������"#���#
� ��������#"���#�#��������� �#����#���"+�#�� ���#"��������"�. �
1�����������+��#�"��3
����F���#"#���+���;�����#�����.�;�����#���������.�
#��������
������ (������+"��������������*�
�#������ (�."�+����"�#"���#���<� �"��#���#�#���+�#�����*�����
���� (������+"���������@��0�9A�#��#�"��"��#��#��
� �"+"��#"����+�����*����������"���"��������������
9������������*�����#��������� ��#"����"#�"���+�
��*����������� �
�#�#� (������+"���������@��0��A�#��#����".��#���#�#���+��
��*�������#������� ��������"���"��������������
(���#�#���������+���%��#������%%�#"����#����#��
#����#���#"�� ������#��#�����#������ �#���
&���*� �� � � ������� ��������������� ��������������
1�������1 ���2��������#3
(�����"�����#"���+��������#�� �#�������#���
��+�� #��� ���+��#�"�+"� ��
Shop Floor Management
3–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
5"�"#� (������+"���������@��05)A�#��#�"��"��#��#���� �#"��
�"�"#���+�����*����������"���"��������������"�
� �#"���#���#�������
(�����"�����#"���+������+��� �#�������#���
��+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#��������"�#��+"� �����������*����
�������#�����#����+����������#���5�/��#���#���+���
9��������"#��������#������"���#�����+�� #��� ���
1��H������ (������#��#�"��"��#��"+�#�������"�+�H����25�02)5����
��#�� ���+��+�H�������
=� "���������3
9 9���+��H��#�������
B B��������#�+��H��#�������@��+�� #A�
8����05 ��# (������#��#������#����"��; ��� �.�"�����"#��7��#�"
�����#���+��#����.�������� ��#�#��#��"��#�����
����#���#���/�.����"��������#� ���; ��� �.�"��
��"#���.��"��#��#��"#��1���<��� �3
� 8����05 ��#�@22�7A� ���#�(�@2�7A� ���#�8�@2�7A� ��.�$� �@2�7A
8�"�����"#����"#��"�.�������#����"���; ���
.�"�����"#�
&���*� �� � � ������� ��������������� ��������������
1�������1 ���2��������#�����2���+��#�"��
(�����#"��3
��"�+"� ��"���#"+"��#���.����0� ��#�"����"���#���"#��
�"��������+�����"���#����#����#"����#�����#� "#
������#"���
:�#0��"� (����.��#��#�"���#"+"���� �#������"� ����.���(� �#�"��
������+�"#����"#��"�" �������#�"#"��
Entering Work Order Headers
3–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
������#���� (��� �������"��+"� ��#��#�"���#"+"��������#����#"#�
�"#�"����.�"���+����"����������#�#��#��*���#��1�
�<��� �����.�"�����"#��"��#�.������������ ���#"���
/�.����/��#����*����#���.��������� ��#�
9��������"�����.�"�����"#�#������������"���"����+"<��
��#����� ����������������+���������+�����"." "#�
���#"����1���<��� ���#����#������"������#��+
�����������#�����. ������������#����"��. ��.�
.�"�����"#�#��#��*��F�"����#�.������". �
����#���#�
����"#��+��#�"�+"� �����������#�����+��� ���#"��
.�"�����"#�+����"�����������������#��"#��
B�#�3������#������#���/�.����.��+��/���� ���#"�
"+����������#���#������ ���"��#���((-�#�. ��
&���*� �� � � ������� ��������������� ��������������
������+�� #�.�"�����"#�+��/���� ���#"��+��#�����*
���������.�"�����"#����#���((-�#�. ����#�.��. ��*�
��."�"�� (��.�"�""����+�����./��#�������#����."�"���������#
"�� ����������#�" ���������+�#���������#"�����#"�"#�
+������./��#�������#�
&���*� �� � � ������� ��������������� ��������������
1�������1 ���2��������#�����2���+��#�"��
(�����#"��3
-+����� ���"���#���#����"��#���((-�#�. ��+���."�"��
������#��#����#������#�"��� ���������+�� #�"��/����
��#"��
5���#��� (����.��#��#�"���#"+"��#�������#���*������9������
���#�"����.��#�����#���+� ��"��3
� ��#����+�� #��� ���+��������*�����������������5"�"#����#�#�������2�����
� >������*�����+����/��#��#����������#"��
&���*� �� � � ������� ��������������� ��������������
1�������1 ���2��������#3
9������������ ����#��#�"����.��#�����#���+� ��"��3
� -���#"+���� #" ��� ����+"�����"#���� 5��"���#�����+�� #�+����*�����+��#��� ���
���+"�����"#���@"+�������#��"#�+��#���#��; ��� ���+"�����"#��A�
� >������*�����+����/��#��#���������#"���
���B��.� (����.��#��#�"���#"+"������������������������� �
���������*��������"�#����"#��#����"�"�� �����
��"�"�+��"�+���#"����� ��
Shop Floor Management
3–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� ,�� �� ��"������ ��� � ���#������*�#������" �." "#���+�����#
Processing Options for Manufacturing Work Order (P48013)
Defaults Tab
7��#��������"�����#"���#�����"+��#�����+�� #��� ���+��#����������#�#���������"#��+������������.��*������ "�������*�����
1. Document Type
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#�������"�#����"#�#�����*�������������#�#����"��������+"���������@��0��A�#��#�"���#"+"��#���"�"�������������+�#����������#����#��#����������#�#����#�������#����+�� #��� �����������"#�+���#����� ��#�7����+"��������+���
2. Back Scheduling Unit of Measure
7��#�"�����"�����#"���#�����"+��#�����+�� #���"#��+�������#�����+��.��*����� "���#�����*������7�"#��+�������"��������+"���������@��072A�#��#"���#"+"��#�����"#��+�������#�����"��#����������#����#��#�����"#��+������#�������#�����+�� #��� �����������"#�+���#����� ��#�7����+"��������+���
3. Back Scheduling Queue Hours
7��#�"�����"�����#"���#�����"+��#�����#����#��#�#����#������#�.��*����� ��F���������"��#�����*�������#"����=� "���� �����3
8 ��* �����#���.��*����� ��F������������������#�����+�#����������"#��������
$ �����#���.��*����� ��F������������������#�����+�#�����*�����������
Optional Defaults Tab
7��#��������"�����#"���#�����"+��#�����+�� #��� ���+��#���#������"�"#��.��"��"���#�#�������#�������+�����������+��#�����*��������������#����#����#"����#�����+�� #��� ���+��#���������#��8�"���7�"#�
1. Work Order Type
7��#�"�����"�����#"���#�����"+��#�����+�� #���*�����#�������"�#����"#�#�����*��������*�����#����"��������+"���������@��0�9A�#��#�"���#"+"�#���#�����+���*��������#��#�����*�����#����#�������#�����+�� #��� ����������"#�+���#����� ��#�7����+"��������+���
Entering Work Order Headers
3–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Work Order Priority
7��#�"�����"�����#"���#�����"+��#�����+�� #��"�"#�����"�#����"#��#����*��������*������"�"#��"��������+"���������@��05)A�#��#�"���#"+"��#���"�"#���+�#����������#����#��#�����*������"�"#��#�������#�����+�� #�� �����������"#�+���#����� ��#�7����+"��������+���
3. Beginning Status Code
7��#�"�����"�����#"���#�����"+��#�����+�� #�.��"��"���#�#����������#����*����������������.��"��"���#�#�������"��������+"���������@��0��A#��#�"���#"+"��#���#�#���+�#�����*�����#��������������*�����"����#�����#��#���#�#�������#�������#�����+�� #��� �����������"#�+���#����� ��#�7���+"��������+���
4. Charge to Business Unit
7��#�"�����"�����#"���#�����"+�����#���#����#������#���5�/��#B��.��"��#���8�"���7�"#�2�#��#�. ��@1���&A���#���.����0� ��#����#����*�������#���������#��8�"���7�"#��=� "���� �����3
$ �����#������#�����/��#����.��8 ��* �����#������#���.����0� ��#�
5. Cross Reference Code
7��#�"�����"�����#"���#�����"+��#�����+�� #�����+�������������������+�����������"��������+"���������@4$0��A�#��#���#��"�������#����#���#"����"#����� ������#�+���.� �#��"#������#��#��������#�������#����+�� #��� �����������"#�+���#����� ��#�7����+"��������+���
�����������#������������#�"�"������"#���#��#��" �.���.� �#��+��������*����#"���+�����#����#���� �������#�����"+������ ������#�"#���"+������##�"�����"�����#"���#��)�
Sales Order Processing Tab
7��#��������"�����#"���#�����"+��#�����+�� #��� ���+��#����� ���������������� �����������"���#�#�������+��#�����*����������#���#������� �����
Shop Floor Management
3–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����#�#�������"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#����*��������#��#���#�#�������#�������#�����+�� #��� ����������������� ����������"����� �����������#����+���#����� ��#�7����+"��������+���
1. Held Status Code
7��#�"�����"�����#"���#�����"+������+�� #�#�#�������+������ ����*������#�#�������"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#�����*�������#��#���#�#�������#�������#�����+�� #��� �����������"#�+���#���� ��#�7����+"��������+���
2. Changed Status Code
7��#�"�����"�����#"���#�����"+������+�� #�#�#�������+��������������*������#�#�������"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#����*��������#��#���#�#�������#�������#�����+�� #��� �����������"#�+��#����� ��#�7����+"��������+���
3. Canceled Status Code
7��#�"�����"�����#"���#�����"+������+�� #�#�#�������+��������� �����*������#�#�������"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#����*��������#��#���#�#�������#�������#�����+�� #��� �����������"#�+��#����� ��#�7����+"��������+���
4. Cutoff Status Code
7��#�"�����"�����#"���#�����"+������+�� #�#�#�������+�������� �#�����*����+����"���� ��������#"�"#�������#�.����#������#�#�������"�������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#�����*��������#��#���#�#������#�������#�����+�� #��� �����������"#�+���#����� ��#�7����+"�������+���
Category Codes Tab
7��#��������"�����#"���#�����"+��#�����+�� #���#����������+��#�����*��������#���"#��0.������ �"+"��#"��������
��*�������#����������"��������+"���������@��0�$������� A�#��#�"���#"+"�#�����#�����+��#�����*��������#��#�����#����������#�������#�����+�� #�� �����������"#�+���#����� ��#�7����+"��������+���
-#��0.�������#����������"��������+"���������@ �0��A�#��#�"���#"+"��#��"#��0.������ �"+"��#"�����������#�����*��������������#��#�����#���������#�������#�����+�� #��� �����������"#�+���#����� ��#�7����+"�������+���
Entering Work Order Headers
3–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Category Code 1
7��#�"�����"�����#"���#�����"+��#�����+�� #���#����������+��#�����*�������*�������#����������"��������+"���������@��0�$A�#��#�"���#"+"�#�����#�����+��#�����*��������#��#�����#����������#�������#�����+�� #�� �����������"#�+���#����� ��#�7����+"��������+���
2. Category Code 2
7��#�"�����"�����#"���#�����"+��#�����+�� #���#����������+��#�����*�������*�������#����������"��������+"���������@��0��A�#��#�"���#"+"�#�����#�����+��#�����*��������#��#�����#����������#�������#�����+�� #�� �����������"#�+���#����� ��#�7����+"��������+���
3. Category Code 3
7��#�"�����"�����#"���#�����"+��#�����+�� #���#����������+��#�����*�������*�������#����������"��������+"���������@��0� A�#��#�"���#"+"�#�����#�����+��#�����*��������#��#�����#����������#�������#�����+�� #�� �����������"#�+���#����� ��#�7����+"��������+���
4. Category Code 1 on the work order header
7��#�"�����"�����#"���#�����"+��#�����+�� #�"#��0.�������#����������+�#�����*������������-#��0.�������#����������"��������+"��������@ �0��A�#��#�"���#"+"��#���"#��0.������ �"+"��#"�����������#�����*�������������#��#�����#����������#�������#�����+�� #��� �����������"#�+���#���� ��#�7����+"��������+���
5. Category Code 2 on the work order header
7��#�"�����"�����#"���#�����"+��#�����+�� #�"#��0.�������#����������+�#�����*������������-#��0.�������#����������"��������+"��������@ �0��A�#��#�"���#"+"��#���"#��0.������ �"+"��#"�����������#�����*�������������#��#�����#����������#�������#�����+�� #��� �����������"#�+���#���� ��#�7����+"��������+���
6. Category Code 3 on the work order header
7��#�"�����"�����#"���#�����"+��#�����+�� #�"#��0.�������#����������+�#�����*������������-#��0.�������#����������"��������+"��������@ �0��A�#��#�"���#"+"��#���"#��0.������ �"+"��#"�����������#�����*�������������#��#�����#����������#�������#�����+�� #��� �����������"#�+���#���� ��#�7����+"��������+���
Shop Floor Management
3–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Validating Tab
7��#��������"�����#"���#�����"+�����#���#����#������ �� �#��#�����# "#�������#"���"�#��#"���"+�F���#"#"�����������������������#���#���� "��#�#�����#� "#�#�<#����"�#�#���"#��0.����������
1. Quantities
7��#�"�����"�����#"���#�����"+�����#���#����#�����#���#"�� ���� �� �#��#�����#� "#�������#"���"�#��#"���"+�������������#���F���#"#"����#�����*������=� "���� �����3
$ �����#������ �� �#��#���"�+���#"���8 ��* �����#���������#���� �� �#��#���"�+���#"���
2. Item/Branch Plant Validation
7��#�"�����"�����#"���#�����"+�����#���#����#����� "��#������<"#"��-#��08�����������������������������#������*������=� "���� �����3
8 ��* �����#���������#��� "��#������<"#"���-#��08����������������������������#������*�����
$ �����#����� "��#������<"#"���-#��08����������������������������#������*�����
Hold Codes Tab
7��#��������"�����#"���#�����"+��#���� �#���� ���������������������� �������#����#������"+�#�����*�����F���#"#������#���������
?� �������"��������+"���������@4�0?�A�#��#�"���#"+"�����#���#�����*����"�.�"����� �����#��#����� �������#�������#�����+�� #��� �����������"#�+��#����� ��#�7����+"��������+���
1. Sales Order
7��#�"�����"�����#"���#�����"+��#�����+�� #�� ������#������?� �������"�������+"���������@4�0?�A�#��#�"���#"+"�����#���#���� ������"�.�"����� ����#��#����� �������#�������#�����+�� #��� �����������"#�+���#����� ��#�7���+"��������+���
2. Purchase Order
7��#�"�����"�����#"���#�����"+��#�����+�� #������������#������?� ������"��������+"���������@4�0?�A�#��#�"���#"+"�����#���#��������������".�"����� �����#��#����� �������#�������#�����+�� #��� �����������"#�+���#���� ��#�7����+"��������+���
Entering Work Order Headers
3–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Display Options Tab
7��#��������"�����#"���#�����"+�����#���#����#����"� ���#���8" ��+2�#�"� ����������)��#"��������+"� ��"+�������*����������#�����+��#�"����*��������*������������+��#�"�����*�����"+�2�"�#����� ���"��#��." ��+���#�"� �#����������#"���#����+"� ��
1. Bill of Material Field
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���8" ��+2�#�"� ������+"� �����#�����*�������#�" �+����=� "���� �����3
$ �����#����"� ���#���8" ��+�2�#�"� ������+"� ��8 ��* �����#���������#��"� ���#���8" ��+�2�#�"� ������+"� ��
2. Routing Type Field
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���)��#"�������+"� �����#�����*�������#�" �+����=� "���� �����3
$ �����#����"� ���#���)��#"��������+"� ��8 ��* �����#���������#��"� ���#���)��#"��������+"� ��
Versions Tab
7��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"��������#��#�#����#������"��#�����*��������#"�������3
� 8" �(��" �." "#�
� ������*�������#�
� ("�����"� �B��.�
� )��#"��
� 5�#�:"#
� 2�#�"� �-��
=�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������
-+����� �����#����+"� ��. ��*��#����#������#���Q������$���"����+�#���������
Shop Floor Management
3–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Bill Availability (P30205)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���8" �(��" �." "#��������@5 ���6A�+���#�����*��"#�2���+��#�"�����*�����+�����#�����*�������#�" �+����-+����� ����#�"�����"�����#"���. ��*��#����#������#���Q������$���"����+�#���8" (��" �." "#��������
=�"������#� �����#���8" �(��" �." "#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
2. ECO Work Order Entry (P48020)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���������*�������#��������@54����A�+���#����*��"#��2���+��#�"�����*�����+�����#�����*�������#�" �+����-+���� �����#�"�����"�����#"���. ��*��#����#������#���Q������$���"����+#���������*�������#��������
=�"������#� �����#���������*�������#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
3. Assign Serial Numbers (P3105)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���("�����"� �B��.��������@5 $�6A�+���#����*��"#��2���+��#�"�����*�����+�����#�����*�������#�" �+����-+���� �����#�"�����"�����#"���. ��*��#����#������#���Q������$���"����+#���("�����"� �B��.��������
=�"������#� �����#���("�����"� �B��.���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�����"+"����"���#����#����������
4. Routings (P3112)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���)��#"���������@5 $$�A�+���#�����*��"#�2���+��#�"�����*�����+�����#�����*�������#�" �+����-+����� ����#�"�����"�����#"���. ��*��#����#������#���Q������$���"����+�#��)��#"���������
=�"������#� �����#���)��#"����������"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�����"+"����"���#�����#����������
Entering Work Order Headers
3–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5. Parts List (P3111)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���5�#�:"#�������@5 $$$A�+���#�����*��"#�2���+��#�"�����*�����+�����#�����*�������#�" �+����-+����� ����#�"�����"�����#"���. ��*��#����#������#���Q������$���"����+�#���5�#:"#�������
=�"������#� �����#���5�#�:"#��������"� ���"�+���#"��������+��������"��#������#�����"+��#�������"�����#"���#�����"+"����"���#�����#���������
6. Material Issues (31113)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������#�*��������<"#�#��#�����*�����-����#���-���@5 $$$ A�+���#�����*��"#�2���+��#�"�����*�����+����-+����� �����#�"�����"�����#"���. ��*��#���#������#���Q������$���"����+�#�����*�����-����#���-���������
Processing Manufacturing Tab
7��#�"�����"�����#"���#�����"+�����#���#����#�����#���#"�� �����#���;�����#�����.�;�����#�
1. Co-Products and By-Products
7��#�"�����"�����#"���#�����"+�����#���#����#�����#���#"�� �����"������##�������;�����#�����.�;�����#�+���#���8" ��+�2�#�"� ��=� "���� ����3
$ �����#������"�������##�������;�����#�����.�;�����#�+���#���8" �+�2�#�"� �
8 ��* �����#���������#�����������##������;�����#�����.�;�����#�+��#���8" ��+�2�#�"� �
Interoperability Tab
7��#�"�����"�����#"���#�����"+��#���#����#"���#����#��#�#����#�����+���<��#�����"���
1. Transaction Type
7��#�"�����"�����#"���#�����"+��#���#����#"���#����#��#�#����#�����+���<��#�����"���������#"���#����"��������+"���������@��0��A�#��#"���#"+"��#���#�����+�#����#"���+��#�����*��������#��#���#����#"���#����#������#�����+�� #��� �����������"#�+���#����� ��#�7����+"��������+����-+���� �����#�"�+"� ��. ��*��#����#���������#�����<��#�����"���
Shop Floor Management
3–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–37OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Entering Rate Schedules
)���#"#"�������+��#�"���"���"�����+��"#���#��#������������"�������#"�����������������"��#��������#"��� "����(��#������� ��"����F��#�#������ �#����"����F���#"#���+����"#�����������"����+�#"�����������"+"�������#"��� "����
)�#������� �����"#��+��������������#� "#��������#"���"�#��#"���������#������ �����������"+"��#���F���#"#���+�#���"#����F��#����#����F�"�����#������#��������#"��� "����������#� "#�������#"���"�#��#"������"+��#�����#�����#"���������������F�"���#������ �#��#����#��
7��#�����*��"#��)�#�������� ��������#���������#������� ������������������#���#����#�����"+"��#���+� ��"��3
� :"������"�#�#���:"��0-#���)� �#"���"��2�#�
� ��#�����"�#�#��������"�#������+ ����� ����
� �++��#"�����#����������"�#�#�����+"������"��
���"������� ��#������"#�������+��#�����������#"��� "���+������#��������"+#������ �������"++���#� "����������#"�������"++���#������+�#�����*��9������"+��#�����"+#����� "������#�������+ ����� �����
9�������"���#"+�����#��"<��"+#�+��#��������#"��� "����"���2���+��#�"�����#��#��9�������#����"���#"+��� ��"+#�+��#��������#"��� "���.����*����#��"+���������(+#�������#����#����"+#�����#���+� ��"�������+ ����� �����#������ �������#"��������"�� �3
� :"��������� "�����*.����
� ��F����"�����*.����
8�+���������#�����#��������������#����� �#"���"��.�#������� "���������"#���������������#���-#��0:"���)� �#"���"��������@5 $�% A�
Before You Begin
� ��#����#�������"�����#"���#����#���#"�� ���##����#�����#� "#������#"���"�#��#"��������������#�����#������� ��
Shop Floor Management
3–38 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������� ������
1���#���)�#��8���������� "��������@> $$6A����������#�0�������)�#������� ��
$� �����*��"#��)�#�������� ������� �#��#���+� ��"���+"� �3
� 8����05 ��#
� -#���B��.�
� �++��#"���1�����#�
� ������#�
�� � "�*�(���
� ���)�#�������� ��)��""����� "�*�#���)�#�������� ��#�.��������� �#��#��+� ��"���+"� �3
� E���#"#�������
� :"��0��
4� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� 5
� �
� )�#���#�#�
� ��#�����$
� ��#������
Entering Rate Schedules
3–39OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��#�����
� 8" �����
� )��#"�������
� 1��H������
������"���������������#�#���5��������"�����#"����#����#�����������#����#������� ��#���##����#�����#� "#�������#"���"�#��#"����#���#"�� ���������<"#�#��������##����#�����#� "#�������#"��"�#��#"���.���.�"##"�����.�#�������������#��##����#�����#� "#������#"���"�#��#"�������"������ ��%�����������,�����+������+�����"�+���#"���
%���� @A���������
:"��0�� (����.��#��#���+"����������#"��� "������� ����#�" ��
��*����#������#"�������.����+"����"�"���#��� "����
�� �
E���#"#������� ����F���#"#���+���"#��++��#���.��#�"�#����#"���
� (������+"���������@��0�?A�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����D���#�������������������#��#����"+#���
#������ ����D���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #��� ���
&���*� �� � � ������� ��������������� ��������������
�����"+#�+����"���#����#��"��"�"�� ������� ���
5 (������#��#���#��"���#���+�F�������+�#�������� ��
=� "���������3
$ 2��#� �
� ���* �
��" �
4 5����"+#�@+��+�#�����A
)�#���#�#� (������+"���������@��0��A�#��#����".��#���#�#���+��
��*�������#������� ��������"���"��������������
(���#�#���������+���%��#������%%�#"����#����#��
#����#���#"�� ������#��#�����#������ �#���
Shop Floor Management
3–40 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
1��H������ (������#��#�"��"��#��"+�#�������"�+�H����25�02)5����
��#�� ���+��+�H�������
=� "���������3
9 9���+��H��#�������
B B��������#�+��H��#�������@��+�� #A�
��#�����$ (������+"���������@��0�$A�#��#�"��"��#��#�������#
#������������+����� �����#�+������*������9������
�"�������*�����#���� �����������������#���#"���
B�#�3���#�"��+������#�"��������"�����#"���#��#
� �������#����#������+�� #��� ���+��#�"�+"� ���-+����
��#������+�� #��� ��������+���+����"�������������#
#�"�����"�����#"����#����#����"� ���#����� ���"��#��
�����"�#��+"� �����������*�����#��#��������#������
�#���� ���"� ���#����� ������#���5�/��#���#���+���
9��������"#��������#������"���#�����+�� #��� ���
B�#�3�(�����"�����#"���+��#����()���#�� �#�������#�
����+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#�����#��������+"� �����#����()���#�
+�����������������������()��9��������"#��������#��
���"���#�����+�� #��� ���
��#������ (������+"���������@��0��A�#��#�"��"��#��#���#�����
��#������+�����*�����
B�#�3�(�����"�����#"���+������+��� �#�������#���
��+�� #��� ���+��#�"�+"� ��������#�����#��#�����+�� #
�� �����#���#"�� ��"��#��������"�#��+"� �����������*
����#��#��������#�����#����+����������#���5�/��#
��#���+����9��������"#��������#������"���#�����+�� #
�� ���
B�#�3�(�����"�����#"���+��#����()���#�� �#�������#�
����+�� #��� ���+��#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#��������#��+"� �����#����()���#��+��
��������������������()��9��������"#��������#��
���"���#�����+�� #��� ���
��#����� (������+"���������@��0� A�#��#�"��"��#��#���#�����
��#������+�#�����*�����
B�#�3�(�����"�����#"���+������+���� �������#�
��#������+�� #��� ���+��#�"�+"� ��������#�����#��#��
��+�� #��� �����#���#"�� ��"��#��������"�#��+"� ����
������*�����#��#��������#�����#����+���������
#���5�/��#���#���+����9��������"#��������#������"��
#�����+�� #��� ���
B�#�3�(�����"�����#"���+��#����()���#�� �#�������#�
����+�� #��� �����#�"�+"� ��������� ���#�����"� ��
��#���#"�� ��"��#���)� �������1"<�+"� �����#����()���#�
+�����������������������()��9��������"#��������#��
���"���#�����+�� #��� ���
Entering Rate Schedules
3–41OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
)��#"������� (������+"���������@4�0�)A�#��#�"��"��#��#���#�����+
��#"����9���������+"����"++���#�#�����+���#"��
"�#��#"���+���"++���#����
1���<��� �3
2 �#������2���+��#�"���)��#"��
)�G )���*�)��#"��
)�? )���)��#"��
9�����+"���#�����#"���#�������#�����*�����������
�����#���#�������#������"+"��#�����+���#"���#��#����
��+"���"��#�����*�������#"���
5����#���#"������������"#��5 ���"����#�������� �
2�#������#"���
See Also
� �����+ ���� ����������������� ���+��"�+���#"����.��#�"�#���#"�� ��##���"���#�����#� "#�������#"���"�#��#"��
� ���� ��� �+��+� &����#��������+��"�+���#"����.��#��##"����������#"��� "��������"+#
� ���� ��� ������! ��,���� ���+ ��+��"�+���#"����.��#����#"��� �#"���"��.�#����� "�������"#��
Processing Options for Enter/Change Rate Schedule
Defaults
1. Enter the Rate Type. (Default ____________ is ’SC’) 2. Enter the Unit of Measure to ____________ use for Scheduling. 3. Enter the Number of days to add ____________ to today’s date for the Thru Date. (Optional)
Opt Defaults
1. Enter the From Status. ____________ 2. Enter the Thru Status. ____________ 3. Enter the Beginning Status to ____________ use when creating a new rate. (NOTE: This status will not be used if parts list and routing are created in batch. In this case, the status in R31410 will be used) 4. Enter the status code beyond ____________ which the rate is considered closed. (Default is ’99’)
Shop Floor Management
3–42 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5. Enter a ’1’ to default the ____________ Charge to Business Unit from the job number in the Business Unit Master file (F0006). If left blank, the Branch/Plant will be used.
Display
1. Enter a ’1’ to only display ____________ open schedules.
Categories
Enter the Default for the following:
1. Category Code 1 (optional) ____________ 2. Category Code 2 (optional) ____________ 3. Category Code 3 (optional) ____________
Or, enter the Item Branch Class Code fields from which to retrieve values:
4. Category Code 1 (optional) ____________ 5. Category Code 2 (optional) ____________ 6. Category Code 3 (optional) ____________
Process
1. Enter a ’1’ to attach a Parts ____________ List and Routing interactively; Enter a ’2’ to submit to batch. If left blank, Parts List and Routing will not be attached.
Edits
1. Enter a ’1’ if this program ____________ should update the Parts List and Routing when the Rate quantities or dates are changed. If left blank, no recalculation will be performed. 2. Enter a ’1’ to validate for ____________ existing Branch/Item records.
Versions
Enter the version to be used for each program. If left blank, ZJDE0001 will be used.
1. Completions Workbench (P3119). ____________ 2. MPS/MRP/DRP Time Series ____________ (P3413). 3. Bill Availability (P30200). ____________ 4. Assign Serial Numbers (P3105). ____________ 5. Lot Master Revisions (P4108). ____________ 6. Bill of Materials Revisions ____________ (P3002). 7. Bill of Materials Inquiry ____________ (P30200). 8. Line Scheduling Workbench ____________ (P3153).
Entering Rate Schedules
3–43OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9. Supply/Demand Inquiry (P4021). ____________ 10. Order Processing (R31410). If ____________ left blank, XJDE0008 will be used. 11. Parts List (P3111). ____________ 12. Routing (P3112). ____________
Hold Codes
1. Enter the Hold Code to be ____________ updated to the related purchase order if the rate quantity or date changes. If left blank, the purchase order will not be updated. (NOTE: The purchase order will be updated only if the rate routings are to be recalculated)
Interop
1. Enter the Transaction Type for ____________ the export transaction. If left blank, export processing will not be performed. 2. Enter a ’1’ to write the before ____________ image for a change transaction. If left blank, the before image will not be written.
Shop Floor Management
3–44 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3–45OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Work Orders and Rate Schedules
(+#��������#������*�����������������������#�������5���"���.�#��������#���##����#�����#� "#�������#"���"�#��#"���+���������*�������#������� ���������-+������##����#�����#� "#�������#"���"�#��#"������� ����������#�������5���"���.�#���������#�������#�������"�#�#������������*�
��������5���"��������D�����"�����#"���� �������#����+������"��������+��#���+���#"����9����������#���+� ��"��3�
� >����#������#� "#����#"���"�#��#"��������;�����#�����.�;�����# "#�@"+���� "��. �A����� �#���
� -��"��#��#�����#��#�����+���++��#"�"#������*"��
� �������#���#�#��������+�#�����*��������#������� ��#��#����.�"��������
� 5"�#���"���"�+���#"����.��#�#�����*��������#������� ��������#�����#"������#� "#��� ������#�<#��������+�#�
� 5"�#����������*�#�������#��#� "#����������*����������#������ �
� ��#��#�����"#��+�������+��.��*����� "��
� -���"����#�����#���#"�� �
� >����#������#�������#�+��#�����*����������#������� �
� -��"��#����"�����"����+����"�#���������#��#��������#�#������
� ��#��� ������"�+���#"���+��*"#�����"��������"�#�#���#�<#� "����+� �����
� ���#����*��������"�#��"����""��� ���
� )�������#"�"#"��#��#����.�����������." "#"��������"�#"���#����"�*� "#��#����<���#"������#
9�����������"H����������#��#����+���#"���#�������� "���"++���#�#�*�.��##"���������� ����#"�����"����������"#���"++���#���#��� ��#"����������"�����#"����� ����1���<��� ���������� ���#����������"���#�������#�#�����#� "#�������#"���+����*���������#�����"���#���"�#����������*���������#�����"���#����+���.�#���"����#���"���
Shop Floor Management
3–46 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���� �#��#���+� ��"���#�*3
� )�����������"��
� 5"�#���������@��#"��� A
-+���������#���������������#����#���+� ��"���"�#���#"���+��#������ �3
/�������������
�����������
7������5���"���#����������. ��"�� �"���� �
���������#������#� "#�������#"���"�#��#"����"+�#��
��#� "#�������#"���"�#��#"��������#�� ������<"#��7�
� ��#����E�+����������#�#��#�#����#����" ��"#���� �
#��#�����*�����5�#�:"#�#�. ��@1 $$$A�������#��
���#���-���������������������#"�����F������+"� �
+���#���(��. ��-�� �"���)� ��#�. ��@1 �% A�"��#�"
����"����7��� ��#����5�#�����#���+� ��"��3�
� 5"�#���������#�������#�� "���"#������#���� ����
� �"� ����"++���#� ��� �+�����+"�������������#��"����� ��������#�
�����#��������#������#� "#���+� ��3
� 7"�����#��+���#����� ��������#�" �#�. ��@14�$$A�����#���+���#�����#� "#�� ����"����� �������#��#�����#�������"��#�����*�����5�#�:"##�. ��@1 $$$A
� 5���"���� ��#����E�+����������#�#���"#����"#"��� ���������#�#��#�����#� "#
�����#��������#������#"���.������"���#���� �#��
��#"���� ��
=����������������
�����������
����������������*���������������������"��
��#"���#���#��� ���+��#���#�#���+�#�����*��������
����#"��� �#�"+�#�����������#�+�" �#�#�
Processing Work Orders and Rate Schedules
3–47OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5��� �2����
���������������������
-+��������#������*�����+����*"#���"���� �����
��#���#�������#�"#�������.��.�" #�����#��*���"�
"����#����+#������������������� �#��#�����*�����
�����#����.#��#�#�����������#�+���#�����;����
F���#"#��"��"����#���������������#��#�����*�����
�����#���#��������#�������#�"#���"�#����;����
F���#"#��"��"����#����+#���������� �#��#�����*�����
9�����#����"+������ "���#����+��� �����"�����#"��
"��#�������5���"������������"� "���#������#�.�
�#������#�<#�#�����"���"#"���/���� ���#"��+����#��+
������ ������"����#���+��#�����������#���������
����#��#���� ���������"� "���#����� �������#��#�#��
�#���������#��.#��#���������#�+�����;����
F���#"#��"��"����#������"����"����"����#����+"��#"��
��� ������#��
������� �����������
�����������
-+����������������2��������#�����������������
��*������#����#���������#������+��"����#���
-�#�����#����#��������#�����"�*��F��#�������"�*
�F��#���#"+"�������+�#��������+����#�"� �+���#��
��������
(+#��#����#������#��#����"�*��F��#��#����������
2��������#��#���������"�#��#"����������#�
����#"���+������#�����+"��������#����#�������#�
#�����#� "#�����"������#�����;�����F���#"#��+��#�����
���#"��������������#���F���#"#����������+��#���1��
���#"���
9����������"+��"��#�������"�����#"���"+��������#�#�
�"�#������� "��#����"�*� "#�+���� #"� ����*�������
�� ���"��"�"��� ��"�*� "#�+���������*�����
Before You Begin
� ��#��"�����"�������"�����#"���#�����.�+������"���#�"�������
� ��#������ "����*����#�� ���#"������������ ��� %���#�������
� 7��#�������"�����#"���#��"�"#"�#����������2��������#��#��"�#���#"�������������%���+�������� �"��#�����������%���+���������������� ���+��"�+���#"����.��#��##"�������������2��������#�
See Also
� � ��� -�.!���� ����+������<� ���#"����+�����#����#����� �� �#�+"<���������"�. �� ���#"��
Shop Floor Management
3–48 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� %��� ��� �+) �����#��� �����������"��#������������������������ ���+������"�+���#"����.��#��#���"�#���#"��
� ������+�"����! �����,��� ���"��#������������ ��������� ���� ��+������"�+���#"����.��#���*�������#
Running Order Processing
1���#�����" ������5����#"���'��"��#�������@> $$$A�����������5���"���
����������������5���"����#����#������#��#���� ��������"�����"��#����*�����=�"�����#�. ��@1 $��A��������"���������#����"++������"����#+��������#���#�����������#��#�#���.��"��"����+�#���������#"�����"���
����������������5���"����#����#����� �#���������"�� �������#��������� ����#������#� "#�#��#�"��##������#��#�����*��������#������� ��9������������ ����"��#����#��;�����#�����#� "#��-+�����������#�#��#�� "#��#����#�������"#�#����+���#����"���� ���#"���"��#���-#���:���#"��������
9������ ����#�������#��#�����#� "#�"+�������#����#��� "#����.����"����#�#�����*��������#������� ���-+�����������#��#�����#� "#��+#����#�����.����"�����������#������ ����/�#�#��� "#�#�������#���� "��#"����+��������#�F���#"#"��
����������������5���"����#����#����� �#���������"�� �������#��������� ����#������#"���"�#��#"����9������ ����#�������#��#�����#"��"�#��#"���+��#�����*��������#������� ��"+���������F���#"#"��������������"�#������+�"#�����#"���
7��������"�����#"���#������#��#�����#"���"�#��#"���"+������������#����*��������#������� ��������#������ �� �#��#������ �.������������"�������.�������#���F���#"#�����������#�����*��������#������ ��
-+�#����#���+"���������"���� �� �#"���#�����#��+���������#"����F�������"#��#��#�����*��������#������� ��#�#������F��#�����#��+��#��#����#"���
�����#���#"�� ��"�����#�"� �#������*���������������������5���"����#�#�������"�����#"���+��8�#���-����#���-���#���� �����"����+�#��(�#���#"����*�����-����#���-���������) $4����9��������#�#�"������#���"#���"����� ��"#���"���#"+"�������+ �������+ ���� �"#���9��������#������#�"�������@) $4��A�+����������
7��������"�����#"���#���"�#������� "��#�����#� "#�#��#����"��������"#��������#���"�*�"����#����������+��#�������+��#�"���������9������������������*��������#������� ��"����"�� ����������"#�����
Processing Work Orders and Rate Schedules
3–49OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���� "��#���.�������"#��������� ���#"���� �#����"#��+�����������.����0� ��#�������#����"�#�"�+���#"���+�������.����0� ��#����������#�����������"�#����������������+����"#���#��#�"�"�����"++���#� ���#"���� �#�����"#��+����������������#�� "����
����������������5���"���#����#��������#������<���#"������#�+�#���+� ��"�������"#"��3
� �����#������"�� �����#����"�*��F��#�.�#��"����#�������#������# "#�
� �����#����"����#����#�����"�*��F��#�.������J�����������#� K�����#��#�#��9�
Processing Options for Work Order Generation (R31410)
Process Tab
7��#��������"�����#"���#�����"+�����#���#����#�������#���+� ��"��3
� >����#������#� "#�������#"���"�#��#"��
� 7���#��#�����#� "#�������#"���"�#��#"���"+�F���#"#"������#�������������
B�#��#���+� ��"���"�+���#"�������"���#��������#"����+�#�����#� "#������#"���"�#��#"��3
� �������������������#"����#����#����� �#���������"�� �������#��������� ����#������#� "#�����#"���#��#�"��##������#��#�����*�����
� 9������������ ����#���������#��#����#��;�����#�����#� "#��-+����������#�#��#��� "#��#����#�������"#�#����+���#����"���� ���#"���"�#���-#���:���#"����������9������ ����#�������#��#�����#� "#�"+������#����#��� "#����.����"����#��#�����*������-+�����������#��#����#� "#��+#����#�"� ����.����"�����������#������ ����/�#�#�����# "#�#�������#���� "��#"����+���������#�F���#"#"���?�������"+�F���#"#"�����#��������������������������#�#�"�������#������#��#�����#� "#����#���7���#��5�#�:"#�����)��#"���-�#��#"�������"�����#"���
� 9������ ����#�������#��#�����#"���"�#��#"���+��#�����*�����"+��������F���#"#"���������������"�#������+�"#�����#"���������������#�"������#"����#����#������ �� �#��#������ �.�������������"������.�������#���F���#"#�����������#�����*������-+�#����#��+"���������"���� �� �#"���#�����#��+���������#"����F�������"#���#�#�����*�����#�#������F��#�����#��+��#��#�����#"����?�������"+F���#"#"������#��������������������������#�#�"�������#������#��#����#"���"�#��#"�������#���7���#��5�#�:"#�����)��#"���-�#��#"������"�����#"���
Shop Floor Management
3–50 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Generate Parts List and Routing Instructions
7��#�"�����"�����#"���#�����"+�����#���#����#��������#������#� "#���#"���"�#��#"������.�#��������������������*������=� "���� �����3
$ �����#��������#������#� "#��� ��� �����#��������#����#"���"�#��#"����� �� �����#��������#��.�#������#� "#�������#"���"�#��#"���8 ��* �����#���������#������#������#� "#�����#"���"�#��#"���
5 �����+��#��#�����*�����#�.��� ��+����#�" ���"�+���#"����.��#�#�����# "#�������#"���"�#��#"��������#"���
2. Update Parts List and Routing Instructions
7��#�"�����"�����#"���#�����"+�����#���#����#�������#������<"#"����#� "#�������#"���"�#��#"���"+�#�����*�����F���#"#������#���������������=� "���� �����3
$ �����#�������#��#����<"#"�����#� "#�������#"���"�#��#"���8 ��* �����#���������#�����#��#����<"#"�����#� "#�����#"���
Defaults Tab
7��#�"�����"�����#"���#�����"+�����#���#����#�����������"+"�����#���#�����*�����#�#���#��+���++��#"�"#������*"�������#�����"+��#�����+�� #������#�#�������#�����
1. Work Order Date
7��#�"�����"�����#"���#�����"+��#�����+�� #���*�������#��+���++��#"�"#�����*"����-+����� �����#�"�+"� ��. ��*��#����#������#�����*�����#�#���#��
2. Header Status Code
7��#�"�����"�����#"���#�����"+��#�����+�� #�#�#�������+��#�����*������������������#�#����"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+#�����*��������#��#����������#�#����#�������#�����+�� #��� �����������"#+���#����� ��#�7����+"��������+����-+����� �����#�"�+"� ��. ��*��#����#��������#��������#���#�#�����#�����*�����������
Parts List Tab
7��#��������"�����#"���#�����"+�����#���#����#�������#���+� ��"��3
� 7���.#"#�#��"#��������#����"�����#���
� 7���"����""��� ��� �#��.�" ��#�����#� "#����"�#
Processing Work Orders and Rate Schedules
3–51OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 5�+ ����"����� ����"���� �"#��
� 7������"#���#�����"��������"+"������#���2���+��#�"������#��#+��
1. Substitutions
7��#�"�����"�����#"���#�����"+�����#���#����#������." ��+���#�"� �.#"#�#�������#����"�����#�����=� "���� �����3
$ �����#�������.#"#�#"���8 ��* �����#���������#�����.#"#�#"���
2. Prior Revision Level
7��#�"�����"�����#"���#�����"+�����#���#����#���.�" ��#�����#� "#���"�#����"����""��� ��� ��=� "���� �����3
$ �����#�������"����""��� ��� �8 ��* �����#���������#�����"����""��� ��� �
3. Preflush Items
7��#�"�����"�����#"���#�����"+�����#���#����#���"���� �"#������#����*������=� "���� �����3
$ �����#���"���� �"#���8 ��* �����#���������#�"�����+ �����"#���
-+�����������#��"���� �"#����#����#����� ��"�����#�"� �"+��������"+��#����"����+�#���-����#���-���������@5 $$$ A�"��#���-����#���-������"�����#"��������#���=�"���#�.�
4. Commitment Processing
7��#�"�����"�����#"���#�����"+�����#���#����#���.���������"#���#����"��������"#����#��#�����#� "#��=� "���� �����3
$ �����#���������#��������"#���#�����"���8 ��* �����#����������"#���#����#� �
9������"+������"#���#�����"���"��#�������"#���#����#� �+"� ��"��#��2���+��#�"������#��#�������@5 ��%A�
Routing Tab
7��#��������"�����#"���#�����"+��#�����+�� #��� ���#��#�#����#�����+��#�����"#��+���������������#�#����� "���#���������.��"��"���#�#������
Shop Floor Management
3–52 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���#���#����#��#�����*��������.��"�#��#��������"���/���� ���#"���"+��� "��. ��
1. Unit of Measure
7��#�"�����"�����#"���#�����"+��#�����+�� #���"#��+�������#�����+��.��*����� "������#�����#"���"�#��#"����7�"#��+�������"��������+"��������@��072A�#��#�"���#"+"��#�����"#��+�������#�����"��#����������#����#��#����"#��+�������#�������#�����+�� #��� �����������"#�+���#����� ��#�7���+"��������+���
2. Document Type
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#�������"�#����"#�#��������������+�����.���#��#���#"�����������#�#����"��������+"��������@��0��A�#��#�"���#"+"��#����"�"�������������+�#����������#����#��#���������#�#����#�������#�����+�� #��� �����������"#�+���#����� ��#�7���+"��������+���
3. Line Type
7��#�"�����"�����#"���#�����"+��#�����+�� #� "���#�������"�#����"#��#�������������+�����.���#��#���#"������#��#��� "���#����#�������#�����+�� #�� �����������"#�+���#���:"��������������+���
4. Beginning Status
7��#�"�����"�����#"���#�����"+��#�����+�� #�.��"��"���#�#�����"�#����"#�#��������������+�����.���#��#���#"����8��"��"���#�#��"��������+"��������@4�0(�A�#��#�"���#"+"��#���.��"��"���#�#���+�#����������#����#��#��.��"��"���#�#��#�������#�����+�� #��� �����������"#�+���#����� ��#�7���+"��������+���
5. Subledger Field
7��#�"�����"�����#"���#�����"+�����#���#����#�����#��#�����*�������.��"�#��#�����. �����+"� ���+�#���������������=� "���� �����3
$ �����#�����#��#�����*��������.��8 ��* �����#���������#���#��#�����*��������.��
Sales/Configurator Tab
7��#��������"�����#"���#�����"+��#�����+�� #��� ���#��#�#����#�����+��#��� "���#����������<#�#�#��+��*"#���������#����� ��������������#��#���� �� �#��#�����#�"��#�����"�����#�. ���+�#���� ������
Processing Work Orders and Rate Schedules
3–53OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Line Type
7��#�"�����"�����#"���#�����"+��#�����+�� #� "���#�������"�#����"#��#��� ������+��*"#���������#����#��#��� "���#����#�������#�����+�� #��� ����������"#�+���#���:"��������������+���
2. Next Status
7��#�"�����"�����#"���#�����"+��#�����+�� #���<#�#�#�����"�#����"#��#��� �������B�<#�#�#��"��������+"���������@4�0(�A�#��#�"���#"+"��#�����<##�#��+��#���*"#���������#� "������#���� ���������#��#�����<#�#�#��#������#�����+�� #��� �����������"#�+���#����� ��#�7����+"��������+���
3. Standard Cost Calculation
7��#�"�����"�����#"���#�����"+������#����#����� �� �#��#�����#�+���#�����+"�������#"���"��#�����"�����#�. ���=� "���� �����3
$ �����#����� �� �#��#���#��������#�� �����#����� �� �#��#���#��������#�"+�"#������#�� �����.���
�� �� �#���8 ��* �����#���������#��� �� �#��#�����#�
Printing 1 Tab
7��#��������"�����#"���#�����"+�����#���#����#����"�#�#�����*���������"+�������#����"�#���"�+���#"���"�� ���"�#���
-+�����#������#�����������2��������#��"�*"���"�#�+�����#�����*����5"�#�5�#�:"#��������"�#�J-���������K�"��#��� ���#"���+"� ��+��� ���#�"#��#����������#�"� �#�#�������
1. Work Orders
7��#�"�����"�����#"���#�����"+�����#���#����#����"�#�#�����*�����9��������#��"�#����"�#���"�+���#"������".���"��#������"�"�������"����#"������#���5"�#"���#�.�"+����������#�������#���"�#�#�����*������"��#�"�����"�����#"����=� "���� �����3
$ �����#����"�#�#�����*�����8 ��* �����#���������#��"�#�#�����*��������������"�#���"�+���#"���
9�����#�������#���"�#���*�����"+��������#�#���"�#�"�+���#"��������# "#�������#"���"�#��#"����#����������*�#����������� ������#�<#� "���
Shop Floor Management
3–54 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Parts List
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#�"�����"�����#"���#�����"+�����#���#����#����"�#�#������"�#����#� "#��=� "���� �����3
$ �����#����"�#�#�����#� "#�8 ��* �����#���������#��"�#�#�����#� "#�
3. Parts List Detail
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#���5�#�:"#�����"�����#"���#���"�#�#�����#� "#�@�.���A�����#�"����"�����#"���#�����"+�����#���#����#����"�#�#��������� "����+"�+���#"������#�����#� "#��=� "���� �����3
$ �����#����"�#�#�����#� "#���#�" �8 ��* �����#���������#��"�#�#�����#� "#���#�" �
4. Parts List on Separate Pages
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#���5�#�:"#�����"�����#"���#���"�#�#�����#� "#�@�.���A�����#�"����"�����#"���#�����"+�����#���#����#����"�#��������#� "#���������������=� "���� �����3
$ �����#����"�#��������#� "#���������������8 ��* �����#���������#��"�#��������#� "#���������������
5. Consolidated Parts List (FUTURE)
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#���5�#�:"#�����"�����#"���#���"�#�#�����#� "#�@�.���A�����#�"����"�����#"���#�����"+�����#���#����#����"�#������� "��#�����#� "#�����"#���������� "��#���.�������"#��������� ���#"���� �#����"#��+�����������.����0� ��#�������#����"�#������.����0� ��#�������#������������#������������"�#����������������+����"#���#��#�"�"�����"++���# ���#"���� �#������"#��+����������������#�� "����=� "���� �����3
$ �����#������� "��#��#�����#� "#�8 ��* �����#���������#����� "��#��#�����#� "#�
6. Parts List Component Text
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#���5�#�:"#�����"�����#"���#���"�#�#�����#� "#�@�.���A�����#�"����"�����#"���#�����"+�����#���#����#����"�#�#�����������#�#�<#���#�����#� "#��=� "���� �����3
Processing Work Orders and Rate Schedules
3–55OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$ �����#����"�#���������#�#�<#�8 ��* �����#���������#��"�#���������#�#�<#�
Printing 2 Tab
7��#��������"�����#"���#�����"+�����#���#����#����"�#�#�����*���������"+�������#����"�#���"�+���#"���"�� ���"�#���
-+�����#������#�����������2��������#��"�*"���"�#�+�����#�����*����5"�#�5�#�:"#��������"�#�J-���������K�"��#��� ���#"���+"� ��+��� ���#�"#��#����������#�"� �#�#�������
1. Routing Instructions
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#�"�����"�����#"���#�����"+�����#���#����#����"�#�#������"�#����#"���"�#��#"����=� "���� �����3
$ �����#����"�#�#�����#"���"�#��#"���8 ��* �����#���������#��"�#�#�����#"���"�#��#"���
2. Routing Instructions on Separate Pages
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#���)��#"���-�#��#"�������"�����#"���#���"�#���#"���"�#��#"��@�.���A�����#�"�����"�����#"���#�����"+�����#���#����#����"�#�������#"���"�#��#"������������������=� "���� �����3
$ �����#����"�#��������#"���"�#��#"�����������������8 ��* �����#���������#��"�#��������#"���"�#��#"�����������������
3. Routing Instructions Text
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#���)��#"���-�#��#"�������"�����#"���#���"�#���#"���"�#��#"��@�.���A�����#�"�����"�����#"���#�����"+�����#���#����#����"�#�#���#�<#���#�����#"���"�#��#"����=� "���� �����3
$ �����#����"�#�#���#�<#�8 ��* �����#���������#��"�#�#���#�<#�
Shop Floor Management
3–56 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4. Shop Packet Summary
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#�"�����"�����#"���#�����"+�����#���#����#����"�#�#����������*�#�������=� "���� �����3
$ �����#����"�#�#���������8 ��* �����#���������#��"�#�#���������
5. Sales Order Text Lines
-+�����������#�����*���������"�����#"���#���"�#���*�����@�.���A����#�"�����"�����#"���#�����"+�����#���#����#����"�#�#���� �����#�<#� "����=� "���� �����3
$ �����#����"�#�#���#�<#�8 ��* �����#���������#��"�#�#���#�<#�
Warehouse Management Tab
7��#��������"�����#"���#�����"+������#����#�����������#�����F��#�+����������2��������#�"�#���#"��������#�����"+��#�����+�� ##��"��� ���#"����������#���#����#������ ������*�+�����" �." "#��
1. Pick Requests
7��#�"�����"�����#"���#�����"+��#����"��#�����#����������+��#����#��#������=� "���� �����3
$ �����#�����������#������F��#��� ��� �����#�����������#������F��#�.���"���#����.�#���8 ��* �����#���������#��������#������F��#�
-+��������"+������������#��#�����"����+�#����.�#���+��#����#���#����"��#���:���#"����"���5���"�������"�����#"���@.� ��A�
2. Location Driver Processing (R46171)
-+������������"��#�����#������������+��#���5�#�����)�F��#�����"����#"���@�.���A�����#�"�����"�����#"���#�����"+��#�����"����+�#���:���#"���"���5���"���������@)4&$!$A�+��#����#���#��������������"����#������F��#��-+����� �����#�"�+"� ��. ��*��#����#������#���I������!��"����+�#���:���#"����"���5���"���������
=�"������#� �����#���:���#"����"���5���"����������"� ��"�+���#"��������+���������"��#������#���#�#�������"�����#"���#�����"+"���"���#�����#����������
Processing Work Orders and Rate Schedules
3–57OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Staging Location
7��#�"�����"�����#"���#�����"+��#�����+�� #�#��"��� ���#"���+�����"���������#��+�#������������������#��"�*���+���#��������������#������##�"� ���#"����"��#������"#�"������+��#�"������#��#���#��"��� ���#"���#������#�����+�� #��� �����������"#�+���#���-#��08�����:���#"���+���
4. Staging Location Availability
7��#�"�����"�����#"���#�����"+�����#���#����#�������*�#���#��"�� ���#"���+�����" �." "#���-+�����#�"���#����" �. ���#�#���#��"��� ���#"����#���#���������#������#�����F��#����"���#"����� ����� "��#����#��"#���#��*����#�� ���#"����=� "���� �����3
$ �����#�������*�#���#��"��� ���#"���+�����" �. ����#�8 ��* �����#���������#�����*�+�����" �." "#��
Versions Tab
7��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"������#����������#��#�#����#���������������"�����*����3
� ��*�����5"�#����#
� ���#�������#
� 8�����"������#
� -����#���-��������
� 5������������#�������
� 2���+��#�"�������"+"��#"��������
=�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������
1. Work Order Print (R31415)
7��#�"�����"�����#"���#�����"+��#�����"����+�#�����*�����5"�#����#@) $4$6A�#��#�#����#�������������+�� #��F����"���+��#�����#� "#�"�.���������#�"#������.���������+�� #��F����"���+��#�����#"���"�#��#"���".������#"����F���������.���-+����� �����#�"�+"� ��. ��*��#�����������#���Q������$���"����+�#�����*�����5"�#����#�
=�"������#� �����#�����*�����5"�#����#��"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
Shop Floor Management
3–58 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Shortage Report (R31418)
7��#�"�����"�����#"���#�����"+��#�����"����+�#������#�������#�@) $4$�A#��#�#����#�������-+����� �����#�"�+"� ��. ��*��#����#���������#������#�#�"����#�
=�"������#� �����#������#�������#��"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#����������
3. Bar Coding Report (R31413)
7��#�"�����"�����#"���#�����"+��#�����"����+�#���8�����"������#@) $4$ A�#��#�#����#�������-+����� �����#�"�+"� ��. ��*��#����#������#��Q������$���"����+�#���8�����"������#�
=�"������#� �����#���8�����"������#��"� ���"�+���#"��������+��������"��#������#���#�#�������"�����#"���#�������"+"����"���#�����#����������
4. Inventory Issues (P31113)
7��#�"�����"�����#"���#�����"+��#�����"����+�#���-����#���-��������@5 $$$ A�#��#�#����#�������-+����� �����#�"�+"� ��. ��*��#����#���������#"���������#�"� �
=�"������#� �����#���-����#���-����������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
5. Purchase Order Entry (P4310)
7��#�"�����"�����#"���#�����"+��#�����"����+�#���5������������#�������@54 $�A�#��#�#����#����������������#"��������������������+�� #�#�<�����������#���#"��. ��*�#������ ������#"���������#� ���.�#���5������������#����"���#��#��������"+��
=�"������#� �����#���5������������#���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
6. Manufacturing Specifications (P37470)
7��#�"�����"�����#"���#�����"+��#�����"����+�#���2���+��#�"������"+"��#"���������@5 !4!�A�#��#�#����#�������-+����� �����#�"�+"� �. ��*��#����#������#���Q������$���"����+�#���2���+��#�"�������"+"��#"��������
=�"������#� �����#���2���+��#�"�������"+"��#"���������@5 !4!�A�"� ���"�+���#"��������+���������"��#������#���#�#�������"�����#"���#������"+"����"���#�����#����������
Processing Work Orders and Rate Schedules
3–59OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Interoperability Tab
7��#��������"�����#"���#�����"+��#�����+�� #�#����#"���#����#��#�#���#������+������"����<��#�#����#"��������#�����"+�����#���#���#����"#��#���.�+���"�����#��#�����*�����2�#��#�. ��@14��$A������*�����5�#�:"#�#�. ��@1 $$$A�
1. Work Order Transaction Type
7��#�"�����"�����#"���#�����"+��#�����+�� #�#����#"���#����+��#�����*����������#��#�#����#���������������"����<��#�#����#"����-+���� �����#�"�+"� ��. ��*��#����#���������#���+����<��#�����"���
2. Parts List Transaction Type
7��#�"�����"�����#"���#�����"+��#�����+�� #�#����#"���#����+��#�����#� "##��#�#����#���������������"����<��#�#����#"����-+����� �����#�"�+"� �. ��*��#����#���������#���+����<��#�����"���
3. Routing Instructions Transaction Type
7��#�"�����"�����#"���#�����"+��#�����+�� #�#����#"���#����+��#�����#"��"�#��#"���#��#�#����#���������������"����<��#�#����#"����-+���� �����#�"�+"� ��. ��*��#����#���������#���+����<��#�����"���
4. Work Order Header Before Image (F4801)
7��#�"�����"�����#"���#�����"+�����#���#����#����"#��#���.�+���"����+��#�����*������������=� "���� �����3
$ �����#���"�� ����#���"�����8 ��* �����#���������#�"�� ����#���"�����
5. Parts List Before Image (F3111)
7��#�"�����"�����#"���#�����"+�����#���#����#����"#��#���.�+���"����+��#�����#� "#��=� "���� �����3
$ �����#���"�� ����#���"�����8 ��* �����#���������#�"�� ����#���"�����
6. Routing Instructions Before Image (F3112)
7��#�"�����"�����#"���#�����"+�����#���#����#����"#��#���.�+���"����+��#�����#"���"�#��#"����=� "���� �����3
$ �����#���"�� ����#���"�����8 ��* �����#���������#�"�� ����#���"�����
Shop Floor Management
3–60 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Printing a Summary
1���#���5�"��"��1���#"���'��"��#�������@> $�$A����������*�����������
������*���������������#��#"����#�����*�����#��#��������"+��+��#�����*�����2�#��#�. ��@14��$A��9����������#�"����#�#����"�����*����"�������#�����������#�����#���� �����-���"#������.������F���#"#������� �#���F���#"#�������#�#�����������#��
See Also
� ,/01223%���������������"��#���,� ������ ���+�������#���� �
3–61OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Attaching Supplementary Information
(+#��������#������*��������#������� �������������������������+�#��+� ��"��3
� 5����#�����*��������#������� ���"���#�������5���"���.�#��������
� (##������� ����#���"�+���#"���"�#���#"�� �����"�"�+���#"���"�� �������#� "#����#"���"�#��#"��������;�����#�����.�;�����#� "#�"�#����"�#��"#���������"� ����.��
� (##������� ����#���"�+���#"�������� ��
(##���"������ ����#�����#�����"#��+�#���+� ��"���#�*3
� (##���"�������#� "#�"�#���#"�� �
� (##���"�����#"���"�#��#"���"�#���#"�� �
� (##���"�����;�����#�����.�;�����#�@���������+��#�"����� �A
� (##���"���"�#����"�#��"#���@���������+��#�"����� �A
� ("��"����"� ����.�
9���B�����5����#���#��2��������#��#������"���"�+���#"���#��#�������1 ���2��������#��#����.��#�." ��+���#�"� ����*����#���������#"��"�#��#"���
See Also
� '���� ��,�����+�������#����"���#���5��������"�����#"���+��#����#�0�������)�#�������� �����������"�������� �������#������������"���#����#���#"�� ����"�#���#"�� ���##����#�����#� "#������#"���"�#��#"�������##����#����������������#�������5���"��������
Shop Floor Management
3–62 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Attaching a Parts List Interactively
(+#��������#������*�����������������##��������#� "#�#��"#��7�������+�#��+� ��"�����#����#���##��������#� "#�#������*����3�
� ��#������#���@����� A���#� "#
� ���������#� "#�+�����." ��+���#�"�
� ���������#� "#�+�������<"#"�����*����
9������#�������� ���#����#�����#��#�����#� "#����������#��F���#"#"������#���." ��+���#�"� ��9������#����������#����#��������<"#"���"�+���#"���+����." ��+���#�"� �����*�����"�#�����+������ ����#�"���"#���#�����#�����#� "#��(��"#"��� ��������������#�������5���"�������������#�������"�#����#"���#���##����#�����#� "#�#��#�����*������������
(+#�������##����#�����#� "#�#������*�����������������������#���+� ��"��3
� ����"+��������������.#"#�#��"#�����F���#"#"��+����"++���#� ���#"��
� (������� �#����������#
� �������F���#"#"�����#���"�+���#"������#�����#� "#���������.#"#�#��"#�������#��"�F���#"#"�������������������������#���#���"�������#���
(##���"���#�����#� "#�"�#���#"�� �����"#��+�#���+� ��"���#�*3
� (##���"���#�����#� "#
� ����"����.#"#�#��"#���@��#"��� A
� ��#�"����� #"� �� ���#"���@��#"��� A
� ����"�������#� "#�+�������<"#"������
� ����"�������#� "#�+�����." ��+���#�"�
�������.#"#�#��"#�����"�#���#���"#���#���������������#����������� �.��+��" "���"#��#���"�+���#"���"��#���+� ��"���#�. �3
Attaching Supplementary Information
3–63OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5�� ���������� �������.#"#�#��"#���������#����������"�����#"��
+����#�0�����������@54��$ A�#�����"+��#����.#"#�#�
����"���#��#��������#�#������9�������� ��#������+�#��
+� ��"�������"#���#3
� ����"#��"���#�������"#���#����#� ��#�"�2���+��#�"������#��#
� ����"#��"���#�������"#���#����#� ��#�"�2���+��#�"������#��#��.�#�����.#"#�#��+���#���
� ����"#��"���#�������"#���#����#� ��#�"�2���+��#�"������#��#��.�#�����.#"#�#��"+�#��F���#"#�����" �. �����������#�����#���
����?��0��+#�����"#���#"������#���2���+��#�"��
���#��#�)��""���+�����#�"��"��#����?����#����#"��
�+�5�#�:"#��##"���+������#������.#"#�#"���
������� �����������
�����������-+����������������2��������#����������#������#
"#��#����#���������+��"����#���"��#���#��"����
��*����#�� ���#"����-+������"����#���+"�����#��"����
��*����#�� ���#"������"+������"����#� ���#��"����#���
#����#��������#�����"�*��F��#�������"�*��F��#
��#"+"�������+�#��������+����#�"� �+���#�����������
(+#��#����#������#��#����"�*��F��#��#����������
2��������#��#���������"�#��#"����������#�
����#"���+������#�����+"��������#����#�������#�
#�����#� "#�����"������#�����;�����F���#"#��+��#�����
���#"��������������#���F���#"#����������+��#���1��
���#"���
����������;���#��#�����#� "#������#���"#������"��#��
���������#���+� ��"���#�����#"�����������3
� ������*�����5"�#�������@5 $4$6A��"�#�J-��������K�+��� �"#����"#��#�������#���#�"� #�#�������
� ��������5���"���������@5 $4$�A��"�#��������"��"��#"���#��#������������"�*��F��#� ������<"#�������#���������#������#������# "#�
See Also
� '���� ��%�������(�������+������"�+���#"����.��#��"���B�#��"�����#�����#��������#������"��#�<#���#��+���������*����
Shop Floor Management
3–64 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����������������� ��� �
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#�������"+"����*����3
� �*"��#������B��.�
�� ������#�������������#����������5�#�:"#�+���#���)��������
Attaching Supplementary Information
3–65OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*�����5�#�:"#�������������8�2�+���#���1���������
4� ���������������� "�*��G�#�������#���." ��+���#�"� �+��#����"� ����"#�������.����0� ��#�#��#�����#� "#�
6� �����*�����5�#�:"#����"���#���+� ��"���+"� ��#����"+��#��#����������##������#�������#���#� "#3
� )�F��#��
� -#���B��.�
� ��������#�-#���B��.�
� ���"�#"��
� ����E���#"#�
� 72
� :����
� ��������#�8����
� :���#"��
� :�#���"� �B��.�
� :�#�>�
� :�#�5�#����
� ������FR
� 1���5�#����
� ����5�#����
Shop Floor Management
3–66 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 1��>�
� ���>�
� ��������
� -���
� 2#��#
� ����)��
� 1�=
� ��������#�-#���B��.�
� ��������#�����B��.�
� ��������#� ��B��.�
&� �������#�����#� "#�#��#�����*������������� "�*��G�
!� �����*��"#��2���+��#�"�����*������������5�#�:"#�+���#��)��������#����"���#�����#� "#��
%���� @A���������
���"�#"�� (����"�#"�������.�3
� 8"�+�"�+���#"����.��#����"#��� (����*� (���<� ���#"��
Attaching Supplementary Information
3–67OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
:���� (������#��#����#� �����#����#��������� "�������
#����#"����-#����#� �#����#����"#����"���#��
#����#"���"�#�+�����������>���� �:��������.���#�
(�����#�5���. ���(�����#�)���"��. �������-����#��
2��������#��-#�� �����"+"��#�������"#"����������"��
�� "����"�#�������#�����"�"�� �����"���� �� �#"���
�����"�� ����#���+� ��"��3
� �#��*�"#��
� ��.���#
B B��#��*�"#��
1 1�"��#
� ��<#�"�+���#"��
2 2"�� �������������������"#
� ��*����
��������#�8���� (����������� ���' ��� �.�"�����"#�������#�����
#����� ���#��#�������#��#��"��"��#��#��#���.�������� ��#
���#�"������ ��.��"��#������#���#���/�.��1�
�<��� ��������#��#�#�����������#�.�����"������
22�7������#��#����+�22�7��"��#�.����+� ��3
8����05 ��#�'�@22�7A
���#�(�'�@2�7A���#�8�'�@2�7A��.�$� �'�@2�7A
:�#�>� (������#��#�"��"��#��#���������+��� �#�����������"����
#��"��"��#��#���F�� "#���+�#��� �#���<��� ��"�� ����#��
+� ��"��3
($ 5��"�������
(� �������������
���������+���� �#�"�#����"��#���:�#�2�#��#�. �
@14$��A�
:�#�5�#���� (������#��#�"��"��#��#�����#������+�#��� �#����"���"
�<��������������#�����+���#"�������+� ���#�"� �@+�
�<��� ���#��������#�����+�� ���� �"����� �#"��A�����
��#�� ���#������+��� �#�"���+"����"��#���:�#�2�#��#�. �
@14$��A�
Shop Floor Management
3–68 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
������FR (����.������#��"��"��#����������+�����"���
-����#"���"�#��#"���������.��#��#��F������#��
+�."��#"��������. ��#���"��#�������+��#����+���
"#����9�������#��*���#�����������#"���.������#"���
-��." ��+���#�"� �������.��#��#���"���#��#�����#"��
#���"��#���+�."��#"��������. �������#��#��F�"���
���"+"�����������#���#��9�����+"���#�������#"��
�F�������+#���������#��#�����#"���"�#��#"���+��#��
"#�������������1 ���2��������#��#������#�"
���.��"��#���.��*+ ��0��+ ���.������#"��������
-�����"���"��������������������.��#��#��F�����
#������. ��#���+��#������"���"����������
1�����#"#"�������+��#�"���������.��#��#�"���#"+"��#��
�F������"����"������"#���"������ ���#��.����������
�*"�����+"� ��� �������#����#���������#"����F�����
#��#��������#�#��.��"��#����"� ����+�"�+���#"���
9�������������"�� �#������#���.�#������<"#"���#���
1���<��� ������$��6�#��������#���.�#�����#���$�����
$ �
1���5�#���� (����.��#��#�"��"��#��#����"�"������#������
�����#�����+���#"���"����"��#������#�. ��+�����"#���
�����#����"� ��������"���������"+�����#��#�
���������"���"#���#��#������#����#�#����"�"���
�����#�. ����#�����������#���������#�� �������#���
"#���#��#������#����#�#����"�"���������#�. ����#�����
����5�#���� (����.��#��#�"��"��#��#�����<"������#������
�����#�����+���#"���"����"��#�#��#�"������#�. ��+����
"#���
�����#����"� ��������"���������"+�����#��#�
���������"���"#���#��#����������#�����#��#��<����
#�����<"������#����������#�. ��������#���������#
� �������#��� �"#���#��#����������#�����#��#��<����
#�����<"������#����������#�. ��
Attaching Supplementary Information
3–69OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
1��>� (������+"���������@4�0:>A�#��#�"��"��#��#����"�"���
�����#��#�"������#�. ��+�����"#���
�����#����"� ��������"���������"+�����#��#�
���������"���"#����"#�������#��#������#����#�#��
�"�"��������������#�. ��������#���������#�� ��
����#��� �"#����"#�������#��#������#����#�#��
�"�"���������#�. �� ��� �
&���*� �� � � ������� ��������������� ��������������
����1���>��������#����������>����+"� ����+"���#��
� ���. �������+�����"#��������1���>������� ��.�
��#����#����������>������������ ������� �����
#����#��"���#���������F�"����#��+�����������#�"���
." ��+���#�"� ������"#���"�������������� ������
1���<��� ���#����� ����+�#���1���>�����F�� �(�$�
����#����� ����+�#����������>�����F�� �(�6��-��#�"
�����"����#���� ���#"���+��#�"�"#����" �.�������+�
�#�+����"���#��������"����#��#�������F�� �#��(�$�
���� ��#�������F�� �#��(�6�
���>� (������+"���������@4�0:>A�#��#�"��"��#��#�����<"���
�����#��#�"������#�. ��+�����"#���
�����#����"� ��������"���������"+�����#��#�
���������"���"#����"#�������#��#��<�����#��
��<"��������������#�. ��������#���������#�� ��
����#��� �"#����"#�������#��#��<�����#�����<"���
����������#�. ��
&���*� �� � � ������� ��������������� ��������������
����1���>��������#����������>������+"���#��
� ���. �������+�����"#��������1���>������� ��.�
��#����#����������>������������ ������� �����
#����#��"���#���������F�"����#��+�����������#�"���
." ��+���#�"� ������"#���"�������������� ������
1���<��� ���#����� ����+�#���1���>�����F�� �(�$�
����#����� ����+�#����������>�����F�� �(�6��-��#�"
�����"����#���� ���#"���+��#�"�"#����" �.�������+�
�#�+����"���#��������"����#��#�������F�� �#��(�$�
���� ��#�������F�� �#��(�6�
�������� (��� ���#��#�#����#������#��"���������������#��
�����#��+���#�"� �#��������#�+�� ���"#�"��#��
����#"���������#�������#��#�"��� ��������#�0������
8" ��+�2�#�"� �������������#���5 ������9"� ��7���#�
������������#����� �� �#��#�"��� ���.�
��������"���#����"� �������#����+���#��� �#
����#"���#��#���+"#�����#"����7��������"�����#"���"�
��#�0�������)��#"���#�����. ��#����#���#���� �� �#�
#�����������#����������#�
Shop Floor Management
3–70 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
-��� (������#��#�"��"��#������#����#���"�������
��������#�"��#���." ��+���#�"� �+���#��*��-������
1 ���2��������#��"#�"��"��#������#����#���"����
��#�#������*������=� "���� �����3
-� 2���� �"��
1 1 ���#��*�@#����"����"��A
8 8��*+ ���@�����#�����#�"����#����
���� �#�A
5 5�+ ���@�����#�����#� "#�"������#��A
7 �����.��*+ ���@�#�#������;��"�#�����#"��A
� ��.;���#��#�"#���@����#����� "�A
8 ��* ��"���. ������"#��
9�������"�������������#�"������#�������������"#�"�
�����"+"��.����0� ��#�.���"����"++���#���������#���."
�+���#�"� �����#�����*�������#� "#������." ��+
��#�"� ���������"���#���.����0� ��#��� ���
2#��# (������+"���������@ $02�A�#��#�"���#"+"��#�������#
#�#���+�����#"�� ����������#����#�����*�����
����)�� (������#��#�"��"��#��#�������#���""��� ��� ��+��
��������#����#���." ��+���#�"� ��-#�"���� �������"#�
������"���"������������#"���@��BA������"���"��
�����������@���A�
1�= (������#��#�"��"��#��"+�#���F���#"#��������. ��+����
"#������#���." ��+���#�"� ���"�������"���#��#���F���#"#�
�+�#�������#�"#�������������"�+"<������� ���+�#��
����#�F���#"#�����"��� ���� ����#��"���"+�#��
��������#�F���#"#��"��������#��+�#�������#�F���#"#��
=� "���� �����3
1 1"<���E���#"#�
= =�"�. ��E���#"#��@��+�� #A
N E���#"#"������<��������������#�������
��#�#�#� �$��N
1��+"<��;F���#"#����������#��#�����*��������
2�#�"� �)�F�"����#�5 ���"����#��������#��<#����#��
��������#D�F���#"#��������. ���� ���.��#������
F���#"#��
Attaching Supplementary Information
3–71OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������ �� �� ����������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
�����#����#���������#������������#���#�������������������#�����" �. ���.#"#�#������F���#"#���(+#��������#��#���"�+���#"����#����#������#���� ��#���"#�������F���#"#"��#��#�����#� "#����������#�#����F�"�� ��#F���#"#��+���#�����������#��9��������#������#�"�+����� ��"��#� ��#����F���#"#��"����" �. ��
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#������*����3
� �*"��#������B��.�
�� ������#�������������#����������5�#�:"#�+���#���)��������
� �����*�����5�#�:"#�����������"#��������#������������.#"#�#�(��" �." "#��+���#���)��������
4� �����.#"#�#��(��" �." "#��)��""������"���#���+� ��"���"�+���#"��3�
� E���#"#�������
� ��������#�����B��.�
� E���#"#��(��" �. �
� E���#"#�����?���
6� �������#����� ���"��#���+� ��"���+"� ����������3
� E���#"#�������
&� ���� ����#����F�"�� ��#�F���#"#��+��#�����������#�"��#�����#� "#��� "�*�G�
����F���#"#��"��� �� �#����"���#����� ���#��#������#����+���.#"#�#�"#���@+"<�������"�. �����#"� ����������A�
������������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
9����������"+������#������������"#���#� ���#"���+��#���"#����?�������"+����� ��#��� ���#"���#��#�"���#�#����"���� ���#"������"+"������#�����#� "#�#����#������;����"#�#���"#���
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#������*����3
Shop Floor Management
3–72 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �*"��#������B��.�
�� ������#�������������#����������5�#�:"#�+���#���)��������
� �����*�����5�#�:"#�����������"#��������#����������2� #";:���#"��+���#���)���������
4� ����� ��#�2� #"� ��:���#"�������� �#��#���+� ��"���+"� �3
� E���#"#�
� :���#"��
� :�#�0���"�
� 8����05 ��#
������������� ��� ����������A� ���������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
9����������������#� "#�+��������"�� ����#������*����������##����#����#� "#�#����������*�����
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#������*����3
� �*"��#������B��.�
�� ������������������#����������5�#�:"#�+���#���)��������
� �����*�����5�#�:"#��� "�*�#��������"�������#���#�� .��
Attaching Supplementary Information
3–73OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9���3����������"����"��#���#����"���#�#���������#��������+���#"�����#���1�����)����<"#�
4� ������������������� �#��#���+� ��"���+"� ��#����#��#�����*����+�����"����������#�#�������#�����#� "#������ "�*��G�
� 8����05 ��#
� -#���B��.�
6� 2�*������+"�� �����#"���#��#���"���#�����#� "#������ "�*��G�
������������� ��� �����������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
9�������� �����������#� "#�+�����." ��+���#�"� �#��#������#�. "����"��#����*�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ������������������#����������5�#�:"#�+���#���)��������
� �����*�����5�#�:"#�������������8�2�+���#���+��������
4� ������������������� �#��#���+� ��"���+"� ������� "�*��G3
� 8����05 ��#
� -#���B��.�
%���� @A���������
:���#"�� ����#����� ���#"���+�����"���������" �.��������
(��" �. � �������" �. ��F���#"#������.����;�����.� ������"��
����"#���#������#"��������.��*�����(��" �." "#��"
�����+"������������.���#����#������#���.����0� ��#
���#��#�
See Also
� "������ ��%�����������,�����+�������+������"�+���#"����.��#���"���#�������5���"���.�#��������
� ������+�"����! �����,��� ���"��#������������ ��������� ���� ��+��"�+���#"����.��#���*�������#
� ��� � ��#��� �����,�����+��"�+���#"����.��#�����"#���#����#� �����.#"#�#"���"#��
Shop Floor Management
3–74 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Work Order Parts List
MFG Edits
1. Allow attaching Parts List at ____________ prior revision levels 2. Enter the Cross-Reference Code ____________ for retrieving item replacements for obsolete items 3. Enter a ’1’ to allow selection ____________ of components for inclusion on the parts list when performing a Copy. If left blank, all components will be included on the parts list.
Process MFG
1. Enter a ’1’ to create Routings ____________ when creating Parts List 2. Enter the substitute processing ____________ method.
’1’ – Use substitutes for shortages. (Commitment processing will be used if ’1’ is selected.) ’2’ – Display the Substitute Availability Window when substitute quantity can cover the shortage. If left blank, substitute processing will not be done.
3. Enter a ’1’ to bypass ____________ commitment processing. If left blank, commitments will be processed per Commitment Control in Manufacturing Constants (F3009). 4. Enter a ’1’ to copy the ____________ component’s generic text to the work order parts list.
Warehousing
1. Enter the request processing ____________ mode: ’ ’ = No pick request ’1’ = Generate request only ’2’ = Generate request and process using subsystem
2. If processing pick requests ____________ through the subsystem, enter the version of Location Selection to use. If blank, XJDE0007 is used. (R46171) 3. Enter the default staging ____________ location for moving goods out of the warehouse. The parts picked from the warehouse are staged at this location prior to use within manufacturing. 4. Enter a ’1’ if the default ____________ staging location should be checked for availability. If the part is
Attaching Supplementary Information
3–75OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
available at the staging location a request will NOT be generated. This option only applies to parts without work center locations.
Versions
Enter the version of the following applications. If left blank, the version in parenthesis will be used.
1. Work Order Routings – P3112 ____________ (ZJDE0001) 2. Work Order Inventory Issues – ____________ P31113 (ZJDE0001)
EM Edits
1. Enter a ’1’ to require the ____________ entry of the Required Date. Leave blank to allow a blank required date.
Purchase Order Information
2. Enter a ’1’ to allow Purchase ____________ Orders to be created. 3. Enter the Parts List Status ____________ Code to signify that a Purchase Order has been created. 4. Enter a ’1’ to consolidate all ____________ messages onto one Purchase Order by vendor.
EM Versions
Enter the version of the following applications. If left blank, the version in parenthesis will be used.
1. Supplier Master – P01054 ____________ (ZJDE0001) 2. Open Order Inquiry – P430301 ____________ (ZJDE0006) 3. Supply and Demand Inquiry – ____________ P4021 (ZJDE0003) 4. Item Availability by Time – ____________ P3413 (ZJDE0002) 5. Purchase Order Entry – P4310 ____________ (ZJDE0001)
Export
1. Enter the Transaction Type for ____________ the export transaction. If left blank, export processing will not be performed. 2. Enter a ’1’ to write the before ____________ image for a change transaction. If left blank, the before image will not be written .
Shop Floor Management
3–76 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9���3�9������������#�������"�����#"���+���#���-�#���#"���=�"���+�����
�����>?%�$$����#��5 $$$�"��#���-�#���#"���(�� "��#"���+"� ���� "�*�1"����������#��
��������"��������#����������5���"�����#"���+���#���)��������
Attaching Routing Instructions Interactively
(+#��������#������*�����������������##����#�����#"���"�#��#"���#��"#�7�������+�#���+� ��"�����#����#���##������#"���"�#��#"���#������*����3�
� ���������*�������#"���+�������#"���
� ���������*�������#"���+�����." ��+���#�"�
� �������#"���"�#��#"���+�������<"#"�����*����
(��"#"��� �������������#������#����������� ���#��+���#"���"�#��#"���
9������#�������� ���#����#�����������#���"��#�������#"���#��#�#������5���"����������"���������������������#���#����+#��#���"�#���#"����
.�#����##������#�������9������#����������#����#��������<"#"��
"�+���#"���+�������#"���������<"#"�����*�����"�#�����+������ ����#"���#�����#"���"�#��#"����7��#�������5���"�������������#�������"�#������"�����#"���#���##����#�����#"���"�#��#"���#��#�����*����������
��������� ���#��#�����#"���"�#��#"����#����#����"� ���#�������#"���#��#����++��#"����#�#���#�#���#���+�#�����*���������#����#��#����#�����"�#��#"�����#�<#� "����-+���#"���"�#��#"��������#��##������#��#�����*���������� ���������"��#������"�#���+"� ��
9�����#����#���������������+������#���"��#�����#"���"�#��#"���#��#"��� ������.���#��#������#�"��"���#�����#�0�������)��#"��������@5 �� A��(+#��������#�������������"�+���#"������� "���#�����+�����#"���������������������#�#�����������#����#�������5���"���.�#��������#�����#��#��������������
/������B�-+������������#���#�#���+�����#"���"�#��#"�������#"����#����#���������#����� "��#�������������+��#��#�����#"����( ���"+������� �#������#"�������#"����"#��������"�#���������������#����#����� �#��#�������������"+�#����"�"�� �#�#���+�#�������#"������"�����������������#����#����� �#��#���������������"#�����#��#���F���#"#���+�#����� ����+�#�������������+��#����"���� ���#"�������#�������������#�"��#������ "�"�#��#"���
9���B�-+������#����#�����*����#�������� "�� ���#"����#����#�������*�#����*����#��+�����" �." "#��.�+������������������2��������#�
Attaching Supplementary Information
3–77OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Before You Begin
� =�"+��#��#��������+��#�������#�"#����<"#�"��#���-#���2�#������-#��8�����#�. ��
� ��#��#����������#�#����� "���#���������#�#�������+��#�������������"��#�������"�����#"���+������5���"���
�����������������������������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#������*����3
� �*"��#������B��.�
�� ������������������#����������)��#"���+���#���)��������
� �����*�����)��#"���������������.��-#���+���#���1���������
Shop Floor Management
3–78 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� ��������.��-#����� "�*��G�#�������#�����#"���"�#��#"���+��#���"� �����"#�������.����0� ��#�#��#�����*�����
6� �����*�����)��#"������"���#���+� ��"���+"� �3
� ��*����#�
� ����#"�����F�����
� ����#"������"�#"��
� 2���"���)���?��
Attaching Supplementary Information
3–79OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� :�.��)���?��
� ����5��
� -�#��#"���B��.�
� �#�#���#�
� �F�"����#�B��.�
� )�F��#���#�
� ����#"�������
� 5���5�"�#
� �����"H�
� ��#���?��
� 2����?��
� E�����?��
�������� ��� ���������� ��#���������"��#���"������#��� ��������������� ���� ���+��"�+���#"��������#"�����#"���������#�� ��#"���
&� �������#�����#"���"�#��#"���#��#�����*������������� "�*��G�
!� �����*��"#��2���+��#�"�����*������������#������������#���������)��#"���+���#���)��������#����"���"�+���#"������#�����#"��"�#��#"���
�� ������������#"���"�#��#"���"�+���#"���+�������"+"������#"���F�������������#��������"�#���F�����������#������������#�" �+��#���)��������
Shop Floor Management
3–80 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%� ���)��#"�����#�" ����*��#��������"�#�������������� "�*��G��
%���� @A���������
����B��.� (����.��"���#"+�"���#����"�"�� ��������#����"�����.�
���"���"������.�����*��������.���� �����
���.���/���� ���#�����.������������
2���"���)���?�� ����#����������"�������#��#������<���#�#��"����"�
#������� ������#"����+�#�"�"#���
:�.��)���?�� ����#�����������+� �.��#��#������<���#�#��"����"�
#������� ������#"����+�#�"�"#���
������� �.������"��#���)��#"���2�#��#�. ��@1 �� A
���#���#�#� �����#��#�"#�#�*��#������"+"�������"H��#�
���� �#��#�������#"����������������� #"� "���.��#��
����"H����"�������+ ���� �������������#���#"���
�#�#���#� ��"�+"� ��"���#"+"��#���#�#���#���+��"#���#�����*����
��#�����#"���"�#��#"���
����#"������� (������+"���������@ �0��A�#��#�"��"��#��#���#�����+
����#"�����<��� ��"�� ����#���+� ��"��3
( ( #���#����#"��
�� ���� �#"��
-� -� ��#"��
� ��<#�@��#��#�<#��#����"�#"��A
5���5�"�# (������#��#�"��"��#�����#�������*����#����� �.��
��#�"� ����.�#���.��*+ �����#������"#������F���#"#"�
������#������"�#�����#"�������"���"��#�����*
���#���-+����������#����"���#�����#"���������#��
�#������#�����*����#���� �����#�����+�� #��=� "�
�������3
� B�#���.��*+ �����*����#�
8 8��*+ �����#�"� ����� �.�
2 8��*+ �����#�"� ��� �
: 8��*+ ��� �.���� �
5 5�+ �����#�"� ��� �
&���*� �� � � ������� ��������������� ��������������
-+����� �����#�"�+"� ��. ��*��#����#����#"����#����� ��
+���#�����*�����)��#"���#�. ��@1 $$�A�
�����"H� �������.���+����� ��������*�"��#������"+"�����*
���#������#"�������#"���
�����#����� #"� "��#���)���:�.���� ���"��#���)��#"��
2�#��#�. ��@1 �� A�.������"H����"�����#"���#�
�����#��#�#� � �.�������#�
-+�#���5"���:���������"�:���8��#����#������#���#�#�
�.������+��.��*����� "����-+�#���5"���:���������"
����2��#����#������#���#�#� �����"�������+�
.��*����� "����"#���#����"+"��#"���.������"H��
Attaching Supplementary Information
3–81OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
��#���?�� ����#�������#�������#��#������<���#�#��"����"��#��
���� ����� �#"����+�#�"�"#������"��� ���"���#��++��#��
.������"H��
See Also
� '���� ��%�������(�������+������"�+���#"����.��#��"���#���B�#��"�����#�����#��������#������"��#�<#���#��+���������*����
� "������ ��%�����������,�����+�������+��"�#��#"���������"���#������5���"���.�#��������
� ������+�"����! �����,��� ���"��#���"������#��� ��������������� ��������� ���� ���+��"�+���#"����.��#�#�����*������#
�������������������������������������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#������*����3
� �*"��#������B��.�
�� ������������������#����������)��#"���+���#���)��������
� �����*�����)��#"���������������.��-#���+���#���1��������
4� ������������������� �#��#���+� ��"���+"� ������� "�*��G3
� 8����05 ��#
� -#���B��.�
9���3�9����#�. "��#���." ��+���#�"� ����#�����*�����������
����������������� ������� ���������A� ���������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#������*����3
� �*"��#������B��.�
�� ������#������������#����������)��#"���+���#���)��������
Shop Floor Management
3–82 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*�����)��#"����� "�*�#��������"�������#���#�� .��
9���3����������"����"��#���#����"���#�#���������#��������+���#"�����#���1�����)����<"#�
4� ��������.������B��.������� �#��#���+� ��"���+"� ��#����#��#����*�����+�����"����������#�#�������#�����#"�������� "�*��G3
� ��*�����B��.�
6� 2�*������+"�� �����#"���#��#�����#"���"�#��#"�������� "�*��G�
Processing Options for Work Order Routing (P3112)
Process Tab
���������"�����#"���� ����������"+�����#���#����#������#������# "#��������"������"��#�<#���"���#�������"���
1. Create Parts List
7��#�"�����"�����#"���#�����"+�����#���#����#������#������#� "#�����"#����#����#"���+������*�����������#�������#�����#� "#"�+���#"���#��#�����*�����5�#�:"#�#�. ��@1 $$$A��=� "���� �����3
8 ��* �����#���������#����#������#� "#������"#����#����#"���+������*����
$ �����#������#������#� "#������"#����#����#"���+������*�����
2. Operation’s Generic Text
7��#�"�����"�����#"���#�������#�������#"��D�����"��#�<#�#������*������#"����=� "���� �����3
8 ��* �����#���������#������#�������#"��D�����"��#�<#�#������*������#"���
$ �����#������"��#�������#"��D�����"��#�<#�#������*�������#"���
3. Queue and Move Hours
7��#�"�����"�����#"���#�����"+�����#���#���F������������������"��#����*�����)��#"���������@5 $$�A���#��#�����*����#�������#����#�� �����#����� ���. ��*�"��#����#������)��#"���������@5 �� A��=� "���� ����3
8 ��* �����#���������#���#��#���F������������������+���#�����*���#��"��#�����*�����)��#"��������������#����#��� �����#���� ���. ��*�"��#����#������)��#"���������
Attaching Supplementary Information
3–83OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$ �����#�����#��#���F������������������+���#�����*����#��"��#����*�����)��#"����������� �������#����#��� �����#����� ��. ��*�"��#����#������)��#"���������
� �����#�����#��#���F������������������+���#�����*����#��"��#����*�����)��#"����������� ���������������� ����������#"���#����"�#��#"���"��#�����#�" �����+����*�������#"���
Export Tab
���������"�����#"���� �������#�����"+��#���#����#"���#����#��#�#���#������+���<��#�����"�������+��#������� �����"��5 ���"������������ "���"�#���#"���
1. Transaction Type
7��#�"�����"�����#"���#�����"+����#����#"���#����#��#�#����#������+��<��#�����"�����+��#������� �����"�������� "�������5 ���"���������#"��#����"��������+"���������@��0��A�#��#�"���#"+"��#���#�����+�#����#"���+��#����*�����
��#��#���#����#"���#����#�������#�����+�� #��� ����8 ��*�"����� "���� ���"+���������#����#�#������<��#�����"���
Versions Tab
��"�����"�����#"���� �������#�����"+����"�����"����+�#��������"#��:���������@5 $ A�#�����
1. Capacity Load Program (P3313)
7��#�"�����"�����#"���#�����"+��#�����"����+�#��������"#��:���������@5 $ A�������#������#�"�������#��"���#"+��#��������"#�� ����"������*���#��+�������"+"������#"���"��#�����*�������#"����-+����� �����#�"���#"��. ��*��#����#������#�����+�� #���"���Q������ �
9���3�9������������#�������"�����#"���+���#���-�#���#"���=�"���+����������
>?%�$$����#��5 $$��"��#���-�#���#"���(�� "��#"���+"� ���� "�*�1"����������#��������
��"��������#����������5���"�����#"���+���#���)��������
Shop Floor Management
3–84 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Attaching Co-Products and By-Products
1��5����2���+��#�"�����+#��������#������*�����������������##�������;�����#�����.�;�����#� "#�#��#�����*�����
����������������� ��������������
1���#�����" ������5����#"���;�5���������@> $$ A����������#�0����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ������������������#������������08��5����#�+���#���)��������
� �����*�����5����)������)��""������"���#���+� ��"���+"� ������ "�*��G3
� -#���B��.�
� ���8�
� ���"�#"��
� E#�������0���#��#�E#�
� 72
Attaching Supplementary Information
3–85OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
���8� (������#��#��"#"���"���#��������������#��
"����"��#�+�����;�����#��.�;�����#�����
"�#����"�#�����;�����#����@�������#A�����"#����
#����� #��+���������8�;�����#����"#���#��#�����.�
���������#�����#����+���������.�#�������#�� ������
-�#����"�#�������#����"#�����+"���������� #��+��
#���.�#������#���#"�� ����������"��#���+� ��"���#���
>���� ���"�#����"�#��������#��*�"#������������ �
��+"����#����"#�������;��"�#�+�����#"���������
�#��������������#�@�"��#��2���+��#�"��A��
"����"��#�@5����2���+��#�"��A��������������"��
#��������#"���������=� "���� �����3
� ��;�����#
8 8�;�����#
- -�#����"�#�������#
8 ��* �#��������������#���"����"��#
E#�������0���#��#�E#� ����F���#"#���+���"#��++��#���.��#�"�#����#"���
Attaching Intermediate Items
1��5����2���+��#�"�������"�#����"�#��#��#��*�#���F���#"#���+���#��#��+��������#"���"������*����#���#������"+"��#"����9���������+"���"�#����"�#�"���"++���#���"#��+�����������F���#"#"���9����#��������"�#����"�#��������#"����?����������������#���+"������"�#����"�#��+��#��� �#�����#"���
(���<��� ���+����"�#����"�#��"�+����#��� "F�"������� "F�"��+����#�+�����<#��������"����+�#"���.�+���.�"����"#" ���������� #"��� "F�"��"���#��+"�"���������#��.�#�����#��#��������#��#�����<#�����#"���
��������������������
1���#�����" ������5����#"���;�5���������@> $$ A����������#�0����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ������������������#����������)��#"���+���#���)��������
� �����*�����)��#"�������������"#�������������-�#����"�#��+��#���)��������
Shop Floor Management
3–86 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� ���-�#����"�#��5����#�)��""�������� �#��#���+� ��"���+"� ������� "�*�G3
� -#���B��.�
� 72
� E���#"#�������
%���� @A���������
E���#"#������� ����F���#"#���+���"#��++��#���.��#�"�#����#"���
72 (������+"���������@��072A�#��#�"���#"+"��#�����"#��+
��������#�+����������#���F���#"#���1���<��� ���"#
���������#���.�� ��.�<����."����#��� "#�������������
���
Attaching Supplementary Information
3–87OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Assigning Serial Numbers
9����"����"� ����.��#����*�����#��#��*��"� "H���"#����"#�"�� �#�9��������"����"� ����.��#����*������#�����#"���������������#���"� ���.���#����#������#����"� �B��.��2�#������������ �����*����:�#0��"� �B��.��@:�BA�������#���������#��� "��#�������"� ���.��#��#�������#����#" ��������� �#��#�����*������-+����������#��"�����"� ����.��#�����"� "H������. ���#����#����F�"�������.��.�+�������������� �#��#�����*������(+#���������� �#������*���������������#���"+�������"� ����.��#��#�����"�����#��#������. "��
9��������"����"� ����.��#�����"+"�����. "���#�����#"����"��#����� �#"���#�����*�����.���"���("�����*�����:�B��9�������� ��"����"� ����.��#�����"+"�����. "���#�#���#"����+���*�������� �#"���.���"���(��"�#��-����-#���:�B��9����������"�#���"� "H����������#�#�������"+"�����. ���"#����#�"����#���"������#���*�������� �#"����9�����#�"����"� "H�����������#�"��#��"�����#"����"�����"#��+�������#�����"�#��#����#�������"+"�����. ��
����(��. ����"� �B��.��������@5 $�6A��������F���#"#���+�����"��#����"#��+����������#�����*������1���"� "H������. "���#�"��" �.��#���"������"#��+��������9��������#���#�������"� ����.��#����#��F���#"#�����#�����*�����
9���B�9��������� ���� �#���"� ����.��"+�#����#�����#��#������#"�"#��+��#�����.��
Before You Begin
� ��#�#���:�#�5���������������"� �B��.��)�F�"���+"� �����#���-#��2�#��-�+���#"���+���+���"� ����.������"��������'���� �������������������� ���"��#������������������������ ���+����#�" ��.��##���-#���2�#��-�+���#"���+���
���� ���� �����������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
( #���#"�� �����������������(��. ����"� �B��.��+���#�����" �����5����#"���'��"��#�������@> $$$A��?�������"+����������(��. ����"� B��.��+���#��������������������"#��� ��#�� ���#���<"#"����"� ����.��
Shop Floor Management
3–88 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9��������#�����#���������"� ����.����������������#�"��������"��# �+���#��������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"���#�� ���#��#�����*�����#����"����������#�#���"����"� ���.�3
� �*"��#������B��.�
�� ������#�����*����������#������������"� �B��.��+���#���)�������
� �����*��"#����*�������"� �B��.���������)��""���+���#��1��������
4� �����"� �B��.��)��""����������:�#0�B�>����#"���+���#���1�������#���"����"� ����.��
Attaching Supplementary Information
3–89OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6� )��"���#���+� ��"���+"� ������� "�*��G3
� :�#�0��B
� 2����:�#�$
� 2����:�#��
Shop Floor Management
3–90 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Grade and Potency and LotProcessing
Shop Floor Management
3–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Grade and Potency and Lot Processing
>����"���#"+"�����"#��D���#"�� �����"+"��#"�����*�����5�#�����"���#"+"��#�������#�����+���#"���"����"��#��"#�"����� �#"����:�#�����"���� �������#��������������"�#�"��"�+���#"����.��#�������+�"#����
��*"����"#�������������#��������� �#�����"������"#��+�#���+� ��"��#�*3
� 7���#���"��������������#����
� 7���#���"��� �#�����"��
Shop Floor Management
4–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Grade and Potency
2���+��#���"��#��������"���#�������+� ����#� �����#���F�� "#���+�����#�#��#�#������*����.�����<��� ���+������"���#"��"�� ����#��+���������"�� ��������������#"�� �"���#"���>����������#�����F�� "+"��#"��� �������#����#���"H�����������#��������"+"�� ������#����#��"�������#�#������#�������+��#�"��������"#".�#"����������
-��������������#���������������#����������#�� ���<� �"����9�������� �����������#����#���#����#���"H�����"#����( �"#���#��#������������#��������#� �����#�� ��.��#��*���.�� �#����.���>����������#���"��"�"���"#���.��#��"����"+"����*�����������#�"#"���"#���#������"���"#�����.���:�#�"���#"+�������"+"��������+�"#����"#��#�������"#������.���������������#�����+������� �#�"�����.��������#��#��� �� �#����������������" �. ��F���#"#"��
7���#���"��������������#��������"#��+�#���+� ��"���#��"�3
� ���#�"�����C
� ���#�"���#����C
� >����������#��������#�
� :�#������"� ����#� �"#��
1�������������#��������#� ���"#��������������#����#������@��+���A�� ���+�������"#����9�������� ����#����������+������#�. ���� ���#��#�� ������#�����#"��������#"����"#�����������#���"��#��#������#"���#��#�������� ����.�#�#" ������#�. ��+������������"��� ��#���#�. "�������"�#�"��F�� "#�� ��� �"�����������#��.�#�"�+ �<". ���������#��*�����������#"������"��������#���#������ ��� ��+������#�"���#����" �. ��
�� ��"#���#��#����#�#������������#�����������F�"����#�#�#���"��#���." �+���#�"� ����"����#��#�������+ ���+�������#"������������#���#"���#��������" ���#����������" �. ������;�����"����#�"� �"�F�""��+�������1 ��2��������#�
�����#�����������������#��������� �#�#��+��#����#"���"��#���"#�� ���������#�������� � ��������#��#�������#"���"�"������#���"�#��#��#��*"���
9������������� ������#�"�����������#������+����"#������ ���������������������#������������#�������������#�����#���������������
Shop Floor Management
4–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
What is Grade?
>����"���#"+"�����"#��D���#"�� �����"+"��#"�����*��������� ���#����#��#������#������ �#�+����#��������#"��� �#��"#���#������"���#���"#�����.����<��� ���+�"#���#��#���������������"������� ��.���������#�F��"���
9���������������#��� �"+��"#���.��#��"������#�"#"���������F�� "#��#���#�����"�#��"#���-+�������#"��#����������#� ����#�"���#���+���#"�����"+�����������" ���#���+���#����#"���"+�#���"#���"��� ���������#����#�#������������#��
What is Potency?
5�#������+��#��#��������#�����+���#"���"����"��#��"#�"����� �#"�����������4�N�� �#"����+������� �"����"��� ���.�������#�����������#�����+� ���� ��������++����"#�����"��������#��+���++�"����
Grade and Potency Control
9����#����#���+� ��"�������;�����#����;����#� �+"� �����#���>���05�#����)��""���+���������#������#�������#� �+"� ���� ���������������#���.����0� ��#������+��#���"#����
)����*������������� ��#��"�������#���"������������#��������#� ��
"#���"���� ������2��������#�
�������/������ -���#"+"�����#���#���"#���"���#��������#� ���
)�����/������ -���#"+"�����#���#���"#���"���������#� ���
5�������������� -���#"+"��#���#�����������#�����+���#"���"����"��#
���� ��+�����"�����"#���������� �����#�������
���"���#�����+�� #�+������ �+���"������������
2���+��#�"����#����-����#�"�������#�����#����
#������"�����+��#�����#��#���"#��+������
�����"���
5��������)���� -���#"+"��#���#������������+�#���"#�������������"��
���������������� �����#�����������"���#�����+�� #
+������ �+���"�������������2���+��#�"����#���
%��������������
������
��+"���#���� ���. ����#����������+�����"#���
Understanding Grade and Potency
4–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%��������������
)����
��+"���#���� ���. ������������+�����"#���
9�����+"���#����� ���+����������#��#���"#��+��������������#��#���"#��+�����������"���"�������+"���������#�. ����+� ��3
� ��+"���#��������+"���������+��#��������#��#������" ����"��#�������+"��������� "#�4�0:>�
� ��+"���#��������+"���������+��#�����#��#���"#��+�������"��#�������+"��������� "#���072��1���������#��#���"#��+�������#��#�������+"���������#�#����5�"��#���������������+�#�������"� �?��� "��������+"� �� ���#������#���7����+"���������+���
� ��+"����������"���+���������#��#���"#��+�������#�������"�� ���"#��+���������#���7�"#��+�2����������"���+����1���<��� ���$���� ����+���� �#"����#���N���#�����M������#��#��� ���������#��#��� ���+���� �#"����#���N�M�$����� ���
See Also
'���� ��������������"�������������� ���"��#������������������������ ���+������"�+���#"����.��#������������#����
Lot and Serial Control Items
7��#���-#���8�����)��""���+���#��"���#"+��#���"#������� �#;����"� ;���#� ���"#����>���;�������#����;����#� ���"#�����#�.�� �#����#� ������������"���#"+��#���"#������� �#;����"� ;���#� ���"#������#�������+�#��+� ��"����� ���"��#���:�#�5���������+"� �3�
"���� :�#��"�����#�"���#"��� ��B��.����#�.������� �
�"������E���#"#������.�����#��#��������
, :�#��"�����#�"������B��.������"�����.��#��
�#����"���#����#�����#��"��9922���+���#�
E���#"#������.�����#��#��������
1 :�#��"�����#�"������B��.������"�����"�
�����"����F�������"�����<#����.���E���#"#������.�
���#��#��������
0 :�#��"�����#�"��F�"����B��.����#�.������� �
�"������E���#"#������.�����#��#��������
Shop Floor Management
4–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
> ��"� ����.���"�����#�"���#"��� ��<���#���"��
�"����#����+"��#"����E���#"#����#���#��<�����$�
: ��"� ����.���"�����#�"��F�"���������#����"��
���.���"���#����#�����#��"��9922���+���#�
E���#"#����#���#��<�����$�
' ��"� ����.���"�����#�"��F�"���������#����"��
���.��"�������"��������"�����<#����.���E���#"#�
��#���#��<�����$�
3 ��"� ����.���"�����#�"��F�"����9�����#������ �
�"������.���E���#"#����#���#��<�����$�
����������##��������#� "#�#������*������������#����#������#�����"#���#�+��#�����������#��?���#��������"#���#�������#������������#��������#���+�����"#���#�2�#���������"#���#����#� ������?������+#�����"#��(+#�������#����#���������#�������"#���#�����.�����#���"�#��������������"���.�#��#�����#�0�������������������5���"��������
��������"#���"���+"������ �#����#� ����#����#��������#�����������#����������#��#�����#� "#������ ����� ��#���� �#��"#�"��#�������� "�". ��+������"#���#��(������"�"���F���#"#"���������"##���#��#����"��� ���#"���
4–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Lot Processing
:�#�����"���� �������#���������"�+���#"����.��#�������+�"#����1��<��� ���+��������+���"��. ��"#�����������������#����#����"��� �#���.��.����������"�#���#��#��"���#"+��#���"#���#��#�������#�� �+"#��9�������"�������#�"�+���#"����.��#������ �#��������#���F���#"#���+����" �. �"#�������#���#����#"���#��#�������++��#���#��� �#��
7���#���"��� �#�����"������"#��+�#���+� ��"���#��"�3
� 7���#���"��� �#����#"��
� 7���#���"��� �#�#�#�
:�#����#� �"�.���+"�"� �+��"���#"+�"���������+�"#���#��#������������#��+��+"�� ������#��1���<��� ���"+������"��� �#����.��#��.�#��."��� ��#"�����."��� �����. ���+���#���#"��������������#���+� ��"��3
� -���#"+��#��� �#����.��+��#���#"��#��#���������"��#�������+��#����+�����"+"��."��� �
� -���#"+��� �."��� ��#��#�����#"��+��������"+"�� �#
-+����� �#��+"���#��#�����#"�� �� �#��+�#"��"���+��#"������������"����"�#� �"���#"+��������� �� �."��� ��#��#�����+���#��� �#��+���+��#"���#"��
(� �#���� �����#�"������#�����+�"#����.�#����������#�����#������#��#�#�� ����"++���#�#�����+�"#���"��#������� �#��-+��� �#����#�"���"++���#�"#����#���#�����"�#�"�� �#�"�+���#"���+������� �#����.������"#����9�������� ���#����#������#��#�#���#"�#��� �#�#������#�����+�"#�������#" �� ���#��#� �#�#��<"#�"���� #"� ����������
-������+��#�"���������������� �#��"#���#���� #"� �� �#�"��"����#���+����"�� ����*������������������#��� #"� �� �#����� �#"����#����#��� "�*��#�"� �"����#��#�����*�����#��#������� �#���"#���.�� �#����.�����*�������.�����.�#���-+����������#���#��#��� �#����.���+�#�������"#����#�#��#"����+�"����#����#�������� ��#�����*��������.��#�� "�*�#����������#�#��#�������"#���
�<�"�#"���� ���"������"���#����<�"�#"�����#���+� �#���" ���� �� �#"���#����;�����F���#"#�������������#��� �#�F���#"#"��"��#��������+��<�"�#"����#������#�"�� �#��"#��#�����#�����#��<�"�#"�����#�������������+"#���"�"�#���+"#;"���+"#;��#�@1-1�A���#����
Shop Floor Management
4–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�<�"�#"���� ���"���"�"���#��#�.�������������"��#������"��������"����+#��������#������"#��<�"���"����#��� ���(����#��� ���"����+����#"����������������#������� �����"���#��#�#���<�"�#"���� ���"���.�����������#��#���*��"#�#������#�����#"�����"��+���#������ "������+"�� ��#��#����#����.�+���#����<�"�#"�����#���-+�������#��"��#������"��������#�������#�#�������� ����#� ��#�������#��"������ ��
����������#�#��������"�#������"�����#"�������������������+��#�"��� ���"����#��3
� �����#��<�"���F���#"#"���+�"#���+���#�����;������� ��
� ����������"���������#��#�"��������"��#���25�02)50�)5�2����#�. ��@1 4$$A
� (�/�#�#���#"����"��#���+ ��#�#����<�"��������#D��++��#
9�������������� ���#����#���"��� �#����.��#��"#����1���<��� ���������3
� ?����#����#����"��� �#����.�
� ("����������� �#����.�
� ("������ "�� �#����.�
�����#"���#��#�����#��#����#���� �#��#����#��������������#��#���:�#�2�#�#�. ��@14$��A�
See Also
� ��� � ��������#��������"��#������������������������ ��+�"�+���#"����.��#�� ��"����"++���#�#�����+�"#���"��#������� �#
Understanding Lot Processing
4–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Understanding Lot Creation
9����������#�� �#���#���#"�� ��������� ���9����������#�� �#���#���#"�� ������������������+�#���+� ��"��3�
� ���#����������������"�#
� ���� �#����*����
� (�/�#�"����#��
9����������#�� �#������ ����"#���+���#���:�#�2�#��)��""���+�������"����*�������#��
������#�� ������������#������+��� �#�"���+"����"��#���:�#�2�#��#�. ��@14$��A�9���� �����#���:�#�2�#��)��""���������#�����"+��������������+������������#�������������-�����"#"�������������������"�����#"���#����#��#�����������#�����+���.�"�������#���
:�#���#��"�+���#"���� ��"�� ����#��� �#D�#�#�������<�"�#"�����#���9�������"������#��#�����#����������#��#��� �#�+�����#"���������������#��#���� �"�+���#"����.��#� �#�"��#���:�#�2�#��#�. ��@14$��A�
See Also
� '���� ��!���������� ��"��#������������������������ ��+��#���#��#����#�� �#�"�+���#"���+��"#�������#����#��"�+���#"���+�� �#
Understanding Lot Status
(� �#D�#�#����#��"������#���"#�"����" �. ��+��#����#���#�������������� �#�"������ ��+������������#����#���������#������"#��� �������#"��#��������"�����#"���#��#�� �������"����+��� �� �#��
9����#���� �#�#�#�������#��"���#"+�������#��#��� �#�����.����#������ ��(+#�������#����#������������������"���#����#��"#������� �#�#������"#����#��"�+���#"����.����0� ��#�"�+���#"������������������"�#������ �#��#����""���
9��������"����"++���#�#�#�������#����"�� �� �#�.�������#����"++���# ���#"���"����"���#��� �#��"������*"����"#��#�#�������"��� ���#��+� ��"��3
� ��##"������ �#�#�#������
� ("��"���#�#�������#���"++���#� �#� ���#"��
9����#���� �#�#�#�������"��#���:�#��#�#�������)��""����������9����"��#�#�������#���"++���#� �#� ���#"���"��#���:�#�2�#��)��""���������
Shop Floor Management
4–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9����������:�#��#�#��7���#��#��� �����<�"��� �#������ ���9����������#��������"�����+���+"�� �������-+��������#���������"�����+��������������������������#����"���� � �#�#��#��" �.����#������ ���-+��������#��������"��+"�� ���������������������������#����"���� � �#�#��#������.�����#������ �����#���� �#�#�#�������"��#��������+"��������� "#�4$0:�
9����"��� �#�#�#���������������#���+� ��"��3
� ��#�������� �#��"���#���:�#�2�#��)��""���+����-+����������#���#���#�#���#�#�"�#"����#����#������#��� �#�#�#��+���#���"#��D�.����"�+���#"���"��#���-#���8�����#�. ��@14$��A�
� ��#���������� ���#"���+�����"#����"���#���-#���8����05 ��#�-�+���#"��+���
9����"��� �#�#�#����"���#���+� ��"��3
� ���� �#�#�#�������+���#��#� �#D������"��#���:�#�2�#��#�. ��@14$��A
� ������+�� #�#�#��+���#���-#���8�����#�. ��@14$��A�"+���� �#�#�#���<"#
9��������"��� �#�#�#���#���"++���#� �#� ���#"����"���#���:���#"���:�#��#�#��������+���+���#���:�#�2�#��)��""����������������������#���� �##������#��+��+������#��� ���#"����#����#����"���#�#�����"���#��#�#��������+�#���1��� ���#"����9��������"���#�#�������#�� ���#"���"#���#��"��� �#�����#���#����#���������"#�����#��+� ���#"�������� ��������������������#�#�������"�����#"���
7��#���+� ��"���#�. ��#����#��"����� �#D�#�#��+����� �����#���:�#�2�#����������-#���:���#"���������
.����� ����$%>,&<( -+�������#���� �#�#�#�����#���:�#�2�#��)��""���+���
#����#������#��#� �#�#�#��
-+����������#���#���� �#�#�#���#����#������#�����+�� #
�#�#�#��+���#���-#���8�����#�. ��@14$��A�
����.�������$%>,&1,( -+�������#���� �#�#�#�����#���:�#�2�#��)��""���+���
#����#������#��#� �#�#�#��
-+�����������"����� �#�+������#��� ���#"����#����#��
���#���+� ��"����F������#���"����� �#�#�#�3
� �����#������#�����+�� #� �#�#�#��+���#���1�� ���#"���
� -+��� �#����.���<"#��#����#������#��� �#�#�#�+���#���:�#�2�#�������
� -+���� �#����.���<"#��#����#������#�����+�� #� �##�#��+���#���-#���8�����#�. ��@14$��A�
Understanding Lot Processing
4–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� %��� ��� �+!����� ��� � ��"��#������������������������ ��+��#��#���#���"��� �#�F���#"#"�����#"�"#����#�������#�#��
� 4 �� ��!��5������� ���"��#������������������������ ��+��#���#��#���#�������"���������"�#� �#�#��������#��*�"�+���#"��
� ,������ �� ��!���"��#������������������������ ��+��#���#���#��� �"+�� �#
� %��� ��� �+!����������"��#������������������������ ��+��#��#���#���#���� �#�#�#������������"���#����#���"++���#� �#� ���#"��
Shop Floor Management
4–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Commitments
Shop Floor Management
4–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Commitments
(�����"#���#�"�������#"���+��#�����#�#��#������������������*�����9���������+"�������"#���#�.��.���������*����#���9�����������������"#���#������ ����#��������.�#����������
��*"����"#������"#���#����"#��+�#���+� ��"���#�*3
� ��+"�"���#�������"#���#�� �
� ��+"�"�������"#���#��#�����*����#�� ���#"��
� 2����"�������"#���#�+�������������#����
� )���#"�������"#���#
����������##��������#� "#�#������*������������#����#������#�����"#���#�+��#����F�"���F���#"#���+��������������#����������"#���#�����#�����#�"� �+������#"�� ����*����������#�����+�����"#���#�#��##������������#��@�������+#A�������������"�������"#���#���#"���#��#�������"+"���"��#���2���+��#�"������#��#�+���
� (���������"#���#����"�� ����"���#��"����#���"�������"+"�� ���#"��#������#"�� ����*������
� (��+#�����"#���#�� �������#��#��#�#"�� ������"#�#���"����#���#�����*����������"����#���"���#����"�� ���#��"��������"��#�.�����+�����#�����*��������+#�����"#���#�� �����. ������#����������#�"� �#��#�"��������+������#���*�����#�����" �. ��"����#����
����������������#���� �������#�������������"#���#����+#����"#���#�"������*���������������� �#�#����#����������#�������"#���#+����+#�#��������������������#�����*������9�������� ���#����#���#���#��� �������+#�����"#���#��#�#������#"����+�#�����*����������������"#�#������������"#���#���#���#�#���#���+�#�����*��������������
-+���#�����#"����#��� ���#"������"+"������#�����#� "#�"���#�#����"���� ���#"���#����#�����������"#�#��#� "���"#���
-����#������"������"##�����#" �#����#��������#���"����������#���#���������#�����;�����F���#"#������#�������"##���F���#"#"��
Shop Floor Management
5–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����-����#���-���������@5 $$$ A�� "��������"#���#��8�������+����"#���#�#��#���� "��� ��� �����������"����������"����#���+������������ ���#"����#�������"#���#�"������( ��������������#"� ��"���������"����#���#�����"++���#� ���#"����#����#���� "����#�������"#���#+���#���� �� ���#"�����������"#�#������"�"�����#�"� �#��#������� ���#"���
-+�������� �#�����"����#����#������#������"#���#�.�������#��� �#�<�"�#"�����#����������������#����������+��#��� �#����.��
������#� "#�+��#�����*������"��#����"+����������+����������#������ ���#��#�����.���������#�������������#�������"#�#��� �#��+�#�����������#������"#�"��#��������#��#�������+"����+��#���"#���������#�������� ������"����#���#��#����������+��#�������"������#�"���F�������1���<��� �������"��#����#�#�����"+�������"+"�� �#����.�������������#�����
7��#���+� ��"���#�. ��#��"���#"+��#�������"�����#"������" �. ��+��.�#��#����#�0�������������������5���"���������
@����*/������2���� 7"���#�����#�0�������������������������
��#���#"�� �������#��#���+� ��"��3
� )��#"���"�#��#"����������������#��#�����#� "#�� "��
� 5�#� "#��������������#��#�����#"���"�#��#"���� "��
2��������� ��� 7"���#�������5���"���������������������"+�
�"#���#�����*������++��#"�����#����#�#���#��+�
�++��#"�"#������*"����9���������#���#"�� �3
� 7���.#"#�#��+��"#�����#��+�#��*�����. ��*�#����� ��������"��
� >����#��#�����#� "#������#"���"�#��#"�����.�#�
See Also
� !��"������ ��
� ��������"������
5–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#��#�����#"��������+����#"���#�����*������������##���"���#���������*������"�#���#"����"#������"����#��������#���#������������������#���"�����"�#�"��#��������#����#�������"#"����#���
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Completion toInventory
Super Backflushing
Integrate with Payroll(optional)
Shop Floor Management
5–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining the Commitment Rules
���������#� "#�"��##������#������*�������������"#�������� ����.���"��#���.�#����������#����#�����#���#"�� �����#������"#���#�+��#����������#��
�����������+"�������"#���#�������#����#��������#��#��#���#��"������#�������"#���#�"����#����-+���������"��� �#����#� ����������� ������������"#���#�.�����������#������9������#�����"#���#���������������#�� �������"#���#�������"���F���#"#"��#���#�����*�����
���������"#���#�������#�����"#�������� ����.���"���#���.�#�������������������#"��#��������"�����#"���#����"+��"+��.#"#�#���<"#�+�����"#���������������#������"#���#������ ���#���"#������.��"��"�� "��#�����"��#����##������#�������9�����#��������������"#���#��#�#������#"����+����*��������#��"�*�#"���#������.#"#�#��
������������#��������"#���#��"#�������� ����.���"���#���.�#���������������#���+"�������"#���#�� ��+��#�����*�����.������ �#"���#��+� ��"���#�*3�
� ��+"�"���#�������"#���#���#����+��#���"#��
� ��+"�"���#�������"#���#����#� �����#�����+�����"#���#
Shop Floor Management
5–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining the Commitment Method for the Item
9�����+"���#�����#����#��#�#����#��������������#"���������"#���#�2�#���������+"����.�� ���#"���� �#����.����� �#��<�"�#"�����#���
��������������������������������������
1���#���-����#���2�#�0�����#"��������@>4$$$A��������-#��8����05 ��#�
$� �����*��"#��-#���8���������� �#��#���+� ��"���+"� ������� "�*�1"��3�
� -#���B��.�
�� ������������������ "�*��� ��#��
Defining the Commitment Rules
5–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���-#��08�����5 ��#�-�+�������� �#��#���+� ��"���+"� ������� "�*��G3
� ����"#���#�2�#���
������"����������#�������"�����#"�������#���#���+����"��#�������������#���+� ��"��3
� ��*��"#��-#���7�"#��+�2����������"��
� ��*��"#��5�+������8���5"��
� ��#�)��""��
4� )���� ���+�#���+���#��#��������� "�*��G�
(+#���������� �#��#����#������+"���#�������"#���#����#� �����#�����+����"#���#�+��������*�����
Shop Floor Management
5–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
����"#���#�2�#��� (������#��#�"��"��#��#�����#����#��#�#����#������#�
����"#� �#�"#���+���"����#����=� "���������3
$ �������� �����"#���#���#����+��"����#���
�����#�������"#�"����#���+���#����"���
���#"�������#����+����������� ���#"�������
�#�������"#�"����#���+���#��� ���#"��
�"#��#�����#�"����#���.�+�������"##"��
"����#���+��� ���#"����"#��#��� ��#�����
�#�������"#�.��*����#��#����"���
���#"���
� ����"����#�������"#���#���#����.�� �#
���.��������#�������"#�"����#���.�� �#
���.���#�#"����"#��#��� ���#� �#����.�����
����"##"�������#�����" �. �� �#�
����"����#�������"#���#���#����.�� �#
�<�"�#"�����#��������#�������"#�"����#��
+���#��� ���#"����"#��#����� "�#��<�"�#"��
��#��+"#�������#������"����� �� ���#"��
�"#���<�"�#"�����#�����#��#�������F�� �#��#��
� ����������#� "#��F��#�����#��
Processing Options for Item Branch/Plant
Process
1. Category Codes ____________
Blank = Do not display screen 1 = Display screen 2. Quantities ____________
Blank = Do not display screen 1 = Display screen 3. Additional System Information ____________ Blank = Do not display screen 1 = Display screen 4. Item Profile Revisions ____________
Blank = Do not display screen 1 = Display screen 5. Cost Revisions ____________
Blank = Do not display screen 1 = Display screen 6. Price Revisions ____________
Blank = Do not display screen 1 = Display screen 7. Unit of ____________
Blank = Do not display screen 1 = Display Unit of Measure screens
Defining the Commitment Rules
5–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Workflow
1. Workflow (FUTURE) ____________
Blank = Do not activate Workflow 1 = Adds 2 = Changes 3 = Adds and Changes
2. Allow Changes (Restart ____________ Workflow) (FUTURE)
Blank = Do not allow additional changes 1 = Allow changes to the record and restart Workflow
3. Logged as History Record ____________ (FUTURE)
Blank = Do not log item as a history record 1 = Log all additions and changes as history records
Versions
1. Summary Availability (P41202) ____________ Blank = ZJDE0001 2. Item/Location Information ____________ (P41024)
Blank = ZJDE0001
Interop
1. Transaction Type ____________
Blank = No outbound interoperability processing 2. Before/After Image Processing ____________ Blank = Write only the after image 1 = Write the before image
Defining the Commitment Control and Type of Commitment
9���������+"���#�������"#���#����#� ���#��������#�����+�����"#���#�+��#����*�������������#� ���#��"�������#����#�������"#�"����#���#�����*���������� "�"#�#���"����#��� ���#"���#����"�������"#���#�������������#�������"+"�����#���#�������"#���#�"��+#���������#�#���#��+#���� �#��.�����������
Shop Floor Management
5–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����������������������������������������������
1���#��������1 ���2��������#���#��������@> $4$A��������2���+��#�"�����#��#�
(+#��������+"���#�������"#���#���#����+��#���"#������+"���#�������"#���#���#� �����#�����+�����"#���#�+��#�����*�����
$� �����*��"#��2���+��#�"������#��#������ �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#��8����05 ��#
�� ������������������ "�*��� ��#��
Defining the Commitment Rules
5–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���2���+��#�"������#��#�)��""����� "�*�#�������"#���#����#� �#�.����#���������������+�#���+� ��"�����#"������������"#���#����#� 3
� 5"����:���#"��
� �� "#'���8�����.�����"�
� �� "#'���D#����8�����.�����"�
-+������������"���� ���#"����#����������" ���#�� ��#� �#�
-+��������#�#��� "#� ���#"�������������#�����#"����9��������"#�����"+������"#���#������"++���#� ���#"����"#�"������.����0� ��#������"+������"#���#������"++���#� ���#"���+����"++���#.����0� ��#�
4� �����������+�#���+� ��"�����#"��������?��0��+#�����"#������ "�*�G3
� ��+#��?���������"�#"��
� ��+#��#����#"����+�5�#�:"#
� ?����#����#"����+�5�#�:"#
-+���������.#"#�#���������#����"+������������"#���#�
Shop Floor Management
5–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
����"#���#����#� (����#"���#��#���#��"�������#����#�������"#
"����#���#������*�������������"+"��#���"����#��
���#"���#����"�������"#���#���������������#��
��#"��#��#�"�+"� ���� ��������������#�����
����"#���#���������#"���������" �. ����+� ��3
� 5"����:���#"����2�*������"#���#�#��#���"���� ���#"���"��#���.����0� ��#������#����*������"�"��#��
� �� "#;���8�����8�����"����� "#�#�����#� "#��������"#���#�#��+" �������������#���#���������#����������.�����.�����"��#��+" �F�"����#��-��#�"������#����#������#����<#�� ���.�#"�� �.����0� ��#� "#���"��#���#�. �#��#�������+#��#���.����0� ��#����#�����*�����������1���<��� �3�(:�?-�:�?�7-+�#����#���#�#�����"##"���"����#����#.����0� ��#��?-��"#��������:����#�����<#.����0� ��#��-+�"����#���"� ���"��� � ���#"���#����#�����*��#������"�"�������"#���#�#�#����"���� ���#"����+�#���.����0� ��#����#����*�����������
� �� "#;���D#����8�����8�����"�����"���#"��"�"�" ��#���� "#;���8�����8�����"���.�#�#���#��������#����.�����.�����"��
����������#�#�������"#���#�2�#����+"� ��"��#���-#��
8����05 ��#�#�. ��#������ �@ �#����.�����<�"�#"�����#�
���#� A��������#����#����� "#;���D#����8����
8�����"����#"���
1���� �3
=� "���� �����3
$ 5"����:���#"��
� �� "#;���8�����8�����"�
�� "#;���D#����8�����8�����"�
1������� �3
������"+������"����#���"�����"##����� "�*������+�#��
+� ��"�����#"��������#�������"#���#����#� �����"��3
� 5"����:���#"��� �� "#;���8�����8�����"�� �� "#;���D#����8�����8�����"�
Defining the Commitment Rules
5–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
?��0��+#�����"# (����#"���#��#���#��"�������#��������1 ��
2��������#��#�������"#�"����#����������#"�����
��+� ��3
� ?�������"#���#��#����#"����+���#� "#������#�����+�������������"#���#��#�#�����#"����+�#�����#� "#��������������"#���#���"��"���++��#���#" �"����#���"�� "�����
� ��+#�����"#���#��#������������#���������"#���#�������"�#"���������#�����+�����+#�����"#���#��#�#������#"����+�#�����#� "#������#���#�����������#�������"#���#�#�����������"#���#���"���#����"�*� "#��"�#�����@5 $4$�A�+��#�����*�����������������"#���#����"��"���++��#���#" �"����#���"� "�����
� ��+#�����"#���#��#����#"����+���#� "#������#�����+������+#�����"#���#��#����#"����+#�����#� "#�������+#�����"#���#����"��"��++��#���#" �"����#���"�� "�����
����������#�#�������"#���#�2�#����+"� ��"��#��
8����05 ��#����#��#�+���#������ ��������#���
�"#���?�������"#���#��#����#"����+���#� "#�����+#
����"#���#��#������������"#���#�������"�#"��
.����������������"#���#���#�.����+�����
-+��������#�#��"���#"+���.#"#�#��"#������������#���
������������#�������#�����������"#���#��#����#"��
�+���#� "#���#"���
����������������"#�����+#��?���������"�#"�������+#
�#����#"����+�5�#�:"#������ "���"#���"��#�����#� "#����
.�����;����"##����"��#���"�#"������ "��"���#��
"����#���
1���� �3
�����#������0�+#�����"#���#"���"��#�#������ �����
"���"#���"��#�����#� "#�����.����������"##����"��#�
�"�#"������ "��"���#���"����#����=� "���������3
$ ?�������"#���#
� ��+#�����"#���#����������"#���#�����
�"�#"���@5 $4$�A
��+#�����"#���#
1������� �3
������"+������#�������������"#�"����#����� "�*����
�+�#���+� ��"�����#"��������#���?��0��+#�����"#
����"��3
� ?����#����#"����+���#� "#� ��+#��?���������"�#"���@5 $4$�A� ��+#��#����#"����+���#� "#
Shop Floor Management
5–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining Commitments at a Work Center Location
�����������+"���#�������"#���#��#�����*����#�� ���#"��������#����#��+� ��"����� ���+��#�����*����3
� ������*����#��+��#�����*�������#"���"�#��#"��
� �����"��#������������ ���#"���+��#�����*����#�
� ��������#"����F���������.��+��#�����������#��+�#�������#�"#��
� ����.��*+ �����#"���+��#���.����0� ��#
��+"�"�������"#���#��#�����*����#�� ���#"������"#��+�#���+� ��"���#�*3�
� ��+"�"���#�����*����#��"��#���"#��D���#"���"�#��#"��
� ��+"�"���#��� ���#"����#�#�����*����#�
� ��+"�"���#���.�������������#�"#���+��#���." ��+���#�"� �@�"��#�2���+��#�"����� �A
� ��+"�"�������#����#�������"#�"����#�����"���.��*+ ��
Defining the Work Center in the Item’s Routing Instructions
7��#�����#��)��#"���-�+���#"���+���#����+"���#�����*����#��#�����+����������#"���"��#�����#"���"�#��#"���+�������"+"��"#���
Shop Floor Management
5–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����������������������������������! ����������� �������
1���#�����" ��5�2��"��#�������@> �$$A���������#�0�������)��#"���
$� �����*��"#��)��#"�������#"�������� �#��#���+� ��"���+"� ������� "�*1"��3�
� -#���B��.�
� 8����05 ��#
�� ������������������ "�*��� ��#��
Defining Commitments at a Work Center Location
5–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����#��)��#"���-�+���#"�������� �#��#���+� ��"���+"� ������� "�*��G3
� ��*����#�
Processing Options for Enter/Change Routing
Display
1. Enter a ’1’ next to the following fields to activate the field on the form.
Line/Cell ____________ Routing Type ____________ Batch Quantity ____________
Defaults
1. Enter the values to preload to the screen at initial inquiry.
Type of Routing ____________
Process
1. Select the screen mode (’0’ = Inquiry, ’1’ = Revise).
Mode – Processing ____________
Shop Floor Management
5–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Enter a ’1’ to update the component operation scrap percent in the Bill of Material for the components on the operation and the Cumulative Yield Percent on the Routing, when updating the operation yield percent.
Update ____________
Interop
1. Enter the transaction type for the interoperability transaction. If left blank, outbound interoperability processing will not be performed.
Transaction Type ____________
2. Enter the version of “Process Outbound Routings” (R3003Z1O). If left blank, ZJDE0001 will be used.
Outbound Processing Version ____________
3. Enter a ’1’ to write the before image for a change transaction. If left blank, no before images will be written.
Before Image Processing ____________
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
1. Bill of Material Revision ____________ (P3002) 2. Work With Assets (P1204) ____________ 3. Work With Item Master (P4101) ____________
Defining Commitments at a Work Center Location
5–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining the Location at the Work Center
7��#�����*����#��2�#��)��""���+���#����+"���#��� ���#"���+�������"+"����*����#��
���������������������������������������
1���#�����" ��5�2��"��#�������@> �$$A����������#�0���������*����#��
$� �����*��"#����*����#���� "�*�1"���#�� ���#��� ���*����#������#���E����.���<��� �����#����������������#�����"+"����*���#��
�� ������������������ "�*��� ��#�
Shop Floor Management
5–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*����#��2�#��)��""�������� �#��#���+� ��"���+"� ������� "�*�G3�
� :���#"���'�-��
� :���#"���8����
Processing Options for Enter/Change Work Center
Interop
1. Enter the transaction type for the interoperability transaction. If left blank, outbound interoperability processing will not be performed.
Type – Transaction ____________
2. Enter a ’1’ to write before images for Outbound change transactions. If left blank, only after images will be written.
Before Image Processing ____________
Versions
Manufacturing Constants (P3009) ____________ Business Units (P0006) ____________
Defining Commitments at a Work Center Location
5–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Defining the Branch and Parent Item for the Bill of Material
1���"��#��2���+��#�"����� ������#���." ��+���#�"� �+���#��"���#"+��#��." D�����#�"#��������������"���.����0� ��#�
����������������������������������������������������������
1���#�����" ��5�2��"��#�������@> �$$A����������#�0�������8" �
$� �����*��"#��8" ��+�2�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"��3�
� 8����
� -#���B��.�
�� ������������������ "�*��� ��#�
� �����#��8" ��+�2�#�"� �-�+���#"�������� �#��#���+� ��"���+"� ������ "�*��G3�
� ������FR
Shop Floor Management
5–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Enter/Change Bill
Defaults
1. Component Branch ____________
Blank = The system uses component branch when copy BOM. 1 = The system uses parent branch when copy BOM.
2. Bill of Material Type ____________
Blank = The system uses M for manufacturing bill of material.
3. As of Date ____________
Blank = The system uses all dates. 1 = The system uses the current date.
4. Display Sequence ____________
Blank = The system sequences by component line number. 1 = The system sequences by component line Number. 2 = The system sequences by operation sequence number.
Display
1. Bill Type ____________
Blank = The system does not display the Bill Type field. 1 = The system displays the Bill Type field.
2. Batch Quantity ____________
Blank = The system does not display the Batch Quantity field. 1 = The system displays the Batch Quantity field.
Versions
Enter the version for each program. If left blank, version ZJDE0001 will be used.
1. Single Level BOM Print ____________ (R30460) 2. Multi Level BOM Print (R30460) ____________ 3. ECO Workbench (P30225) ____________ 4. Component Maintenance (P3015) ____________ 5. ECO Header [P30BREV] ____________ 6. Bill of Material Where Used ____________ (P30201) 7. Item Master (P4101B) ____________
Defining Commitments at a Work Center Location
5–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8. Co/By- Products Inquiry ____________ (P30211) 9. Bill of Material Inquiry ____________ (P30200)
Edit
1. Item Branch Validation ____________
Blank = The system does not check to see if the item branch is valid. 1 = The system checks for a valid item branch record.
Interop
1. Transaction Type ____________
Blank = The system does not perform outbound interoperability processing. JDEBOM = The system performs outbound interoperability processing.
2. Write Image for a Change ____________ Transaction
Blank = The system stores the after image from F3002 to F3002Z1 1 = The system stores the before image from F3002 to F3002Z1
3. Interoperability Outbound ____________ (R00460)
Blank = Ths system uses the ZJDE0001 version of R00460.
Defining How the System Commits Inventory During Backflush
7��#���2���+��#�"������#��#�)��""���+���#�����"+��#�������#��#��������##����#���#������"#������ ����"����#�����"���#���.��*+ ���������
������������������ � ������ ������������������������ �
1���#��������1 ���2��������#���#��������@> $4$A��������2���+��#�"�����#��#�
$� �����*��"#��2���+��#�"������#��#������ �#��#���+� ��"���+"� ������ "�*�1"��3�
� �*"��#��8����05 ��#
�� ������������������ "�*��� ��#�
Shop Floor Management
5–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���2���+��#�"������#��#�)��""�������� �#��#���+� ��"���+"� ������ "�*��G3�
� 8��*+ �����#"��
%���� @A���������
8��*+ �����#"�� (������#��#���#��"�������#����#�����+��
����"#���#������ �����+�"����#����=� "���������3
$ ���#����#��������#� "#�.�������#����� ���"�
#�������"#���#����#� �+"� ��"��#�����.�����
2���+��#�"������#��#�#�. ��@1 ��%A�
� ���#������#� "#������"##"���#��#��� ���#"��
"��"��#���"��#�����*����#��2�#��#�. �
@1 ���&A����������#"�����F������+"� ��"��#��
8" ��+�2�#�"� �2�#��#�. ��@1 ���A���#��"��
#�����*����#��#��#�"�����
B�#�3�9�����#����#��#�����*�������#"���.�+���#��
��#� "#��-+�����������"���#�����*����������#"��
@) $4$�A��������#��#�#���5������.��5�#�:"#����
)��#"���-�#��#"�������"�����#"���#�� �#�������#��#��
��#� "#�������#"���"�#��#"����#�#�������#"���
-+�������+"����������"��� ���#"������#�����#"��
"�#��#"����#�"� ���#"������"���#��������"��� ���#"��
��+"����"��#�����*����#��2�#��#�. ��
5–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Managing Commitments for Grade and Potency
>���;�������#����;����#� ���"#�����#�.�� �#����#� ���������#����#�����#������"#���#�+������;�������#����;����#� ���"#����"#������#�������������#����������#��#�����#� "#���� ��#���� �#��"#�"��#����������� "�". ��+������"#���#�������#������#��#�������"#���#�"����#���F������
-��#���+� ��"����<��� ���#�����*�����F���#"#���F�"���"����������#������������"�(�$�;�(� 3
Exp. On Location Date Grade Hand CommitPrimary 50Secondary 9406220000 08/31 A01 50 50Secondary 9406230000 08/15 A02 300 300Secondary 9406240000 12/12 A03 400 400Secondary 9406250000 09/01 A04 5Secondary 9406260000 09/01 A05 5000
�����#�������"#�#���F���#"#"���"���#����"������"#��+��������-+�� ��+#�������"#���#������#�.����������"�#����"+"��� �#�"��#���������#����#������"#�#������"����#��#����"���� ���#"����#�#���������������#�����
2����"�������"#���#�+�������������#��������"#��+�#���+� ��"���#�*3
� �����#"�����"#��+�������+����#��#���"#
� 2����"�������"#���#�+�����#� ���"#��
See Also
� ���������� ����������"������
Shop Floor Management
5–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Converting Units of Measure for Potent Units
�����������+"�������"#��+�������������#��#���"#��+������������#����#�����#������"#���#��#����#��������#�#���F���#"#��#��#����"������"#��+�������1���<��� ��������#��#�#����"������"#��+�������"�>(�@�� ��A�#�����������#���"#��+�������"�>5�@��#��#��� ��A������#���#��������#����"�!�N��( �������#��#�#�����#� "#��F�"��6���>5��
-��#���+� ��"����<��� ����� ��#����F�"�� ��#��+�4!����#��#��� ��������" �. ��������������+��#������"�"��� ����#��#��� ���"�����"##���.��*�#�#����"���� ���#"���@ ��>50�!�M�4 �>(A�
On Potent Commit Location Potency Hand Units at standard &70%Primary 43Secondary 9406220000 80% 50 40 50Secondary 9406230000 90% 300 270 300Secondary 9406240000 40% 400 160 400
7"���#����<��� ���.�����"+�#����"������"#��+�������"�>5��#����#�����#�������"�#����"#��"#�"��#���:�#�2�#��#�. ��@14$��A�"��� ��+�������"���������5�#��#���"#��+����������������#��.��$��N���#��#�
( ����� �#�#��#����"#��+�$�����#��#���"#��"#������#������+�!6N������#��#�"#"�#����F�"�� ��#��+�$ � �������"�� ��� ���@$��0�!6A��������"��#��#�#��"����#��#���"#���#�*����#������"�� �"H���+�#���"����#���
/������B������#����"� ��������"��������������"#��������#���#������� ���+�����������#��������#���.����0� ��#�����������"#���#�����.�.����#���#��+�.� �����"+�#����"������"#��+�������+�����"#���"������#��#��������"#���#�"������#��#���"#��+��������<"#�+������ ����������*����������"��������*�"��.�#���"��#"�������#�"������"#���#�����.���#��+�.� �����.���"#���#�����#��#�����#��"������"#��+��������9����������#�#�"�.�����"��������#�+��#���� ������������*�������������������������#��#��������� ���������#���������#�#���� ��������+#��������#�#�����*�����
������#������"#���#�+����#��#���"#�������#��#����#�������#���"#��+�����������"���
Before You Begin
� ��#����#���5�#��#�7�"#�7���@��0�5A���������������� ��������� ���#�������%���������
Managing Commitments for Grade and Potency
5–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������� ������ �������������������
1���#���-����#�����#��������@>4$4$A���������#������7�"#��+�2�����
9����#��������"#��+������������"���+����#��#���"#���#��#�#����#���������#���+� ��"��3
� �����#���#��#���"#��+�������#�����"�� ���"#��+������
� �����#����"�� ���"#��+�������#����#��#���"#��+������
$� ���#�����*��"#���#������7�"#��+�2�����+����� "�*�(���
�� ����#������7�"#��+�2�����)��""�������� �#��#���+� ��"���+"� ������ "�*��G3�
� ���7�"#��+�2����
� �����"���1��#�
� 1���7�"#��+�2����
���������"���+����#��#���"#�"�� ����$���#��#���"#�M�$����"�� ���"#�1���<��� ���$�:5�M�$�:������$�>5�M�$�>(�
Shop Floor Management
5–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Managing Commitments for Controlled Items
7��#�����*�����5�#�:"#�+���#�����"+��#��� ���#"����������������#����+���������� "��. ����������#��������*�����
��������������� ������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ������������������#����������5�#�:"#�+���#���)��������
Managing Commitments for Grade and Potency
5–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*�����5�#�:"#������ �#��#���+� ��"���+"� ������� "�*��G3�
� :���#"��
� :�#�>�
� :�#�5�#����
(+#���������� �#��#����#�����#��������"#��+������������"���+��#����#��#���"#�
See Also
� '���� ��%�������(�������#����"���#�������"�����#"���+�2���+��#�"�����*����
Shop Floor Management
5–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reposting Commitments
1���#��������1 ���2��������#�(�������������@> $ $A��������)���#�����E���#"#"��
(+#�������#��������"#���#�����#���)���#������E���#"#"��.�#���������#����#���+� ��"��3�
� � ���@�#�#��H��A�� ��� ���+��#���F���#"#������F���#"#������"##���"��#��-#���:���#"���#�. ��@14$��$A�
� )���#�#���F���#"#���� ���"��#���-#���8�����#�. ��+��#�������#�"#��������#������#���"�+���#"���+���#�����*�����2�#��#�. ��@14��$A����#���+� ��"����� �� �#"��3
F���#"#��������;�@F���#"#������ �#���P�F���#"#��������A
� )���#�#���F���#"#������"##����� ���+����������#�"��#���-#���8����#�. ��+��#��� ���#"������"+"������#�����*�������#� "#�+��#���"#��������#������#���"�+���#"���+���#�����*�����5�#�:"#�#�. �@1 $$$A�����#���+� ��"����� �� �#"��3
F���#"#���F�"���;�F���#"#��"���
5���"�����#"���� �������#�����#��� ��#������*�����#��#����.� ������#�"��#�#��
�����#���������#����#�.� *�"#������� "���#��#������#���������"����#��"�#�+����
Before You Begin
� =�"+��#��#�#���-#���:���#"���#�. ��@14$��$A�"���#�"�����
� -��"��#�����#����������#�"����#����������+#�����"##����#�����.������������� � ���+�#��� �����,�����
Shop Floor Management
5–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Repost Open Quantities
Process
1. Enter the work order status for update. Any order with a status less than the status input will be reposted. If left blank, the status will default to ’99’.
Work Order Status Code ____________
Availability and Shortages
Shop Floor Management
5–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Availability and Shortages
��������#��#�/�.�������� �#���"��#�����#���#;�++��#"���������������+ ��2��������#�����"��#����#�"� ����� "������#�"� ����" �." "#����#������#�� "������" �." "#�����������#��*" ��9�������������" �." "#��������#���#��*"���������#����#��"������#�"����#�������������������#�"����#������������
9������ ������*�#������" �." "#���+�#�����#�#��#�����������#������ �#�����*������"#���.�+����������#��#�����*�������������#�����*�������.���������������"������+��� ����#��#�������+ ����9�����������*���" �." "#�����"�#�����*������+#��#�����*��������.�������#����9������� ������*����" �." "#�����"�#���." ��+���#�"� �+�����#������� �����.�+�����#"�������*�����+�����"#����9�������������#���"�#���#����+����"+"�����������#����"�#�� ���#����
��*"����"#�����" �." "#��������#�������"#��+�#���+� ��"�����#"��� �#�*3
� 2����"������" �." "#��"�+���#"��
� 2����"�����#����"�+���#"��
9���B�-+��������#��������������5�������#��#��������������#���#"�� ������#�������������+���.���#��#�������#"������#�����#"��"�#��#"���
Shop Floor Management
6–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#��#�����#"��������+����#"���#�����*������������##���"���#���������*������"�#���#"����"#������"����#��������#���#������������������#���"�����"�#�"��#��������#����#�������*�+����" �." "#��
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Completion toInventory
Super Backflushing
Integrate with Payroll(optional)
6–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Managing Availability Information
9������ ������*�#������" �." "#���+�#�����#��������#������ �#������*����.�+����������#��#�����*�������������#�����*��������.��������������"������+��� ����#��#�������+ ����9�������� ������*����" �." "#�����"�#��." ��+���#�"� �+�����#������� �3
� (+#��#�����*��������.�������#��
� 8�+������#"�������*�����+�����"#��
2����"������" �." "#��"�+���#"������"#��+�#���+� ��"���#�*3
� ��+"�"������" �." "#���� �� �#"���+����.����
� )��"��"�����#����" �." "#�
� )��"��"�����#� "#����" �." "#�
Defining Availability Calculations for a Branch
�����#������#���F���#"#"����+"����+�������.�����#���� �� �#�����" �." "#������+��������"��"��#��#���F���#"#"��#��#��������#�#����#���#��������.#��#�+���#�����;�����.� ����������#����#����� �� �#�����" �." "#���#����.������-+����� ���������+"� ��. ��*��#����#����<� ����#��#�F���#"#��+��#����� �� �#"����
Shop Floor Management
6–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������������������� ������������
1���#���-����#�����#��������@>4$4$A��������8����05 ��#����#��#�
$� �����*��"#��8����05 ��#����#��#������ �#��#���+� ��"���+"� ��"��#��E����.���<��� ���������� "�*�1"��3
� 8����05 ��#
�� ������#���.����������#����������(��" �." "#��+���#���)���������
Managing Availability Information
6–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���-#���(��" �." "#����+"�"#"����� "�*������+�#���+� ��"�����#"���#��.#��#�#��������"�#��F���#"#"�3
� E���#"#����+#�����"##���#�����,���
� E���#"#��?�������"##���#����
� E���#"#��1�#�������"##���#����
� E���#"#��?�������"##���#����
� �#���E���#"#��$���
� �#���E���#"#������
� E���#"#�����?� �
� ��+�#���#��*
4� ���������F���#"#���� "�*������+�#���+� ��"�����#"�������#����� "�*��G3
� E���#"#�����5����������)���"�#
� E���#"#�����5��'��#���$
� E���#"#�������*�����)���"�#
� E���#"#��"�����"#
� E���#"#��"��-����#"��
� E���#"#��"������#"���$
� E���#"#��"������#"����
Reviewing Part Availability
9������ ������*�#������" �." "#���+�#�����#��F�"���#����*������#�"��F���#"#��+�������#�"#���.�+����������#������*��������#������� ���7��#���5�#(��" �." "#��������@5 ����A�#������*�#������" �." "#���+�#�����#��
Shop Floor Management
6–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A��������5�#(��" �." "#��
$� ���5�#�(��" �." "#��'�2� #"�:��� �-����#�������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� 5���#�-#��
� 8����
�� )��"���#���+� ��"���+"� ������� "�*�� ��3
� ����-#���B��.�
� E���#"#��(��" �. �
%���� @A���������
)�F��#���E���#"#� �������.���+�����#�"#���#��#��������#�#�����������
�#����� �� �#�� ���� ��� ��� ���"��F���#"#�����#��
���.���+�����#�"#����F��#����1��"�#������"+�"#�#�*�
���������#����������#�"#����#�����"#�����F��#��
F���#"#���+�$���#����#������ ��� ���������#�+�� �
��������#�
E���#"#���0��"�* ���������#��+�#��������+#������ �������+���"�*���
���.����������������"�*����F���#"#��"��� �� �#��
�"���#�����"�*�1��#��@�)BGA�����#�����"�*�1��#�
2�#����@�)G1A��� ���+���8����05 ��#�2���+��#�"��
��#��
Managing Availability Information
6–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
E���#"#��(��" �. � �������" �. ��F���#"#������.����;�����.� ������"��
����"#���#������#"��������.��*�����(��" �." "#��"
�����+"������������.���#����#������#���.����0� ��#
���#��#�
Processing Options for Part Availability
Defaults
1. Processing Mode ____________
Blank = The system displays the bill of material in the simple inquiry mode. 1 = The system displays the bill of material in the simple inquiry mode. 2 = The system displays the bill of material in the parts availability mode. 3 = The system displays the bill of material in the leadtime inquiry mode.
2. Inquiry Mode ____________
Blank = The system displays the multilevel indented mode. 1 = The system displays the single level mode. 2 = The system displays the multilevel mode. 3 = The system displays the multilevel indented mode.
3. Bill of Material Type ____________
Blank = The system uses M for manufacturing bill of material.
4. Display Sequence ____________
Blank = The system sequences by component line number. 1 = The system sequences by component line number. 2 = The system sequences by operation sequence number.
Shop Floor Management
6–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Versions
1. Bill Of Material Print ____________ (R30460) 2. ECO Workbench (P30225) ____________ 3. ECO Header (P48020) ____________ 4. Bill of Material Revisions ____________ (P3002) 5. Item Master (P4101B) ____________ 6. Process Inquiry (P30240) ____________ 7. Work With Routing Master ____________ (P3003) 8. Item Availability (P41202) ____________ 9. Item Cross Reference (P4104) ____________ 10. Item Search (P41200) ____________
Select
1. Safety Stock ____________
Blank = The system does not subtract safety stock from the quantity on hand. 1 = The system subtracts safety stock from the quantity on hand.
2. Negative Quantities ____________
Blank = The system does not display negative amounts. 1 = The system displays negative amounts.
3. Leadtime Values ____________
Blank = The system displays the actual values from item branch table (F4102). 1 = The system displays the calculated leadtime values.
Process
1. Phantom Items ____________
Blank = The system excludes phantom items from the inquiry. 1 = The system includes phantom items in the inquiry.
2. Process Items ____________
Blank = The system excludes process items from the inquiry. 1 = The system includes process items in the inquiry.
Managing Availability Information
6–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Text Lines ____________
Blank = The system excludes text lines from the inquiry. 1 = The system includes text lines in the inquiry.
4. Consolidate Component Items ____________
Blank = The system shows individual occurrences of duplicate components in the inquiry. 1 = The system consolidates duplicate components in the inquiry.
5. Subassemblies ____________
Blank = The system excludes subassemblies from the inquiry. 1 = The system includes subassemblies in the inquiry.
6. Shrink ____________
Blank = The system excludes shrink from the calculation of requested quantity. 1 = The system includes shrink in the calculation of requested quantity.
7. Scrap ____________
Blank = The system excludes scrap from the calculation of extended quantity. 1 = The system includes scrap in the calculation of extended quantity.
8. Yield ____________
Blank = The system excludes yield from the calculation of extended quantity. 1 = The system includes yield in the calculation of extended quantity.
9. Purchased Items ____________
Blank = The system explodes to the next level of purchased items. 1 = The system does not explode to the next level of purchased items.
Shop Floor Management
6–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Parts List Availability
9������ ������*�#������" �." "#���+�#�����#����#�����#� "#��F�"���#����*�����#�"��F���#"#���+�������#�"#���.�+����������#������*��������#������ ���7��#�����*��"#����*�����5�#�:"#�+���#������*�#������" �." "#��+�����#� "#�
-+��������"+"������+#�����"#���#�+��#�����#��#���F���#"#"���"� �����"��"��#�#���"#��D����" �." "#���#�� � ���#"����-+��������"+"�������������"#���#�+��#����#���� ��F���#"#"��+���#������;����"##��� ���#"����������9�������� ��"� ���#���F���#"#"���+��������#�#��#���������������+#�����"#���#�#����*��������� ������
�������������� ��� ��������������
1���#�����" ������5����#"���'��"��#�������@> $$$A��������5�#�:"#-�F�"��
$� �����*��"#����*�����5�#�:"#������ �#��#���+� ��"���+"� ������ "�*�1"��3
� ���B��.�
�� ������#��������"�#��"#�������� "�*��� ��#�
Managing Availability Information
6–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���5�#�:"#���#�" �-�F�"�����"���#���+� ��"���+"� �3
� -#���B��.�
� E#�����?���
%���� @A���������
E#��)�F�"�� ����F���#"#�����" �. ������.��#�����;�����.� ������"��
����"#���#������#"��������.��*�����(��" �." "#��"
�����+"������������.���#����"��.����0� ��#����#��#�
���?�������"# �������.���+���"#���������"##���#����*�����"�
#����"������"#��+�������
���?�������"# �������.���+���"#�����"##���#�������"+"�� ���#"������
�#�
��0�����+#�����"# �������.���+���"#�#��#�����+#;����"##���#��� �
��������*�����"��#����"������"#��+�������
E#�������� �������.���+���"#����"+"������#���������������"�
�"������"#��+�������
Processing Options for Parts List Inquiry
Versions
If blank, version ’ZJDE0001’ will be used.
1. Purchase Order Inquiry Version ____________ 2. Supply/Demand Version ____________
Shop Floor Management
6–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Managing Shortage Information
���#�����������������������#��������������+�#����F�"�����#�"� �#����� �#��#���F���#"#���+�#�������#�"#����F��#����������*������������������*�#������" �." "#���+�"#������"�#���." ��+���#�"� �������*������#���#���"��"��#��"#���#��#������#�.���"� ��"���������#"������" �. ��F���#"#���
9���#��*���#����"�+���#"���+����#��"#��#���+� ��"��������#�"#"�3
� 5���������#�#��#������.#�"��+�����"�� ������
� 5���������#�#��#�����"++"�� #�#���.#�"�
� 5�#�#��#�������� ���� ���#"��
� 5�#��#����.������+���"���#���#��������#"��� "��
� 5�#�#��#�����<���"���#���������������+��#��
� 5�#�#��#���#�.��� �� �����"#���
2����"�����#����"�+���#"���"�� ����#���+� ��"���#�*3
� :���#"�����#���
� �����"�����#����"�+���#"��
� 5"�#"�����#���
Locating Shortages
9������� ���#����#����"�+���#"���+�����"#���#��#�"����"�#����"#�������������*�����.���"���#�����#������*.������7��#�����*.�����#���#��"���#��������#��+�����#������������#�����#�����" �.��+" ����9������ ���#��"#�����#����.���"���#���+� ��"����"#�"�3�
� 8����0� ��#�����"#������.�
� 8����0� ��#��"#������.����������.�����������#���
� �������.����������#���
� ����#���
Shop Floor Management
6–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��������� �������
1���#�����" ������5����#"���'��"��#�������@> $$$A�����������#�����*.�����
$� �����*��"#�����#������*.���������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� 8����
� ����B��.�
�� ������������������ "�*��� ��#�
� ������#����2�"�#�������)��""������"���#���+� ��"���+"� �3
� ���#�E���#"#�
Processing Options for Shortage Workbench
Versions
Enter the reporting feature version. If left blank, default version ZJDE0001 will be used.
1. For Order Inventory Issues : ____________ 2. For Open Work Orders: ____________ 3. For Open Purchase Orders: ____________
Defaults
1. Enter the default work order ____________ type. If left blank, ’WO’ will be used. ____________
Managing Shortage Information
6–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Changing Shortage Information
9����������������������#���#����"�+���#"���.��"#������*�����.����0� ��#��������*�����#��������������."��#"����+�#�����9�������� ���"���������"��"�+���#"���#��#�"��"��#������#����#���+" ���#�����
�����#���������� �+���#��#������������#�����������#����"�+���#"���9����������"�����#"���#�����"+����"�����"����+�#�����#���������#��#�#����#����������#�����+�� #�����#����#��#�#����#����"� ���
��������� ������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A�����������#���2�"�#�������
$� �����*��"#�����#������*.���������� �#��#���+� ��"���+"� ������ "�*�1"����
� 8����05 ��#
� ����B��.�
�� ������������������ "�*��� ��#�
� ������#����2�"�#�������)��""������"��#���+� ��"���"�+���#"���"+������3�
� ������#�
� ���#�E���#"#�
� �� "�������0�
� )� ��������
� )�F��#�����#�
%���� @A���������
)�F��#�����#� �����F��#�����#��+����5�������������#���#�����
�"��#���"�������+��������#���-+����� �����#�"�+"� �
. ��*��#����#������#����#�����#���9����������"��
#�"���#���#�����#"���
&���*� �� � � ������� ��������������� ��������������
������#��#��#�#�����������#�"���������-+����� �����#�"
+"� ��. ��*��#����#������#�����#��+���#�����*����
��#� "#�
Shop Floor Management
6–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Shortage Maintenance
Versions
Enter the reporting feature version. If left blank, default version ZJDE0001 will be used.
1. For Order Inventory Issues : ____________ 2. For Open Work Orders: ____________ 3. For Open Purchase Orders: ____________
Defaults
1. Enter the default work order ____________ type. If left blank, ’WO’ will be used. ____________
Printing Shortages
9��������"�#������#�#��#� "#�� ���#�������� ��#�����������#���#���+�������"+"����*�����������#����#"����#�����#����"�+���#"���+��#������#�+���#������#����2�"�#�������2�#��#�. ��@1 $$�A�
5"�#"�����#�������"#��+�#���+� ��"���#�*3
� 5"�#"�����������#���#���
� 5"�#"���� ���#���
Printing Component Shortages
1���#���5�"��"��1���#"���'��"��#�������@> $�$A����������������#���#����
������������#����#�������#� "#�#�����������#���#��F�"���#������ �#�����*���������"��"��#��#��"�����#����" �." "#���-#�"�� ����#���+� ��"��"�+���#"��3�
� E���#"#"�����" �. �
� E���#"#"��������
� E���#"#"���F�"��
� E���#"#"����#
7��#�������"�����#"���#�����"+�����#���#����#����"�#��� ����#��"#���#�����(���#��"#������#����"�"�� ������������#�������������� ������#�������+�#�����;�����F���#"#������#�����;����F���#"#����"���#����F�"��F���#"#���"�����#"����9�������� �������#��#�"����#�����#��+�#������������*�����������������5���"���
Managing Shortage Information
6–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9���B�-+����������������2��������#��#�����������#����#�������#������#�"�� ������#�#��#��������#�#���+�-����������
See Also
� "������ ��%�����������,�����+������
� ������� ���+� "� ������
� ,/01063#�� ������+��������"��#���,� ������ ���+�������#���� �
Processing Options for Component Shortages
1. Enter a ’1’ to print only parts with a shortage.
Print shortages only. ____________
Printing All Shortages
1���#���5�"��"��1���#"���'��"��#�������@> $�$A��������( ����#����
����( ����#�������#� "#���#������#�" �+��"#���"��#������#���2�"�#�������2�#��#�. ��@1 $$�A��9��������#�#�������"�����#"���#���"�#�"#���������#��� "����+���#�" �"�+���#"����.��#��������#�"#���
Processing Options for All Shortages
1.Enter a ’1’ to print one line of detail or a ’2’ for a second line of detail.
Enter your selection ____________
Shop Floor Management
6–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Issues, Kanbans, and MaterialMovement
Shop Floor Management
6–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Issues, Material Movement, and Kanbans
)���� ���+����#������������*��������#������� ��+�����"#���#��#������������������#�����#����F�"�����#�"� �#��#�������+ ���+������#"����9�����#�� �������#�#���F���#"#"��#��#����"����#��#�������+ ��+���"����#���#���������"���#����#"����( �����"#��"���#����#"�����������������"�� ��#����� ���*��.�������"���#��� ��"�#��������*�
-���������#�"� ��������#����"#��+�#���+� ��"���#�*3
� -�"�����#�"�
� ��*"����"#����#�"� ��������#
���������1 ���2��������#�����2���+��#�"���(�����#"����#������"��#����#"���#����#��"���#�����#�� �F���#"#"���+���#�"� �#��#��������"��#�������#"�������������"���#��#�����#� "#�+��#�����*��������#������ ���
����+� ��"���#�. ��"���#"+"��"�#���#"���+��#����"#���#��������������#��3
�������������������
�����������
����-����#���2��������#��#���� �������#��#��*
��#�"� �.�#�����"����#�����#����� ���#"�������#��
����+ ����9��������������"����#���"������
����"#���#������ �#�����������#��*�����F���#"#"�
#�������#�#��������#"��������
������� �����������
�����������
������������2��������#��#���� �������#�
�"�"��#���"�*"����F��#�#������2���+��#�"����#���
��"���+�#�����������#�����#���#�����#�����+�#��*"��
"����#����������#��"#�"������������
Shop Floor Management
7–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
When Do You Issue Inventory?
9��������#������#�������#�����"���#����#"����#�#�������#"���"����#���"���"�� ������������������1 ���2��������#��#���� �������#���������#���#���"�#�"��#��������#"���������������#�#�������#��"���#����#"����-��#����������������������������������#�����"����#��������#���+ ��##���"����+���#�"� �#��#�����*��������#������� ��
1���<��� ���+������#������#"������ ��������"��#����#�#��"�� #����� ������#�#���"����"����#����������"���#������� �#��������#�"�#��"����#��������������#�+� ����� �#"������"�#�#�����*��������#������� ���1� ����������#"������ ��������"��#������#�������#��"���#����#"����#��"�������#"����"#�"��#�����#"���"�#��#"���#���"�"�"H��#����"������"�.�#�������#�"� �#��#������#�� �����#�������+ ���������#�"� �#��#�#��"����#����#��� "#���.�"������#�������+ ���
How Do You Issue Inventory?
9������������������+�#���+� ��"�����#����#��"���"����#��3
�������� �� �����#��������#���#�"� �+���"����#�����������
��#��#���"���#����#"������#���-���+���
�������� ������� �����������
������ ���� �����#�����#���#"�� �������#���#�"� �+���"����#��
������������������*������"���#������
5���"���������
�������� ������� ����"������+ ���
"����� ���� �����#��������#���#�"� �+���"����#�����������
���#�"#������#�����*��������#������� ���
���� �#�����"����������������������#���#"�
���� �#"���#�������#�#��������#"��������������
�������#�+� ����� �#"����#�#��� �#�����#"����+�#��
��#"���"�#��#"���
����#�� ��� ��%��������5+����+��������+�
5�����"����� ���� �����#�����#���#"�� �������#���#�"� �+���"����#��
�#�����#"�����+"������������"�#�#�������#�#�����#"��
"�#��#"���������.��*+ ��"���� �������#�
"�� #����� ��.��*+ �����#�"� ����� �.����������#�
���#�"#��������� �#��
����"������ ��%���������+����+�� ����������+�
7–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����"�����#����� �������#��"�����#�"� ��"#���#����"���#���"� ���#��-���+�����#�����#�����"� ���#���"���#����#"���+��������"���.�+��#����#��������"#�
9���������+�����#"� �"���.���##"������#�����*��������#������� �����"�"�����.��*+ �����" ���1���<��� ���"+������#��+��#������*�"�$����������������" ��.��*+ ���"������������������+�������#"� �"����+�������+��+"����������#���+"+#������������#������� ��"����� �#���
����#����#"�����#��+��"���#����#"���"�#�������#��#�����#���9��������#�����"++���#���#���-+�����"���#���������+�����"#����#����#����"� �������"����������9��������"#�����/�#�#���"���F���#"#���������#�#���"���
5���"�����#"������#� ����#���#�������#"�����F������������#��)�F��#��+"� ��� �������#����#�����"���#���������#���#"�#�#���"#��� "#���+��"���
From Where Is Inventory Issued?
-����#���"�"����+���#��� ���#"����#���"���"#�"�����"##����9�������������#�������"#���#� ���#"���+�����"#����
-����#���-�������# ��� "����#��������"#���#��8�������+�����"#���#�#�#��� "��� ��� �����������"����������"����#���+������������� ���#"���#�������"#���#�"������( ��������������#"� ��"����������"����#���#����"++���#� ���#"����#����#���� "����#�������"#���#�+���#���� �� ���#"����������"#�#������"�"�����#�"� �#��#������� ���#"���
-+��������"�"���������;�����#����;���#� ���"#���+����� �#������#��� �#���������#������#"���"�D#��"#�"��#�����"���������#����#����"� �������"���������
Shop Floor Management
7–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"������#���#�. ��#��#�#����#�������#�����������"��"����#���
Shop Floor ManagementWork Order
Inventory Issues(P31114)
Inventory ManagementRelieve Inventory,update the Item
Location table(F41021)
Inventory ManagementWrite records in the Item
Ledger table
ManufacturingAccounting
General AccountingWrite G/L Transactionsin the Account Ledger
table
(F4111)
Actual variance update in theWork Order Variance table(F3104) and unaccounted
units update in the Work OrderParts List table (F3111)
(F0911)
7–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#��#�����#"��������+����#"���#�����*������������##���"���#���������*������#���"�#���#"�������"����#��������#���#������������������#���"�����"�#�"��#��������#����#���"��"����#���
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Completion toInventory
Super Backflushing
Integrate with Payroll(optional)
Shop Floor Management
7–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Kanbans
��" ��#����F�"����#�+����#�"� �����"����.����������#����������#����.�����#� ���.���"�� ������� ���*��.����G��.����������#��"���F���#"#"���+���������#��#����"+"��� ���#"������#��������#"��� "�������������"�����#���"�"�"H����*;"�;�����"����#�"���( #���������������#������#����*��.����"#�����#"#"�������+��#�"���������������#�������������#�"�����#�"� �
(�"�� ���������������#���� ��#��"�� �;"�� ����#���*��.����"���#�����������������������*��.���������#"���.��"#������" ��#����#�������������*��.������ ��.��"#����7��#���������#"��������#������*��.����#��������"��� ���#"��������#������ �������#�������*��.����#����� �"��� ���#"����.�����"+�"��������������."��#"����+�#���+� ��"����"#�"�3
� -#��
� :���#"��
� ���� "�
� G��.���"���#"+"��#"��
9��������*��.���"�������+�#�������3
� ���;5���
� ���;5���
One-Phase
���;����������#��#�#������� �#"�������#��+��#��#��������"��� ���#"�������+�����"������#����"����"����������� �#��#���F���#"#���"��# ��#��#�������"��� ���#"��������������#���*��.���#�#��#������*��;"��@$A�
����*;"��@$A
����*;��#�@�A
����*;"��@$A
����*;��#�@�A
7–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Two-Phase
���;����������#��#�#������� �#"�������#��+��#��#��������"��� ���#"��������#�������#� ���9������� �#��#���F���#"#��#��#������ �"��� ���#"�������������#���*��.���#�#��#������ �#���@ A��(+#��#���F���#"#�����.������"�� �����"�����#�#��������"��� ���#"������#��+��+���#������ �"�� ���#"���#��#��������"��� ���#"�������������#���*��.���#�#��"���������#�����*��;"��@$A�
-+���������*�"����*��.���F���#"#��+���#������ "���#����#�������"�"#"�#������"�#�#����#"���"+�#���*��.�����#��+ ���"����
����*;"��@$A
���� �#���@ A
����*;"��@$A
����*;��#�@�A
���� �#���@ A ����*;��#�@�A
9������������*��.���+��#���+� ��"���"#��3
� -����#�"���"#��
� 2���+��#����"#���@�.���. "��������#��A
� �<#��� ����� "���"#��
Inventoried Items Processing
�������������*���#���*��.���#��#�"�"����#�"����#���*��.���#�#��"���������������� �"��� ���#"����� ��"���#���*��.���F���#"#���9���#�������� �#���������*�"��#���*��.������"����� #�"����#����#"���+��"����#���#��+��
Manufactured Processing
�������������*���#���*��.���#��#�"�����+��#�����#����������"#������#�����*������� ��*�+������<"#"����#���-#�.���"#���#"������#���"#��D������ "���������@-+�#����#���������#�+"������#���"#����#������A������#����#�����#�����#���"#���#���#"�� ���##�����#�����#� "#�������#"���"�#��#"����������������*�"��#���*��.������������ �#��#�����*��������#���"����#����#����������F���#"#"�������#��+��#�������#�"#���#��#��������"�� ���#"���
Shop Floor Management
7–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������*���#���*��.������ "���.������*����#���������#"��� "�������#���"#���"�������#�������#����#"����#���#����"����#���#��+��������������������������*��������#��#������L�#���"#���"�"�� ��� ��"����.��#��������"��� "�������#���*��.���"����� �#�����������*���"����"��� #�"����#����#"���+��"����#���#��+���+���#������ �"��� ���#"���#�#��������"��� ���#"���
Externally Supplied Items Processing
(���<#��� ����� "���*��.����F�"���������������������+��#���"#�����"����������������.������<"#"������������#"��� ����������#���.��#������*���#�������-�����"#"�����������������*���#�#���*��.����#����#���"��#�� ��"�"#"�#������ ��#��"����#��"�#��������@��-A�#����#"����������������*�"��*��.���+�������<#��� ���� "���#����#�����#"��� ����+�������"�#����"�#�#��������������
See Also
� ���� ��� �������!���� ���������� ���"��#������������������������ ���+������"�+���#"����.��#����"+�"��� ���#"���+��������"#���#
� #�� ��� ��,�����+�������+��"�+���#"����.��#�����"������� �#"��+���#������� �
� ���������� ��!��"������ ���+��"�+���#"����.��#�"�"�����#�"� �#��#�" �#;���#� ��
� ���������� ����������"�������+��"�+���#"����.��#�"�"�����#�"� #��#�"�����;�����#����;���#� ��
� ���� ��)������+ ����+�������"��#�������������������'������� �����������+������ ���+������"�+���#"����.��#���-�#����#"��
7–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Issuing Material
9�������"�����#�"� ��"#���#�����"��������� �#"���#������*������9������� ���������������#�F���#"#"��#��#���������������#��������+��#�������
9���B�-+��������������#���"#���"��#���." ��+���#�"� ����*�����#��#�#������#"����F���������.��+��#���� "��������"F���+��#���." ��+���#�"� �
-�"�����#�"� ����"#��+�#���+� ��"���#�*3
� -�"�����#�"� �.����+ ��"��
� -�"�����#�"� ������ ��@��#"��� A
� )����"�����������#�����@��#"��� A
9���B�-+���������"�����������2��������#�����"�"�����#�"� �#������*�����#����#���������#�"���������#��"#����#�#���+�-�����������9�������#������#��#���#�#��#����#��+���������.���"�*����+"��#"���#��������"�*� "#�.�+���#����#���"���#�����#��(��"�*� "#�"����������#�#��#����"+"�#���������������� ����#�"����#���#���"�*���������*�������������#���"����#���"� ���#���������#��������#��#����"�*� "#����������������5���"���
See Also
� '���� ���������������� ���������� ���"��#������������������������ ���"+�����������#"#"�������+��#�"������������"�+���#"����.��#"�� #������"����������"�#������� ��"����#����
� ���������� ����������"�������+��"�+���#"����.��#�"�"�����#�"� #��#�"�����;�����#����;���#� ��
� %+��(� ���%+��7������������ ��8�"��#���"������#��� ��������������� ��������� ���� ��+��"�+���#"����.��#�#���"����#�����#������"�"�����#�"�
� #��� �� ��" ��������� ����"��#�����������%���+���������������� ���+��"�+���#"����.��#�����#�����+"�����"�*��F��#
Shop Floor Management
7–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Issuing Material by Preflushing
1���#�����" ������5����#"���;��"��#�������@> $$$A�����������5���"���
5�+ ��"���"�#�����#��+�����"���"���#����#"���+��� ���#�"� ��F�"���+�����*�������������������#�����*������"���#�������5���"��.�#����������2�#�"� �"�� ����#����#��#������#��F�"�����#" �#��� �#����#"���"��#�����#"���"�#��#"������"������ ����������*������#��"��#��+�#���������"#������"�����#�#���#�#���#���+�#�����*����������������#�������5���"����������
/������B���������������������#��#����������#����#�����+ ��"�����#����� ����������+��#�"������ ��#"���"���#��������#�������#��#���#�"� ������"�� ��������#��#�������+ ����"#�"��#�����������#��#�#���"��#����#"���"���������-+�������� ��#"���"� �����#��������������"�������������"������"����#��������.������#�����#�"� ������.���������#��+���"����#���������.�#���#����"�� ���������+���"����#���#��*�
9��������#�������"�����#"���"��#���(�#���#"����*�����-����#���-��������@5 $4��A�#��"����� ����+ ���"#����-+����� �����#�"�����"����#"���. ��*��#����#�����+ ����� �"#������"�#����"#��#�����*�����
Before You Begin
� ��#�#���"���#������������#�����#� "#�����������+ ���+�"����! ���������� �����+����#�" ��.��#��##"���#���"���#���������
See Also
� "������ ��%�����������,�����+�������+��#�������"�����#"���+�����5���"��
Issuing Material Manually
9����������#���-����#���-���������#������� ��"�����#�"� ����"�#���"#������*������9�������� �����#���-����#���-���������#���������#������"#���#�#��#�#����#�������������������������������"#���#��#���#����"� ���������������"+�#���F���#"#"�������#��������#��#���#�#� F���#"#���F�"����-#�� ����/�#�#������" �. ��.� �����+������ ���#"���"����"��������������#���F���#"#������"##����
-+������"����#��"����"� ����.��#�������+�#������. "�����������*�����#�������#������������"���#������"���"����#���"���
Issuing Material
7–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-�"�����#�"� ������ �����"#��+�#���+� ��"���#�*3
� -�"�����#�"� �+�����"�� �� ���#"��
� -�"�����#�"� �+����� #"� �� ���#"��
9���"�����#�"� �+����� #"� �� ���#"�����������������#��"�����#�"� �+�� ���#"���#��#�����"++���#�+������#�"� "#������#���-����#���-���+���
���� ����������������� �������������
1���#�����" ������5����#"���;��"��#�������@> $$$A��������-����#��-���
$� �����*��"#����*�����-����#���-�������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� �*"��#������B��.�
�� ���������"#�������� "�*��� ��#�
� ���-����#���-���)��""������"���#���+� ��"���+"� �3�
� 2#��#
� E���#"#�������
� 72
� :�#0��"�
� :���#"��
Shop Floor Management
7–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7��#���-���2�#�"� �1��+"� ��#��"�����#�"� �+��������#�F���#"#����"���"��"��#������������#��+���#����������������E���#"#�������+"� ��"��"��#��#���F���#"#���+��������������#�#��#�#����#��������#+���"����#���
4� ������� �#��#���"���������� "�*��G�
�����������"���#����#"�����������#���"#���F���#"#��#��#��������#�#������#��������#"������.��������#����������#��������#�"��#���E���#"#�������+"� ��+��#���"#���.��#��������#��+�#������� ��
���� �����#�"#���#��#�������� ������������������#���"#�������#���������J� ���:"��K�+���#���)��������������#���� �����#�#���"#�������������#���"�+���#"���"��#������"�#"���+"� ��#��J:"���-#���"�� ���K��
9����������"�#����������#��"#�������"+"���"� "H������. ����"��"����#���"����-+����������#�*����#������. �����.���������)�#"�����*�����:�#���"� �B��.��#���"������.�����"�� ���"�����#����*�������. "���
���� ������������������������������
1���#�����" ������5����#"���;��"��#�������@> $$$A��������-����#��-���
��"�#�*�"��� �����������������������#��"�����#�"� �+��� ���#"���#��#�"++��+������#�"� "#������#���-����#���-���+���
$� �����*��"#����*�����-����#���-�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ���������"#�������� "�*��� ��#�
� ���-����#���-���)��""�������� �#��#���+� ��"���+"� �3
� -��
4� ���������"#��������#����������2� #"; ���#"���+���#���)��������
Issuing Material
7–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6� ����� ��#�2� #"� ��:���#"������"���#�����+�� #�"�+���#"���"��#��+� ��"���+"� �3
� E���#"#�
� :���#"��
� :�#�0���"�
� 8����05 ��#
%���� @A���������
72 (������+"���������@��072A�#��#�"���#"+"��#�����"#��+
��������#�+����������#���F���#"#���1���<��� ���"#
���������#���.�� ��.�<����."����#��� "#�������������
���
Processing Options for Inventory Issues (P31113)
Edits Tab
7��#��������"�����#"���#�����"+��#���+� ��"�����"#�#��#�#����#����+��������"�"���"����#��3
� ������+�� #��������#�#�������#"���#���������#�#������
� ����#�#��.��������"���#����#��������#�"���"����#��
� ���#���#���"� ���������������"+�������#"�����;�����F���#"#������
� ���#���#������#��#���-#����� ��?"#���#�. ��@14$$6A
Shop Floor Management
7–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 1�����"��� �#��� �������#����#�������"���"����#��
� ���#���#��� ������ ������"��
1. Document Type
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#����#��#�#����#����#�������"�"���"����#�����������#�#����"��������+"���������@��0��A#��#�"���#"+"��#����"�"�������������+�#����������#����#��#����������#�#���#�������#�����+�� #��� �����������"#�+���#����� ��#�7����+"���������+���
2. Work Order Status Code
7��#�"�����"�����#"���#�����"+��#�����+�� #�#�#�������+��#���"�����#�"� ����#�����*��������������*�����#�#�������"��������+"��������@��0��A�#��#�"���#"+"��#���#�#���+�#�����*�����#��#�#����#��������������#�"� �"������.������+��������#��#���#�#�������#�������#����+�� #��� �����������"#�+���#����� ��#�7����+"���������+����-+����� ����#�"�+"� ��. ��*��#����#���������#�����#��#�����*�����������#�#�������
3. Material Status Code (Manufacturing Only)
7��#�"�����"�����#"���#�����"+��#�����+�� #���#�"� �#�#�������#��#�#���#���������#�����*������������2�#�"� �#�#�������"��������+"��������@ $02�A�#��#�"���#"+"��#���#�#���+�#�����#�"� �#����������#����#��"�����#�"� ����#��#���#�#�������#�������#�����+�� #��� �����������"#+���#����� ��#�7����+"���������+����-+����� �����#�"�+"� ��. ��*��#���#���������#���#������#�"� �#�#�������
4. Work Order Status Code Limit (Manufacturing Only)
7��#�"�����"�����#"���#�����"+��#�����+�� #���*�����#�#�������#��#�#���#���������#�����*��������������*�����#�#������� "�"#�"�������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#�����*�����.��������"��#����#��������#�"�����#�"� ����#��#���#�#�������#�������#�����+�� #�� �����������"#�+���#����� ��#�7����+"���������+���
5. Negative Quantity on Hand
7��#�"�����"�����#"���#�����"+�����#���#����#����"� �������������������#�����#�"� �"�����#�#�����;�����F���#"#��#��������#"�������#��=� "���� �����3
$ �����#����"� ���������������+������#"�����;�����F���#"#"��8 ��* �����#���������#��"� ���������������+������#"�����;����
F���#"#"��
Issuing Material
7–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Item Sales History
7��#�"�����"�����#"���#�����"+�����#���#����#�������#��#���-#����� �?"#���#�. ��@14$$6A����������"�����#�"� ��=� "���� �����3
$ �����#�������#��#����� ��-#���?"#���#�. ��8 ��* �����#���������#�����#��#����� ��-#���?"#���#�. ��
7. Lot Hold Codes (Manufacturing Only)
7��#�"�����"�����#"���#�����"+�������+�+"��� �#��� �������#����"���#���#���"���"����#������#������ ������������#�"*���� �����#�"�+"� ��. ��*�-+�������#������#�"*�"��#�"�+"� ���#����#���"���"����#���#��� ��� �� �#��-+���� �����#�"�+"� ��. ��*��#����#���������#�"���"����#���#���� �� �#�
8. Unplanned Issues
7��#�"�����"�����#"���#�����"+�����#���#����#������������ �����"����=� "���� �����3
$ �����#������������ ������"���8 ��* �����#���������#��������� ������"���
9. Purchase Order Document Type
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#�����+�#����������������"�#����"#��#���"�� #������"����������"�#��+���#�"� ��5����������������#�#����"��������+"���������@��0��A�#��#�"���#"+"��#����������##����#��#�#����#���������������"���+������������������������#��#���������#�#����#���������+�� #��� �����������"#�+���#����� ��#�7����+"�������+����-+����� �����#�"�+"� ��. ��*��#����#�������5���#����������##����
10. Receipt Routing Route Type (Future)
7��#�"�����"�����#"���#�����"+��#�����+�� #���#��#�������"�#���#��#��"�� #������"����������"�#��+���#�"� �"�#��"����#����)���"�#���#"�����#�#����"��������+"���������@4 0)9A�#��#�"���#"+"��#�����#��#����#��#�#����#�������������"�"������"#���"�#��"����#����"#�������"�#���#"������#������#�#����#�������#�����+�� #��� �����������"#�+���#����� ��#�7����+"��������+���
11. Route Type (Future)
7��#�"�����"�����#"���#�����"+��#�����+�� #���#��#�������"�#���#��#��"�� #������"����������"�#��+���#�"� �"�#��"����#����)��#��#����"�������+"���������@4 0)�A�#��#�"���#"+"��#�����#��#����#��#�#����#����������
Shop Floor Management
7–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���"�"������"#���"�#��"����#����"#���#������"�#���#"������#������#��#����#������#�����+�� #��� �����������"#�+���#����� ��#�7����+"���������+���
Display Tab
7��#��������"�����#"���#�����"+�����#���#����#����"� ����� ��#����������#��"#���� "��"���#�����������"� ����� �����"+"�������#"����"�. ��#��� �#����.��+"� ���������#��#���F���#"#��"����
1. Issue Type Code
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ���� ��������#����� ����������#��"#������ "��"���#����������=� "���� �����3
$ �����#����"� ����� ����������#��"#���� "��"���#���������8 ��* �����#����"� �����������#��+�� �"���#���������
2. Operation Sequence (Manufacturing Only)
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ����� ������#"���F������#��#��F�� �#������"+"�������#"����F�������=� "���� �����3
8 ��* �����#���.��"��#����"� ����"#��#������"+"�������#"����F������$ �����#����"� ����� ������#"����F������#��#��F�� �#������"+"��
�F������
3. Requested Date (Manufacturing Only)
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ����� ������#"���F������#��#��F�� �#������"+"����F��#�����#���=� "���� �����3
8 ��* �����#���.��"��#����"� ����"#��#�������#"����F�������"#��#���F�"�� ��#��F��#�����#��
$ �����#����"� ����� ������#"����F������#��#��F�� �#������"+"���F��#�����#��
4. Lot Number
7��#�"�����"�����#"���#�����"+�����#���#����#�����#��#�#���:�#B��.��+"� ��+�����#���=� "���� �����3
$ �����#���������#�� �������#����#������ ���"��#���:�#�B��.��+"� ��8 ��* �����#���� �������#����#������ ���"��#���:�#�B��.��+"� ��
5. Issue Material For
7��#�"�����"�����#"���#�����"+�����#���#����#�����#��#�������������"����F���#"#��+��� ���������#��"#������ "��"���#���������
Issuing Material
7–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#������#����� ���+���#���-���2�#�"� �1��+"� �����#�����*��"#���*�����-����#���-���+���������#���"����� ��"#����"#�����"��F���#"#���=� "���� �����3
$ �����#�����#���#"�� ����#��#���F���#"#��8 ��* �����#���������#���#��#���F���#"#��
6. Apply Shrink
(������#��#����#� ����#���#����#������ "��������#�"#��D��"�*�+��#��#�#��������������"���F���#"#���+�����������#�"#����=� "���� �����3
$ �����#������ "��#����"�*�+��#��#��#���"���F���#"#��8 ��* �����#���������#���� ��#����"�*�+��#��#��#���"���F���#"#��
7. Apply Yield
(������#��#����"+"�����#���#����#������ "������#"������������#����#�#��������������"���F���#"#���+�����������#�"#����=� "���� �����3
$ �����#������ "��#�������#"������������#�#��#���"���F���#"#��8 ��* �����#���������#���� ��#�������#"������������#�#��#���"��
F���#"#��
Versions Tab
7��#��������"�����#"���#�����"+��#�����"����+�#���+� ��"��������#��#�#����#�����������"�"���"����#��3
� ���#����2�"�#�������@5 $$�A
� �����5����������@54 $�A
� 5����������)���"�#�@54 $�A
� )���"�#�)��#"���2������#������"��"#"���@54 �6�A
=�"������#� �����#����������"� ���"�+���#"��������+���������"��#�����#���#�#�������"�����#"���#�����"+"����"���#�����#����������
1. Shortage Maintenance (P3118)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#������#����2�"�#�������������@5 $$�A�+���#��-����#���-���)��""���+����-+����� �����#�"�+"� ��. ��*��#����#������#��Q������$���"����+�#������#����2�"�#�������������
=�"������#� �����#������#����2�"�#��������������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
Shop Floor Management
7–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Open Purchase Orders (P3160W)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���5����������-�F�"��������@54 $�A�+���#��-����#���-���)��""���+����-+����� �����#�"�+"� ��. ��*��#����#������#��Q������$���"����+�#���5����������-�F�"��������
=�"������#� �����#���5����������-�F�"���������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
3. Purchase Order Receipts (P4312)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���5����������)���"�#�������@54 $�A�+���#��-����#���-���)��""���+����-+����� �����#�"�+"� ��. ��*��#�����������#���Q����������"����+�#���5����������)���"�#�������
=�"������#� �����#���5����������)���"�#��������"� ���"�+���#"�������+���������"��#������#���#�#�������"�����#"���#�������"+"����"���#����#����������
4. Movement and Disposition (P43250)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#���)���"�#�)��#"���2������#������"��"#"��������@54 �6�A�+���#���-����#���-���)��""���+����-+����� �����#�"�+"� ��. ��*�#������������#���Q����������"����+�#���)���"�#�)��#"���2������#�����"��"#"���������
=�"������#� �����#���)���"�#�)��#"���2������#������"��"#"���������"� ���"�+���#"��������+���������"��#������#���#�#�������"�����#"���#������"+"����"���#�����#����������
Equipment Management Tab
7��#��������"�����#"���#�����"+������#����#���"���"����#��������"����F�"����#05 ��#�2��������#���*������� ��
1. Equipment/Plant Management
7��#�"�����"�����#"���#�����"+�����#���#����#������������"�#���������*������=� "���� �����3
8 ��* �����#�����������#�"� �+��������+��#�"�����*�����$ �����#�����������#�"� �+������"�#���������*�����
-+��������#�"�����"�����#"�������"+�����#���#����#�����#��#�����*�������.��"��#����. �����+"� ���+�#���/���� ���#��"��#�����*����
Issuing Material
7–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
B��.������"�����#"���������#������#��#���/���� ���#�������"#������#�����*�����B��.������"�����#"���
2. Work Order Number
7��#�"�����"�����#"���"+�����������#���������"�#���������*�����"�#���)����F�"����#05 ��#�2��������#�����"�����#"����( ������#�"����"�����#"���#�����"+�����#���#����#�����#��#�����*��������.�"��#����. �����+"� ���+�#���/���� ���#�������#����#���������#����"�#���������*������=� "���� �����3
$ �����#�����#���#"�� ����#��#�����*��������.��"��#����. ����+"� ��
8 ��* �����#���������#���#��#�����*��������.��"��#����. �����+"� ��
Interoperability Tab
7��#�"�����"�����#"���#�����"+��#�����+�� #�#����#"���#����#��#�#����#�����+������"����<��#�#����#"���
1. Transaction Type
7��#�"�����"�����#"���#�����"+��#���#����#"���#����#��#�#����#�����+���<��#�����"���������#"���#����"��������+"���������@��0��A�#��#"���#"+"��#���#�����+�#����#"���+��#�����*��������#��#���#����#"���#����#������#�����+�� #��� �����������"#�+���#����� ��#�7����+"��������+����-+���� �����#�"�+"� ��. ��*��#����#���������#�����<��#�����"���
Recording Component Scrap
9����������#�����������#������������#��������������F���#"#"���+��������#�"#���"��#���-#���:�����#�. ��@14$$$A�����#�����*�����5�#�:"##�. ��@1 $$$A������-#���:��������"���������"#�#�" ��+�#���F���#"#������������#��������+��#�������#����#"����
������������#�����������#���������������#��#���+� ��"���"���#��#"�+���#"��3
� 9��������#�������������#��� ��#���������.����"����#������*����
� ����#�#� �F���#"#��#��#�"��������+������������#������#��<�����#��#�#� �F���#"#��#��#�"�"����#��#�����*�����
� B���#"���#����#"������� ������� ��#���#����#"���F���#"#����� ������������#"���"���
� 9���������#������#����#"���"��������"#��+������������������F���#"#��"������#���#��#�����"#��+��������+�#�����#� "#�����������
Shop Floor Management
7–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
#��������� ����"#��+������������#����#�������#��#�����*����5�#�:"#�#�. ��@1 $$$A�
�����#������#����������.��"�+���#"���+���#�����*�����2�#�#�. ��@14��$A�����#�����������#�"�+���#"���+���#�����*�����5�#�:"##�. ��@1 $$$A��
����������������� ���
1���#�����" ������5����#"���;��"��#�������@> $$$A����������������#�����
$� �����*��"#����������#����������� �#��#���+� ��"���+"� ������� "�*1"��3�
� -#���B��.�
�� ������#��������"�#����������� "�*��� ��#�
Issuing Material
7–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����������#������)��""�������� �#��#���+� ��"�����#"��� �+"� ������ "�*��G3�
� �������
� )���������
� �<� ���#"��
� ��#�
%���� @A���������
)��������� (������+"���������@ $0)�A�#��#�"��"��#��#��������+�
#���F���#"#��#��#������������#�#�"�����#"���
�<� ���#"�� ��<#�#��#�"���#"+"��#��������#��#���#����#"����������
See Also
� %+��(� ���%+��7��,�����#�� ��������� 8�"��#���"������#��� ��������������� ��������� ���� ��
Shop Floor Management
7–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Component Scrap
Process
1. Enter a ’1’ for Item Number entry. Blanks will default to Work Order Number entry.
Processing Mode ____________ 2. Enter the Status Code beyond ____________ which Component Scrap cannot be made. Blank means no restriction for Component Scrap.
Defaults
2. Item Ledger Transaction Date. (Blanks will default to the current date).
Transaction Date ____________
3. Default Reason Code.
Reason Code ____________
4. Enter the document type associated with the Component Scrap Transaction.
Document Type ____________
SN Processing
1. Enter the Document Type used for Serial Number Issues. If left blank ’IM’ will default.
Document Type ____________
7–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Material Movement
1��)���#"#"���2���+��#�"������" ��#����F�"����#�+����#�"� �����"����.���������#����������#�"����#� ���.���"�� ������� ���*��.����G��.���������#��"����F���#"#"���+���������#��#����"+"��� ���#"������#��������#"�� "��������������"�����#���"�"�"H����*;"�;�����"����#�"�������������#"����������#���� ��#��"�� ��"�� ����#���*��.��3�G��.���������#"������G��.������� ��
9��������������#"������. "���"���#�����*"����"#��G��.���2�#�+����G��.���#��#�����������#"������. ��������������#�����+�4�@��#"�����. �A���������������*���#���*��.����"#�������#"������. ���#����#�����#���������������+��#�������"#���������� ������+��#�����������#��������������*�"��#���*��.����#����#������+"��#����"����#�����������"�#���������� �#��#���"����#���#��+��
5���"���*��.������"#��+�#���+� ��"���#�*3
� 5���"���*��.���������#"���.��"#��
� 5���"���*��.������ ��.��"#��
Processing Kanban Consumption by Item
G��.���������#"���� �������#�������� �*��.����#������"+"��������"�� ���#"����(+#������ ���#��"#����������"������#���#�#���+������"#�������������*�������+�#���+� ��"���#�#����������#��������"��� ���#"��3
� ����*��;"��@$A
� ����*��;��#�@�A
Shop Floor Management
7–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������� ���������� �������������
1���#���)�#��8���������� "��������@> $$6A��������G��.���������#"���
$� �����*��"#��G��.���2�#������� �#��#���+� ��"���+"� ������� "�*1"��3
� �����"���8����
� -#���B��.�
� �����"���:���#"��
�� �������*�"����*��.���#��#������� "���.��#��������#"��� "���@����+���"������#������*�����������#��A������ �#��#���+� ��"���+"� ������ "�*��G3
� ��"+#
� ��� �����B��.�
�����#����"� ��������+"��#"���+���#��#����"#�����#�����+"�������� �����*��.���#����#"���
� ������#��������"�#��G��.���-���������#��������������*�-��+��#���)��������
4� �������*���#���*��.����������#��������"�#��G��.���-���������#�������������*���#�+���#���)��������
Working with Material Movement
7–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Kanban Consumption
Mode
1. Enter a ’1’ to set mode to ____________ Kanban Supply. If left blank, Kanban Consumption mode is assumed. 2. Enter a ’1’ to prompt the ____________ confirmation of a transaction. 3. Enter Kanban Status to display, ____________ if left blank all statuses are displayed.
Defaults
1. Item Number(Optional). ____________ 2. Location(Optional). ____________ 3. Enter number of hours ____________ equivalent to one day. Default is 8. 4. Enter the Closed Status for a ____________ rate schedule or work order. (Default is ’99’). 5. Bill of Material Type. If left ____________ blank, ’M’ is used. 6. Employee Number (Optional). ____________
Process
1. Enter a ’1’ to automatically ____________ call Work Order Processing (R31410) when a work order is created. 2. Enter a ’1’ to perform a blind ____________ execution of Hours & Quantities. 3. Enter a ’1’ to perform a blind ____________ execution of Material Issues. 4. Enter a ’1’ to perform a blind ____________ execution of Work Order Completions. 5. Enter a ’1’ to perform a blind ____________ execution of Shipment Confirmation. 6. Enter a ’1’ to perform a blind ____________ execution of Inventory Transfers.
Purchasing
1. Enter a ’1’ to create a ____________ Purchase Order 2. Enter a ’1’ to trigger an EDI ____________ 862 Transaction
Versions
Enter the version for the following programs. If left blank ZJDE0001 is used unless specified otherwise.
1. Rate Header Maintenance ____________ (P3109) 2. Part Availability (P30205) ____________ 3. Work Order Entry (P48013)) ____________
Shop Floor Management
7–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4. Work Order Processing ____________ (R31410) 5. Open Orders Inquiry (P3160W) ____________ 6. Purchase Orders Entry (P4310) ____________ 7. Purchase Order Print (R43500). ____________ Used to generate an EDI 862 transaction. If left blank, XJDE0011 is used. 8. Purchase Order Receipts ____________ (P4312). To be called in blind mode. If left blank, ZJDE0008 is used. 9. Super Backflush (P31123) ____________ 10. Hours & Quantities (P311221) ____________ 11. Material Issues (P31113) ____________ 12. Work Order Completions ____________ (P31114) 13. Inventory Transfers (P4113) ____________ 14. Sales Order Entry (P4210) ____________ 15. Shipment Confirmation(P4205) ____________
Processing Kanban Supply by Item
G��.������� ��� �������#�������� �*��.���#��#�������� ��"����#�+�"#���#���������������#������"+"������ �"��� ���#"����(+#������ ���#�"#����������"������#���#�#���+������"#��������������*�������+�#���+� ��"��#�#����������#������ �"��� ���#"��3
� ����*��;"��@$A
� ���� �#���@ A
-����#�������#�#�������++��#�����+� ��3
� ���;�����'�"����#���"�"����"�#� �����"�����������" �. ���#�#�������"��� ���#"��������#���#�#��"���������#������*��;"��@$A�
� ���;�����'�#������� �#"�������#��+��������#�������#� ���+� ��3
� ����F���#"#��"����� �#���#��#������ �"��� ���#"�������#���*��.��#�#��"���������#������ �#��@ A�
� (+#��#���F���#"#�����.�������"�� �����"�����#�#��������"�� ���#"������#��+��"���+�����+���#������ �� ���#"���#��#�������"��� ���#"�������#���*��.���#�#��"���������#������*��;"�@$A�
Working with Material Movement
7–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������� �������� ������������
1���#���)�#��8���������� "��������@> $$6A��������G��.������� ��
$� �����*��"#��G��.���2�#������� �#��#���+� ��"���+"� ������� "�*1"��3
� ���� �"���8����
� -#���B��.�
� ���� �"���:���#"��
�� ���� �#��#���+� ��"���+"� ��#������*�"����*��.���#��#������� "���.�#��������#"��� "���@����+����"������#������� ������*����������#��A������ "�*��G3
� ��"+#
� ��� �����B��.�
� ������#��������"�#��G��.��������������������*�-��+���#���)�������
4� � "�*��*�
Processing Options for Kanban Supply
Mode
1. Enter a ’1’ to set mode to ____________ Kanban Supply. If left blank, Kanban Consumption mode is assumed. 2. Enter a ’1’ to prompt the ____________ confirmation of a transaction. 3. Enter Kanban Status to display, ____________ if left blank all statuses are displayed.
Defaults
1. Item Number(Optional). ____________ 2. Location(Optional). ____________ 3. Enter number of hours ____________ equivalent to one day. Default is 8. 4. Enter the Closed Status for a ____________ rate schedule or work order. (Default is ’99’). 5. Bill of Material Type. If left ____________ blank, ’M’ is used. 6. Employee Number (Optional). ____________
Shop Floor Management
7–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process
1. Enter a ’1’ to automatically ____________ call Work Order Processing (R31410) when a work order is created. 2. Enter a ’1’ to perform a blind ____________ execution of Hours & Quantities. 3. Enter a ’1’ to perform a blind ____________ execution of Material Issues. 4. Enter a ’1’ to perform a blind ____________ execution of Work Order Completions. 5. Enter a ’1’ to perform a blind ____________ execution of Shipment Confirmation. 6. Enter a ’1’ to perform a blind ____________ execution of Inventory Transfers.
Purchasing
1. Enter a ’1’ to create a ____________ Purchase Order 2. Enter a ’1’ to trigger an EDI ____________ 862 Transaction
Versions
Enter the version for the following programs. If left blank ZJDE0001 is used unless specified otherwise.
1. Rate Header Maintenance ____________ (P3109) 2. Part Availability (P30205) ____________ 3. Work Order Entry (P48013)) ____________ 4. Work Order Processing ____________ (R31410) 5. Open Orders Inquiry (P3160W) ____________ 6. Purchase Orders Entry (P4310) ____________ 7. Purchase Order Print (R43500). ____________ Used to generate an EDI 862 transaction. If left blank, XJDE0011 is used. 8. Purchase Order Receipts ____________ (P4312). To be called in blind mode. If left blank, ZJDE0008 is used. 9. Super Backflush (P31123) ____________ 10. Hours & Quantities (P311221) ____________ 11. Material Issues (P31113) ____________ 12. Work Order Completions ____________ (P31114) 13. Inventory Transfers (P4113) ____________ 14. Sales Order Entry (P4210) ____________ 15. Shipment Confirmation(P4205) ____________
Work Orders and Rate Schedules
Shop Floor Management
7–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Work Order Scheduling and Rate Schedules
(���#��+���������� "�����#"�"#"��������������"#����*�������������������*������ �������������#��#���#�#���+���������#�������#���� "�"#���+�������#�"� �� ���"�������� ��������������*��"#������� �����������"� �������+��#�"�����*�����.��"#����� ��������#���������#���*�����#�#���#����������"�"#����������."��#"����+�#�����9�������� ���"� ����*�����.��#�#���#�����F��#�����#���9��������#�#������+�� #�+��#��+���"��#�������"�����#"����
5���"�����#"���� ����#��"���#�����+�� #��� ���+����"���+"� ��������#� ���"�����"����+����"�#������������������������������#����9�������� �������� �#���"�+���#"�������������"�#�����*������� ��������������������#� "#��������#"���"�#��#"���
(+#������*�����"����#�������+ ����������#���"���#���������������*�����"#���#��������*����#��#��������"���#�������"������ ����9����"��#�����#���������������� ��#�������#����� "�"#���+�#���2�#�"� �)�F�"����#5 ���"�������2�#��5����#"��������� "�������� ���
������ "�����*����������#������� �����"#��+�#���+� ��"���#�*3
� ��*"����"#����*���������� "��
� ��*"����"#�����#"#"�������� �
9���B�-+��������#��������"#��)�F�"����#�5 ���"����#����"#�����#�����#"��"�#��#"���+����*����������#������� ���������"#��#��� �������#����*����#��"��� �������"�� �������#���������#��� �������������*���#��#����<"�"H�������#"����������#������ ����������
Shop Floor Management
8–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#��#�����#"������+ ���+���#������#"����+���*�������#��������#������ �#"�������������"��#�������"��"��"��#��#�����"�#"��#���������������������� ����*����������#�
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Post Completionto Inventory
Complete SuperBackflushing
Integrate with Payroll(optional)
8–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Work Order Scheduling
9�����"�����*�����#������*������"#���#��������*����#��#��������"��#��#�#�������"������ ����9���#�����"�#������ "���"�+���#"����������#�������#"���"������*����#��
��*"����"#����*���������� "������"#��+�#���+� ��"���#�*3
� )��"��"�����*�����"�+���#"��
� 5"�#"�������� "���"�+���#"���+����*����#�
Reviewing Work Order Information
(+#������*�����"����#�������+ ����������#���"���#���������������*�����"#���#��������*����#��#��������"���#�������"������ ��������������"�������*���������������������#���#�#���#������"�"#���#"����+��H��������"���#"��������#�����+�+ ����������
Shop Floor Management
8–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������������������
1���#�����" ������5����#"���;��"��#�������@> $$$A�������������1 ����*.�����
$� �����*��"#������������ "�������� �#��#���+� ��"���+"� ������� "�*1"��3
� 8����05 ��#
�� ����������*��������.������� "�*��� ��#�
Working with Work Order Scheduling
8–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*������#�#��7���#������� �#��#���+� ��"�����#"��� �+"� ������ "�*��G3
� �#�#�
� ����
� 5"�"#�
� 1 ���2�
� 1��H��90B
� ��F�����
%���� @A���������
�#�#��7���#� (������+"���������@��0��A�#��#�"��"��#��#���#�#������
#��#��������#�#����#���#���������.��"��"�����"�#�+�
� ��#"�����*�����"�+���#"���
9���������#��#���#�#�������"�+���#"���"�������+�#��
+� ��"������3
� ��#����������+�#�#���.����#�"��������"��.�#�#���1�����������+"� ��
� ��#���� ����1��������#���"�����*����.��"��"����"#������#"�� ��#�#���1���<��� ��1����#�#��$���"� ���� ���*������"#���#�#���+�$��������
� ��#���� �������������#���"�����*�������"����"#������#"�� ��#�#���1���<��� ������4���"� ���� ���*������"#����#�#���+�4��� ��
1 ���2� (������+"���������@��0�2A�#��#�"��"��#�����������"�
#���#�#���+�����*�����������#���"��"��#�����������
��*������"#������#�"*�"��#��������"�#�����#��
"�F�"��+���+"� ��������#����"�� "��#�#���+ ��������
"��#������"�#"���+"� ���+�#�����*�����
Processing Options for Shop Floor Workbench
Status/Item
1. Select Status Range or Item
From WO Status ____________ Thru WO Status ____________ Item Number ____________ Item Cross Reference ____________
Addresses
1. Select Planner and/or Customer
Address Number-Planner ____________ Address Number-Customer ____________
Shop Floor Management
8–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Categories
1. Select WO Categories
WO Type ____________ WO Priority ____________ Phase (Category 1) ____________ Category 2 ____________ Category 3 ____________
Document
1. Select WO Document Type
WO Document Type ____________
Versions
1. Note: Versions will default to ZJDE0001
Sales Order Inquiry Version ____________ Purchase Order Inquiry Version ____________ Work Order Completions Version ____________ Super Backflush Version ____________ Inventory Issues Version ____________ Work Order Entry Version ____________ Sales Order Entry Version ____________ Purchase Order Entry Version ____________ Work Order Parts List Version ____________ Work Order Routing Version ____________
See Also
� � ��� -�.!���� ����+��"�+���#"����.��#�����#����#����� �� �#� ���#"���+������*����
Printing Scheduling Information for Work Centers
1���#���5�"��"��1���#"���;��"��#�������@> $�$A���������"��#���:"#�
7���"��#���:"#�#��� ����������#��������#"���"������*����#��������"��#��:"#����#�"�� ��������� "���"�+���#"���+������*����#��#��#����������"��#���:"#�-�F�"��
�����#����#"����#�������� "���"�+���#"���+��#�����*����#��+���#����*�����2�#��#�. ��@14��$A�����#�����*�����)��#"���#�. ��@1 $$�A�
8–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Repetitive Schedules
�����"�"���+����+�����#"#"�������+��#�"���"��������������� "���������#"��� "����F�"��#�� �#������� ����F�����������.� ����������#"���.�������#��������"#��+������������#"��� "���
��*"����"#�����#"#"�������� �����"#��+�#���+� ��"���#�*3
� ������ "���"#�������������#"��� "��
� ��F����"����#��.��� �"+"��#"��������
9���B�7���+�#��������������E�� "#��2��������#��#��������������#)�� #���#��+���#�����*.��������� �#"���+������"�"��� �+� �������������������#"#"���"�+���#"����������� �#��F���#"#"��#��"����#���+��"#��#��#��F�"��#�#"��������'���� ��5���,�������"��#���9��� �������������� ��
Scheduling Items on a Production Line
7��#���:"��������� "�����*.�����#������� ���#��������*�����+��#��+��" ���+�"#���������������������#"��� "������"���*.��������"�+���#"���"����" ��.��*�#��.��#�.�#��+"��������� �������#��������*�����(+#����������� ����"��#�������� ���F���#"#"�����������+"��#������� ���7��#�#�����#��������#��#������#�����*�����+��#��������#"�� "����"#�"��#�����#��������������������#�����#������*��������#����#�����#�����#��#������� ���"����#����#��������#���F���#"#"������ �����#�����*������"#�"��#������"+"�����#��������1���#�����*.�����������������#���+� ��"���+��3
� ( #���#��:"����� ��#"��
� �� "#�:"��
� 5����#"����#�#�
� -#���(��" �." "#�
� 2�#�������� �
Shop Floor Management
8–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7���� "#�:"���#������������ ���F���#"#"��+������� "���#�����#����9��������������+�#���+� ��"�����#���3
� �� "##"��������#"���������#��� "������"����"��#����#��������� ����#������� "��
� ���� "��#"��������#"���+���#��� "���#������ "��
� ���+�"��������#"���+������� "���#�����#��
7��( #���#��:"����� ��#"���#���"���� � "���+����"��� "�����"#���� �#"���"��<"#�+��#���"#���
9���B������#����"�� "��#����;�����"#���� ���
��� ���������� ��������������������
1���#���)�#��8���������� "��������@> $$6A��������:"��������� "����*.�����
$� ���:"��������� "�����*.���������� �#��#���+� ��"���+"� �3
� 8����05 ��#
� :"��0��
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� 1�����#�
� ������#�
Working with Repetitive Schedules
8–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���������������� ���F���#"#�����������
-+������������#���#�#� �F���#"#����������#��#�������� ���#����#���"� ��������"���.�+���"#������#�������F���#"#������ ������#����#��������9�����#�����#��#�������� ��.�+���#����#����������#�������
4� ������"+������ #���#�� "����������������������#����������( #���#�:"���+���#���)��������
6� ���( #���#��:"����� ��#"����������#���� #���#�� "���#��#��������#�#�� ��#������ "�*��G3
&� ���:"��������� "�����*.������������������������#������������ "#:"���+���#���)��������#�������F���#"#"��
Shop Floor Management
8–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
!� ����� "#�:"����"���������� �#��#���+� ��"���+"� ��#������������ ��F���#"#"��+������� "���#�����#��3
� :"��0��
� E���#"#�������
�� ������"+���"+#�������#��"�+���#"�������� �#��#���+� ��"���+"� �3
� )�F��#���#�
� �#�#���#�
� ���
%� ������� �#��#���� "#��� "�*��G�
%���� @A���������
��� (������+"���������@��0�?A�#��#�"���#"+"����" ����*
�"+#��-������ ��#������������������"+#������#�����
�������#�����������#�#��#������ ���#�������#"������
1������ �����#"�����#�3
-+������� ������ ������*����"+#�+����"������"+#��#�
�"++���#"� �"���� "��. �����#��#��#��"+#���������#��
��� ����D���#�������������������#��#����"+#���
#������ ����D���#�����������������#������#����#�
#�����������#���#"�����������������#��#"���
-+������� ���������"��� ����*����"++���#��"+#�����
��#��#����"+#����������������� "��. ��#"������#�
���"���#�����+�� #��� ���
Working with Repetitive Schedules
8–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Line Scheduling Workbench
Defaults
1. Enter the Status Code to use ____________ when Firming rates and/or work orders. 2. Enter the Order Type to use for ____________ data selection. (Optional) 3. Enter the Shift Code to use for ____________ data selection. (Optional) 4. Enter the number of days to add ____________ to today’s date when defaulting the Thru Date. (Optional)
Display
1. Status Code used to exclude ____________ closed rates from the workbench. (Default ’99’) 2. Enter a ’1’ to display PLANNED ____________ rates and work orders.
Versions
Enter the version to be used for each program. If left blank, ZJDE0001 will be used.
1. Production Status (P31226) ____________ 2. Line Sequencing Workbench ____________ (P3156) 3. Split Lines Window (P3156W) ____________ 4. Enter/Change Rate Schedule ____________ (P3109) 5. Supply/Demand Inquiry (P4021) ____________ 6. Message File Revisions (P3411) ____________ 7. Sales Order Entry (P4210) ____________ 8. Rates/Manufacturing Work Orders ____________ (P48013)
Enter the version to be used. If left blank, ZJDE0004 will be used.
9. Part Availability (P30200) ____________
Sequencing Rates by Classification Scheme
7��#���:"�����F����"�����*.�����#���F������#����#���+#����������� ������#"������"���*.������� ������"�+���#"����.��#���#�� ��#���"����" �.��*�#����#�#�������"�����#"���"+��������#�#����#���#���F�����F���#"#"�������"+#��������.�#���"+#����������9�����#�����#��#������� ��.�+���#����#����������#���������9����������#���+� ��"���"#�"��#���F������#����#�3
� ��#���������
� ��F���������.�
Shop Floor Management
8–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������#������������ ��������#��"����.��#�������"�����#"���+��#����#�0�������)�#�������� ���8��"��"����"#��#���+"#��"+#����������#��������+���������� ��#���F���#"#"�����"����������#������" �. �������"#���9�����#�������"�����#"���#�����#� ����#���#����F���#"#"������� ��+�������������.��*�"��#"��������"+#��� �����.�#���"+#������������"������ ����#�������� ���F���#"#"��#��#��<�����#��������"#�����" �. ����"#�"�#�����#�������� ��#����"��#��� �#��"+#��+�#��� �#�����
1���F���������.���.��"��"����"#��#���+"#��"+#����������#��������+���������� ��#���F���#"#"�����"����������#������" �. �������"#����������#�����������#��������"�"#"� ��F���������.���+�%%%%%%����"��������#���#��#��.���F������� �#�+��#����"+#��� ��"���"#��+#���������"�� ���F�������#���9������������ �����"���#�����+�� #��F�������9������#�"�.�������"��#����F���������.���� ����+��"#���#��������#�������<"#"����#�����.�#��G����"���"���#��#�#���#�#���+�#��������#�������#�.�����#��#����#����#�#�#���� ������#���2���+��#�"������#��#�+����(+#����""���#����F������������������#��#�������� ����"����+���������� ��"#����"��
��� ����������� ������ ��������� ���
1���#���)�#��8���������� "��������@> $$6A��������:"�����F����"����*.�����
$� �����F����"�����*.���������� �#��#���+� ��"���+"� �3
� 8����05 ��#
� :"��0��
�� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*�1"��3
� �++��#"���1��
� ���
� ����������#����F�������+�#����#������� �#��#���+� ��"���+"� ��������������� "�*��G3
� ���
� ��FR
Working with Repetitive Schedules
8–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Line Sequencing Workbench
Process
1. Enter a ’1’ to allow scheduling ____________ across shifts. 2. Enter a ’1’ to allow scheduling ____________ across days. If left blank and scheduling across shifts is allowed, remaining hours for a day will be applied to the last shift of the day.
NOTE: In order to schedule across days, scheduling across shifts must be allowed.
Defaults
1. Enter the number of days to add ____________ to today’s date for the Effective Thru Date. (Optional) 2. Enter the Status Code used to ____________ exclude closed rates from the Workbench. (Default is ’99’).
Shop Floor Management
8–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Hours and Quantities
Shop Floor Management
8–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Hours and Quantities
(������������#���"#����������*��F��#�����������#�������#���������#���������#"�������#������.���+�"#���@����;�����#�����.�;�����#+��5����2���+��#�"��A�#��#�������� �#���"��#��#�#"������"�� �������#����"#�������������#�� ���#������������#�������"�#�#���#�������������F���#"#"��#��#������#"��#���+��#���/�.��
-+������#"��#����������. �������#����������������#����#�����#���#"�� ���#��#���#�������� ���+�������#���"�����"�#�"��#�����#"���"�#��#"���.��"���#��������8��*+ ���������@5 $$� A������������������� ���� ����"��"�"��� ����#��#��"�#"�������F���#"#"������ �#���
���������1 ���2��������#��#���"�#�+�����"#��#��������������5��� �#�����#��#������� �������#����#�������� ����D���������F���#"#"�������������������"�� ����#������#"����������#���"*��+���#����#��������������#��#���#������������#��"��"����"#��#�
�����#����������������F���#"#"��"��#���5��� ��#�������� ��"������*����"��#���2���+��#�"����#����������������F���#"#"������.����� "���#������"+"����*�������#��#�����������"�#�"�������#������+��#�"���������#"��������#"�����#���9��������������������F���#"#"�������*������������ ������#�����������#��.�#���"�����*�������� �;�#����� ������
���������1 ���2��������#��#������������������F���#"#��"�+���#"���"�#����������������#���������#��"#����#���?�������E���#"#"��+�����#��5��� ��"�����#��+����-+��������#���5��� ��#���"�����/���#"����"#��#�������1 ���2��������#��#����������� �����#���5��� ��"�����#��+���#���#����������F���#"#"��"�+���#"���
(+#��������#����������F���#"#"��@�"#������#���?�������E���#"#"��+�������#���5��� ��"�����#��+��A�����������"���������"��#����.�+���������##����#��#���2���+��#�"����#���+��+�#���#��*"���������#�������#"����9��������"���#�����������F���#"#"���"#����� "�����.���"�#"��������#�
9���3�����������������#���#�#���+��������#"���#��#�"�����#"���"�#��#"���#����������������#�#�*���++��#���#" ��������#���?�������E���#"#"��7���#�#������#��#�����*�����)��#"���#�. ��@1 $$�A�
�����#���#���������"�+���#"������#�����*��"#����*������"�����#�+���"��#�����*�����2�#��#�. ��@14��$A�������#���#�����#�" "�+���#"���"��#�����*������"��������#"���#�. ��@1 $$��A�
Shop Floor Management
9–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
?�������F���#"#"�����"#��+�#���+� ��"���#�*3
� ��#�"�����������F���#"#"�
� 7���#"�����������F���#"#"�
� )��"��"���#�#�������#����#"��
9���B�-+��������#���E�� "#��2��������#���#�����������������#�� ��������F���#"#"��#������*�����������������#���+� ��"��3
� (������#�)�� #���#��+������ �#���"#���#��#��F�"��#�#"��
� (��������"��#�<#�+��#�������#�"#��
� ��#�����"�����#"���+����+�� #� �#����*��������������#"���#�#��
9–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"����# "���#�����#"�������+���#������#"����+�����*�������#������� ��������#���������� �#"�������������"��"��#��#��#����"�#�"��#�������������������#����������F���#"#"��
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Post Completionto Inventory
Complete SuperBackflushing
Integrate with Payroll(optional)
Shop Floor Management
9–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� %+��(� ���%+��7��,�����(�������9���� � ��8�"��#���"������#��� ��������������� ��������� ���� ��
� %��� ��� �+5���,�������"��#���9��� �������������� ��
9–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Entering Hours and Quantities
7��#���?�������E���#"#"��������#����������#�� ���������F���#"#"��#�����*������9����������#�������"�����#"���#���"� ���#���"�+���#"���"��"#����+�#���+� ��"���+���#3
2���������������� ��"�+���#������#"�������F���#"#"��+����� �����.�
��#"���"�#��#"���#���
@������������
�����
��"�+���#������#"�������F���#"#"��+��#�����#"��
"�#��#"���#���.����� �����
B�#��#���+� ��"���"���#��#�"�+���#"����.��#���#�"�����������F���#"#"�3
� ��#��#���F���#"#������ �#����� ��������������#"����F���������.����#�"���"#�+�������#�����+������" ����������"����������#�
� ��#�������"���.��"��"����������"���#"���+���������#����#�����#�� ��������#��#������"�� �� ����
� ������������ �#������������F���#"#"��#��#������������#�������#�#���F���#"#����������#"���F���#"#��
9���3�����������#�#���2���+��#�"����"�����#������"�����#"������#��2���+��#�"���#�.�+��#���5��� ��"�����#���������#�������"�����#"��"�� #����� ������#��������#"��"��#������� ��#�������#���?������E���#"#"��������@5 $$��$A�
Shop Floor Management
9–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������� ����� ��������
1���#�����" ������)���#"���'��"��#�������@> $$�A��������?������E���#"#"��
$� ���#�����*��"#����*������"�����#������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� ��*���#�
� ����B��.�
�� �����#����������F���#"#"���� "�*�(����
Entering Hours and Quantities
9–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����"�����#��)��""�������� �#��#���+� ��"��������#���+"� ������ "�*��G3
� ��� �����B��.�
� ��"+#�����
� ?��
� E���#"#�
4� ���� �#��#���+� ��"���+"� �3
� �F�"����#�B��.�
� ����R
� ���?
� 72
� �#
� ��� �����)�#�
� �F�"����#�)�#�
� )���������
Shop Floor Management
9–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
��*���#� (���#��#��#�"���#"+"��#���+"����"� ���"���#����"���#��
#����#"���"�#��.����#������������� �������#"��
���#��#����"+��#�����#�������+�������+"����"� ���"���
9���������������#��$4���"����>���� �����"���$4�"
����+�����"#���/�#���#�
�����#�����"#�#�"�+"� ��+��58���@��#���.�+��
��#�++A��59�8�@�"���������"���.� ����A�����������
����R (����.������#��"��"��#����������+�����"���
-����#"���"�#��#"���������.��#��#��F������#��
+�."��#"��������. ��#���"��#�������+��#����+���
"#����9�������#��*���#�����������#"���.������#"���
-��." ��+���#�"� �������.��#��#���"���#��#�����#"��
#���"��#���+�."��#"��������. �������#��#��F�"���
���"+"�����������#���#��9�����+"���#�������#"��
�F�������+#���������#��#�����#"���"�#��#"���+��#��
"#�������������1 ���2��������#��#������#�"
���.��"��#���.��*+ ��0��+ ���.������#"��������
-�����"���"��������������������.��#��#��F�����
#������. ��#���+��#������"���"����������
1�����#"#"�������+��#�"���������.��#��#�"���#"+"��#��
�F������"����"������"#���"������ ���#��.����������
�*"�����+"� ��� �������#����#���������#"����F�����
#��#��������#�#��.��"��#����"� ����+�"�+���#"���
9�������������"�� �#������#���.�#������<"#"���#���
1���<��� ������$��6�#��������#���.�#�����#���$�����
$ �
&���*� �� � � ������� ��������������� ��������������
�����F���������.���+�#�����#"���#������#�����*
�����9�����#���#��#�"����.��
���? (������#��#�"��"��#��#���#�����+�#"�����#�����=� "������
��3
$ )���:�.��?��
� ��#���:�.��?��
2���"���?��
4 E���#"#"������ �#��
6 E���#"#"���������
% 2"�� ������@�������"�����#��.���A
?�� �������.���+��������"�#����"#�������#����#"���
2"����� � (����/�#���#������#����<#��"����+������� #"� "���.�
#����#��#��#�#��������#�� ����#�����#���#"�����#�
��������"������#�"���"�#�"��������#� ��+���#��
�<#�����������#������#���.��#����#��������#�����
��#���� ��#�������@�����������#�A�
����� ��>5(9�
Entering Hours and Quantities
9–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
�F�"����#�)�#� (������#��#������#�#��������#�#��#��������#�#�
������#���/�.��������"�����+��F�"����#���������
�������." "����#��.�������#����#�����������
�F�"����#�." "����#������.�����������+����#��#��
�"++���#��#���1���<��� �3
8" "���)�#��M����
$���)�#��$�@�����"����������#A��6�)�#����@����#"�����������#A�6��)�#�� �@2�"�#���������������#A��6�)�#��4�@�#�����#���������#A
�����������#�#"�����#"��#��#�������� � ������#��
�#��������"H�����"#�"���������������#�+��������+
#����#����������#����"�� �������#������#����#"��
�+�#����F�"����#�." "���.��#�����+���#�
B�#�3�9��������#��F�"���#������#����������#�
Processing Options for Hours and Quantities
Display
1. Enter a ’1’, for the screen to ____________ be displayed in Order Number format. If left blank, the screen will be displayed in Employee format.
Defaults
1. Enter the Document Type ____________ associated with Shop Floor Activity.
Edits
1. Enter the Status Code beyond ____________ which Shop Floor Activity cannot be entered. 2. Enter a ’1’ to verify that, ____________ for a given operation, the total of the quantity completed plus scrapped does not exceed the ’Quantity At Operation’. If left blank, the verification is not performed. 3. Enter a ’1’ to block employee ____________ rate being written to screen. Leave blank to show employee rates.
Shop Floor Management
9–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Versions
Enter the version for each application. If left blank, ZJDE0001 will be used.
1. Test Results Revisions (P3711) ____________ 2. Manufacturing Scheduling ____________ Workbench (P31225) 3. Production Status (P31226) ____________ 4. Hours and Quantities Update ____________ (R31422) (Default – XJDE0001)
9–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Updating Hours and Quantities
��������#�����������F���#"#"��"�#��#���2���+��#�"����#����������#���#���?�������E���#"#"��7���#��.�#������������"�����������#��#�����*����)��#"���#�. ��@1 $$�A�������� "��#�������+��#�"���������#"���������"#��#�������#���#���8�+���#�����#��"�����#������������ ���#������������"#�����������(+#���������#�"�����������������#� ���#��#�����#����#���?�������E���#"#"��+����
9���������#���������F���#"#"��#����#"���.���"#����+�#���+� ��"����#���3
� )���"���#���?�������E���#"#"��7���#��.�#���������+���#�������
� �� ��#"���#����� "�������#��+���#���?�������E���#"#"��+��
������#�����+���#"���#��#����������������������������#��#���#����#"����#�����+� ��3
� -+��������#��������8��*+ ���������#����#����������F���#"#"���#��F���#"#"��#����#"��������#���"���� �#"����?�������������#����#��?�������E���#"#"��7���#��������#����#�#�������������8��*+ ����#��#���#����#"���+�������#�#�����"�#�"��#�����#"���#��#��������"+�"�#��#"���
� -+��������#��������8��*+ ����������������#��"#������#�������#���������� ���#��#�����#�����#���?�������E���#"#"��+�������#������#����� "�������#��� ��#"���+���#���1��������
� -+�������#��#���#����#"�����#�����#���?�������E���#"#"��+��������������#���1��������� ��#"�����#����� "�������#��� ��#"���#�����#������#��
7���#"�����������F���#"#"�����"#��+�#���+� ��"���#�*3
� 7���#"�����������F���#"#"������� �
� 7���#"�����������F���#"#"��.��.�#��
Shop Floor Management
9–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Updating Hours and Quantities Manually
�����#�����#��� ��#��������#��#����"��#�������#���#���"�������+����"+������<"#�#��������8��*+ ���+����+#��������#��#��#����#"�����#���������#� ���#��#�����#�����#���?�������E���#"#"�+��������������#��������#����*��#��������#��"#��#����#����
�����#�������#��#�����������F���#"#"��#��#��������������"�#��*���������#"���#��#��"���#��"���+"� ��"��#�����*�����)��#"��#�. ��@1 $$�A��(+#��#�������#���#���+���� ��������#��������#��#�������������� �����������������#�����#����5�"��#���5����������+"� ��+���������#��#��#�"#�����#����#��#�#�������������#�.������#�����"��
�������������� ����� �������� ��������
1���#�����" ������)���#"���'��"��#�������@> $$�A��������?������E���#"#"��
$� �����*��"#����*������"�����#������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� ��*���#�
� ����B��.�
�� ������#�������"#��#��������"�#������#"���������� ��������.������ "�*��� ��#�
Updating Hours and Quantities
9–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����"�����#��)��""����������#������@������A�#������#������#���������7���#��+���#���1��������
See Also
� '���� ��(�������9���� � ���#����"���#�������"�����#"���+��?������E���#"#"�
Updating Hours and Quantities by Batch
1���#�����" ������)���#"���'��"��#�������@> $$�A��������?������E���#"#"��7���#��
9������ ������#���� ��#���������#��#��������#���#�.������#����)����#��#��������#�.������#����������. ��*�5�����������+"� ���)���#�������#�������#����#�#���#����#"����7����#��� ��#"���#������#��#���������#��#�������#���#�.������#���������#����#"����#�����������F���#"#"�"�+���#"���+���#�����*������"��������#"���#�. ��@1 $$��A�
Shop Floor Management
9–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Hours and Quantities Update
Interop
1. Transaction Type ____________
A specific transaction type Blank = No outbound transaction processing 2. Outbound Subsystem UBE ____________
1 = The UBE will be called Blank = The UBE will not be called
CSMS
1. CSMS Journal Entries ____________
1 = Create CSMS journal entries Blank = Do not create CSMS journal entries 2. Flex Accounting ____________
1= Use flex accounting Blank = Do not use flex accounting 3. General Ledger Date ____________
A specific date Blank = Use today’s date 4. Subledger ____________
1 = Default order number Blank = Do not default order number 5. Document Type ____________
A specific document type Blank = Default ’IH’
9–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Statuses and Transactions
(+#��������#����������F���#"#"������������"���#���"�+���#"����"#���� "�����.���"�#"��������#�
)��"��"���#�#�������#����#"������"#��+�#���+� ��"���#�*3
� )��"��"���#���#�#���+����
� )��"��"���#���#�#���+�F���#"#"�
� )��"��"���#���#�#���+�����#"���F���#"#"�
� )��"��"�����������F���#"#"��#����#"��
Reviewing the Status of Hours
9���������"�����*�����"�+���#"���.�+���������#������"��#����#���9��������"� ���#�����#�� �����+������"���� �.��������#���������#����+����������#"������"�#����"#������*������9�������� �������#���?��)��""���+�������������������"���#�����#�� ��#�������������"������� ��+��#��������9�����������#��#������ ���+��#�������#"����
Before You Begin
� 8�+���#����#����"� �����#"�����#���#�#��+����������#���������+#���+� ��"��3
� ��#��#����������#���?�������E���#"#"��+����������#��?�������E���#"#"��7���#��
� 7��#����� "�������#��+���#"���#����#�#�����#"��
Shop Floor Management
9–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������� ���� ��������
1���#�����" ������)���#"���'��"��#�������@> $$�A������������?���#�#��
$� �����*��"#����*������#�#��'�?�������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� ����B��.�
�� �������������#"����F���������.������� "�*��� ��#�
Reviewing Statuses and Transactions
9–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*������#�#��'�?���)��""������"���#���+� ��"���+"� ������#���2���"����:�.���������#�������"��������� "�*��G3
� (�#��
� �#�����
� =�"����
� =�"�����N
%���� @A���������
(�#�� ��"�"�#�����#�� �����"���#"���"����������������"�#
#�����*�����
�#����� ����#����������"�������#��#������<���#�#��"����"�
#������� ������#"����+�#�"�"#���
=�"���� ������"����������#��������F���#"#�����"�#����"#����
����#"���
=�"�����N ������"����������#��"�"����.��#���#�����������#�
Reviewing the Status of Quantities
9��������"� ���#���F���#"#"����#�������"�#�#�������#"�������� ���+�����*������"�� ��"���#�����#�� �F���#"#������������� �#���������������+����������#"����9�������� �������#���E���#"#"��)��""���+������������������"���#�����#�� ��#�������������"������� ���+��#��������9����������#��#������ ���+��#�������#"���
Before You Begin
� 8�+���#����#����"� �����#"�����#���#�#��+����������#���������+#���+� ��"��3
� ��#��#����������#���?�������E���#"#"��+����������#��?�������E���#"#"��7���#��
� 7��#����� "�������#��+���#"���#����#�#�����#"��
� ����� ��� ��(�������9���� � ���
Shop Floor Management
9–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������� ���� ���� ��������
1���#�����" ������)���#"���'��"��#�������@> $$�A�����������E���#"#"���#�#��
$� �����*��"#����*������#�#��'�E���#"#"������� �#��#���+� ��"��+"� ������� "�*�1"��3�
� ����B��.�
�� �������������#"����F���������.������� "�*��� ��#�
Reviewing Statuses and Transactions
9–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*������#�#��'�E���#"#"��)��""������"���#���+� ��"���+"� ������ "�*��G3
� ���� �#��
� �#�����
� =�"����
� (#�����#"��
� �������
� =�"���������
%���� @A���������
���� �#�� �������.���+���"#�����"##���+���"����#�"���� �
������#����"����"#���#�����#������#����"������"#
�+���������+"����+��#�"�"#���
-��#���2���+��#�"����#���������*������"�����#��
#�"�+"� ������"��"��#������ �#������������F���#"#"��
����F���#"#��#����"���#��"����.��#���#�����������#����
�#����� ����F���#"#���+���"#��++��#���.��#�"�#����#"���
(#�����#"�� ����F���#"#��#��#�"����"�� ���#�#���#����#�#�����*
���#��
5����#�9"� � ���������#����#��.��� ���#���#��#�����"�������
� ����#��8���������#���������.�"����� ����#�"����
�����#���"���#�����+������#����������5����#���
�+��"�������������#� ������
Reviewing the Status of Operation Quantities
9��������"� ���#�����#"���"�#��#"��������#"���F���#"#���F���#"#������ �#�������F���#"#���������+������*������"�� ��"���#�����/��#���F���#"#����� �#��������/��#����"� ���+�����������#"�������+��#�����#"������5���"�����#"���� �������#����+"���#�����+�� #�+�������#������#�#����
Shop Floor Management
9–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������� ���� �������������� ��������
1���#�����" ������)���#"���'��"��#�������@> $$�A������������#"��E���#"#��-�F�"��
$� �����*��"#������#"���E���#"#"������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� 8����05 ��#
� ����B��.�
�� ����������������.������� "�*��� ��#�
Reviewing Statuses and Transactions
9–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �������#"���E���#"#"��-�F�"�����"���#���+� ��"���+"� ������� "�*����� 3
� ���� �#�����#�
� 5�/��#��������
� 9"� �
Processing Options for Operation Quantity Inquiry
Defaults
Status Info
1. From Status ____________ 2. Thru Status ____________
Reviewing Hours and Quantities Transactions
1���#�����" ������)���#"���'��"��#�������@> $$�A��������?������E���#"#"��5��+�
����?�������E���#"#"��5��+����#� "#�� � �.�������������� �#��F���#"#"��#��#��������������"�#�����*������9��������"�#�#����������F���#"#"��#����#"���#��#������.������#����������"���#����.�+���������##����#��#�������� � ������#����8�+���#���������#����#���#����#"������.������������������#����(+#��������#�#�����#���������#�.���������������#����#"����#�����������F���#"#"��"�+���#"���+���#�����*������"�������#"���#�. ��@1 $$��A�
Shop Floor Management
9–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completions
Shop Floor Management
9–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
10–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completions
���������+"�"�������"���"#������#�������+ �������������#�������#������ �#"���#��"����#������������ �#"���#����#"���#��#�������#��"��#�������1 ���2��������#��#�������#��#���"#���F���#"#�������"��#��-����#���2��������#��#���
9������#��������8��*+ ����������� �#"���������#����������� �#"���#���*����������#������� �#"�����*.�����������#����������� �#"���#��#������� ��
���� �#"������"#��+�#���+� ��"���#�*3
� ���� �#"����"��#����*����
� ���� �#"����������*����
� ���� �#"����#������� �
-+���������#���������������#����#���+� ��"���"�#���#"���+��#������ �3
�������������������
�����������
����-����#���2��������#��#���� �������#��#��*
��#�"� �.�#�����"����#�����#����� ���#"�������#��
����+ ����9��������������"����#���"������
����"#���#������ �#�����������#��*�����F���#"#"�
#�������#�#��������#"��������
Shop Floor Management
10–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������� �����������
�����������
-+����������#����#"���+����.����0� ��#�#��#���
�����������#� ��#���:���#"�����#�" �+�������������
������#��.��*+ ���#����#"��������#����#������#���
������������"#��#��� ���#"�����#�" �"�+���#"����-��#�"
���������� ��#�:���#"�����#�" �-�+���#"��������+�
����"������������#��#�#���F���#"#"��"��#���:���#"��
��#�" �-�+���#"���#�. ��@14&��A�������"#��#�����
��� ����*����� ��#"���+���#���+���������"�"��
F���#"#��.�"����������#������#�"�#����#"��
��������"���#���:���#"�����#�" �+����������"��#��
#����+�#��������8��*+ ���+���
-+�#���"#���.�"�����������������"#��+�������#��#��
��#��������#�"����#����#�����#��#����"��#�����#�"
�����+�#���:���#"�����#�" �+����( #�������������
���"���#������ ����#����#�����+���#���+� ��"��
��"#3
� �����"������"#��+�������"��#���#��#�������#�� �#� ��� ����"+"�������� "��.�����������"#��+
�����������"���"��#���-#���2�#��
� ������"#��+��������"� ���+��� ���#�#���� �#�
� ����#��#�����#��� #�"����� �����.�
�����"���.�#�������"#��+�������
�����#���� �����"#��+��������� ���"��#���+� ��"��
����"#"��3
� �������"#��+��������������#�"���� ��������#"� F���#"#��+��#��#���"#��+�������
� 9��������� �����+" ��� �#;#������"#��+����������+"����"��#���7�"#��+�2�������+"�"#"���.��-#����.��-#���>����+���
�����#���� �����"� ���#���:���#"�����#�" �+�������
���"���"����#���#��#���.����0� ��#���<���#�����
"����#���"�������������� ������ ���#"�����#�" �����
"�"��#��� ���#"����-��#�"������#���F���#"#��"���#���#"�� �
�������+���#���"�� �� ���#"�����#�" �
10–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
=����������������
�����������
�"#��#���E�� "#��2��������#��#��������������*��"#�
#�#��� #����������#���+� ��"��3�
� ���#������������������������� �#����*���������#������� �
� )�������#�� ���������F���#"#"�� 8��*+ ��� �.��������#
(�������#����*��������� �#"����"�� ��"���F���#"#�
���� �#�������F���#"#���������������������#��
+� ��"��3
� (������#�)�� #���#��+������"#����F�""��#�#"������������ �#"��
� )��"�������"��#�<#�+��#�����*����� ��#�����"�����#"���+����+�� #� �#����*���������
����#"���#�#��
(�����.��*+ ��� �.��������#�"� �+������*���������
�������#���+� ��"��3
� (������#�)�� #���#��+������"#���#��#��F�"�#�#"��
� )��"�������"��#�<#�+��#�������#�"#�������"#����#"��
Shop Floor Management
10–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����#�������#������ �#�. ���+#����*��������#������� �������� �#��������+� ��"�������"��"���#"+"��#����#�. ���
Shop Floor ManagementWork Order Inventory Completion
(P31114)
Inventory ManagementInventory update inthe Item Location
table (F41021)
Inventory ManagementWrite records in the Item
Ledger table
ManufacturingAccounting
General AccountingWrite G/L Transactionsin the Account Ledger
table (F0911)
(F4111)
Actual variance update in theWork Order Variance table(F3104) and unaccounted
units update in the Work OrderMaster table (F4801)
10–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����+� ��"�������"��" �#�#��#��������+�����*��������#������� �������#���������� �#"�������������"���#"+"��#�����"�#�"��#������������������+���#������� �#"���
Create Work Orders
Rate Schedules
or
Attach RoutingInstructions
Attach Parts List
PerformCommitments
CheckAvailability
Issue Inventory
ScheduleWork
Record Hoursand Quantities
Post Completionto Inventory
Complete SuperBackflushing
Integrate with Payroll(optional)
Shop Floor Management
10–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� ���������� ��!��"������ ���+������"�+���#"����.��#� �#����#�
� %+��(� ���%+��7��,�����#�� ��� ���8�"��#���"������#��� ��������������� ��������� ���� ��
10–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completing Discrete Work Orders
���������+"�"�������"���"#������#�������+ �������������#�������#������ �#"���#��"����#������������ �#"���#����#"���#��#�������#��"��#�������1 ���2��������#��#�������#��#���"#���F���#"#�������"��#��-����#���2��������#��#����
9������#��������8��*+ ����������� �#"���������#����������� �#"���7��#����������#����+��������+�#���+���#"��3
� )���#�� �"#��������� �#�������#�����#"����*�����"�+"�"���
� )���#���#"� ����� �#"�����#���������#�������#�#��������#"������
������"�#��#���"�������������#�����#����� �#"�������������+��#��� �#��#�����������#"������ ��#"����������"������#�����#����+�#�������+��#���"#���������������#���#"� ����� �#"��������#�#�#� ����� �#"���"�����#����#"����������������#���#"� ����� �#"������������� ��"��"��#��#���#����������#��#�"�.�"������������������"�������#"�������"���#"+�������� ��"��#��������#"��������
������������#������� �#"���������#������ �#������#����#���F���#"#��������#����#����"�� "��#�#������� �#���E���#"#��+"� ��������������#��#���� �#"���#���F���#"#��#��#�������"���#����" ������#������������� �#"���
-+������"������� �#"����<"#�+������*������#����#����"� ���"�+���#"��"��#��� �#�����������#����������#�#��+"� ���( ���"+�������#����F���#"#���#���#�������"����#���#��#��� �#��#�#������������#���������#�������#�#�#��
9������� �#���"��#����*�����.������ �#"��������������+�#���+� ��"����� "��. ��#�*3
� ���� �#"�����*������"#���#�.��*+ ��"��
� ��*"����"#��.��*+ ��
� ���� �#"�����#"� �F���#"#"�������*����
� 5���"�����*�����#����������.��*+ ��
� 5���"�����*�����#��#����F���#"#���#�����#"��
� ���� �#"�����*������"#���"� "H�����������#
Shop Floor Management
10–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completing Work Orders Without Backflushing
7��#���5�#"� ����� �#"�����1� ����� �#"���������#����������� �#"���"#���#�.��*+ ��"���#�����#�"� ��
�������������������� ��������������� ����
1���#�����" ������)���#"���'��"��#�������@> $$�A��������5�#"� ���� �#"���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
Completing Discrete Work Orders
10–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#���-#���#���#��*
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
� ����#
6� ������� �#������*������#��� ���#"����#���#����#����"���� ���#"������� �#��#���+� ��"���+"� ������� "�*��G3�
� :���#"��
� :�#0��"�
-+��"�����#�� ���#"���������������� �#������*�����#���� ����� ���#"������� �#�
%���� @A���������
702 (������+"���������@��072A�#��#�"��"��#��#���F���#"#��"�
��"���#���<������"����#���"#����+���<��� �����
@���A���8I�@.�<A�
Shop Floor Management
10–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Work Order Completions (P31114)
Defaults Tab
7��#��������"�����#"���#�����"+��#�����+�� #��������#�#��������#�#������#��#�#����#������������������� �#��"����#���
1. Document Type
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#����#��#�"���"�#����"#�����"����#������� �#"�����������#�#����"��������+"��������@��0��A�#��#�"���#"+"��#����"�"�������������+�#����������#����#��#���������#�#����#�������#�����+�� #��� �����������"#�+���#����� ��#�7���+"���������+���
2. Document Type (Manufacturing only)
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#����#��#�"���"�#����"#�����"����#�������#����#"���������#������#��#������#����#"���+���#�����*��������� �#"���������@5 $$$4A���������#�#���"��������+"���������@��0��A�#��#�"���#"+"��#����"�"�������������+�#���������#����#��#����������#�#����#�������#�����+�� #��� �����������"#�+��#����� ��#�7����+"��������+���
3. Status Code (Optional)
7��#�"�����"�����#"���#�����"+��#�����+�� #�#�#�������+��#�����*������������#�#�������"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+�#����*��������#��#���#�#�������#�������#�����+�� #��� �����������"#�+��#����� ��#�7����+"��������+���
Lot Hold Codes Tab
7��#��������"�����#"���#�����"+��#��� �#��� �������#����"���#����#�������������� �#"����9���������#�����#��+"��� �#��� �������
-+�������#������#�"*�"�������+�#����+"� ���#����#������������� �#"��#��� ��� �� �#��(��"#"��� ���"+����� �����#����+"� ��. ��*��#����#���������#��������� �#"���#�������� �� �#�
1. Lot Hold Code #1
7��#�"�����"�����#"���#�����"+�������+�+"��� �#��� �������#����"���#���#������������� �#"������#������ ������������#�"*���� �����#�"�+"� �. ��*��-+�������#������ ��������#����#������������� �#"���#��#��#��� �������-+�������#������#�"*��#����#������������� �#"���#��� ��� �� �#�
Completing Discrete Work Orders
10–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-+����� �����#�"�+"� ��. ��*��#����#���������#���������� �#"���#������� �� �#�
2. Lot Hold Code #2
7��#�"�����"�����#"���#�����"+�������+�+"��� �#��� �������#����"���#���#������������� �#"������#������ ������������#�"*���� �����#�"�+"� �. ��*��-+�������#������ ��������#����#������������� �#"���#��#��#��� �������-+�������#������#�"*��#����#������������� �#"���#��� ��� �� �#�-+����� �����#�"�+"� ��. ��*��#����#���������#���������� �#"���#������� �� �#�
3. Lot Hold Code #3
7��#�"�����"�����#"���#�����"+�������+�+"��� �#��� �������#����"���#���#������������� �#"������#������ ������������#�"*���� �����#�"�+"� �. ��*��-+�������#������ ��������#����#������������� �#"���#��#��#��� �������-+�������#������#�"*��#����#������������� �#"���#��� ��� �� �#�-+����� �����#�"�+"� ��. ��*��#����#���������#���������� �#"���#������� �� �#�
4. Lot Hold Code #4
7��#�"�����"�����#"���#�����"+�������+�+"��� �#��� �������#����"���#���#������������� �#"������#������ ������������#�"*���� �����#�"�+"� �. ��*��-+�������#������ ��������#����#������������� �#"���#��#��#��� �������-+�������#������#�"*��#����#������������� �#"���#��� ��� �� �#�-+����� �����#�"�+"� ��. ��*��#����#���������#���������� �#"���#������� �� �#�
5. Lot Hold Code #5
7��#�"�����"�����#"���#�����"+�������+�+"��� �#��� �������#����"���#���#������������� �#"������#������ ������������#�"*���� �����#�"�+"� �. ��*��-+�������#������ ��������#����#������������� �#"���#��#��#��� �������-+�������#������#�"*��#����#������������� �#"���#��� ��� �� �#�-+����� �����#�"�+"� ��. ��*��#����#���������#���������� �#"���#������� �� �#�
Shop Floor Management
10–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Sales Orders Tab
7��#��������"�����#"���#�����"+��#���"�+���#"���#��#�#����#��������#���������� �#"������"�#����"#��� ������
1. Completion Lot and Location Numbers
7��#�"�����"�����#"���#�����"+����"������.��#��#�#����#������+��#������ �#"��� �#����.������#������� �#"��� ���#"����=� "���� �����3
$ �����#������#���� ���������.����#������� �#"��� �#����.��� �����#������#���� ���������.����#������� �#"��� ���#"������
#���� ������ "������.����#������� �#"��� �#����.�� �����#������#�����*��������.����#������� �#"��� �#����.��
2. Lot Number and Location Fields
7��#�"�����"�����#"���#�����"+�����#���#����#�������#��#���:�#B��.������:���#"���+"� �����#���� �#���� ��������#�" � "����"#��#�����*���D� �#����� ���#"����=� "���� �����3
8 ��* �����#���������#�����#��#���� ������$ �����#�������#��#���� ������
3. Next Status Code Default
7��#�"�����"�����#"���#�����"+��#�����+�� #��+�#�����<#�#�#�������+��#��� ���������"�����"�����#"���"��� ������"+�#���7���#���� ���������"�����#"���"��#�#������#��
B�<#�#�#�������"��������+"���������@4�0(�A�#��#�"���#"+"��#�����#"�"#���#�#���+�#����������#����#��#���#�#�������#�������#�����+�� #��� ����������"#�+���#����� ��#�7����+"��������+����-+����� �����#�"�+"� ��. ��*�#����#������#���� ��������<#�#�#��+���#���������#"�"#��� ��
4. Next Status Code Update
7��#�"�����"�����#"���#�����"+�����#���#����#�������#��#�����<#�#�#������������ �#���� �������=� "���� �����3
8 ��* �����#���������#�����#��#�����<#�#�#��+����� ������$ �����#�������#��#�����<#�#�#��+����� ������
5. Display Back Order Release Form
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���8��*����)� ����+���+������ �#���.��*������"#����-+�#����#����"� ���#��+�������������"���#���"#���#��#�������.��*��������#�����"��#���
Completing Discrete Work Orders
10–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
"����"�#� ���9�������� ���"������#�.��*�����<"#��������"�������#��"�"#"H��#�����=� "���� �����3
8 ��* �����#���������#��"� ���#���8��*�����)� ����+���$ �����#����"� ���#���8��*�����)� ����+���
-+�����������#�"�����"�����#"������#��#�����"����+�#���8��*����)� ����������@54�$$!A�"��#���8��*�����)� ��������"�����#"������ �����#�.�
6. Back Order Release (P42117)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#������#����� �#��"����#����"#��.��*������"#���������#������"+"��#�����"�������#�������"�����#"���"��#�#���"� ���#���8��*�����)� ���������@54�$$!A�
-+����� �����#�"�+"� ��. ��*��#����#������#���Q������$���"����+�#���8��*����)� �������������"���"������#� �����#���8��*�����)� ����������"� ���"�+���#"���
Process Manufacturing Tab
7��#��������"�����#"���#�����"+�����#���#����#���� ������ �������;�����#�����.�;�����#��������#���#����#���"���#��������#� ���#���#���
1. Allow Unplanned Co-Products and By-Products
7��#�"�����"�����#"���#�����"+�����#���#����#������������� �#"���+���� ��������;�����#�����.�;�����#��=� "���� �����3
8 ��* �����#���������#���������� �#"����+���� ��������;�����#����.�;�����#�
$ �����#������������� �#"����+���� ��������;�����#����.�;�����#�
2. Issue Co-Products and By-Products
7��#�"�����"�����#"���#����#��"���"+�#���"����"����"��#���� "�*����"#�#��������"#������"#���������;�����#���.�;�����#�#��#�#����#������ �#���=� "���� �����3
8 ��* �����#���"���"����"��#�#��#��������"#���$ �����#���"���"����"��#�#����;�����#�����.�;�����#�
������$����������"���"����"��#�#����;�����#�����.�;�����#����"���. ������#��#��*� �#�#��#���+"�� ����������#�
Shop Floor Management
10–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Warehouse Management Tab
7��#��������"�����#"���#�����"+������#����#�����������#�����F��#�+����������2��������#�"�#���#"���
1. Putaway Requests
7��#�"�����"�����#"���#�����"+��#����"��#�����#����������#��#�#����#���������=� "���� �����3
8 ��* �����#���������#��������#������F��#�$ �����#�����������#������F��#��� ��� �����#�����������#������F��#������"#�������#����.�#���
-+��������"+������������#��#�����"����+�#����.�#���������#��#�#���#������"��#�����.�#���5�#�����)�F��#�����"�����#"�����������2��������#�#�.��"��#�����*�����-����#������� �#"���������@5 $$$4A�
2. Subsystem Putaway Requests (P46171)
7��#�"�����"�����#"���#�����"+��#�����"����+�#���:���#"����� ��#"����"��������@54&$!$A��"+������������������@�"��#�����#����A�+��#���5�#����)�F��#�����"�����#"������������2��������#�#�.�������#������#�"��"������������"�����#������F��#�
-+����� �����#�"�+"� ��. ��*��#����#������#���Q������$���"����+�#��:���#"����� ��#"����"������������"���"������#� �����#���:���#"���� ��#"����"����������"� ���"�+���#"���
3. Cross-Docking of Backorders
7��#�"�����"�����#"���#�����"+�����#���#����#�����;���*.��*������"#����=� "���� �����3
8 ��* �����#���������#���;���*�.��*������"#���$ �����#�����;���*�.��*������"#���
-+�����������$��#�����#��"� ���8��*�����)� ����1���#��. ��*�@5 $$$4A��� ������#�.�
Completing Discrete Work Orders
10–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completions Tab
7��#��������"�����#"���#�����"+��#���������#��#�#����#������. ����������� �#��"����#����"���#���-����#������� �#"���������@5 $$$4A�
1. Backflush
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#�����*����-���+���@5 $$$ A�#��"�����#�"� �#��#�"�.�������#���F���#"#����� �#����+#��#����#������������+� �"����#������� �#"����=� "���� ����3
8 ��* �����#���������#��"� �����*�����-���$ �����#����"� �����*�����-���� �����#�����+�����. "����<���#"����+���*�����-���
-+��������#�"�����"�����#"�������"+��#�����"����+�#�����*�����-��������@5 $$$ A�"��#�����*�����-�������"�����#"�������� �#"���#�.�
2. Work Order Issues (P31113)
7��#�"�����"�����#"���#�����"+��#�����"����+�#�����*�����-��������#��#�#����#������������#����� ���F�"��#�"�����"�����#"���������*�����-���"��#�#���<���#��
-+����� �����#�"�+"� ��. ��*��#����#������#���Q������$���"����+�#�����������"���"������#� �����#�����*�����-����������"� ��"�+���#"���
3. Status Code (Manufacturing only)
7��#�"�����"�����#"���#��������#�����*�����#�#��������#���.�������"������� �#"���#����#��������#�������-+����� �����#�"�+"� ��. ��*��#���#�����������*������#�����#�#���1���<��� ���"+�"����#������ �#"���"��#��#�%6�����#�����*�����"��#�%6������#���#����#����#���"� ���������
4. Receipt Routing (Manufacturing only)
7��#�"�����"�����#"���#�����"+�����#���#����#���"�"#"�#��#��������+����"�#���#"����7��#�"�����"�����#"���+��"����#"������������"���� ������#�����#������#��������.�+������������"����#������� �#"����=� "��� �����3
8 ��* �����#���������#�"�"#"�#��#��������+�����"�#���#"���$ �����#���"�"#"�#��#��������+�����"�#���#"���
Shop Floor Management
10–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
5. Lot Number
7��#�"�����"�����#"���#�����"+�����#���#����#���� �������#�����"��#��� �#����.���=� "���� �����3
8 ��* �����#���������#�� �������#�����"���#��� �#����.��$ �����#���� �������#�����"���#��� �#����.��
-+�#�"�����"�����#"���"��#�#��. ��*��#��� �#����.��+"� ��"�����#��#������� ������"���#�#���+"#�#"����������� �#������*������?�������"+�#���#������� �#������#"� ����� �#"����+�#��#���*������#����#�����#��##��� �#����.��+"� ��������#������#��� �#����.��+��#���+"#����� �#"����+#��#���*���������+��� ��#�����#"� ����� �#"���
-+����������#�"�����"�����#"����#�#��$�������������"���#��� �#����.������"+����������� ��������������#"� ����� �#"����+�#�����*����������#���������#���#��#�#��� �#����.��+"� ��
6. Negative Quantity on Hand
7��#�"�����"�����#"���#�����"+�����#���#����#����"� �������������������#�����#�"� ����� �#����#�#�����;�����F���#"#��#��������#"�������#��=� "���� �����3
$ �����#����"� ���������������+������#"�����;�����F���#"#"��8 ��* �����#���������#��"� ���������������+������#"�����;����
F���#"#"��
Versions Tab
7��#��������"�����#"���#�����"+����"�����"����+�#���+� ��"��������#��#�#����#������"��#������� �#"�������3
� ���#������*.����
� ��*�������#�
� ��#�)�� #�)��""��
1. Shortage Workbench (P3118)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#������#������*.�����������@5 $$�A�+���#�����*�������� �#"�����#�" �+���
-+����� �����#�"�+"� ��. ��*��#����#������#���Q������$���"����+�#�����#������*.��������������"���"������#� �����#������#�����*.������������"� ���"�+���#"���
Completing Discrete Work Orders
10–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Work Order Entry (P48013)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#�����#�)�� #�)��""���������@5 !$$A�+���#����*��������� �#"�����#�" �+���
-+����� �����#�"���#"���. ��*��#����#������#���Q����������"����+�#�����#)�� #�)��""������������"���"������#� �����#�����#�)�� #�)��""���������"� ���"�+���#"���
3. Test Results Revisions (P3711)
7��#�"�����"�����#"���#�����"+��#�����"���#��#�#����#��������������������#�������<"#�#��#�����#�)�� #�)��""���������@5 !$$A�+���#����*��������� �#"�����#�" �+���
-+����� �����#�"���#"���. ��*��#����#������#���Q����������"����+�#�����#)�� #�)��""������������"���"������#� �����#�����#�)�� #�)��""���������"� ���"�+���#"���
Serial Number Processing Tab
7��#��������"�����#"���#�����"+������#����#���������"����#������ �#"������������������"� ����.���##������#��#�����*�����
1. Lot Serial Number
7��#�"�����"�����#"���#�����"+�����#���#����#������ "��#���� �#��"� ���.��#��#��<"#�"��#����#����=� "���� �����3
8 ��* �����#���������#���� "��#�� �#��"� ����.��$ �����#������ "��#�� �#��"� ����.��
2. Document Type
7��#�"�����"�����#"���#�����"+��#�����+�� #��������#�#����#��#�#����#�����+���"� ����.��"�����������#�#����"��������+"���������@��0��A#��#�"���#"+"��#����"�"�������������+�#����������#����#��#����������#�#���#�������#�����+�� #��� �����������"#�+���#����� ��#�7����+"���������+���-+����� �����#�"�+"� ��. ��*��#����#������#���-2��� ��������-2��� ����#����������#�"� �#��#�������*�����
Shop Floor Management
10–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Interoperability Tab
7��#��������"�����#"���#�����"+��#�����+�� #�#����#"���#����#����#�����#��������<��#�#����#"�������#��"���#"+��#�����#.������.�#���
1. Transaction Type
7��#�"�����"�����#"���#�����"+��#���#����#"���#����#��#�#����#�����+����#.�����"�#�����." "#������"���������#"���#����"��������+"��������@��0��A�#��#�#����#����"���#����#����#"��������"#����� �#������*�������#��#���#����#"���#����#�������#�����+�� #��� �����������"#�+���#����� ��#7����+"��������+����-+����� �����#�"�+"� ��. ��*��#����#���������#��+�����#.�����"�#�����." "#������"���
2. Outbound Subsystem
7��#�"�����"�����#"���#�����"+�����#���#����#�����#"��#��#����.�#���+#��#�����*��������� �#"���������@5 $$$4A��������+� �������������#.�����#����#"����=� "���� �����3
8 ��* �����#���������#���#"��#��#����.�#���$� �����#�����#"��#��#����.�#���
Working with Backflush
7��#������� �#"����"#��8��*+ ���������#�������+� �����#"� ����� �#"����" ��.��*+ ��"���#�����#�"� ��)���"���#�"����������� �#��#���F���#"#��#�#��*��
��*"����"#��.��*+ ������"#��+�#���+� ��"���#�*3
� ���� �#"�����*�����#������.��*+ ��
� )� ��"���� ��.��*������"������� �#"���@��#"��� A
� 2����"������� �#"����"������"�#���#"���@��#"��� A
Before You Begin
� ��#�#��������"�#������"�����#"���#�������#���-����#���-������������#��"���#"+��#�����"����+�#���������#�����
Completing Discrete Work Orders
10–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completing Work Orders through Backflush
9������������ �#"�����" ��.��*+ ��"�����#�"� �����"#���#���1� ���5�#"� ���� �#"���+���
�������������������� ��������������� �
1���#�����" ������)���#"���'��"��#�������@> $$�A������������ �#"���"#��8��*+ ���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ������������������ "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#���-#���#���#��*
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
� ����#
6� ������� �#������*������#��� ���#"����#���#����#����"���� ���#"������� �#��#���+� ��"���+"� ������� "�*��G3
� :���#"��
� :�#0��"�
-+��"�����#�� ���#"���������������� �#������*�����#���� ����� ���#"������� �#�
Shop Floor Management
10–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
&� ���-����#���-���)��""����������#���"#���#��"�������#���������5����-���+���#���)���������
See Also
� #�� ��� ��%��������% �+�����������+ ���#����"���#�������"����#"���+����*�����-����#������� �#"��
Releasing Sales Backorders During Completions
������ ������2��������#��#�����"F�� ��"���#"+"��"#���#��#����.�"������+��#������.��*������"#����������������� �#��#���"#���"��#�������1 ���2��������#��#����"���#���1� ����� �#"������������������� ���#���� ��.��*�����
Before You Begin
� 8�+�������� ����� ��.��*������"������� �#"�����#�����"����#"���#�����. ��.��*������� ������#������������#��"���#"+��#����"����+�#���8��*����)� ����������#�����
Completing Discrete Work Orders
10–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������� �� ��� ��������� ����������������
1���#�����" ������)���#"���'��"��#�������@> $$�A��������1� ���� �#"���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#���-#���#���#��*
4� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� �������
� ��#����� �
� ����#
6� �����*��"#��8��*�������"���#���+� ��"�����+�� #�"�+���#"��3
� ����B��.�
� ����
� -#���B��.�
� E���#"#�����8��*���
� ��"����
-+�#������" �. ��F���#"#��� ��#��������#�.�"������"����"��������#��+" ������� ��+�#���.��*�����#����#�����#��#��������#�+��#��#�����"�#���E���#"#��#����"��+"� �����8��*�����)� ����
%���� @A���������
E���#"#�����8��*��� �������.���+���"#�.��*������"���� �����
2��������#���"����*�����5���"�����"����"#���#��
��#������#����"������"#��+���������+"����+��#�"
"#���
See Also
� #�� ��� ��%��������% �+�����������+ ���#����"���#�������"����#"���+����*�����-����#������� �#"��
Shop Floor Management
10–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Managing Completions that Use Receipts Routing
9����#���������"�#���#"���"��#���5�������#��#���.�����"+�"�������"F������������+����#"������"�#�"��#���7���4 0)�������������#"��������"�7���4 0����9�����#����9�"�������+�#�������#��+"� �����)���"�#�)��#"����+"�"#"���#�������#����#���#������#��#��������"�#��+"� ��"��#���-#��:���#"���#�. ����������"#����"����#�#������"+"�������#"����
�����#������"���"#���#��.����;������� ���#�#��������+������"�#���#"���9�����#���#����9�@9�A�"��#�����;?������ ����+��#����#���#���"���#�� �#�����#"���#������#"���������#����"�����9�"��#���5���+"� �����#������#"���#����"�����9�"��"�����"��#�����;?������ ����
������"+�����#���#����#����"��#�"#���#�����������"�#���#"����������#�"�������#"���#�������"#����9����"������"�#���#"���#��"#���.�������"#������� "��� �#"���"����.�#��
1������+��#����"#����#������ "����#�.��'%%%%%%%%��?�������#����#�������#��#������ "������������#�#�������"�����#"���+����*�������� �#"���"��#������� "�0-#���-�+���#"���������@54 �%�A����������"����#"�����#���#"�� ���#�#�������+��#����"#���#����� "��'%%%%%%%%���������#�#����#���+����"� ��"�������� "��+"� ��"��#���������
Before You Begin
� 8�+���������������������� �#"����"���)���"�#�)��#"�����#�#������"�����#"���#��"�"#"�#��#������"�#���#"��������
Completing Discrete Work Orders
10–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����������������� �� ���������� ��������
1���#���)���"�#�)��#"��������@>4 ($4A��������)��#"��0(�� �"�)��""���
$� �����*��"#������ "�0-#���)� �#"���"������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� 8����05 ��#
�� ������������������ "�*��� ��#�
Shop Floor Management
10–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ������� "�0-#���)� �#"���"������� �#��#���+� ��"���+"� ������� "�*�G3
� �++��#"�����#�
� �<�"�#"�����#�
� B��� �)��#������
-+����������#��"�����#�"� �+��� ���#"���#��#������#� "#������#�����#� "#��+#���������� �#��#�����*�����.�������#"���#������������������� �#"����"#��8��*+ �������������#���2� #"� ��:���#"���+���������#������"#���#������#����"���#�����#�"� �
��� ���#��#���#�#���+�#������"�#���#"�������#����#�#��-�F�"��+��������"��#�����#�" ��+���#���������#�������#"���2������#���#�" �+���
%���� @A���������
B��� �)��#������ (������+"���������@4 0)�A�#��#�"���#"+"�������"�#���#��
��������"�#���#�����"#��+����"���+�����#"��
#��������"���#����#����"��#�"#�����������"�#�
See Also
� ,�� �� ������������ �������"��#���"������#��� ��������������� ��������� ���� ���+������"�+���#"����.��#���#���#"��������#"��"�#��#"���+������+��#�"��
� '���� ��,��� ���"��#���"������������ ���+����#�" ���"�+���#"����.��#��#�"������"�#
� #�� ��� ��%��������% �+�����������+ ���#����"���#�������"����#"���+����*�����-����#������� �#"��
Processing Options for Routing/Analysis Revisions
Process
Cross Ref. Type for Supplier Item ____________ (Default VN)
Enter a ’1’ to automatically display the applications listed below when adding a new item.
Standard Item Master ____________ Non-Stock Item Master ____________ Supplier Prices ____________ Enter a ’1’ for Work Order ____________ Completion Mode
Completing Discrete Work Orders
10–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Versions
Enter the version for each program that is called. If left blank, ZJDE0001 will be used.
Item Master Maintenance (P4101) ____________
Completing Partial Quantities on Work Orders
9����������#������� �#"���������#����������� �#���F���#"#"��+������*����"�������+�#������3�
� 1� ����� �#"������"���� �������#������ �#��� �F���#"#"��+��� ��#�"� ��������*�����
� 5�#"� ����� �#"������"���� �������#������ �#����#��+�#���F���#"#�������+������*�����
������*��"#����*��������� �#"���+����"� ������� �#�������������F���#"#"�����������#����� �#��"�+���#"���+������*�����
������������������ �������� ��������������
1���#�����" ������)���#"���'��"��#�������@> $$�A��������5�#"� ���� �#"���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#���-#���#���#��*
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
6� -+������"����#��#�#���#�#��"��#�������"�����#"�������� �#��#��+� ��"���+"� �3
� ����#
&� -+����������#����� �#"����#�#����"���� ���#"�������� �#��#���+� ��"��+"� ������� "�*��G3
� :���#"��
� :�#0��"�
Shop Floor Management
10–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� #�� ��� ��%��������% �+�����������+ ���#����"���#�������"����#"���+����*�����-����#������� �#"��
Processing Work Orders through Super Backflush
���������8��*+ ������������#��.��*+ ���#����#"������"�#�����*�����#�������"�#���+"����"��#�����#"���"�#��#"���������.��*+ ��"���� ������#��� "����"����#����#�#�#��"����"�#�#�������#�#�������+��#�"��������
1���<��� ��������#��#���#�� ���#�����F�"����#�#���+"#�����#"���"����������#"���������(���������#���#�"� �"�.����#�"�#��#��������#"��������"#�"�� "�����+���"����#����#���"�#��"#�"��#�"�������-��#�"�<��� ���#������ ��#"����"��#�.��#��������
)�#���#����� "��"���� ���#�+��#�����*������#�#���#�#���#�������������+"������ ��"�� ���"�#��"#�"��#��������#"��������#��� "����#���"����#�����������"#��9���������+"�������#"���"��#�������#�"#��D���#"���"�#��#"����#���"����"�����������#����������������#���"�������#"����������#�#����#���#������#���"����#���#����#"���
9���������#������ �#��������������F���#"#"��.������#"���������� ����������#�����#���#"�� ������ �#��#�����*������������������"��������"��#���#����#"��������.��*+ �����������������+���#���+� ��"��#����#"���.������#"��3
� -�����#�#��#�����*����
� )�������������F���#"#"�����"�#�#�����*������#�#�������� ��
� )�����"����#������� �#"��
�����#��������#���#����#"���+���#���������"�#�#��#�����"��"��#��"��#����#"���"�#��#"���.��*�#��#���+"#�����#"�����#������"���������"�#��"+�������.������+"����
9���B�-+��"�����#�� ���#"����������#��������� ������#�"� ����#��#��� �#������"�#���������#��#��������� "���.�+��������������#��#�����<#���� �#"���+������������������ ��%�������� ����������� ��������� ���"��#���"������#��� ��������������� ��������� ���� ���
9��������#�����"�����#"���+��#��������8��*+ ���������#�����#��+� ��"��3
� -��"��#��#�����"����+����"�#���������#������
� �������������#�#����#��.��������������#"���#����#"��
� ����������#��#�#�������+������#"�������#�����*����������
Completing Discrete Work Orders
10–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� -��"��#����#�#�������.��������"�����#"��#����*����������#�.�����
� �#�����������F���#"#"��"��� �#���#�. ��+�� �#������"���.�����+��#�"���������#"��
� �"#�������������"+"�����"����+�#���+� ��"������������#���#"�� �����#���������"#���#��� "���#���3
� ?�������E���#"#�
� 2�#�"� �-��
� ��*��������� �#"��
����"�+���#"���"��#�����#�" ������+�#���"�+���#�����*�����)��#"��-�#��#"���#�. ��@1 $$�A������"�+���#"���"��#�������������"�#����"��#����*�����2�#��#�. ��@14��$A�
������� ����������� ��������� ����������� �
1���#�����" ������)���#"���'��"��#�������@> $$�A������������8��*+ ���
$� �����*��"#������B��.������� �#��#���+� ��"���+"� ������� "�*1"��3�
� �*"��#������B��.�
�� ������#����������.��#��#��������#�#������������ "�*��� ��#�
�����#����"� ��������8��*+ ��������#"������.����+"�����������"�#�������"�������"������
Shop Floor Management
10–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��������8��*+ �������� �#��#���+� ��"���+"� �3�
� �����#"�����#�
� ��� �����B��.�
� E���#"#������ �#��
� ����#
4� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� 5���5�"�#��#�#�
6� ���#��� �#�������"�#����*��������� �#"�����#�" ��������)��"���#��+� ��"���+"� ������� "�*��G3
� ���� �#��
� �������
� ��#����� �
� ����#
� :���#"��
� :�#0��"�
&� ���-����#���-���)��""����������� �"#������.���������5���-#���+���#���)�������������#����� "�*��G�
�����#���������#���"�+���#"��������"���#��#���"���#������������������"�#�#����#��#�"��"�����#�����������#"���
Completing Discrete Work Orders
10–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
-+��������#"���"���+"��������������"�#������#���������"�#�"��#����#�"�����#�"� ��������#� �.���#����������#�������#"���"������������� �#���#����#���"���#���"����"��#�����.��*+ ���� �.��+���#�� �#���+"����������"�#����#��#������"���������"�#�
!� ����"�����#��)��""������"������������ �#�����������������+�#��+� ��"���+"� ������� "�*��G3
� ��� �����B��.�
� ����R
� ���?
� 8��"���"��
� �����"��
� ?��
� E���#"#�
� 72
� �#
%���� @A���������
5���5�"�#��#�#� (������#��#�"��"��#�����#���#�������#"������ ��.�
#�*���#����#�#���+����� �#������#"� ������ �#���=� "�
�������3
8 ��* B�#����#��
5 5�#"� ������ �#�
� ���� �#��
72 (������+"���������@��072A�#��#�"��"��#��#���F���#"#��"�
��"���#���<������"����#���"#����+���<��� �����
@���A���8I�@.�<A�
See Also
� ,�� �� ���+���������(�����+��"�+���#"����.��#�#���#�#���+�����+���*����
� ,�� �� ���+���������9���� � ���+��"�+���#"����.��#�#���#�#���+F���#"#"��+����*����
Shop Floor Management
10–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Super Backflush (P31123)
Defaults Tab
���������"�����#"���� �������#��"���#"+������#"���#�#���+����#"� ����+� ����� �#"���
1. Operation Status for Partial Completions
7��#�"�����"�����#"���#��"��"��#��#���#�#���+��������#"����+�����*������������"���"����������������#�������#"���#���"��#�����#"��������#"� ����� �#������#��#�������#"����#�#�������@ $0��A���� ��#�"#�+���#���7���+"���������+���
2. Operation Status for Full Completions
7��#�"�����"�����#"���#��"��"��#��#���#�#���+��������#"����+�����*������������"���"����������������#���#���"��#�����#"������+� ������ �#�����#��#�������#"����#�#�������@ $0��A���� ��#�"#�+���#���7����+"��������+���
3. Status Code for Update to Work Order Header
7��#�"�����"�����#"���#�����"+��#�����+�� #�#�#�������+��#�����*������������#�#�������"��������+"���������@��0��A�#��#�"���#"+"��#���#�#���+����*��������#��#���#�#�������#�������#�����+�� #��� �����������"#�+��#����� ��#�7����+"��������+���
Versions Tab
���������"�����#"���� �������#�����"+����"�����������"���#���#�����������"#��������#���������+��������8��*+ ����-+����� ����#���+"� ��. ��*�"�������+�#������#"����#����#����#������#���Q������$��"���
1. Hours and Quantities (P311221)
7��#�"�����"�����#"���#�����"+��#�����"����+�#���?�������E���#"#"�������@5 $$��$A�#��#�#����#������#��#��*� �.�������"���������#��������"���#�������+��#�"����+�����*������-+����� �����#�"���#"���. ��*��#���#������#���Q������$���"���
2. Work Order Issues (P3113)
7��#�"�����"�����#"���#�����"+��#�����"����+�#�����*�����-��������@5 $$$ A�#��#�#����#������#���������������#�#��#�����"�
Completing Discrete Work Orders
10–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
"����#���#������*������-+����� �����#�"���#"���. ��*��#����#������#��Q������$���"���
3. Work Order Completions (P31114)
7��#�"�����"�����#"���#�����"+��#�����"����+�#�����*��������� �#"��������@5 $$$4A�#��#�#����#������#��"��"��#�����������"#���#����#���������+��#�������������+�������*�����������#����#�����+�������� �#"����#����#��������#���"#���#��"����#����-+����� �����#�"���#"��. ��*��#����#������#���Q������$�
4. Test Results Revisions (P3711)
7��#�"�����"�����#"���#�����"+��#�����"����+�#�����#�)�� #�)��""��������@5 !$$A�#��#�#����#�����������������������#�)�� #�����#�*�������<"#�+���#�����"�������8��*+ ���+����-+����� �����#�"�+"� ��. ��*��#���#������#���Q������$���"���
5. Manufacturing Scheduling Workbench (P31225)
7��#�"�����"�����#"���#�����"+��#�����"����+�2���+��#�"��������� "����*.�����@5 $��6A�#��#�#����#����" ���������#��������� "�����*.����+����<"#�"�� ��#���+���#�����*��"#������B��.��+���"������8��*+ ����-+����� �����#�"�+"� ��. ��*��#����#����" ����#���Q������$��"���
6. Work Order Entry (P48013)
7��#�"�����"�����#"���#�����"+��#�����"����+���*�������#��@54��$ A#��#�#����#����" ���������#��������#������<"#�"�� ��#���+���#�����*�"#������B��.��+���"�������8��*+ ����-+����� �����#�"�+"� ��. ��*��#���#����" ����#���Q������$���"���
Process Tab
���������"�����#"���� �������#�����"+��#���#�#�� "�"#��#���.�������"���#����#��������#���������8��*+ ����-�����"#"����#���#����� �������#����"+�����#���#����#����"� ���#�����*��������� �#"���+������*����-���+������#���?�������E���#"#"��+���
1. Work Order Status Limit
7��#�"�����"�����#"���#��������#�����*�����#�#�������@��0��A��#��.��������"���#����#��������#����#��������8��*+ ����������1��<��� ���"+�#�"�����"�����#"���"��#��#�%6���������*��������������#�#��%6��#����#����#��������#��������������"+������##���#�#���������8��*+ ������#��#���*��������#��#�����*������#�#���������� ��#"#�+���#����� ��#�7����+"���������+���
Shop Floor Management
10–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. Display Work Order Completions Form
7��#�"�����"�����#"���#�����"+��"+�#����#����"� ���#�����*�������� �#"���+���@5 $$$4A������#����#���+� ������#"� ������ �#��#���+"�� ����#"��� "#������#��������8��*+ ���+����=� "���� �����3
8 ��* �����#����"� ���#�����*��������� �#"���+���$ �����#���������#��"� ���#�����*��������� �#"���+���
-+�#����#���������#��"� ���#�"�+����#����"#����� �#��#�����*�����+��#��F���#"#��#��#�"����"+"������#��������8��*+ ���+����-+��������� �#��F���#"#"�#���"++���#� ���#"���� �#����.������"� ����.���#�����"� ���#�����*�������� �#"�����#�" �+���
3. Display Work Order Issues Form
7��#�"�����"�����#"���#�����"+�����#���#���#����#����"� ���#�����*����-���+���@5 $$$ A�����������������#"�"#���#���������"�#�����#"���=� "���� �����3
8 ��* �����#����"� ���#�����*�����-���+���$ �����#���������#��"� ���#�����*�����-���+���
4. Display Hours and Quantities Form
7��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#���?������E���#"#"��+���@5 $$��$A������#����#����������#"�"#�����"�#���������"�#����#"����=� "���� �����3
8 ��* �����#����"� ���#���?�������E���#"#"��+���$ �����#���������#��"� ���#���?�������E���#"#"��+���
5. Apply Yield
7��#�"���#"���#�����"+�����#���#����#������ "������#"����"� �������#���#��#���F���#"#��#��#�#���������� �#���#��������#"���������"� �������#�����#��"���#�������F���#"#���=� "���� �����3
8 ��* �����#���������#���� ��#�������#"����"� �������#�#��#���F���#"#����� �#���
$ �����#������ "��#�������#"����"� �������#�#��#���F���#"#������ �#���
Completing Discrete Work Orders
10–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Edits Tab
��"�����"�����#"���� �������#�����"+�����#����������#�#���� "��#��#��F���#"#������ �#��������������
1. Validate Quantity at Operation
7��#�"�����"�����#"���#���� "��#��#��#�#���F���#"#������ �#���� ��#��F���#"#���������������#��<�����#���F���#"#���#�����#"����=� "���� �����3
8 ��* �����#���������#��� "��#��F���#"#"���#�����#"���$ �����#����� "��#��F���#"#"���#�����#"���
Processing Work Orders that Use Quantity at Operation
9������#�F���#"#"�����"�#���*���������#"����"����"#���?������E���#"#"���������8��*+ ����1���<��� ���"+������������F���#"#���+������� �#���+������#"����F���������.��$����������������F���#"#���+�4����� �#���+������#"����F���������.�� ����������#�#����F���#"#"���"���"#���#���?�������E���#"#"����������#��������8��*+ ���������������������"++��"��#���+� ��"������3�
� ?�������E���#"#"��� �����#���+��"++���#�#�����+�������*����"����"#"���#��F���#"#"�L������8��*+ ���� �����#���+�F���#"#"���� ��
� ?�������E���#"#"�����"��.�#���������(+#��������#���������F���#"#"�������������"���������"��#������������F���#"#"����#" ��������#��#�����*�������#"���"�#��#"��L���������#�������8��*+ ��F���#"#"���� "���
9���������#������ �#��������������F���#"#"��.������#"���������� ����������#������� �#��#�����*�����"+�#��� �#�����#"���"���+"�������������"�#��������������"���������"��#���#����#"����?�������F���#"#"����� �#����#����"��������#"��������#��<�����#���F���#"#������ �#����#�#�������"�������#"���������8��*+ ���#�#� �#�����#"��+��F���#"#������ �#�������������+��#�������#"��������������#��#�#��#���F���#"#���#�����#"����-+#���#�#� ��<�����#���F���#"#���#�����#"����#����#����"�� "��#�#���+"� ������"� ���������������
������������?�������E���#"#"���#����#�����"+"��#���F���#"#���#����#"���.�+���#�������#���������#������#���#����#"�����������#���"�#�����*�����)��#"���#�. ��������#������#������"�� ����#������#��#���"+��#���F���#"#���#�����#"������"��� �������+����#����#������������"��#��#�������#�����
9��������#�������"�����#"���+��#��������8��*+ ���������#��"��"��#����#���#����#�����"+"���+�������"+"������#"����#��#�#���#�#� �F���#"#����� �#���� ��#���F���#"#���������������#��<�����#���F���#"#���#�����#"���
Shop Floor Management
10–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�����8��*+ ���� �����#���� ��+��������"�#��������� �����������"�#������8��*+ ������"���#���F���#"#���#�����#"���+�����"��������#"���#��.�#���#�#� ��+�#���F���#"#���#�#��#�����#"���� ��#���F���#"#���#�����#"���+��� ���"������������"�#�"����#��� �#�������"�#��
Before You Begin
� ��#�#��������"�#������"�����#"���#����"+��#��#�#���#�#� ��+�#��F���#"#������ �#���� ��#���F���#"#���������������#��<�����#��F���#"#���#�����#"���+�����"��������#"���
������� ����������� ������� �� ��������������������
1���#�����" ������)���#"���'��"��#�������@> $$�A��������?������E���#"#"��
$� �����*��"#����*������"�����#������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� ��*���#�
� ����B��.�
�� ������#��������"�#���������� "�*��� ��#�
Completing Discrete Work Orders
10–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����"�����#��)��""������"+��#��#�#���+� ��"���+"� �����#�"�������#�"�+���#"��3�
� ��� �����B��.�
� �F�"����#�B��.�
� ����R
� ���?
4� ���� �#��#���+� ��"���+"� �3
� ?��
� E���#"#�
6� )��"���#���+� ��"���+"� ������� "�*��G3
� 2"����� �
� ��� �����)�#�
� )���������
See Also
� '���� ��(�������9���� � ���#����"���#�������"�����#"���+��?������E���#"#"�
Shop Floor Management
10–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completing Work Orders with Serialized Components
�������������������� �#"���+���"� "H�����������#��#����#��������#���(��"�#��-����-#���:�#���"� �B��.��@:�BA��������(��#���+�����"� �B��.��(��"�#"����"��� ������". ��"+�����������"�#"����"� ���.�;���#� �����������#�#���"� ����.�����. "��������#����"� ��#������"������"� ����.��������������� �#�"�+���#"������#�����"� B��.��(��"�#"���+���
(+#�����������#���"� ����.��+������*�������������"�#��#����"� "H����������#��"#�����"� "H������. ���������"�#�����"� "H�����������#�"#�����"� "H������. ���������#��#������"�#"���F���#"#��
-�����"#"����#������� �#"���������� �������#����#��������� �#����.��#���������.�#�� �#������"� ����.������F�"���+��#��*"������. "�������#�����"+"��#�������� �#����.�������"� ����.��"+������#�#�����"� B��.��)�F�"���+"� �����#���-#���8����05 ��#�-�+���#"���+���#�������
-+��������� �#����*������"#����������#�#��#������#��"� "H������������#��"����"� ����.��#��#������. "���#����� �#"���
-+������#�#��������"�#������"�����#"���"��#������� �#"����������#���#���� �������#������ �#���� #"� ��"#����"���#��������"� ����.���-+�"�����#�� ���#"�������������� ������ �#��#������ �#�� ���#"���������"� ���.��
�������������������� ������ ������;����������
1���#�����" ������)���#"���'��"��#�������@> $$�A��������5�#"� ���� �#"���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#���-#���#���#��*
9���B�1���"� "H���"#���������������� �#���� ������"#����#���#"���
4� -+�����*����#����"� ����.������� �#��#���+� ��"���+"� �3
� :�#0��"�
6� -+��������D#�*����#����"� ����.�����������"� �B��.��+���#��1��������
Completing Discrete Work Orders
10–37OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
&� �����*��"#��������"� �B��.��������������.���� "�*��� ��#�����#�������#��#���$��
-+��� "#��+��"� ����.��������#��������������#������#��#����.�����"���)��""���+���#���1��������
!� �����"� �B��.��)��""����������:�#0�B�>����#"���+���#���1�������
�����#��������#����������"� ����.��+��� �#���"#������#�����*����
�� � "�*��G�#���#���#��� "#�#����*��"#��������"� �B��.��
%� �����*��"#��������"� �B��.���������#����"� ����.��#��#�������#������ "�*��� ��#�
$�� �����*��������� �#"�����#�" ������ �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
� ����#
$$� ������� �#������*������#���*����� ���#"����#���#����#����"��� ���#"�������� �#��#���+� ��"���+"� ������� "�*��G3
� :���#"��
$�� �������������������#�#����"����������#�#��"���#������*�����������:�#0�B�(��"�#"���+���#���1��������
$ � �����"� �B��.��(��"�#"����������-����-#���+���#���1��������
$4� �����*��"#����"� "H���-����-#����������#�����������#�#��#�������#�#�����"�#��#��#����"� "H������. ������� "�*��� ��#�
$6� �����"� �B��.��(��"�#"����� "�*��G�
$&� �����*��"#����*��������� �#"�����#�" ��� "�*��G�
Shop Floor Management
10–38 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
10–39OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completing Process Work Orders
���������+"�"�������"������������"#������#�������+ �������������#������#������� �#"���#��"����#������������ �#"���#����#"���#��#�������#�"��#��������1 ���2��������#��#�������#��#���"����"��#�F���#"#�������"�#���-����#���2��������#��#���
9������#��������8��*+ ��������� �#"���������#����������� �#"���7��#����������#����+��������+�#���+���#"��3
� )���#�� ���;�����#�����.�;�����#������� �#���+#��#�����#"����*����"����� �#�
� )���#���#"� ����� �#"�����#���������#�������#�#��������#"������
������"�#��#���"�������������#�����#����� �#"�������������#��������#�����;�����#�����.�;�����#�"#����������������������#"������ ��#"���������"������#�����#����+�#�������+��#����"#���������������#���#"� ���� �#"��������#�#�#� ����� �#"���"������#����#"����������������#��#"� ����� �#"������������� ��"��"��#��#���#�����������#��#�"�.�"�����������������"�������#"�������"���#"+�������� ���"��#��������#"�������
������������#������� �#"���������#������ �#������#����#���F���#"#��������#����#����"�� "��#�#������� �#���E���#"#��+"� ��������������#��#���� �#"���#���F���#"#��#��#�������"���#����" ������#������������ �#"���
-+������"������� �#"����<"#�+������*������#����#����"� ���"�+���#"��"��#��� �#�����������#����������#�#��+"� ���( ���"+�������#����F���#"#���#���#�������"����#���#��#��� �#��#�#������������#���������#�������#�#�#��
9������� �#���������*�����.������ �#"��������������+�#���+� ��"����� "��. ��#�*3
� ���� �#"�����*������"#���#�.��*+ ��"��
� ��*"����"#��.��*+ ��
� ���� �#"�����#"� �F���#"#"�������*����
� 5���"�����*�����#����������.��*+ ��
Shop Floor Management
10–40 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� 5���"�����*�����#��#����F���#"#���#�����#"��
� ���� �#"�����*������"#���"� "H�����������#
See Also
� #�� ��� ��� ������%���������#����"���#�������"�����#"���+���*�����-����#������� �#"��
Completing Work Orders Without Backflushing
9����������#������� �#"���������#����������� �#���F���#"#"��+������*������"#���#�.��*+ ��"���#���"����"��#��"�������+�#������3
� 1� ����� �#"������"���� �������#������ �#��� �F���#"#"��+��� "����"��#��������*����
� 5�#"� ����� �#"������"���� �������#������ �#����#��+�#���F���#"#�������+������*����
������*��"#����*��������� �#"���+����"� ������� �#�������������F���#"#"�����������#����� �#��"�+���#"���+������*�����
�������������������� ��������������� ����
1���#�����" ������)���#"���'�5���������@> $$4A��������5�#"� ���� �#"���
Completing Process Work Orders
10–41OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ������������������ "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#��
� �������
� ��#����� �
� ����#
4� ������� �#������*�����#���� ���#"����#���#����#����"���� ���#"������� �#��#���+� ��"���+"� ������� "�*��G3
� :���#"��
� :�#0��"�
6� �����08��5����#����� �#"�������� �#��#���+� ��"���+"� �3
� ���� �#��
� �������
%���� @A���������
702 (������+"���������@��072A�#��#�"��"��#��#���F���#"#��"�
��"���#���<������"����#���"#����+���<��� �����
@���A���8I�@.�<A�
Shop Floor Management
10–42 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Backflush
7��#������� �#"����"#��8��*+ ���������#�������+� �����#"� ����� �#"����" ��.��*+ ��"���#���"����"��#��)���"���#�"����������� �#��#���F���#"#�#��#��*�
9������.��*+ ��"���#�����#�#���"���#����#"���+��"����"��#�#��#�������"����������+#��#�����;�����#�����.�;�����#��+�#�����������������������+����.��*+ ���"���#����#"��������������������#���#"� ���+� ���� �#"����+���;�����#�����.�;�����#��������*�����
��*"����"#��.��*+ ������"#��+�#���+� ��"���#�*3
� ���� �#"�����*�����#������.��*+ ��
� )� ��"���� ��.��*������"������� �#"���@��#"��� A
� 2����"������� �#"����"������"�#���#"���@��#"��� A
� ��##"���#�������������#�+��#�����;�����#�����.�;�����#�@��#"��� A
Before You Begin
� ��#�#��������"�#������"�����#"���#�������#���-����#���-������������#��"���#"+��#�����"����+�#���������#�����
� ��#�#��������"�#������"�����#"���#��"���"����"��#�+��������;�����#�����.�;�����#�����#� �������#��� ������� �#"����+��� ��������;�����#�����.�;�����#�
Completing Work Orders Through Backflush
9������������ �#"�����" ��.��*+ ��"�����#�"� �����"#���#���1� ���5�#"� ���� �#"���+���
�������������������� ��������������� �
1���#�����" ������)���#"���'�5���������@> $$4A������������ �#"���"#��8��*+ ���
Completing Process Work Orders
10–43OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� �*"��#������B��.�
�� ������������������� "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3�
� ���� �#��
� �������
Shop Floor Management
10–44 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ��#����� �
� ����#
4� -+������������ �#"����#��� ���#"����#���#����#����"���� ���#"������� �#��#���+� ��"���+"� ������#����� "�*��G3
� :���#"��
� :�#0��"�
6� �����*�����-����#���-������"���#���"���F���#"#"��
&� ���"���#�����#�"� ��� "�*��G�
!� �����08�;5����#����� �#"������*��������������������"��#��+� ��"���+"� ������� "�*��G3
� ���� �#��
� �������
(+#������� "�*��G��#����#�������#��#�����;�����"����#���+��#����;�����#�����.�;�����#������-����#���-���+���������+��������;�����#�����.�;�����#��� ��"�������#��"���#���"����"��#����#� ��+���������;�����#�����.�;�����#�
Releasing Sales Backorders During Completions
������ ������2��������#��#�����"F�� ��"���#"+"��"#���#��#����.�"������+��#������.��*������"#�������������#��"#���#��#������#.��*�������������������� �#��#���"#���"��#��������1 ���2��������#�#����"���#������� �#"����"#��8��*+ ������������������� ����#���� �.��*����
Before You Begin
� 8�+�������� ����� ��.��*������"������� �#"�����#�����"����#"���#�����. ��#���.��*������� ������#������������#��"���#"+�#�����"����+�#���8��*����)� ����������#�����
�������� �� ��� ��������� ����������������
1���#�����" ������)���#"���'�5���������@> $$4A������������ �#"���"#��8��*+ ���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
Completing Process Work Orders
10–45OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#��
4� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� �������
� ��#����� �
� ����#
6� �����*��"#��8��*�������"���#���+� ��"�����+�� #�"�+���#"��3
� E���#"#�����8��*���
� ����B��.�
� ����
� -#���B��.�
� ��"����
-+�#������" �. ��F���#"#��� ��#��������#�.�"������"����"��������#��+" ������� ��+�#���.��*�����#����#�����#��#��������#�+��#��#�����"�#���E���#"#��#����"��+"� �������*��"#��8��*����
%���� @A���������
E���#"#�����8��*��� �������.���+���"#�.��*������"���� �����
2��������#���"����*�����5���"�����"����"#���#��
��#������#����"������"#��+���������+"����+��#�"
"#���
Managing Completions that Use Receipts Routing
9����#���������"�#���#"���"��#���5�������#��#���.�����"+�"�������"F������������+����#"������"�#�"��#���7���4 0)�������������#"��������"�7���4 0����9�����#����9�"�������+�#�������#��+"� �����#���)���"�#�)��#"����+"�"#"���+���#�������#����#���#������#��#��������"�#��+"� ��"��#���-#��:���#"���#�. ����������"#����"����#�#������"+"�������#"���
�����#������"���"#���#��.����;������� ���#�#��������+������"�#���#"���9�����#���#����9�@9�A�"��#�����;?������ ����+��#����#���#���"���#�� �#�����#"���#������#"���"�#��#"���������#����"�����9�"��#���5���+"� ����#�������#"���#����"�����9�"��"�����"��#�����;?������ ����
������"+�����#���#����#���#���"��#�"#���#�����������"�#���#"���������#��"�������#"���"�#��#"���#�������"#����9����"������"�#���#"���#�"#���.�������"#�������� "��� �#"���"����.�#����"���#������� "�0-#��-�+���#"���������
1������+��#����"#����#������ "����#�.��'%%%%%%%%�
Shop Floor Management
10–46 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
(����� ���������� �#"����"��#�.�������������#��������"#"���������#�����#��������"�"#���#��#������#��������#������������#���"#�������"#����� ����� ����#����#�#��������"�#������"�����#"���"��#������� �#"��������#��� ���#����#���#������ �#��#����#�����+���;�����#����.�;�����#�
�����#�������� ���������� �#"����������#��#�����#����.���.����������F���������.�����#�����;08�;5����#����� �#"����"�����
Before You Begin
� 8�+���������������������� �#"���������������#���)���"�#�)��#"����������#�#�������"�����#"���#��"�"#"�#��#�����#"��������
����������������� �� ���������� ��������
1���#���)���"�#�)��#"��������@>4 ($4A��������)��#"��0(�� �"�)��""���
$� �����*��"#������ "�0-#���)� �#"���"������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� 8����05 ��#
�� ������������������ "�*��� ��#�
Completing Process Work Orders
10–47OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ������� "�0-#���)� �#"���"������� �#��#���+� ��"���+"� ������� "�*�G3
� �++��#"�����#�
� �<�"�#"�����#�
� B��� �)��#������
-+����������#��"�����#�"� �+��� ���#"���#��#������#� "#������#�����#� "#��+#���������� �#��#�����*�����.�������#"���#������������������� �#"����"#��8��*+ ���������#���2� #"� ��:���#"���+��������������#������"#���#�����"���#���"����"��#�
1����;�����#�����.�;�����#������������������� ���#"���.������"��2� #"� ��:���#"���+�����;08�;5����#����� �#"���
%���� @A���������
B��� �)��#������ (������+"���������@4 0)�A�#��#�"���#"+"�������"�#���#��
��������"�#���#�����"#��+����"���+�����#"��
#��������"���#����#����"��#�"#�����������"�#�
See Also
� ����� ��#�� ��� ����� ��,��� ��,��� ����#����"���#�������"����#"���+��)��#"��0(�� �"�)��""��
Shop Floor Management
10–48 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Setting the Resource Percent for the Co-Products and By-Products
7��#�����08��5����#�)��""���+���#��"��"��#�����#������#��+�#���"����"��#��� ��.��"��������#� ��#����;�����#�����.�;�����#��
��� ��������� ���������������������������� ��������������
1���#�����" ��5�2�5���������@> �$�A����������#�0�������5����
$� �����*��"#��5��������� �#��#���+� ��"���+"� ������� "�*�1"��3
� -#���B��.�
� 8����05 ��#
�� �������������#"�������� "�*��� ��#�
� �����#��5����-�+���#"������������08��)��""���+���#���1�������
4� �����08��5����#�)��""�������� �#��#���+� ��"�����#"��� �+"� ������ "�*��G3
� )������5����#
Completing Process Work Orders
10–49OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
���8� (������#��#��"#"���"���#��������������#��
"����"��#�+�����;�����#��.�;�����#�����
"�#����"�#�����;�����#����@�������#A�����"#����
#����� #��+���������8�;�����#����"#���#��#�����.�
���������#�����#����+���������.�#�������#�� ������
-�#����"�#�������#����"#�����+"���������� #��+��
#���.�#������#���#"�� ����������"��#���+� ��"���#���
>���� ���"�#����"�#��������#��*�"#������������ �
��+"����#����"#�������;��"�#�+�����#"���������
�#��������������#�@�"��#��2���+��#�"��A��
"����"��#�@5����2���+��#�"��A��������������"��
#��������#"���������=� "���� �����3
� ��;�����#
8 8�;�����#
- -�#����"�#�������#
8 ��* �#��������������#���"����"��#
��#��#�E���#"#� ����F���#"#���+�+"�"������"#�#��#������<���#�#�"�." ��+
��#�"� �����#"���#������������"�+"� ��� �������#�
���"+�����"���F���#"#"���+���������#�.�������#��
�����#��+�+"�"������������������1���<��� ���$
�������+�� ���#�"��F�"��������"#����#��$�����"#��+
+"�"���������#��?�������"+�������"#��+�+"�"���������#
"�������������������+�� ���#�����F�"������+"�"���
��"#��-��#�"��<��� ���������� ���#����.�#���F���#"#"�
+��$�������������"#��+�+"�"���������#����"+�"���#��
����������#��+�� ���#������"#�
1��#���#N (������#����#��#�#����"�� �#����#�)� �����������
#���� �� �#��#�����#��+���+��#�������#"���"#������
�����#�����+�#���#�#� ���#��+�#�������#�
��#��#��������#����������� �����.���+���<��� ��
��#��6N���6���
&���*� �� � � ������� ��������������� ��������������
��"��� ���"�����"����#�)� ���#���� �� �#�����#
�����#�����+�#�����#�����#������"�� ��"���#�������#"���
#��#�#�����;�����#�����.�;�����#��������#��+��"
����#"�����#��#�����;�����#�����.�;�����#��#�#��#
#���
����#�#� ��+�� ������#�����#��������#"��������#��<����
$��N��( ������#�����#�#��� �#�����#"�����#�#�#�
$��N�
Shop Floor Management
10–50 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
)������N (����.��#��#�"��"��#�����#������#��+�#���"����"��#
��� ��.��"��������#� ��#����;�����#����
.�;�����#�
&���*� �� � � ������� ��������������� ��������������
��"�"�����#��"���"����"��#�����#� ��#����;�����#
����.�;�����#��#���*��������� �#"�����#���#�����
#�#� �"���+�������"����"��#�
1����;�����#�����.�;�����#��#�#���+"�� �����#"���
#��"������������#���#�#�#� �$��N�#��"����
"����"��#�
Completing Partial Quantities on Work Orders
9����������#���5�#"� ����� �#"���������#����������� �#����#��+�#��F���#"#��������+������*��������� �����#"� �F���#"#"���������*��"#���*��������� �#"���+����"� ������� �#��������������F���#"#"����������#����� �#��"�+���#"���+������*�����
���� �#"�����#"� �F���#"#"�������*��������"#��+�#���+� ��"���#�*3
� ���� �#"�����#"� �F���#"#"�
� ���� �#"�������*�����+���� #"� �� ���#"��
9���B�7��#���1� ����� �#"��������� ��#"���#������ �#��� �F���#"#"��+��� "����"��#��������*�����
������������������ �������� ��������������
1���#�����" ������)���#"���'�5���������@> $$4A��������5�#"� ���� �#"���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#��
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
Completing Process Work Orders
10–51OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6� -+������"����#��#�#���#�#��"��#�������"�����#"�������� �#��#��+� ��"���+"� �3
� ����#
&� -+����������#����� �#"���#��#����"���� ���#"�������� �#��#���+� ��"��+"� ������� "�*��G3
� :���#"��
� :�#0��"�
������������������������������������������
1���#�����" ������)���#"���'�5���������@> $$4A��������5�#"� ���� �#"���
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
� �����*��������� �#"�����#�" ������ �#��#���+� ��"���+"� �3
� ���� �#��
4� ���� �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
6� -+������"����#��#�#���#�#��"��#�������"�����#"�������� �#��#��+� ��"���+"� ������� "�*��G3
� ����#
Shop Floor Management
10–52 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
&� �����08������ �#"���)��""�������� �#��#���+� ��"���+"� �3
� E���#"#������ �#��
� :���#"��
Processing Work Orders through Super Backflush
���������8��*+ ������������#��.��*+ ���#����#"������"�#�����*�����#�������"�#���+"����"��#�����#"���"�#��#"���������.��*+ ��"���� ������#��� "����"����#����#�#�#��"����"�#�#�������#�#�������+��#�"�������
9���������#������ �#��������������F���#"#"��.������#"���������� ����������#������� �#��#�����*������������������"���������"��#��#����#"��������.��*+ �����������������+���#���+� ��"���#����#"���.�����#"��3
� -���"����"��#�#��#�����*����
� )�������������F���#"#"�����"�#�#�����*������#�#�������� ��
� )�����"����#������� �#"��
�����#��������#���#����#"���+���#���������"�#�#��#�����"��"��#��"��#����#"���"�#��#"���.��*�#��#���+"#�����#"�����#������"���������"�#��"+�������.������+"����
9��������#�#�������"�����#"���+��#��������8��*+ ���������#�3
� -��"��#��#�����"����+����"�#���������#������
Completing Process Work Orders
10–53OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �������������#�#����#��.��������������#"���#����#"��
� ����������#��#�#�������+������#"�������#�����*����������
� -��"��#����#�#�������.��������"�����#"��#����*����������#�.�����
� �#�����������F���#"#"��"��� �#���#�. ��+�� �#������"���.�����+��#�"���������#"��
� �"#�������������"+"�����"����+�#���+� ��"������������#���#"�� �����#���������"#���#��� "���#���3
� ?�������E���#"#"�
� -����"��#�-��
� ��*��������� �#"��
����"�+���#"���"��#�����#�" ������+�#�����*��"#������B��.��"�#����"���*�����)��#"���-�#��#"���#�. ��@1 $$�A������"�+���#"���"��#������������"�#����"��#�����*�����2�#��#�. ��@14��$A�
����#"������.����+"������������"�#�������"�������"��������#���+���
-+�#����#���������"�#����"�#��+��#�������#"����� �+���F���#"#"�����"� �����"��#�����"#��+���������+"����+��#���"�#����"�#��������#����#������ �#��#���F���#"#���"#������#�#���F���#"#��+���#�������#"�����������#�#�����<#�����#"���
������� ����������� ��������� ����������� �
1���#�����" ������)���#"���'�5���������@> $$4A������������8��*+ ���
$� �����*��"#������B��.������� �#��#���+� ��"���+"� ������� "�*1"��3
� �*"��#������B��.�
�� ������������������ "�*��� ��#�
� ��������8��*+ �������� �#��#���+� ��"���+"� �3
� �����#"�����#�
� ��� �����B��.�
� E���#"#������ �#��
� ����#
4� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� 5���5�"�#��#�#�
6� �����08�;5����#����� �#"����� "�*��G�
Shop Floor Management
10–54 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
&� ���#��� �#�������"�#����*��������� �#"�����#�" ��������)��"���#��+� ��"���+"� ������� "�*��G3
� ���� �#��
� �������
� ��#����� �
� ����#
� :���#"��
� :�#0��"�
!� ���-����#���-���)��""����������� �"#������.���������5���-#���+���#���)�������������� "�*��G�
�����#���������#���"�+���#"��������"���#��#���"���#������������������"�#�#����#��#�"��"�����#�����������#"���
-+��������#"���"���+"��������������"�#������#���������"�#�"��#����#�"���"����"��#��������#� �.���#����������#�������#"���"������������� �#���#����#���"���#���"����"��#�����.��*+ ���� �.��+���#�� �#���+"����������"�#����#��#������"���������"�#�
�� ����"�����#��)��""������"�������+�#���+� ��"���+"� ��������������� "�*��G3
� ��� �����B��.�
� ����R
� �F�"����#�B��.�
� ���?
� 8��"���"��
� �����"��
� ?��
� E���#"#�
� 72
� �#
%���� @A���������
5���5�"�#��#�#� (������#��#�"��"��#�����#���#�������#"������ ��.�
#�*���#����#�#���+����� �#������#"� ������ �#���=� "�
�������3
8 ��* B�#����#��
5 5�#"� ������ �#�
� ���� �#��
Completing Process Work Orders
10–55OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� ,�� �� ���+���������(����+��"�+���#"����.��#�#���#�#���+�����+���*����
� ,�� �� ���+���������9���� � ��+��"�+���#"����.��#�#���#�#���+F���#"#"��+����*����
� "������ ��%��������5+����+�� ����������+�#����"���#�������"����#"���+�������8��*+ ��
Processing Work Orders that Use Quantity at Operation
9������#�F���#"#"�����"�#���*���������#"����"����"#���?������E���#"#"���������8��*+ ����1���<��� ���"+������������F���#"#���+������� �#���+������#"����F���������.��$����������������F���#"#���+�4����� �#���+������#"����F���������.�� ����������#�#����F���#"#"���"���"#���#���?�������E���#"#"����������#��������8��*+ ���������������������"++��"��#���+� ��"������3
� ?�������E���#"#"��� �����#���+��"++���#�#�����+�������*����"����"#"���#��F���#"#"�L������8��*+ ���� �����#���+�F���#"#"���� ��
� ?�������E���#"#"�����"��.�#���������(+#��������#���������F���#"#"�������������"���������"��#������������F���#"#"����#" ��������#��#�����*�������#"���"�#��#"��L���������#�������8��*+ ��F���#"#"���� "���
9���������#������ �#��������������F���#"#"��.������#"���������� ����������#������� �#��#�����*�����"+�#��� �#�����#"���"���+"�������������"�#��������������"���������"��#���#����#"����?�������F���#"#"����� �#����#����"��������#"��������#��<�����#���F���#"#������ �#����#�#�������"�������#"���������8��*+ ���#�#� �#�����#"��+��F���#"#������ �#�������������+��#�������#"��������������#��#�#��#���F���#"#���#�����#"����-+#���#�#� ��<�����#���F���#"#���#�����#"����#����#����"�� "��#�#���+"� ������"� ���������������
������������?�������E���#"#"���.�+���#�������#��������#����#����"+"��#���F���#"#���#�����#"�����#������#���#����#"�����������#���"��#����*�����)��#"���#�. ��������#������#������"�� ����#������#��#����"+�#���F���#"#���#�����#"������"��� �������+����#����#������������"���#��#������#�����
9��������#�������"�����#"���+��#��������8��*+ ���������#��"��"��#����#���#����#�����"+"���+�������"+"������#"����#��#�#���#�#� �F���#"#����� �#���� ��#���F���#"#���������������#��<�����#���F���#"#���#�����#"���
�����8��*+ ���� �����#���� ��+��������"�#��������� �����������"�#������8��*+ ������"���#���F���#"#���#�����#"���+�����"��������#"���#��.�
Shop Floor Management
10–56 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
#���#�#� ��+�#���F���#"#���#�#��#�����#"���� ��#���F���#"#���#�����#"���+��� ���"������������"�#�"����#��� �#�������"�#�
Before You Begin
� ��#�#��������"�#������"�����#"���#����"+��#��#�#���#�#� ��+�#��F���#"#������ �#���� ��#���F���#"#���������������#��<�����#��F���#"#���#�����#"���+�����"��������#"���
������� ����������� ������� �� ��������������������
1���#�����" ������)���#"���'�5���������@> $$4A��������?������E���#"#"����#��
$� �����*��"#����*������"�����#������� �#��#���+� ��"���+"� ������ "�*�1"��3
� ��*���#�
� ����B��.�
�� ������#�����*��������.������� "�*��� ��#�
� ����"�����#��)��""������"+��#������������+�#���"�+���#"���"��#��+� ��"���+"� �3�
� ��� �����B��.�
� �F�"����#�B��.�
� ����R
Completing Process Work Orders
10–57OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���?
4� ���� �#��#���+� ��"���+"� �3
� ?��
� E���#"#�
6� )��"���#���+� ��"���+"� ������� "�*��G3
� 2"����� �
� ��� �����)�#�
� )���������
See Also
� '���� ��(�������9���� � ���#����"���#�������"�����#"���+��?������E���#"#"�
Completing Work Orders with Serialized Components
�������������������� �#"���+���"� "H�����������#��#����#��������#���(��"�#��-����-#���:�#���"� �B��.��@:�BA��������(��#���+�����"� �B��.��(��"�#"����"��� ������". ��"+�����������"�#"����"� ���.�;���#� �����������#�#���"� ����.�����. "��������#����"� ��#������"������"� ����.�������������� �#�"�+���#"������#�����"� B��.��(��"�#"���+���
(+#�����������#���"� ����.��+������*�������������"�#��#����"� "H����������#��"#�����"� "H������. ���������"�#�����"� "H�����������#�"#�����"� "H������. ���������#��#������"�#"���F���#"#��
-�����"#"����#������� �#"���������� �������#����#��������� �#����.���"���������.�#�� �#������"� ����.������F�"���+��#��*"������. "�������#�����"+"��#�������� �#����.�������"� ����.��"+������#�#�����"� B��.��)�F�"���+"� �����#���-#���8����05 ��#�-�+���#"���+���#�������
-+��������� �#����*������"#����������#�#��#������#��"� "H������������#��"����"� ����.��#��#������. "���#����� �#"���
-+������#�#��������"�#������"�����#"���"��#������� �#"����������#���#���� �������#������ �#���� #"� ��"#����"���#��������"� ����.��
�������������������� ������ ������;����������
1���#�����" ������)���#"���'�5���������@> $$4A��������5�#"� ���� �#"���
Shop Floor Management
10–58 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#����*��������� �#"�������� �#��#���+� ��"���+"� ������ "�*�1"��3
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
� �����*��������� �#"�����#�" ��#����$�"��#���+� ��"���+"� �3
� E���#"#����"����
9���B�1���"� "H���"#���������������� �#���� ������"#����#���#"���
4� -+�����*����#����"� ����.������� �#��#���+� ��"���+"� �3
� :�#0��"�
6� -+����������#�*����#����"� ����.�����������"� �B��.��+���#��1��������
Completing Process Work Orders
10–59OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
&� �����*��"#��������"� �B��.��������������.���� "�*��� ��#��������#"�����"#��#���$��
-+��� "#��+��"� ����.��������#��������������#������#��#����.�����"���)��""���+���#���1��������
!� �����"� �B��.��)��""����������:�#0�B�>����#"���+���#���1�������
�����#��������#����������"� ����.��+��� ��+�#���"#������#����*�����
Shop Floor Management
10–60 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�� � "�*��G�#���#���#��� "#�#����*��"#��������"� �B��.��
%� �����*��"#��������"� �B��.���������#����"� ����.��#��#�������#������ "�*��� ��#�
$�� �����*��������� �#"�����#�" ������ �#��#���+� ��"�����#"��� �+"� �3
� �������
� ��#����� �
� ����#
$$� ������� �#������*������#��� ���#"����#���#����#����"���� ���#"������"+�����*����#��� ���#"�������� �#��#���+� ��"���+"� �3�
� :���#"��
$�� ����������� ���#"����#���"����������#�#������ �#������*�����������2� #";:���#"���+���#���1�������
Completing Process Work Orders
10–61OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$ � �����"� �B��.��(��"�#"����������-����-#���+���#���1��������
$4� �����*��"#����"� "H���-����-#����������#�����������#�#��#�������#�#�����"�#��#��#����"� "H������. ������� "�*��� ��#�
$6� �����"� �B��.��(��"�#"����� "�*��G�
$&� �����*��"#����*��������� �#"�����#�" ��� "�*��G�
Shop Floor Management
10–62 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
10–63OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Completing Rate Schedules
7������ �#"�����*.�����#��������#������� ������ �#"����"�����#������������������F���#"#"��+��#����#���������"���������������#�#������"�����#"����#���-����#���-�������?�������E���#"#"��+������������������ �#���#������� ��
�����������+��������� �#"����#����#��������#���"����#��������"�����������#��� ��+�#����F�"���#�. ��+��#���-����#���2��������#��#��������#�������#���F���#"#��#��#�"����� �#���#��#���F���#"#����������+��#�� ���#"���#��#�����"��"��#��
9���B�-+��������#���E�� "#��2��������#��#��������������������#�;.���"�+���#"����������� �#��F���#"#"��#��"����#�������������������#�)�� #��#��+��"#���#��#��F�"��#�#"���
Before You Begin
� ��#�#�������"�����#"���#�������#���-����#���-�������?������E���#"#"��������
Shop Floor Management
10–64 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
��������������� ������
1���#���)�#��8���������� "��������@> $$6A������������ �#"����*.�����
$� ������� �#"�����*.���������� �#��#���+� ��"���+"� ������� "�*�1"��3
� 8����05 ��#
� ��������
� -#���B��.�
� �++��#"���1��
� ���
�� ���� �#��#���+� ��"���+"� �3
� ��#� ��������
� ��#������ �#�
� ���� �#��#���+� ��"�����#"��� �+"� ������� "�*��G3
� E���#"#���������
� :���#"��
� :�#0��"� �B��.�
� ��� ����
� �++��#"���1�����#�
� ��"+#
Completing Rate Schedules
10–65OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� ��������8��*+ ����� "�*��G�
6� ���-����#���-����� "�*��G�
&� ����"�����#��)��""�������� �#��#���+� ��"���+"� �3
� ��� �����B��.�
� E���#"#�
� �#
See Also
� '���� ��(�������9���� � ��#����"���#�������"�����#"���+��?������E���#"#"�
� "������ ��%��������5+����+�� ����������+#����"���#�������"����#"���+�������8��*+ ��
Processing Options for Completions Workbench
Defaults
1. Enter the Schedule Type. ____________ Default value is ’SC’ 2. Enter the Employee Number ____________ (Optional) 3. Enter the Production Line ____________ (Optional) 4. Enter the Number of Days to Add ____________ to the From Date for the Thru Date (Optional) 5. Enter the Status From ____________ (Optional)
Shop Floor Management
10–66 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Enter the Status Thru ____________ (Optional) 7. Enter the status code to use ____________ when closing rates. Default value is ’99’
Versions
Enter the version for each program. If left blank, ’ZJDE0001’ will be used.
1. Super Backflush (P31123) ____________ 2. Hours and Quantities (P311221) ____________ 3. Material Issues (P31113) ____________ 4. Enter/Change Rate Schedule ____________ (P3109) 5. Item Ledger Inquiry (P4111) ____________ 6. Line Schedule Review (P3152) ____________ 7. Schedule History Inquiry ____________ (P31226) 8. Work Order Completions ____________ (P31114) 9. Lot Master Revisions (P4108) ____________ 10. Hours and Quantities Update ____________ (R31422) 11. Name Search (P0101) ____________ 12. Test Results Revisions ____________ (P3711)
Process
1. Enter a ’1’ to automatically ____________ process hours and quantities using the version for R31422. If left blank, R31422 should be submitted manually.
Work Order and Rate ScheduleInformation
Shop Floor Management
10–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
11–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Work Order and Rate Schedule Information
(+#��������������������*��������#������� ������������������*���������#������� ��+���#����#������"�����������#�"�+���#"������������." "#������" �." "#���������� �������������������"�#����#�#��#���������#���++��#"�� �����������*��������#������� ��"�+���#"����9������� ���������." ��+���#�"� �����#� "#�.���"���#���8" ������"���+����
��*����������#������� ��"�+���#"������"#��+�#���+� ��"���#�*3
� ����#"��#"�����*����������#������� �
� )��"��"�����*����������#������� ��"�+���#"��
� ��*"����"#����� �������������"�+���#"��
� ��*"����"#��." ��+���#�"�
Shop Floor Management
11–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
11–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Deactivating Work Orders and Rate Schedules
9����"��#����#�#������#"��#��������*��������#������� ��#��#������ �������#"�����#��#������.�������� �#���������"�#�"��������+�#�����*�������#������� ������"#�������������� ��� ���#�������������� �.�+�����������#"��#��"#����"������#��#�F���#"#��"�+���#"���"��#���-����#��2��������#��#�����������+��#�"���������#"���"�+���#"���"�#����. ���+#���������#"��#��#�����*��������#������� ���
9�����������#"��#����*��������#������� ��#��#�������� ��������"������+�#���+� ��"������3
/���������� ���� ���
�� ��
����������������#���#�#���+�����*��������#�
����� ��#��� �����#����#���"���#"+"��#��������
����� ����"���#"����.�#�������#��� �#��"#����"�"�#��
���������������#������#"��#������*��������#�
����� �����"���#�������. ������#��*�������� �#�
�"#�"�� �������+�#�����*��������#������� �����
"#����"�#�����#"�������������#"���#����#"����
7����� ����������� �#������*��������#������� ���"#�"
�������+���#����#�����#"� ���9������ ������ �#�
#�����*��������#������� ��.�+����� �#"���"#�#�
�����#��#�����+��#�"���������#"�������"����#��
"�+���#"���"�����#����-+������� �#������*��������#�
����� ��.�+������� �#"���"#��#����������"��#���#�.�
"��� �����-+�#���F���#"#������ �#������#�����*������
�#������� ��"� ��#����#���F���#"#���������#����#��
������#������"�"���F���#"#��+���#���E���#"#����
��*�����+"� ��"��#���-#���:���#"���#�. ��@14$��$A�����
������ �#��#�������������� ��
8�+��������� �#�������������������#��+���#��
�#����������#�+"#����� �#��#������������#������ �#�
#�����#� "#�������#"���"�#��#"����##������#��#�������
Shop Floor Management
11–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7������$��������( (��"#"��� ������������#��� �#������*��������#�
����� ��"+������+�#���+� ��"���"�#��3�
� �����������.��"����������. ��������.��"�#���(�����#�:�����#�. ��@1�%$$A
� ������*�����"�������#�����#���#�����*����� 5�#������.����"����#��#�����*��������#�
����� �� :�.�����.��������������"�#�#�����*������
�#������� �
-+��������"�"����������������������������#��#
�������#����� �#��������������F���#"#"�����"�#�"#
.�+��������� �#��"#��
����� ����������������*����������#������� ���#��
�#����� �#��#����.�������#��"�#�#��������9������
����#��������������"��������#�������#�. ���-+�#���
���#�"��"�+���#"���#��#��������#�#���#�"���+#�����
�����#��������.�+��������� �#��#�����9�������� �
�� �#������#�������+�����:�#���"� �B��.��������
��*��������#������� ��+�����"� "H�������#�"
�������
)��"��"���#���#�#���+���*����������#������� �����"#��+�#���+� ��"��#�*3
� ����#"��#"�����*����������#������� �
� �����"���#���#�#���+���*�����#��� ���
� �����"���#���#�#���+��#������� ��#��� ���
� 5��"�����*����
Reviewing Work Order and Rate Schedule Status
7��5����#"����#�#��#���"���#���#�#���+�� ��#��������*�����.����*���#���� "������*�������#������� �����.�����"#������.����F�� "+"���.�#���#�#��������#�����������������������"#�"�� �"�+���#"������� ��������#��������*�����
1���5����#"����#�#����������������5����#"���?"#������������������"��#���#����#"���+���������#���+����� �#"������������#��������#"��������"#�������������� �#����#"���#��#���������#����������F���#"#"�����#�����#�" ��+�#����#����#"���
Deactivating Work Orders and Rate Schedules
11–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9����"��#����#�#����"���� ��+�������*��������#������� ��#��#�����#����#"�� ��#�#����+������#"�� ����#�������#����#��"�����"��������������##������#"��#��
������������������������������ ������� ����
1���#���)�#��8���������� "��������@> $$6A��������5����#"����#�#��
$� ���5����#"����#�#������� �#��#���+� ��"���+"� �3
� 8����05 ��#
�� ���� �#��������������."��#"����+�����#�����+�#���+� ��"���+"� �3
� ��*����#�0:"��
� -#���B��.�
� ����B��.�
� �����������������#������������� ��.����#������� �#��#��+� ��"���+"� �3
� �++��#"���1��
� ���
4� ��� "�"#����������#������������� ���#������"+"��#�#������������ �#������� �#��#���+� ��"���+"� ������� "�*�1"��3
� ����#"����#�#�
� ���
Shop Floor Management
11–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Production Status
Defaults
1. Enter the From Status. ____________ (Optional) 2. Enter the Thru Status. ____________ (Optional) 3. Enter the number of days to add ____________ to today’s date to calculate the default Thru Date. (Optional)
Process
1. Enter ’1’ to subtract Quantity ____________ Cancelled/Scrapped from the Remaining Quantity. If left blank, the remaining quantity value will include cancelled/scrapped quantity.
Changing the Status of Work Orders to Closed
����������������#���#�#���+�����*�����#��� �����#����#���"���#"+"��#��������"���#"����.�#�������#��� �#��"#����"�"�#������������������#�����#"��#������*��������"���#�������. ������#��*�������� �#���"#�"�� ������+�#�����*���������"#����"�#�����#"�������������#"���#����#"���
������������� ���� �������������� ������ ��
1���#�����" ������5����#"���'��"��#�������@> $$$A���������#�0�����������
$� �����*��"#��2���+��#�"�����*���������� �#��#���+� ��"���+"� ������ "�*�1"��3�
� �*"��#������B��.�
�� ����������������.������� "�*��� ��#�
Deactivating Work Orders and Rate Schedules
11–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*�������#�" ��� "�*�#����#�#��,������#�.��#����%%�"��#��+� ��"���+"� �������#����� "�*��G3�
� �#�#�
See Also
� '���� ��%�������(�������#����"���#�������"�����#"���+�2���+��#�"�����*����
Changing the Status of Rate Schedules to Closed
1���#��������1 ���2��������#�(�������������@> $ $A��������8�#���)�#�� ���
1��)���#"#"���2���+��#�"�������#���� ���)�#��������#��� ����#������ ��"+��"#����+�#���+� ��"������#��3
� �#�#��"� ��#�������F�� �#��#����� ������"+"���"��#�������"�����#"��
� �++��#"���#��������#��"� ��#�������F�� �#��#�����#�����"+"���"��#������"�����#"��
���������� ����#���#����#�������#���+� ��"��3
� 5����#����#������� ����#��+���#���E���#"#�������� ����#�" �#�. �@1 $�%A
� )� ����#�������"#���#��+�����F���#"#"��+��#������ "��. ���#�
Shop Floor Management
11–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� "��� ��%���������+��"�+���#"����.��#����"�����#�
Processing Options for Batch Rate Close
Process
Enter in the following:
1. Enter the date to compare to ____________ the Rate Effective Thru Date. All rates for which the Thru Date is less than this date will be closed. If left blank, no rates will be closed. 2. Enter the status for closed ____________ rates. If left blank, ’99’ will be used.
9���3�����������#�#���#�#��#�� ����#���5����#�.��#����#������ ������ ������
#�������2���+��#�"���(�����#"���+��#��#��#��
Purging Work Orders
1���#��������1 ���2��������#�(�������������@> $ $A��������5�������
������*�����5������������ �#��� ��#�����*��������#������� �+��������#���������#��������#���� ��#�����*����������#������ ������#��"����"�#���"�+���#"���+���#���+� ��"���#�. �3�
� ��*�����2�#��@14��$A
� ��*�����-�#��#"���@14���A
� ��*�����5�#�:"#�@1 $$$A
� ��*�����)��#"���@1 $$�A
� ��*������"��������#"���@1 $$��A
����������������*��������#������� ���#����#����� �#��#����.������#��"�#�#��������9���#������#��������������"��������#��#�. ���"+�#������#�"��"�+���#"���#��#������"��#����#�#���#�"���9�������� ���� �#������#������+�����:�#���"� �B��.��������������������*��������#������� �+�����"� "H�������#�
�������#��������#��#����������"�������"� ������ ".����������#��#�#������"�����#"���������#��������#�"� ".��������+� �����.��#�������#�#�����#��@�"#���#�����#�A��1���<��� ���"+����������#�����������������$�����$��#�������� ".���"�����������$�$�$�������#������#������"�� �#�. ���"#��#�������������"#�"��#��#� ".����-+����������#������
Deactivating Work Orders and Rate Schedules
11–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
#�. ���� #"� ��#"������#������������#����#�������#��������������#��#�������� �����"��#��������#�. ��+��#��#������
Before You Begin
� ���� �#��#���������#"���+��#�����*��������#������� ��.�+�����������#����+���#����#�������������%�������� �������� ��"��#��"������#��� ��������������� ��������� ���� ���+��"�+���#"���.��#�����#������ �#��#���������#"���
Processing Options for Purge Orders
Process
Enter a ’1’ to Save the Purged records to a special purge library. (Default of blanks will not save any purged records).
Save Flag ____________
Shop Floor Management
11–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
11–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Work Order and Rate Schedule Information
��������#�#�������+��#�"��������������"++���#���"#"�������.�"����������������#�������#���������+��#�"���"�+���#"����9����"��#�����"�+���#"���#��� �����. ������*�����""�����������F��#"����9��������"���"�+���#"���+����������#�����������." "#������" �." "#�������� �������������9���������"���� �"#���#����#"���"��#����#����(��"#"��� ������������"���� ���*�����#��#���*�����#��� �����#�����#"�� ����*���#��
)��"��"�����*����������#������� ��"�+���#"������"#��+�#���+� ��"��#�*3
� )��"��"�����#����." "#�
� )��"��"������������" �." "#�
� )��"��"���"#��� �����"�+���#"��
� )��"��"����"��#��� "#�"�+���#"��
� )��"��"��������#"����"#��
� )��"��"��������#"��� "���F���#"#"�
� )��"��"��������#"������� "��
� )��"��"�����*����#�� ���
� )��"��"�����������
See Also
� ,�� �� ��"������ ��� � ��
� ,�� �� ��"����! ����� ��� � ��
� ����� ���+�������������� ��
� ,�� �� ���+���������(����
� ,�� �� ���+���������9���� � ��
� ,�� �� ���+��������� ���� ��9���� � ��
Shop Floor Management
11–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Part Useability
7��#���5�#�7��." "#��������#���"� ���#���F���#"#���+�������#�"#���#��#����.����������.�������#�����������#�F���#"#��������#�����/�#�#�������#"���F���#"#��"��� �#"���#��#�����������#�F���#"#�����"�"���+� �"���#��"�"������#�����.�����������.���������������#���#�"� ����������9������ "�"#�#�����#��#��#�������#�������"+"�� �#������������#������+�#���"#���
���������������� ��������
1���#�����" ������5����#"���'��"��#�������@> $$$A��������5�#7��." "#��
$� �����*��"#��7��." "#������� �#��#���+� ��"���+"� ������� "�*�1"��3
� ��������#
� E���#"#�
�� )��"���#���+� ��"���+"� ������� "�*�� ��3
� -#���B��.�
� 5����E�9
� 8�#���E���#"#�
� ���#�-#���B�
� �����8"
%���� @A���������
���#�-#���B� (��"����#���"#������.��������#������"���#���
����#��"#������.��� ������<#��"�����;�+�����
����." "#��#���#���"#������.��@�����#��"#���I)�A�#�
���������#���.#"#�#��"#������.����� ������#��.�
��������#�������.������ "�����.���������+�#��
����"#������.�������+� ��3
� -#���B��.��@��#A�'�(���"��#;�"�"#������#�;�"�����"#������.�
� ����-#���B��.��'������6;�"�"#��+��;+��������+"����� �������"��"#������.�
� ��-#���B��.��'�(��#����6;�"�"#��+��;+��������+"����� �������"��"#������.�
Reviewing Work Order and Rate Schedule Information
11–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Part Useability
Default
Enter default Type of Bill
Type Bill of Material ____________
Versions
Enter the version to be used for each program. If left blank, version ’ZJDE0001’ is used.
Item Search (P41200) ____________ Work Order Entry (P48013) ____________ Item Availability (P30205) ____________ Item Master (P4101B) ____________ BOM Inquiry (P30200) ____________ Item Availability (P41202) ____________
Reviewing Summary Availability
7��#����������(��" �." "#��������#������*�#������" �." "#���+����"#���"�����.��������� ��#��9��������"� ���#�����#��"����#�" ������������������+������.�������� ��+�����.�������
���������� �����������������
1���#�����" ������5����#"���'��"��#�������@> $$$A��������������(��" �." "#��
Shop Floor Management
11–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#��-#���(��" �." "#������� �#��#���+� ��"���+"� ������� "�*1"��3
� -#���B��.�
� 8����05 ��#
�� )��"���#���+� ��"���+"� ������� "�*�� ��3
� 5��
� :���#"��
� ���?���
� ����"##��
� (��" �. �
� ���)���"�#
%���� @A���������
5�� (������#��#�"��"��#�����#���#�"�"�#����"�����
�������� ���#"���+��#�"�"#����"#�"��#�"�#��*"��
���#"����=� "���� �����3
5 5"����#����� ���#"��
� ���������#����� ���#"��
B�#�3��9��������� �����������#�����������*����
�"�����"#�"�������.����������������-����������
#����#������#����"����#�����������#�����+�� #�
����"##�� ����#�#� �F���#"#��#��#�"�����"##���#�������"+"�� ���#"���
����#�#� �F���#"#��"�#�������+�� �F���#"#"��#��#�����
.����� ��������"##���+���#���+� ��"��3
� ��+#�����"##���#���� ������ ?�������"##���#���� ������ ��+#�����"##���#����*����� ?�������"##���#����*����
���)���"�# ����#�#� ����.���+�"#���#��#����������"�#�+�������"+"�
���#"��������#�#� �"�#�������+�� �F���#"#"���+����"#��
#��#���������������"����#��+���� ���#"���
Processing Options for Summary Availability
Versions
Enter the version for each program. If left blank, ZJDE0001 will be used.
1. Item Master ____________ 2. Item Notes ____________ 3. Item Search ____________ 4. Purchase Order Inquiry ____________ 5. Customer Service Inquiry ____________ 6. Open Work Orders ____________
Reviewing Work Order and Rate Schedule Information
11–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
7. Supply and Demand ____________ 8. Bill of Material ____________ 9. Lot Availability ____________ 10. Item Ledger ____________ 11. Branch/Plant Item Information ____________ 12. Location Master ____________ 13. Item Location Information ____________
Display
1. Grade Information ____________
Blank = No information is displayed 1 = Display grade information 2. Potency Information ____________
Blank = No information is displayed 1 = Display potency information 3. Quality Management ____________
Blank = No information is displayed 1 = Use Quality Management. 4. Quantity – Primary Units of ____________ Measure
Blank = No information is displayed 1 = Also display primary units 5. Truncate/Round ____________
Blank = Default to round up 1 = Truncate information in the grid 2 = Round up 6. Customer Self-Service ____________
Blank = Bypass Customer Self-Service functionality 1 = Activate Shopping Cart mode
Reviewing Item Ledger Information
7��#���-#���:�����������#���"� �������#�" ����"#����+�#���#����#"���#��#������������+�����"#��������#����#"���"�� ����#���+� ��"���"�+���#"��3�
� -����#���"������/�#���#������#��+�
� �� ����#����+#��� ������#�
� 5���������"�#
� 2���+��#�"������� �#"�������"��
� 5��"�� �"����#�������#�
Shop Floor Management
11–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������������������
1���#���5�"��"��1���#"���'��"��#�������@> $�$A��������-#���:�����@����()��IA�
$� �����*��"#��-#���:���������� �#��#���+� ��"���+"� ������� "�*�1"��3�
� -#���B��.�
� 8����05 ��#
�� ���������������#����.������� "�*��� ��#�
Reviewing Work Order and Rate Schedule Information
11–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ���-#���:�������#�" ����"���#���"�+���#"���#��#������������ "�*����� �
Processing Options for Item Ledger (The CARDEX)
Default
Enter a Document Type. If left blank, ’*’ will be the default value and all document types will be shown.
1. Document Type ____________
Versions
Enter the version to be used for each program. If left blank, ZJDE0001 will be used.
1. Load and Delivery Ledger ____________ Inquiry (FUTURE)
Display
1. Enter a ’1’ to display Quantity ____________ in Primary Units of Measure along with Quantity in Transaction Units of Measure.
Shop Floor Management
11–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Dispatch List Information
(��"��#��� "#�"����F������ "#"����+�����+��#�"�����*��������#������ ��#��#����#�"����#�" ���"�+���#"����.��#� ���#"����F���#"#�����������"#���F�"����#��9������ �������#���"��#��� "#���" ��.����*����#��� "���
7��#����"��#���:"#�������#�� "#�#�����*�����#��#���������"�"������#"���+�����"������*����#���������*������"��#���#�.�����"�� �����#��#�#�����*����#���9��������"� ����F�����������.��#�#���#����F��#�����#���9�������� ������� ������� ������*�����#��#�����*���#���(��"#"��� �������������������"�#���"�+���#"������������#"��"�#��#"������#� "#������#�#����������F���#"#"��"�+���#"���+����*�����
5���"�����#"���� �������#����+"�����+�� #�+�������#������#�#��������#��� �������� ���#��"��"��#����"�����"����+�#�����*�����5�#�:"#�-�F�"�������#����#��������������������"#�
�����#����� �� �#��#������"�"�������"���� �.��������#�������������#������"�"���F���#"#"���+�#���"#���#��.�������������+� ��3�
+�����������������
����
�#�������������"�������<�@F���#"#�����"�"���0
#������F���#"#�A
+�����������������
����
�#��������� �.������<�@F���#"#�����"�"���0�#�����
F���#"#�A
+�������� �������� �#�������#���#"���'�����������
+�������� ������� ��#� �F���#"#��������'����� �#���F���#"#�
Before You Begin
� ����"� ���#�����#�� �F���#"#"�����������+�#���+� ��"��3
� ��#����#�� �F���#"#"�����#���?�������E���#"#"��+���������#���?�������E���#"#"��7���#�������'���� ��(�������9���� � �������� ��� ��(�������9���� � �����������+��#��#���#������ �#��#����#�*�
� 7��#����� "�������#��+���#"���#����#�#�����#"�������� ��� ��(�������9���� � ��������+�+��#���#���#������ �#��#�"�#�*�
Reviewing Work Order and Rate Schedule Information
11–19OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������ ������� ������������
1���#�����" ������5����#"���'��"��#�������@> $$$A���������"��#��:"#�
$� �����*��"#������#"����"��#�������� �#��#���+� ��"���+"� ������� "�*1"��3�
� ��*����#�
�� ����������������.������� "�*��� ��#�
Shop Floor Management
11–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �������#"����"��#�����#�" �)��""������"���#���"�+���#"���#��#����������� "�*������ �
Processing Options for Operation Dispatch Inquiry
Defaults
1. Enter the Default OPERATION Status Information to preload to the screen at initial inquiry. If left blank, no value will be preloaded:
From Status ____________ Thru Status ____________
2. Enter the Default Number of Days:
Prior to todays date for the From ____________ Date After todays date for the Thru ____________ Date
Versions
Enter the version of Work Order Parts Inquiry to execute. If left blank, ’ZJDE0001’ will be used:
Work Order Parts Inquiry Version ____________
Reviewing Work Order and Rate Schedule Information
11–21OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process
1. Enter ’1’ to subtract Quantity ____________ Cancelled/Scrapped from the Remaining Quantity. If left blank, the remaining quantity value will include cancelled/scrapped quantity.
Reviewing Production History
���� �����. ������*�����""�������������F��#"���������"��#������#���"���#����"#�"�� �"�+���#"������������*��������#������� �������������"���#��������#"����"#������������������"�+���#"�������#������#������#���F���#"#����������"��������������� ���
/������B�1��)���#"#"���2���+��#�"����#�����������#���#�����������#��5����#"���?"#���+����������#���#�"�� #����� �������������"#��#����������#������������#"����F���������.��
���������������������� ����
1���#�����" ��5���"���'�)���#"#"��������@> $$6A��������5����#"��?"#���
Shop Floor Management
11–22 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
$� �����*��"#��5����#"���?"#�������� �#��������������."��#"����+����#�����+�#���+� ��"���+"� �3
� ��*����#�0:"��
� -#���B��.�
� ����B��.�
�� ���� �#��#���+� ��"���+"� ������� "�*�1"��3
� 8����05 ��#
� )��"���#���"�+���#"���
Processing Options for Production History
Defaults
Enter values:
1. Sequence Number – Operations ____________ 2. Enter the default # of days to ____________ be added to today’s date to arrive at Thru date 3. Shift Code ____________
Reviewing Production Line Quantities
1��)���#"#"���2���+��#�"�������:"����"��#���:"#�#���"���#���� ������������"�"���F���#"#"��+��� �"#�������� ���+������#"�� �������#"��� "���
Reviewing Work Order and Rate Schedule Information
11–23OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������������������� ��������
1���#�����" ��5���"���'�)���#"#"��������@> $$6A��������:"����"��#���:"#�
$� �����*��"#��:"����"��#���:"#������ �#��#���+� ��"���+"� ������� "�*1"��3
� 8����05 ��#
� :"��0��
�� )��"���#���"�+���#"���
Processing Options for Line Dispatch List
Defaults
1. Enter the number of days to ____________ add to today’s date for the Thru date. 2. Enter the Shift Code. ____________ (Optional) 3. Enter the From Status. ____________ (Optional) 4. Enter the Thru Status. ____________ (Optional)
Process
1. Enter ’1’ to subtract Quantity ____________ Cancelled/Scrapped from the Remaining Quantity. If left blank, the remaining quantity value will include cancelled/scrapped quantity.
Shop Floor Management
11–24 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing Production Across Lines
7����*��"#��:"��������� ��)��"���#���"���#�������� ���+�#��������#"�� "���+��#���+��" ���+�"#������������-+�"#������������������� #"� ������#"��� "�������#�"���*.�����#���"��������#"������� "�����" �#��"����"#�"������� "��D������"#���
9�������� ���"���#���"�+���#"�������"�� ��
����������������������� �����
1���#�����" ��5���"���'�)���#"#"��������@> $$6A��������:"��������� �)��"���
$� ���:"��������� ��)��"�������� �#��#���+� ��"���+"� ������� "�*�1"��3
� :"��0��
� 8����
� ��#��1��
� ��#��������
�� )��"���#���"�+���#"���
� ����"���"�+���#"�������"�� ���������#����#��#����"��#�.3�����#�.+��#�����#����"#�"�� ������"� �������������#�.�+��#�����#��#��.��"� ���������"�� ���������#��#���+"#�#�.��� �������������������"��#�����#�" ������"��#;������ "�*��������1���#������#����������B��1���#�
Reviewing Work Order and Rate Schedule Information
11–25OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4� ���B����1���#������ �#��#���+"� ��#��#��� �+#��+�#����G�.�##���
6� � "�*�#���+� ��"�����#"�������� "�*��G3
� >"��1��
&� ������#��#���������#�.�+��#�������"�� ��"� ����� �������������������"��#�����#�" ������"��#;������ "�*��������1���#������#���������B���1���#�
!� ���B����1���#������ �#��#���+"� ����<#�#��#��� �+#��+�#����G�.�##��3
�� ������#���+� ��"�����#"�������� "�*��G3
� ���#0>���
%� �������#�("#��#��"��������������������������+���#��+���#����#�" �����#��#��������#�#���"�������"�� ��������������"#�������#�����#����� "�*����#"����
Shop Floor Management
11–26 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Line Schedule Review
Defaults
1. Document Type (Default is ____________ ’SC’) 2. Shift ____________ (Optional)
Versions
Enter the version for each program. If left blank, ’ZJDE0001’ will be used.
1. Rate Revisions (P3109) ____________
Reviewing Work Center Loads
7�������� ��)��"���#����"���#����#������� �� ��������#�����*����� ���+������*����#���9���������"�������������*�������#���+�����*����#�� ����9�������� ��� ��#������"+"����#�������#���"���#��� ����+��#�����*����#���-+���������#����/�#�#�������� ��� �����#�#�����*����#�������������������� �"++���#�+���#����*����/�#���#��7��������"�����#"���#�����"+��#��"�� �"����+� ���������#���.����*�����.�+������+#�� ���������#���.��#������� ��
Reviewing Work Order and Rate Schedule Information
11–27OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
�������������������������
1���#�����" ��5���"���'�)���#"#"��������@> $$6A����������*����#������� ��)��"���
$� �����*����#�������� ��)��"�������� �#��#���+� ��"���+"� ������� "�*1"��3
� 8����05 ��#
� ��*����#�
� ��������
� �++��#"���1��
� ���
�� )��"���#���"�+���#"���
� ����"���#���"�+���#"�������"�� ���� "�*�#���>���"��#�.�
4� ����"���#���"�+���#"���"���"��+���#��� "�*�#���>"��#�.�
Shop Floor Management
11–28 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Work Center Schedule Review
Defaults
1. Document Type ____________
A specific document type Blank = No default
Disp Options
1. Subfile Dates ____________
1 = Monthly 2 = Weekly 3 = Daily
WO Processing
1. Include Work Order Generated ____________ Loads
1 = Before Rate loads 2 = After Rate loads Blank = No Work Order loads 2. From Operation Status ____________
Include as an active operation Blank = No specific status to include 3. To Operation Status ____________
Include as an active operation Blank = No specific status to include
Versions
Exit Versions
A specific version Blank = ZJDE0001
1. Rate Revisions (P3109) ____________
Reviewing Process Orders
1��5����2���+��#�"�������#���5��������-�F�"��������#���"� ��3
� ���������#"����+�#�������
� ����"����"��#������#� "#
� (� "#��+�#�����;�����#�����.�;�����#
� �����<"#"���"�#����"�#���+�����*�������������#"��
Reviewing Work Order and Rate Schedule Information
11–29OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1���#�"�������������������#���+� ��"��3
� (����#���-#���(��" �." "#��������������
� (������������#��#�����#�0����������������
� �"� ���#���"�#����"�#��+�������"+"������#"�����"���#�����"#��+��������+"����+��#���"�#����"�#��"�#�����+�#����"������"#��+������
� �"� ���"�#����"�#��+��� �����#"��
� (����#�����#�0�������8" �������#����*������#�
�������������� ������
1���#�����" ������5����#"���'�5���������@> $$ A��������5�������-�F�"��
$� �����*��"#��5������������� �#��#���+� ��"���+"� ������� "�*�1"��3
� ����B��.�0����
�� �����������������#����������-����"��#0��08�;5����#�+���#���)�������
Shop Floor Management
11–30 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� �����*��"#��-����"��#�������08�;5����#����"���#���+� ��"��+"� �3
� E#�������0���#��#
� E#��-���0����� �#��
� ���8�
11–31OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Supply and Demand Information
���� �������������"�+���#"���"��"��#��#�������������� ����������" �. �F���#"#"��+�����"#���"������"����#����1���#������� �0�������-�F�"���������������������#���+���#�����+"����#�" �"�+���#"��������*�������#� "#������������������� �����������"�+���#"���""�#���#"�� ���"� �����+���#���5�������#�������1 ���2��������#�������� �����2��������#��#����
��*"����"#����� �������������"�+���#"���"�� ����#���+� ��"���#�*3
� )��"��"������ �������������"�+���#"��
� 5"�#"������ �������������"�+���#"��
Reviewing Supply and Demand Information
7��#������� �0�������-�F�"��+���#����"�������������� ����������" �. �F���#"#"��+�������"+"��"#����9�������� �������#���+� ��"���+���#�����+"���#�" �"�+���#"��3
� ��*��"#������������ "��
� 5�#�(��" �." "#�
� ��*��"#����#�" �2����
� ��*��"#���"�����"�
� ��*��"#��5���"���-�F�"�
� ��*��"#��-#���(��" �." "#�
� ��#�������"���-�F�"�
� 5 ��#�2���+��#�"�����#�
�����������F���#"#"����������.����#����������"�� �����+�#��#��*�F���#"#"������ ���������*�������#� "#��� �����������������+� ���� ��� ������"�#�� ��#�����+����#�����������
������� ��F���#"#"����������.����#����������"�� ������;�����"����#������F���#"#"���������������������+��#�"�����*������� ���������������#������� ������� ��F���#"#"��������"#���#�����#��������"�+���#"�������#�����#����" �." "#��.��.����0� ��#�#����� ���#"����
Shop Floor Management
11–32 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
9����������#�������"�����#"���"��#�"�������#�����#���+� ��"��3
� -�� ����.�#����� �������������� ����������+���#���25�02)50�)52�����#�. ��@1 4$$A�
� -�� ����+����#��������+���#���1����#�#�. ��@1 4&�A�
� �"� ������(��" �. ��#��5��"�� "���#��#��� �� �#��#�����"#����" �. ��+�� �����"#".�#"���.�+���#����"�� ��+�+�#������ "��
� �"� ��������� �#"���(��" �. ��#��5��"�� "���#��#��� �� �#��#������"��#�#� ��+�(��" �. ��#��5��"��
� ����"+����"�����"����+����"�#�����������������������������#�����9������ �����#���������������"���+��������"#".�#"��)�F�"����#�5 ���"��������#"���#��#��������#�������#��#�������#��"���"#��#�.�#������#���
� ����"+����"�����"����+�"�� �"���� ��#������9��������#�����"++���#��"����+�"�� �"���� ��#��"�� ����#����������#�#����� "���#��������#�#���+������������������� �����������*��������������"����#"���+��#������� �0�������-�� �"���)� ����#����#�"������ "���"����+�"�� �"���� ��+���#���25�02)5�)������)� ��#�. �@1 4��4A��9������ ���#�#�"���#"���#�����#���������"���#��#�������"�������"#".�#"���)�F�"����#�5 ���"��������#"���#��+��" "#�#��#��*"��������#����#���
5���"�����#"���+��#������� ����������������#�� �������#����"#�"#�������#��#��������H���F���#"#�����" �. ���������#� ���"�����"����+���"�#������������������������������#�����-�����"#"��������������#�������"�����#"���������#�"��+"� ��#���"� ������" �." "#��.����������#����������
Working with Supply and Demand Information
11–33OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
���������� ��������������������������
1���#�����" ������5����#"���'��"��#�������@> $$$A����������� �0�������-�F�"��
$� �����*��"#������ ������������������ �#��#���+� ��"���+"� ������ "�*�1"��3�
� 8����05 ��#
� -#���B��.�
�� )��"���#���"�+���#"���#��#������������ "�*�� ���
See Also
� "������ �� � �������� ��:��������;� ��<"12=0>�"��#������������ ������ ��� ��� ��"���� ���� ���+������"�+���#"�������� ������������
Shop Floor Management
11–34 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Printing Supply and Demand Information
1���#���5�"��"��1���#"���;��"��#�������@> $�$A������������ �0�������
�������� ����������������#�����#������ ������������������" �. �F���#"#"��+�����"#������"����#�����"�� ����F���#"#"���+���#�"� �"��#��+� ��"�����#���"�3
� ��;�����"����#��
� ��+�#��#��*
� �� �����
� 5���������
� ��*����
� 25�02)5�� ���������
� 1����#
� )�#������� �
9��������#�#�������"�����#"���#����#��"H���������#�"����"������������#���+� ��"��3
� ��"##"���"#��������#��#��������H���F���#"#�����" �. �
� ���#� "�����"�����"����+�#������"�#���������#��#��������#�����" ��#������#
� �"� ��"������" �." "#��.�����������#���������
Processing Options for Supply/Demand Report
Process 1
1. Enter a ’1’ to deduct Safety Stock from Availability.
Safety Stock Flag ____________
2 . Enter a ’1’ by the following Routing Quantities to be considered on hand. Any quantity not included will be displayed on the appropriate date.
Quantity in Transit ____________ Quantity in Inspection ____________ User Defined Quantity 1 ____________ User Defined Quantity 2 ____________
Working with Supply and Demand Information
11–35OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process 2
3. Enter a ’1’ to summarize all In Receipt Routing Steps into one line.
Receipt Routing Summary Flag ____________
4. Enter a ’1’ to summarize the Item Balance Quantity records.
Item Balance Quantity Summary ____________ Flag
5. Enter the thru date for the period of transactions to appear on the report. If left blank, all transactions will be printed.
Effective Thru Date ____________
6. Enter the version of Supply/Demand Inclusion Rules to be used for processing.
Supply/Demand Inclusion Rules ____________
1. Enter one of the following: ’ ’ = No ATP Line, ’1’ = ATP Line, ’2’ = Cumulative ATP Line
ATP Line Flag ____________
Display 1
1. Enter a ’1’ to print Planned Orders from the MRP/MPS/DRP generations. If left blank, Planned Orders will not print.
Planned Order Flag ____________
2. Enter the Forecast Type(s) to be included (Up to 5 types). If left blank, the program will not include any Types. Example: for types 01, 02, & BF, enter ’0102BF’ etc.
Forecast Types (5 types maximum) ____________
3. Enter the number of days (+/-) from today’s date that you wish to begin including Forecast records. A blank will use today’s date to begin including Forecast records.
Forecast Lead Days ____________
Shop Floor Management
11–36 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
4. Enter a ’1’ to omit ’Bulk Stocking Type records from report. Blank is the default and ’Bulk’ record types will be printed.
Bulk Stocking Type Flag ____________
Display 2
5. Enter the Unit of Measure you would like to appear on the report. If left blank, Primary units will be used.
Unit of Measure ____________
6. Enter ’1’ to display all quantities at Standard Potency.
Standard Potency Flag ____________
7. Enter ’1’ to reduce quantity available due to lot expiration. (Note: This option will not work with ATP. It this option has to work, Option 1 in Print Options must be set to blank or 2).
Lot Expiration Flag ____________
Process Mfg
1. Enter the Rate Base Schedule Type to be included on the Supply/Demand report. If left blank, Rate Based Items will not appear. (FUTURE)
Rate Base Sched Type (FUTURE) ____________
11–37OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Working with Bills of Material
(+#�������������*��������#������� ������������������." ��+��#�"� �����#� "#��"#����� "���.���"���#���8" ������"���+������.���"��"��������+�#�������#��7��#��������"���#����#��"���"+��������������"++������.�#�����#�����#� "#���." ��+���#�"� �+��#����"++���#�"#���
��*"����"#��." ��+���#�"� ����"#��+����� �#"���#���+� ��"���#�*3
� �����"���." ��+���#�"�
� 5"�#"���." ��+���#�"� �"�+���#"��
Comparing Bills of Material
7��8" ������"���#���������." ��+���#�"� �����#� "#�������#���"� ���� �#�����������#��+�.�#��"#������� ��#������������#�#��#����"++���#�.�#�����#���#����������"�����������"�����#"���� ��#"���
�����"���." ��+���#�"� ����"#��+�#���+� ��"���#�*3
� �����"���#�����#� "#
� �����"�����." ��+���#�"� ���������#� "#
Shop Floor Management
11–38 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
����������������� ��� �
1���#�����" ������5����#"���'��"��#�������@> $$$A��������5�#�:"#�����"���
1���#���="�����������������������#���������.��." ��+���#�"� �"�#�����+��#� "#�
$� �����*��"#�������"����������2����+���#���="��������#���"� ���"#���� �#�����#����� ��#����#��#�����"++���#�
�� ���� �#��#���+� ��"���+"� ��+��#���+"#���#� "#
� ����B��.�
� ���� �#��#���+� ��"�����#"��� �+"� �������#���5�#�:"#������"���$����"��3
� ��*����#�
� �"��#���>���
4� ���� �#��#���+� ��"���+"� �������#���5�#�:"#������"���������"������� "�*�1"��3
� ����B��.�
Working with Bills of Material
11–39OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6� ����"� ��������"������"���#���"�+���#"�������� "�*�� ���
Shop Floor Management
11–40 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������������������������������� ��� �
1���#�����" ������5����#"���'��"��#�������@> $$$A��������5�#�:"#8�2������"���
1���#���="����������������������#���������#���." ��+���#�"� ���#����#� "#�"�#�����+���." ��+���#�"� ���������#� "#�
$� �����*��"#�������"�������� �#��#���+� ��"���+"� �������#���5�#:"#������"���$�����"��3
� ����B��.�
�� ���� �#��#���+� ��"���+"� �������#���8�2������"���������"������� "�*�1"��3
� -#��
� 8����
� (��+���#�
� 8" �����
Working with Bills of Material
11–41OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
� ����"� ��������"������"���#���"�+���#"�������� "�*�� ���
Processing Options for Parts List Comparison
Defaults
1. Bill of Material Type ____________
Blank = The system uses M for manufacturing bill of material.
Display
1. Single Level or Multilevel ____________ Comparison
Blank = The system displays a single level comparison. 1 = The system displays a single level comparison. 2 = The system displays a multilevel comparison.
2. View Mode ____________
Blank = The system uses the bill of material mode. 1 = The system uses the bill of material mode. 2 = The system uses the parts list mode. 3 = The system uses the parts list to bill of material mode.
Shop Floor Management
11–42 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process
1. Include Different Records ____________
Blank = The system displays the components that are different between the two bills of material or parts lists. D = The system displays the components that are different between the two bills of material or parts lists. A = The system displays all the components of the two bills of material or parts lists.
2. Work Center or Item Summary ____________
Blank = The system sorts the information by item number. 1 = The system sorts the information by work center. 2 = The system sorts the information by item number.
3. Subassemblies ____________
Blank = The system includes subassemblies in the comparison. 0 = The system excludes subassemblies from the comparison. 1 = The system includes subassemblies in the comparison.
4. Phantom Items ____________
Blank = The system includes phantom items in the comparison. 0 = The system excludes phantom items from the comparison. 1 = The system includes phantom items in the comparison.
Printing Bill of Material Information
9������������#������ ����#�#����"���." ��+���#�"� �"�+���#"�����+� ��3
� �"�� �� ��� �."
� 2� #" ��� �."
� ���������"�+���#"��
/������B���������������������#��#����������#��������#���+"#�#�����#��F������+���#����##"���"��#�����2����"����+�#�������#��-+�����������#�����#��� ��#"���������"��#��.#�"�����<���#�����"������#���� #�
Working with Bills of Material
11–43OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Printing a Single Level Bill of Material
1���#���5�"��"��5�2��"��#�������@> ��$A���������"�� ��:��� �8" ��+2�#�"� ����#�
5"�#�#����"�� ��:��� �8" ��+�2�#�"� ����#�#����"������"#��D�+"#; ��� ��������#�
See Also
� ,/21?23� ����!����� ��������� ��"��#���,� ������ ��+�������#��� �
Processing Options for Single Level Bill of Material
Display
1. Inquiry Mode ____________
Blank = The system displays the information in multilevel indented format. 1 = The system displays the information in single level format. 2 = The system displays the information in multilevel format. 3 = The system displays the information in multilevel indented format.
2. As of Date ____________
Blank = The system uses the current date.
3. Type Bill of Material ____________
Blank = The system uses type ’M’.
4. Display Sequence ____________
Blank = The system sequences the information by component line number. 1 = The system sequences the information by component line number. 2 = The system sequences the information by operation sequence number.
Shop Floor Management
11–44 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
1. Detail Line ____________
Blank = The system prints only one line of detail. 1 = The system prints a second line of detail for items appearing on the report.
2. Component Locators ____________
Blank = The system does not print component locations. 1 = The system prints component locations.
3. Parent Item Detail Line ____________
Blank = The system does not print a line of detail for the parent item. 1 = The system prints a line of detail for the parent item.
Process
1. Phantom Items ____________
Blank = The system excludes phantom items from the report. 1 = The system includes phantom items in the report.
2. Process Items ____________
Blank = The system excludes process items from the report. 1 = The system includes process items in the report.
3. Subassemblies ____________
Blank = The system excludes subassemblies from the report. 1 = The system includes subassemblies in the report.
4. Text Lines ____________
Blank = The system excludes text lines from the report. 1 = The system includes text lines in the report.
5. Consolidate Component Items ____________
Blank = The system shows individual occurrences of duplicate components in the report. 1 = The system consolidates duplicate components in the report.
Working with Bills of Material
11–45OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
6. Purchased Item ____________
Blank = The system explodes to the next level of purchased item. 1 = The system does not explode to the next level of purchased item.
7. Shrinkage ____________
Blank = The system excludes shrink from the calculation of requested quantity. 1 = The system includes shrink in the calculation of requested quantity.
8. Scrap ____________
Blank = The system excludes scrap from the calculation of extended quantity. 1 = The system includes scrap in the calculation of extended quantity.
9. Yield ____________
Blank = The system excludes yield from the calculation of extended quantity. 1 = The system includes yield in the calculation of extended quantity.
10. Requested Quantity ____________ 11. Unit of Measure as Input ____________
Printing a Multilevel Bill of Material
1���#���5�"��"��5�2��"��#�������@> ��$A��������2� #"�:��� �8" ��+2�#�"� ����#�
5"�#�#���2� #"� ��� �8" ��+�2�#�"� ����#�#����"���� �#��� ��� ��+���������#+�����"#���
Processing Options for Multi level Bill of Material
Display
1. Inquiry Mode ____________
Blank = The system displays the information in multilevel indented format. 1 = The system displays the information in single level format. 2 = The system displays the information in multilevel format. 3 = The system displays the information in multilevel indented format.
Shop Floor Management
11–46 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
2. As of Date ____________
Blank = The system uses the current date.
3. Type Bill of Material ____________
Blank = The system uses type ’M’.
4. Display Sequence ____________
Blank = The system sequences the information by component line number. 1 = The system sequences the information by component line number. 2 = The system sequences the information by operation sequence number.
1. Detail Line ____________
Blank = The system prints only one line of detail. 1 = The system prints a second line of detail for items appearing on the report.
2. Component Locators ____________
Blank = The system does not print component locations. 1 = The system prints component locations.
3. Parent Item Detail Line ____________
Blank = The system does not print a line of detail for the parent item. 1 = The system prints a line of detail for the parent item.
Process
1. Phantom Items ____________
Blank = The system excludes phantom items from the report. 1 = The system includes phantom items in the report.
2. Process Items ____________
Blank = The system excludes process items from the report. 1 = The system includes process items in the report.
Working with Bills of Material
11–47OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
3. Subassemblies ____________
Blank = The system excludes subassemblies from the report. 1 = The system includes subassemblies in the report.
4. Text Lines ____________
Blank = The system excludes text lines from the report. 1 = The system includes text lines in the report.
5. Consolidate Component Items ____________
Blank = The system shows individual occurrences of duplicate components in the report. 1 = The system consolidates duplicate components in the report.
6. Purchased Item ____________
Blank = The system explodes to the next level of purchased item. 1 = The system does not explode to the next level of purchased item.
7. Shrinkage ____________
Blank = The system excludes shrink from the calculation of requested quantity. 1 = The system includes shrink in the calculation of requested quantity.
8. Scrap ____________
Blank = The system excludes scrap from the calculation of extended quantity. 1 = The system includes scrap in the calculation of extended quantity.
9. Yield ____________
Blank = The system excludes yield from the calculation of extended quantity. 1 = The system includes yield in the calculation of extended quantity.
10. Requested Quantity ____________ 11. Unit of Measure as Input ____________
Shop Floor Management
11–48 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Printing Where Used Information
1���#���5�"��"��5�2��"��#�������@> ��$A�������������7���-#������#�
5"�#�#��������7���-#������#�#����"���#�������#����. "��#��#����#�"������"+"����������#�
Processing Options for Where Used Item
Format Option
1. Select the Mode or Style of report to be created: 1 = Single Level; 2 = Multi- Level; 3=Multi-Level Indented
Mode of Report ____________
2. Enter a ’1’ to print a second line of detail on the report. If left blank, only one line of detail will be printed.
Print Line of Detail ____________
Interoperability
Shop Floor Management
11–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
12–1OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Interoperability
���+� �������#���"�+���#"����F�"����#��+������#��"���������"����#"�����������#�+����"++���#��+#������������������"���-�#�����." "#��.�#������"++���#������#�"�*���#������+� ��"�� ����#"��#�����#��"��� �#"����1� �"�#�����." "#��.�#������"++���#��#����� #�"���+ ����+���#��.�#�����#����"++���#������#�#��#�"���� ��#��#��������������� ��-�#�����." "#��+���#"������"������"�#�+����#��#�+��" "#�#��<�����"���#����#"����.�#��"�.�����������#.�������"#���<#��� ��#����
�<#��� ��#���������#��#��#���"�#�+����#�. ����"#����"�������<#��� ���������"���+ �#�+" ������#���-�.�����1 �#�1" �������"����������������"�����#��"�����". ��+�����+��"���#��+���#������#����F�"����#�+�#���"�#�+����#�. ���9��������#����#"��������@��.�#��������A�#��#�� "��#��#�����#�������#���� "����#��#��#����������������� "��#"���#�. ������������#"���������#��#������ �������*����#���.��#�����"��� "����#��
9���������"�F�"��+���#"���#��"�#���#"�� ����"���#���"��� "����#��+�����#��������#�������#���#����#"�����������"���9�������#�#�"��������+#������������
9����#�������"�����#"���#�����"+��#���#����#"���#����+��#�����#.����#����#"���������#������#�����#��.�"���+���#"���+��#���#�����+#����#"�������#����������+�#���#����#"��������� ����"#�"��#���"�#�+����#�. �+�����"����<#��� ��#������������"#�
9������#��������+���#"���#���������.� �#�����������������#��+��"�#�+����#�. ���9����#���"������++"�"��#����������*����#����#�. ����� �����". ��
-�#�����." "#�����"#��+�#���+� ��"���#�*3
� �����#"���+ �#�+" ��#��#���"�#�+����#�. �
� )���"�"���#����#"���+����<#��� ��#��
� )��"��"���������""���"�.�����#����#"��
� ����"���#����#"���#���<#��� ��#��
Shop Floor Management
12–2 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Interoperability Programs
����"�#�����." "#��������+��#��������1 ���2��������#��#�������+� ��3
��������/����� ���
������ �$+>3&&1/(
� -�.�����8��*+ ���1 �#�1" �������"��� -�.��������� �#"���1 �#�1" �������"��� -�.�����-���1 �#�1" �������"��� -�.�������*�����1 �#�1" �������"��
������������ �����
������
� -�.�����?�������E���#"#��5�����@) $$��Q$-A� -�.�����-����#���-���5�����@) $$$ Q$-A� -�.��������� �#"���5�����@) $$$4Q$-A� -�.����������8��*+ ���5�����@) $$� Q$-A� -�.�������*�����5�����@)4��$Q$-A
���������� ����
������
� -�.�����?�������E���#"#��-�F�"��@5 $$��Q$A� -�.�����-����#���-���-�F�"��@5 $$$Q$A� -�.��������� �#"���-�F�"��@54��$Q$A� -�.����������8��*+ ���-�F�"��@5 $$�Q$A� -�.�������*�����-�F�"��@54��$Q$A
������������ � -�.�����?�������E���#"#��5����@) $$��Q$A� -�.�����-����#���-���5����@) $$$Q$5A� -�.��������� �#"���5����@)4��$Q$A� -�.����������8��*+ ���5����@) $$�Q$5A� -�#�����." "#����*�����5����@)4��$Q$5A
2��������@A�������
������
� ��#.�������*������<#��#"���@)4��$$IA� ��#.���������#"����#�#���<#��#"���@)4��$Q�IA� -#���8� ������<#��#"���@) $�9B��A
12–3OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Converting Flat Files to the Interface Tables
�<#��� ��#��������������"�#���+���#����#��������#��#��#���"�#�����." "#�"�#�+����#�. ���������#����"�#����#��#�����#��"����+ �#�+" ���-+��������#�"��#�����#����#��������#�#���+ �#�+" ��#��#���"�#�+����#�. ��
9��������#�������"�����#"���#��#�#�#���#����#"�������������#�������"������� �#������+� ��
�����#"���+ �#�+" ��#��#���"�#�+����#�. �����"#��+�#���+� ��"���#�*3
� ��##"������#���+ �#�+" ����;�+�����
� )���"���#��������"��������
Before You Begin
� �����#��#�#���+ �#�+" ��"��������;�� "�"#���(��--�#�<#�+" ��#�������#�������"����+���������� ������#��
� �����#��#�#�����#�����+���#��#������"+"���+���#������#������ ����������&���& ��� ���'�����������5�����"��#�������������������'������� �����������+������ ���+��"�+���#"����.��#����+�������F�"����#�
Setting Up the Flat File Cross-Reference
1���#��������1 ���2��������#�-�#�����." "#�������@> $ $$A��������1 �#1" ����;)�+������
8�+����������������#���+ �#�+" ���������#����"�������;�+������+���#��+ �#�+" ��+"� ��#��#���"�#�+����#�. ��+"� ��
See Also
� #������ ����������&���& ��� ���'�����������5�����"��#�������������������'������� �����������+������ ���+��"�+���#"����.��#�#�"��������"�����*�#�������"��"�#�����." "#�
Shop Floor Management
12–4 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Running the Conversion Program
1���#��������1 ���2��������#�-�#�����." "#�������@> $ $$A��������#����� "��. ��-�.�����II�1 �#�1" �������"���������II�"�#��������#��#�#�������"������� �#���������-�.��������� �#"���1 �#�1" �������"���
����-�.�����1 �#�1" �������"��������������#�#���+ �#�+" ��#��#���"�#�+���#�. ���-+������#�#���� �#�������"�����#"����#����#���#�#�#���#����#"�������+� ��"���������+� ������"���
Processing Options for Inbound Flat File Conversion
Transaction
1. Enter the transaction to ____________ process.
Separators
1. Enter the field delimiter. ____________ 2. Enter the text qualifier. ____________
Process
1. Enter the inbound processor to ____________ run after successful completion of the conversion. 2. Enter the version for the ____________ inbound processor. If left blank, XJDE0001 will be used.
See Also
� ,��� � ��5������� �������'-�������������+��"�+���#"����.��#�#��#����#"�������������
12–5OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Receiving Transactions from External Systems
1���#��������1 ���2��������#�-�#�����." "#�������@> $ $$A������������+�#���+� ��"��3�
� -�.�������*�����5����
� -�.�����?�������E���#"#��5����
� -�.�����-����#���-���5����
� -�.��������� �#"���5����
� -�.����������8��*+ ���5����
���������<#��� ��#�������"�.�����#����#"����#����#���#���#�����#�"��"�#�+����#�. ��������#�. �����#�"������"#���#����#"����9�����#�#������#��������"�#��#����#"��������#����"#�#���#����#"�����������#��#����� "��#"���#�. ���1���<��� ���"+��������"���#����#"���"��#���1 $$��Q$"�#�+����#�. ����������#���-�.�����?�������E���#"#��5�����@5 $$��Q$-A#������#��#�����*������"��������#"���#�. ��@1 $$��A�
9���B�������������#���-�.�����1 �#�1" �������"�������������"#����� �#�����+� ���#����#�����#���#"�� ��#�#�#���#����#"���������"+�����"+"���"��#�������"�����#"���+��#��������"���
���.�����"����"��#���"�#�+����#�. �����#��+�������<#��� ��#�����#���+���#��#����"�"����+"� ���F�"����#����"+"���+��#���"�#�+����#�. ��
����#����#"����������+���#���+� ��"��3
� =� "��#��#�����#��"��#���"�#�+����#�. ��@+���<��� ���1 $$��Q$A�#������#��#�#�����#��"�����#��������+���#��#���+���#���+"����+��#�������1 ���2��������#��#��
� 7���#��#������"�#������ "��#"���#�. ��@+���<��� ���1 $$��A��"#��� "��#�����#�
� 5�����������#�#��#� "#�"��� "��#����#"����������������#"��������+�������"��� "��#����#"���#��#������ �������*����#�
� 2�*�"��#���"�#�+����#�. ��#����#����#"���#��#��������+� �����#���#��#������ "��#"���#�. �
-+�#������#�"��"��#�����������#������ �������*����#��������+��#�����*+ ���2��������#������@>��A�������"���#���������"��#�����������#�����������#������"�#���"�F�"��+���#"���#����"���������"��#��#����#"������������#���#����#"��������
Shop Floor Management
12–6 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
8�+���������������+�#���"�.�����#����#"�������������"+��#��������"�#��� ���+������"���"��#�������"�����#"���
See Also
� ,�� �� �����,�� � ���������5������� ����+������"�+���#"����.��#�"���#���-�F�"��+���#"��
Processing Options for Inbound Hours and Quantity Processor
Versions
1. Enter the version for P311221 ____________ Hours and Quantities to be called. If left blank ZJDE0001 will be used
Printing
1. Enter ’1’ to print ____________ unsuccessfully processed records only. If left blank, all records will be printed.
Processing Options for Inbound Inventory Issues Processor
Versions
1. Enter the Version of Work ____________ Order Inventory Issues (P31113) to be called. If left blank “ZJDE0001’ will be used.
Processing Options for Inbound Completion Processor
Versions
1. Enter the version of Inventory ____________ Completions (P31114). If left blank ZJDE0001 wil be used.
Process
1. Enter ’1’ to print only the ____________ records with errors
Receiving Transactions from External Systems
12–7OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Inbound Super Backflush Processor
Data Edits
Enter the Version of Work Order ____________ Super Backflush (P31123). If left blank ZJDE0001 will be used.
Printing
1. Enter ’1’ to print ____________ unsuccessfully processed records only. If left blank, all records will be printed.
Shop Floor Management
12–8 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
12–9OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Reviewing and Revising Inbound Transactions
)���"��������+�#���#����#"����������������#���-�.�������*����-�F�"����+#���"���#"+"������������"�.�����#����#"���#��#����#�"��"��� "�#����#"����1���<��� �������*������"��#���������"��� "��"#������.���-�#��#������#��������������#�����#��#���*�����#��#�����*�����2�#�#�. ��@14��$A��-�#�����#�������������������������#��#������ ������*����#���"��"��#"���#���#����#"������.��+��#���#����#"���"�����
7��#���"�F�"�������� ��#"���#����"���������"��"�.�����#����#"����7�#���"�F�"�������� ��#"���#������������������� �#��#����#"���#��#����#�"�������������#���#����#"�����������"������#"����#����*������#"����������#���#����#"����������#" �#�������������"#���#����
����� ��#"���+��#��������1 ���2��������#�"�F�"������������+� ��3
� -�.�������*�����-�F�"�
� -�.�����?�������E���#"#��-�F�"�
� -�.�����-����#���-���-�F�"�
� -�.��������� �#"���-�F�"�
� -�.����������8��*+ ���-�F�"�
����#���#��#�+� �������� ������<��� ���+�#��"�� �������#��#������"��#��+���#����"�������"��"�.�����#����#"���
Shop Floor Management
12–10 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
������������������ �������������� �����
1���#��������1 ���2��������#�-�#�����." "#�������@> $ $$A�������-�.�����?�������E���#"#��-�F�"��
$� �����*��"#��-�.����������#"���)�����+��1 $$��Q$������ �#��#��+� ��"���+"� ������� "�*�1"��3
� 7��-�
� 8�#���B��.�
� �����#"���B��.�
�� ������#���#����#"���#����"���������"��#������������� "�*��� ��#�
� ��������#"���)�����)��""���+��1 $$��Q$����"���������"���������������#����� "�*��G�
4� (+#����������#�#������"���#"+"���.��#���-�.�������*����5���������#���#����#"�����������"��
����,��� � ��5������� �������'-��������������
6� -+�#����#���"���#"+"���#�������+� ���#���$�'�4���#" �������#����#"������������
%���� @A���������
7��-� 1���� ���#���-82;��+"���������+" ��
1������� ���#���"���#"+"��#"��������+���������+" ��
Reviewing and Revising Inbound Transactions
12–11OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
%���� @A���������
8�#���B��.� �������.��#��#�#���#���"##���"���#��#���.�#���
��"���.�#�������"����#����#����"���������.�#��
���.��#��#��������������#����#"���+����������#�
@��A�.�#������.��"#�+"���
�����#"���B��.� �������.��#��#����� ��#��"����#��-�#��������@��-A
#���"##���"���#����#����#"����-�������;��-
���"�����#�����������"����������.��#��#�"
����"��+� �#������#��"���#"+����#����#"����"#�"����.�#���
-#�����.��#�����������������������������#����.��
See Also
� ���������� ��'������������;� �����,�� � ��"��#�������������������'������� �����������+������ ���+��"�+���#"����.��#���"��"��������""�����#��#����#"���+��"�.����������#���#"�"#�
� %��� ��� �+��������"��#�����%����&������ ���� ���+�����"�+���#"����.��#�#������ �������*����#�
Shop Floor Management
12–12 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Inbound Work Order Inquiry
Display
1. Default View Mode. If left ____________ blank, default is ’1’.
’1’ – View Unprocessed Records ’2’ – View Records Processed Successfully ’3’ – View Records Processed Unsuccessfully
2. Enter the Direction Indicator ____________ value. (’1’ for Inbound Records, ’2’ for Outbound Records). If left blank ’2’ will be used. 3. Enter the value for the screen ____________ to be displayed. (’1’ for Work Order Revisions, ’2’ for Completion Revisions). If left blank, ’1’ will be used.
Defaults
1. Enter the Transaction Type for ____________ new Work Order Header Transactions. If left blank, “JDEWO” will be used. 2. Enter the Transaction Type for ____________ new Work Order Parts List Transactions. If left blank, “JDEPL” will be used 3. Enter the Transaction Type for ____________ new Work Order Routings Transactions. If left blank, “JDERTG” will be used
Process 1
1. Name of Inbound Subsystem UBE ____________ to process Inbound transactions.
If left blank, default is ’R31114Z1I’.
2. Version of Inbound UBE. Default ____________ is ’XJDE0002’.
Reviewing and Revising Inbound Transactions
12–13OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Inbound Hours and Quantity Inquiry
Display
1. Default View Mode. If left ____________ blank, default is ’1’.
’1’ – View Unprocessed Records. ’2’ - View Records Processed Successfully. ’3’ – View Records Processed Unsuccessfully.
2. Enter the Direction Indicator ____________ value. (’1’ for Inbound Records, ’2’ for Outbound Records). If left blank, ’1’ will be used.
Defaults
1. Enter the Transaction Type for ____________ new Work Order Header Transactions. If left blank, “JDEHQ” will be used.
Process
1. Name of Inbound Subsystem UBE ____________ to call to process Inbound transactions.
If left blank, default is ’R31122Z1I’
2. Version of Inbound UBE to call. ____________ Default is ’XJDE0002’.
Processing Options for Inbound Inventory Issues Inquiry
Display
1. Default View Mode. If left ____________ blank, default is ’1’.
’1’ – View Unprocessed Records. ’2’ - View Records Processed Successfully. ’3’ – View Records Processed Unsuccessfully
2. Enter the Direction Indicator ____________ value. (’1’ for Inbound Records, ’2’ for Outbound Records). If left blank, ’1’ will be used.
Defaults
1. Enter the Transaction Type for ____________ new Work Order Header Transactions. If left blank, “JDEII” will be used.
Shop Floor Management
12–14 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Process
1. Name of Inbound Subsystem UBE ____________ to call to process Inbound transactions. If left blank, default is ’R31113Z1I’. 2. Version of Inbound UBE to call. ____________ Default is ’XJDE0002’.
Processing Options for Inbound Completion Inquiry
Display
1. Default View Mode. If left ____________ blank, default is ’1’.
’1’ – View Unprocessed Records ’2’ – View Records Processed Successfully ’3’ – View Records Processed Unsuccessfully
2. Enter the Direction Indicator ____________ value. (’1’ for Inbound Records, ’2’ for Outbound Records). If left blank ’2’ will be used. 3. Enter the value for the screen ____________ to be displayed. (’1’ for Work Order Revisions, ’2’ for Completion Revisions). If left blank, ’1’ will be used.
Defaults
1. Enter the Transaction Type for ____________ new Work Order Header Transactions. If left blank, “JDEWO” will be used. 2. Enter the Transaction Type for ____________ new Work Order Parts List Transactions. If left blank, “JDEPL” will be used 3. Enter the Transaction Type for ____________ new Work Order Routings Transactions. If left blank, “JDERTG” will be used
Process 1
1. Name of Inbound Subsystem UBE ____________ to process Inbound transactions.
If left blank, default is ’R31114Z1I’.
2. Version of Inbound UBE. Default ____________ is ’XJDE0002’.
Reviewing and Revising Inbound Transactions
12–15OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Processing Options for Inbound Super Backflush Inquiry
Display
1. Default View Mode. If left ____________ blank, default is ’1’.
’1’ – View Unprocessed Record. ’2’ - View Records Processed Successfully. ’3’ – View Records Processed Unsuccessfully.
Enter the Direction Indicator ____________ value. (’1’ for Inbound Records, ’2’ for Outbound Records). If left blank ’1’ will be used.
Defaults
1. Enter the Transaction Type for ____________ new Work Order Header Transactions. If left blank, “JDESBF” will be used.
Process
1. Name of Inbound Subsystem UBE ____________ to call to process Inbound transactions. If left blank, default is ’R31123Z1I’. 2. Version of Inbound UBE to call. ____________ Default is ’ZJDE0001’.
Shop Floor Management
12–16 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
12–17OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
Sending Transactions to External Systems
9����"��#������#������#�����#����#���#����#"���#��#��������#����������"��#��������1 ���2��������#��#����1���<��� ���"+���������"H�#"���������;�� ������"������"���������������"�#�����." "#��#����#"���#������#�#�����#�.�������.��#�������"������"���
������+�� #���#.�����#����#"���"���������+�����#��#����#"����+#��������#�������������"#�@�������� ����A���"#��"�#�����." "#������������ �������������+������#����#"�����"#����.�+���������������"#�@�������� ����A����#"����������"���.�+���"������F�"�����"#"��� �����"���#"���������#� �#���#�����+�"�����������#�������"�����#"���"��#������ "��#"��������#��#����#��#����#"���
9�����������#����#"���#������<#��� ��#���+���#���+� ��"���������"�#��������1 ���2��������#��#��3
� ��#�0����������
� ��#�0�������)�#�������� �
� ����5���"��
� -����#���-��
� ?�������E���#"#"��7���#�
� ���� �#"��
������#����#.�����#����#"�������"+��#��������"�#��#����#"���#����"��#��� �#�������"�����#"���������#���� ������������+�#���#����#"���"��#��"�#�+����#�. ��+��#��#�#�����+�#����#"����1���<��� ����������������#�0������������"#��#���"�#�����." "#������"�����#"���#���������#���#���� ������������+�����#�����*�������#��"��#���14��$Q$�"�#�+����#�. ��������#��"�#�������" �. ��+������<#��� ��#���#�����
�����#������#��#�����#.�����#����#"���"����-�+���#���<#��� ��#�����������#���#����#"����"���#��������-�����"����"�� ��"����<#��#"���
Before You Begin
� ��+"���#�����#���<��#����#� �+��#���#�����+���#.�����#����#"��������#��������#���<��#����#� �#����#��"���#���.�#����������.�"���������#��#�#�"����#"����� ��+�����"������"��#����#"���
Shop Floor Management
12–18 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
See Also
� '����%�������(�������+��"�+���#"����.��#���#�"���������
� '���� ��,�����+�������+��"�+���#"����.��#���#�"������#������� �
� "������ ��%�����������,�����+�������+��"�+���#"����.��#��������"��
� ���� ������� ���+��"�+���#"����.��#�"����#���"��
� � ��� ��(�������9���� � ���+��"�+���#"����.��#�����"����������F���#"#"�
� %��� ��� �+#�� ��� ����+��"�+���#"����.��#����� �#"�������*�������#������� �
Appendices
Shop Floor Management
12–20 OneWorld Xe (09/00)To access English documentation updates, see
https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf
OneWorld Xe (09/00) A–1
Appendix A: Leadtimes
��#��"�"��� ���#"���"�������#"� ���#��+���������+��#�"���������� "��������1�����������#�#��#������������������+��#��������������#���#"��� ���.�#��������������������#�#�"#�����������������"�����+"�"��"#����������#�+��#��� ����������#��#"��#������� ���+��#����<#��#"���@ ���#"��A"������� ���"���
:���#"������"#��+�#���+� ��"���#��"�3
� :���#"���������#
� ��*�����#�#���#�
� ����#"���#�#�����������#�
� ��� ���"�������#"��
� ��� ���"��������������#�����#"��
� :���#"����� �� �#"��
���� �#"��� ���#"���"�#���#�#� ������#��+�#"���#��#�"��F�"���#���������������#�����������1 ���2��������#��#������#����F��#�����#���+�#�����������.�������#�����#��������#����+"���#��� ��� � ���#"���@ ���#"�������"#A�+��#��������#���� �� �#��#��������"�#������#�#���#��
2����+��#������"�+ �����������������D� ���#"����� "����"�� ��"���#��+� ��"��3�
� 2���+��#�"������"�����#�@���. �;#�;�������*�;#�;���A
� 1"<�������"�. ��F���#"#"�
� ��"� ������ �������#"��
� 1"<�������"�. �� ���#"��
� B��.���+��"+#���������#�
� 1��#�"���.���++"�"����
� 5�#��#"��
���#������������������+"<�������"�. �� ���#"����������������#��������������"#��#���*�����F���#"#"��+��������+��#����"#����-+�������*����F���#"#"������"��"+"���# ���������� �������"�. �� ���#"����(�"��"+"���#
Shop Floor Management
OneWorld XE (09/00)A–2
��"�#"������ ��.�����������#�#��#��F�"�������� �� ���#"����-#����"#���#� ���#"������ ������� ����+ ��#��#"���#����"#����"#�� ���� ���#"���9������"+�����#���#�����+"<�������"�. �� ���#"������#���5 ��#�2���+��#�"����#��+���+��-#���8�����
1����������+��#���������#��#����#����� �� �#��+���#�����+� ���#"����+� ��3�
.������������� :��� � ���#"���"�#������.���+���*�����F�"���#�
���� �#��#��������#��+#��� �"#���������" �. ��
����!����!���� ���+������"�+���#"�������#��
���"�#����� �� �#"���
�������������������� 2���+��#�"��� ���#"���"�#���#�#� ����.���+���*���
�F�"���#������ �#���������#��+���"#� ���#; ���
��������#�#��#���+"�� �"#�������"���#��#�� ��������
"#������"�������
�������������� ��!���� ���+������"�+���#"������
#������"�#����� �� �#"���
/���������������� ���� �#"��� ���#"���"�#������.���+���*�����F�"��
#����F�"��"#����������� �#���������#��+���"#
���#; ��� ���������#�#��#���+"�� �"#����-���#�������
"#�"�#��� ��� � ���#"���+���������#��� ��#��� ����#
���� �#"��� ���#"����+������+�"#���������#�
����#������ ��!���� ���+������"�+���#"�������#��
���"�#����� �� �#"���
���������������� 5����"#� ���#"���"�#�������+�#������#"��������+"���
.��#����"��� ���������+��#�����*����#���+��#����.�
#�����#"���#"���.�"����������#���#��#��� ���#"�����
��"#�
����5��7�"#�:���#"���+������"�+���#"�������#��
���"�#����� �� �#"���
���������1 ���2��������#��#������#���+� ��"���+��#��"��"#��� �� �#"���+� ���#"��3�
� ��"� ������ �������#"��
� 1"<�������"�. �� ���#"���"��"��#�
� )��#"��� �.����#����F��������������������"���������
� 5"��� ���������+������*����#�
OneWorld Xe (09/00) A–3
� B��.���+���� �����������"��������*����#�
� ?��������*����
����� �� �#�� ���#"����#����#�������#���+� ��"��3�
� 7��#���"�+���#"���#��#������#����+�������"#������5 ��#�2���+��#�"����#��"��#���-����#���2��������#��#��
� ����"��#��#���"�+���#"����"#����#"���"�#��#"���������*����#�"�+���#"���#��#�������#��"��#���5����#���#��2��������#��#��
� ��#��"��� ���#"���+��� �����#�������������#�"#��
(#�������"�#�"������� ���"������������ "������������������������ ���#"���� �������� ��#������2���+��#�"�����#��
9����������+"<�������"�. �� ���#"���+��"����"��#�������#����.#��#+"<��� ���#"����"��# ��+���#����F��#�����#�����#�����*��F��#�#���� �� �#�#���#�#���#���+������#"����1"<��� ���#"������"��#����������� ���+�#��F���#"#�����������?���������"�. �� ���#"�����/�#������"���#��#���F���#"#���������
Shop Floor Management
OneWorld XE (09/00)A–4
Example: Leadtime Calculation Worksheet
����+� ��"�������"��" �#�#��#����"++���#�#�����+� ���#"���#��#��������+��#��"�#���"++���#�"#��� ��� ��"�� ��"��������#�"� �����+"�"���������#�
Leadtime Calculation Worksheet
LLT = 6 Days
LT (Parent)
MLT = 7 DaysCLT = 14 Days
LT/UNIT = 20.86 HoursSETUP = 4 HoursQUEUE = 22 Hours
LT1 (Raw Material)
LLT = 5MLT = 0CLT = 5
LT2 (Raw Material)
LLT = 5MLT = 0CLT = 5
LT1 (Sub–Assy.)
LLT = 1MLT = 1CLT = 8
LT11 (Raw Material)
LLT = 7MLT = 7
LT/Unit = 6.67 Hours
LT12 (Raw Material)
LLT = 5MLT = 5
LLT = Level LeadtimeMLT = Manufactured LeadtimeCLT = Cumulative Leadtime
Leadtime Concepts
����+� ��"���#�. ���<� �"��"���#��#� ���#"���#�������������#3
����������� �������.���+�����"��������F�"���#���������#��
�����#�+���#���#"���.�"������
.��������� �������.���+� �.�������F�"���#���������#��
�����#�+���#���#"���.�"������
5��������� �������.���+������F�"���#������������"����#�
������������"+"��"#�������� ���+�F���#"#��
OneWorld Xe (09/00) A–5
��������� �������.���+�����#��#�������+��#�"�����*�����"
"��#��"#�+���#������� �#"����+���������#"���#��#��
.��"��"����+�#�����<#�
=��������� �������.���+�����#��#���/�.���"#��#�����*����#�
.�+����#�������*�"���+��������#���/�.�
������ ������������
����
����#�#� �F������������������"�#�������+�#�������
��������#���F���������
������ � ���� (������+"���������@ �0�8A�#��#�"��"��#����������"��
�� �.����������<�����+���������#���"���.�"
�����"���#"+��#���#"���.�"����#��#��.������+�
����"����� �.��������#����+�������#���"��#��
��#"���"�#��#"����+���<��� ����6��������$����
�"�����9�����"�#�"��#���#"���.�"������"���"���8�"
�����
+� ��������� �����#������" �. �������#��+������"#��"������*����#�
+��#������#��"��#����� ������1�� ���#"�����������
#����#����� �� �#��#�������#"���#�#�����������#���"#
���#������" �. ������#���� �� �#��#�������#"���#�#
��#���9�����"�#�"��#�����������"#�"����*����#�
)������7�"#�
������������� ��#��"������#�������*����#��"� �.�;"�#��"����
����"��;"�#��"���������"��� ���������� ����#��"��
���#���#����#������#������.���+���� �������#��
���.���+�����"���#����#��"���#�����" ����������"#
"��#���)������7�"#�#�. ���9�����"�#�"��#����"��� ���
�����"����*����#��)��""����1���� �� �#"��� ���#"���
#���+� ��"����� ���+�����"��� �������������� "�3
� :�M���� �.������ 2�M�����"��� �.������ 8�M���������#������� ��M�����"��������#������
����� ������� (���#���������+�������� "���1����������������#
�������"+��#��� ��� � ���#"������"���"��F�� �#��#��
���� �#"��� ���#"����8����+�� #��#�������+��#�"��
���#"���� ���#"��������"#��#�#� �F������������������
�����#���#"���+������������#����H���
/���������������D �����#��� ���#��������#"���������#���*��������
#��������#�"� ����� �.��������#������ �#����/�.�
#����;����� 1��#������"�������������#�
Shop Floor Management
OneWorld XE (09/00)A–6
@������� 1��#�� �.����#"�����++"�"���������#"���#��#���#�����
��#"������� ���#"���������++"�"�����"� ��#����$��N�
���#�"��%6N� �.��"�%6N��++"�"��#�
Work Order Start Dates
�����#������#��� ��� � ���#"����� ���#"��������"#�+�����"#�����+"������#���2���+��#�"�����#��+���#���� �� �#��#���#�#���#���+�����*�����.������#������D�������#���
�#�#���#��+����*���������� �� �#����"��������+�#���+� ��"��3
� 1"<��� ���#"��
� =�"�. �� ���#"��
Fixed Leadtime
��������"#��������+"<��� ���#"����#����#������#���"#��D� ��� � ���#"��
�� ���"��.��*����� "���#���� �� �#��#�����*�����#�#���#��
1���<��� ���#����#��������#����� ����������+�������#�$�$��"#����F��#���������#���+�$�0$60�������� ��� � ���#"���"� �����+��#�"������#���#����#����� �� �#��#���#�#���#��.������#"���.��*� ���*"����������#������+ ����� �����+���@.�#���#�"�� ��"��A�#����F��#�����#��������#���"���#���������#�#���#���+�$�0$�0����
10/12 10/13 10/14 10/15
Fixed Leadtime
Start Date Due DateLevel LT 3 days
Variable Leadtime
��������"#����������"�. �� ���#"����#����#������#���+� ��"����� �� �#"��#����#��"���#��� ���#"������3�
(Leadtime per unit x order quantity / TBC*) + setup + total queue/move
Work hours per day
* The system reads the Time Basis Code (TBC) from the Item Branch table(F4102).
OneWorld Xe (09/00) A–7
1���<��� ���#����#��"���#���#�#���#���#����#�������#�.��*�#��� ���#"������+���#���������#���+�� ����������������#���.��*����� ��#��������#���$�0$6��������#����#��"���#���#�#���#���+�$�0$ �
(32 x 1000/ 10,000) + 1 + 9) / 8(3.2 + 10) / 8 = 2 days
����+� ��"���#�. ������#����� ���#��#��������"��#�"��<��� �3
������#� $�0$6
:���#"��������"# �����
����F���#"#� $���
��#�� $����
��#� �F����0���� %����
��*����������� �����
9���B�:���#"��������"#�������#��������"H��"��#����� �� �#"����+� ���#"���+����"#����#��� �.�;.������*����#���?������� ���#"��������"#��������#�����.���+���� �����"��#�����*����#��������� �� �#"��� ���#"���
Operation Start and Due Dates
�����#����� �� �#��#�������#"���#�#�����������#���"#��#�������������.��+������������#"����
����#"���#�#�����������#������� �� �#����"��������+�#���+� ��"��3
� 1"<��� ���#"��
� =�"�. �� ���#"��
Fixed Leadtime
�����#����� �� �#��#�������#"�������+����+"<��� ���#"����"���#��
+� ��"���"�+���#"��3�
� :��� � ���#"��
� ?��������*����
� B��.���+���� ������������"��
� B��.���+�����#"��
9�����#������ ��#��������������#"��������"���#��#�����������"#�"#�"��#�����#"�� ��� � ���#"������"������#��#�#���#�#���#���+�#���+"#����#"���"�#���������#���#�#���#���+�#�����*�����������#���/�.������#����"++���#���*����#��"��#������������#����#����������#�����������"#
Shop Floor Management
OneWorld XE (09/00)A–8
���" �. ��.��#��������#�����+�#�����*��������"�"���������#���������#�����������"#����#���������#���+�#�����*������-�#�����"#������#��#�#������������� �#����#�#��������+�#������"�������
1�����������#"����#����#���#��������� ��#�"��������#"���"�#��#�������"�#����*����#���.�������#������" �. ������+���#�����*����#�)������7�"#�#�. ��@1 ��!A�������#�������� ��#���������#���+�#��� �#����#"������#�������.�+���#�����*�����������#��
Calculation
�����#������#���+� ��"���+��� ��#���� �� �#���������#"����������#"��3
leadtime level days x work hours per day* x employees or machine
number of operation sequences (blank operation sequence codes only)= average timeper operation
* Work hours per day are retrieved from the Job Shop Manufacturing Constants table (F3009).
����+� ��"���#�. ������#����� ���#��#��������"��#�"��� �� �#"��3
��*�����������#� �60�$0%�
(������#"����������#"�� �6����
����#"���"��#�����#"��"�#��#"��
�54� ������;��4 ����40 ��#�#�40�!
�5 � ������;$�$ ����40�!�#�#�40�4
�5�� ������;��4 ����40�4�#�#�40�$
�5$� ������;$�$ ����40�$�#�#�40$!
���)������7�"#����;��4 �
���)������7�"#����;$�$ �
Variable Leadtime
�����#��"�����"�. �� ���#"����#����#�������� ��#�����#�� �����+���#����*�������#"���"�#��#"��������"���#��#���������������"#�� ��+�+"<��� ���#"����
�����#������#����"��� ���������#����#��"���#�������#����������������#������� "���#��#�����������"#�#�. ���"�" ��#��+"<��� ���#"���������#����� "��F�����#"���+���#�����*�������#"���"�#��#"����#�#���.��"��"����+�������#"����������� "�������#"����#�#��������+��������#"���
�����#���� ��+��#������ �#"����"� �������#���#" "H�#"���������++"�"�����"��#���� �� �#"���
OneWorld Xe (09/00) A–9
Overlapping Operations
������#��������#�������� ���#"���"�#����� �������#"������� ���"������#"������#�������������#"���"������#"���"�#��#"���#��#�����#�#������#"�������������#��+���� ���"�#��������#��+�#"���#��#�#��������#"����������������# ���9���������+"����#����#���"�#�#�������������#"������.��"��.�+���#���+"#�����#"���"����� �#���8�������+��#��������������F����#"����#�����#�� ���� ���"�����#"����"��#�.�� ��#����#��������#��+���� ��#��#������������+"�����
-��#���+� ��"����<��� �������#"���8�����������#��+���� ����+���N����"�����#��#�����#"���8�����.��"���������N��+�����#"���(����"��#��.�+"�"����������������#"���(�"���N����� �#�������#"���(�����8����.�#���#"�����#������� ���
Move
Operation Ais 20% (run)complete
ÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏÏÏÏ
ÏÏÏÏ
ÌÌÌÌÌÌ
ÌÌÌÌÌÌÌÌÌ
ÌÌÌÌ
Run time for Operation A
80% of overlap (run)
Run time for Operation B
Actual startdate forOperation B
Queue
Setup
Run
-+�#��������#��+���� ���������������#"���#������ �#��#����#��� �#�����#"��"��#�����#"���"�#��#"����#����#���"���������������������#��#����*�����#�#������F��#�����#��"�#�����������#"���
Shop Floor Management
OneWorld XE (09/00)A–10
Overlapping and Concurrent Operations
-+��������#�����+���� ���"����"+"���"��#�����#"���"�#��#"����#�����#"��"�#��#"���+��#�����*�����"�� �������"+"�������#"���#��#���� ����1��<��� ��������� ��������#�����+���N�+���������#"��������#��#�#�����<#����#"�������#�#��������N��+�#������"�������#"���"����� �#������+� ��"���#�. ��" �#�#������#"����"#�������"#���#���� ���"��������#����
��*��������� �#����#� �60�$0%�
:�#�����#"����� �4����
1"#�����#"���$� �4����
)�����������������������*���#�
�����
����#"������ �������� !6N
��������2������ �����2������
����#"���$�
�#�# �40�!0%� �40�!0%�
���� �#� �40�%0%� �40�%0%�
����#"�����
�#�# �40 �0%� �40�!0%�
���� �#� �60��0%� �40 �0%�
7"���#�����#��+���#���#�. ���.�����#����#�����������#������� �#����#���+#������"�������#"���.��!6N��+��4�������$������������#���#������ �� �#��#���#�#���#���"���#������� �.��*����� "���� ���(����� #�����#"���$������������ ��������" �#�*���4�����#������ �#�������+� ��"���"�����" �#�#��#�"�������#3
7��� >*13 >*1< >*1- >*0& :*, :*1
)��������� � � � � � �
�5�$��@�4��A@�"#���#���� ��A
EFFFF FFFFF FFFFG
�5����@�4��A@�"#���#���� ��A
EFFFF FFFFF FFFFG
�5�$��@�"#����� ��A
EFFFF FFFFF FFFFG
�5����@�"#����� ��A
������EF FFFFF FFFFF FFG
OneWorld Xe (09/00) A–11
Leadtime Calculations
������ �� �#"���+���#���:���#"���)� �������������#��#���+� ��"����� ���"#�"��#���5 ��#�2���+��#�"�����#�������3�
� :��� � ���#"���@"+������������+��#�"��� ���#"���F���#"#�A
� 2���+��#�"��� ���#"��
� ���� �#"��� ���#"��
� 5����"#� ���#"��
� ��#� �F�����������������
� ��#������
������+�#������ ���"����".���"����#�" �"��#���+� ��"���#��"��
Level Leadtime
1��������+��#���������#�� ��� � ���#"���"�#������.���+���*�����F�"��#������ �#��#��������#��+#��� �"#���������" �. ���:��� � ���#"���+�����������"#���"�#������.���+��� ����������F�"���+������#�����"���#��"#����+#��#������ "�����"�����������������������+� ��"�������"��������������"��#��������#��� ��� � ���#"���+��������+��#����"#����������������"#��������3
Purchased Item Manufactured ItemSingle-Level
Supplierreceives
order
Manufacturerreceives item
Startproduct
Completeproduct
Shop Floor Management
OneWorld XE (09/00)A–12
Calculation
�����#������#���+� ��"���+��� ��#���� �� �#�� ��� � ���#"��3
{(M or L) / (E or M)} x MLQ( )
TBC* + setup + total queue/move hours
Work hours per day from Constants table
∑
* The system reads the Time Basis Code from the Routing Master file (F3003).
����+� ��"���#�. ������#����� ���#��#��������"��#���+��� �3
2���: 2���"����� �.������.�������#����"��� ��������
:���8 :�.�����
2���� 2���"������
�72 �����+�� �����#"��
�8� �"���.�"�����
2:E 2���+��#�"��� ���#"���F���#"#�
� B��.���+���� �����"��#�����*����#�
2 B��.���+�����"���"��#�����*����#�
1���<��� �3
{(8)/(1)} x 2,000
10,000
{(12)/(1)} x 2,000
10,000
{(12)/(1)} x 2,000
10,000+ 1 + 9
8
(1.6 + 2.4 + 2.4 + 1 + 9) / 8 = 16.4 / 8
+
M
3 days level leadtime
M
OneWorld Xe (09/00) A–13
Manufacturing Leadtime
2���+��#�"��� ���#"���"�#���#�#� ����.���+���*�����F�"���#������ �#��������#��+���"#� ���#; ��� �"#���#��#���+"�� �"#�������"���#��#�� ��������"#������"��������2���+��#�"��� ���#"���"�� ����#���+� ��"��3�
� ���������#"���#"��
� E�����#"��
� ��#���#"��
� )���#"��
� 2����#"��
� -����#"���#"��
� 5�#�����#"��
-�����"#"��������+��#�"��� ���#"���"�#���#�#� ��+�#��� ��� � ���#"���+�����"#��� ��#��� ����#�����+��#�"��� ���#"����+������+�"#���������#�
:���#"���+����������"#��������#�"�� �����"������+��#�"��� ���#"���� �� �#"��������+� ��"�������"���������������"��#��������"�#������+��#�"��� ���#"���+��������+��#����"#��������3
Manufactured ItemMultilevel
Supplierreceives
order
Manufacturerreceives item
Startproduct
Completeproduct
Shop Floor Management
OneWorld XE (09/00)A–14
Calculation
����+� ��"���+ ����"��������"�#����� �� �#"����+�����+��#�"��� ���#"��3
Item FLevel LT = 1
Item GLevel LT = 3
Item ALevel LT = 2
Mfg LT = 2 + 8 = 10
Bold line = Longest manufacturing leadtime of any of the product’s items.
Item BLevel LT = 7
Mfg LT = 7 + 0 = 7
Item DLevel LT = 4
Mfg LT = 4 + 0 = 4
Item ELevel LT = 3
Mfg LT = 3 + 0 = 3
Item CLevel LT = 4
Mfg LT = 4 + 4 = 8
Items A, B, C, D, and E are manufactured items.
Items F and G are purchased items.
OneWorld Xe (09/00) A–15
Cumulative Leadtime
���� �#"��� ���#"���"�#������.���+���*����#��#�����F�"���#����F�"�"#����������� �#���������#��+���"#� ���#; ��� ���������#�#��#���+"�� "#������"���"�#��� ��� � ���#"���+���������#�� ��#��� ����#����� �#"�� ���#"����+������+�"#���������#�
7� "*������+��#�"��� ���#"�������� �#"��� ���#"���"�� ����#��� ���#"���+���������"#����-#�"�� ����.�#��#���#"���#����F�"����������"#�������#��#"���#������ �#��#��������#�
�������� �#"��� ���#"���+������������"#���"�"#� ��� � ���#"��������+� ��"������"���������������"��#��������#������� �#"��� ���#"���+�������+��#����"#�����������������"#��������3
Purchased Item Manufactured ItemSingle-Level
Supplierreceives
order
Manufacturerreceives item
Startproduct
Completeproduct
Shop Floor Management
OneWorld XE (09/00)A–16
Calculation
����+� ��"���+ ����"��������"�#����� �� �#"����+����� �#"��� ���#"��3
Item FLevel LT = 1
Item GLevel LT = 3
Item ALevel LT = 2
Cume LT = 2 + 10 = 12
Item DLevel LT = 4
Cume LT = 4 + 1 = 5
Item CLevel LT = 4
Cume LT = 4 + 6 = 10
Item BLevel LT = 7
Cume LT = 7 + 0 = 7
Item ELevel LT = 3
Cume LT = 3 + 3 = 6
Bold line = Longest manufacturing leadtime of any of the product’s items.
Items A, B, C, D, and E are manufactured items.
Items F and G are purchased items.
OneWorld Xe (09/00) A–17
Per Unit Leadtime
5����"#� ���#"���"�#�������+�#������#"��������+"����.��#����"��� ��������+��#�����*����#���+��#����.��#�����#"���#"���.�"����������#���#��#�� ���#"��������"#�����������"#� ���#"����#��� "��#�#���#��+������� �����"��"#��#"����#���#����#������� �� ����������F���#"#���������������#�� ���#"���� ����������#����#���������#��������"#� ���#"���"������
Calculation
�����#������#���+� ��"���+��� ��#���� �� �#�������"#� ���#"��3
{(M or L) / (E or M)} x TBC 1( )
(8 / 1) x 10,00010,000
(12 / 1) x 10,00010,000
(12 / 1) x 10,00010,000
+
8 + 12 + 12
TBC 2∑
+
32 hours per unit leadtime
1 The system reads the Time Basis Code from the Item Branch table (F4102).2 The system reads the Time Basis Code from the Routing Master table (F3003).
For example:
M
M
9���3������<��� ���.����������#�"�� ����#���+� ��"�����"�. �3
� ���� �#"���9"� �
� 5����#�����+���� ��
� 8�#���E���#"#�������"��
� ��*����#���++"�"���������7#" "H�#"��
����+� ��"���#�. ����+"���#����� �������"��#���+��� �3
2���: 2���"����� �.������.�������#����"��� ��������
:���8 :�.�����
2���� 2���"������
�72 �����+�� �����#"��
�8� �"���.�"�����
Shop Floor Management
OneWorld XE (09/00)A–18
� B��.���+���� �����"��#�����*����#�
2 B��.���+�����"���"����*����#�
Total Queue and Move Hours
E���������"��"��#��#���#"���#��#�������+��#�"�����*�����"�"� ���#�����*���#��.�+����#�������*�.��"���2��������"��"��#��#���#"���#��#������+��#�"�����*�����"����"���+���#������� �#"����+���������#"���#�#���#�#��+�#�����<#�����#"��������� �� �#��#���#�#� �F����������������������#�����������������#"�������#���F��������������#"����
-��#���+� ��"����<��� ���%�"�#���#�#� �F�����������������3
@$�P��A @��P�4A @��P��A M�%�5� �������5�&��������5���
Setup Hours
��#�������"��"��#��#���#"���#��#�"��F�"���#��������#�������"����#���������"+"��"#��������� �� �#��#����#���������"�"���#����#���.��#������.���+��� �����������"���+���������#"��������#��������#����� ���#���#������"��������"#�������"���#���.��*����� "�����#"���.������#����������"#�+��#�����*����#��������#���.�������#�������.���
-��#���+� ��"����<��� ���#����#��������F�� �$3
�5� ��������5�&��������5���
M�&��#������$$
�$
&�
��#����� �����������"��
Index
Shop Floor Management
B73.3.1 (6/99)
B73.3.1 (6/99)
Index
A
(�����#"����+��#����$'$�
(�#�� ���#"������� ����� �.���#����'$�
( ����#���������"�����#"����&'$!
(��. ��"�� �"���� �������"���� '4&
("��"����"� ����.��� '�!
(##���"��
��;0.�;�����#� "#�� '�4
"�#����"�#��"#���� '�6
��#� "#
.������5���"���������� '&�
����"���� '&�
"�#���#"�� ��� '&�
����� ��� '&�
��#"���"�#��#"��
.����������"���� '!&
"�#���#"�� ��� '!&�� '!!
����� ��� '!&
(##���"�������;�����#�����.�;�����#
"#�� '�4
(##���"�������#� "#�� '%
(##���"�������#� "#�"�#���#"�� ��� '&�
(##���"�����;�����#�����.�;�����#�
'$6
(##���"���"�#����"�#��"#���� '�6
(##���"���"�#����"�#��� '$&
(##���"�����#"���"�#��#"���� '$
(##���"�����#"���"�#��#"���"�#���#"�� ��
'!&
(##���"������ ����#�����#��� '&$
(��" �." "#�
"�#���#"������������#��&'$
��"��"����&'$��&'6
B
8��*+ ��"��
���� �#"������*������$�'$���$�'4��
$�'4�
"�"����!'�
8��*������ ��"�������� �#"����$�'�$�
$�'44
8��*����� "��������"���� '$�
8��*����� "�������*������ '$�
8�#���)�#��� ��������"�����#"����$$'�
8" ��+���#�"�
�����"����$$' !��$$'4�
�"#����#� "#��$$'4�
�� #"; ��� �." ��+���#�"� ����#��$$'46
�"�#"����$$'4�
"�� �� ��� �." ����#��$$'4
C
�� �� �#"���� ���#"����('$$
�� �� �#"�����#�#���#��� '$&
�� �������##"��������'$�
�����"#��)�F�"����#�5 ���"���
"�#���#"����$'�
��#������������##"��������'4
�����"��
��#����"�+���#"����&'$6
��*������#�#���$$'&
�����"�����#����"�+���#"����&'$6
�����"���#���#�#���+��#������� ��#�
� �����$$'!
�����"���#���#�#���+���*�����#�
� �����$$'&
� �"��
�#���$$'!
��*������$$'
��;0.�;�����#
�##���"���� '$6
���� �#"������� �������$�'4&
����"#���#
���#"������#��#���"#��6'�&
��+"�"����6'6
.�������������#�"#����6'�$
���#� �����#�����6'%
��"���.��*+ ����6'�
"#��D���#"����6'$6
���#"����6'$%
Shop Floor Management
B73.3.1 (6/99)
��#�����6'&
� ���6'6
�����#�������������6'$6
��*����#���6'$6
�����6'$
�����"��
���#� ���"#����6'��
�����������#������6'�6
����"����6'$
���#"����6' $
"�#�+�����6' $
"����#���"�#�+�����6' $
�����������;����F���#"#"���6' $
�+#��6'$
�����"��
." ��+���#�"� �������#� "#��$$'4�
." ��+���#�"� ��$$' !
��#� "#��$$' �
���� �#"��
"�#���#"��
"����#������������#��$�'$
F�� "#�����������#��$�'
�����������������#��$�'�
"���+����#��� ���#"����$�'�4��$�'4!
��#"� �F���#"#"���$�'�6��$�'6�
�#���$�'&
� ��"����� ��.��*�����$�'�$��$�'44
��� ��������;0.�;�����#��$�'4&
����#���#�. ���$�'4
�"�������"�#���#"����$�'� ��$�'4&
��*����
.��*+ ��"����$�'$���$�'4�
�"��#���$�'!
��#"� �F���#"#"���$�'�6��$�'6�
������$�' %
F���#"#���#�����#"����$�' ��$�'66
� ����.��*�����$�'�$��$�'44
�"� "H�����������#��$�' &��$�'6!
����.��*+ ��"����$�'�&��$�'6�
�"#���#�.��*+ ��"����$�'���$�'4�
���� �#"����"��#����*������$�'!
���� �#"�����#"� �F���#"#"�������*
�����$�'�6��$�'6�
���� �#"����������*������$�' %
���� �#"����#������� ���$�'&
���� �#"����#���"�#���#"����F�� "#�
���������#��$�'&
���� �#"�����*�����#������.��*+ ���
$�'$%��$�'4�
���� �#"�����*������"#���"� "H��
��������#��$�' &��$�'6!
���� �#"�����*������"#���#
.��*+ ��"����$�'���$�'4�
���� �#"������������ �#"��
���� �#"�����*.����������"��
��#"����$�'&6
��������#��"�#���#"�����������
���������#��&'$!
��������#�����������"�����#"����!'��
��������#����#���������"�����#"���
&'$!
���#��#���##"��������'$4
�����"����"�#�����." "#���$�'4
�����#"����+ �#�+" ���$�'
�����#"���+ �#�+" ��#��#���"�#�+����#�. ��
$�'
��#�"�+���#"������"��"����$$'$6
���#"��
����"#���#����#��#���"#��6'�&
�#��4'%
���#"�������"#���#�+����#��#���"#�
6'�&
���#"��� �#��4'%
���� �#"��� ���#"������ �� �#"����('$6
D
��#�
����#"��������('!
����#"���#�#��('!
#�#��('&
��+"�"��
���" �." "#���� �� �#"����&'
����"#���#��6'6
.�������������#�"#����6'�$
���#� �����#�����6'%
��"���.��*+ ����6'�
"#��D���#"����6'$6
���#"����6'$%
��#�����6'&
� ���6'6
��*����#�� ���#"����6'$6
�#����#� �"#����4'6
�"� ����#� �"#����4'6
��+"�"������" �." "#���� �� �#"���+���
.������&'
Index
B73.3.1 (6/99)
��+"�"�������"#���#��#�����*����#�
���#"����6'$6
��+"�"�������#����#�������"#
"����#�����"���.��*+ ����6'�
��+"�"���#���.�������������#�"#���+��#��
." ��+���#�"� ��6'�$
��+"�"���#�������"#���#����#� �����#���
�+�����"#���#��6'%
��+"�"���#�������"#���#���#����+��#��
"#����6'&
��+"�"���#�������"#���#�� ���6'6
��+"�"���#��� ���#"����#�#�����*����#��
6'$%
��+"�"���#�����*����#��"��#���"#��D
��#"����6'$6
�� �#"��
�"� ����.��� '�!
��*������$$'4
���F�""#���$$'4
������������"����$$' $
�"��#������+��#�"����$'$%
+��#����$'$�
����"����$'$%
�"��#���:"#
����"����$$'$�
�#����� �� �#"����$$'$�
�"#".�#"���)�F�"����#�5 ���"���
"�#���#"����$'�
�������#�#�����������##"��������'6
������#�������#"����('!
E
��� ����� �.���#�
��#�� ���#"�����'$�
�##"��������'$�
��#�0�������8" ������"�����#"����6'��
��#�0�������)�#�������� �������"��
��#"���� '4$
��#�0�������)��#"��������"�����#"���
6'$!
��#�0���������*����#�������"��
��#"����6'��
��#�"��
��������F���#"#"�������� ���%'6
��*������������ '�$
��#�"�����������F���#"#"���%'6
��#�"����#������� ��� ' �
��#�"����#�������"���� ' !
��#�"�����*������������ '�$
��#��"��)�F�"����#�5 ���"������
�<���#"�����#����$'!
F
1�#���#�����������$'�4
1��#��
��������F���#"#"��#��*"����$'$$
����+��#�"���������#"����$'$�
��#�"� �#��*"����$'$$
��#� "#��$'$
�����#"�������� "�������#��*"����$'$�
�#������� �����#"����$'$�
���#"����$'$$
��#"���"�#��#"����$'$
��*��������#"����$'$�
1"<��� ���#"�����<��� ���('&
1 �#�1" ��������#"����$�'
1��
��08������ �#"���)��""����$�'6�
��08��5����#�)��""����$�'4�
���� �#"�����*.������$�'&4
��������#������)��""����!'�$
�����.��-#���� '!!
������������ '&6
�"� ��������"����$$' %��$$'4$
��#��8" ��+�2�#�"� �-�+���#"����6'�$
��#��>���"��2����0)�#����'����'$$
��#��)��#"���-�+���#"����6'$&
��#�0�������)�#�������� ��� ' �
>���� �2�������'�
-�#����"�#��5����#�)��""���� '�&
-����#���-���)��""����!'$$��$�'��
-#���(��" �." "#����+"�"#"����&'4
-#���:�������#�" ��$$'$!
-#��08�����-�+���#"����6'&
:"��������� "�����*.�������'�
:"��0-#���)� �#"���"��)��""�����' 6
2���+��#�"������#��#�)��""�����'$&�
6'$���6'�4
����#"����"��#�����#�" �)��""���
$$'��
����#"���E���#"#"��-�F�"���%'�$
5�#�(��" �." "#��;�2� #"�:��� �-����#���
&'&
5�#�:"#���#�" �-�F�"���&'$$
Shop Floor Management
B73.3.1 (6/99)
5����#"����#�#���$$'6
)�#�������� ��)��""���� ' �
)��#"�����#�" �� '��
)��#"���E���#"#"�������#�#��� '$
�� ��#�2� #"� ��:���#"���� '!���!'$�
��F����"�����*.�������'$�
��"� �B��.��(��"�#"����$�'&�
��"� �B��.��)��""���� '��
���#����2�"�#�������)��""����&'$4�
&'$6
�� "#�:"����"�������'%
�#������7�"#��+�2�����)��""���
6'�!
��.#"#�#��(��" �." "#��)��""���� '!$
�����8��*+ ����$�'����$�'6
���� "�0-#���)� �#"���"���$�'� �
$�'4&
�"�����#��)��""����%'&��%'$ ��$�' 6�
$�'6&
�����#"���)�����)��""���+�
5 $$��Q$��$�'$�
��*����#��2�#��)��""�����'�!�
6'��
��*����#��)������7�"#�)��""���
�' �
��*������� �����)��""�����'$
��*��������� �#"�����#�" ��$�'%�
$�'4$��$�'4
��*�������#�" �� '� ��$$'!
��*�����5�#�:"#�� '&4�� '&&��6'�%
��*�����5����)������)��""���
'�4
��*�����)��#"���� '$��� '!!
��*������#�#��'�?���)��""���
%'$!
��*������#�#��'�E���#"#"�
)��""����%'$�
��*������#�#��7���#����'4
��*��"#��8" ��+�2�#�"� ��6'�$
��*��"#��8����05 ��#����#��#��&'4
��*��"#�������"����$$' ���$$'4�
��*��"#����������#�������!'��
��*��"#��>���"��2����0)�#�������
�'����'$�
��*��"#��-�.����������#"���)����
+��5 $$��Q$��$�'$�
��*��"#��-����"��#����
��08�;5����#��$$'�%
��*��"#��-#���(��" �." "#���$$'$
��*��"#��-#���8������6'&
��*��"#��-#���:������$$'$&
��*��"#��G��.���2�#���!'�4��!'�!
��*��"#��:"����"��#���:"#��$$'�
��*��"#��:"��0-#���)� �#"���"����' 4
��*��"#��2���+��#�"������#��#�
�'$6��6'$���6'�
��*��"#��2���+��#�"�����*�����
'� �� '&4��6'����$$'&
��*��"#������#"����"��#����$$'$%
��*��"#������#"���E���#"#"���%'��
��*��"#������B��.���$�'�!��$�'6
��*��"#������������ "�����'4
��*��"#��5���������$$'�%
��*��"#��5����#"���?"#����$$'��
��*��"#��5����������#��)���"���
'$
��*��"#��)������7�"#���' $
��*��"#��)��#"�������#"����6'$&
��*��"#����"� "H���-����-#���
$�' !��$�'&$
��*��"#�����#������*.������&'$4�
&'$6
��*��"#���#������7�"#��+�2�����
6'�!
��*��"#������ "�0-#���)� �#"���"��
$�'� ��$�'4&
��*��"#������ ��������������$$'
��*��"#��7��." "#���$$'$�
��*��"#����*����#�������� �
)��"����$$'�!
��*��"#����*����#���6'$%
��*��"#����*������� �������'$�
��*��"#����*��������� �#"���
$�'���$�'$%��$�'4$��$�'4
��*��"#����*�����-����#���-���
!'$$
��*��"#����*�����5�#�:"#��&'$�
��*��"#����*�������"� �B��.��
'��
��*��"#����*������#�#��'�?���
%'$&
��*��"#����*������#�#��'
E���#"#"���%'$�
��*��"#����*������"�����#���%'&�
%'$���$�' 4��$�'6&
Index
B73.3.1 (6/99)
G
>����#"������*����#�����������"#�
�' �
>����#"�������������*�� '$!
>���"��#�<#���"���� '��
>���������"����4'4
>����������#��������#� ��4'4
>�������#� ���##"�������4'4
H
?�������"#���#��"����#����6'$
?��
��#�"��������� ���%'6
���#"���������#
�.���('4
����"����('4
������('6
F������('6
�#����('4
#�#� �F���������������('6
����"����%'$
��"��"��
#�#���%'$6
#����#"����%'�$
#"���.�"������� ���#"���������#��('6
#��*"����+��#����$'$$
����#"����%'$$
?�������E���#"#"�������"�����#"���
%'%
?�������F���#"#"�
"�#���#"��
���� ��%'$
F�� "#�����������#��%'�
����#"��������� ���%'$�
?�������E���#"#"��7���#�������"��
��#"����%'$4
I
-�.��������� �#"���-�F�"�������"��
��#"����$�'$4
-�.��������� �#"���5����������"��
��#"����$�'&
-�.�����1 �#�1" �������"��������"��
��#"����$�'4
-�.�����?�������E���#"#��-�F�"��
����"�����#"����$�'$
-�.�����?�������E���#"#��5�����
����"�����#"����$�'&
-�.�����-����#���-���-�F�"��
����"�����#"����$�'$
-�.�����-����#���-���5�����
����"�����#"����$�'&
-�.����������8��*+ ���-�F�"��
����"�����#"����$�'$6
-�.����������8��*+ ���5�����
����"�����#"����$�'!
-�.�����#����#"������"��"����$�'%�
$�'$�
-�.�������*�����-�F�"�������"��
��#"����$�'$�
-����"��#� "#������ "��#"���� '4%
-�#���#"��
�����"#���F�"����#�� ���"���
����� "�����'$
�)5025�02)5����#�"�����*�����
'��
"����#������������#
���� �#"����$�'$
"�"����!'$
���� ����������F���#"#"���%'$
��������#�����" �." "#��������#����
&'$
�����#���#�����������#���##���"��
��� ����#�����#��� '&$
F�� "#�����������#
���� �#"����$�'
���� �#"����#���$�'&
��#�"�����*������ '6
��������F���#"#"���%'�
����"�����*������ '4&
�#������� ����'!
� ���������������#������"��
��*������ '4!
�����������������#
�##���"�����#� "#�� '&
�##���"�����#"���� '!&
���� �#"����$�'�
"�"����!'$��!'%
����"�����*������ '4!
��#�����&'$!
�"#����#��"��)�F�"����#�5 ���"��
�����<���#"����$'!
Shop Floor Management
B73.3.1 (6/99)
-�#����"�#�
�##���"���� '$&
�"����F���#"#���#�����#"����$�'6
-�#�����." "#���$�'$
�����#"����+ �#�+" ���$�'
���"�"����#����#"����$�'6
��"��"����"�.�����#����#"����$�'%
���"���������"����$�'4
���"����#����#"����$�'$!
�##"�������+ �#�+" ����;�+�������$�'
#����#"��
"�.������$�'$
��#.������$�'$
�������$�'�
-�#�����." "#���������$�'�
-����#���-��������"�����#"����!'$
-����#���2��������#��"�#���#"����$'%
-���#����#"����!'$
-�"��
"�#���#"��
"����#������������#��!'$
�����������������#��!'$��!'%
��#�"� ��!'%
��#�"�
��#���#"�� ��� '4�
����� ���!'$�
��+ ��"����!'$�
-�"���"����#��
�"��"�����"� ����.���!'$�
���"�#"�����������#��!'$�
.��*+ ��"����!'�
� �"�����#���#�"� ��!'$�
+��������#�F���#"#���!'$�
���#"����!'
����� ���!'���!'$�
����"����!'$
��+ ��"����!'���!'$�
���"�����#����#"����!'$�
����.��*+ ��"����!'�
-�"�����#�"� ��!'%
-�"�����#�"� �.����+ ��"����!'$�
-�"�����#�"� ������ ���!'$�
-#��
��+"�"�������" �." "#���� �� �#"����&'
�����"������#����"�+���#"����&'$
����"������������#������!'$%
��"��"�������" �." "#��������#�����&'$
-#���8����05 ��#������"�����#"����6'�
-#���:����������"����$$'$6
-#���:�����@�����()��IA������"��
��#"����$$'$!
K
G��.���������#"��������"�����#"���
!'�6
G��.������� �������"�����#"����!'�!
G��.����!'&
����"����!'&
����"����!'�
L
:���#"��
�� �� �#"����('$$
���� �#"����('$6
��#���('�
��� ��('$$
����+��#�"����('$
�����"#��('$!
�#��������('$�
#�#� �F�������������������('$�
������#��('4
���� �#"����('�
��#�
����#"��������('!
����#"���#�#��('!
+��#���('$
+"<����('&��('!
�<��� ���('&
���
�.���('4
����"����('4
������('6
F������('6
�#����('4
#�#� �F���������������('6
��� ��('�
����+��#�"����('�
��� ���"��������������#�����#"���
('$�
��� ���"�������#"����('%
����"����('$
�����"#��('�
�"��� ����������('6
���������#��('6
Index
B73.3.1 (6/99)
��������"#��('6
�#����('
#"���.�"�������('6
#�����('�
��"�. ���('&��('�
��*������#�#���#���('&
:��� � ���#"������ �� �#"����('$$
:"�������"#���� �#"���"����##"������
�' 4
:"����"��#���:"#������"�����#"���
$$'�
:"��������� ��)��"��������"�����#"���
$$'�&
:"��������� "�����*.����������"��
��#"�����'$$
:"�����F����"�����*.����������"��
��#"�����'$
:���#"�����#�����&'$
:�#������"� ����#� �"#����4'6
:�#����#�
��+"�"����"#����4'6
�����������#����������"����4'
:�#�����"��������"����4'!
:�#�#�#���4'%
:�#
��������:�#�����"��
���#"����4'%
#�#���4'%
#�. ���4'$�
M
2����"��
����"#���#
���#� ���"#����6'��
�����������#������6'�6
���"�#���#"�������� �#"����$�'� �
$�'4&
��#����"�+���#"����&'$
2����"������" �." "#��"�+���#"����&'
2����"�������"#���#�+�����#� ��
"#����6'��
2����"�������"#���#�+����������
��#������6'�6
2����"������� �#"����"������"�#
��#"����$�'46
2����"�����������#��"������"�#
��#"����$�'��
2����"�����#����"�+���#"����&'$
2���� ���"�"����!'���!'$�
2���+��#�"�����##"�������"�+���#"�����'!
2���+��#�"���������#"����+��#����$'$�
2���+��#�"������#��#���##"��������'$4
2���+��#�"��� ���#"������ �� �#"����('$
2���+��#�"�����*����������"��
��#"���� '��
2�#��5����#"��������� "����"�#���#"���
$'�
2�#�"�
"�"����!'%
��#���#"�� ��� '4�
����� ���!'$�
��+ ��"����!'$�
#��*"����+��#����$'$$
2�#�"� �)�F�"����#�5 ���"���
"�#���#"����$'�
2����������1 ���2��������#��"��#�
2���+��#�"����$'�
2����������� �� �#"����('$�
2� #"':��� �8" ��+�2�#�"� ������"��
��#"����$$'46
O
����#"����"��#���-�F�"�������"��
��#"����$$'��
����#"������.�����*���������
.��*+ ����$�'�!��$�'6
����#"���E���#"#��-�F�"�������"��
��#"����%'�$
����#"���#�#�����������#�
+"<��� ���#"����('!
��"�. �� ���#"����('�
����#"���#�#���������##"��������'6
����#"��
��� ���"����('%
��� ���"��������������#��('$�
��#"�������#"�����"���� '$
P
5�#�(��" �." "#�������"�����#"����&'!
Shop Floor Management
B73.3.1 (6/99)
5�#�7��." "#�������"�����#"����$$'$
5�#� "#
�##���"���� '%
����"���� '&�
"�#���#"�� ��� '&�
����� ��� '&�
�"�������5���"���������� '&�
�����"����$$' ���$$'4�
+��#����$'$
������#"���� '4�
��"��"����"�+���#"����$$'$$
�"��������#���"#���� '$$
5�#�:"#������"��������"�����#"���
$$'4$
5�#�:"#�-�F�"�������"�����#"����&'$$
5��� ��"�#���#"����$'%
5����"#� ���#"������ �� �#"����('$!
5���#���"#�����"���� '$$
5�����������##"��������'4
5�#����������"����4'4
5�#��������#� ���##"�������4'4
5�#��#���"#��������##"��������'6
5�+ ��"����"�"����!'���!'$�
5"��� ���������� ���#"���������#��('6
5"�#"��
� ���#�����&'$!
." ��+���#�"� ��$$'4�
��������#���#�����&'$&
�� #"; ��� �." ��+���#�"� ��$$'46
����� "���"�+���#"������*����#��
�'&
��#�����&'$!
"�� �� ��� �." ��$$'4
�������+������ '&�
���������"�+���#"����$$'4�
��*����#�������� "���"�+���#"�����'&
��*������������� '&�
5"�#"������ �������������"�+���#"���
$$' 4
5"�"#���������##"��������'4
5��������+��#�"����$'$%
����"����$'$%
5���"��
�#������� ��� '46
��*������ '46
F���#"#���#�����#"����$�' ��$�'66
����.��*+ ��"����$�'�&��$�'6�
5���"������. ��"�� �"���� ��+�
���+"�����"#����� ��� '4&
5���"���*��.���������#"���.��"#���
!'�
����"����!'�
5���"���*��.������ ��.��"#����!'�&
5���"���*��.��
������#"���.��"#����!'�
���;�����������!'&
����"����!'&��!'�
��� ��.��"#����!'�&
#��;�����������!'!
5���"�����#"��
( ����#�����&'$!
8�#���)�#��� ����$$'�
���� �#"�����*.������$�'&6
��������#�������!'��
��������#����#�����&'$!
��#�0�������8" ��6'��
��#�0�������)�#�������� ��� '4$
��#�0�������)��#"����6'$!
��#�0���������*����#���6'��
?�������E���#"#"���%'%
?�������E���#"#"��7���#���%'$4
-�.��������� �#"���-�F�"���$�'$4
-�.��������� �#"���5������$�'&
-�.�����1 �#�1" �������"����$�'4
-�.�����?�������E���#"#��-�F�"��
$�'$
-�.�����?�������E���#"#��5�����
$�'&
-�.�����-����#���-���-�F�"���$�'$
-�.�����-����#���-���5�����
$�'&
-�.����������8��*+ ���-�F�"���$�'$6
-�.����������8��*+ ���5������$�'!
-�.�������*�����-�F�"���$�'$�
-����#���-����!'$
-#���8����05 ��#��6'�
-#���:�����@�����()��IA��$$'$!
G��.���������#"����!'�6
G��.������� ���!'�!
:"����"��#���:"#��$$'�
:"��������� ��)��"����$$'�&
:"��������� "�����*.�������'$$
:"�����F����"�����*.�������'$
2���+��#�"�����*������ '��
2� #"':��� �8" ��+�2�#�"� ��$$'46
����#"����"��#���-�F�"���$$'��
����#"���E���#"#��-�F�"���%'�$
5�#�(��" �." "#���&'!
5�#�7��." "#���$$'$
Index
B73.3.1 (6/99)
5�#�:"#������"����$$'4$
5�#�:"#�-�F�"���&'$$
5����#"���?"#����$$'��
5����#"����#�#���$$'&
5���������$$'%
)���#������E���#"#"���6' �
)��#"��0(�� �"�)��""����$�'�4
�����1 ����� �������'$4
�����1 �����*.�������'6
���#����2�"�#��������&'$&
���#������*.������&'$4
�"�� ��:��� �8" ��+�2�#�"� ��$$'4
�#������5���������'%
�������(��" �." "#���$$'$4
�����8��*+ ����$�' �
���� �0����������#��$$' 4
�����7���-#����$$'4�
��*����#��2�#��)��""�����' �
��*����#��)������7�"#���' 4
��*����#�������� ��)��"����$$'��
��*��������� �#"����$�'$�
��*�����>����#"���� '4%
��*�����5�#�:"#�� '!4
��*�����)��#"���� '��
5���"�����*������"���F���#"#���#
����#"����$�'66
5���"�����*������"�#���#"��
F�� "#�����������#�� '4&
� ���������������#�� '4!
�����������������#�� '4!
5���"�����*����������#������� ��
'46
5���"�����*�����#���������
.��*+ ����$�'�&��$�'6�
5���"�����*������"���F���#"#���#
����#"����$�'
5�������#��"�#���#"����$'�
5����#���#��2��������#��"�#���#"����$'�
5����#"���?"#��������"�����#"���
$$'��
5����#"�������� "����+��#����$'$�
5����#"����#�#�������"�����#"����$$'&
5����#"���#��*"����+��#����$'$�
5���������-�
5���!$�@�����1 ����� ����A
��*������� �����)��""�����'$
��*��"#����*������� �������'$�
5��$%$�@�#������5������A
��#��>���"��2����0)�#����'��
�'$$
>���� �2�������'�
��*��"#��>���"��2����0)�#�
�������'����'$�
5 ����@��#�0�������8" A
��#��8" ��+�2�#�"� �-�+���#"����6'�$
��*��"#��8" ��+�2�#�"� ��6'�$
5 ���5�@��#�0�������8" A����08�
5����#�)��""����$�'4�
5 �� �@��#�0�������)��#"��A
��#��)��#"���-�+���#"����6'$&
��*��"#��)��#"�������#"����6'$&
5 ��&�@��#�0���������*����#�A
��*����#��2�#��)��""�����'�!�
6'��
��*��"#����*����#���6'$%
5 ��!�@��#�0�������)������7�"#A
��*����#��)������7�"#�)��""���
�' �
��*��"#��)������7�"#���' $
5 ��%�@2���+��#�"������#��#A
2���+��#�"������#��#�)��""���
�'$&��6'$���6'�4
��*��"#��2���+��#�"������#��#�
�'$6��6'$���6'�
5 �����@5�#�(��" �." "#�A��5�#
(��" �." "#��;�2� #"�:��� �-����#����&'&
5 ���4�@5�#�:"#������"��A
�"� ��������"����$$' %��$$'4$
��*��"#�������"����$$' ���$$'4�
5 ��$��@5�#�7��." "#�A����*��"#�
7��." "#���$$'$�
5 $�6�@(��. ����"� �B��.�A
��"� �B��.��)��""���� '��
��*��"#����*�������"�
B��.��� '��
5 $�!�@(��. ����"� �B��.�A
��"� �B��.��(��"�#"����$�'&�
��*��"#����"� "H���-����-#���
$�' !��$�'&$
5 $�%�@��#�0�������)�#�������� �A
)�#�������� ��)��""���� ' �
��*��"#��)�#�������� ��� ' �
5 $�% �@:"��0-#���)� �#"���"�A
:"��0-#���)� �#"���"��)��""���
�' 6
��*��"#��:"��0-#���)� �#"���"��
�' 4
5 $$$�@��#�0����������A
������������ '&6
Shop Floor Management
B73.3.1 (6/99)
��*�����5�#�:"#�� '&4�� '&&�
6'�%
5 $$$ �@-����#���-��A
-����#���-���)��""����!'$$��$�'��
��*��"#����*�����-����#��
-����!'$$
5 $$$4�@��*��������� �#"��A
��*��������� �#"�����#�" ��$�'%�
$�'4$��$�'4
��*��"#����*��������� �#"���
$�'���$�'$%��$�'4$��$�'4
5 $$$6�@��08������ �#"��A����08�
���� �#"���)��""����$�'6�
5 $$$&�@��������#�����A
��������#������)��""����!'�$
��*��"#����������#�������!'��
5 $$$-�@��#�0����������A�
-�#����"�#��5����#�)��""���� '�&
5 $$$5�@��#�0����������A����*
����5����)������)��""���� '�4
5 $$��@��#�0����������A
�����.��-#���� '!!
)��#"�����#�" �� '��
��*�����)��#"���� '$��� '!!
5 $$�$�@����?����#�#�A
��*������#�#��'�?���)��""���
%'$!
��*��"#����*������#�#��'�?���
%'$&
5 $$���@����E���#"#"���#�#�A
��*������#�#��'�E���#"#"�
)��""����%'$�
��*��"#����*������#�#��'
E���#"#"���%'$�
5 $$��$�@?�������E���#"#"�A
�"�����#��)��""����%'&��%'$ �
$�' 6��$�'6&
��*��"#����*������"�����#��
%'&��%'$���$�' 4��$�'6&
5 $$� �@�����8��*+ ��A
�����8��*+ ����$�'����$�'6
��*��"#������B��.���$�'�!�
$�'6
5 $$�4�@����#"���E���#"#��-�F�"�A
����#"���E���#"#"��-�F�"���%'�$
��*��"#������#"���E���#"#"���%'��
5 $$��@���#����2�"�#������A
���#����2�"�#�������)��""����&'$6
��*��"#�����#������*.������&'$6
5 $$��@���#������*.����A
���#����2�"�#�������)��""����&'$4
��*��"#�����#������*.������&'$4
5 $$%�@���� �#"�����*.����A�
���� �#"�����*.������$�'&4
5 $�$�@5�#�:"#�-�F�"�A
5�#�:"#���#�" �-�F�"���&'$$
��*��"#����*�����5�#�:"#��&'$�
5 $����@�"��#���:"#A
����#"����"��#�����#�" �)��""���
$$'��
��*��"#������#"����"��#����$$'$%
5 $��4�@��*��"#����*����#������� �
��"��A��$$'�!
5 $��6�@�����1 �����*.����A
��*������#�#��7���#����'4
��*��"#������������ "�����'4
5 $��&�@5����#"����#�#�A��5����#"��
�#�#���$$'6
5 $��!�@5����#"���?"#��A����*��"#�
5����#"���?"#����$$'��
5 $�4��@5��������-�F�"�A
��*��"#��-����"��#����
��08�;5����#��$$'�%
��*��"#��5���������$$'�%
5 $6 �@:"��������� "�����*.����A�
:"��������� "�����*.�������'�
5 $64��@:"��������� "�����*.����A�
�� "#�:"����"�������'%
5 $6&�@:"�����F����"�����*.����A�
��F����"�����*.�������'$�
5 $6!�@G��.���2�#�A����*��"#�
G��.���2�#���!'�4��!'�!
5 $6%�@:"����"��#���:"#A����*��"#�
:"����"��#���:"#��$$'�
54��$�@���� �0�������-�F�"�A����*
�"#������ ��������������$$'
54$��$�@8����05 ��#����#��#A
-#���(��" �." "#����+"�"#"����&'4
��*��"#��8����05 ��#����#��#�
&'4
54$�� �@�#������7�"#��+�2����A
�#������7�"#��+�2�����)��""���
6'�!
��*��"#���#������7�"#��+�2�����
6'�!
54$��&�@-#���8����05 ��#A
-#��08�����-�+���#"����6'&
��*��"#��-#���8������6'&
Index
B73.3.1 (6/99)
54$$$�@-#���:����A
-#���:�������#�" ��$$'$!
��*��"#��-#���:������$$'$&
54$����@�������(��" �." "#�A����*
�"#��-#���(��" �." "#���$$'$
54��6 �@��#�0����������A���� ��#
2� #"� ��:���#"���� '!�
54��6 �@-����#���-��A���� ��#
2� #"� ��:���#"����!'$�
54 �%��@���� "�0-#���-�+���#"��A
���� "�0-#���)� �#"���"���$�'� �
$�'4&
��*��"#������ "�0-#��
)� �#"���"���$�'� ��$�'4&
54 $��@��#��)���"�#�.��5�A
)��#"���E���#"#"�������#�#��� '$
��*��"#��5����������#�
)���"���� '$
54��$ �@��#�0����������A
��.#"#�#��(��" �." "#��)��""���� '!$
��*�������#�" �� '� ��$$'!
��*��"#��2���+��#�"�����*
����� '� �� '&4��6'����$$'&
54��$Q$�@-�.�������*�����-�F�"�A
�����#"���)�����)��""���+�
5 $$��Q$��$�'$�
��*��"#��-�.����������#"��
)�����+��5 $$��Q$��$�'$�
5���������#�� ���#"���������#��('6
5�������������"�����#"����$$'%
5��"��
���������"����$$'%
��*������$$'4��$$'�
5��"�����*������$$'�
Q
E�� "#��2��������#��"�#���#"����$'�
E���#"#"�
���� �#"������#"� ��$�'�6��$�'6�
��#�"��������� ���%'6
���;���;��"�#��$�' 4��$�'6&
����"����%'$
��"��"��
����#"���#�#���%'$%
#�#���%'$!
#����#"����%'�$
#��*"����+��#����$'$$
����#"����%'$$
E���#"#���#�����#"��
���� �#"������*������$�'66
����"������*������$�'
E��������������������� �� �#"����('$�
R
)�#������� �
���� �#"����$�'&
���#"����+��#����$'$�
��#�"���� ' !
"�#���#"����F�� "#�����������#���'!
����"���� '46
����� "�����'!
�F����"�����'$$
)���"�#���#"�������� �#"����$�'� ��$�'4&
)���"�"����#����#"����$�'6
)���"�"���#����#"���+����<#���
�#����$�'6
)����"������������#������!'$%
�������!'��
)����"�����������#������!'$%
)�+��"������*����#��"�+���#"�����' �
)� ��"��
.��*�������"������� �#"����$�'44
� ��.��*�����$�'�$
)� ��"���� ��.��*������"��
���� �#"����$�'����$�'44
)���#"#"�������+��#�"����$'��
����"����$'��
)���#"����+��#����$'$$
)���#
( ����#�����&'$!
��������#����#�����&'$&
�"��#���:"#���'&
?�������E���#"#"��5��+��%'�$
?�������E���#"#"��7���#���%'$
2� #";:��� �8" ��$$'46
����5���"���� '4�
5���������$$'�
)���#������E���#"#"���6' $
�"�� ��:��� �8" ��$$'4
��� �������������"�+���#"����$$' 4
�����7���-�+���#"����$$'4�
)���#������E���#"#"�������"��
��#"����6' �
)���#"��������"#���#����*������6' $
Shop Floor Management
B73.3.1 (6/99)
)���#"�������"#���#��6' $
)��������"#
�����#"�����' �
���#"���������#��('6
�+��"�����' �
�##"��������' �
)��"��"��
���" �." "#���&'$��&'6
�"��#��� "#��$$'$�
��������F���#"#"���#����#"����%'�$
"�.�����#����#"����$�'%��$�'$�
"�+���#"����$$'$$
"#��� ������$$'$6
����#"���F���#"#"���#�#���%'$%
F���#"#"��#�#���%'$!
��#�����&'$
#�#�
�����%'$6
����#"���F���#"#"���%'$%
F���#"#"���%'$!
��� ��������������$$'
��*����#�� �����$$'�&
��*�������' ��$$'��
"�+���#"�����'
)��"��"���������""���"�.����
#����#"����$�'%
)��"��"����"��#��� "#�"�+���#"����$$'$�
)��"��"�����������F���#"#"�
#����#"����%'�$
)��"��"���"�+���#"����$$'$$
)��"��"���"#��� �����"�+���#"����$$'$6
)��"��"��� "����"��#��� "#��$$'��
����"����$$'��
)��"��"�����#����" �." "#���&'6
)��"��"�������������$$'��
)��"��"��������#"������� "��
����"����$$'�4
��*��"#��:"��������� ��)��"���+���
$$'�4
)��"��"��������#"����"#����$$'�$
)��"��"��������#"���#�#�������"���
$$'4
)��"��"����#��"�+���#"��
"����"��#��� "#��$$'��
�����#"���#�#���$$'4
)��"��"���#�#�������#����#"����%'$6
)��"��"������������" �." "#���$$'$
)��"��"������ �������������"�+���#"���
$$' $
)��"��"���#���#�#���+������%'$6
)��"��"���#���#�#���+�����#"��
F���#"#"���%'$%
)��"��"���#���#�#���+�F���#"#"���%'$!
)��"��"���#���#�#���+���*��������
�#������� ���$$'
)��"��"�����*����#�� �����$$'�&
��*��"#�����#�������� ��)��"��
+����$$'�!
)��"��"�����*����������#������� �
#�#���$$'4
)��"��"�����*�����"�+���#"�����'
)��""������*������#�#���$$'
)��#"���"�#��#"��
�##���"���� '$
"�#���#"�� ��� '!&�� '!!
����� ��� '!&
�"�����������"���� '!&
�����"��
#�#��� '!&
#�#���+�����#"���� '!&
���#"���������������� '!&
�� �#"������#"�������#"���� '!&
+��#����$'$
���#"���� '!&
������#"���� '4�
�"������#"�������#"���� '$
)��#"��0(�� �"������)���"�#���#"��
)��#"��0(�� �"�)��""��������"��
��#"����$�'�4
)���"�����������"���� '4�
)���"���#��������"����������$�'4
S
�� ������2��������#
"�#���#"����$'%
��*������ '4!
������ "��
"�#���#"���������"#���F�"����#
� ���"�����'$
��*�������'$
������ "���"#�������������#"��� "�����'!
����"�����'!
������ "����#�
����"�����'!
��"��"��������#"������� "����$$'�4
����� "���"#�������������#"��� "���
�'!
Index
B73.3.1 (6/99)
�F����"����#��.��� �"+"��#"��������
������� ����'$$
������ "�����*����������#������� ��
�'$
����"����#����#"����$�'$!
����"���#����#"���#���<#��� ��#���
$�'$!
��F����"����#��.��� �"+"��#"���������
�'$$
��F����"����#��.��� �"+"��#"��������
������� �������"�����'$$
��"� ����#� ����+"�"����"#����4'6
��"� ����.�
�"��"���� '�!
���� �#"������*������$�' &��$�'6!
�� �#"���� '�!
��##"���#��������������#�+��#�����;����
.�;�����#��$�'4�
��##"�����
��#������������������ ���'4
���#��#�����"���"�����'$6
�������#�#�����������'6
��� ����� �.���#����'$�
�����������#��������#� ��4'4
"�+���#"�����'!
"�������"#���� �#"���"����' 4
����+��#�"������#��#���'$4
����#"���#�#���������'6
������������'4
��#��#���"#��������'6
�"�"#���������'4
��������"#���' �
����+ ����� �������'$�
#����������������'!
#�#���������'4
#�����������'4
��*����#����'�&
��##"��������� ����� �.���#����'$�
��##"������ "�������"#���� �#"���"����' 4
��##"����������+��#�"������#��#���'$4
��##"����������+��#�"���"�+���#"�����'!
��##"��������������"#���' �
��##"������#����������������'!
��##"������#���+ �#�+" ����;�+�������$�'
��##"������#�������+ ����� �������'$�
��##"��������*����#����'�&
��#��������"�����'$
��#���������� �� �#"����('$�
�����1 ����� ����������"�����#"���
�'$4
�����+ ����� �������##"��������'$�
�����1 ���2��������#
�"��#������+��#�"����$'$%
+�#���#�����������$'�4
+��#����$'$�
�����+ ����$'$4
���������+��#�"����$'$%
���#"#"�������+��#�"����$'��
�#���"�#���#"����$'�
�#����#��������"�����'$
�#���#�. ���$'$6
#�����+�����+��#�"����$'$�
�"������"#��+��������$'$�
�����1 ���2��������#��"��#�
2���+��#�"�������������"����$'�
�����1 �����*.����������"�����#"���
�'6
�����������*������"���� '$!
���#����2�"�#������������"�����#"���
&'$&
���#������*.����������"�����#"���
&'$4
���#���
�����"����&'$6
"�#���#"������������#��&'$
���#"����&'$
�����"����"�+���#"����&'$
�"�#"����&'$!
��������#��&'$&
��"��"����&'$
�"�� ��:��� �8" ��+�2�#�"� ������"��
��#"����$$'4
��+#�����"#���#��"����#����6'$
�#������5������������"�����#"���
�'%
�#����������������##"��������'!
�#�#���#�
�� �� �#"���� '$&
����#"����('!
��*������('&
+"<��� ���#"����('&
��"�. �� ���#"����('&
�#�#�����""������*������$$'
�#�#���������##"��������'4
��.#"#�#��"#��������"���� '!$
�������(��" �." "#�
����"����$$'$
����"�����#"����$$'$4
�����8��*+ ��������#"������.���$�'�!
Shop Floor Management
B73.3.1 (6/99)
�����.��*+ ��
���� �#"������*������$�'6�
"�"����!'�
�����8��*+ ��������"�����#"����$�' �
���� ������������
����"����$$' $
F���#"#"�
��������$$' $
��� ���$$' $
���� �������������"�+���#"�����"�#"���
$$' 4
���� �0����������#������"�����#"���
$$' 4
��#���"�#���#"����$'!
��#�������"����#�. ���$'$6
��#����#�����'$
��#������������'4
�������#�#�����������'6
��� ����� �.���#����'$�
"�������"#���� �#"���"����' 4
����+��#�"������#��#���'$4
����#"���#�#���������'6
������������'4
��#��#���"#��������'6
�"�"#���������'4
��������"#���' �
����+ ����� �������'$�
#����������������'!
#�#���������'4
#�����������'4
��*����#����'�&
T
��. �
(�����#�:�����@1�%$$A��$'$6
(�����#�2�#��@1�%�$A��$'$6
(��. ��-�� �"���)� ��@1 �% A��$'$&
8" ��+�2�#�"� �2�#��@1 ���A��$'$6
8�"���7�"#�2�#��@1���&A��$'$6
1����#�@1 4&�A��$'$!
>���"��2����0)�#��@1��$%$A��$'$6
-�.�����8��*+ ���1 �#�1" �������"��
@)4!����A��$�'�
-�.��������� �#"���1 �#�1" �������"��
@)4!����A��$�'�
-�.��������� �#"���-�F�"��@54��$Q$A�
$�'�
-�.��������� �#"���5����
@) $$$4Q$-A��$�'�
-�.��������� �#"���5����@)4��$Q$A�
$�'�
-�.�����?�������E���#"#��-�F�"�
@5 $$��Q$A��$�'�
-�.�����?�������E���#"#��5����
@) $$��Q$-A��$�'�
-�.�����?�������E���#"#��5���
@) $$��Q$A��$�'�
-�.�����-����#���-���-�F�"�
@5 $$$Q$A��$�'�
-�.�����-����#���-���5����
@) $$$ Q$-A��$�'�
-�.�����-����#���-���5���
@) $$$Q$5A��$�'�
-�.�����-���1 �#�1" �������"��
@)4!����A��$�'�
-�.����������8��*+ ���-�F�"�
@5 $$�Q$A��$�'�
-�.����������8��*+ ���5����
@) $$� Q$-A��$�'�
-�.����������8��*+ ���5���
@) $$�Q$5A��$�'�
-�.�������*�����1 �#�1" �
�����"���@)4!����A��$�'�
-�.�������*�����-�F�"��@54��$Q$A�
$�'�
-�.�������*�����5����
@)4��$Q$-A��$�'�
-�#�����." "#����*�����5���
@)4��$Q$5A��$�'�
-����#������#��#�@14$��$A��$'$!
-#���8� ������<#��#"���@) $�9B��A�
$�'�
-#���8�����@14$��A��$'$!
-#�����#���������#�(��;���@1 ���&A�
$'$6
-#������)�+������@14$�4A��$'$!
-#���?"#���@14$$6A��$'$!
-#���:�����@14$$$A��$'$!
-#���:���#"���@14$��$A��$'$!
-#���2�#��@14$�$A��$'$!
-#��0:"���)� �#"���"��2�#��@1 $�%A�
$'$&
��.������2���+��#�"������#��#
@1 ��%A��$'$6
Index
B73.3.1 (6/99)
G��.���������#�" �@1 �$&$A��$'$&
G��.���2�#��@1 �$&A��$'$6
:���#"�����#�" �-�+���#"���@14&��A�
$'$!
:�#�2�#��@14$��A��$'$!
2���+��#�"���((-�@1 $%6�A��$'$&
25�02)50�)5�2�����@1 4$$A��$'$&
��#.���������#"����#�#���<#��#"��
@)4��$Q�IA��$�'�
��#.�������*������<#��#"��
@)4��$$IA��$�'�
)��#"���2�#��@1 �� A��$'$6
������ ��E���#"#����#�" �@1 $�%$A��$'$&
���#����2�"�#�������2�#��@1 $$�A�
$'$&
�����"H�����*��������)�+�����
@1 $��A��$'$&
��������)�F��#�@14&��A��$'$!
�������������#"���@14&$$A��$'$!
��*����#��2�#��@1 ���&A��$'$6
��*����#��)������7�"#�@1 ��!A�
$'$6
��*�����-�#��#"���@14���A��$'$�
��*�����2�#��@14��$A��$'$�
��*�����5�#�:"#�@1 $$$A��$'$&
��*�����)��#"���@1 $$�A��$'$&
��*�������"� �B��.��@1 $�6A�
$'$&
��*������"��������#"���@1 $$��A�
$'$&
��*�����=�"�����@1 $��A��$'$&
�"���.�"������� ���#"���������#��('6
�����#"��
���"�"����$�'6
���"����$�'$!
������������##"��������'4
������+�����+��#�"����$'$�
U
7���#���"��������������#������4'
7���#���"��� �#�����"����4'!
7���#���"��������+"�����������'
7���#���"�����*����������#�
����� ��� '
7�"#��+���������"����$'$�
7���#"������������F���#"#"���%'$$
.��.�#����%'$
7���#"�����������F���#"#"���%'$$
7���#"�����������F���#"#"��.��.�#���
%'$
7���#"�����������F���#"#"������� ��
%'$�
7"������"#��+��������$'$�
W
��������2��������#��"�#���#"����$'%
���#�"�������4'4
���#�"���#������4'4
���������"�+���#"�����"�#"����$$'4�
�����7���-#��������"�����#"���
$$'4�
��*����#��2�#��)��""��������"��
��#"�����' �
��*����#��)������7�"#������"��
��#"�����' 4
��*����#�������� ��)��"��������"��
��#"����$$'��
��*����#�
"�#�+��"������������2��������#�
�'�&
�"�#"��������� "���"�+���#"�����'&
�##"��������'�&
��*��������� �#"��������"��
��#"����$�'$�
��*�����>����#"��������"��
��#"���� '4%
��*�����5�#�:"#������"�����#"���
'!4
��*���������"�������#�� '4�
��*�����)��#"��������"�����#"���
'��
��*���������������#�� '&�
��*����
�"��"��
�"� ����.��� '�!
�"� ����.����"���"����!'$�
���"�#"������������#���"���"���
!'$�
�##���"��
��;0.�;�����#�� '$6
��;0.�;�����#� "#�� '�4
"�#����"�#��"#���� '�6
"�#����"�#��� '$&
��#� "#�� '%
Shop Floor Management
B73.3.1 (6/99)
��#� "#�"�#���#"�� ��� '&�
��#"���"�#��#"���� '$
��#"���"�#��#"���"�#���#"�� ��� '!&
��� ����#�����#��� '&$
.��*����� "���� '$�
�� �� �#"����#�#���#��� '$&
�����"����#�#���$$'&
����"�����.#"#�#��"#���� '!$
� �"����$$'
����"##"��
�����6'$
"����#����6'$
�+#��6'$
���� �#"��
.��*+ ��"����$�'$���$�'4�
�"��#���$�'!
��#"� �F���#"#"���$�'�6��$�'6�
������$�' %
F���#"#���#�����#"����$�' ��$�'66
�"� "H�����������#��$�'6!
����.��*+ ����$�'6�
����.��*+ ��"����$�'�&
�"#���"� "H�����������#��$�' &
�"#���#�.��*+ ��"����$�'���$�'4�
���� "��#"����"����"��#� "#�� '4%
���#"����+��#����$'$�
��#�
����#"��������('!
����#"���#�#��('!
#�#��('&
��+"�"��
����"#���#����#� �����#�����6'%
����"#���#���#����+��"#����6'&
����"#���#�� ���6'6
�� �#"����$$'4
��#�"���� '�$
������� '�$
�����������+����#"��
����#"���� '!&
+� ����� �#"����$�'6�
�����#"��
��#� "#��6'�
��#"���"�#��#"����6'�
"�#���#"��
�)5025�02)5�� '��
�����#���#�����������#�� '&$
F�� "#�����������#�� '6
�����������������#�� '& �� '!&
"�"������#�"� ���#���#"�� ��� '4�
���#"������#"���"�#��#"���� '!&
���"���������������������$$'%
��� ���"�������#"����('%
�"�#"����������� '&�
����"���� '46�� '4�
���. ��"�� �"���� ��� '4&
����"#���#��6'�
F���#"#���#�����#"����$�' ��$�'66
� ������� '4!
���"����$$'�
F���#"#"�
��������$$' $
��� ���$$' $
������#"��
��#� "#�� '4�
��#"���"�#��#"���� '4�
���#"����F���#"#"���$$'4
��"��"����$$'��
"�+���#"�����'
��""����#�#���$$'
����� "�����'$
�##"���������������#�� '�4
����������*�� '$!
#�#���#�
+"<��� ���#"����('&
��"�. �� ���#"����('&
����.��*+ �������;������"�#��$�' 4�
$�'6&
����#���"���� '
�"��
����"��#�<#�� '��
F���#"#���#�����#"����$�' ��$�'6
��*��"#��:"��������� ��)��"���+���
��"��"��������#"������� "����$$'�4
��*��"#����*����#�������� ��)��"��
+������"��"�����*����#�� �����$$'�!
��*"����"#�����" �." "#��������#�����&'$
��*"����"#��.��*+ ����$�'$���$�'4�
��*"����"#��." ��+���#�"� ��$$' !
��*"����"#������"#���#��6'$
��*"����"#������ �#"����$�'$
��*"����"#�������������#��������� �#
����"����4'$
��*"����"#����������F���#"#"���%'$
��*"����"#��"�#�����." "#���$�'$
��*"����"#��"���������#�"�
�������#��!'$
��*"����"#����#�"� ��������#��!'�
��*"����"#���#������� ����'!
��*"����"#����� ������������
"�+���#"����$$' $
Index
B73.3.1 (6/99)
��*"����"#����*����������#������� �
"�+���#"����$$'$
��*"����"#����*���������� "�����'
��*"����"#����*����������#�
����� ��� '$
Shop Floor Management
B73.3.1 (6/99)