enoia · • pipenet vision spray/sprinkler module (hydraulic steady state design) • pipenet...
TRANSCRIPT
About Us• Multinational Engineering group with offices in
Europe, Africa, GCC and India
• World-class Consulting and Engineering Company
with International Experience
• Experts in Oil & Gas, Refineries, Petrochemicals,
Infrastructure & Mining Projects
• World Leaders in Fiberglass piping Consultancy
Established in 1987, ENOIA is a multi-disciplinary and project management engineering company with a proven track record of 30 years in engineering excellence.
The Group’s global network includes engineering excellence centers in Athens, Cairo, Dubai and Chennai, in addition to local offices in Kuwait, Lebanon, and Abu Dhabi.
ENOIA is structured in 3 sectors: Energy, Water & Infrastructure, and Industrial, providing a comprehensive range of services in diverse markets and industries.
HISTORY“World class Consulting and Engineering Company provides multi-disciplinary engineering services ”
ENOIA Greece
ENOIA Egypt
ENOIA Abu Dhabi
ENOIA Kuwait
ENOIA India
ENOIA Dubai
ENOIA Lebanon
CENTERS OFEXCELLENCE
“World class Consulting and Engineering Company
provides multi-disciplinary engineering services ”
SERVICESProviding the full spectrum of services required for the implementation of a project, including:
Concept / Feasibility
ExecutionDesign /
Engineer. / Tendering
Operation
Fact SheetsENOIA’s Matrix Organization
ENOIA’s global network includes engineering excellence centers in
Athens, Cairo, Dubai and Chennai. Engineering Centers are multi-
discipline structured as follows:
• Process Engineering
• Project Engineering
• Mechanical Engineering
• Machinery (rotating equipment)
• Technological (static equipment)
• Piping Engineering
• Pipelines Section
• Above Ground Section
• Under Ground Section
• Stress Piping Section
• 3D Administration
• Electrical Engineering
• Instrumentation & Control Systems Engineering
• Civil, Structural, Topo, Geotechnical Engineering
• Construction Discipline
• Supporting disciplines (Procurement, Project Control, DocumentControl, QA/QC, HSE)
Fact Sheetsper Engineering Excellence Center
ENOIA Facts per Engineering Excellence Center
OfficeAthens Greece
Chennai India
Dubai U.A.E.
CairoEgypt
Headcount 75 170 30 180
Office space 1,800 m2 1,800 m2 350 m2 1,500 m2
Engineering Mhrs/year
800,000 mhrs(utilizing group’s pool of engineers and additional resources the
total capacity can reach easily 1 million mhrs)
ENOIA Software List
General / Project Management
• Primavera P6• PIMS (Project Information Management System)• Meridian by Blue-Cielo (Electronic Documents Management System)• Microsoft Office Suite
Process Design
Commercial Software• ASPEN HYSYS PROCESS STEADY STATE (Process Simulator Multicomponent
Mixtures with Crude Oil Characterization etc.)• ASPEN HYSYS PROCESS DYNAMIC (Dynamic Process Simulator of Plant-wide
Control Systems)• ASPEN FLARE ANALYZER (ex. FLARENET) (Flare Network Sizing)• ASPEN EXCHANGER DESIGN & RATING (EDR) (Thermal Design, Rating &
Simulation of Shell & Tube Heat Exchangers (ex. TASC), Air CooledExchangers (ex. ACOLPLUS), etc.
• PIPENET VISION SPRAY/SPRINKLER MODULE (Hydraulic Steady State Design)• PIPENET VISION STANDARD MODULE (Hydraulic Steady State Simulator)• PIPENET VISION TRANSIENT MODULE (Hydraulic Dynamic Simulator-Surge)• Bentley Hammer• DNV PHAST (QRA Analysis)• FLARESIM (Flare Stack Radiation Calculation, Sizing & Rating)• PRO-II, DESIGN-II, OLGA etc.
ENOIA Software List (cont’d)
Process Design (cont’d)
In House Software• Visual C++ Standalone Applications
• ChemCalc (Line Sizing, Three Phase Separators Sizing, Water Hammer,Line Insulation & Heat Loss Calculation, Tank Heat Loss Calculation etc.)
• NetCalc (Steady State Hydraulic Analysis of Complex Liquid Networks,Simulation of Pumps, FCV, PCV, Pressure Drop Items etc.)
• Visual Basic Standalone Applications• PumpCalc (Process Pump Calculation and Process Pump Spec Sheet)• PRCCalc Suite (Control Valve & PSV Sizing, API 2000 Tank Normal &
Emergency Vent Sizing etc.)• Excel Sheets enhanced with Visual Basic Code
• Line Sizing and Process Line Summary Lists• Pump Process Calculation• FlareSim (Flare Radiation Calculation API 520)• Control Valve & PSV Sizing• Air Cooler Preliminary Sizing and Rating
ENOIA Software List (cont’d)
Engineering Design (cont’d)
• PV ELITE - INTEGRAPH (FOR VESSELS DESIGN)• CODE CALC - INTEGRAPH• TANK – INTEGRAPH (FOR TANKS DESIGN)• AMETank - TECHNOSOFT (FOR TANKS DESIGN)• CAESAR II• SMART PLANT P&ID• ETAP (POWER SYSTEM STUDIES)• CYME (POWER SYSTEM STUDIES)• CALCULUX/DIALUX• IN-HOUSE DEVELOPED PROGRAMS FOR ELECTRICAL DESIGN:
• CABLE SIZING CALCULATION (EXCEL)• USER LIST (EXCEL)• LIGHTNING CALCULATION (EXCEL)• CABLE LIST (ACCESS)• CABLE GLANDS SUMMARY REPORT (ACCESS)
• SMART PLANT INSTRUMENTATION (SPI)• INSTRUCALC• IN-HOUSE DEVELOPED PROGRAMS FOR INSTRUMENTATION DESIGN:
• CABLE LIST / COIL SCHEDULE (ACCESS)• CABLE GLAND SUMMARY (ACCESS)• INSTRUMENT LIST (ACCESS)
ENOIA Software List (cont’d)
Engineering Design (cont’d)
• STAAD PRO (STRUCTURAL ANALYSIS DESIGN)• STAAD FOUNDATION (FOUNDATION DESIGN)• PROKON (STEEL CONNECTION DESIGN)• RAM (STEEL CONNECTION DESIGN)• TEKLA Structures• FEATOOL
CAD & 3d Design
• AUTOCAD 2013• PDMS (PDMS PIPING, EQUIPMENT, ISOGEN) / AVEVA PLANT• SP3D (SP3D PIPING, EQUIPMENT, ISOGEN)• NAVISWORKS• CADWORKS• PDS (PDS PIPING, EQUIPMENT, RACEWAY, ISOGEN)• MICROSTATION V8i• PLANT DESIGN V8i: (AUTOPLANT MODELLER, PIPING, ISOMETRIC,
EQUIPMENT, ISOGEN)• CADS RC• Bentley Plant Space• Mat 3D
Feed for Offsite, Wellhead Facilities, Gathering System & Export Line for Kurdamir & Topkhana Development Project
Project
Description
Development of Kurdamir (K44) and Topkhana (K39) gas fields
located the Kurdistan Region of Iraq. Overall facilities shall be
capable of exporting 150 MMSCFD of gas, with an ultimate
gas export capacity of 450 MMSCFD. The project includes Well
Pad Facilities, Gathering system, Central Processing Facilities,
Truck Loading Facilities, Storage Tanks & Buildings, Utilities &
Offsite Facilities, Gas Export Pipeline.
Client
Location
J&P – REPSOL
IRAQ (Kurdistan)
Scope of
Service
Front – End Engineering Design (FEED)
Nyayyim ASL Crude Increment Facilities
Project
Description
Installation of a grass roots facility to process an additional 100
MBOPD crude oil, expansion of existing capacity of Remote
Injection Stations (RIS-A and RIS-C).
Upgrading the facilities at Hawtah Stabilizer for additional
crude degassing.
Client
Location
J&P – ARAMCO
Kingdom of Saudi Arabia
Scope of
Service
• Basic Design
• Multi-disciplinary Detailed Engineering
• Procurement Services
• Construction Follow up
Compagnie Des Petroles Total Libya – Mabruk Project – Phase 4
Project
Description
Development of the Great Mabruk Area including the following
facilities:
- New GOSP Plant
- Power Generation Plant and Power Distribution System
- Oil and WaterWells
- Flowlines /Trunk lines.
Client
Location
J&P (Owner: TOTAL Libya)
LIBYA
Scope of
Service
• Basic Design
• Multi-disciplinary Detailed Engineering
• Procurement Services
• Pre-Commissioning/Commissioning procedures
• Operating Manual and Start-up Assistance.
Carbon Holdings Industrial Project Services (CHIPS) Tank Farm,
Jetty and Pipelines (Port Area Facility)
Project
Description
The project refers to the PORT AREA facility serving the TAHRIR
Petrochemical Complex (TPC) and the plants of the Oriental
Petrochemicals Company (exist. OPC-1 and new OPC-2 & 3).
PORT AREA facility via a new jetty will supply feedstock (import
products), fuel oil and desalinated water to TPC and OPC plants
and it will also serve as main storage and export facility of TPC
products.
Desalinated water will be produced via a new sea water intake
facility and water desalination plant in PORT AREA.
Client
Location
ARCHIRODON BV – CARBON HOLDINGS
Egypt
Scope of
Service
• Basic Design
• Font End Engineering Design (FEED)
I/R GOSP SIMULATION AND OPTIMIZATION STUDY
Project Description The project refers to modifications on the process scheme adopted in the FEED design by
Akakus Oil Operations to improve the system performance and simplify the plant operations
by: confirming GOSP max/min inlet fluid temperature, developing I/R GOSP Heat & Material
Balance, improving the condensate handling system and optimizing the GOSP compression
section
Client / Location AKAKUS OIL OPERATIONS (REPSOL) / LIBYA
Scope of Service
• Process Engineering Design Services including optimization and simulation works;
• Preparation of Equipment Process Data Sheets
• Preparation of FEED Process Data Sheet, PFS, UFS and Process Narratives
Shah Gas Development Project – Units 726 & 727
Project
Description
Producing up to 1 billion cubic feet per day (cf/d) of gas to help
boost ADNOC’s output to a targeted 6 billion cf/d.
The gas will primarily be used as feedstock for new power,
desalination and petrochemical plants in Abu Dhabi and the
northern emirates, but some will be re-injected into Abu Dhabi’s
oil fields to maintain reservoir pressure.
Client
Location
SAIPEM – GASCO
ABU DHABI – United Arab Emirates
Scope of
Service
• Multi-disciplinary Detailed Engineering,
• Complete 3D Modeling using Smart Plant 3D,
• 30%, 60%, 90% Model Reviews / Closures
NC-115 & NC-186 GAS UTLIZATION – PHASE II
Gas Compression and Treatment Facilities
Project
Description
Expansion of gas compression and treatment facilities
including:
• A third gas compressor train at NC-115 GOSP
• Two gas compressor trains at NC-186 field
• Interconnecting 10” gas pipeline (30 km) with scrapper
facilities
Client
Location
J&P – REPSOL
LIBYA
Scope of
Service
FEED verification and completion, Hydraulic Calculations and
Pipeline Dynamic Simulation, Detailed Engineering and
Procurement Services.
Abu Dhabi Crude Oil Pipeline - Habshan to Fujairah
Project
Description
Cross Country Pipeline Project (404 km) with Main, Intermediate Pumping
Stations and Main Oil Terminal
Client
Location
Penspen International
United Arab Emirates
Scope of
Service
Multi disciplinary detailed engineering for Main Pumping Station (MPS),
Intermediate Pumping Station (IPS) and Main Oil Terminal (MOT) area
involving:
• Design and detailing of Equipment
• Pipe Stress Analysis
• Piping Calculations
• Piping Layouts
• Pipe Supports and Isometric drawings.
• Civil and Structural Engineering.
• Electrical Engineering.
• Instrumentation and Control Engineering.
Kuwait - Crude Export Pipelines (GC16 and Doha Power Station)
Project
Description
• Crude Oil Pipeline Development for New Gathering Centre (GC-16) at
KOC (Kuwait)
• Export Crude Oil Pipeline from From TL3 to Doha West Power Station (25
km, 20”)
Client
Location
• Combined Group Contracting Company (Owner: KOC)
• Al Ghanim International (Owner: KOC)
Kuwait
Scope of
Service
Multi disciplinary detailed engineering involving:
- various process calculations, preparation of P&IDs
- design and detailing of equipment
- pipe stress analysis, piping calculations, pipe routing and supports, pipe
alignment sheets, isometric drawings
- Civil and Structural Engineering
- Electrical Engineering
- Instrumentation and Control Engineering.
Ceyhan Terminal Expansion
Project
Description
Expansion of the existing petroleum products terminal at Ceyhan.
The expansion includes :
• Twenty nine (29) new storage tanks for white and black products with
capacities ranging from 27.000 m3 to 2.000 m3
• Ship and Truck loading/unloading facilities
• Pump stations, Vapor Recovery Units, Firefighting facilities, Oily Water
Treatment facilities, Utilities (steam, condensates and nitrogen networks)
• Automation / Controls / Telecommunication
• Electrical substation and networks
• Buildings and other civil works.
Client
Location
Delta Rubis
Turkey
Scope of Service Basic Design, Process, Civil, Mechanical, Piping, Electrical, Instrumentation,
Control and Telecommunication Detailed Engineering Design, Bidders’
Technical Evaluation, Vendors’ documentation review and approval, Issue for
Construction Drawings
VTT Vassiliko Oil Terminal and Jetty
Project
Description
Provision of a grass root petroleum products terminal and Jetty including :
• 34 storage tanks for white and black products with capacities ranging from
26.000 m3 to 2.000 m3
• Truck loading/unloading station
• Pump Stations
• Vapor Recovery Units
• Jetty facilities (including 14 No. Marine Loading Arms)
• Firefighting facilities and Oily Water Treatment facilities
• Automation / Controls / Telecommunication
• Electrical substation and networks
• Utilities (Hot Oil package, Nitrogen package, plant air, etc.)
• Buildings and other civil works
Client
Location
J&P – VTTI
Cyprus
Scope of Service Basic Design, Process, Civil, Mechanical, Piping, Electrical, Instrumentation,
Control and Telecommunication Detailed Engineering Design, Bidders’
Technical Evaluation, Vendors’ documentation review and approval, Issue for
Construction Drawings.
Yanbu 2 Power & Water PlantSeawater Cooling Network & Marine Facilities
Project
Description
EPC of Marine Facilities for the new Power & Water Plant, including Seawater
intake and associated pumping station, GRP distribution pipelines, multi-
purpose building, electro-chlorination plant, associated utility distribution
systems, C&I systems, etc.
Client
Location
Archirodon (Owner: MARAFIQ)
KSA
Scope of Service Endorsement of Basic Design provided by client
Process, Mechanical, Piping, Electrical, Instrumentation, and Telecom
Engineering Design
Bidders’ Technical Evaluation, Vendors documentation review and approval
Issue for Construction drawings.
Power Plant – Malaysian LNG, Bintulu Complex
Project
Description
Owned by Petronas, the Malaysian state-owned oil company, the Bintulu LNG
Complex is one of the largest LNG production centers in the world with eight
(8) trains in operation at the complex with a combined capacity of 24 million
tonnes per annum (mtpa).
ENOIA carried out balance of plant engineering services for the Bintulu
combined-cycle power generation plant (capacity 330 MW) for the piping,
mechanical, electrical and civil components of the plant.
Client
Location
NEM (Owner: MALAYSIAN LNG)
Malaysia
Scope of Service Basic Design, Process, Civil, Mechanical, Piping, Electrical, Instrumentation,
Control and Telecommunication.
Detailed Engineering Design, Analysis & 3D Modeling using Smart Plant 3D
(SP3D)
Bidders’ Technical Evaluation
Vendors’ documentation review and approval
Issue for Construction Drawings.
Motor Oil Hellas – Corinth RefineriesRevamping projects
Project
Description
Various Revamping Projects concerning the upgrade of existing
facilities, targeting the actual throughput increase of the various
Units, including Debottleneck solutions, Units’ efficiency and final
products’ improvement. Indicatively ENOIA provided services for
the revamp of the following Units:
• U-200 Distillation Columns Pumparound Circuits
• MTBE Unit 2600 Conversion To ETBE Unit
• DIMERSOL G Unit M-4200
• Heater H-351 Upgrade
• The De-inventory System of U-3700 –
• MEROX Unit U-1400
• Alkylation Unit 3700, RE-5300 HF Mitigation System
• Sea Cooling Water System
• Transfer Pipelines JP-6
• REOF-4087 Jetty Custody Transfer System
Client
Location
Motor Oil Hellas – Corinth Refineries
Greece
Scope of
Service
Licensor Coordination, Basic Design, Detail Engineering Design,
Procurement Services, Cost Estimation, Tendering Servises
Motor Oil Hellas – Corinth RefineriesRevamping projects - U-200 Distillation Columns Pumparound
Project Description
The project concerns the revamp of the Vacuum Unit U-200 Vacuum Columns (Two –Off)
Pumparound Circuits, to operate at actual increased throughput of the Unit. The Scope of Work
involves the Detail Engineering activities required for obtaining in the unit the increased throughput,
based on a preliminary process study already performed.
Replacing of existing Equipment with new:
• Coolers (Vacuum Gas Oil, Vacuum Residue, BG10 Product Air Cooler, etc.)
• Heat Exchangers (Reduced Crude / VGO Heat Exchanger etc.)
• Pumps (BG10 Product, BG20 Product, Asphalt Circuit, BG30 Circuit etc.)
• Flow Valves, Level Control Valves, Temperature Control Valvesand
• Necessary modifications and replacement of a number of lines, due to their inadequacy for the
new flowrates.
Scope of Service Coordination with the Vacuum System Vendor, Finalization of Basic Design, Detail Engineering Design
Multi-Discipline, Thermal Design (STHE/ACHE), Adequacy checking of existing equipment,
Procurement Services, Cost Estimation, Tendering Services, Mechanical Catalogue, Support (HAZOP/
ENOVIA), Project Management Activities.
Motor Oil Hellas – Corinth RefineriesRevamping projects – De-Inventory System of HF Alkylation Unit
Project Description:
Project Concerns the revamp of the HF Alkylation Unit U-3700 rapid HF acid de-inventory system in
order to target an acid dump time (close to 3 minutes).
The new de-inventory system (replacement of the existing obsolete system -HF Dump Drums &piping)
is to be used in conjunction with the existing water application system (i.e. application of water
sprays that will absorb HF and depress HF aerosol cloud formation) to effectively mitigate HF
accidental releases (activation will use the existing HF detection system).
Based on Licensor /UOP Revamp Feasibility Study the main modifications are, while assess the
possible re-use of existing equipment:
• existing HF acid de-inventory piping and existing HF Dump Drums shall be dismantled,
• a new Acid Dump Drum shall be installed,
• new HF acid de-inventory piping and isolation valves shall be provided and
• finally one of the existing pumps will be modified (larger impeller, new motor and new seal) and
relocated next to new Acid Dump Drum to serve as Dump Drum De-Inventory Pump.
Scope of Service:Coordination with the Licensor/UOP, Finalization of Basic Design (Assessment of re use of existing equipment, Check existing Relief Gas Scrubber capacity/ Units Flare Sub-header, Finalization on requirements on fire insulation of the equipment, Detail Engineering Design Multi-Discipline, Adequacy checking of existing equipment, Procurement Services, Cost Estimation, Tendering Services, Mechanical Catalogue, Support (HAZOP/ ENOVIA), Project Management Activities.
Motor Oil Hellas – Corinth RefineriesRevamping projects – MEROX UNIT U-1400
Project Description
The project concerns the revamp and conversion the existing Unit 1400 Jet Fuel/Kerosene Sweetening Unit - MEROX to increase the capacity, to resolve the separationproblems in the pre- and post- treatment sections of the Unit, based on a Feasibility
Study made by others.
The capacity needs of the Unit significantly increasead over the years of operation dueto the increase of capacity of the upstream Unit(s) and to the addition of the newCrude Distillation Unit in the Plant;moreover also the crude oil slate processed by the refinery changed comparedto the original Unit design. In particular, some of the crudes currently handled by therefinery are quite difficult to sweeten due to their high Mercaptan Sulphur andNaphthenic acids content.
Modifications include among others, the operation in two independent trains, newfilters, vessels, heat exchangers, coalescer, and all related Piping, Instrumentation,Electrical and Civil works required for the unit revamping.
Scope of Service
Coordination with the Licensor/ UOP (Merox-Process), Finalization of Basic Design, Detail Engineering Design Multi-Discipline, Procurement Services, Cost Estimation, Tendering Services, Mechanical Catalogue, Support HAZOP, Project Management Activities.
Motor Oil Hellas – Corinth RefineriesRevamping projects – MTBE UNIT 2600 CONVERSION TO ETBE UNIT
Project
Description
The project concerns the revamp and conversion of the
existing MTBE Unit 2600 to become an ETBE unit using as feed
only ethanol, based on a Process Design package by SAIPEM.
The revamp activities considered only for the continuous &
steady state operation in ETBE mode only and not for the
possibility of methanol feed in batch change as initially the FDP
has foreseen.
Modifications include among others installation of new heat
exchangers new pumps, new pressure Safety valves, and all
related Piping, Instrumentation, Electrical and Civil works
required for the unit revamping.
Scope of
Service
Finalization of Basic Design, Detail Engineering Design Multi-
Discipline, Procurement Services, Cost Estimation, Tendering
Services, Mechanical Catalogue, Support HAZOP, Project
Management Activities.
REFINERY TRUCK LOADING TERMINAL
Project
Description
Provision of a Terminal for Black and White Oil products, including :
• Interconnecting with the Refinery
• Storage tanks (14 No.)
• Pump stations (18 No. Pumps)
• Vapor Recovery Unit
• Truck Loading Facilities (Top and Bottom Loading)
• Terminal Automation System and Controls
• Firefighting facilities, utilities, buildings, etc.
Client
Location
MOTOR OIL HELLAS
GREECE
Scope of Service • Project Management,
• Preparation of Plot Plan,
• Conceptual Study,
• Basic Design,
• Permits Acquisition,
• Detailed Engineering,
• Cost Estimation,
• Procurement Services,
• Construction Management & Supervision
HELLENIC PETROLEUM (HELPE) Aspropyrgos Refinery ComplexRevamping projects – Crude Distillation Unit
Project
Description
The project concerned the new HHGO (Heavy-Heavy Gas Oil)
side-stream to the FCC unit, including new HHGO Stripper
pump, and air cooler as well as the related modifications
made on the existing HGO side-stream network upgrading of
preheating train, existing air coolers duty change.
Client
Location
HELPE S.A. Aspropyrgos Refinery Complex
Greece
Scope of
Service
Basic Design, Thermal Design ( Detail Engineering Design Multi-
Discipline, Procurement Services, Cost Estimation, Tendering
Services, Project Management Activities.
HELLENIC PETROLEUM S.A.
THESSALONIKI INDUSTRIAL COMPLEX POLYPROPYLENE PLANT
Project
Description
Provision of a Polypropylene Plant at Thessaloniki Refinery (EKO)
Complex
Client
Location
ASPROFOS – HEL.PE.
GREECE
Scope of
Service
Construction Management and Supervision Services, Inspection
and Quantitative Verification of Delivered Equipment and
Material, Provide Contract Administration Services during the
project construction period, Inspection and acceptance of every
stage and phase of the works Inspection and Verification of
Safety Measures on site as required by the project Safety Health
and Environment (SHE) Plan.
TASNEE PETROCHEMICAL COMPLEX
Project
Description
Three years Contract for General Engineering Services (GES) for
TASNEE Petrochemicals Complex.
Client
Location
TASNEE
AL JUBAIL – KINGDOM OF SAUDI ARABIA
Scope of
Service
The Services performed are grouped in three main categories:
• Engineering Services
(incl. Basic Design and Detailed Engineering, Technical
Procurement Services, Cost Estimation, Vendor follow up etc.)
• PMC Services
• Technical Consultancy Services .
DOW CHEMICALSProject
Description
Selected Revamp/ Modification & Dismantling/disconnecting and re-installationprojects concerning the:
▪ Modification of existing GEL line equipment as well as the new unloading,storage and metering facilities for handling Isopentane and CO2 blowing agentsat the existing STYROFOAM Line 2 production facility at DOW HELLAS Lavrionplant.
▪ Dismantling/disconnecting of the existing L2 installations and fabrication /assembly of skids at DOW HELLAS Lavrion plant & L2 installation works at the newDOW plant in Russia.
▪ E1 – Blowing Agent Conversion & capacity Increase and L2 modification/upgrade of equipment responsible for preparing the polymer foam at theexisting STYROFOAM Line 2 production facility at DILOVASI”, TURKEY – XPS PLANT.
▪ Dismantling/disconnecting of the existing Styrofoam Production Line L1 with allthe required Auxiliaries from multiple other Sites and the re installation at ACCJeddah Plant in Saudi Arabia.
Client
Location
DOW Hellas – Lavrio Plant, GreeceDOW XPS Production Plant – RussiaDOW XPS Production Plant – Dilivasi, TurkeyArabian Chemical Company – Jeddah Plant – KSA
Scope of
Service
The Services performed are grouped in three main categories:• Basic Design for the Auxiliaries (BEP developed by DOW)• Multi discipline Detail Engineering (modular design)• Technical Procurement Services• Procurement Services, Vendor Follow Up• Technical Consultancy Services
DEPA – NATURAL GAS NETWORK
Project
Description
Natural gas distribution networks in various areas and cities for
industrial, domestic and commercial customers (e.g.: Alexandroupolis,
Chalkida, Komotini, Xanthi, Serres, Mitroussi, Lamia, Thiva, Corinth)
Client
Location
DEPA S.A. (Greek National Gas Company)
Greece
Scope of
Service
• Construction Supervision Services for Medium Pressure (MPTS) Natural
Gas Networks
• Detailed Engineering of SCADA System and Telocommunication Systems
• Detailed Engineering, Procurement Services, Construction Follow-up and
Start-up for the Greek / Turkish border Gas Metering Station (EPC
Contractor: AKTOR).
Skouries Mineral Processing Plant
Project
Description
Installation of a Mineral Processing Plant (concentrator and
associated facilities) for processing 8 million tpa of ore andproducing copper concentrate and gold.
Client
Location
HELLAS GOLD – ELDORADO
GREECE
Scope of
Service
• Project Management
• Basic Design
• Licensor coordination and follow-up
• Front End Engineering Design (FEED)
• EPC Tendering
• Procurement Services
• Construction Management and Supervision Services
Ras Laffan Common Cooling Water Project (Qatar)
Project
Description
This project comprises of a common seawater intake, cooling, distribution
and discharge system to serve all existing and future industrial customers at
Ras Laffan Industrial City (Qatar).
It is considered as one of the biggest projects worldwide that involves a
fiberglass piping systems, for a total of 180 km with diameters from 700 mm
to 4,000 mm.
Client
Location
Qatar Petroleum
Qatar
Scope of
Service
• Engineering
• Hydraulic Design
• Surge Analysis
• Stress Analysis
• Finite Element Analysis
• Pipe Support Design
• Third Party FRP Consultancy Services
• Assistance on Site: installation, testing, commissioning supervision
Jubail Industrial Wastewater Treatment Plant Expansion - Stage III
Project
Description
Design, Supply, Erection/Construction, Test on Site, Commission
and put into service the New Plant as Stage III of Marafiq Jubail
Industrial Water Treatment Plant #8, to increase the capacity of
the existing facilities by 55,000 m3 / day.
Client
Location
SETE Energy – MARAFIQ
KSA
Scope of
Service
• Detailed Engineering for Civil/Structural, Mechanical, Electrical,
Instrumentation, Piping
• Technical Support during Construction
Yanbu 2 Power & Water Plant Seawater Cooling Pipelines Network
& Marine Facilities
Project
Description
EPC of Marine Facilities for the new Power & Water Plant, including
Seawater intake and associated pumping station, GRP distribution
pipelines, multi-purpose building, electro-chlorination plant,
associated utility distribution systems, C&I systems, etc.
Client
Location
ARCHIRODON – MARAFIQ
KSA
Scope of
Service
• Endorsement of Basic Design provided by client
• Process, Mechanical, Piping, Electrical, Instrumentation, and
Telecom Engineering Design
• Bidders’ Technical Evaluation
• Vendors documentation review and approval
• Issue for Construction drawings
East Bank Master Plan & Gabal Al Asfar WWTP Expansion Cairo
Project
Description
Update of the East Bank Master Plan and support for the design of
the planned extensions of Gabal Al Asfar main Waste Water
Treatment Plant in Cairo (one of the largest sewage treatment
plants worldwide):
-1st stage to 1.5 million m3/day;
- 2nd stage to 2.0 million m3/day.
Client
Location
SOGREAH France/Construction Authority for Potable Water and
Wastewater (CAPW)
Scope of
Service
• Master plan
• Detailed design
• Feasibility study
• Preparation of tender documents
• Supervision/monitoring of Operation & Maintenance Activities
Waste Water Treatment Plant for Qatar Fertilizer Company, Qatar
Project
Description
Basic & Detailed Engineering Services for Collection, Storage &
Transfer of Waste Water from Q1 & Q2 Plants for Qatar Fertilizer
Company (QAFCO).
Client
Location
Pan Maritime Energy Services
Qatar
Scope of
Service
Basic & Detailed Engineering services including:
• Site Survey and Data Collection
• Process Engineering
• Mechanical & Piping
• Civil / Structural
• Electrical & Instrumentation
• Project Management
Yanbu Industrial Wastewater Treatment Plant - Phase II
Project
Description
Design, Supply, Erection/Construction, Test on Site, Commission
and put into service a new 48,000 m3/day Industrial Wastewater
Treatment Plant at Marafiq Yanbu
Client
Location
SETE Energy – MARAFIQ
KSA
Scope of
Service
• Detailed Engineering for Civil/Structural, Mechanical, Electrical,
Instrumentation, Piping
• Technical Support during Construction
10th of Ramadan City Water Treatment Plant and Transmission Lines
Project
Description
The project included the new WTP with capacity 1,200,000 m3/day
and 2,500 mm Raw Water Transmission Lines from Ismailia WTP with
a total length of 40 km.
Client
Location
Arab Contractors/Construction Authority for Potable Water and
Wastewater (CAPW)
Scope of
Service
• Detailed Design
• Environmental Impact Assessment
• Tender Documents
• Technical Support during Construction
WORLD BANK - Sustainable Rural Sanitation Services Program
(Egypt)
Project
Description
The current Sustainable Rural Sanitation Services Program (SRSSP)
in Egypt improves access to sustainable sanitation service delivery
in about 200 towns/villages in the Delta Governorates of Beheira,
Dakahlia and Sharkia
Client
Location
Ministry of Housing, Utilities and Urban Communities
Egypt - Governorates of Beheira, Dakahlia and Sharkia
Scope of
Service
• Site Survey and Data Collection
• Master Plan & Preliminary Design Services
• Tender Documents
• Works Supervision
• Program Coordination
for a total of 200 towns/villages, 75 waste water treatment plants,
800+ km of sewage networks, 170,000 house connections.
Faqous Water Treatment Plant & Transmission/Distribution Network
Project
Description
Expansion of Faqous water plant from 1200 L/Sec to 2400 L/Sec
and extension of the transmission/distribution pipelines with a total
of 300 km with Diam. 300 mm to 1200 mm including new elevated
tanks
Client
Location
Arab Contractors/National Organization for Potable Water and
Sanitary Drainage (NOPWASD)
Scope of
Service
• Detailed Design
• Master Plan
• Tender Documents
• Technical Support during Construction
Rehabilitation and Extension of the El-Abbasa Water Treatment
Plant and the Distribution Network for El-Sharkia Governorate
Project
Description
Raw water pumping station, distribution shaft, underground
reservoirs, chemical and chlorination equipment, treated water
pumping station, workshops etc
Distribution network of 369 km pipes Ø 300-1200 mm
The works include the rehabilitation of 6 boosting stations, new
elevated reservoirs, 1000-4000 m3, and ground reservoirs with
capacities 4000-20000 m3
Client
Location
National Organization for Potable Water and Sanitary Drainage
(NOPWASD)
Egypt
Scope of
Service
• Data collection
• Surveying
• Engineering design including Hydraulic, Mechanical, Electrical
and Civil
• Preparation of technical specification and tender documents
for both mechanical and electrical equipment and civil work
El Sheikh Zaid Water Treatment Plant
Project
Description
Expansion works of the main water treatment plant in El-Sheikh
Zaid city from 450,000 m3/day to 580,000 m3/day, new 1,000 mm
transmission pipeline (total length 13.5 km) and ground water tank
with a capacity of 22,000 m3
Client
Location
Arab Contractors/Construction Authority for Potable Water and
Waste Water (CAPW)
Scope of
Service
• Detailed Design
• Master Plan
• Tender Documents
• Technical Support during Construction
Belbes Water Treatment Plant and Distribution Networks
Client
Location
National Organization for Potable Water and Sanitary Drainage
(NOWASD)
Egypt
Project
Description
Belbes Water Treatment Plant and distribution networks (more
than 100 km)
Amrya Treatment Plant and Waste Water Collection System
(150.000 m3/D)
Client
Location
Construction Authority for Potable Water and Wastewater (CAPW)
Financed by KFW (German Cooperation Agency)
Project
Description
• Project management
• Construction Supervision
• Claims analysis
• Variation orders approval
Kafr El-Sheikh Water Supply Project
Client
Location
Arab Contractors/Construction Authority for Potable Water and
Wastewater (CAPW)
Scope of
Service
• Master plan and feasibility studies.
• Detailed Design of water distribution systems and water
treatment facilities upgrading.
• Master Plan and Feasibility studies
• Preparation of technical specification and tender documents.
• Construction supervision.
• Management assistance to Kafr El-Sheikh Water Company
(KWC) during project implementation and its operation and
maintenance.
• Operation and maintenance training.
• Institution support, financial management and human
resources development.
Berkit Al Sabah Water Treatment Plant and Distribution Networks
Project Description Detailed design for Berkit Al Sabah WTP (68,000 m3/day) and the related distribution network
(160 km).
Client
Location
National Organization for Potable Water and Sanitary Drainage (NOPWASD)
Egypt
Energy Efficiency and Operations Improvement through OSCAR®
System
Project
Description
OSCAR® is a wastewater treatment process controller patented
by ENOIA partner ETC Engineering that provides optimal Solutions
for Operations Improvement and Cost Efficiency.
The implementation of OSCAR® allowed the following benefits:
- Monza WWTP (600,000 PE) - OPEX savings €700,000/annum
- Mantua WWTP (100,000 PE) - OPEX savings € 60,000/annum; 33%
sludge reduction; 23% energy savings
- Chiari WWTP (50,000 PE) - Complete WWTP automation and
optimization.
OSCAR® was already successfully implemented in over 30 plants
in Italy.
Client
Location
Numerous Water Utilities
Italy
Scope of
Service
• Process control on WWTPs in operation
• Identification of solutions for operations improvement, energy
saving, plant upgrade