english sma - procedure text (how to make origami crane)
TRANSCRIPT
SOSIAL FUNCTION :To tell how make the origami crane
MATERIAL :
A Square sheet of paper
1.
2. Unfold, and fold in half the other way.
Fold the paper in half, into a rectangle.
1. Unfold your rectangle. Turn the paper over and fold in halfinto a triangle. You should see the back of your paper. Unfoldand repeat along the other diagonal.
2. Unfold your paper and turn it back over. You should see thediagonal creases create”valley” and the perpendicular creasescreate”mountains”
1
2
3. Bring the corners together. Allow the valley creases to meet in the middle.
4. Align the square. By flattening two opposite sides, you should find yourself with a square that is open on the bottom. Make sure your square is rotated so that the opening is on the bottom, as shown in the picture.
5. Bring the right corner of the top flap to the middle crease, sothat the lower right edge lines up with the crease.
6. Repeat this action on the left, so that the top looks like a kite
7. Fold down the top corner tomake the crease lie along thehorizontal line created in theprevious two steps.
8. Unfold. In doing so, you returnto having a square with anopening facing down.
9. Take the bottom corner of the square and start to fold it up along the horizontal crease you made in the previous two steps.
10. As you fold, note the four diagonal creases on the inside that you made earlier. You will need to reverse the two creases on the upper flap. To reverse a crease, fold it in the opposite direction that it naturally folds.
11. Bring the outer edges to the middle and flatten, so that you have a diamond.
12. Turn your paper over, and repeat the previous five steps.
13. Fold the edges to the middle crease.
14. Repeat on the other side
13 14
15. Take the bottom tip of the top flap and fold it up to the top corner. Turn over and repeat on the other side.
16. Fold the right flap over to the left (in the same manner as turning the page of a book). Turn over and repeat on the back. Now the head and tail are nestled in between what will become the wings.
17. Fold the wings down so that they are perpendicular to the body, head and tail.
18. Fold the tip of the head down.
19. Pull the head and tail out so that they line up with the outer edges of the body.
ORIGAMI CRANE IS COMPLETE