engineering projects ( india ) ltdengineeringprojects.com/tender/uploadfiles/3228_vol-iii.pdf ·...
TRANSCRIPT
AN ISO 9001 & 14001 COMPANY
TENDER DOCUMENT
TENDER No: DLI/CON/710/563
FOR
“External & Internal Electrical works including Supply, Installation, Testing & Commissioning of Transformers, Electrical HT/LT Panels, Air-conditioning & Fire Fighting works for 1st Phase (B+G+IV) of Administrative Building of New
Town Kolkata Development Authority at Plot No. DG/13, Premises No.04-3333, Action Area – 1D, New Town, Kolkata”.
VOLUME – III
PRICE BID/ BILL OF QUANTITY
Tender No: DLI/CON/710/563 Dated 13.02.2017
In figures In words In figures In words
1
External & Internal Electrical works
including Supply, Installation,
Testing & Commissioning of
Transformers, Electrical HT/LT
Panels, Air-conditioning, Generators
& Fire Fighting works for 1st Phase
(B+G+IV) of Administrative Building
of New Town Kolkata Development
Authority at Plot No. DG/13,
Premises No.04-3333, Action Area –
1D, New Town, Kolkata.
BIDDER'S FINANCIAL OFFER : Rs. (In Figure)
Rupees (In Words)
SL.
No.
Tender for External & Internal Electrical works including Supply, Installation, Testing & Commissioning of
Transformers, Electrical HT/LT Panels, Air-conditioning, Generators & Fire Fighting works for 1st Phase
(B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises
No.04-3333, Action Area – 1D, New Town Kolkata.
QUOTING SHEET
AMOUNT IN Rs. (after adding percentage
above, at par or below)
Rs. 7,13,23,260.00
(Rupees Seven
Crores Thirteen
Lakhs Twenty Three
Thousand Two
Hundred and Sixty
Only)
Seal & Signature of Bidder
DESCRIPTION ESTIMATED COST
(IN Rs.)
BIDDER'S PRICE
% QUOTE ABOVE /AT PAR/ BELOW
Engineering Projects (India) Ltd. (A Govt. Of India Enterprise)
Abstract Sheet
Tender No: DLI/CON/710/563
Tender for “External & Internal Electrical works including Supply, Installation, Testing & Commissioning of Transformers, ElectricalHT/LT Panels, Air-conditioning& Fire Fighting works for 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises No.04-3333, Action Area – 1D, New Town Kolkata”.
Total Estimated Value: Rupees .Seven Cores thirteen lakh twenty thousand two hundred sixty only.
Note : The above prices are including of all taxes and duties etc..
Sl.No. Item Description Value(in Rs.)
1 HT Sub-Station 10997060.42
2 Generator & AMF panel 9619588.29
3 Air condition system with VRF 24635119.00
4 Compound Lighting 5470262.29
5 Fire 14812025.25
Total 65510055.25
Add Tender Premium-1 @ 8.44% 5529048.66
Total 71039103.91
Add Tender Premium-2 @ 0.40% 284156.41
Total= 71323260.32
Say= 7,13,23,260.00
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
1 ELECTRICAL SECTION -I ( Sub Station)
Transformer & Accessories
Supply, installation, testing and commissioning of 750KVA, 11/0.433KV, 3 Phase, 4 wire, 50 Hz, ONAN transformer for indoor
duty with a -20% to +5% Off-load tap changer in the step of 1.25%, cable box at primary and secondary end with double float
buchholz relay protection, high winding & oil temparature sensors - Alarm & Trip, and at neutral earthing conductor with
control cabling from transformer to HT Breaker (to trip primary breaker) complete with all fittings, interconnection of control
cables and accessories , first filling of oil as per detailed technical specifications and as required.(Voltamp / ABB / Areva / Tesla)
2 Set 1,499,432.87 2,998,865.74
HT Panel
Supply, delivery, erection, testing and commissioning of Three (3) panel, 630 Amps, 11KV, 3-Phase, 50HZ, metal clad, dead
front, 350MVA rupturing capacity Vacuam Circuit Breaker as per the detailed specifications and drawings including
connections, etc. complete with following incommers and outgoings as required.(Siemens / ABB / Areva)
Incommer:
1 No. VCB Pannel having the following.
1 No. 630A, 11KV, 3 Phase, 50HZ, metal clad, dead front, 350 MVA rupturing capacity, Fully drawout type , Vacuum Circuit
Breaker(Breaker Breaking capacity -25KA).
1 No. 11KV/110V resin cast Potential Transformer with HRC fuses.having accuracy class-1 for metering
1 set of Phase indicating lamp with HRC fuses.
1 No. 0-15KV voltmeter with selector switch
1 set of indicating lamps to indicate ON,OFF,TRIP ,Spring Charge & TRIP CIRCUIT HEALTHY.)
2 No. Push Buttom for CLOSE and TRIP.
1 no.Trip /Neutral/Close Switch
1 no.Local/Remote Switch
1 No. 100/5-5A Current Transformer for metering and protection(accuracy class-
-0.5 for metering & 5P10 for protection)
1 No 0-100 Amps ammeter with selector switch.
1 set of CDG 61(2 No.O/C, 1 No. E/R relay (electromagnetic/electrostatic)
1 set of Undervoltage relay and Overvoltage relay.(Electromagnetic)
1 no 30V DC shunt trip coil & 1 no.30V DC closing coil.
1 No. Master Trip relay.(Electromagnetic)
1 No. Power factor meter.
1 no.Trivectormeter
1 no.Frequency Meter
Busbar:
11 KV, 350 MVA, 800 Amps Three Phase busbars of Cu.for Incomer & Outgoing
2 nos.Outgoings:
1 No. VCB Pannel having the following
1 No. 630A, 11KV, 3 Phase, 50HZ, metal clad, dead front, 350 MVA rupturing capacity, Fully drawout type , Vacuum Circuit
Breaker(VCB breaking capacity -25KA)
1 set indicating lamps to indicate ON, OFF, TRIP, SPRING CHARGED, TRIP CIRCUIT HEALTHY.
2 No. Push Buttom for CLOSE and TRIP.
1 no.Trip/Neutral/Close Switch
1 no.Local/Remote Switch
1 No. 50/5-5A Current Transformer for metering and protection.
1 No 0-50 Amps ammeter with selector switch.
1 set of CDG 61(2 No.O/C, 1 No. E/R relay (Electromagnetic/electrostatic).
1 No Master Trip Relay(Electromagnetic).
2 Set ofAuxiliary relay Buchholz,Oil & winding temp Protaction with alarm and trip signals.(Electromagnetic)
1 no.buzar with Push Buttor for common to the Switchboard
H.T. Panel as mentioed above
Electrical Interlocking between HT,LT & Generator set will be done accordingly as per scheme.Necessary scheme will be
intimated at the time of drawing approval.
3 Battery Chager:
Supply, delivery, erection, testing and commissioning of the battery charger panel complete with battery control cabling, etc.
as required.
Rate shall also include provision of minimum 200 AH 30/24 volt SMF.
VRLA Battery including Float cum Boost Thyrister/IGBT controlled.
battery charger with one no. as Hot standby suitable for operation at
240 volt AC 50 Hz supply,
1 No. AC Voltmeter (0 - 500 Volt).
1 No. DC Voltmeter.
1 No. DC Ammeter.
1 set of AC and DC indicating lamps.
1 No. DC Battery charging position indicator.
DCDB with 63A DP MCB as incomer and 16 nos SP MCB as outgoing complete as per specifications and suitable to above.
Control cabling between DC Distribution panel to the HT panel of the Substation with cable size 4C X 2.5 Sqmm. Copper cable.
Battery Charger Panel as mentioned above
1 set 223,948.31 223,948.31
4 Safety Equipments
Supply and laying of 12 KV grade, 12mm, 1 metre wide anti skid chequered type rubber mat.100 sqmm 869.61 86,961.00
5 Supply and laying of 1.1 KV grade 12mm, 1 metre wide anti skid chequered type rubber mat. 500 sqmm 417.13 208,565.00
6 Supply and installation of Fire Buckets 13 litre capacity 4 Nos. duly filled with sand and GI pipe support stand for these buckets
including painting, etc. complete as required.4 Set 1,457.43 5,829.72
7 Supply and fixing shock treatment chart in English, Hindi and local language mounted on 5mm. Thick plywood and 3mm. Thick
plain glass front complete as required.4 Set 325.22 1,300.88
8 Supply and fixing of ISI marked 6.5 kg Co2 type portable fire extinguisher with necessary clamps, supports and trolley in Panel
room approved by ISI complete as required. 6 Set 7,374.01 44,244.06
ENGINEERING PROJECTS (INDIA) LIMITED
( A GOVT OF INDIA ENTERPRISE )
Name of the Work : Construction of 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises No. 04-3333, Action Area - 1D, New Town
Kolkata
Tender No: DLI/CON/710/563
BILL OF QUANTITIES
1 set 1,716,938.39 1,716,938.39
2
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
9 Supply, storing, handling and fixing in position First Aid Medical Box and an 'Artificial Respirator' complete as per technical
specifications as required.5 Each 522.17 2,610.85
10 Supply and testing of 11KV ISI marked hand gloves 2 Each 517.12 1,034.24
11 Supply, installation, testing and commissioning of self contained emergency light unit consisting of 1X20 watt fluorescent tube
and dry type SMF battery for 1 hour backup complete as required.2 Each 2,012.93 4,025.86
12 H.T. Cables
Supply, laying, testing and commissioning of following sizes of 11KV grade multicore aluminium conductor XLPE armoured
power cable directly in duct/hume pipe as per IS : 7098(contractor to measure exact required quantity before supply as per
installation position) (Nicco / Polycab)
12.1 3C X 240 Sq.mm. 200 M 2,421.98 484,396.00
12.2 3C X 120 Sq.mm. 69 M 1,498.84 103,419.96
13 H.T. Cable Terminations.
Supplying and making end termination with heat shrinkable jointing kit(outdoor type) with Raychem kits complete with all
accessories including lugs suitable for following size 3 core, XLPE aluminium conductor cable of 11KV grade as required.
13.1 3C X 240 Sq.mm. 1 Each 19,311.20 19,311.20
13.2 3C X 120 Sq.mm. 1 Each 19,311.20 19,311.20
14 Supplying and making end termination with heat shrinkable jointing kit(indoor type) with Raychem kits complete with all
accessories including lugs suitable for following size 3 core, XLPE aluminium conductor cable of 11KV grade as required.
14.1 3C X 240 Sq.mm. 3 Each 12,401.79 37,205.37
14.2 3C X 120 Sq.mm. 4 Each 11,852.35 47,409.40
15 Supply and laying of following sizes non pressure NP2 class(light duty) RCC pipe(300mm) with collar joint with stiff mixture of
cement (1-cement : 2-fine sand) including testing the joints, etc. as per specification and required. 15 Metre 792.85 11,892.75
15.1 Cable Tray
Supply and Erecting of perforated type Hot dip G.I. cable tray of 14G of specific dimensions. The cable tray shall be hung from
ceiling/ fixed to wall with necessary ceiling suspensors, tee, nots, nuts etc, together with tees, bends etc. All necessary
required hard ware for mounting cable tray along with fabricated supports as per site condition shall be included in cable tray
rate. The tray shall be continuously earthed with included in cable tray rate. The tray shall be continuously earthed with 25 x 6
mm GI Flat. The cost of GI Flat shall be included along with cable tray rates complete as per specification.(Rattan Eng.)
15.2 150 x 75 mm 200 Meter 909.00 181,800.00
15.3 300 x 75 mm 150 Meter 1,616.00 242,400.00
16 LT CABLES
Supply, Laying of cables on cable trays/Hume pipes/structural supports/underground and cable supports provided, include
unloading, shifting upto site. The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated
out of GI strip 3 mm thick. (NICCO /POLYCAB /SKYTONE / NATIONAL / GLOSTER/ECKO)
16.1 4C X 16Sq.mm. - Al stranded for Substation & lighting panel 350 Metre 197.96 69,286.00
16.2 3.5C X 300Sq.mm. - Al for FIRE PNL & Rising Main 160 Metre 1,356.43 217,028.80
16.3 3.5C X 400Sq.mm. - Al for trf, capacitor pnl, VRF & DG Set 550 Metre 1,732.15 952,682.50
17 LT Cable Terminations: Supplying & fixing of double compression type Brass glands & making joint with necessary AL. / CU.
crimping socket of long neck type connecting the same to various equipment like section pillar, switch, starter, motor etc. for
the following sizes:(COMET/ CONNECT WEL/ DOWELS)
17.1 4C X 16Sq.mm. - Al 4 End 104.54 418.16
17.2 3.5C X 300Sq.mm. - Al 8 End 631.76 5,054.08
17.3 3.5C X 400Sq.mm. - Al 32 End 631.76 20,216.32
18 Supplying & finishing cable ends with necessary AL. / CU. crimping socket of long neck type connecting the same to various
equipment like section pillar, switch, starter, motor etc. for the following sizes:(COMET/ CONNECT WEL/ DOWELS)
18.1 4C X 16Sq.mm. - Al 4 Set 99.99 399.96
18.2 3.5C X 300Sq.mm. - Al 8 Set 1,422.59 11,380.72
18.3 3.5C X 400Sq.mm. - Al 32 Set 2,111.91 67,581.12
DISTRIBUTION PANEL
Main L.T panel complete as per Technical Specifications/ data sheets/ SLD and applicable standards.
Supply, delivery, erection, testing and commissioning of LT Panel, cubicle type, totally enclosed, free standing type, dust, damp
and vermin proof panel made up of 14 SWG CRCA sheet, complete with copper busbars, danger notice plate, interconnections
with suitable capacity copper leads / solid copper strips/rods, necessary interlocking, power coat painted and having incoming
and outgoing switchgears as mentioned below and complete as per technical specifications and as required.
1. All ACBs shall have 5 NO + 5 NC contacts
2. All relays to operate at 240Volts, Single phase, 50Hz, AC supply through UPS
Incommer:
2 Nos. ACB Panels each having following.
1 No. 1250A, 415/500V, Rated service short circuit rupturing capacity (Ics) 50 KA, Motorised, Fully Drawout type(EDO), Four
Pole, Air Circuit Breaker with microprocessor based overload, short circuit & earth fault trip including under voltage release
and lockable trip push button. ACB should have Icw=50KA for 1 sec.(L&T / ABB )
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for ACB
Push button to CLOSE the ACB.
R, Y, & B Phase indicating lamps with 2A control SP MCBs
1000/5A CTs with CT shorting links for power factor inprovement panel suitable for giving signal to APFCR at less than 10% of
secondary ratio current.
All Incoming ACBs shall have multi function meter - parameters - digital multifunction meter EM6400 or equivalent shall
indicating A / V / KWH / PF / FREQ / DM / VAR with RS-485 port with suitable CTs, CT shorting links.
Busbar:
Set 2,327,487.43 2,327,487.43
19
1
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
2000 AMP,50KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current ratio shall be 1 sq mm = 0.8 A.
Buscoupler:
1 Nos. ACB Panels each having following.
1 No. 1250A, 415/500V, Rated service short circuit rupturing capacity (Ics) 50 KA, Motorised, Fully Drawout type(EDO), Four
Pole, Air Circuit Breaker with microprocessor based overload, short circuit, Instanteneous & earth fault trip including under
voltage release and lockable trip push button. The ACB should have Icw=35KA for 1 sec.(L&T / ABB ).
1 set of indicating lamps to indicate OPEN, CLOSE, TRIP
Push button to CLOSE the ACB
1 set of meter with ASS and CTs
OUTGOINGS:
5 No. MCCB as per following details / specifications:
630 Amps, 415V, 50KA(Ics) FP MCCB with variable current settings of 0.4 to 1.0 In and having microprocessor based O/L, S/C &
E/F protection release.(Legrand / L&T /ABB/Havells)
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for MCCB..
R, Y & B Phase indicating lamps (LED type) with 2A control SP MCBs
3 No. MCCB as per following details / specifications:
500 Amps, 415V, 35KA(Ics) FP MCCB with variable current settings of 0.4 to 1.0 In and having microprocessor based O/L, S/C &
E/F protection release.(Legrand / L&T /ABB/Havells)
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for MCCB
R,Y & B phase indicating lamps(LED type)with 2A control SP MCBs.
2 No. MCCB as per following details / specifications:
250 Amps, 415V, 25KA(Ics) FP MCCB with thermal magnetic release having variable current settings of 0.4 to 1.0 In.(Legrand /
L&T /ABB/Havells)
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers.
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for MCCB.
R, Y & B Phase indicating lamps (LED type) with 2A control SP MCBs.
2 No. MCCB as per following details / specifications:
150 Amps, 415V, 25KA(Ics) FP MCCB with thermal magnetic release having variable current settings of 0.4 to 1.0 In.(Legrand /
L&T /ABB/Havells)
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers.
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for MCCB.
R, Y & B Phase indicating lamps (LED type) with 2A control SP MCBs.
2 No. MCCB as per following details / specifications:
100 Amps, 415V, 25KA(Ics) FP MCCB with thermal magnetic release having variable current settings of 0.4 to 1.0 In.(Legrand /
L&T /ABB/Havells)
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers.
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for MCCB.
R, Y & B Phase indicating lamps (LED type) with 2A control SP MCBs.
4 No. MCCB as per following details / specifications:
63 Amps, 415V, 25KA(Ics) FP MCCB with thermal magnetic release having variable current settings of 0.4 to 1.0 In.(Legrand /
L&T /ABB/Havells)
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers.
Indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for MCCB.
R, Y & B Phase indicating lamps (LED type) with 2A control SP MCBs.
All Outgoing MCCBs shall have multi function meter - parameters - digital multifunction meter shall indicating A / V / KWH
with RS-485 port with suitable CTs, CT shorting links.
ASS/VSS : Make - KAYCEE/ L&T.
Main LT Panel as mentioned above (T/N/C switch should be provided all the Incomer/Outgoing/Buscoupler panel)
Electrical Interlocking between HT,LT & Generator set will be done accordingly as per scheme.Necessary scheme will be
intimated at the time of drawing approval.
19.3 Capacitor Panel (250 KVAR)
Supply, installation, testing, and commissioning of M.V. cubicle type, 14 SWG CRCA Sheet, totally enclosed free standing type,
dust, damp and vermin proof capacitor panel complete with busbars, M.V. danger notice plate, ammeter, ammeter selector
switch, indicating lamps, CT's , Extra heavy duty capacitors suitable for non linear loads upto 20% (L&T model MD-XL or
equivalent), contactors suitable for capacitor switching(current limiting contactor circuit to supress switching inrush current)
interconnections with suitable capacity aluminium leads / solid aluminium strips, rods, connection of incoming and outgoing
cables with thimbles, stove enamelled painted and having following incoming and outgoing switchgears complete as required.
Incommer:
1No. 500A, 415/500V , 35KA rupturing capacity, FP Moulded Case Circuit Breaker with thermal magneticx release having
varible current setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock facility. MCCB should have
spreader links & phase barriers.
1 set of phase indicating lamps with HRC fuses.
Incoming MCCB shall have multi function meter - parameters - digital multifunction meter shall indicating A / V / PF / VAR with
RS-485 port with suitable CTs, CT shorting links.
Busbar:
630 AMP,35KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current ratio shall be 1 sq mm = 0.8 A
Outgoings:
1 No. 100 KVAR capacitor bank each with 250 Amps TPN MCCB, 250A TP contractor suitable for capacitor switching with push
buttons and indicators.(Legrand / L&T /Havells)
Set 2,327,487.43 2,327,487.43
2 Set 430,027.70 860,055.40
19
1
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
1 No. 50 KVAR capacitor bank each with 125 Amps TPN MCCB, 100A TP contractor suitable for capacitor switching with push
buttons and indicators.(Legrand / L&T /Havells) suitable for capacitor switching with push buttons and indicators.(Legrand /
L&T /Havells)
1no.40KVAR capacitor bank each with 100Amps TPN MCCB,100A TP contractor suitable for capacitor switching with push
button and indicators (Legrand/L&T/Havells)
1 No. 30 KVAR capacitor bank each with 63 Amps TPN MCCB, 63A TP contractor suitable for capacitor switching with push
buttons and indicators.(Legrand / L&T /Havells)
1 No. 20 KVAR capacitor bank each with 63 Amps TPN MCCB, 63A TP contractor suitable for capacitor switching with push
buttons and indicators.(Legrand / L&T /Havells)
1 No. 10 KVAR capacitor bank each with 32 Amps TPN MCCB, 32A TP contractor
suitable for capacitor switching with push buttons and indicators.(Legrand / L&T /Havells)
1 No. Electronic type, microprocessor based, Automatic power factor correction relay in 8 steps
10,973,060.42
2 Set 430,027.70 860,055.40
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
1 Electrical Section II (Generator & AMF Panel )
LT cables
Supply ,Laying of cables on cable trays/Hume pipes/structural supports/undergrounds and
cable supports provided ,include unloading ,shifting upto site.The scope includes clamping of
cables by ready made G.I spacers,saddles or clamps fabricated out of GI strip 3 mm
thick.(Polycab/Havells/KEI)
3.5CX400sq.mm -for DG set
650 Metre 1,732.51 1,126,131.50
2 LT Cable Terminations
Supplying & fixing of double compression type Brass glands & making joint with necessary AL. /
CU. crimping socket of long neck type connecting the same to various equipment like section
pillar, switch, starter, motor etc. for the following sizes:(COMET/ CONNECT WEL/ DOWELS).
3.5C X 400Sq.mm. - Al
32 End 631.76 20,216.32
3 Supplying & finishing cable ends with necessary AL. / CU. crimping socket of long neck type
connecting the same to various equipment like section pillar, switch, starter, motor etc. for the
following sizes:(COMET/ CONNECT WEL/ DOWELS).
3.5C X 400Sq.mm. - Al32 End 2,111.91 67,581.12
DG Set & accessories
Supply, installation, testing and commissioning of sound proof 750 KVA Diesel Generator set
comprising of water cooled radiator type, Diesel Engine with rated capacity of suitable BHP at
1500 rpm, direct injection type, 4 stroke, with suitable no. cylinders coupled to 750 KVA
brushless type 415 Volts, 50HZ, self exciting Alternator with suitable size of flexible coupling
and following main components, complete with all accessores conforming to technical
specifications and as required. Make :Kirloskar.
Cooling System : water cooled radiator type.
Exhaust System : Pipe, Chimney, silencer and supports (as approved by Pollution Control Board
/ Local Authorities ).
Fuel system : Day tank (990 litres-2 nos.) and their interconnecting piping system.
Lube oil system.
Air system.
Electronic Governer.
Starting System.
Coupling arrangement.
safety controls.
Instrument panel for engine.
Control panel with metering, interlocks and annunciations complete as per specifications.
Batteries, Boost and trickle battery charger.
Provision of Busduct connection from alternator terminals to AMF Panel, control cable, neutral
and equipment earthing complete as required.
Spring loaded cushy pads, foundation bolts, etc
Making cement concrete foundation with 1:2:4(1 cement ,2 course sand,4 graded
stone aggregate 40mm nominal size)suitable for DG set as perr recommendation of
manufacturer .
Sound proof canopy with openable doors,fresh air fans,control panel,as per requirement of
Pollution Control Board
All other minor civil,mechanical works including material supply and electrical works complete
as required..
This includes protection relays, meters etc complete. control cabling from AMF
DG set mentioned as above panel.
panel to DG set & LT panels is deemed to be included in this item.
AMF - PANEL (FOR 750 KVA ABOVE DG SET)
Supply, installation, testing and commissioning of M.V. cubicle type totally enclosed free
standing type, dust, damp, and vermin proof capacitor panel complete with busbars, M.V.
damper notice plate, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch,
PF meter indicating lamps, CTs,
interconnections, interlocking between two feeders and bus coupler, with suitable capacity
aluminium leads / solid alumionium strips / rods, connection of incoming & outgoing cables
with thimbles, stove enamelled painted and having following incoming and outgoing
switchgears and as per technical bapecifications & as required.
1 Set 8,405,659.35 8,405,659.35
4
ENGINEERING PROJECTS (INDIA) LIMITED
( A GOVT OF INDIA ENTERPRISE )
Name of the Work : Construction of 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises No. 04-3333,
Action Area - 1D, New Town Kolkata
Tender No: DLI/CON/710/563
BILL OF QUANTITIES
1 No. ACB Panels each having following.
1 No. 1250A, 415/500V, rated service short circuit rupturing capacity (Ics) 50 KA, mororised,
fully drawout type(EDO), four pole, Air Circuit Breaker with microprocessor based overload,
short circuit & earth fault trip including under voltage release and lockable trip push button
ACB should have Icw=50KA for 1 sec.
1 set of indicating lamps with 2A protection MCBs to indicate OPEN, CLOSE, TRIP for ACB.
Push button to CLOSE the ACB.
R, Y & B Phase indicating lamps (LED type) with 2A control SP MCBs.
Incoming ACB shall have multi function meter - parameters - digital multifunction meter shall
indicating A / V / KWH with RS-485 port with suitable CTs, CT shorting links.
AMF Cubicle
1 No. frequency meter (45-55 HZ.)
1 set under voltage relay.
1set over voltage relay.
1 set under frequency relay.
1 set of Master trip / supervisory relay.
1 set of battery charger (with tricle and boost charger.).
1 set of DC voltmeter and ammeter.
1 set of Reverse power and Reactive power relay.
1 set R, Y, B, Breaker ON/OFF & other fault indication lamps.
1 set 8 window Alarm annunciator with separate hooter, accept, reset and rest push button.
1 No. Hooter.
1 No. Engine Cranking Relay.
1 set of Main supply voltage monitor, alternate voltmeter monitor and Engine starting relays.
1 set of Auxiliary relays, timer, push button and control fuses.
ENCLOSURE
Fabrication, PVC sleeving, control/ power wiring and necessary hardware for complete AMF
Panel
Total of DG Set & AMF Panel.
Electrical Interlocking between HT,LT & Generator set will be done accordingly as per
scheme.Necessary scheme will be intimated at the time of drawing approval.
9,619,588.29
1 Set 8,405,659.35 8,405,659.35
4
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
1.0 Electrical Section III ( AIR-CONDITIONING SYSTEM)
Supply, Laying of cables on cable trays/Hume pipes/structural supports/underground and cable
supports provided, include unloading, shifting upto site. The scope includes clamping of cables
by ready made G.I. spacers, saddles or clamps fabricated out of GI strip 3 mm thick.
(KEI/POLYCAB /Havells)
0.00
1.1 3.5C X 95Sq.mm. - Al basement ventilation PNL 120 Metre 532.27 63,872.40
1.2 3.5C X 400Sq.mm. - Al for VRF PNL 550 Metre 1,732.51 952,880.50
2.0 LT Cable Terminations
Supplying & fixing of double compression type Brass glands & making joint with necessary AL. /
CU. crimping socket of long neck type connecting the same to various equipment like section
pillar, switch, starter, motor etc. for the following sizes:(COMET/ CONNECT WEL/ DOWELS)
2.1 3.5C X 95Sq.mm. - Al 6 End 324.21 1,945.26
2.2 3.5C X 400Sq.mm. - Al 32 End 631.76 20,216.32
3.0 Supplying & finishing cable ends with necessary AL. / CU. crimping socket of long neck type
connecting the same to various equipment like section pillar, switch, starter, motor etc. for the
following sizes:(COMET/ CONNECT WEL/ DOWELS)
3.1 3.5C X 95Sq.mm. - Al 6 End 349.97 2,099.82
3.2 3.5C X 400Sq.mm. - Al 32 End 2,111.91 67,581.12
VRF Main Panel
Supply, installation, testing and commissioning of following outdoor type with sloping canopy
on the top, double door, M.V cubicle type totally enclosed, 14 SWG CRCA Sheet, IP-54
protected, free standing type, dust, damp and vermin proof, Distribution Board/Panel complete
with busbars, M.V. danger notice plate, interconnections with suitable capacity aluminium
leads/solid aluminium strips/rods, connection of incomming and outgoing cables with thimbles,
powder coat painted and having following incoming and outgoing switchgears complete as
required.
Incommer:
630 Amps, 415V, 50KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock
facility. MCCB should have spreader links & phase barriers.
1 set of phase indicating lamps with 2A SP control MCB.
Incoming MCCB shall have multi function meter - parameters - digital multifunction meter shall
indicating A / V with RS-485 port with suitable CTs, CT shorting links.
Busbar:
1000 AMP,50KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current ratio shall
be 1 sq mm = 0.8 A
Outgoings:
4 sets of the following:
150 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
1 set of phase indicating lamps with 2A SP control MCB.
1 No. 0-200 Amps ammeter with selector switch and CT's 200/5A.
3 sets of the following:
100 Amps, 415V, 10KA(Isc), FP MCCB with phase indicating lamps.
1 set of phase indicating lamps with 2A SP control MCB.
1 No. 0-100 Amps ammeter with selector switch and CT's 100/5A.
2 sets of the following:
63 Amps, 415V, 10KA(Isc), FP MCB with phase indicating lamps.
1 set of phase indicating lamps with 2A SP control MCB.
1 No. 0-100 Amps ammeter with selector switch and CT's 100/5A.
All MCBs are C-series type.
1 Set 266,640.00 266,640.00
4.0
ENGINEERING PROJECTS (INDIA) LIMITED
( A GOVT OF INDIA ENTERPRISE )
Name of the Work : Construction of 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises No. 04-
Tender No: DLI/CON/710/563
BILL OF QUANTITIES
Basement Ventilation Panel:
Supply, installation, testing and commissioning of following M.V cubicle type totally enclosed,
14 SWG CRCA Sheet, IP-54 protected, free standing type, dust, damp and vermin proof,
Distribution Board/Panel complete with busbars, M.V. danger notice plate, interconnections
with suitable capacity aluminium leads/solid aluminium strips/rods, connection of incomming
and outgoing cables with thimbles, powder coat painted and having following incoming and
outgoing switchgears complete as required.
Incommer:
150 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock
facility. MCCB should have spreader links & phase barriers.
1 set of phase indicating lamps with HRC fuses.
Incoming MCCB shall have multi function meter - parameters - digital multifunction meter shall
indicating A / V with RS-485 port with suitable CTs, CT shorting links.
Busbar:
200 AMP,25KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current
ratio shall be 1 sq mm = 0.8 A.
Outgoings:
3 set of the following (Axial flow exhaust fan).
32 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock
facility. MCCB should have spreader links & phase barriers.
1 No. 3 Phase, DOL Starter for 7.5KW, pump motor with TP contactors, thermal overload relay,
Timer, Local Push Push Buttons and Auto-manual selector switch.
Single Phase preventer.
1 set of phase indicating lamp bwith 2A SP control MCBs.
Indicating Lamps for ON / OFF / TRIP indication with 2A SP control MCBs.
1 No. 0-100 Amps ammeter with selector switch and CT's 100/5A.
4.4 7 set of the following (Jet Fan)
32 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock
facility. MCCB should have spreader links & phase barriers.
1 No. 3 Phase, DOL Starter for 3.7KW, pump motor with TP contactors, thermal overload relay,
Timer, Local Push Push Buttons and Auto-manual selector switch.
Single Phase preventer.
1 set of phase indicating lamp with 2A SP control MCBs.
Indicating Lamps for ON / OFF / TRIP indication with 2A SP control MCBs.
1 No. 0-100 Amps ammeter with selector switch and CT's 100/5A.
All Outgoing MCCBs shall have multi function meter - parameters - digital multifunction meter
shall indicating A / V with RS-485 port with suitable CTs, CT shorting links.
1 Set 571,188.33 571,188.33
5.0 Supply of Aircooled Digital Scroll VRF SYSTEM Unit with R 410a Refrigerant, Aircooled
Condenser along with inbuilt microprocessor panel.
OUTDOOR UNIT (Mitsubishi,Carrier midea,Blue Ster)
5.1 63 HP - GROUND FLOOR 1 Each 1,405,420.05 1,405,420.05
5.2 12 HP - GROUND FLOOR 1 Each 359,455.97 359,455.97
5.3 63 HP - FIRST FLOOR 1 Each 1,405,420.05 1,405,420.05
5.4 57 HP - SECOND FLOOR 1 Each 1,332,695.00 1,332,695.00
5.5 54 HP - THIRD FLOOR 1 Each 130,949.53 130,949.53
5.6 50 HP - FOURTH FLOOR 1 Each 1,282,650.51 1,282,650.51
6.0 VRF INDOOR UNITS
6.1 COMPACT CASSETTE UNIT 0.6 TR 8 Each 33,979.43 271,835.44
6.2 COMPACT CASSETTE UNIT 0.6 TR 16 Each 34,277.38 548,438.08
6.3 LARGE CASSETTE UNIT 2.8 TR 4 Each 48,876.93 195,507.72
6.4 LARGE CASSETTE UNIT 2.3 TR 3 Each 42,089.73 126,269.19
6.5 LARGE CASSETTE UNIT 1.5 TR 1 Each 41,098.92 41,098.92
6.6 WALL MOUNTED UNIT 1.0 TR 6 Each 20,999.92 125,999.52
6.7 WALL MOUNTED UNIT 0.8 TR 4 Each 20,909.02 83,636.08
6.8 DUCTED UNIT 8.0 TR 10 Each 63,753.22 637,532.20
6.9 DUCTED UNIT 6.0 TR 6 Each 60,122.27 360,733.62
6.1 DUCTED UNIT 5.0 TR 6 Each 57,703.32 346,219.92
6.1 DUCTED UNIT 4.0 TR 11 Each 43,272.44 475,996.84
1 Set 266,640.00 266,640.00
4.0
6.1 DUCTED UNIT 3.0 TR 6 Each 34,540.99 207,245.94
6.1 5.5 TR TREATED FRESH AIR UNIT 2 Each 47,614.43 95,228.86
6.1 3.5 TR TREATED FRESH AIR UNIT 2 Each 41,843.29 83,686.58
6.2 SUPPLY OF IMPORTED REFNET JOINTS 79 Each 7,434.61 587,334.19
6.2 CORDLESS CONTROLLER 42 Each 915.06 38,432.52
6.2 CORDED CONTROLLER 39 Each 3,139.08 122,424.12
6.2 2.0 TR (3 STAR) NON VRF STAND ALONE SPLIT UNIT FOR SERVER ROOM 3 Each 45,450.00 136,350.00
7.0 Price for Supply Installation & Commissioning of Ancillary Items for VRF
7.1 Installation & Commissioning of Digital Scroll VRF Units , with outdoor mounting, pressure
testing, nitrogen flushing etc16 Each 23,583.50 377,336.00
7.2 REF ( R - 410 ) VRF 130 Kg 1,959.40 254,722.00
7.3 V I Pads- VRF 16 Set 686.80 10,988.80
7.4 Installation of VRF Indoor Units 85 Each 1,767.50 150,237.50
7.5 Installation of stand alone split unit including copper pipe, control cable between indoor &
outdoor units, refrigerant gas etc.3 Each 4,913.65 14,740.95
7.6 Installation of Axial Fan units 10 Each 3,928.90 39,289.00
7.7 Installation of jet fan units 12 Each 2,060.40 24,724.80
7.8 installation of co sensor 4 Each 1,572.57 6,290.28
7.9 Supply and Installation of imported REFNET JOINTS 1 LOT 38,814.30 38,814.30
7.1 Refrigerant Piping with insulation
Suction/ Liquid line with Nitrile rubber insulation(Nippon/Nissan/Rajco//Totaline)
7.1 1 3/8" OD 140 Rmt 1,920.01 268,801.40
7.1 15/8" OD 145 Rmt 2,232.10 323,654.50
7.1 11/8" OD 200 Rmt 1,395.82 279,164.00
7.1 7/8" OD 285 Rmt 1,094.84 312,029.40
7.2 5/8" OD 180 Rmt 805.98 145,076.40
7.2 3/4" OD 320 Rmt 968.59 309,948.80
7.2 3/8" OD 160 Rmt 507.02 81,123.20
7.2 1/2" OD 485 Rmt 604.99 293,420.15
7.2 1/4" OD 240 Rmt 369.66 88,718.40
8.0 HDPE Drain piping with insulation
8.1 40 mm. 100 Rmt 298.96 29,896.00
8.2 32 mm 200 Rmt 259.57 51,914.00
8.3 25 mm 400 Rmt 219.17 87,668.00
9.0 Electricals/Cables
Control Cable 2C x 1.5 sqmmfor VRF unit1400 Rmt 158.57 221,998.00
10.0 GSS Ducting 24G with hangers, supports etc.
10.1 24 G 1050 Sqmtr 785.78 825,069.00
10.2 22 G 300 Sqmtr 914.05 274,215.00
10.3 DUCT THERMAL INSULATION WITH13 MM AL. FOIL FACED GLASS WOOL (TAIL END) 750 Sqmtr 874.66 655,995.00
10.4 Duct Acoustic Insulation with 12 mm thick FGP (48Kg/cum) RP Tissue + 36g Aluminium
Perforated Sheet200 Sqmtr 661.55 132,310.00
10.5 Air distribution Discrete Grilles / Diffusers
10.6 GI Duct Dampers 10 Smt 4,484.40 44,844.00
10.7 Supply air grilles/diffusers air grille with VCD and air box 20 Smt 9,039.50 180,790.00
10.8 Return air grilles/diffusers air grille with VCD 28 Smt 8,682.97 243,123.16
10.9 Fresh air packaged with BIRD SCREEN/COWL/DAMPER 18 Each 4,129.89 74,338.02
10.10 Flexible fire retardent canvass connection 43 Each 2,161.40 92,940.20
11.0 BASEMENT VENTILLATION SYSTEM
Axial fan 800mm Dia Tube axial Type Fan is suitable for 3~, 400 V, 50 Hz power supply and for
300°C & 2 hrs operation.
11.1 30000 CMH 10 Each 126,250.00 1,262,500.00
11.2 315mm dia Jet Fan is suitable for 3~, 400 V, 50 Hz power supply and for 300°C & Hrs operation.
CFD analysis price is Included in our offer.12 Each 60,600.00 727,200.00
11.3 CO SENSOR 8 Each 25,250.00 202,000.00
12.0 Supply, Laying of cables on cable trays/Hume pipes/structural supports/underground and cable
supports provided, include unloading, shifting upto site. The scope includes clamping of cables
by ready made G.I. spacers, saddles or clamps fabricated out of GI strip 3 mm thick. (Havells
/POLYCAB /KEI)
12.1 3.5C X 16Sq.mm. - PVC/Cu ARM, stranded, from VRF Panel to unit. 120 Metre 1,300.88 156,105.60
12.2 3.5C X 25Sq.mm. - PVC/Cu ARM, stranded, from VRF Panel to unit. 250 Metre 1,761.44 440,360.00
12.3 3.5C X 120Sq.mm. - PVC, Al, stranded as incommer from Rising Main 320 Metre 1,037.27 331,926.40
12.4 3.5C X 150Sq.mm. - PVC, Al, stranded as incommer from Rising Main 80 Metre 1,203.92 96,313.60
13.0 Supplying & fixing of double compression type Brass glands & making joint with necessary AL. /
CU. crimping socket of long neck type connecting the same to various equipment like section
pillar, switch, starter, motor etc. for the following sizes:(COMET/ CONNECT WEL/ DOWELS)
13.1 4C X 16Sq.mm. - Cu 8 End 104.54 836.32
13.2 3.5C X 25Sq.mm. - Cu 24 End 160.59 3,854.16
13.3 3.5C X 120Sq.mm. - Al 8 End 324.21 2,593.68
13.4 3.5C X 150Sq.mm. - Al 2 End 324.21 648.42
14.0 Supplying & finishing cable ends with necessary AL. / CU. crimping socket of long neck type
connecting the same to various equipment like section pillar, switch, starter, motor etc. for the
following sizes:(COMET/ CONNECT WEL/ DOWELS)
14.1 4C X 16Sq.mm. - Cu 8 End 99.99 799.92
14.2 3.5C X 25Sq.mm. - Cu 24 End 125.75 3,018.00
14.3 3.5C X 120Sq.mm. - Al 8 End 452.99 3,623.92
14.4 3.5C X 150Sq.mm. - Al 2 End 477.23 954.46
15.0 VRF Panel (Type - 1)
Supply, installation, testing and commissioning of following outdoor type Distribution Board
with sloping canopy on the top, IP-65 protected, double door, M.V. cuble type totally enclosed,
14 SWG CRCA Sheet, free standing type, dust, damp and vermin proof, MV Panel complete with
busbars, M.V. danger notice plate, interconnections witrh suitable capacity aluminium
leads/solid aluminium strips/rods, connection of incomming and outgoing cables with thimbles,
stove enamelled painted and having following incomming and outgoing switchgears complete
as required for VRF Panel.
Incommer:
125 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock
facility. MCCB should have spreader links & phase barriers.
1 set of phase indicating lamps with HRC fuses.
Incoming MCCB shall have multi function meter - parameters - digital multifunction meter shall
indicating A / V with RS-485 port with suitable CTs, CT shorting links.
Busbar:
200 AMP,25KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current ratio shall
be 1 sq mm = 0.8 A
Outgoings:
4 Nos. 50 Amps 415V, FP MCB, 10KA with phase indicating lamps.
1 No. 0-100 Amps ammeter with selector switch and CT's 100/5A with each feeder.
All MCBs are C-series type.
VRF Panel (Type - 1) as above.
6 set 202,000.00 1,212,000.00
VRF Panel (Type - 2)
Supply, installation, testing and commissioning of following outdoor type Distribution Board
with sloping canopy on the top, IP-65 protected, double door, M.V. cuble type totally enclosed,
14 SWG CRCA Sheet, free standing type, dust, damp and vermin proof, MV Panel complete with
busbars, M.V. danger notice plate, interconnections witrh suitable capacity aluminium
leads/solid aluminium strips/rods, connection of incomming and outgoing cables with thimbles,
stove enamelled painted and having following incomming and outgoing switchgears complete
as required for VRF Panel.
Incommer:
160 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
Extended rotary operating mechanism with door interlock with defeat feature and padlock
facility. MCCB should have spreader links & phase barriers.
1 set of phase indicating lamps with HRC fuses
Incoming MCCB shall have multi function meter - parameters - digital multifunction meter shall
indicating A / V with RS-485 port with suitable CTs, CT shorting links.
Busbar:
250 AMP,25KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current ratio shall
be 1 sq mm = 0.8 A.
Outgoings:
5 Nos. 50 Amps 415V, FP MCB, 10KA with phase indicating lamps.
1 No. 0-100 Amps ammeter with selector switch and CT's 100/5A with each feeder.
All MCBs are C-series type.
VRF Panel (Type - 1) as above
17.0 OTHER FITTING
17.1 32A FP SFU ISOLATOR (for 12HP outdoor unit at Gnd Fl. ) Make : Laygrad 1 No. 2,020.00 2,020.00
17.2 Supply and fixing 250 Volt , 6-10A per way, (2+6) way SPN MCBDB with SS enclosure double
door with IP 42/43 protrction with 1 no 40 A DP isolator as a incomer and 5 nos SPMCBs (C
curve 10 KA) as outgoing concelled in wall after cutting the wall and mending good damages to
original finish including interconnection with suitable size of copper wire and neutral link &
protrction for earthing attachment . Make : Legrand.
1 No. 3,354.21 3,354.21
18.0 Electrical Rising main & Tap off boxes for VRF
1 set 227,250.00 227,250.00
16.0
18.1 Supply, erection, testing and commissioning of 1000 Amps, FP internally earthed Al. Rising
Main System, IP54, 50KA breaking capacity along with all necessary fabrication of supports and
other accessories works complete as per specification, through the shaft/ceiling/wall of
different floor as required including end feed units with MCCB & tap off boxes of rating as
follows at every floor . All joints / tees bends / phase change over boxes etc are deemed to be
included in the supply. Arrangement for future extention arrangement upto eight floor has to
included and complete as required of make MDS-Legrand/C&S or approved equivalent.
35 Mtr. 25,425.74 889,900.90
18.2 End Feed Unit, 1000A, ACB, 50KA 1 Each 145,736.94 145,736.94
18.3 Tap Off boxes, 160A, 25KA for Gnd Floor 1 Each 43,680.48 43,680.48
18.4 Tap Off boxes, 125A, 25KA for 1st Fl, 2nd Fl, 3rd Fl & 4th Fl. 4 Each 41,072.66 164,290.64
19.0 BASEMENT VENTILATION SYSTEM
LT CABLES
Supply, Laying of cables on cable trays/Hume pipes/structural supports/underground and cable
supports provided, include unloading, shifting upto site. The scope includes clamping of cables
by ready made G.I. spacers, saddles or clamps fabricated out of GI strip 3 mm thick. (Havells
/POLYCAB /KEI)
19.1 3C X 2.5 Sq.mm. - PVC/Cu ARM, stranded, for Jet Fan. 300 Metre 341.38 102,414.00
19.2 3C X 10 Sq.mm. - PVC, Al, stranded, for Axial Fan 250 Metre 310.07 77,517.50
19.3 3.5C X 150 Sq.mm. - PVC, Al, stranded, as incommer. 70 Metre 1,203.92 84,274.40
20.0 Cutting channel of 40mm X 40mm size on masonry wall incl. S&F heavy gauge 19 mm dia 3 mm
thick polythene pipe by means of iron hooks and supplying and drawing 18 SWG GI Wire fish
wire incl. mending good damages to building works
1400 RM 74.49 104,286.00
21.0 Supplying and Drawing 1.1 KV, 2 x 22/0.3 (1.5 sqmm), single core, stranded, 'FR' PVC insulated&
unsheathedsingle core stranded copper wire (approved make) of the following sizes in the
prelaid 19mm dia 3mm thick polythene pipe and by the prelaid 18 SWG GI Wire fish wire and
making necy. connection as required for VRF unit/ CO Sensor.
1400 RM 40.40 56,560.00
22.0 Supplying & fixing of double compression type Brass glands & making joint with necessary AL. /
CU. crimping socket of long neck type connecting the same to various equipment like section
pillar, switch, starter, motor etc. for the following sizes:(COMET/ CONNECT WEL/ DOWELS)
22.1 3C X 2.5Sq.mm. - PVC/Cu ARM, stranded, for Jet Fan. 24 End 59.09 1,418.16
22.2 3C X 10Sq.mm. - PVC, Al, stranded, for Axial Fan 20 End 104.54 2,090.80
22.3 3.5C X 150Sq.mm. - PVC, Al, stranded, as incommer. 2 End 324.21 648.42
23.0 Supplying & finishing cable ends with necessary AL. / CU. crimping socket of long neck type
connecting the same to various equipment like section pillar, switch, starter, motor etc. for the
following sizes:(COMET/ CONNECT WEL/ DOWELS)
23.1 3C X 2.5Sq.mm. - PVC/Cu ARM, stranded, for Jet Fan. 24 set 52.52 1,260.48
23.2 3C X 10Sq.mm. - PVC, Al, stranded, for Axial Fan 20 set 72.72 1,454.40
23.3 3.5C X 150Sq.mm. - PVC, Al, stranded, as incommer. 2 set 531.26 1,062.52
24,635,119.19
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
1 Electrical Section IV ( COMPOUND LIGHTING )
Supply, Laying of cables on cable trays/Hume pipes/structural supports/underground and cable
supports provided, include unloading, shifting upto site. The scope includes clamping of cables
by ready made G.I. spacers, saddles or clamps fabricated out of GI strip 3 mm thick. (Havells
/POLYCAB /KEI)
1.1 3C X 2.5Sq.mm. - PVC/Cu ARM, stranded, for Campus Lighting pnl outdoor lighting 500 Metre 127.26 63,630.00
1.2 4C X 10Sq.mm. - Al stranded for Campus Lighting pnl outgoing 500 Metre 105.04 52,520.00
1.3 4C X 16Sq.mm. - Al stranded for Substation & lighting pnl 350 Metre 139.38 48,783.00
2 Supplying & fixing of double compression type Brass glands & making joint with necessary AL. /
CU. crimping socket of long neck type connecting the same to various equipment like section
pillar, switch, starter, motor etc. for the following sizes:(COMET/ CONNECT WEL/ DOWELS)
2.1 4C X 10Sq.mm. - Al, 20 End 69.69 1,393.80
2.2 4C X 16Sq.mm. - Al 4 End 69.69 278.76
3 Supplying & finishing cable ends with necessary AL. / CU. crimping socket of long neck type
connecting the same to various equipment like section pillar, switch, starter, motor etc. for the
following sizes:(COMET/ CONNECT WEL/ DOWELS)
3.1 4C X 10Sq.mm. - Al, 20 End 48.48 969.60
3.2 4C X 16Sq.mm. - Al 4 End 66.66 266.64
4 Campus / Outdoor Lighting Panel
Supply, installation, testing and commissioning of following outdoor type Lighting Distribution
Board with Synchronous Timer / Timer Circuit for automatic controlling, sloping canopy on the
top, IP-65 protected, double door, M.V. cuble type totally enclosed, 14 SWG CRCA Sheet, free
standing type, dust, damp and vermin proof, MV Panel complete with busbars, M.V. danger
notice plate, interconnections witrh suitable capacity aluminium leads/solid aluminium
strips/rods, connection of incomming and outgoing cables with thimbles, stove enamelled
painted and having following incomming and outgoing switchgears complete as required for
campus / outdoor lighting.
Incommer:
40 Amps, 415V, 25KA(Isc), FP MCCB with thermal magnetic release having variable current
setting of 0.8 to 1.0 In.
1 set of phase indicating lamp with HRC fuses.
Timer
All incoming with 40A DIGITAL, 365 DAYS, 24 HRS. PROGRAMMABLE TIMER with suitable
contactor.
Busbar:
100 AMP,25KA, 650 Volts, 3 phase 50 Hz FP Al. bus bars of suitable length - Current ratio shall
be 1 sq mm = 0.8 A
Outgoings:
4 Nos. 20 Amps 415V, FP MCB phase indicating lamps.
9 Nos. 10 Amps 415V, DP MCB phase indicating lamps.
All MCBs are C-series type.
3 set 51,533.54 154,600.62
5 Campus / Outdoor Lighting Panel as above
Supply, Installation, testing & commissioning of standard light fittings and lighting accessories
including lamp and other accessories as required.The scope shall include, providing of all
hardware such as downrod, nuts,anchor fastners, bolts, screws, cleats, clamps, Lugs, PVC
insulated wires / cables (CROMPTON GREAVES / BAJAJ / PHILIPS)
5.1 Excavation in all sorts of soils including hard rock/ murrum for required depth and back filling.
Contractor's scope of work under this item shall include disposal of surplus earth and shoring,
shuttering and dewatering if required. Excavation shall be done as per directions of Engineer-in-
charge.
600 Rmt 190.89 114,534.00
5.2 Supplying and spreading fine sand for a thickness of 100 mm. and providing and laying bricks
for cable protection. on all the three sides.600 Rmt 124.23 74,538.00
5.3 Supply & fixing of 25mm. external dia rigid PVC conduit laid in floor/wall etc for laying of
cable/GI wire by cutting & making good for damages , inclusive of all tees, bends, elbows,
reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe
hooks etc. complete as per the direction of EIC.
600 M 46.46 27,876.00
ENGINEERING PROJECTS (INDIA) LIMITED
( A GOVT OF INDIA ENTERPRISE )
Name of the Work : Construction of 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises No. 04-
Tender No: DLI/CON/710/563
BILL OF QUANTITIES
6 Supply, installation, testing and commissioning of 5.6 mtr above ground, seamless conical
tapering GI poles with single seamless conical tapering suitable length of GI bracket of
approved shape & suitable for mounting with 28W LED fixture & Solar Panel of approved make.
The rates shall be inclusive of necessary foundation (min. 450 x 450 x 750 mm, M:15) with
anchor bolts coping with baseplate, etc. complete. The pole shall have concealed type (flush
door with proper strengthening to the cutout of the door opening) junction box with loop in
loop out connector (bakelite connector of 15A) and MCB for fixture.
a) 40 mm diameter GI pipe with long bend for each cable entry .
b) Wiring up to the light fixture from the junction box using 3nos x 2.5 sq.mm. flexible copper
wires of specified make.
c) Excavation & back filling for erection of poles. Debris to be removed from the site to suitable
location instruction of the engineer incharge.
d) Earthing with GI earth spike, size 1822 length X 20 mm. dia directly driven in soil below
ground level & interconnection of spike with poles / looping box with 6 SWG GI wire (2 runs). GI
protection for earthing lead of suitable length (Av. 3 mtr. approx.) for pole earthing & looping
box earthing.
40 set 106,050.00 4,242,000.00
7 Supply, installation, testing and commissioning of BOLLARD, GARDINA 2, 1x26W CFL(TU),
HAVELLS CAT NO. LHLC02126099 or approved equivalent, complete with base & log
bolts,terminal box etc. for garden & wiring through 3CX2.5 sqmm. copper armoured cable.
a) 25 mm diameter GI pipe with long bend for each cable entry .
b) Providing necessary foundation with 300mmX300mmX300mm. Deep 1:3:6 ratio cement
concrete complete as required.
c) Excavation & back filling for erection . Debris to be removed from the site to suitable location
instruction of the engineer incharge.
30 set 8,561.42 256,842.60
8 Supply, installation, testing and commissioning of JETA 6, 1X400W MH Set, HAVELLS CAT NO.
LHFY40140C99 with lamp or approved make, outdoor fittings as integral architectural flood
lightings, terminal box, etc. of building complete with all accessoies and necessary electrical
wiring through 3CX2.5 sqmm. copper armoured cable.
a) 25 mm diameter GI pipe for each cable entry .
b) Providing necessary foundation with 300mmX300mmX300mm. Deep 1:3:6 ratio cement
concrete complete as required.
c) Excavation & back filling for erection. Debris to be removed from the site to suitable location
instruction of the engineer incharge.
15 set 13,171.41 197,571.15
9 Supply, installation, testing and commissioning of Impact popular arrylic IP 65, 1X 70W SON,
Havells Cat No. LHRY28170D99, street light fixture, outdoor fitting, with 70 Watts Sodium
Vapour lamp complete with control gear, acrylic cover, terminal box, etc. and its wiring with
2CX2.5 sq.mm. PVC insulated copper wire and 1.5 sq.mm. PVC insulated copper earth wire
from control box complete as required to be connected with Substation DB.(wiring for the same
shall be paid in rmt)
4 Each 5,400.28 21,601.12
10 Garden spike and mini flood luminaires, 1 X 50W E-27 for garden use (Make : Bajaj) 20 Each 2,594.77 51,895.40
11 Supply, installation, testing and commissioning of Water body light philips cat no. EW Graze
power Wee narrow 2700K or equivalent model from approved makes as required.
The above installations shall be completed as per specifications and as required.20 Each 7,836.99 156,739.80
12 SITC of IP66 Water Tight Junction Box 139mm x 115mm x 70mm With necessary clamp for
mounting of the J.B. (All the cable / wire connections to the DB shall be with the Water tight IP
66 Polyamide Glands, open Holes should be sealed with the IP65 Grommets only ) J. B. Should
be provided with cable connectors to connect 1 nos. of 4.0 sq. mm. x 2 core cables + Earth wire
& 6 nos. of 2.5 sq. mm x 2 core wires + Earthing wires.(Make of Hensel make cat.no. KD5065 +
Connectors + IP65 Glands + IP65 Grommets or equivalent) (wiring for the same shall be paid in
rmt) - fountain, ramp light, etc. from Campus lighting Panel (wiring for the same shall be paid in
rmt).
4 Each 1,055.45 4,221.80
5,470,262.29
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
1 Electrical Section -V ( Fire)
INSIDE PUMP HOUSE
Providing & fixing, testing and
commissioning of electrically driven high
pressure centrifugal fire hydrant and sprinkler
pump, suitable for automatic operation
consisting of the following:
Horizontal, end suction centrifugal pump,
suitable for operation on 415 volts ± 6%, 3
phase, 50 HZ A.C supply. The installation
shall be complete with flexible coupling and
coupling guard as required. Fire pump shall
have C.I. casing, CS diffusers, bronze impeller
(hard finished and dynamically balanced) and
S.S. (304) Shaft with mechanical seal, capable
for delivering head to ensure a minimum
pressure of 3.5 Kg/Sqcm at the farthest or
topmost hydrant / sprinkler. The installation
shall be complete with necessary pressure
gauge with gun metal shut off cock on delivery
side.
Squirrel cage induction motor, TEFC type
suitable for operation on 415 volts, 3 phase 50
HZ A.C supply, for the above pump with
synchronous speed of 2900 RPM, conforming
to IP 55 protection & class F insulation. The
motor shall conform to IS 325-1978 (up to
2 Sets 235,000.00 470,000.00
2 Providing & fixing, testing and
commissioning of Diesel Engine driven fire
pump suitable for automatic operation
comprising of the following and conforming
to BS 649/IS 10002 all amended upto date.
Horizontal, split casing centrifugal pump,
suitable for operation on 415 volts ± 6%, 3
phase, 50 HZ A.C supply. The installation
shall be complete with flexible coupling and
coupling guard as required. Fire pump shall
have C.I. casing, CS diffusers, bronze impeller
(hard finished and dynamically
balanced) and SS (304) shaft with
mechanical seal, capable for delivering head to
ensure a minimum pressure of 3.5 Kg/Sqcm at
the farthest or topmost hydrant / sprinkler.
The installation shall be complete with
necessary pressure gauge with gun metal shut
off cock on delivery side.
Heat exchanger cooled (secondary cooling)
diesel engine of speed 1500 RPM suitable for
the above pump with automatic starting
mechanism and other accessories including
fuel tank (fabricated from 3mm MS sheet,
painted with two coats of synthetic enamel
paint over a coat of primer) of capacity
adequate to sustain pump operation for 8
hours continuous working. The tank shall be
1 Set 727,200.00 727,200.00
ENGINEERING PROJECTS (INDIA) LIMITED
( A GOVT OF INDIA ENTERPRISE )
Name of the Work : Construction of 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development
Tender No: DLI/CON/710/563
BILL OF QUANTITIES
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
3 bolts.
Capacity : 2850LPM.
Head : 80 M
Supply, installation, testing and commissioning
of Jockey pump (pressurisation pump) of the
following duty:
Horizontal end suction Centrifugal pump,
suitable for operation on 415 volts ± 6%, 3
phase, 50 HZ A.C supply. The installation
shall be complete with Flexible coupling and
coupling guard, complete as required.
Jockey pump shall be of stainless steel
construction.
Horizontal, end suction centrifugal pump,
suitable for operation on 415 volts ± 6%, 3
phase, 50 HZ A.C supply. The installation
shall be complete with flexible coupling and
coupling guard as required. Fire pump shall
have C.I. casing, CS diffusers, bronze impeller
(hard finished and dynamically balanced) and
S.S. (304) Shaft with mechanical seal, capable
for delivering head to ensure a minimum
pressure of 3.5 Kg/Sqcm at the farthest or
topmost hydrant / sprinkler. The installation
shall be complete with necessary pressure
gauge with gun metal shut off cock on delivery
side. (The pump should be tested for bench
mark at factory and shall be gotten approved
1 Set 95,950.00 95,950.00
4 Providing & fixing MS Class ‘C’ diesel engine
exhaust pipe (including all fittings, clamps,
steel support) of suitable dia for the engine.
The pipe shall be provided with 12 mm thick
supercera ceramic fibre rope.
150 mm dia
36 RM 1,818.00 65,448.00
5 Providing & fixing dial type (150 mm) pressure
gauge suitable for working pressure of 250 PSI. 5 Each 1,111.00 5,555.00
6 Providing & fixing testing and commissioning
of adjustable pressure switches for
jockey pump/ electric pump along with control
wiring up to main panel as required 8 Each 2,222.00 17,776.00
Control Panel for Fire Pumps.
Fabricating & supply, installing, testing and
commissioning of compartmentalised
common control Panel for Electrical Motor
driven pumps.
and diesel engine driven pump.
INCOMING.
1 nos.630 A TPN MCCB (25KA)
PVC Sleeves.
1 set RYB indicating lamps with individual HRC
Control fuses.
1 No. 96 sq.mm 0-600 Amps. Ammeter with
selector switch and suitable rated.
current transformers.
1 No. 0-500V 96 sqmm Voltmeter with
selector Switch.
1 Nos 600 A, 4 POLE ATS (ASCO 300 Series)
OVER LAPPING NEUTRAL.
OUTGOING
Feeder for Main Fire Pump - 2 Nos.
1 Nos 250 A TP MCCB.
DOL starter with TP Contractors and indicating
lamps ON/OFF/TRIP push.
Buttons
2 Nos. Automanual Switch.
1 set 186,850.00 186,850.00
7
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
DIESEL ENGINE PUMP (STAND BY OPERATION) -
1 No.
20 Amps DPMCB - 2 Nos
Battery charger with transformers with
rectifier resistence DC ammeter, DC
voltmeter, Trickle/Booster/Off selector switch -
2 nos
1 set of indicating lamps for the following :
Phase indication
Battery charger on
DC supply on
Control switch on
Engine fails to start
Pump on
Low oil pressure.
High water temperature.
Auto manual selector switch.
1 sets of push button stations for the following
:
Engine start.
Engine stop
Engine hooter ACK.
Engine Fault reset.
Selector switches (Engine control, mode All the components shall be housed in a
common cubical made of 16 SWG MS Sheet
with required stiffners (if required) The Panel
shall be powder coated of approved color
both inside & outside. The Panel shall be
powder coated of approved colour both inside
& outside. The Panel shall have both bottom &
top cable entry provisions and panel shall be 8 1100 V GRADE POWER / CONTROL CABLES
Supply, laying, testing & commissioning of
FRLS, PVC outer sheathed, steel armoured,
aluminium/copper condoctor,1100 V grade
power cables with glands etc. The cables shall
be laid in tray/hume pipe/in trenches/on
walls/floor etc.as required. For cables laid
outdoor the rate shall include Earth excavation 8.1 3.5 C x 70 sq mm YFY for Main Pumps 35 Meter 757.50 26,512.50
8.2 4 C x 10 sq mm YFY for Jockey Pumps 20 Meter 242.40 4,848.00
8.3 12 C x 2.5 sq mm for Diesel Engines 20 Meter 459.55 9,191.00
8.4 2 C x 2.5 sqmm for instrumentation 55 Meter 191.90 10,554.50
9 G.I Earthing strips of 50 mm x 6 mm thick strip
shall be run on floor/ceiling/walls etc from Fire
Pumps to MCC Panel
30 Meter 85.85 2,575.50
10 Supply,installation,testing & commissioning of
MS Pipes IS : 1239/3589 with painting, one
coat of primer with two coats of synthetic
enamel paint of approved color/shade.(Above
Ground Piping)
10.1 200 mm Nb (6.35 mm thick. IS-3589) 36 RM 2,020.00 72,720.00
10.2 150 mm Nb 24 RM 1,717.00 41,208.00
10.3 100 mm Nb 6 RM 1,111.00 6,666.00
10.4 50 mm Nb 18 RM 454.50 8,181.00
10.5 25 mm Nb 6 RM 277.75 1,666.50
11Supply,installation,testing & commissioning of
CI Gate Valve as per IS : 14846 (PN 10) and non
rising spindle type with flanges,
bolts, nuts, washers, gaskets, etc.
11.1 150 mm Nb 3 Each 11,110.00 33,330.00
11.2 100 mm Nb 1 Each 6,060.00 6,060.00
11.3 c) 50 mm Nb 2 Each 3,535.00 7,070.00
12Supply, installation, testing & commissioning
of CI Non Return Valve as per IS : 5312 (PN 16)
swing check type with required
flanges, nuts, bolts, gaskets etc.
12.1 150 mm Nb 4 Each 10,100.00 40,400.00
12.2 50 mm Nb 1 Each 3,535.00 3,535.00
12.3 40 mm Nb 4 Each 3,030.00 12,120.00
1 set 186,850.00 186,850.00
7
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
13Supplying, Installation, testing &
commissioning of Aluminium Di- Cast Butterfly
valves (PN 16) standard lever operated type
with flanges,nuts & bolts, gaskets etc.
40 mm Nb
4 Each 2,828.00 11,312.00
14 Supplying, Installation, testing &
commissioning Gun Metal screw type Ball
Valve.
25 mm Nb
14 Each 1,010.00 14,140.00
15Supply,installation,testing & commissioning of
CI Foot valve wuth suction strainer with
companion flanges,gaskts,nuts,bolts etc
15.1 200 mm Nb 3 Each 12,120.00 36,360.00
15.2 80 mm Nb 1 Each 5,050.00 5,050.00
16Hydrant System
Supply,installation,testing & commissioning of
MS Pipes IS : 1239 (medium grade) with
painting, one coat of primer with two coats of
synthetic enamel paint of approved
color/shade.( Above Ground Piping )
16.1 150 mm Nb 448 RM 1,717.00 769,216.00
16.2 100 mm Nb 55 RM 1,111.00 61,105.00
16.3 80 mm Nb 100 RM 858.50 85,850.00
17Supply,installation,testing & commissioning of
MS Pipes IS : 1239 (medium grade) being laid
in trenches/hume pipe support complete with
necessary fitiings e.g bends,flanges etc and
insulated with Anticorrosive bitumen primer
and wrapped with 3 mm thick Polymer
corrosion resistant tape.
150 mm Nb
20 RM 2,020.00 40,400.00
18Supply,installation,testing & commissioning of
Hume pipe with jointing collars NP2 for laying
of under ground pipe.
300 mm dia
24 RM 2,424.00 58,176.00
19Supplying, Installation, testing &
commissioning of Aluminium Di- Cast Butterfly
valves (PN 16) standard lever operated type
with flanges,nuts & bolts, gaskets etc.
150 mm Nb
4 Each 2,828.00 11,312.00
20 Supply,installation,testing & commissioning of
CI Non Return Valve as per IS dual plate wafer
type with required flanges, nuts, bolts,
gaskets etc.
150 mm Nb.
4 Each 1,313.00 5,252.00
21Supply,installation,testing & commissioning of
25 mm Nb GM Air Release Valve on Hydrant
and Sprinkler riser
21.1Providing & fixing dial type (150 mm) pressure
gauge suitable for working pressure of 250 PSI
on top of Hydrant Riser
2 Each 1,111.00 2,222.00
22 Supply,installation,testing & commissioning of
Fire Hydrant eqiupments as follows:
22.1 SS Single head Hydrant Valve as per Is 5290
with 63 mm dia instantaneous couplings &
80mm dia flanged inlet,Blank caps,chain.
For External/Yard Hydrant System
6 Each 5,454.00 32,724.00
22.2 SS Single head Landing Valve as per Is 5290
with 63 mm dia instantaneous couplings &
80mm dia flanged inlet,Blank caps,chain.
For Internal Hydrant System
15 Each 5,454.00 81,810.00
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
22.3 One length of 15 m long,63 mm dia RRL Hose
with SS instantaneous couplings and copper
binding for internal Hydrant.
15 Each 4,545.00 68,175.00
22.4 Two length of 15 m long,63 mm dia CP Hose
with SS instantaneous couplings and copper
binding for external Hydrant.
12 Each 4,040.00 48,480.00
22.5 SS short Branch Pipe with 16 mm nozzle. 21 Each 1,818.00 38,178.00
22.6 CRCA Hose cabinet accompanied 1 no RRL
Hose,Branch Pipe for Internal Hydrant.15 Each 2,020.00 30,300.00
22.7 CRCA Hose cabinet accompanied 2 nos. CP
Hose,Branch Pipe for External Hydrant.6 Each 1,616.00 9,696.00
22.8 Fire First Aid Hose Reel drum with 20mm Nb
Thermo Plast Hose of 30 mtr in lenghth and
dual type (jet+spray) nozzle complete.15 Each 5,858.00 87,870.00
22.9 4 way Fire Brigade Inlet connection, 63 mm dia
in built dia SS non return valve1 Each 5,050.00 5,050.00
22.10 4 way Fire Water Reservoir Inlet connection, 1 Each 5,050.00 5,050.00
23 Fire Water Sprinkler System
Supply, installation, testing &
commissioning of MS Pipes IS : 1239/3589 with
painting, one coat of primer with two coats of
synthetic enamel paint of approved 23.1 150 mm Nb 160 RM 1,717.00 274,720.00
23.2 100 mm Nb 119 RM 1,111.00 132,209.00
23.3 80 mm Nb 398 RM 858.50 341,683.00
23.4 65 mm Nb 195 RM 505.00 98,475.00
23.5 50 mm Nb 91 RM 454.50 41,359.50
23.6 40 mm Nb 391 RM 479.75 187,582.25
23.7 32 mm Nb 484 RM 404.00 195,536.00
23.8 25 mm Nb 2100 RM 277.75 583,275.00
24 Supplying, Installation, testing &
commissioning of Aluminium Di- Cast Butterfly
valves (PN 16) standard lever operated type
with flanges,nuts & bolts, gaskets etc.
100 mm Nb
10 Each 3,636.00 36,360.00
25 Supply, installation, testing & commissioning
of CI Non Return Valve as per IS dual plate
wafer type with required flanges, nuts, bolts,
gaskets etc.
100 mm Nb
10 Each 5,353.00 53,530.00
26 Supplying, Installation, testing &
commissioning Gun Metal screw type Ball
Valve.
25 mm Nb
40 Each 1,010.00 40,400.00
27Supplying, Installation, testing &
commissioning Standard response quartzoid
bulb type sprinkler with 15 mm screwed end
connection of 68 deg. C temparature rating
and Sprinkler shall must be UL listed.
27.1 Upright Sprinkler 442 Each 202.00 89,284.00
27.2 Pendent Sprinkler 631 Each 202.00 127,462.00
27.3 Sidewall sprinker for Ramp area 225 Each 222.20 49,995.00
28 Supplying, Installation, testing &
commissioning Stainless steel corrogated
flexible pipe (hose) for dropping sprinklers
below
false ceiling,pipe shall be UL listed
214 Each 1,313.00 280,982.00
29Supplying, Installation, testing &
commissioning of Sprinkler control valve ( ICV
) with motor gong bell and trims as required.
150 mm Nb
3 Each 45,450.00 136,350.00
30 Supplying, Installation, testing &
commissioning of Water Flow switch.11 Each 2,474.50 27,219.50
31Providing & fixing dial type (150 mm) pressure
gauge suitable for working pressure of 250 PSI
on top of Sprinkler Riser
2 Each 1,111.00 2,222.00
32 Steel structure & supports 1 Lot 35,350.00 35,350.00
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
Fire Extinguishers and Fire Check Door
Supply, installaing and commissioning of
Portable Fire Extinguishers of following type &
capacity
33 Carbon Di-oxide type Fire Extinguishers
33.1 2.0kg capacity 15 Each 3,333.00 49,995.00
33.2 4.5 kg capacity 20 Each 5,050.00 101,000.00
34 Dry chemical type Fire Extinguishers
34.1 5.0 Kg capacity 70 Each 1,313.00 91,910.00
34.2 10.0 kg capacity 10 Each 1,616.00 16,160.00
35 WCO2 type Fire Extinguishers
35.1 9.0 ltrs capacity 40 Each 1,414.00 56,560.00
35.2 Mechanical Foam
35.3 9.0 ltrs capacity 8 Each 1,616.00 12,928.00
35.4 Fire Buckets round bottom type enamel
painted white inside, red outside with lid and
mounting Bracket.
8 Each 454.50 3,636.00
35.5 2 hours Rated Wooden Fire Check Door
(Frame & Shutter) with paint finish.( Frame &
Shutter ) with paint finish. ( Two nos )
200.00 sqm 6,767.00 1,353,400.00
35.6 Moduler type Clean Agent Fire Extinguishers,
Capacity 4.0 Kg capacity 39.00 Each 17,170.00 669,630.00
35.7 Moduler type ABC Fire Extinguishers, Capacity
5.0 Kg capacity5.00 Each 7,070.00 35,350.00
36 SIGNAGES
36.1 Photoluminescence signages " FIRE EXIT " 40 Each 378.75 15,150.00
36.2 Floor identification signages 20 Each 151.50 3,030.00
36.3 Electronic signages with emergency battery
back up for 12 hours16 Each 2,020.00 32,320.00
36.4 Fire Notice 8 Each 505.00 4,040.00
37 Fire Alarm and Detection System
Providing & Fixing, testing & commissioning of
Addressable Pull type Manual Call point with
all necessary fittings and consumables
56 Each 3,181.50 178,164.00
38 Providing & Fixing, testing & commissioning of
Addressable Hooter cum Strobe/ Flasher with
all necessary fittings and consumables40 Each 3,333.00 133,320.00
39 Providing & Fixing, testing & commissioning of
Addressable Photo Electric Smoke Detector
with all necessary fittings and consumables449 Each 2,979.50 1,337,795.50
40 Providing & Fixing, testing & commissioning of
Addressable Heat Detector with all necessary
fittings and consumables12 Each 2,929.00 35,148.00
41 Providing & Fixing, testing & commissioning of
Addressable Fault Isolator Modules with all
necessary fittings and consumables19 Each 2,525.00 47,975.00
42 Providing & Fixing, testing & commissioning of
Addressable Monitor Modules with all
necessary fittings and consumables10 Each 2,828.00 28,280.00
43 Providing & Fixing, testing & commissioning of
Addressable Duct Sensor Detector with all
necessary fittings and consumables425 Each 6,565.00 2,790,125.00
44 Providing & Fixing, testing & commissioning of
Addressable Control Modules with all
necessary fittings and consumables225 Each 3,333.00 749,925.00
45 Providing & Fixing, testing & commissioning of
Response Indicator170 Each 85.85 14,594.50
46 Providing & Fixing, testing & commissioning of 300 Each 707.00 212,100.00
47 Providing & Fixing, testing & commissioning of
250 watt RMS output solid state Amplifier with
Microphone
1 Set 25,250.00 25,250.00
Sl. Item Description Qnty Unit Rate (Rs.) Amount (Rs.)
48 Providing & Fixing, testing & commissioning of
Microprocessor based Intelligent Fire Alarm
Panel With battery and battery chargers,The
FACP shall have provision of Loop expansion
and shall be networkable type. Provision for
interfacing with other systems such as SCADA
/ IBMS with all required hardware and
software.
1 Set 277,750.00 277,750.00
49 Providing & Fixing, laying and termination of
Power and Control cable .
PVC sheathed and insulated copper Armour
3000 RM 146.45 439,350.00
14,812,025.25