Almaty 2018

ENGINEERING DESIGN

CONSTRUCTION

OPERATION

Comprehensive Solutions for the Mining Industry

OUR COMPANY

OWING TO 25 YEARS OFEXPERIENCE OBTAINED INVARIOUS REGIONS OF THEWORLD, OUR TEAM HAS ALL THEREQUIRED SKILLS TO DESIGN,BUILD AND COMMISSION ANYTYPE OF A PROCESSING PLANT,POWER GENERATION ANDINFRASTRUCTURE FACILITIES.

▪ We offer transparent and clear contractconditions for engineering design, supplyand construction (FIDIC Silver Book) to ourClients.

▪ We perform a full scope of design andconstruction works in full compliance withClient’s requirements, applying latesttechnology and hi-end software.

▪ We are keen to achieve the best energyefficiency of the future plant and willconsider alternative power sources.

▪ We believe that among our competitiveadvantages are flexibility, persistent focuson quality and the speed of response, whencomplex technical and organisationaldecision are to be made.

▪ We continuously optimise the cost of ourservices putting to operation a solid fleet ofowned machinery and equipment, andinvolve only subcontractors, proven by yearspartnership.

Engineering Design

AAENGINEERING GROUP

Construction and Process Equipment installation

Assistance withthe Client’s

Project Funding

Project Management

Services

Sale and Serviceof Process Equipment

for any ore processing plant

Design of Open Pits

Operation of Open Pits,

CIL / CIP / Concentration Plants

Heavy Lift

Equipment Services

Partners

▪ Supply of consumables and auxiliary equipment, components and spare parts for Gold Processing \ Concentration Plants.

▪ Contract repair and maintenance of any type of mining and processing equipment.

▪ Contract logistics.

▪ Engineering of utility systems and infrastructure.

▪ Feasibility Studies.▪ Strategic development of municipal

heating, water supply and sewage networks.

▪ Engineering design of Tailings Management Facilities.

▪ Heat and power supply plant and boiler house design.

▪ Designing of sewage treatment and purification facilities.

▪ Development of water balances for facilities, towns and regions.

▪ Design for the food processing industry.

▪ Middle and low pressure gas supply system design.

▪ Analysis and interpretation of ore research and test work.

▪ Developing process designcriteria and process models,performance of a completeprocess design cycle.

▪ Purchase of complex process equipment on foreign markets and 3rd party inspection of its manufacturing progress.

▪ Consolidation and arrangement of cargo delivery to construction sites.

▪ Supply of polymer and geosynthetic materials for industrial and civil construction.

▪ Supply of impervious materials and screens for tailings management facilities.

▪ Engineering advice on selection of polymer materials and their application.

▪ Modelling and supply of roofing and wall materials.

▪ Modelling of HVAC and water supply and drainage systems, supply of equipment and materials.

▪ Design of optimal geomembrane cutting and installation.

▪ Installation and supervision services.

AAENGINEERING GROUP PARTICIPANTS AND PARTNERS

IGOR VETIULGeneral Director

LAWRENCE ROSSOUWTechnical Director

VICTOR GLUSHKOManaging Director

Master of EngineeringDiploma in ConstructionManagement, supportedby more than 20 years ofexperience in projectmanagement in the MiningIndustry. His workexperience covers thefollowing countries:

Professional metallurgist withwork experience over 20 yearsas a Project Manager in theMining Industry in suchcompanies, as Tati Nickel Mine,Time Mining, Buhemba GoldMine, Altyn Almas JSC,Kazakhmys Projects.

20 years of managementexperience in the Oil andMining Industries withFluor, Total, HighlandGold, Schlumberger, BoartLongyear and Outotec.Master of Science inSupply ChainManagement.

The South African Republic, Botswana, Uzbekistan,Namibia, Angola, Congo, Mozambique, Italy, Russia,Kyrgyz Republic and Kazakhstan.

COMPANY MANAGEMENT

Pustinnoye I (2013-2014г):Feasibility Study, ЕРС Contract for construction of a Gold Processing Plant for 2 mtpa and infrastructure

Komarovskoye (2014-2015г): Engineering design of a Gold Processing Plant for 2 mtpa and infrastructure

Akbakai (2010-2012) :Bankable Feasibility Study, EPC Contract for construction of a Gold Processing Plant for 1.5 mtpa and infrastructure

Aksu, Bestobe and Zholymbet (2016-2018):Sampling, process devlopment and Feasibility Study. EPС Contract for construction of three Gold Processing Plants, with a total throughput of 7 mtpa.

OUR PROJECTS, 2006 – 2019

Jubileinoye (2017): Feasibility Study, process and FEED of a Gold Processing Plant for 5 mtpa and infrastructure.

Varvarinskoye (2006-2008): Management of the construction project of 4.2 mtpa Concentration Plant on behalf of the Owner.

Bakirchik, 2013-2014 : Development of Feasibility Study, engineering design of a Gold Processing Plant for 1.5 mtpa and infrastructure

Zhairem (2015-2017): Feasibility Study, design of a Concentration Plant for 5 mtpa and infrastructure

2016-2017

OUR PROJECTS, 2006 – 2019

Pustinnoye II (2017-2018) full scope of work on Gold Processing Plant capacity increase to 2.5 mtpa under an EPC Contract

2017-2018

Djamgyr (2018-2019)full scope of work in relation to the Gold Processing Plant for 0.3 mtpa under an EPC Contract

Shiraldjin (2018-2019) full scope of work in relation to the Gold Processing Plant for 0.5 mtpa under an EPC Contract

Syrymbet (2017-2018)Engineering design of infrastructure for a Processing Plant 2.5 mtpa.

OUR FLAGSHIP PROJECT

• We commissioned and handed over to the Client:

- Zholymbet Gold Processing Plant (2.25 mtpa) – October 2017

- Aksu Gold Processing Plant (2.25 mtpa) – November 2017

- Bestobe Gold Processing Plant (2.25 mtpa) – February 2018

• We have fully prepared new facilities for operation:

- Hired and trained operating personnel in all trades;

- Procured all required spare parts and consumables (includingsodium cyanide);

- Developed a set of required procedures and guidelines;

- Ensured compliance with all licensing requirements;

• In 2015 – 2016 we initiated and arranged sampling of the old tailingsof Kazakhaltyn gold plants, worked out a process based on CILtechnology with high recovery indices and developed Feasibility Study.

• We successfully presented our business case to Client’s experts,proved the project economics and executed an ЕРС Contract in June2016.

• Mobilisation to site commenced in July 2016 • Majority of construction, equipment installation, start-up and

commissioning work was carried out from July 2016 to September2017

OUR WAY TO WORK ON A PROJECT

• We develop deep understanding of Customer’s technicalexpectations at earliest stages of the project.

• Where possible strive for unification of the new processequipment with the one already used by our Client.

• Involve Client into development of the content of theOperational Information Model of the future plant andagree on its commissioning / handover process (COBie).

• Establish Project Risk Management Program as early as atthe Conceptual Design stage.

• Develop Project Schedule at a level of detail comfortablefor both the Client and Bank appointed Engineer.

• Create a 5D project model with the advanced technologyand tools, including comprehensive TEKLA STRUCTURESand BENTLEY SYSTEMS software package.

• Establish an integrated information environment to effectively manageengineering and other project data through the entire chain ProjectOwner / EPC Contractor / Suppliers and Sub-Contractors (ProjectWise).

• Within the concept of Construction Driven Engineering, apply latestconstruction site management methodology (Advanced WorkPackaging).

• Engage early and closely cooperate with hi-end process equipmentsuppliers and sub-contractors, whose reliability has been proven byyears of partnership.

• Bridge our EHS practices with Customer’s standards going for thetoughest requirements.

• Own a fleet of carefully selected and well maintained constructionequipment, which allows us meet a project challenge of any complexity.

• AECOsim Building Designer • Bentley ProStructures• ContextCapture • LumenRT• Tekla Structures• Dassault systems Surpac Vision

• MicroStation ConnectEdition• Promis.e• Bentley Raceway and Cable Management• Bentley PowerCivil for Russia• Bentley OpenPlant P&ID, Modeler, Isometrics

HI-END ENGINEERING SOFTWARE

APPLICATION OF TECHNOLOGY ADVANCES - DRONES

Our fleet of industrial standard drones is engaged to:• Create digital landscape model for design of general layout with all

necessary utilities;• Plan and control volumes for the civils, roads, dams and associated

earthworks;• Verify compliance of actual construction to initial design • Improve quality of project reporting;• Speed up generation of as-built drawings;

APPLICATION OF TECHNOLOGY ADVANCES – VIRTUAL REALITY

VR for us isn’t only a great visualization tool, but it also:• Helps us to identify collisions early and improve our solutions;• Works perfectly to put to life our design-for-maintenance commitment

(locations and dimensions of service platforms, passages and walkways, etc.);

• Verifies proper ergonomics for operators and assists in their early stage training;

• Ensures efficiency of our security and emergency management design (escape roots, access control and video surveillance measures);

• Assists our Construction and Safety Teams to plan for complex and heavy lifts, manage risks for Simultaneous Operations;

• Efficiently plan and reduce construction footprint, especially in Brownfield operations.

OUR EQUIPMENT

Volvo FH350, CAT 988, 980 Loaders

Moving enormous volumes of rock, performing

loading/unloading operations as well as a great

variety of other duties within a tight schedule,

would be impossible without our front-end loaders.

Equipment towing and cargo haulage for short

distances are other applications of this machinery.

CAT D10R, D8R Dozers

These heavy-weight champions are called for

when we work on huge Tailings Management

Facilities or tasked to build a road in the

highlands or any other assignment you can

think of in the most severe conditions.

Volvo EC700BLC,E460BLC Cat 365B, 336Dl

Hydraulic Excavators

With a working volume ranging from 1.3 to 4.6 m3

they are widely used to carry out work at unstable

ground and other complex soils. These machines

are the best companion to our dozers, front-end

loaders and dump trucks .

Low Bed Trucks of up to 100 tonnes load capacityare used to promptly deliver our heavy equipmentover any distance to a new project site.

BELL 50, Volvo A40D Articulated Dump Trucks

turn out actually irreplaceable when you need

to haul at a time 40 – 50 tons of aggregates,

rock or top soil, but for working conditions or

economic reasons would go for conventional

dump trucks.

TEREX RT190, GROOVE Cranes with the capacity up

to 90 tonnes and a considerable reach

These heavy-duty wheel-mounted cranes arebrought in to lift preassembled steel structures andoverweight process equipment to help us optimiseconstruction site activities.

AAENGINEERING GROUP IS LICENSED FOR:

▪ GSL No.16012656 Engineering Design, Category I, Class 1▪ GSL No.16012655 Construction and Installation Operations, Category I, Class 1▪ GSL No.16012657 Engineering Survey, Class 1▪ GSL No.16010894 Operation of Mining and Processing Facilities, Class 1▪ GSL No.0186Р Engineering Services in the area of Environment Protection, Class 1▪ Accreditation Certificate No. 0471 Construction Quality / Quantity Survey, Level 1

ISO COMPLIANCE:

▪ Quality Management Systems 9001:2008▪ Environmental Management 14001:2004▪ Health and Safety Management 18001:2007

LICENSES AND CERTIFICATES IN KAZAKHSTAN AND KYRGYZ REPUBLIC

AAEngineering Group LLP13A Almaly str., Alatau microdistrict, Bostandyk district, Almaty 050000 Republic of KazakhstanTel.: +7 727 228 25 65Fax: +7 727 228 25 66Rakia.Rustemova@aaengineering.kzwww.aaengineering.kz

OUR CONTACTS

AAEngineering Group LLP Branch in Kyrgyz Republic. 38 Tynystanova str., Bishkek Tel.+996 312 975 078, +996 312 975 079Mob. +996 770 000 141Elena.Melnichuk@aaegineering.kzwww.aaengineering.kz

ProMS LLP13A Almaly str., Alatau microdistrict, Bostandyk district, Almaty 050000 Republic of KazakhstanTel.: +7 727 228 25 65Fax: +7 727 228 25 66Anastassiya.Froimchuk@proms.kzwww.proms.kz

RIKAZ LLP25/1 Koshek Batyr str., Almaty 050000 Republic of KazakhstanTel:+7 (727) 391 2697Mob. тел: +7 (701) 524 3706dp@rikaz.kzwww.rikaz.kz

Kazakhskiy Santekhproekt LLP 293/2 Baizakov str., corner of Zhandosov str., Almaty 050000 Republic of Kazakhstan Tel: +7 727 323 23 12Tel: +7 771 266 21 32Fax: +7 727 392 23 05kazstp@kazstp.kzwww.kazstp.kz