ENERGETICS

ENERGETIC AND PYROMECHANICAL SYSTEMS OF THE HIGHEST QUALITY AND RELIABILITY, FOR A RANGE OF MISSION CRITICAL SYSTEMS

www.chemring.co.uk

Delivering global protection

3

4

5

6

8

11

CONTENTS

Aerospace Safety Systems

CADs and PADs

Commercial Aerospace

Space

Missiles

Demolition Stores

ENERGETICS

AEROSPACE SAFETY SYSTEMS

Most of our energetic systems are specifically designed for individual aircraft, missile and space platforms, all requiring exacting standards of safety and reliability. We have a full in-house capability to design, develop, test, manufacture and qualify a range of components including rocket motors, cartridges, initiators, thrusters, separation nuts & bolts, cutters and explosive devices.

Chemring is also a leading worldwide supplier of energetic raw material including:

• HMX and HMX formulations• RDX and RDX formulations• NTO and NTO formulations• HNS• Butyl-NENA and similar NENAs• IM propellants

Chemring designs and manufactures a range of highly effective safety systems used in emergency situations including crew egress. These products are supported by our safety testing equipment, including communications and oxygen supply testing.

AIRCREW EGRESS Chemring supplies complementary products for ejection seat deployment systems, including rocket propellant, canopy cords, time delay and actuation devices. High reliability and high performance within the egress sequence is essential. Chemring is the exclusive supplier to Martin Baker, the world’s leading manufacturer of ejection seats. Martin Baker ejection seats, using Chemring components, are fitted to a wide variety of aircraft including the F-35, Typhoon, Rafale, Hawk and Tornado. Additionally, Chemring Energetics is the leading manufacturer of CAD/PAD components used on the ACES II seat utilized in the F-16, F-15, A-10, B-1B, B-2, and F-22. A few examples of the type of components supplied for these platforms are:

• Time Delay Devices

• Ejection Seat Mortar Cartridges

• Drogue Gun Cartridge

• Harness Release Cartridge

• Harness Release Cutter

• Gyro Pin Up Cartridge

Canopy Removal

Canopy cutting cords are used in a variety of military aircraft to assist in canopy break-up and removal, allowing safe escape during the emergency ejection process. Chemring actuators and thrusters are also used in canopy removal. Analog Recovery Sequencer

Chemring manufactures the Analog Recovery Sequencer for the Advanced Concept Ejection Seat. Our system, fitted into the seat, utilises multiple pyromechanical devices including percussion primers, dual electrical bridgewires, linear explosive lines and hot gas systems to initiate the ACES II ejection seat system Aircrew Flight Equipment Tester

Chemring designs and manufactures custom test equipment to meet customers’ specifications. An example is the Joint Combined Aircrew Systems Tester (JCAST) to meet the requirements established by the US Life Support military personnel. The JCAST integrates several required items of test equipment into a single, portable, rugged, self-contained test unit. This test equipment eliminates the need for high pressure air/oxygen cylinders, hazardous materials and significantly reduces supporting man-hours, deployment costs, and mobility footprint. The computer driven JCAST has a LCD panel display for easy to follow step-by-step inspection procedures. The JCAST provides capability for testing Man Mounted Regulators, and with a data interface, it provides flexibility and expandability through accessory modules and software upgrades.

3

CADS AND PADS

Chemring designs and manufactures Cartridge Actuated Devices (CADs) and Propellant Actuated Devices (PADs) used for a variety of functions including crew egress and weapon systems. These products can also be used for a large variety of military and commercial functions ranging from crew egress and weapon systems to the activation of fire suppression systems in buildings and vehicles. Actions can be summarised as follows:• Puncturing containers (e.g. to release high pressure gas)

• Pushing mechanical loads (e.g. opening valves)

• Locking a device to prevent rotary or linear motion

• Releasing a device to enable rotary or linear motion

• Operating a sprinkler bulb

• Operating a switch or delay

• Cutting wires or small bolts

Pin Pullers and Pin PushersAlso known as protractors and retractors, our Pin Pullers and Pin Pushers are controlled-release mechanisms used in applications requiring instant detachment of structural fittings, mechanisms, rods, cables, booms or parachutes. After functioning as structural devices and carrying full tensile or shear loads, these products release upon command by an attached Chemring initiator. Full retraction or protraction of the pin is achieved by pressurized gas driving against the piston pin.

METRON ActuatorsActuators are highly reliable, compact single shot devices which can push, pull, cut or shear with a power-to-weight ratio in excess of 10,000:1. They operate within milliseconds of receiving the appropriate electrical impulse, a rate which is almost impossible to achieve with a mechanical source of energy. Actuators are ideal for remote controlled applications.

Ejection Release UnitsCartridge Ejection Release Units (CERUs) provide gas pressure to operate Aircraft Ejector Release Units (EJUs), for stores ejection on combat aircraft.

Gas GeneratorsGas Generators are self-contained units that can either be electrically or percussion operated. Typical operating times vary between 25 milliseconds to 250 seconds with operating temperatures in the range of -32°C to + 60°C. Specialised propellants can be incorporated to extend the temperature range from -54°C to +150°C. Typical applications include:• Fluid Displacement

• Liquid Fuel Igniters

• Pressurisation of hydraulic power supplies

• Ejection Release Units

• Buoyancy Devices

• Inflation of flame retardant fabric structures

Other CAD / PADs• Igniters and Fuseheads

• Detonators

• Cutters

• Explosive Bolts

• Release / Low Shock Bolts

• Separation Nuts

• Detent Actuators

4 5

COMMERCIAL AEROSPACE

Chemring has successfully expanded to commercial aerospace and passenger safety systems, providing critical pyromechanisms for use on-board commercial aircraft. Chemring provides pyrotechnic bottle cutters to initiate the aircrafts’ Emergency Oxygen system, enabling the immediate release of oxygen from the overhead oxygen supply masks. Chemring is the sole source provider for the explosive spoiler actuator override system used on the Boeing 767 in case of a malfunction during landing.

Emergency Oxygen System InitiatorChemring’s Emergency Oxygen System Initiator or ‘bottle-punch’ quickly and reliably allows an emergency flow of oxygen to commence as part of the passenger emergency oxygen system.

Working with the leading supplier, advantages over existing systems include greatly reduced weight (25% mass of existing systems), lower cost and greater efficiency over existing systems.

SeparatorsChemring supplies Tension Rod separators for use on helicopters, which prevent critical parts from loosening under extreme vibration and temperature conditions.

The link and clamp separators are designed to delink the retractable gear doors allowing deployment of the emergency flotation system. The assembly is designed to survive hydraulic fluid, aircraft fuel and salt water environments.

Chemring also provides spoiler override actuators for the Boeing 767.

SPACE

Chemring is a leading space component supplier, with a 55 year heritage proven through key space programmes, including the Atlas, Delta and Titan family of launch vehicles, space exploration vehicles and satellites. Our products include low shock pyrotechnic satellite separation systems and space-qualified initiators.

POWER CARTRIDGES, SQUIBS & INITIATORS.Our power cartridges create high-heat, high-pressure combustion energy by igniting the pyrotechnic mixture inside a controlled chamber. The power cartridges (aka initiators) are hermetically sealed electro-explosive devices characterized by their compactness, lightness in weight, environment/corrosion resist-ance and extremely high reliability (.9999). NASA Standard Initiator

We have manufactured power cartridges, including the NASA Standard Initiator (NSI) for over 20 years without a single failure. We are the primary qualified source for the NASA Standard Initiator (NSI) used for all initiation functions on the Space Shuttle. The NSI, available only through NASA performs from an incredible low temperature of -420°F to a high of +300°F. PC-23 Initiator

Our PC-23 initiator is the commercial equivalent (i.e. non-ITAR) to the NASA Standard Initiator (NSI) and is designed as a standard unit to provide high pressure energy for the initiation of energetic trains, separation devices, cutters and actuators. Pro-grammes using the PC-23 initiator include Ariane 5, Galileo, Eurostar E3000, ExoMars and many others. Chemring Energetic Devices has produced in excess of 250,000 PC-23 Initiators to-date with 100% mission success. ACTUATORS & RETRACTORSOur space qualified pyrotechnic and pneumatic actuators produce motion quickly, accurately and reliably. A pushing, pulling or rotating motion can be supplied for the most complex systems, including inlet door opening, arming/safing, stage separation, stores release/eject, payload release, hatch/door removal or silo door opening.

SEPARATION SYSTEMS

As a trusted supplier of space qualified components, Chemring products are designed to operate under extreme conditions. Our Separation Systems can reliably undertake a range of mission critical functions, with guaranteed levels of performance and reliability. Such functions might include the release of structures or components such as multi-stage launch vehicles, separation of nose cones and capsules, or the release of booster rockets, tanks and other jettison equipment. Pyrotechnic Separation Nuts

General features include lightweight, high-load capability, extremely low shock output with complete gas and particle containment. These nuts actuate on very low pressure with large bolt insertion tolerance. Chemring also supplies ultra-low shock separation nuts, using a similar design. Non-Pyrotechnic Separation Nuts

We have developed an extreme low-shock output, non-explosive

separation nut. These nuts are actuated by a miniature electric motor on low energy with large bolt insertion tolerance. Unique features include 25 times resettable and reusability, and eliminates the need for disassembly. Separation Bolts

Our separation bolts are designed and manufactured for use in applications where rapid structure separation is demanded. Chemring’s Separation Bolts have been fully qualified for fairing separation on the ATLAS and DELTA launch vehicles. Bolts do not fragment; rather, they separate into two parts, one of which is ejected from the structure. Cutters (Bolt, Rod and Cable)

Chemring cutters are designed for robustness and can be used in space as well as in deep submergence applications, for cutting reefing lines, electrical cables, steel cables or aluminium, titanium and steel bolts or rods. Over the past 20 years, our cutters have demonstrated high reliability on countless earth-orbital missions. Chemring cutters are built with the option to be single blade or mechanically redundant.

76

8

MISSILES

Chemring supplies a wide range of components supporting a number of critical missile, bomb and torpedo programmes across an international military customer base.

LAUNCH AND FLYChemring manufactures actuators, retention mechanisms, motors and weapon release cartridges to enable a range of ‘Launch and Fly’ activities. Typical cartridge operating times are from 0.01 seconds to 10 seconds with operating temperatures from -32°C to +60°C, although specialised propellants can be incorporated to extend the range from -54°C to +150°C. Other valves and separation systems allow fluid/gas flow and enabled sequenced launch and fly events.

Firing Cables

Low altitude firing cables that are 360° shielded for EMC/EMI protection.

Piston Actuators

Used to crush a fuze, in order to start an explosive train or to arm a Safe and Arm device.

Bridgewire Initiators

Low voltage, dual hot bridgewire cartridges that initiate numerous components on a platform, including ignition of a gas generator for missile launch.

Separation Nuts

To attach the aft of a missile to a shipping canister or capsule launching system and to restrain it until initiation.

Cable Cutters

Electrically initiated cable cutters sever electrical cable bundles either prior to launching, or during flight.

High-pressure Pneumatic Cylinders

These are used to start a sequence of control surface deployments, such as opening an inlet door to a sustainer motor.

Lug Retraction Devices

Upon actuation of a cartridge, a spring loaded spreading rod extends to retract lugs into the missile body to reduce its radar cross section.

Wing and Tail Retention Mechanisms

Used to retain missile wings/tails during storage. Upon actuation, a frangible pin fails allowing missile wings/tails to rotate into a deployed orientation.

Wedge Retention Mechanisms

Designed to hold aerodynamic features in place during flight. Upon initiation, features are allowed to release from the missile.

PYROMECHANICAL VALVESChemring supplies a number of pyromechanical valves, designed to be lightweight and reliable, which are critical to the liquid and gaseous fluid systems for complex missile programmes. Valves can be either designed in a ‘normally open’ or ‘normally closed’ configuration, which ensures that valve combustion gases are fully contained. Valves are typically associated with fuel flow and are initially designed to isolate fuel during storage, by sealing it within the fuel tank. Upon actuation, these valves allow unrestricted fuel flow to the missile and in parallel, unrestricted flow of pressurized air back into the fuel tank. Our valves are also employed in missile Divert and Attitude Control (DAC) systems.

SAFE & ARM UNITS (SAUS) AND FLIGHT TERMINATION Our electro-mechanical safe arm devices provide dual explosive output for remote safing/arming and subsequent initiation of ordnance items. Our fully qualified products are suitable for system use and target drone applications. Chemring designed, developed and qualified the SAD-505 for the US Air Force F-4 target drone. Qualified to MIL-STD-1516, this device provides remote arm and dual initiation for ordnance products. It features remote indication status and remote or manual safing.

9

MISSILES

DEMOLITION STORES

RELATED PRODUCTS

Chemring manufactures rocket motors and other missile components that are used in a range of international missile programmes. We have a strong track record in the design, manufacture and integration of fuzes and warheads. In addition, we offer alternative devices (not based on pyrotechnics or pyromechanisms) which perform similar functions, such as our electronic firing systems.

OTHER ELECTRONIC SUBSYSTEMSElectronic Safe Arm Fuze

Our electronic Safe Arm Fuze utilizes an Exploding Foil Initiator (EFI) and is the first fully electronic, range qualified, flight termination system. EFIs provide short, precision firing times. Our

system is a dual-mode, single-channel, fully electronic safe arm fuze with a removable keylock assembly. Its function is to preclude premature arming and consequent initiation of the detonator during transportation, handling, pre-launch and launch conditions. It also functions when commanded to terminate flight (missile destruct) during missile fly out. Acoustic Firing Devices

Acoustic Firing Devices are part of essentially non-magnetic equipment used in the proximity of magnetic influence ordnance. It provides US Navy divers with a safe firing system for underwater demolition operations.

Chemring’s range of Demolition Store products has been designed, tested and produced to the most exacting international standards demanded by our key customers including the UK Ministry of Defence and the US Department of Defense. We offer the highest integrity of design and manufacture, coupled with outstanding reliability and performance to make our products the choice of both Field Engineers and Special Forces worldwide.

PRODUCTS:SABREX

SABREX is a flexible linear cutting charge designed to release a fine, fast and stable cutting jet to defeat a wide range of target materials. It contains DPX9, an RDX-based plastic explosive which has been specifically developed for this application. SABREX is the most highly-developed explosive cutting tool on the market and provides Demolition Engineers, Breachers, EOD Specialists and Special Forces with an outstanding capability on land and a unique capability under water.

PE8

PE8 is a plastic explosive which is mouldable by hand to form demolition charges of various shapes and weights without leaving residue on the hands. PE8 is fully compliant with the UN Convention on the Marking of Plastic Explosives for the Purposes

of Detection and is an insensitive RDX based High Explosive suitable for EOD or general demolition tasks. The specially formulated insensitive explosive composition provides a high level of safety whilst maintaining peak performance for metal cutting. It is waterproof and may be deployed underwater if necessary.

Charge Demolition Sheet Explosive – SX4 (DPX9)

Sheet Explosive SX4 is an insensitive RDX-based, high explosive suitable for explosive ordnance disposal or general demolition tasks. The specially formulated explosive composition provides a high level of safety whilst maintaining peak performance for metal cutting where minimum shock wave and noise levels are required. SX4 may be used underwater if required and is easily cut with a sharp knife or scissors into precise shapes to match the charge to the target.

Bangalore Torpedo

Chemring’s Advanced Performance Bangalore Torpedo is a 1 meter long, aluminum body filled with 2kg of High Density Pressed Explosive. It is designed to provide enhanced blast and fragmentation capable of cutting up to 6mm steel plate and defeating razor wire and other barricades. Up to 8 tubes can be joined quickly for deeper breaching.

Other Products

Chemring also supplies a range of Ancillary Equipment including Detonating Cords and Boosters, Electric and Non-Electric Detonators, and Fuzes.

10 11

© Chemring Group PLC Sept 2017The information in this document is the property of Chemring Group PLC and may not be copied or communicated to a third party or used for any purpose other than that for which it is supplied without the express written consent of Chemring Group PLC. This information is given in good faith based upon the latest information available to Chemring Group PLC; no warranty or representation is given concerning such information, which must not be taken as establishing any contractual or other commitment binding upon Chemring Group PLC or any of its subsidiary or associated companies.

03936

Chemring Energetics UK Ltd

www.chemringenergetics.co.uk

Chemring Nobel AS

www.chemringnobel.no

Chemring Energetic Devices, Inc.

www.chemringenergeticdevices.com