ene-pbs-folder eng mnbattery current system current max dc-effect energy life dimensions weight...
TRANSCRIPT
Power Balancing Storage Buy electricity when it’s cheap - use it when it’s expensive
Store solar energy- use it when you need it most
Boost car charging capabilities- charge faster or add more cars
Don’t worry about power outages- works on and off mains
Eliminate peak loads- lower your electricity bills
Cloud based system- monitor and control any-where at anytime
TROUBLE FREE POWER FOR PROPERTY OWNERS
The solution to our upcoming energy problems lies in balancing the amount of power available in a property. This means storing the energy when, for example, the sun generates it or when electricity is cheapest to buy. You can then use it when demand is high during peak periods, which is usually when it’s most expensive.
Power balancing: at the heart of modern real estate planning
Power balancing is an easy to install plug-n-play sys-tem that can be scaled to meet the kWh needs of any property. You can manage and control your system re-motely, whenever and from wherever you want. Thanks to the robust energy storage batteries, the system is designed to function equally as well in Nordic tem-peratures as hot Mediterranean climates, even when installed outdoors.
The brains of the system continuously monitors, opti-mizes and balances yourelectricity consumption.
Three phase power balancing
Calculate directly online - use our online guide www.enequi.com/pbs Telefon: +46 (0)10 122 17 00Adress: Kung Hans väg 3, 192 68 Sollentuna, SWEDEN
Your contact - our dealer
BatteryQubeSpecifi cations
General DataNumber of batteries
Battery Type
Battery current
System current
Max DC-effect
Energy
Life
Dimensions Weight
Depth
Height
Width
BQ5 / BQ64 pack
Nilar Hydride®
120 / 144 V
480 V / 576 V
5 kW / 6 kW
5 kW / 6 kW
20 Years +
207 kg
305 mm
945 mm
900 mm
General data Max power
Max current
Number of phases
Rated voltage
AC voltage range between L and N
AC voltage range between L and L
Dimension
Weight
Installation
Temperature range
Humidity
Compliance
BQ10 / BQ128 pack
Nilar Hydride®
120 / 144 V
480 V / 576 V
10 kW / 12 kW
10 kW / 12 kW
20 Years +
350 kg
500 mm
950 mm
600 mm
OGQ-Box-M318 kWA
30 A
3 ph
230 V
187 V – 251 V
324 V – 436 V
[ 300*280*121 mm ]
<5 kg
Wall mounted
-25 to 60 C
<95% RH
Lead free, meets RoHS GP2
OGQ-Box-L327 kWA
45 A
OffgridQubeSpecifi cations
[email protected] www.enequi.com
Find the optimal power balancing system for your needs
ProductguideAll models are available in battery and hybrid versions
Getting started with the right solution:
Specifi cation MODULAR DESIGN PROOUTDOOR CABINET INDOOR CABINET
Inverter
Battery
Island mode
Car charging
Enequi inverters are available for existing or newly installed solar panels. The smart units effectively manage your power and can handle the sale and purchase of electricity from the grid, as well as storing and converting solar power to household electricity. Battery inverters are best suited for when you want instant access to large amounts of power, or
The Enequi system can be connected to the cloud for easy monitoring, updating and programming. You can instantly access it in the app or via the web. And, if you need sup-port or service, a technician can help you remotely.
Energy can be stored directly from solar panels or from the mains. The Hydride® chemistry and advanced construction of Nilar batteries, provides benefi ts such a wide temperature range, long service life, full recyclability, and complete safety. The batteries are also fully scalable so you can get the required kWh to meet your power balancing needs.
The Offgrid Qube automatically switches to Island mode when there is a power outage. This means you can use stored energy or continue to produce energy from your solar panels. Exactly where power should be directly in a property during a power outage can be easily confi gured in the app via our E-Nodes or by physically disconnecting power in the
AC charging with built-in charge control protects your el-central/distribution box? and fuses. Automated phase allocation and load controller minimize uneven distribution caused by 1 or 2 phase charged cars. This simplifi es installation compared to charging boxes and charging posts. You can also program the system to use renewable energy from solar panels when
Do you have solar panels or are you planning on installing them?
Discover the optimal solar set-up for your property
Decide if you want to be unaffected by power outages
Enter how many cars you want to charge
5-12 kWh
2 chargers
5-6 kWh 5-12+ kWh (extendable)
2 chargers
12+ kWh (scalable)
10+ chargers
InverterSpecifi kation
Input - DC (Battery)
Supported Battery Types
Max. Charging / Disch. Power [W]
Operating Voltage Range [V]
Max. Charging Voltage [V]
Max. Charging Current [Al
Max. Discharging Current [Al
lnput - DC (PV)
Max. Input Power [W]
Max. Input Voltage [V]
MPPT Voltage Range [V]
Rated Voltage [V]
Output - AC (Loads/Grid)
Rated Power [W]
Rated Voltage [V]
Max. Current Output [Al
Output - AC (Backup Power)
Rated AC Power Output [W]
Rated Voltage Output [V]
Rated Frequency Output [Hz]
THD
General Data
Operating Temp. Range [0(]
IP Protection Class
Cooling
Noise [dB]
Interface
Dimension (W * H * D) [mm]
Weight [kg]
Display
Certifi cation & Standard
Protective Devices
AC Short-circuit
DC Reverse Polarity Protection
DC Switch
Surge Protection
Li-ion / NiMH
4000 I 4000
120 - 700
700
18
18
5200
855
150 - 800
670
5000
3N ~ 400
8
5000
3N ~ 400
50
<3%
-25 to +60
(>45 derating)
IP 65
Forced air cooling
55
CAN / RS485 / WIFI
473 * 595 * 233
40
LCD
Li-ion / NiMH
8000 I 8000
200 - 800
800
20
20
9800
900
200 - 800
670
9800
3N ~ 400
15.2
9600
3N ~ 400
50
<3%
-25 to +60
(>45 derating)
IP 65
Forced air cooling
55
CAN / RS485 / WIFI
540 * 670 * 275
55
LCD
Li-ion / NiMH
6000 I 6000
200 - 800
20
20
6000
3N ~ 400
9.6
-25 to +60
(>45 derating)
IP 65
Forced air cooling
55
RS485
408 * 548 * 231
<26
LCD
Li-ion / NiMH
18000 I 18000
250 - 800
40
40
18000
3N ~ 400
28.7
17800
3N ~ 400
50
<3%
-25 to +60
(>45 derating)
IP 65
Forced air cooling
55
RS485
540 * 670 * 275
<48
LCD
VDE-AR-N 4105/08.11, E DIN VDE V 0124-100/10.13, IEC/EN 62109-1:2010, IEC/EN 62109-2:2011, IEC/EN 61000-6-2:2005, IEC/EN 61000-6-4:2007 +Al
VDE-AR-N 4105 , IEC 62477
H52 H98 B60 B180
2
1
3
4
Discover the optimal solar set-up for your property
Use our online confi gurator at enequi.com/pbs
1 charger
Modular design, – create your own system with individual parts. Requi-res a little more installation work than a ready packaged solution.
Indoor and Outdoor cabinets – these come complete and ready for quick and easy installation. All units meet the same building standards as refrigerators and heat pumps (see bottom of page for dimensions).
PRO solutions – made according to bespoke needs, such as larger instal-lations that require many features.
* Dimension (W * H * D) [mm] INDOOR CABINET: 500*600*1900 OUTDOOR CABINET: 500*1200*950