end suction back pull out centrifugal pump
TRANSCRIPT
CENTRIFUGAL PUMP
A M a r k o f Q u a l i t y
CONSTRUCTIONAL FEATURES :HC pumps are single stage, single suction, horizontal spindle type. They are made in accordance withDIN 24255.
CASING :High efficiency volute type. Suction and dischargenozzles as well as the supporting feet are cast integralwith the casing.
IMPELLER :Enclosed type and accurately balanced dynamically. Hydraulically balanced by back vanes and for large impellers by balancing holes.
SHAFT :Three shaft units cover complete range of HC pumps. Made of high tensile steel and accurately ground all over.
CENTRIFUGAL PUMP
STUFFING BOX :Available with suitable gland packing. Mechanical seal arrangement available upon request.
DIRECTION OF ROTATION :Clockwise when seen from driving end.
FLANGES :As per DIN 2533. Drilling as per ASA/BS also available.
MATERIALS OF CONSTRUCTION :Available in different combinations of cast iron, bronzeand phosphor bronze for the main components.
CENTRIFUGAL PUMP
CENTRIFUGAL PUMP
APPLICATIONS :For pumping clear or turbid water upto 3000 ppm.Ideally suitable in circulating systems in industry,irrigation, sprinkler system, booster service,fire fighting, air-conditioning, pumping liquids havingtemperature in the range of - 10° C to 100° C.
TECHNICAL SPECIFICATIONS :Head : upto 100 mtrs.Capacity : upto 400 cu.mt/hrRPM : 2900 / 1450Drive : MotorShaft Seal : Gland / Mechanical seal
CENTRIFUGAL PUMP
CROSS SECTION VIEW
CENTRIFUGAL PUMP
PE
RF
OR
MA
NC
E
CH
AR
AC
TE
RIS
TIC
S
CENTRIFUGAL PUMP
PE
RF
OR
MA
NC
E
CH
AR
AC
TE
RIS
TIC
S
A M a r k o f Q u a l i t y
ISO 9001 Company
Office & Factory :
MBH Pumps (Gujarat) Pvt. Ltd.
Plot No. 14, G.I.D.C. Indl. Estate, Naroda,Ahmedabad - 382 330, India.Phone : +91-79-2282 3066, 2282 1018 Mobile : +91-9879730778Fax : +91-79-2282 1511E-mail : [email protected]
Visit us at : www.mbhpumps.com