encap systems7192010 7 21-10
TRANSCRIPT
ENCAP ENCAP SYSTEMSSYSTEMS“Encapsulating and
Protecting building systems for a stronger tomorrow”
www.theencapgroup.com
www.encapseal.com
INDUSTRY QUANDARIES
STUCCO IMPROPERLY APPLIED NO VAPOR BARRIERCRACKED STUCCO/BRICK/
CONCRETE WALLS ROOFING COVERING MATERIALS ELEVATED SLABS BASEMENT WALLS DAMPNESS
MULTI FAMILY & COMMERCIAL STANDARD PROBLEMS ARE WATER INTRUSIONS
THRU:
INDUSTRY QUANDARIES CONT’D
• More durable and cost effective than any of the other thirteen EPA approved systems of lead based paint encapsulation
• Water resistant, but it allows the sub-strait to dry behind the coating
• Extensive positive performance record for the past 30 years
INDUSTRY QUANDARIES CONT’D
• Safe Product – easily applied
• Eight standard colors
• Extreme adhesive to most surfaces
• Dries to 4500 PSI
COMPETITIVE ADVANTAGES
Only Cementitious based coating system in the US approved by the Health Departments and the EPA in all 50 States More cost effective than traditional stucco applications Moisture resistant and allows for breathability Extensive positive track record and testimonials Moisture curing capabilities Easy application process Extensive color pallet Extreme adhesion and compaction strength
Past Performance Dewberry & Davis Study Andros Island Navy Sub Base Patuxten Naval Air Station Ohio Adjutant General Army New Haven Court House
Authority Oakland Housing Authority Patrick Air Force Base Veteran’s Hospital-
Oakland,CA Veteran’s Hospital- Vieira, FL
Veterans Hospital, Orlando, FLF.D.O.TTyndall Air BaseGreater Orlando Aviation AuthorityOrlando Expressway AuthorityVirgin Islands Port Authority/ Marine & AirFederal Emergency Management AgencyHomestead Air BaseFt. Myer, Arlington, VAOrlando Utilities Commission,
Orlando, FL
Potential Projects
• Enviro Tubes
• Gabion Baskets
EnviroTubes
Enviro -Tubes currently deployed, shoreline protection and wetland re-nourishment systems.
Currently for Enviro -Tube protection, we are the only manufacturer of a coating system that “significantly” adherers to the petroleum based Bag Fabric.
Gabion Baskets
The Encap Group, LLC
U.S. ARMY CORPS OF ENGINEERS (USACE)
TEMPORARY FLOOD PROTECTION
• SYSTEMS DEGRADATION
Examples of Past Performance
Wall Repair
The Encap Group, LLC
BRICK RESTORATION/ENCAPSULATION
Bethune Cookman College, Dayton Beach, FL
The Encap Group, LLC
ENCAP SEAL
Water Intrusion Test
ASTM 1601
The Encap Group, LLC
RESULTS
.083 Gallons/ hour intrusion
(.375 Gallons/ hour intrusion considered excellent)
The Encap Group, LLC
Asbestos&
Lead
The Encap Group, LLC
Historical Renovation/Preservation
Lead Abatement/Encapsulation
• Preserves a historical building’s appearance while abating the lead
based paint or asbestos wall cladding
EXAMPLES OF PRODUCT USEWATER PROOFING ON WALLS AND ROOFS
OUC Water Storage Tank,Lake Highland Orlando, FL
Encap Seal was applied as a roof coating this water Tank.
Allowing heavy lift crane to traverse without damage to The coating.
As a water proof coating on concrete /stucco walls
PRODUCT SPECS Environmentally friendly Designed to encapsulate lead based
paint
Encapsulates some forms of asbestos
Adheres to most sub-straits Encap Seal achieves maximum
strength of 4500 PSI in 28 days Pro-Tec-Coat achieves maximum
strength of 6000 PSI in 28 days
NAICS CODES:
236115, 236117, 236220, 237310, 238350, 238990, 238110, 238140, 238310, 238340, 238910, 321114, 337110, 321911, 332323, 325510, 541310, 541320, 561790, 561730, 541620, 562910.
COMPETITIVE ADVANTAGESComparison Study of Landing and Patio water proofing systems
Products/ properties SONOGUARDVULKEM 350/351 ENCAP SEAL
Product base/ make up Polyurethane/paint Polyurethane/paint Cementitious/mortarBonds to smooth surfaces no no Extremely wellLevel of surface prep required extensive extensive- moderate minorWater proofer yes yes yesAllows for water vapor release no no yesAvailable colors standard/limited standard/limited standard/unlimitedInstalled applications 3 parts 2 parts 1 part
Tensile strength/ASTM C-780/D-412 752 320530 PSI w/o fabric. W/ fabric exceeds 2500psi
Compressive strengths N/A 2200psi 4500psiAdhesion/ peal strengths 275psi 30psi 406 psiColor application topical applied through-out through-outslip resistance topical applied sand topical applied sand product finish & textureMoisture curing yes no yes
bridging limitations 1/16" max 1/16" max1/2" or < w/o mesh
1/2" or> w/ meshPackaging/ coverage 50-80 sqft/gallon 40 & 100 sqft/gallon 40sqft/50lb bagapplication thickness 25/25/20 wet mills 40 & 15 wet mills 1/8"-1/4" min.abrasion resistance ASTM D-4060 1000 cycles 1000 cycles exceeds 1000 cyclesWeatherization/ UV exposure N/A N/A ImperviousWarranty N/A on product only 5 years L&M
Application RisksCombustible liquid and
VaporCombustible liquid and
Vapor noneRequires maintenance agreement for warranty Yes n/a NoCan be Pressure washed No No Yesdamaged by sharp objects, sand, gravel metal yes yes no
Storage/shelf life1 year/with proper
storage n/aUnlimited w/proper
storageClean up Reducer 990 or xylene Reducer 990 or xylene water
Manufacturers: BASF® Tremko, IndustriesThe Encap Group, LLC
The Chemical company
ENCAP ENCAP SYSTEMSSYSTEMS
THE BEGINNING