en sanitär 2014 - knipex · 85 01 250 32 5 ... hqt eqohqtvcdng ewvvkpi tgrgvkvkxg ewvvkpi qt gzvt...
TRANSCRIPT
www.knipex.dewww.knipex.dewww.knipex.dewww.knipex.de
86
03
15
0
86
03
18
0
HEATING/PLUMBING RANGE
86
03
12
5
86
03
30
0
86
03
25
0
86
03
40
0
Pliers Wrenches pliers and a wrench in a single tool
replaces the need for sets of metric and imperial spanners
directly on chrome!
components
for strong gripping power
Article No.EAN 4003773-
Adjustment positions Inch mm mm
86 03 125 23
86 03 150
86 03 180
86 03 250
86 03 300 22
86 03 400
The unique installation tool now
also in 400 mm length, for opening
widths up to 85 mm / 3 3/8"
NEWThe mini pliers wrench:
for precision mechanics, particularly suitable
for working on small bolted connections,
86 03 400
86 03 125
2
KNIPEX Minis in belt pouch
made of hard-wearing polyester fabric
with practical belt loop
Alligator®-
SetCobra®-
Set
Bestseller-
Set
00
20
72
V0
1
00
20
72
V0
2
Article No.EAN 4003773- Content
00 20 72 V01
®
00 20 72 V02
®
Article No.EAN 4003773- Content
00 20 09 V03
Article No.EAN 4003773- Content
00 20 09 V02
Article No.EAN 4003773- Content
00 20 09 V01
®
Article No.EAN 4003773-
Adjustment positions Ø Inch Ø mm mm mm
87 21 250 2
87 22 250 2
Cobra® QuickSet Hightech Water Pump Pliers
Fully open, push, grab!
Additional fast adjustment on the workpiece also without pressing the push-button.
simply sliding the pliers handle
The gripping width of the pliers is then fixed and can only
completely opened again
Model 87 22 250:
collar for better handling and easier transport
Press the button – open pliers completely
Position jaw – simply slide and close pliers
Hinge bolt locks itself with the first workload
Cobra®
87 0
1 4
00 87 0
1 5
60
87 0
1 3
00
87 0
1 2
50
87 0
1 1
80
87 0
1 1
50
87 0
1 1
25
®®®®®®®®®®
3
Cobra® ES – Water Pump Pliers extra-slim
of head and joint area
long, narrow jaws
Article No.EAN 4003773-
Adjustment positions Ø Inch Ø mm mm mm
87 51 250 32
Cobra®
Hightech Water Pump Pliers
and a comfortable handle width
Article No.EAN 4003773-
Adjustment positions Ø Inch mm mm
87 01 125
87 01 150
87 01 180
87 01 250 2
87 01 300
87 01 400
87 01 560
Cobra® XL (87 01 400):
greater gripping capacity but much lower
weight than comparable pipe wrenches.
Large gripping capacity of 95 mm,
would require a 3-inch pipe wrench.
4
Raptor Pliers
SmartGrip®
Water Pump Pliers with automatic adjustment
Article No.EAN 4003773-
Adjustment positions Inch mm mm
87 41 250
Article No.EAN 4003773- Ø Inch Ø mm mm mm
85 01 250 32
5
Allig
ato
r®
5
Alligator® – Water Pump Pliers
Alligator® XLThe classic model, now also in 400 mm length
joint area
gripping
Article No.EAN4003773-
Adjustment positions Ø Inch Ø mm mm mm
88 01 400
The KNIPEX Alligator® XL offers the performance and comfort of a water pump pliers while being 50 % lighter in weight and having a greater gripping capacity (3 ½") than comparable pipe wrenches. With their handy length of 400 mm, there is a place for KNIPEX Alligator® XL in every tool box.
Article No.EAN 4003773-
Adjustment positions Ø Inch Ø mm mm mm
88 01 180
88 01 250 2
88 01 300
6
83 60 010
83 61 010
Pipe Gripping Pliers
ideal for tightening and releasing
Art. 81 13 230
Pipe Wrenches 90°
jaws with offset teeth in opposite direction
hardened I-beam handle design
83 10 01583 30 015
Pipe Wrenches S-Type with rapid adjustment
Article No.EAN 4003773- Ø Inch Ø mm Ø Inch
Clamping width mm mm
83 60 010
83 60 015
83 61 010
83 61 015
Pipe Wrenches S-Type
jaws with offset teeth in opposite direction
hardened three-point contact on pipes,
Article No.EAN 4003773- Ø Inch Ø mm Ø Inch
Clamping width mm mm
83 10 010
83 10 015
83 10 020 2
Article No.EAN 4003773- Ø Inch Ø mm Ø Inch
Clamping width mm mm
83 30 010
83 30 015
83 30 020 2
Article No.EAN 4003773- Ø mm mm
81 03 230
81 13 230
81 13 230
7
EAN 4003773- Ø MM Ø MM Ø MM MM² MM
02 02 180
02 02 200 2,2
02 02 225
02 06 200 2,2
03 02 180
02 02 180
02 06 200
High Leverage Combination Pliers
Combination Pliers
26
16
20
0
26
15
20
0
26
25
20
0
26
26
20
0
Snipe Nose Side Cutting Pliers (Stork Beak Pliers)
distortion-tolerant, elastic precision tips
Article No.EAN 4003773- Ø mm Ø mm Ø mm mm² mm
03 02 160
03 02 180
03 02 200
03 06 200
Article No.EAN 4003773- Ø mm Ø mm mm
26 15 200
26 16 200
26 25 200 40°
26 26 200 40°
soft wire hard wire piano wire wire rope
Article No.EAN 4003773- Ø mm Ø mm Ø mm mm² mm
02 02 180
02 02 200 2,2
02 02 225
02 06 200 2,2
8
73 02 160
73 05 160
73 06 160
70 02 160
70 06 160
Diagonal Cutters
Article No.EAN 4003773- Ø mm Ø mm Ø mm mm
70 02 125
70 02 140
70 02 160
70 02 180
70 06 160
soft wire hard wire piano wire wire rope
40 % less effort required
compared to diagonal cutters
of the same length
X-Cut® – Compact Diagonal Cutters
Compact and 20 % less weight. Powerful and precise.
Cuts finest strands as well as multi-core cables and piano wires.
Article No.EAN 4003773- Ø mm Ø mm Ø mm Ø mm Ø mm mm
73 02 160
73 05 160
73 06 160
9
74 06 200
74 02 180
73 71 180
Extremely easy cutting with little strain:
cuts again 50 % easier than tried
high leverage diagonal cutters
TwinForce® – High Performance Diagonal Cutters
The superior High-Leverage Diagonal Cutter with patented double joint
precisely milled forged-in axles
73 72 180 F:
High Leverage Diagonal Cutters
Article No.EAN 4003773- Ø mm Ø mm Ø mm mm
74 02 160
74 02 180
74 02 200
74 02 250
74 06 200
Article No.EAN 4003773- Ø mm Ø mm Ø mm Ø mm mm
73 71 180
73 72 180
73 72 180 F
10
20°
71 22 200
71 01 200
71
32
20
0Article No.
EAN 4003773- Ø mm Ø mm Ø mm Ø mm mm
71 01 200
71 02 200
71 12 200
71 22 200 20°
71 32 200
71 41 200 20°
CoBolt® – Compact Bolt Cutters
Improved cutting performance
Micro-structured cutting edge allows easy cutting of large cross-sections
With gripping surface below the joint for gripping and pulling wires with a diameter as from 1.0 mm
Art. 71 12 / 22 / 32 200
Art. 71 22 200
Art. 71 32 200
Art. 71 41 200
71 01 / 02 / 12 und 71 32 200 gripping surface below the joint
71 01 / 02 / 12 200 micro-structured cutting edge
soft wire hard wire piano wire wire rope
11
Mode of operation of straight cutters
An incision is made in the red area
Electricians’ Pliers
for gripping and bending wire
with precision stripping holes
Self-Adjusting Insulation Strippers
stripping blades and clamping jaws easily replaceable
MultiStrip 10 Automatic Insulation Stripper
Improved knife geometry – robust and more durable
Optimised handle design with more comfort
Recessed wire cutter
Article No.EAN 4003773-
Stripping capacities
mmmm² AWG
12 40 200
Article No.EAN 4003773-
Stripping capacities
mmmm² AWG
12 42 195
Article No.
EAN
4003773-Stripping capacities
mm2 Ø mm Ø mm mm
13 01 160
13 02 160
12
16 80 125 SB
16 85 125 SB
16 90 130 SB
97 33 02
Crimping Pliers for end sleeves (ferrules)
Now also as VDE version
30 % easier crimping due to improved leverage
more light and slim design
Universal Dismantling Tools
16 85 125 SB:
telescopic blade inside
Article No.EAN 4003773-
Stripping capacities Ø mm Types of cables mm
16 80 125 SB Ø
16 85 125 SB Ø
16 90 130 SB Ø
Article No.EAN4003773-
CapacityNumber of
crimping positions mmmm² AWG
97 71 180
97 78 180
KNIPEX MultiCrimp®
Now also for insulated and non-insulated end sleeves (ferrules) 10 / 16 / 25 mm²
Universal indent crimping die for non-insulated connectors
available from 09/2014
Article No.EAN4003773- Applications
Capacitymm² AWG mm
97 33 02 ®
13
Pipe Cutter for plastic conduit pipes and hoses
Pipe Cutter for plastic conduit pipes
blade is replaceable and can be retracted from any position
and incremental ratchet blade feed
Notching Pliers
special pliers for notching recesses into plastic ledges and plastic casings for electric and sanitary installation
easy handling
Pipe Cutter for composite pipes and protective tubes
potentially pipe inside
example for Geberit composite pipes
Pipe Cutter for composite and plastic pipes
and composite pipes with diameters
Article No.EAN 4003773-
Cutting capacities Ø mm mm
90 20 185
Article No.EAN 4003773-
Cutting capacities Ø mm
Cutting edge length mm mm
94 10 185
Article No.EAN 4003773- Capacity mm
90 61 16
Article No.EAN 4003773-
Cutting capacities Composite pipes Ø mm
Cutting capacities Protective tubes Ø mm mm
90 25 20
Article No.EAN 4003773-
Cutting capacities Ø mm mm
90 25 40
14
Electricians’ Shears
Precisely ground blades
non-slip cut
Cutting edge with integrated cable cutter
With plastic belt case
Article No.EAN 4003773- mm
95 05 155 SB
Pliers for Electrical Installation The all-rounder for professionals
Multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves (ferrules)
6 functions in one pair of pliers
slim dimensions for easy access
13 91 200 / 13 92 200 / 13 96 200
13 86 20013 92 200
Cutting capacity
Article No.EAN4003773- Handles Ø mm mm² mm
13 81 200 plastic coated
13 82 200
13 86 200
13 91 200 plastic coated
13 92 200
13 96 200
soft wire hard wire piano wire wire rope
15
Cable Shears
operation
forged, oil-hardened
Combination Shears
sheets
Concreters’ Nippers
Article No.EAN 4003773- mm
95 05 190
Article No.EAN 4003773- Ø mm Ø mm mm
99 00 250
Article No.EAN 4003773- Ø mm mm² AWG mm
95 12 165
95 16 165
95 12 165
95 16 165
Tool Bag empty
and other standard tool cases
Article No.EAN4003773-
Dimension exterior width mm
Dimension exterior height mm
Dimension exterior depth mm
00 21 11 LE
KNIPEX Quality – Made in Germany
TwinKey®
10 profiles. 2 crosses. 1 key. All established locking systems. For all standard cabinets and shut-off systems
areas of facilities engineering (heating and sanitation, air conditioning,
weight-optimised zinc die-cast design
L100
027
39/0
1/06
.14/
PDF/
/EN
Article No.EAN 4003773- mm mm Ø mm mm mm mm
00 11 01
KNIPEX-Werk C. Gustav Putsch KG
Oberkamper Straße 13 42349 Wuppertal Deutschland
Tel.: +49 (0) 202 – 47 94-0 +49 (0) 202 – 47 74 94
[email protected] www.knipex.de