Ador Powertron Ltd Pune

Web Based Element Management

System

Ver 2.0/2010

USER MANUAL

Page 2 of 10

Open http:///ems page to access EMS. When you

do this, the below screen will appear:

1. Login: Enter user name and password for login.

Page 3 of 10

Page 4 of 10

2. Configuration

2.1 SNMP Configuration: By pressing this menu, below shown window will appear, in

which you can Add, Edit and Delete IP Address and its Location of Power Plant.

Before clicking on Edit button you need select Power Plant.

Page 5 of 10

2.2 NMS Configuration: By pressing this menu, below shown window will appear, in

which you can Add, Delete IP Address and its Location of NMS Server.

In this you can add up to maximum 5 numbers of NMS Server. In this you can link the

NMS Server to the Power Plant which you want to send the traps to selected NMS

Server.

Page 6 of 10

2.3 NMS Trap Configuration: This function allows you to configure traps to the NMS

Server. By clicking on this menu you will get the list of NMS Server and Traps. After

clicking on NMS Server you can select multiple traps to be sent to the respected NMS

Server at selected time interval.

Trap selection is password protected. Enter password "JET" to configure traps.

By pressing this menu, below shown window will appear

Page 7 of 10

Page 8 of 10

3. View

3.1 Power Plant Details: By clicking on this menu, you can see the power plant details.

Page 9 of 10

3.2 Alarm History: By clicking on this menu, you can see the alarms raised in your

system after selecting the desired field from the field select window.

Page 10 of 10

3.3 Trend: By clicking on this menu, you can see the trend for AC Mains Voltage,

System Output Voltage, and System Load for specified period.