ems goal’s and actual’s 2020 - external newsletter.pdf · christian gallardo – hose...
TRANSCRIPT
EMS Goal’s and Actual’s
Hydraflow establishes Environmental Management System (EMS)
targets at the beginning of the year then monitors and measures
progress throughout the year. At year end, the results are reviewed
at the Executive Management meeting. After reviewing the 2019 environmental objectives
and data, it was determined that Hydraflow was able to meet or exceed most of the EMS
goals that were set for the year. Please see below for year 2019 Goals vs Actuals, as well as
the goals that have been set for 2020.
In this issue:
EMS Article…………...1
Announcements......2 & 3
Safety Page………… ...4
Christian Gallardo – Hose Manufacturing
Jesus Pulido - Maintenance
Laura Rivera – Marking/Bagging
Ishmael Marquez – Machine Shop
George Chavez – Naces/ATP
Maria Quezada - Clamshells
(January through March 2020):
Adda Gutierrez (Quality Delegate Re-evaluation)
Aldo Martinez (ATP57012/57013 Hose Assemblies)
Cecilio Rodriguez (Inspection Re-evaluation)
Claudia Hernandez (Clamshell)
Claudia Hines (Quality Delegate Re-evaluation)
Daniel Hang (Pressure Test/Oxygen Clean)
David Watson (Quality Delegate Re-evaluation)
Eric Espinoza (Quality Delegate Re-evaluation)
Jorge Ayala (Pressure Test/Oxygen Clean)
José Milton Peña (Crimping)
Kasey Blan (Quality Delegate)
Kenneth Abbott (Quality Delegate Re-evaluation)
Kevin Dang (Quality Delegate Re-evaluation)
Linda Luong (Solder Operator)
Lorena Real (Quality Delegate Re-evaluation)
Luis Lopez (Dry Lube)
Maria Montes (Clamshell)
Natalie Rodriguez (Clamshell)
Patrick Acuna (Inspection Re-evaluation)
Pragna Patel (ATP57012/57013 Hose Assemblies)
Ruben Vazquez Lopez (Quality Delegate
Re-evaluation)
Rony Molina (Quality Delegate Re-evaluation)
Rudy Peña (Quality Delegate)
Samuel Harper (Solder Inspector )
Sandra Olivares (Inspection Re-evaluation)
Scott Oropeza (Dry Lube)
Tiffany Tran (ATP57012/57013 Hose Assemblies |
Solder Operator)