emi_emc_workshop_brochure
DESCRIPTION
Introduction to EMI-EMC - Philosophy of addressing EMI-EMC issues in life cycle of equipment.EMI Sources- Intentional &unintentional EMI sourcesEMI Standards- MIL-EN,SAE,CISPR&IECEMI Measurements- CE,RE,CS,RS,Transients and EMI Instrumentation test set up.- SE, Filter loss, Ground resistance/impedance etcDesigning for EMC- Design inadequacies and possible solutionsEMI Control techniques- Filtering, Shielding, Grounding,- Bonding, Layout designs, EMI gaskets etc. EMI/EMC Evaluation of PCBS- Basics of PCB EMI originSystem Level EMC /Case Studies- Middle level /Interaction testing& validation plansEMI Check- list &Summary- Power lines, Audio lines, control lines, RF/data linesEMI test Facilities- In-house test facilities for EMI testing, TFs for compliance.Computational Simulation of EMI/EMC- EMI (Electromagnetic Interference from cables and devices)- Immunity problems, especially related to extend¬ed conductor structures- Crosstalk problems- Filter problems- ESD (Electrostatic Discharges) - System Level simulation- Low frequency problems (H-field and E-field esti-mation)- From bench investigations on subsystems to systems in large platforms- EMI-EMC Simulation for antenna, PCB, systemsTRANSCRIPT
Email : [email protected],
Shreehari @ 9742350015 | Santhosh @ 9591994642 |
- Design, Development, Production Engineers involved in various electronic
product development
- Analysis, Simulation Engineers evaluating various systems & components
- Testing Engineers performing physical product testing
- Quality Assurance engineers certifying Electrical-Electronic Products for
EMI-EMC.
- Antenna Design, PCB Design, Cable Harness Engineers can participate
- Finally all those worked related to above field or wish to get the
knowledge of EMI-EMC can attend
Participants are encouraged to bring their product details, queries,
problem faced, Expert panel will guide to find the right solutions.
This workshop aims to bring the theory, testing, design and
analysis aspects of Electromagnetic interference threats to
Electronic system and equipment.
In today's high density electric system and devices, the goal
of Electromagnetic compatibility is of paramount
importance this course covers every basics of EMI-EMC,
EMI source, EMI-EMC standards, EMI-EMC control
techniques, measurements and proving the designs as EMC
solutions.
We plan to cover EMI-EMC Evaluation at CARD & System
level for Auto, Aero, Naval, Defense, Electronic Components
and consumer electronics with various case study. However
the theoretical part will be common for all domains.
Introduction to EMI-EMC - Philosophy of addressing EMI-EMC issues in life cycle of
equipment.
EMI Sources- Intentional &unintentional EMI sources
EMI Standards- MIL-EN,SAE,CISPR&IEC
EMI Measurements- CE,RE,CS,RS,Transients and EMI Instrumentation test set up.
- SE, Filter loss, Ground resistance/impedance etc
Designing for EMC- Design inadequacies and possible solutions
EMI Control techniques- Filtering, Shielding, Grounding,
- Bonding, Layout designs, EMI gaskets etc.
EMI/EMC Evaluation of PCBS- Basics of PCB EMI origin
System Level EMC /Case Studies- Middle level /Interaction testing& validation plans
EMI Check- list &Summary- Power lines, Audio lines, control lines, RF/data lines
EMI test Facilities- In-house test facilities for EMI testing, TFs for compliance.
Computational Simulation of EMI/EMC- EMI (Electromagnetic Interference from cables and devices)
- Immunity problems, especially related to extended
conductor structures
- Crosstalk problems
- Filter problems
- ESD (Electrostatic Discharges) - System Level simulation
- Low frequency problems (H-field and E-field estimation)
- From bench investigations on subsystems to systems in
large platforms
- EMI-EMC Simulation for antenna, PCB, systems
Topics Covered
Key Note Speaker Profile
Dr. Srinivasan Sathyamurthy
He joined DRDO as Scientist 'B' in Nov'1977 after serving for four years as Tech Asst.
in Vikram Satellite Earth Station, Arvi. At CVRDE, he was instrumental for establishing
a state of art EMI-EMC test facility (1989) and system engineering of Communication
facilities. Contributed for the success of MBT Arjun Electronics and Communication.
Developed an innovative Telemetry system under his directions to monitor the
functional parameters of Tanks. As Project Director, completed a Study project viz.
Integrated Future Combat Systems and Configured a Tracked Command post vehicle
leading to successful field trials by Army and User approval for production by
M/s. BEL. Established a Research Division at CVRDE to develop unmanned
tele-operated vehicles for the Robotics program.
Born on 25th June 1949, Mr. S. Sathyamurthy is an AMIE in Electronics and Telecom.
Engg (1976) and holds an ME first class [Distinction] in Communication Systems from
College of Engg., Guindy (1989), Chennai.
Who Can Attend
Two Days Workshop on
EMI/EMC Design SolutionsFundamentals of EMI-EMC | EMI Control Techniques |EMI/EMC Simulation
th th15 & 16 Feb 2013, @ Bangalore IndiaFor more details contact :
About the Workshop :
He is life member of SEMCE(I), ASCI and IEEE Member. He has published 80 papers
in national/ International Conferences and Journals. Recipient of NV Gadhadhar
Memorial Gold medal Award (2003) from IETE (India), for his contributions to mobile
Radio Communications and DRDO Performance Excellence Award, for his
contributions to Reliability Trials of MBT Arjun (2008) and SEMCE(I)Commendation
certificate (2008) .
He is the sole author of the books “Basics of EMC”,` Elements of Robotic
Systems' and co-author of the book “Optical Communication”. His areas of
interest are Antennas, EMP, Millimetric waves and Fibre optics Technology.
He did his PhD(2011) from Sathyabama University , in Mutual interference
effects of multi radio set mobile communication system in a Combat Vehicle.
About DHIO RESEARCH AND ENGINEERING PRIVATE LIMITED
DHIO Research & Engineering Pvt Ltd is a Collaborative Engineering
Services and R&D Company based in Bangalore India.
DHIO has an experience and pool of experts in Advanced Computer Aided
Engineering Design, Analysis and Optimization knowledge. DHIO extends its
support to Auto, Aero, Power plant, Chemical Processing, Railways and
General Engineering Companies to achieve complex engineering needs in
product/process/ material design, redesign, engineering, reverse engineering,
analysis and optimization to save money, material and time.
DHIO partners with EMCOS, Georgia for EMI– EMC Simulation
Technology Support, Training and Sales.
DHIO has a experts with 35+ Years of experience in Design, analysis and
testing of Components, Systems for EMI-EMC Requirements and Standards.
EM Simulation Software
Computer modeling is a fast and inexpensive way to investigate and solve
EMC/EMI problems that occur in electrical/electronic systems. EMCoS
provides number of convenient EM simulation tools.
Harness Design and Analysis
Automotive cable harness is a complicated system consisting of huge
number of wires, representing electrical connections between ECUs. To
design and analyse complex harness systems we offer convenient computer
aided tools.
EMC-Consultation
We offer consultation services in the fields listed below. If you cannot find
exactly what you require please do not hesitate to contact us:
· CAD modeling of EMC problems
· EMI (Electromagnetic Interference from cables and devices)
· Immunity problems, especially related to extended conductor structures
· Crosstalk problems
· Filter problems
· ESD (Electrostatic Discharges) - System Level simulation
· Low frequency problems (H-field and E-field estimation)
· Adjustment of bench investigations on subsystems to large systems
Antenna-Consultation
We offer consultation services in the fields listed below. If you cannot find
exactly what you require please do not hesitate to contact us:
· Automotive glass antennas
· Optimized antenna placement based on EMC considerations
· Analysis and development of antennas for different applications
· Electromagnetic interactions of antennas and electronic components on
complicated structures (automobiles, ships, airplanes ...)
· Analysis of radiation and scattering characteristics of antennas mounted on
large structures
· Low frequency antennas
For More details, please visit www.dhio.in, www.emcos.com
Registration Details
Industry : Rs 4000.00 + Service Tax
R&D Institutions, Faculty : Rs. 3500+ Service Tax
Student : INR 1500.00+ Service Tax
Registration fee includes the working tea/coffee., Lunch and Study/Workshop
Materials
Cash/DD/Cheque in name of “DHIO RESEARCH AND ENGINEERING
PVT LTD” Payable at Bangalore
Find the attached Registration Form,
For Registration Details Contact
Mrs UMA B
Head – Operations
DHIO Research & Engineering Pvt Ltd.,
# 28 (Old No 619/1), 2nd Floor, 36th Cross,
2nd Block, Rajajinagar, Next to Srinivasa Kalyana Mantapa,
Bangalore-560010 India
Ph/Fax: +91 80 49539628 Cell No : +91 9591994642
Email : [email protected] Web : www.dhio.in