embassy systems - tthermttherm.com/tthermstore/embassyind_radiantcatalog.pdfflow indicators,...

27
Embassy Systems 2005 Radiant Heating Product Catalog A Subsidiary of P & F Industries, Inc.

Upload: others

Post on 25-Jan-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

  • Emba

    ssy Sy

    stems

    2005 Radiant Heating Product Catalog

    A Subsidiary of P & F Industries, Inc.

  • TABLE OF CONTENTS

    Liquipex Cross-Linked Polyethylene (Pex) Tubing.......................................2

    Hydropex......................................................................................................3

    Modular Manifold System - Components ..................................................4

    Modular Manifold System - Accessories ....................................................5

    Modular Manifold System - Replacement Parts ........................................6

    Brass Manifolds ...........................................................................................7

    Copper Manifolds ........................................................................................8

    Liquipex Fittings and Adapters ....................................................................9

    Aluminum Snap Plates...............................................................................10

    Therma Board ............................................................................................11

    Liquipex Fasteners & Supports -

    Tube Support Channels, Bend Supports, Conduit Ells & Pex Clips ...12

    Clip Gun Tool & Clips, Clic-Holders Tube Talons & Tube Caps ..........13

    Ties, Pneumatic Stapler, Wood Tacker & Foamtacker ........................14

    Mixing Valves .............................................................................................15

    Controls - Set Point Control, Mixing Valve Reset & Accessories..............16

    Controls - Circulator Relays, Injection & Zone Valve Conrtoller ................17

    Controls - Thermostats ..............................................................................18

    Controls - Snow Melt .................................................................................19

    Circulators ..................................................................................................20

    Installation Accessories .............................................................................21

    Design Tools...............................................................................................22

    Warranty .....................................................................................................23

  • LIQUIPEX CROSS-LINKED POLYETHYLENE (Pex) TUBING WITH 02 BARRIER

    Embassy's LIQUIPEX cross-linked polyethylene (Pex) tubing with DIN 4726 compliant oxygen diffusion barrier is ratedfor continuous use at 100 psi and 180˚ F. LIQUIPEX is manufactured to ASTM F876/877 standards, meets NSF14 forradiant floor heating, and is ICC-ES approved (ESR-1029).

    LIQUIPEX

    Part Number Description

    11100301 3/8" nominal I.D., 250' coil 11100302 3/8" nominal I.D., 500' coil11100304 3/8" nominal I.D., 1000' coil

    11100403 1/2" nominal I.D., 300' coil11100406 1/2" nominal I.D., 600' coil11100404 1/2" nominal I.D., 1000' coil

    11100501 5/8" nominal I.D., 250' coil11100502 5/8" nominal I.D., 500' coil11100504 5/8" nominal I.D., 1000' coil

    11100601 3/4" nominal I.D., 250' coil11100602 3/4" nominal I.D., 500' coil

    EMBASSY SYSTEMS2

  • HYDROPEXWITHOUT 02 BARRIER

    Embassy Industries’ HydropexTM cross-linked polyethylene (PEX) tubing, without oxygen barrier, is rated for continuous use at 100 psi at 180°F. HydropexTM is manufactured to ASTM F876/F877 standards and is NSF 61 andNSF 14 certified. Typical applications include hot and cold potable water distribution systems and snowmelt heating.When using HydropexTM in radiant heating applications, corrosion inhibitors and/or heat exchangers and non-ferrouscomponents must be used.

    HYDROPEX

    Part Number Description

    11700306 3/8" nominal I.D. X 20’11700301 3/8" nominal I.D. X 100’11700302 3/8" nominal I.D. X 250’11700303 3/8" nominal I.D. X 500’11700304 3/8" nominal I.D. X 1000’

    11700406 1/2" nominal I.D. X 20’11700401 1/2" nominal I.D. X 100’11700402 1/2" nominal I.D. X 250’11700403 1/2" nominal I.D. X 500’11700404 1/2" nominal I.D. X 1000’

    11700606 3/4” nominal I.D. X 20’11700601 3/4" nominal I.D. X 100’11700602 3/4" nominal I.D. X 250’11700603 3/4" nominal I.D. X 500’11700604 3/4" nominal I.D. X 1000’

    3RADIANT HEATING PRODUCTS - 2005

  • 4 EMBASSY SYSTEMS

    MODULAR MANIFOLD SYSTEM

    Embassy's feature-packed modular manifold system offers great quality and flexibility. It's modular design allows forboth easy stocking and application. Flow indicators, thermometers, air vents, built-in purge valves and positive shut-off valves simplify installation and system set-up.

    MODULAR MANIFOLD COMPONENTS

    Part Number Description

    11200001 Bracket & End Block Kit

    Basic manifold kit including mounting brackets, supplyblocks with 1-1/4" NPT tappings, air vents, purge valves and end covers. Supplied with silicone grease and assembly instructions.

    11210000 Actuator Supply Block

    Red supply block with manual positive shut-off valve. May be used as a standard manual block or used with Manifold Valve Actuators for loop-by-loop zone control.

    11220000 Manual Supply Block

    Red supply block with manual positive shut-off valve.Will NOT accept Manifold Valve Actuators.

    11230000 Indicator Return Block

    Blue return block with manual shut-off/balancing valve.Includes integral flow indicator for easy systembalancing and diagnostics.

  • 5RADIANT HEATING PRODUCTS - 2005

    MODULAR MANIFOLD SYSTEM

    MANIFOLD ACCESSORIES

    Part Number Description

    11520001 Manifold Valve Actuator, 4-wire with end switch

    11270300 3/8" Pex to Manifold Fitting11270400 1/2" Pex to Manifold Fitting11270500 5/8" Pex to Manifold Fitting11270600 3/4" Pex to Manifold Fitting

    11480001 Hollow-shaft Nut Driver

    For assembly of manifold, fits 8mm nuts on threaded rod.

    11240000 8mm Threaded Rod

    8mm by 1 meter long threaded rod for manifold assembly.Each rod includes 2 nuts. Four rods required for up to 6-loop manifolds, eight rods for 7 to 10 loop manifolds.

    11030605 Nuts, 8mm (pack of 10)

    11481000 Lubrication Kit

    Silicone grease for manifold block o-rings, 10 packs per kit.

  • 6 EMBASSY SYSTEMS

    MODULAR MANIFOLD SYSTEM

    MANIFOLD REPLACEMENT PARTS

    Part Number Description

    11240503 Air Vent & Cap Assembly

    11240501 Supply Block Insert11240502 Return Block Insert

    11240506 Manifold Inlet and End Block, Plastic11240507 Manifold Inlet and End Block, Brass11240605 Bracket Only for Manifold11240607 Vent Block for Plastic End Block Kit11240608 Vent Block for Brass End Block Kit

    11240606 Supply/Return Block Thermometer11240504 Hose Bib Adapter11240505 Manifold Cap11240601 O-ring for Supply & Return Vent Blocks 11240602 O-ring for End Block Group11240603 O-ring for Pex to Manifold Fitting

  • BRASS MANIFOLDS

    Cast brass manifolds with built-in flow indicators, balancing valves and air vents.

    MANIFOLD ACCESSORIES

    Part Number Description

    11250002 Supply Manifold, 2 Branch11250003 Supply Manifold, 3 Branch11250004 Supply Manifold, 4 Branch11250005 Supply Manifold, 5 Branch11250006 Supply Manifold, 6 Branch

    Equipped with built-in valves for optional valve actuators,adjustable plastic cap, end piece with air vent, fill/drainvalve and hose connector, one bracket, and 1” sweatadapter.

    11251002 Return Manifold, 2 Branch11251003 Return Manifold, 3 Branch11251004 Return Manifold, 4 Branch11251005 Return Manifold, 5 Branch11251006 Return Manifold, 6 Branch

    Equipped with flow indicators, balancing valves, end piecewith air vent, fill/drain valve and hose connector, onebracket, and 1” sweat adapter.

    11520002 Valve Actuator, 24 V AC with end switch11521002 Adapter for valve actuator

    11253002 Manifold Parts, Double nipple with lock nut (2/bag)11252001 Manifold Parts, White plastic cap for supply header11252002 Manifold Parts, Sweat adapter11252003 Manifold Parts, Wall bracket11252004 Manifold Parts, End cap with vent & fill/drain11253001 Manifold Parts, Flow meter w/ locking cap11253003 Manifold Parts, Hose bib w/ retaining nut11254004 Manifold Parts, Manifold cap11254005 Manifold Parts, O-ring for sweat adapter11254006 Manifold Parts, O-ring for end cap11255001 Manifold Parts, Manifold transition to 1-1/4” Cu11255002 Manifold Parts, Manifold transition to 1” NPT (2/bag)

    7RADIANT HEATING PRODUCTS - 2005

  • 8 EMBASSY SYSTEMS

    COPPER MANIFOLDS

    Basic copper tube manifolds made of heavy-duty type-L copper. 1” trunks with 1/2” branches. NSF-61 approved.

    COPPER MANIFOLDS

    Part Number Description

    11981020 Copper Manifolds, 2 Branch1” trunk with 1/2” branches. Use part number 11300401 (pg 9) to connect Liquipex to branches.*

    11981030 Copper Manifolds, 3 Branch1” trunk with 1/2” branches. Use part number 11300401 (pg 9) to connect liquipex to branches.*

    11981040 Copper Manifolds, 4 Branch1” trunk with 1/2” branches. Use part number 11300401 (pg 9) to connect liquipex to branches.*

    *A pex to manifold fitting is also required. The pex to manifold fitting is based upon the size of the pex used.

  • LIQUIPEX FITTINGS & ADAPTERS

    Embassy's fittings and adapters are machined from solid brass stock. They are used for connecting Liquipex orHydropex tubing to any conventional pipe, including copper, or any pipe and/or fitting with standard female pipethreads. They are ideal for the connection of Liquipex or Hydropex tubing to field fabricated manifolds. Please notethat all fittings must be used in conjunction with a Pex to Manifold Fitting (Page 5).

    COUPLINGS AND PIPE ADAPTERS

    Part Number Description

    11290300 Pex to Pex Union**Two Pex to Manifold Fittings required. The Pex to Manifold fittings are based upon Pex size used.

    11300400 1/2" Copper (street) to Pex11300401 1/2" Copper to Pex11300600 3/4" Copper (street) to Pex11300601 3/4" Copper to Pex11300800 1" Copper (street) to Pex11300801 1" Copper to Pex

    11300700 3/4" Male NPT to Pex11300712 1/2" Male NPT to Pex

    12147377 3/4" Brass sweat to Pex Adapter with 1/8” tapping for air vent

    12147378 Air vent 1/8”

    9RADIANT HEATING PRODUCTS - 2005

  • 10 EMBASSY SYSTEMS

    ALUMINUM SNAP PLATES

    Embassy's aluminum Snap Plates provide improved heat transfer for dry application radiant systems. The ExtrudedSnap Plate is a heavy (.062" thick) heat transfer plate with a downward facing channel to accept 3/8" Liquipex. Itoffers unparalleled heat transfer efficiency and quiet operation for under-sub-floor type applications. Embassy'sstamped-type Snap Plates include the double-groove version and the standard single-groove version.

    ALUMINUM SNAP PLATES

    Part Number Description

    11420000 Extruded Snap Plate for 3/8" Pex(3.75" wide by 48" long)

    11420003 Snap Plate for 3/8" Pex(6" wide by 24" long)

    11420004 Snap Plate for 1/2" Pex(5.8" wide by 24" long)

    11420005 Snap Plate for 5/8" Pex(5.5" wide by 24" long)

    11420007 Double-groove Snap Plate for 3/8" Pex (14" wide by 24" long)

    11420006 Double-groove Snap Plate for 1/2"Pex (14" wide by 24" long)

  • COMFORT TRACK

    Comfort Track is a radiant flooring system that is composed of medium density composite wood, and is covered inan aluminum adhesive. The aluminum accelerates the heat transfer from the tubing to the flooring. The boards canaccept any 3/8” PEX tubing that is manufactured to ASTM F876/877.

    COMFORT TRACK

    Part Number Description

    11643022 Straight Section(16" wide by 48" long)

    11643023 Combo End(16" wide by 48" long)

    11643025 Utility End(16" wide by 48" long)

    ALL BOARDS ARE 5/8” THICK

    11RADIANT HEATING PRODUCTS - 2005

  • 12 EMBASSY SYSTEMS

    LIQUIPEX FASTENERS & SUPPORTS

    FASTENERS, SUPPORTS & ACCESSORIES

    Part Number Description

    11420900 Universal Tube Support Channel for 3/8”, 1/2”, 5/8”, & 3/4” Pex(1 meter long). Features interlocking ends for ease of installation.

    11410400 Bend Support for 3/8" & 1/2" Pex11410500 Bend Support for 5/8" Pex11410600 Bend Support for 3/4" Pex

    11485012 PVC Conduit Ell for 1/2" & 3/8" Pex11485058 PVC Conduit Ell for 5/8" Pex11485034 PVC Conduit Ell for 3/4" Pex

    11486002 Pex Clip for 1/2", 5/8" & 3/4" Pex (50/bag)Secures Pex to wire mesh.

    11486001 Pex Clip for 1/2", 5/8" & 3/4" Pex (50/bag)Screw type for foam board insulation.

  • 13RADIANT HEATING PRODUCTS - 2005

    LIQUIPEX FASTENERS & SUPPORTS

    FASTENERS, SUPPORTS & ACCESSORIES

    Part Number Description

    11470000 Clip Gun fastening ToolIdeal for staple-up applications or for fastening Liquipextubing to any wood surface.

    11471001 Clips for 3/8" Pex (1/2" O.D.)11471002 Clips for 1/2" Pex (5/8" O.D.)11471003 Clips for 5/8" Pex (3/4" O.D.)11471004 Clips for 3/4" Pex (7/8" O.D.)

    11431001 Clic-Holder for 3/8" Pex (100/Bag)11431002 Clic-Holder for 1/2" Pex (100/Bag)

    Clic-Holders are ideal for staple-up application or for fastening Liquipex Tubing to any surface.(Mounting hardware not included)

    11484001 Tube Talons for 1/2" & 3/8" Pex (100/Bag)11484002 Tube Talons for 5/8" & 3/4" Pex (100/Bag)

    11432001 Touch Down Clamp for all Pex Sizes

  • 14 EMBASSY SYSTEMS

    LIQUIPEX FASTENERS & SUPPORTS

    FASTENERS, SUPPORTS & ACCESSORIES

    Part Number Description

    11440000 7" Nylon Cable Ties (1000/bag)For securing Liquipex tubing to wire mesh or re-bar.

    11430001 Wire Ties (1,000/Roll)For securing Liquipex to wire mesh or re-bar.

    11482000 Hand Tool for Wire Ties11482001 Automatic Tool for Wire Ties

    Operates like a "Yankee Screwdriver".

    11490001 Pneumatic Power Stapler/Walking Stick11491000 1-1/4" staples (10,000/pack)

    11493000 Woodtacker Staple GunIdeal for affixing Liquipex Tubing to wood surfaces.

    11493103 Woodtacker Staples (500/carton)Fits 3/8”, 1/2”, 5/8” tubing.

    11493005 Foam Tacker Staple GunUsed to affix Liquipex Tubing to rigid foam board insulation.

    11493010 Foam Tacker Staples, Large (300/Carton)Fits 2” rigid insulation.

    11493015 Foam Tacker Staples, Small (300/Carton)Fits 1” rigid insulation.

  • 15RADIANT HEATING PRODUCTS - 2005

    MIXING VALVES

    3-WAY & 4-WAY MIXING VALVES

    Part Number Description

    11500807 3-way Thermostatic3/4" female NPT, CV = 2.2, 110 - 140˚F. range

    11500800 3-way Thermostatic1" compression, CV = 4.1, 110 - 140˚F. range

    11500885 3-way Thermostatic1" compression, CV = 3.9, 85 - 120˚F. range

    11500813 4-way Manual3/4" female NPT, CV = 4.7

    11500815 4-way Manual1" female NPT, CV = 9.3

    11500816 4-way Manual1" female NPT, CV = 14

    11500804 4-way Manual1-1/4" female NPT, CV = 21

    11500806 4-way Manual1-1/2" female NPT, CV = 35

    11500812 4-way Manual2" female NPT, CV = 50

  • 16 EMBASSY SYSTEMS

    CONTROLS

    DIGITAL SET POINT CONTROL, OUTDOOR RESET CONTROL &ACCESSORIES FOR MANUAL VALVES

    Part Number Description

    11552003 Digital Set-Point Control

    Heat-Timer Digi-Span, use for floor warming applications.Dry-contact output controls an actuator or circulator relay.Mounts on 4" square electrical box under cabinet or inutility room. Requires 24 VAC or 110VAC power input. Sensor included.

    11552008 Optional Mounting Kit for Digital Set-Pt. Control

    11551200 Outdoor Reset Control

    Heat-Timer Model 200 (sensors included).

    11551201 Optional 24-hour Clock11551202 Optional 7-day Clock

    11500805 Motor for Manual Mixing Valves

    24 volt, for valves up to 1-1/2".

    11550001 Transformer for Reset Control

    24 VAC (50 VA), plug into wall outlet. Internally fused.

  • CONTROLS

    CIRCULATOR RELAYS, ZONE VALVE CONTROLLERAND VARI-SPEED INJECTION RESET CONTROL

    Part Number Description

    11570503 3-zone Circulator Relay11570504 4-zone Circulator Relay11570506 6-zone Circulator Relay

    All circulator relays include LED indicator lights, priorityzone operation, data-port for optional plug-in cards and aport for connection to a Vari-Speed Injection Control.

    11580605 Priority Protect Card

    Plugs into Circulator Relay data-port, prevents heatingsystem lockout in the event of priority zone failure.

    11580705 Variable-Speed Injection Control

    Taco Model PC705-1 provides outdoor reset operation bycontrolling an injection circulator. Use with circulatorrelays above.

    11551005 Zone Valve Controller

    5 zones with built in 24 VAC (75 VA) transformer anddry-contact end-switch. Use with manifold actuators orstandard zone valves.

    17RADIANT HEATING PRODUCTS - 2005

  • 18 EMBASSY SYSTEMS

    CONTROLS

    THERMOSTATS

    Part Number Description

    11540000 Wall Thermostat, RMT (bellows)

    24 VAC, equipped with a parallel anticipator designed for use with radiant floor heating systems.

    11540002 Wall Thermostat, Digital

    Single-stage, heat only with battery back-up, 1˚ or 2˚ Ffield-selectable differential.

    11540001 Wall Thermostat, Digital

    Danfoss Model HT, single-stage heating only.Non-programmable day-night settings, fuzzy-logic heatanticipation chip. Runs on 2 AA alkalinebatteries (included).

    11540003 Wall Thermostat

    A versatile control with integral air and floor surface temperature-sensing capabilities. It can be used to maintain minimum floor surface temperature in floor warming applications or limit maximum floor surface temperature in space heating applications. Dry contact output to control a circulator relay or manifold actuator (no isolation relay required). Requires 24 VAC power input.

  • CONTROLS

    SNOW MELT CONTROLS

    Part Number Description

    11552001 Snow Melt Switch

    ETI Snow Melt Switch is ideal for small systems. Turns system on when air temperature falls below 36˚ F. and precipitation begins. Dry contact output controls a zone valve or circulator relay. Entire unit mounts outdoors. Requires 24 VAC power input.

    11552002 RSM Control

    Heat-Timer Residential Snow Melt Control, ideal for all small to medium sized projects. Operates a motorized mixing valve enabling "idle" and "full output" modes by monitoring system temperature drop (delta T) through the snow melt area. Includes sensors for outside air temperature, system supply temperature and system return temperature. Must be used with a manual mixing valve motor and transformer (pages 15-16).

    11552004 Commercial Snow Melt Control

    Heat-Timer SMC is a comprehensive control system, well suited for large and/or "high priority" snow melt projects. Includes temperature and moisture sensors. Must be used in conjunction with motorized mixing valves (not included).

    19RADIANT HEATING PRODUCTS - 2005

  • 20 EMBASSY SYSTEMS

    CIRCULATORS & VARIABLE SPEED CIRCULATORS

    CIRCULATORS & VARIABLE SPEED CIRCULATOR

    Part Number Description

    11560017 Grundfos UPS15-42 3-speed Circulator with Built-in Flow Check

    11560011 Taco Model 0011 Circulator11560252 Flange Set, 1" NPT

    11560015 Grundfos Miximizer Variable Speed Injection Circulator

    Variable speed circulating pump incorporates an outdoor reset control and sensors. Use for precision water temperature control via injecction mixing with energy saving outdoor reset control.

  • INSTALLATION TOOLS

    TOOLS & ACCESSORIES

    Part Number Description

    11481001 Pex Tubing Cutter

    11492000 Pneumatic Palm Hammer

    A compact automatic hammer that makes the installation of Pex tubing into the channel of the Extruded Snap Plate fast and effortless.

    11492001 Replacement Head

    Medium plastic replacement head for palm hammer.

    11430300 Tube Cap for 3/8" Pex (100/Bag)11430400 Tube Cap for 1/2" Pex (100/Bag)11430500 Tube Cap for 5/8" Pex (100/Bag)11430600 Tube Cap for 3/4" Pex (100/Bag)

    Tube Caps provide a simple and effective means of securing the open end of Pex to prevent entry of dirt or debris.

    11481101 Bulk Tube Handler

    All steel construction, aids in unrolling coils ofLiquipex tubing.

    21RADIANT HEATING PRODUCTS - 2005

  • DESIGN TOOLS

    EMBASSY SOFTWARE

    The Radiant Advantage is a full-featured Windows®

    based application for heat loss calculations and for the designof Embassy Radiant Floor Heating Systems. Using The Radiant Advantage, authorized dealers and distributors canquickly prepare designs and quotations.

    This software offers unprecedented features such as ease of use, quick access to on-line help, and a parts list thatreflects the most current Embassy products and prices. Each design is saved as a Radiant Advantage project andcan be easily retrieved and revised. A parts list estimator determines quantities of most of the Embassy productsrequired by the user-defined project specifications. Moreover, reporting capabilities deliver hard copy presentationsof critical project information. In short, The Radiant Advantage provides all that is necessary for a complete andcomprehensive design assessment. In addition to The Radiant Advantage radiant design option, a baseboard toolhas been included for quick baseboard estimators, making this software a complete hydronic heating package.

    Part Number Description

    11080000 Radiant Advantage CD Version 5.0

    EMBASSY SYSTEMS22

  • 23RADIANT HEATING PRODUCTS - 2005

    EMBASSY SYSTEMSLIMITED WARRANTY

    Effective July 1, 1994

    For Embassy Systems’ Liquipex and Hydropex tubing and other componentssold by Embassy Industries, Inc. for use in Embassy’s radiant heating systems.

    Embassy Industries, Inc. ( Embassy ) warrants that the Liquipex and Hydropex tubing and other components sold foruse in their radiant heating systems shall be free from defects in material and workmanship and shall conform toEmbassy s written specifications. It is expressly understood that failure of any component as a result of the freezingof water within any pipes shall not constitute a defect in material or workmanship, and shall not be covered by this war-ranty. This limited warranty shall be valid for a period of twenty-five (25) years after the date of sale by Embassy forLiquipex and Hydropex tubing, a period of eighteen (18) months after such date of sale for all other components soldby Embassy for use in Embassy s radiant heating systems, subject to the following provisions.

    Notice of any claim under this limited warranty must be received by Embassy within thirty (30) days after that claimarises. After receipt of such notice, Embassy shall inspect all items which are the subject of the claim in order to ascer-tain responsibility and to recommend a remedial course of action.

    Embassy s sole obligation hereunder shall be, at its sole option, to issue credit for, or repair or replace, any item or partthereof, which is proved to be other than as warranted. In connection with any claim, an allowance for transportation,labor, part replacements or repairs or any other work, shall be made only if such charges are authorized in writing inadvance by Embassy. Performance of any repairs by any party without Embassy s prior written approval shall renderthis warranty invalid.

    This limited warranty applies and shall remain valid only if items subject to this limited warranty (a) are selected,designed and installed in accordance with the specification, design guidelines and installation manuals furnished byEmbassy, (b) are installed in a workmanlike manner, and in accordance with applicable code requirements, (c) remainin their originally installed location, (d) are connected to, and operated with, the proper water and electrical supplies,(e) are not misused or abused, and (f) show no evidence of mishandling, tampering, neglect, accidental damage, fail-ure due to structural damage, modification or repair without the written approval of Embassy, or damage caused byanyone other than Embassy personnel. It is expressly understood that authorized Embassy sales representativeshave no express or implied authority to bind Embassy to any agreement or warranty of any kind without the expresswritten consent of Embassy.

    THE ABOVE LIMITED WARRANTY IS THE FULL EXTENT OF ALL WARRANTIES PROVIDED BY EMBASSYINDUSTRIES, INC. WITH RESPECT TO THE COMPONENTS OF ITS RADIANT HEATING SYSTEMS. EMBASSYINDUSTRIES, INC. DISCLAIMS ANY WARRANTY NOT EXPRESSLY STATED HEREIN, INCLUDING BUT NOT LIM-ITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ANDANY STATUTORY OR IMPLIED WARRANTY OF HABITABILITY. EMBASSY INDUSTRIES, INC. FURTHER DIS-CLAIMS ANY RESPONSIBILITY FOR LOSSES, EXPENSES, INCONVENIENCES, OR ANY SPECIAL, INDIRECT,SECONDARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF ANYITEMS SUBJECT TO ANY CLAIM HEREUNDER, REGARDLESS OF WHETHER SUCH CLAIM IS STATED IN CON-TRACT, TORT OR STRICT PRODUCT LIABILITY.

    RETURN AUTHORIZATION POLICY

    Returns will not be accepted without a valid Materials Return Authorization (MRA) number issued by EmbassyIndustries, Inc. Issuance of a MRA does not constitute an obligation on Embassy s part to issue either a full or partialcredit. The amount of the credit, if any, will be determined by Embassy after inspection of the returned materials, andmay be subject to a 15% handling charge. Claims for shortages must be presented within 10 days after receipt ofshipment. Claims for loss or damage must be filed directly with the carrier.

    Embassy Industries, Inc. 300 Smith Street Farmingdale, NY 11735 (631) 694-1800 Fax (631) 694-1832

  • 24 EMBASSY SYSTEMS

  • ABOUTEMBASSYEmbassy Industries, Inc., a leading

    manufacturer of hydronic heating

    products for more than 50 years, designs

    and manufactures a full line of hydronic

    baseboard products, radiant floor

    heating systems, potable water products,

    and energy efficient compact space

    heaters.

    300 Smith Street Farmingdale, NY 11735 (631) 694-1800 Fax (631) 694-1832

    ABOUTEMBASSYEmbassy Industries, Inc., a leading

    manufacturer of hydronic heating

    products for more than 50 years, designs

    and manufactures a full line of hydronic

    baseboard products, radiant floor

    heating systems, potable water products,

    and energy efficient compact space

    heaters.

  • Embassy Industries, Inc., 300 Smith Street, Farmingdale, NY 11735(631) 694-1800, Fax: (631) 694-1832, www.embassyind.com

    A Subsidiary of P & F Industries, Inc.