element parts and consumables

Analyze • Detect • Measure • Control™

ELEMENT 2/ELEMENT XRConsumables and Parts Catalog

Revision B - 121 4170

© 2007 Thermo Fisher Scientific. All rights reserved.

“Viton” is a registered trademark of DuPont Dow Elastomers.

All other trademarks are the property of Thermo Fisher Scientific and its subsidiaries.

Technical information contained in this publication is for reference purposes only and is subject to change without notice. Every effort has been made to supply complete and accurate information; however, Thermo Fisher Scientific assumes no responsibility and will not be liable for any errors, omissions, damage, or loss that might result from any use of this manual or the information contained therein (even if this information is properly followed and problems still arise).This publication is not part of the Agreement of Sale between Thermo Fisher Scientific and the purchaser of an Thermo Scientifc system. In the event of any conflict between the provisions of this document and those contained in Thermo Fisher Scientific’s Terms and Conditions, the provisions of the Terms and Conditions shall govern.System Configurations and Specifications supersede all previous information and are subject to change without notice.

Printing History: Revision B printed in January 2007.

ELEMENT 2/XR Consumables and Parts Catalog

Thermo Fisher Scientific provides a full range of competitively prices consumables for both types of instruments. These consumables and parts are available through your Local Office and include consumables for the ion source, cones and pump accessories.The key consumables and spare part items are listed below for your reference.

To learn more about this and other products and comprehensive service offerings, visit our Web site at www.Thermo.com/element2.

ELEMENT 2/ ELEMENT XR

With the experience of more than 350 installed ELEMENTs, Thermo Fisher Scientific has rigorously optimized the ELEMENT 2 for ease-of-use, stability and productivity.

Refined ion optics deliver high transmission at high resolution. The Thermo Scientific ELEMENT 2 is the high resolution ICP-MS for routine productivity in your laboratory.

Based on the proved design of the ELEMENT 2, another unique detection system in ICP-MS, combining a dual mode SEM with a Faraday detector, is the ELEMENT XR HR-ICP-MS.

Thermo Fisher Scientific 1


Consumables Kit # 112 5671

Part # Description Qty

111 0720 Nebulizer ICP (1 mL/min) quartz 1

112 2550 Nebulizer EzyFit IN for 111 0720 1

112 2800 Injector quartz Ø 1.75 1

109 1250 Torch 1

113 6500 Bonnet/ glass ring quartz CD2 1

112 6640 Shield torch / guard electrodeclip for securing torch

1

113 9230 Load coil complete (Seren) 1

106 6310 Peristaltic pump tube mediprene(violett-black)

12

113 1270 Peristaltic pump double tube (orange-green)

6

104 2940 peristaltic pump tube PVC (black) 12104 2620 Sealing sampler cone

graphite gasket for sampler cone50

104 4530 Sampler cone nickel 2

106 7600 Skimmer cone nickel 2



Spare Parts Kit # 112 5663

Part # Description Qty

115 2700* SEM ICP2-V2 PLUG IN 1

104 2620 Sealing sampler conegraphite gasket for sampler cone

50

106 9861 Sealing kit magnet Kapton foil sealing kit for magnet

1

106 9880 Sealing kit entrance slitKapton foil and Teflon sealing kit for entrance slit

4

106 9890 Sealing kit analyzerKapton foil and Teflon sealing kit for analyzer

1

106 9870 Sealing kit ESA Kapton foil and Teflon sealing kit for ESA

1

104 2560 Sealing source valve Viton® sealing for cylinder source valve

1

055 4570 O-Ring 34.59 X 2.62 Viton® o-ring for interface

4

017 2350 Lubricant reservoirs TPH060/62/64/71reservoirs for turbo pumps B to D

3

105 0160 Lubricant reservoirs 260/262reservoirs for turbo pump A

1

104 4530 Sampler cone ICP nickel 1

106 7600 Skimmer cone ICP nickel 1

112 2800 Injector quartz ICP Ø 1.75 1

109 4301 Oil for backing pump DUO 5 - type P3 - 3 ltr

113 6532** Oil for pump UNO 30M - type F4 - 1.2 ltr

*instruments supplied before May 2004 may still use the SEM type 111 4710**instruments equipped with the interface pump DUO 030B must be refilled usingeither T100 oil (Part # 113 6530) or F5 oil (organic matrix use, Part # 113 6531)



Accessories - Cones

Part # Description

104 4530 Sampler cone nickel

106 7501 Sampler cone platinum

106 7500 Sampler cone platinum, boron-freefor semiconductor related applications

106 7600 Skimmer cone nickel

114 2160 Skimmer cone nickel X-version

104 7461 Skimmer cone platinum

104 7460 Skimmer cone platinum, boron-freefor semiconductor related applications

114 2151 Skimmer cone platinum X-version

114 2150

118 4050 Sampler cone aluminum

118 4060 Skimmer cone aluminum

Accessories - Autosampler

Part # Description

116 9950

106 9420

072 2530

Accessories - Nebulizer

Part # Description

111 4021

106 9400

106 9410

U-5000 AT + ultrasonic nebulizer

U-6000 AT + ultrasonic nebulizer with membrane desolvation

Aridus nebulizer with membrane desolvation

Skimmer cone platinum X-version , boron-free for semiconductor related applications

ASX - 260 micro autosampler with sample tray for24 samples vials (5mL)

ASX - 520 autosampler with 4 rack sample tray for240 samples vials (14mL)

ASX - 100 micro autosampler with sample tray for24 samples vials (5mL)



Accessories - Sample Introduction

Part # Description

117 0800 Plug-in slit tongue 1

112 7110 Click in torch assemblyincludes injector (not depicted)

1

108 3911

108 3921

113 5450

111 0720 Nebulizer ICP 1 mL/min quartz

116 1870

115 7470 Quartz double pass spray chamber for Peltier Device

112 0900 Quartz dual spray chamber water cooled spray chamber

106 3410

114 2200 O-rings for spray chamber4 o-rings for quartz spray chamber end cap

116 1860 Quartz cyclonic spray chamber (Twinnabar)

115 7350 PFA spray chamber to be used for Peltier cooling

112 7100 End cap for PFA spray chambers incl. connectors and tubings

112 2800 Quartz injector standard torch (1.75 mm i.d.)113 0680 Quartz injector standard torch (1.0 mm i.d. for org.matrix)109 1260 Sapphire injector for standard torch

109 2000 Pt injector 1.8 mm i.d.

118 4190 Pt injector 1.0 mm i.d.

115 9440

116 1910 Injector 2.2 mm (for matrix kit)

115 2810 Laser adaptation kitincl. add. He mass flow controller, Al cones

PFA Microconcentric nebulizer (100 µL/min)for acid-resistant inlet system and standard inlet system

PFA Microconcentric nebulizer (50 µL/min)

Micro Mist nebulizer 200 µL/minincludes EzyFit connector kit with tubing

PFA Microconcentric nebulizer (20 µL/min)

End cap for spray chamber end cap for quartz spray chambers (o-rings nr. 114 2200 also required)

Matrix Kit ELEMENT2 for matrix samplesIncl. Micro Mist nebulizer 116 1870, Cyclonic spray chamber 116 1860 and Injector 2.2 mm 1161910



Accessories - Miscellaneous

Part # Description

112 9600

113 0600

115 6420 Peltier cooling for spray chamber incl. spray chamber (upgrade)

207 5480

106 7532

116 2160

116 2170112 7121

106 7531

109 9601 Tune solution

Water recirculator for basic instrument (50 Hz)Merlin M75-D

Organic matrix accessory includes mass flow controller, dual spray chamber, sampler cone (platinum), skimmer cone (platinum), nebulizer, tubings, connector, injector

Stable introduction systemincludes glass spray chamber and 50 µl/min low-flow nebulizer (6mm)

Water recirculator for basic instrument (60 Hz)Merlin M75-PD2

Power connection Kit Canada

Organic matrix accessory including mass flow controller(oxygen) and special pumping system w. synthetic oilAcid-resistant sample introduction system incl. mass flow controller (Ar) + special pumping system w. synthetic oil

Acid-resistant sample introduction system



Factory Installed Options

Part # Description

116 3900 Peltier cooling quartz for spray chamber incl. spray chamber

117 8220 Peltier cooling PFA for spray chamber incl. spray chamber

108 3080

112 3900

112 3910

114 4700 Mass flow controller for He (2 NL/min)

115 2820 Slit control by 8 bar N2 or compressed air

115 5940 Abundance sensitivity kit

115 9340

116 1580 Glove Box Adaptation to ELEMENT2 ICP-MS system

HPLC Connection kit incl. nebulizer for standard and low flow rate HPLC

µ-Sampler, incl. 10 port sample valve,for the measurement of low volume samples + online sample preparationMass flow controller for addition of make up-gas (argon), 1 NL/min

Mass flow controller for addition of make up-gas (oxygen), 1 NL/min


Thermo Electron Corporation81 Wyman StreetP.O. Box 9046Waltham, Massachusetts 02454-9046United States

www.thermo.com

Analyze • Detect • Measure • Control™

element parts and consumables

Documents