elecworks sors
TRANSCRIPT
SCHEDULE OF RATES ELECTRICAL WORKS AND MAINTENANCE OF
LIGHTING TO CARPARKS AND AMENITIES
C O N T E N T S
SECTION DESCRIPTION SOR PAGE
GENERAL PREAMBLE GP 1 - GP 2
A LIGHTING AND FAN POINT 1 - 3
B RISING MAIN/SUBMAIN/CIRCUIT WIRING AND CABLE 3 - 6
C CABLE GLAND & LUG 7 – 8
D CONDUIT, TRUNKING AND CABLE TRAY 8 – 11
E SWITCH, SOCKET OUTLET AND CONSUMER UNIT 11 – 13
F CONNECTOR, CUT-OUT, FUSE, TAP-OFF UNIT AND CIRCUIT BREAKER
13 – 17
G SWITCHBOARD, DISTRIBUTION BOARD AND SWITCHROOM ACCESSORIES
17 – 20
H INDOOR LUMINAIRE/LIGHT FITTING 20 – 50
I FAN 51 – 52
J LAMP, BULB, TUBE AND BALLAST 52 – 58
K LANTERNS 59 – 94
L LIGHTING COLUMN 94 – 100
M BOLLARD LIGHTING 100 – 105
N FLOODLIGHT/SPOTLIGHT/STEPLIGHT/BURIED LIGHT 106 – 117
P WEATHERPROOF BOX AND METAL ENCLOSURE 117 – 118
Q LIGHTNING PROTECTION SYSTEM 118 – 120
R LABOUR ONLY ITEM 120 – 124
S MISCELLANEOUS 124 – 125
T EXCAVATION AND TRENCHING 126 – 127
U DAYWORK 127 – 128
V OTHERS 129 - 130
W NEW LED LUMINAIRES 131
KMC/may/Elect-Preamble (FY12).doc (1) (12-01-2012) (CD 2012 Edition)
GP 1
SCHEDULE OF RATES
ELECTRICAL WORKS AND MAINTENANCE
OF LIGHTING TO CARPARKS AND AMENITIES
GENERAL PREAMBLES 1. The clauses in the General Preambles shall apply to all work items contained in the
Standard Schedule of Rates. 2. All rates include the allowance for complying with the General Preambles and
Specifications. 3. All rates contained in the Standard Schedule of Rates are exclusive of any Goods and
Service Tax. Any such Goods and Service Tax shall be borne by the Town Council as and when the same becomes due and payable.
4. All works, materials and goods described in this Schedule of Rates shall be of the
respective kinds described in the Contract and shall conform to the Specifications, Public Utilities Board, Energy Market Authority and other relevant Statutory Requirements and to be approved by the Superintending Officer.
5. The description given for each item shall unless otherwise stated, be held to include the use
of materials, labour, transport, equipment, tools, mobile lifting work platform, boom lift, hacking, supply of fuel and all idle time, conveyance, delivery, unloading, storing, hoisting, stools/ladders, all labour for setting, fitting, fixing in position, connection, all cutting and waste, return of packings, establishment charges, overheads, profit and all forms of claim for loss and expenses, labour for preparing surface to receive work, dismantling, protecting materials and work, making good all affected works and disposal of fittings including checking, tracing and clearing of fault (if any) before installation and testing after installation.
6. All rates in the Schedule (only applicable for street/garden lights) shall include boomlift, fuel
and driver where mean of access can be used. If mean of access cannot be used, any height above 6 metres shall be paid according to Clause 7 of the General Preambles.
7. No scaffold (other than a tower scaffold and trestle scaffold) exceeding 4 metres shall be
erected, installed, re-positioned, altered or dismantled except by an approved Scaffold Contractor. An approved Scaffold Contractor shall engage a qualified Scaffolding Supervisor to ensure that the scaffold is erected, installed, re-positioned, altered or dismantled in accordance with the Regulations. The 4 metres height is defined as the distance between the ground level where scaffold rests and the level of the highest working platform. The Schedule of Rates have taken into consideration of the scaffolding cost for height not exceeding 4 metres. The Contractor shall be paid separately for the scaffolding if its height exceeds 4 metres.
8. All rates in the Schedule shall be applicable for new and replacement works unless
otherwise stated. The rate for each item for the installation/fixing of parts/fittings shall unless otherwise stated, deemed to include all staples, clips, screws bolts, PVC connectors, rawl plug ramset brackets and other fixing accessories necessary for the satisfactory completion of the installation works.
8. Unless otherwise stated, all works shall be measured nett as fixed in its place. 9. If there is any disagreement between the Town Council and the Term Contractor on any of
the items, the Town Council’s assessment shall be taken as final. 10. The term "as specified" means as specified in all Specifications, Works Order and/or
drawings.
ID: KMC/iy/Elect-Preamble (FY11).doc (2) (19.10.10) (May/147-3)
GP 2
SCHEDULE OF RATES
ELECTRICAL WORKS AND MAINTENANCE
OF LIGHTING TO CARPARKS AND AMENITIES
GENERAL PREAMBLES 11. The following abbreviations are used for the units :- m - Linear metre m² - Square metre m³ - Cubic metre no. - Number pt - Point set - Complete set job - Per job pole - Per lighting column test - Per test tube - Per tube hr - Per Hour box - Per box 12. Where brand, trade names or catalogue numbers are given in the description, they are
solely intended for fixing the rates of the items. The products and materials to be used in the Contract shall be governed by the specifications, drawings, other documents forming the contract and/or subject to the approval of the Superintending Officer.
13. Daywork’s Schedule of Rates for LABOUR and PLANTS (Items U001 to U010) is inclusive
of 15% Establishment Charges and Profit. The contract percentages adjustment shall also apply.
14. For computation of ‘STAR’ rate using Daywork’s Schedule of Rates, the contract
percentages adjustment shall NOT apply to the ‘STAR’ rates computation. 15. In the case of claim under dayworks, the Contractor shall keep proper records of the
names, occupations and working hours of all workmen employed for such work and the quantities and descriptions of all materials and plant employed. Such records, receipts or vouchers must be verified by the Superintending Officer's Representative before payment can be effected. Provided always if the Superintending Officer's Representative shall consider that for any reason the keeping of such records, receipts and vouchers by the Contractor as required was impracticable, he shall nevertheless be entitled to authorise payment for such work either as daywork (on being satisfied as to the time employed and plant and materials used on such work) or at such value thereof as he shall consider fair and reasonable.
ID: KMC/iy/Elect-Preamble (FY11).doc (3) (19.10.10) (May/147-3)
SOR Page 1
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($)
A. LIGHTING AND FAN POINT
LIGHTING/FAN POINT'S WIRING IN PVC
TRUNKING
* Surface wiring of 2.5 mm2 PVC sheathed
cables and 2.5mm2 PVC earth cable in
PVC trunking including surface mounted
white plate switch with PVC mounting box
but excluding batten lamp-holder, ceiling
rose, fitting, fan regulator and
fan *(001 007)
A 001 NA One lighting or fan point controlled by a No. 18.35 E A 1
1-gang switch (trunking run not exceeding
8m)
A 002 NA One lighting or fan point controlled by a No. 25.35 E A 2
1-gang switch (trunking run exceeding 8m
but not exceeding 12m)
A 003 NA Two lighting or fan points controlled by a No. 36.50 E A 3
2-gang switch (trunking run not exceeding
12m)
A 004 NA Three lighting or fan points controlled by No. 58.65 E A 4
a 3-gang switch (trunking run not
exceeding 18m)
A 005 NA Each additional lighting or fan point in No. 11.20 E A 5
one loop switch circuit to items A1 to
A4 (trunking run not exceeding 5m)
A 006 NA Each additional lighting or fan point in No. 22.30 E A 6
one looping circuit to items A1 to
A4 (trunking run exceeding 5m but not
exceeding 10m)
A 007 NA One lighting point or fan point controlled No. 31.80 E A 7
by a two 2-way switch (trunking run not
exceeding 12m)
LIGHT/FAN POINT'S WIRING IN METAL
CONDUIT
* Surface wiring of 2 x 2.5mm2 PVC
sheathed cables and 2.5mm2 PVC earth
cable in 20mm diameter galvanised
steel conduit including surface
mounted metal clad plate switch with
mounting box but excluding batten
lampholder, ceiling rose, fitting, fan
regulator and fan *(008 014)
A 008 NA One lighting or fan point controlled by a No. 43.90 E A 8
1-gang switch (conduit run not exceeding
8m)
A 009 NA One lighting or fan point controlled by a No. 57.50 E A 9
1-gang switch (conduit run exceeding 8m
but not exceeding 12m)
A 010 NA Two lighting or fan points controlled by a No. 64.60 E A 10
2-gang switch (conduit run not exceeding
12m)
EM's CODE
ID : KMC/iy/ElecWorks (FY2012).xls (1) (21.10.2011) (May/147-3)
SOR Page 2
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
A 011 NA Three lighting or fan points controlled No. 98.05 E A 11
by a 3-gang switch (conduit run not
exceeding 18m)
A 012 NA Each additional lighting point or fan No. 22.30 E A 12
point in one looping circuit to items
A8 to A11 (conduit run not exceeding 5m)
A 013 NA Each additional lighting or fan point No. 42.50 E A 13
in one looping circuit to items A8 to
A11 (conduit run exceeding 5m but not
exceeding 10m)
A 014 NA One lighting or fan point controlled by No. 71.45 E A 14
two 2-way switch (conduit run not
exceeding 12m)
LIGHTING/FAN POINTS WIRING IN PVC
CONDUIT
* Surface wiring of 2 x 2.5mm2 PVC
sheathed cables and 2.5mm2 PVC earth
cable in 20mm diameter PVC conduit
including surface mounted metal clad plate
switch with mounting box but excluding
batten lampholder,ceiling rose, fitting, fan
regulator and fan *(015 021)
A 015 NA One lighting or fan point controlled No. 25.40 E A 15
by a 1-gang switch (conduit run not
exceeding 8m)
A 016 NA One lighting or fan point controlled No. 32.70 E A 16
by a 1-gang switch (conduit run exceeding
8m but not exceeding 12m)
A 017 NA Two lighting or fan points controlled by No. 40.50 E A 17
a 2-gang switch (conduit run not exceeding
12m)
A 018 NA Three lighting or fan points controlled No. 63.30 E A 18
by a 3-gang switch (conduit run not
exceeding 18m)
A 019 NA Each additional lighting point in one No. 9.50 E A 19
looping circuit to items 015 to 018
(conduit run not exceeding 5m)
A 020 NA Each additional lighting or fan point in No. 18.90 E A 20
one looping circuit to items 015 to
018 (conduit run exceeding 5m but not
exceeding 10m)
A 021 NA One lighting or fan point controlled by No. 52.70 E A 21
two 2-way switch (conduit run not
exceeding 12m)
ID : KMC/iy/ElecWorks (FY2012).xls (2) (21.10.2011) (May/147-3)
SOR Page 3
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
PUBLIC LIGHTING POINT'S WIRING IN
PVC TRUNKING
Items 022 to 027 are for the
installation of new public lighting points.
The application of any combination of
items 022 to 027 in a single works order
shall not exceed a total of 30 nos.
per building block. Lighting point
exceeding 30 nos. per building block shall
be built-up from other sections of this
Schedule of Rates
* Surface wiring for one public lighting
point comprising 3 x 2.5mm2 PVC
attached cables in PVC trunking of the
following trunking run (ceiling rose,
mounting block and wiring in pipe conduit
to be measured separately) *(022 027)
A 022 NA Not exceeding 10m per point (applicable No. 21.55 E A 22
for not more than 5 nos. of lighting point
per block)
A 023 NA Not exceeding 10m per point (applicable No. 21.10 E A 23
for between 6 to 10 nos. of lighting point
per block)
A 024 NA Not exceeding 10m per point (applicable No. 20.85 E A 24
for between 11 to 30 nos. of lighting point
per block)
A 025 NA Exceeding 10m but not exceeding 16m No. 34.00 E A 25
per point (applicable for not more than 5
nos. of lighting point per block)
A 026 NA Exceeding 10m but not exceeding 16m No. 33.55 E A 26
per point (applicable for between 6 to
10 nos. of lighting point per block)
A 027 NA Exceeding 10m but not exceeding 16m No. 33.30 E A 27
per point (applicable for between 11 to
30 nos. of lighting point per block)
B. RISING MAIN, SUBMAIN, CIRCUIT
WIRING AND CABLE
RISING MAIN
* Rising main of 600/1000 volts PVC/PVC
sheathed cable of the following size
(metal trunking/tray to be measured
separately) :- *(001 009)
B 001 NA 4 x 150 mm2 with 70mm2 PVC sheathed m 88.90 E B 1
earth cable
B 002 NA 4 x 120 mm2 with 70mm2 PVC sheathed m 69.60 E B 2
earth cable
B 003 NA 4 x 95 mm2 with 50mm2 PVC sheathed m 56.70 E B 3
earth cable
ID : KMC/iy/ElecWorks (FY2012).xls (3) (21.10.2011) (May/147-3)
SOR Page 4
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
B 004 NA 4 x 70 mm2 with 35mm2 PVC sheathed m 42.80 E B 4
earth cable
B 005 NA 4 x 50 mm2 with 25mm2 PVC sheathed m 32.00 E B 5
earth cable
B 006 NA 4 x 35 mm2 with 16mm2 PVC sheathed m 25.40 E B 6
earth cable
B 007 NA 4 x 25 mm2 with 16mm2 PVC sheathed m 19.80 E B 7
earth cable
B 008 NA 4 x 16 mm2 with 16mm2 PVC sheathed m 14.30 E B 8
earth cable
B 009 NA 4 x 10 mm2 with 10mm2 PVC sheathed m 9.60 E B 9
earth cable
SUBMAIN/CIRCUIT WIRING
* Submain/circuit wiring of 600/1000 volts
PVC/PVC sheathed cable of the following
size (PVC trunking/conduit to be
measured separately) :- *(010 014)
B 010 NA 2 x 25 mm2 with 16mm2 PVC sheathed m 8.90 E B 10
earth cable
B 011 NA 2 x 16 mm2 with 16mm2 PVC sheathed m 6.50 E B 11
earth cable
B 012 NA 2 x 10 mm2 with 10mm2 PVC sheathed m 4.40 E B 12
earth cable
B 013 NA 2 x 6 mm2 with 6mm2 PVC sheathed m 3.60 E B 13
earth cable
B 014 NA 2 x 4 mm2 with 4mm2 PVC sheathed m 3.10 E B 14
earth cable
CIRCUIT WIRING
* Circuit wiring/wiring of 600/1000 volts
PVC/PVC sheathed cable of the following
size (PVC trunking/conduit to be
measured separately) *(015 016)
B 015 NA 2 x 2.5 mm2 with 2.5mm2 PVC sheathed m 2.60 E B 15
earth cable
B 016 NA 2 x 1.5 mm2 with 2.5mm2 PVC sheathed m 2.40 E B 16
earth cable
ID : KMC/iy/ElecWorks (FY2012).xls (4) (21.10.2011) (May/147-3)
SOR Page 5
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
* Circuit wiring/wiring of 600/1000 volts
PVC sheathed cable of the following size
(PVC trunking/conduit to be measured
separately) *(017 019)
B 017 NA 2 x 4 mm2 with 4mm2 PVC sheathed m 3.00 E B 17
earth cable
B 018 NA 2 x 2.5 mm2 with 2.5mm2 PVC sheathed m 2.60 E B 18
earth cable
B 019 NA 2 x 1.5 mm2 with 2.5mm2 PVC sheathed m 2.20 E B 19
earth cable
EARTH WIRING
* Single PVC sheathed green & yellow
colour earth wire of the following
size:- *(020 027)
B 020 NA 2.5 mm2 to 4mm2 m 1.30 E B 20
B 021 NA 6 mm2 m 1.60 E B 21
B 022 NA 10 mm2 m 2.10 E B 22
B 023 NA 16 mm2 m 2.90 E B 23
B 024 NA 25 mm2 m 4.20 E B 24
B 025 NA 35 mm2 m 5.00 E B 25
B 026 NA 50 mm2 m 6.60 E B 26
B 027 NA 70 mm2 m 8.10 E B 27
FIRE RESISTANT CABLE
(S'pore Cable Manufacturer, Fujikuca,
Enamelled Wire & Cable, Sigma, Tai Sin,
Nexan)
* 600/1000 volts PE or EPR fire resistant
wiring/cable with PVC sheath of the
following size (cables trunking/tray to be
measured separately) *(028 030)
B 028 NA 2 x 2.5mm2 m 6.80 E B 28
B 029 NA 4 x 16 mm2 m 20.00 E B 29
B 030 NA 4 x 25 mm2 m 24.00 E B 30
UNDERGROUND CABLE
(S'pore Cable Manufacturer, Sigma,
Enamelled Wire & Cable, Tai Sin, Wilson)
* 600/1000 Volts PVC/SWA/PVC
underground cable of the following size
including laying in trench but excluding
excavation:- *(031 044)
B 031 NA 4mm2 3-core m 4.00 E B 31
B 032 NA 6mm2 2-core m 4.80 E B 32
ID : KMC/iy/ElecWorks (FY2012).xls (5) (21.10.2011) (May/147-3)
SOR Page 6
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
B 033 NA 6mm2 3-core m 5.90 E B 33
B 034 NA 10mm2 2-core m 7.40 E B 34
B 035 NA 10mm2 3-core m 8.40 E B 35
B 036 NA 16mm2 2-core m 9.00 E B 36
B 037 NA 25mm2 2-core m 10.10 E B 37
B 038 NA 50mm2 2-core m 15.70 E B 38
B 039 NA 6mm2 4-core m 6.80 E B 39
B 040 NA 10mm2 4-core m 9.00 E B 40
B 041 NA 16mm2 4-core m 22.80 E B 41
B 042 NA 25mm2 4-core m 28.80 E B 42
B 043 NA 35mm2 4-core m 32.80 E B 43
B 044 NA 50mm2 4-core m 37.80 E B 44
SURFACE WIRING IN GALVANISED
STEEL CONDUIT/METAL TRUNKING
* PVC/PVC sheathed interconnecting
cable including bracket terminations, lugs
and conduit/metal trunking etc. of the
following size (between main switchboard
and lighting distribution board) *(045 051)
B 045 NA 2 x 6 mm2 with 6mm2 PVC earth cable m 10.40 E B 45
B 046 NA 2 x 10 mm2 with 10mm2 PVC earth m 11.05 E B 46
cable
B 047 NA 2 x 16 mm2 with 16mm2 PVC earth m 12.80 E B 47
cable
B 048 NA 2 x 25 mm2 with 16mm2 PVC earth m 16.60 E B 48
cable
B 049 NA 2 x 50 mm2 with 25mm2 PVC earth m 19.50 E B 49
cable
B 050 NA 4 x 10 mm2 with 10mm2 PVC earth cable m 12.90 E B 50
B 051 NA 4 x 25 mm2 with 16mm2 PVC earth m 20.95 E B 51
cable
UNDERGROUND CABLE JOINT
B 052 NA Underground straight cable joint for No 40.85 E B 52
2 x 6/10/16 mm2 or for 4 x 6/10/16 mm2
PVC/SWA/PVC cables
B 053 NA Underground straight cable joint for No 57.80 E B 53
2 x 25/50 mm2 or for 4 x 25/50 mm2
PVC/SWA/PVC cables
B 054 NA Underground Tee-joint for 2 core x 6mm2 No 52.40 E B 54
to 2 core x 25mm2 PVC/SWA/PVC cables
ID : KMC/iy/ElecWorks (FY2012).xls (6) (21.10.2011) (May/147-3)
SOR Page 7
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
FLEXIBLE CABLE
B 055 NA 3 core 1.5mm2 PVC/PVC flexible cable m 1.50 E B 55
B 056 NA 3 core 2.5mm2 PVC/PVC flexible cable m 2.10 E B 56
BUS BAR
B 057 NA Tinned copper busbar including fixing kg 18.40 E B 57
accessories and connection
C. CABLE GLAND & LUG
CABLE GLAND
* Brass compression gland (Type BW)
including brass locknut, earth tag,
shroud, connection to cable and mounting
bracket for the following cable :- *(001 010)
C 001 NA 6mm2 2 or 3 core PVC/SWA/PVC No 9.40 E C 1
C 002 NA 10mm2 2 or 3 core PVC/SWA/PVC No 10.80 E C 2
C 003 NA 16mm2 2 or 3 core PVC/SWA/PVC No 11.85 E C 3
C 004 NA 25mm2 2 or 3 core PVC/SWA/PVC No 14.00 E C 4
C 005 NA 50mm2 2 or 3 core PVC/SWA/PVC No 17.85 E C 5
C 006 NA 6mm2 4 core PVC/SWA/PVC No 10.20 E C 6
C 007 NA 10mm2 4 core PVC/SWA/PVC No 12.00 E C 7
C 008 NA 16mm2 4 core PVC/SWA/PVC No 14.65 E C 8
C 009 NA 25mm2 4 core PVC/SWA/PVC No 17.45 E C 9
C 010 NA 35mm2 4 core PVC/SWA/PVC No 18.55 E C 10
CABLE LUG
* Supply and fix cable lug of the following
size *(011 020)
C 011 NA 4mm2, 6mm2 or 10mm2 No. 1.30 E C 11
C 012 NA 16mm2 or 25mm2 No. 1.50 E C 12
C 013 NA 35mm2 No. 1.80 E C 13
C 014 NA 50mm2 No. 2.40 E C 14
C 015 NA 70mm2 No. 2.70 E C 15
C 016 NA 95mm2 No. 3.00 E C 16
C 017 NA 120mm2 No. 3.60 E C 17
C 018 NA 150mm2 No. 4.20 E C 18
C 019 NA 185mm2 No. 4.45 E C 19
C 020 NA 240mm2 No. 6.60 E C 20
ID : KMC/iy/ElecWorks (FY2012).xls (7) (21.10.2011) (May/147-3)
SOR Page 8
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
CABLE LINK
Cable link shall only be used in cases
where the existing cables are damaged
due to fire, theft or vandalism and need
urgent replacement or when the length
of cable required for the work is more
than the maximum length available
in the market. Prior approval of the
Superintending Officer shall be obtain
if the links are to be used in situations
other than those described above
* Supply and fix cable link of the
following sizes : *(021 033)
C 021 NA 1.5mm2 and 2.5mm2 No. 0.25 E C 21
C 022 NA 4mm2 and 6mm2 No. 0.50 E C 22
C 023 NA 10mm2 No. 0.70 E C 23
C 024 NA 16mm2 No. 0.90 E C 24
C 025 NA 25mm2 No. 1.30 E C 25
C 026 NA 35mm2 No. 1.60 E C 26
C 027 NA 50mm2 No. 2.10 E C 27
C 028 NA 70mm2 No. 2.60 E C 28
C 029 NA 95mm2 No. 2.80 E C 29
C 030 NA 120mm2 No. 3.30 E C 30
C 031 NA 150mm2 No. 3.70 E C 31
C 032 NA 185mm2 No. 4.20 E C 32
C 033 NA 240mm2 No. 5.10 E C 33
EARTH WIRE TAP
C 034 NA 25mm2/35mm2 earth wire tap No. 1.80 E C 34
C 035 NA 50mm2/70mm2 earth wire tap No. 2.80 E C 35
D. CONDUIT, TRUNKING & CABLE
TRAY
CONDUIT
(Barton, Maruchi, Walsall, Burns)
* Galvanised steel conduit of the following
diameter fixed to wall, or ceiling
complete with spacer bar, saddle,
inspection box/junction/bend/tee,
elbow and joint accessories *(001 003)
D 001 NA 20mm m 3.40 E D 1
D 002 NA 25mm m 4.00 E D 2
D 003 NA 32mm m 5.90 E D 3
ID : KMC/iy/ElecWorks (FY2012).xls (8) (21.10.2011) (May/147-3)
SOR Page 9
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
* Super high impact heavy gauge PVC
conduit of the following diameter fixed to
wall or ceiling complete with
spacer bar, saddle, inspection box,
junction/bend/tee, elbow and joint
accessories *(004 007)
D 004 NA 20mm m 1.50 E D 4
D 005 NA 25mm m 1.70 E D 5
D 006 NA 32mm m 2.40 E D 6
D 007 NA 38mm m 4.80 E D 7
PVC TRUNKING
(Waller, Litaflex, Chung Shan)
* Approved PVC trunking of the following
size *(008 013)
D 008 NA 25mm x 12.5mm single compartment m 1.80 E D 8
D 009 NA 32mm x 16mm single compartment m 1.90 E D 9
D 010 NA 40mm x 20mm single compartment m 2.10 E D 10
D 011 NA 60mm x 20mm two compartments m 3.00 E D 11
D 012 NA 80mm x 32mm two compartments m 4.80 E D 12
D 013 NA 100mm x 40mm three compartments m 8.00 E D 13
METAL TRUNKING
(Ekko, Sakiya, Li-Soon, Ega, EM
Industries)
* Electrogalvanised metal trunking finished
in epoxy paint complete with coupling,
detachable cover, screws and joint
accessories including fixing to walls
or ceilings of the following size :- *(014 034)
D 014 NA 1.2mm thick 50mm x 50 mm m 8.50 E D 14
D 015 NA 1.2mm thick 75mm x 50 mm m 10.10 E D 15
D 016 NA 1.2mm thick 75mm x 75 mm m 11.25 E D 16
D 017 NA 1.2mm thick 100mm x 25 mm m 10.40 E D 17
D 018 NA 1.2mm thick 100mm x 50 mm m 11.60 E D 18
D 019 NA 1.2mm thick 100mm x 75 mm m 13.00 E D 19
D 020 NA 1.4mm thick 110mm x 100 mm m 16.10 E D 20
D 021 NA 1.4mm thick 125mm x 50 mm m 14.50 E D 21
D 022 NA 1.4mm thick 150mm x 25 mm m 13.00 E D 22
ID : KMC/iy/ElecWorks (FY2012).xls (9) (21.10.2011) (May/147-3)
SOR Page 10
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
D 023 NA 1.4mm thick 150mm x 50 mm m 14.80 E D 23
D 024 NA 1.4mm thick 150mm x 75 mm m 16.50 E D 24
D 025 NA 1.4mm thick 150mm x 100 mm m 18.40 E D 25
D 026 NA 1.6mm thick 150mm x 150 mm m 22.60 E D 26
D 027 NA 1.6mm thick 175mm x 50 mm m 17.40 E D 27
D 028 NA 1.6mm thick 200mm x 50 mm m 18.70 E D 28
D 029 NA 1.6mm thick 200mm x 75 mm m 19.20 E D 29
D 030 NA 1.6mm thick 200mm x 100 mm m 22.00 E D 30
D 031 NA 1.6mm thick 225mm x 50 mm m 20.40 E D 31
D 032 NA 1.6mm thick 250mm x 50 mm m 22.30 E D 32
D 033 NA 1.6mm thick 300mm x 25 mm m 23.00 E D 33
D 034 NA 1.6mm thick 300mm x 50 mm m 24.70 E D 34
METAL TRUNKING COVER
* Electro galvanised steel detachable
trunking cover finished with epoxy coating
and fixed to existing trunking of the
following size:- *(035 042)
D 035 NA 1.2mm thick, 50 x 25mm or 50 x 50mm m 3.40 E D 35
D 036 NA 1.2mm thick, 75 x 50mm or 75 x 75mm m 3.90 E D 36
D 037 NA 1.2mm thick, 100 x 25mm to 100mm m 4.55 E D 37
D 038 NA 1.2mm thick, 125 x 50mm m 5.35 E D 38
D 039 NA 1.2mm thick, 150 x 25mm to 150mm m 6.10 E D 39
D 040 NA 1.2mm thick, 175 x 50mm m 7.00 E D 40
D 041 NA 1.4mm thick, 200 x 50mm m 8.90 E D 41
D 042 NA 1.4mm thick, 200 x 75mm m 8.90 E D 42
CABLE TRAY
* Hot dipped galvanised perforated mild
steel cable tray of the following size
including hanger, support and
fixing *(043 047)
D 043 NA 150mm width, 1.0mm thick m 14.00 E D 43
D 044 NA 225mm width, 1.2mm thick m 20.20 E D 44
D 045 NA 300mm width, 1.6mm thick m 24.50 E D 45
D 046 NA 450mm width, 1.6mm thick m 34.25 E D 46
D 047 NA 600mm width, 2.0mm thick m 39.10 E D 47
ID : KMC/iy/ElecWorks (FY2012).xls (10) (21.10.2011) (May/147-3)
SOR Page 11
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
CONDUIT PIPE FOR ROAD CROSSING
* UPVC class "C" pipe of the following
diameter for road crossing laid in trench
(trench measured separately) *(048 051)
D 048 NA 50mm m 1.70 E D 48
D 049 NA 80mm m 2.90 E D 49
D 050 NA 100mm m 4.50 E D 50
D 051 NA 150mm m 7.20 E D 51
PVC FLEXIBLE CONDUIT
* PVC flexible conduit of the following
diameter *(052 054)
D 052 NA 20mm m 2.20 E D 52
D 053 NA 25mm m 2.80 E D 53
D 054 NA 32mm m 3.70 E D 54
E. SWITCH, SOCKET OUTLET AND
CONSUMER UNIT
SWITCH
E 001 NA PVC mounting box for switch or socket No. 0.95 E E 1
outlet (1 gang or 2 gang)
E 002 NA Metal mounting box for switch or socket No. 1.45 E E 2
outlet (1 gang or 2 gang)
* 5 to 10 Amp white rocker plate switch
for the following :-
(MK, Delta, Crabtree, Tenby, Clipsal,
Hager) *(003 006)
E 003 NA 1-way or 2-way switch No. 5.40 E E 3
E 004 NA 2 gang switch No. 6.70 E E 4
E 005 NA 3 gang switch No. 8.30 E E 5
E 006 NA 4 gang switch No. 12.60 E E 6
E 007 NA 5 to 10 Amp metal clad switch 1 gang No. 10.30 E E 7
(MK, Delta, Clipsal, PDL, Hager)
E 008 NA 5 to 10 Amp metal clad switch 2 gang No. 13.20 E E 8
or 4 gang (MK, Delta, Clipsal, PDL, Hager)
E 009 NA 20 Amp DP water heater switch with pilot No. 15.50 E E 9
lamp
E 010 NA 20 Amp DP switch No. 12.80 E E 10
E 011 NA 5 - 10 Amp weatherproof (IP66) No. 58.00 E E 40
I-gang switch
ID : KMC/iy/ElecWorks (FY2012).xls (11) (21.10.2011) (May/147-3)
SOR Page 12
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
ISOLATOR
* Metal Clad and/or weatherproof Isolator
Switch of the following rating :
(MEM, SMB, S-Team, Clipsil, ABB and
Hager) *(012 015)
E 012 NA 20 to 40 Amp DP No. 64.00 E E 11
E 013 NA 63 Amp DP No. 80.00 E E 12
E 014 NA 20 to 40 Amp TPN No. 73.30 E E 13
E 015 NA 63 to 100 Amp TPN No. 145.20 E E 14
E 016 NA 20 Amp to 63 Amp DP non-weather proof No. 60.00 E E 15
and non-metal clad isolator switch
E 017 NA 125A 4Pole Auto Transfer Switch, No. 1,955.00 E E 39
Socomec, S-Team or other approved c/w
control wire at existing MSB
SOCKET OUTLET
* Switch socket-outlet of the following
type : (MK, Tenby, Delta, Crabtree,
Clipsal) *(018 025)
E 018 NA 13 Amp No. 6.50 E E 16
E 019 NA 13 Amp, 2 gang No. 12.30 E E 17
E 020 NA 13 Amp metal clad No. 8.90 E E 18
E 021 NA 13 Amp metal clad, 2 gang No. 15.60 E E 19
E 022 NA 13 Amp weatherproof No. 75.00 E E 20
E 023 NA 15 Amp weatherproof No. 86.00 E E 21
E 024 NA 15 Amp No. 11.50 E E 22
E 025 NA 15 Amp, metal clad No. 12.20 E E 23
FUSED PLUG
E 026 NA 13 Amp 3 pin plug No. 4.30 E E 24
E 027 NA 15 Amp 3 pin plug No. 7.20 E E 25
E 028 NA 15 Amp 3 pin weatherproof plug No. 33.95 E E 26
CONSUMER CONTROL UNIT
* Insulated consumer control unit complete
with 40 or 63 Amp RCCB (30 to 100 mA),
32 Amp DP or 63 Amp DP isolator
including:- (ABB, Mem, Sunlight, SMB,
Syntech, S-Team) *(029 033)
ID : KMC/iy/ElecWorks (FY2012).xls (12) (21.10.2011) (May/147-3)
SOR Page 13
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
E 029 NA 4 x 5 to 20Amp 6KA MCB No. 140.90 E E 27
E 030 NA 6 x 5 to 20Amp 6KA MCB No. 162.80 E E 28
E 031 NA 8 x 5 to 20Amp 6KA MCB No. 184.30 E E 29
E 032 NA 10 x 5 to 20Amp 6KA MCB No. 209.90 E E 30
E 033 NA 12 x 5 to 20Amp 6KA MCB No. 232.90 E E 31
* Metal clad consumer control unit
complete with 40 or 63Amp RCCB
(30 to 100 mA), 32 Amp DP or 63 Amp
DP isolator including :-
(ABB, Mem, Sunlight, F & G, SMB, Syntech,
S-Team) *(034 038)
E 034 NA 4 x 5 to 20Amp 6KA MCB No. 184.30 E E 32
E 035 NA 6 x 5 to 20Amp 6KA MCB No. 194.00 E E 33
E 036 NA 8 x 5 to 20Amp 6KA MCB No. 203.70 E E 34
E 037 NA 10 x 5 to 20Amp 6KA MCB No. 242.50 E E 35
E 038 NA 12 x 5 to 20Amp 6KA MCB No. 261.90 E E 36
E 039 NA Metal clad split load consumer unit with No. 166.20 E E 37
32 or 63A Amp DP isolator, 2 x 20A SP
MCB, with 40 or 63Amp DP RCCB (30 to
100 mA) and 6 x 5/20 Amp 6KA SP
MCB (ABB Mem, Sunlight, SMB,
S-Team)
E 040 NA Metal clad split-load consumer No. 232.80 E E 38
control unit with 32 or 60 Amp DP isolator,
3 x 20A sp MCB, 40 or 63 Amp DP RCCB
(30 to 100 mA) and 7 x 5/20A 6KA SP
MCB (ABB, Mem, Sunlight, SMB, Syntech,
S-Team)
F. CONNECTOR, CUT-OUT, FUSE,
TAP-OFF UNIT AND CIRCUIT BREAKER
B.I. CONNECTOR
* B.I. Connector of the following circuit
rating :- (Lucy, Quintela or other
approved) *(001 005)
F 001 NA 30 Amp to 40 Amp No. 5.80 E F 1
F 002 NA 60 Amp No. 6.80 E F 2
F 003 NA 100 Amp (1 in 1 out to 1 in 4 out) No. 13.60 E F 3
F 004 NA 150 Amp (1 in 1 out to 1 in 4 out) No. 29.10 E F 4
F 005 NA 200 Amp (1 in 1 out to 1 in 4 out) No. 33.95 E F 5
ID : KMC/iy/ElecWorks (FY2012).xls (13) (21.10.2011) (May/147-3)
SOR Page 14
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
LINE TAP
* Line tap with hexagon screws and felt
of the following size :- *(006 010)
F 006 NA 18 mm2 No. 6.90 E F 6
F 007 NA 30 mm2 No. 8.65 E F 7
F 008 NA 50 mm2 No. 14.55 E F 8
F 009 NA 75 mm2 No. 20.85 E F 9
F 010 NA 90 to 120 mm2 No. 43.65 E F 10
FUSE LINK
* HRC cartridge fuse link only of the
following current rating :-
(MEM, English Electric, Legrand) *(011 015)
F 011 NA 5 to 15 Amp No. 2.40 E F 11
F 012 NA 16 to 24 Amp No. 2.80 E F 12
F 013 NA 25 to 40 Amp No. 3.20 E F 13
F 014 NA 60 Amp / 63 Amp No. 6.00 E F 14
F 015 NA 100 Amp No. 12.10 E F 15
* HRC cartridge fuse link of the following
current rating with carrier and base
(MEM, English, Electra,
Legrand) *(016 020)
F 016 NA 5 to 15 Amp No. 9.70 E F 16
F 017 NA 16 to 24 Amp No. 10.55 E F 17
F 018 NA 25 to 40 Amp No. 11.20 E F 18
F 019 NA 60 Amp / 63 Amp No. 18.60 E F 19
F 020 NA 100 Amp No. 25.30 E F 20
* Bolted type HRC fuse link of the
following current rating :-
(MEM, English Electric,
Legrand) *(021 027)
F 021 NA 20 to 40 Amp No. 3.40 E F 21
F 022 NA 63 Amp No. 5.80 E F 22
F 023 NA 100 Amp No. 11.95 E F 23
F 024 NA 160 Amp No. 14.15 E F 24
ID : KMC/iy/ElecWorks (FY2012).xls (14) (21.10.2011) (May/147-3)
SOR Page 15
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
F 025 NA 200 Amp No. 15.50 E F 25
F 026 NA 300 Amp No. 22.30 E F 26
F 027 NA 400 Amp to 600 Amp No. 49.95 E F 27
TAP-OFF UNIT
(ABB, Sunlight, SMB, S-Team, syntech)
F 028 Single phase tap-off box with 60 Amp to No. 220.00 E F 28
80 Amp 25 KA 240V DP MCCB, 2 x
95mm2 line-tap connectors, BI connector,
earth connector and earthing terminal
F 029 Single phase tap-off box with 2 x 60 Amp No. 280.00 E F 29
25KA 240V DP MCCB, 2 x 95mm2 line-
tap connectors, BI connectors, earth
connectors and earthing terminal
F 030 NA Three phase fused tap-off box with 4 x No. 339.50 E F 30
95 mm2 line-tap connectors, BI connectors
25KA 150 Amp TP MCCB and earth link
F 031 Three phase fused tap-off box with 4 x No. 310.40 E F 31
95 mm2 line tap connectors, BI connectors
25KA 60A or 100A TP MCCB and earth link
F 032 NA Three phase 60 Amp to 100 Amp unfused No. 131.00 E F 32
tap-off unit with 50 mm2 line-tap
connector, neutral connector and earth link
MINIATURE CIRCUIT BREAKER (MCB)
F 033 NA Mounting box for RCCB or MCB No. 9.70 E F 33
* MCB type B or C with short circuit of the
following rating (ABB, Merlin Gerin,
Mitsubishi, Hager, GEWISS) *(034 037)
F 034 NA Minimum 6 KA or 10 KA interrupting No. 16.60 E F 34
capacity 6 - 40 Amp SP 240V
F 035 NA Minimum 10 KA interrupting capacity No. 55.65 E F 35
50 - 63 Amp DP 240V
F 036 NA Minimum 10 KA interrupting capacity No. 62.30 E F 36
10 - 63 Amp TP 400V
F 037 NA Minimum 6KA or 10KA interrupting No. 27.15 E F 37
capacity 6 - 40 Amp DP 240V
MOULDED CASE CIRCUIT BREAKER
(MCCB)
* MCCB of the following rating (Hitachi,
ABB Merlin Gerin, Terasaki,
Mitsubishi) *(038 044)
F 038 NA Minimum 25 KA short circuit interrupting No. 150.00 E F 38
capacity, 15 - 100 Amp 240V DP
ID : KMC/iy/ElecWorks (FY2012).xls (15) (21.10.2011) (May/147-3)
SOR Page 16
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
F 039 NA Minimum 25 KA short circuit interrupting No. 211.00 E F 39
capacity, 15 - 100 Amp 415V TP
F 040 NA Minimum 36 - 50 KA short circuit No. 351.30 E F 40
interrupting capacity, 125 - 225 Amp
415V TP
F 041 NA Minimum 36 - 50 KA short circuit No. 515.40 E F 41
interrupting capacity, 250 - 400Amp
415V TP
F 042 NA 50 KA short-circuit interrupting No. 974.70 E F 42
capacity 450 - 600Amp 415V TP
F 043 NA 50 KA short-circuit interrupting No. 1,681.10 E F 43
capacity 700 - 800Amp 415V TP
F 044 NA 50 KA short-circuit interrupting No. 1,800.00 E F 44
capacity 1000 - 1600Amp 415V TP
AIR CIRCUIT BREAKER (ACB)
F 045 NA Remove existing ACB including No. 53.35 E F 45
reinstatement and disposal off site (New
ACB to be measured separately)
* ACB with overload and short circuit
protection control unit, drawout type of
the following rating including necessary
connecting wirings (Removal of existing
ACB to be measured
separately) *(046 047)
F 046 NA Minimum 50 KA 3 capacity 1000A to No. 4,607.00 E F 46
1600A 415V TP
F 047 NA Minimum 50 KA 3 capacity above 1600A No. 7,459.00 E F 47
up to 3200A 415V TP
RESIDUE CURRENT CIRCUIT BREAKER
* Residue Current Circuit Breaker (RCCB)
with built-in anti-nuisance tripping
device and trip indication of the
following rating (MG, Hager, F & G,
ABB) *(048 050)
F 048 NA 40A 2P 30mA to 300mA No. 47.00 E F 48
F 049 NA 63A 2P 30mA to 300mA No. 68.10 E F 49
F 050 NA 40A or 63A 4P 30mA to 300mA No. 118.70 E F 50
STREET LIGHTING CUT-OUT
F 051 NA Street lighting cut-outs 25 Amps, 240 No 34.90 E F 51
Volts (1 or 2 tag type)
ID : KMC/iy/ElecWorks (FY2012).xls (16) (21.10.2011) (May/147-3)
SOR Page 17
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
F 052 NA `BICC' Cat No. G72522-03 or other No 33.45 E F 52
approved cable with glandplate and
wormdrive clips for attaching to street
lighting cutout
F 053 NA `BICC' Cat No. G72569-02 or other No 37.35 E F 53
approved 3 phase adaptor with bottom
plate for attaching to street lighting cutout
G. SWITCHBOARD, DISTRIBUTION
BOARD AND SWITCHROOM
ACCESSORIES
METER
G 001 NA Ammeter - current transformer operated No. 21.50 E G 1
(0 to 100A or up to 1600A)
(Bilt, Nitech, Rudolf)
G 002 NA Voltmeter - rotary wafer type (0 to 500V) No. 22.90 E G 2
(Celsa, Crompton, Rudolf)
G 003 NA Voltmeter & ammeter selector switch No. 16.60 E G 3
(K & N, Blueline, Selko, Telux)
G 004 NA Maximum demand ammeter (0 to 100A No. 94.50 E G 4
or up to 1600A, excluding current
transformers) (Celsa, Crompton)
INDICATOR BULB
G 005 NA Indicator bulb with built-in No. 10.60 E G 5
transformer (Ideelzumi or other approved)
G 006 NA LED indicator bulb (LED) with built-in No. 27.15 E G 6
transformer
G 007 NA 6V, 3W indicator bulb for main No. 1.95 E G 7
switchboard (Ozon, Splendour, Sylvania)
G 008 NA 6V, LED indicator bulb for main No. 13.60 E G 8
switchboard (Ideelzumi or other approved)
RELAY
G 009 NA Earth fault relay with built-in timer No. 186.80 E G 9
(excluding injection test on site
and current transformer) (Kasuga, Rudolf
or other approved)
G 010 NA Earth leakage Relay (ELR) with sensitivity No. 160.00 E G 10
adjustment of 0.03A to 20A, time delay
0.0 to 0.5 second without current
transformer
G 011 NA Earth leakage relay (ELR) with sensitivity No. 240.00 E G 11
adjustment of 0.03A to 20A, time delay
0.0 to 0.5 sec complete with
current transformer
G 012 NA DTL over current relay with built-in timer No. 324.80 E G 12
(excluding injection test on site and
current transformer) (Kasuga, Rudolf,
Mun Hean, Socomec or other approved)
ID : KMC/iy/ElecWorks (FY2012).xls (17) (21.10.2011) (May/147-3)
SOR Page 18
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
G 013 NA IDMTL digital overcurrent relay No. 1,500.00 E G 13
including panel and wiring modification
(excluding injection test on site and
current tranformer) (Rudolf, Kasuga,
Mun Hean, Socomec or other approved)
TRANSFORMER
* Protective Transformer Class 5P10
(Nitech, Bilt, Rudolf) *(014 020)
G 014 NA CT Ratio 100/5 No. 48.50 E G 14
G 015 NA CT Ratio 200/5 to 300/5 No. 63.90 E G 15
G 016 NA CT Ratio 400/5 No. 66.15 E G 16
G 017 NA CT Ratio 600/5 to 800/5 No. 67.20 E G 17
G 018 NA CT Ratio 1000/5 to 1400/5 No. 78.40 E G 18
G 019 NA CT Ratio 1600/5 No. 82.85 E G 19
G 020 NA CT for earth Leakage Relay No. 80.00 E G 20
* Metering current transformer Class 1
(Nitech, Bilt, Rudolf) *(021 025)
G 021 NA CT Ratio 100/5 No. 25.30 E G 21
G 022 NA CT Ratio 200/5 to 400/5 No. 24.30 E G 22
G 023 NA CT Ratio 600/5 to 800/5 No. 24.90 E G 23
G 024 NA CT Ratio 1000/5 to 1400/5 No. 32.30 E G 24
G 025 NA CT Ratio 1600/5 No. 37.80 E G 25
CONTACTOR
* Contactor of the following ratings :-
(Blueline, Hitachi, Mistsubishi, Hager,
Stromberg) *(026 029)
G 026 NA 20 to 40 Amp DP No. 58.50 E G 26
G 027 NA 20 to 40 Amp 4P No. 67.70 E G 27
G 028 NA 63 Amp DP No. 116.40 E G 28
G 029 NA 60 Amp 4P No. 145.50 E G 29
NEUTRAL LINK
* Supply and fix Neural link of the
following rating:- *(030 032)
G 030 NA 30A to 60A No. 10.65 E G 30
G 031 NA 100A to 200A No. 14.15 E G 31
G 032 NA 250A to 800A No. 36.85 E G 32
ID : KMC/iy/ElecWorks (FY2012).xls (18) (21.10.2011) (May/147-3)
SOR Page 19
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
DISTRIBUTION BOARD / METERBOX
G 033 Indoor Service Electrical Distribution Set 1,400.00 E G 33
Panels (OG Box) complete with :
4 Nos. 630A Strip Fuse Way
6 Nos. 630A Solid Link
3 Nos. 200A HRC Fuse Link
2 Nos. Cast Resin Insulator
3 Nos. 70mm2 Earth braid with lugs
3 Nos. 70mm2 cable clip
1 No. 1720mm x 610mm x 350mm Metal
Enclosure with Panel Lock (Sunlight,
SMB, S-team, Spanners)
G 034 Lighting distribution board with metal Set 560.00 E G 34
enlosure complete with :-
1 no. LTA's approved Omron 'Zen' or
Siemen "LOGO" 4-output digital time
switch 4 no. 1 to 20 Amp MCB (6 to
10KA) 1 no. 30A DP MCCB (25KA) and
1 no. 100MA to 300MA 40A DP RCCB
1 no. 30A TP Contactor
1 no. 30/60A DP`by-pass' switch and all
internal wiring and connection
(ABB, Sunlight, SMB, S-Team, Syntech)
G 035 Electrical meter box complete with :- No. 220.00 E G 35
1 No. 32A/40A DP MCB type C 10KA
1 No. 32A/40A DP MCB type B 10 KA
2 Nos. 3 way connector
1 set 2 x 10mm2 PVC cable
1 No. insulated enclosure (IP40)
with UV stabilised and water tight
viewing lens (ABB, Sunlight, SMB, Syntech
S-team)
G 036 NA Replace cover for electrical meter box No. 70.00 E G 36
with UV stabilised and water tight viewing
lens including dismantling, modify the lock to
suit the existing. Complete with colour
labelling for the unit no. and disposal of the
old cover
G 037 NA Provide 2 Nos. BI connectors at the No. 45.00
meterboard c/w site modification to suit the
existing
G 038 NA 2mm thick transparent fibre board to m2 213.40 E G 37
main switch board/distribution board with
laminated surface on one side complete
with necessary label and cutting of slot
and opening for electrical devices
TIMESWITCH
G 039 NA Electromechanical time switch with No. 80.00 E G 38
miniumum 72 to 150 hours battery reserve
(Hager, Horstmann, Legrand, Theben)
G 040 NA Digital time switch with 24 hours or No. 116.00 E G 39
7 days programming (Hager, Legrand,
Theben, Merlin Gerlin, ABB)
ID : KMC/iy/ElecWorks (FY2012).xls (19) (21.10.2011) (May/147-3)
SOR Page 20
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
G 041 NA 32A to 63A By-pass switch DP or TP No. 48.50 E G 40
(Blueline, Hitachi, Mitsubishi, Stromberg)
G 042 LTA's approved 4-output digital time No. 156.00 E G 41
switch (Omron 'Zen-10C' or Siemen
"LOGO")
PHOTO SENSOR/PHOTO CUM MOTION
SENSOR
G 043 NA Legrand 91686 photo cum motion sensor No. 350.00
c/w adjustable switch between 0.5 and 2000 lux, supplied with cable gland and fixing
bracket, IP55
G 044 NA PDL 360SP indoor PIR sensor for recessed No. 250.00
or suface mount
G 045 NA PDL WDL10 sunset switch c/w adjustable No. 350.00
20 to 100 Lux, IP56
TIMBER TEAK BOARD
G 046 NA 25mm thick timber teak board including m2 130.00 E G 42
mounting to wall and fixing screws and
finished with 3 coats of varnish
EARTH TERMINAL
G 047 NA 2 way earth terminal No 1.65 E G 43
G 048 NA 3 way earth terminal No 1.85 E G 44
G 049 NA 4 way earth terminal No 2.15 E G 45
SAFETY RUBBER MAT
G 050 NA 6.5mm thick safety rubber mat laid on m2 38.00 E G 46
floor of switchroom
JUMPER CABLE
* PVC/PVC jumper cable of the following
size between main switchboard and
underground cable's termination *(051 055)
G 051 NA 2 x 6mm2 with 6mm2 PVC Earth Cable m 4.45 E G 47
G 052 NA 2 x 10mm2 with 10mm2 PVC Earth Cable m 5.95 E G 48
G 053 NA 2 x 16mm2 with 16mm2 PVC Earth Cable m 6.60 E G 49
G 054 NA 2 x 25mm2 with 16mm2 PVC Earth Cable m 8.55 E G 50
G 055 NA 2 x 50mm2 with 25mm2 PVC Earth Cable m 10.85 E G 51
H. INDOOR LUMINAIRE/LIGHT FITTING
REMOVAL OF EXISTING LUMINAIRE
H 001 NA Remove existing ceiling, column or wall No. 5.00 E H 1
mounted luminaire including reinstatement
and disposal off site (New luminaire to be
measured separately)
ID : KMC/iy/ElecWorks (FY2012).xls (20) (21.10.2011) (May/147-3)
SOR Page 21
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
MOUNTING CHANNEL FLUORESCENT
LUMINAIRE
(Removal of existing luminaire to be
measured seperately)
* The following mounting channel
fluorescent luminaire in powder coated
finish complete with low-loss ballast
(max 6.5W loss), capacitor
and warmwhite or daylight tube
(Davis, Simlite, Philips, Eurotec) *(002 016)
H 002 NA 1 x 18W or 1 x 36W No. 18.20 E H 2
H 003 NA 1 x 18W or 1 x 36W with EMA approved No. 35.45 E H 3
electronic ballast (Osram, Vossloh
Schwabe, Tridonic-Atco, Philips, Helvar)
in-lieu of low loss ballast and capacitor
H 004 NA 2 x 18W No. 30.00 E H 4
H 005 NA 2 x 36W No. 33.10 E H 5
H 006 NA 1 x 18W with clear acrylic prismatic No. 26.00 E H 6
diffuser
H 007 NA 2 x 18W with clear acrylic prismatic No. 33.00 E H 7
diffuser
H 008 NA 1 x 36W with clear acrylic prismatic No. 27.50 E H 8
diffuser
H 009 NA 2 x 36W with clear acrylic prismatic No. 36.10 E H 9
diffuser
H 010 NA 1 x 18W with metal reflector No. 26.50 E H 10
H 011 NA 1 x 36W with metal reflector No. 28.00 E H 11
H 012 NA 2 x 36W with metal reflector No. 37.00 E H 12
H 013 NA 1 x 18W or 1 x 36W with wire guard No. 34.90 E H 13
H 014 NA 1 x 18W or 1 x 36W with internal metal No. 29.70 E H 14
reflector, clear acrylic prismatic diffuser
and ABS end cap
H 015 NA 1 x 18W with internal metal reflector, No. 42.00 E H 15
clear acrylic prismatic diffuser, ABS
end cap and approved electronic
ballast (Osram, Vossloh Schwabe,
Triolonic Atco, Philips, Helvar) in-lieu of the
low lost ballast)
H 016 NA 1 x 36W with internal metal reflector, No. 46.00 E H 16
clear acrylic prismatic diffuser, ABS
end cap and approved electronic
ballast (Osram, Vossloh Schwabe,
Triolonic Atco, Ultro, Helvar) in-lieu of the
low lost ballast
ID : KMC/iy/ElecWorks (FY2012).xls (21) (21.10.2011) (May/147-3)
SOR Page 22
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
* The following surface mounted
fluorescent luminaire with diffuser, low
loss ballast, warm white or day light tube
(ITT-Reiss, Siemens 5LG225, Disalens
602, Thorlux Jubilee, Thorn Diffuserpack,
Philips GBS314/TCS114) *(017 020)
H 017 NA 1 x 18W No. 40.00 E H 17
H 018 NA 2 x 18W No. 58.00 E H 18
H 019 NA 1 x 36W No. 45.00 E H 19
H 020 NA 2 x 36W No. 70.00 E H 20
WEATHERPROOF FLUORESCENT
LIGHT
(Removal of existing luminaire to be
measured seperately)
* The following weatherproof IP65
fluorescent luminaire with low-loss ballast
(max 6.5W loss), capacitor, polycarbonate
diffuser, warmwhite or daylight tube and
plastic or stainless steel clip for the
following :-
(Thorlux, Simlite, Philips, Woolite,
Eurolite) *(021 023)
H 021 NA 1 x 18W No. 51.40 E H 21
H 022 NA 1 x 36W No. 60.30 E H 22
H 023 NA 2 x 36W No. 89.30 E H 23
* The following weatherproof fluorescent
fitting IP65, with low-loss ballast (max
6.5W loss), warm white or daylight tube
(Thorn LUES, ITT-Reiss, Disano Hydro
971) *(024 027)
H 024 1 x 18W No. 90.00 E H 24
H 025 NA 2 x 18W No. 120.00 E H 25
H 026 NA 1 x 36W No. 110.00 E H 26
H 027 NA 2 x 36W No. 135.00 E H 27
ID : KMC/iy/ElecWorks (FY2012).xls (22) (21.10.2011) (May/147-3)
SOR Page 23
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
RECESSED LIGHT
(Removal of existing luminaire to be
measured sperately)
* Recessed T-bar mounted hinged frame
fluorescent fitting with K12 / K15
prismatics diffuser or glossy mirror louvre
matt ripped cross blade, double parabolic
glossy mirror louvre, with low-lost ballast
(max 6.5W loss), capacitor and
warmwhite/daylight tube
(Simlite, Trimex, Davis, Woolite) *(028 036)
H 028 NA 1 x 36W (300mm x 1200mm) No. 83.20 E H 28
H 029 NA 2 x 36W (300mm x 1200mm) No. 94.20 E H 29
H 030 NA 2 x 18W (300mm x 600mm) No. 79.50 E H 30
H 031 NA 2 x 18W (600mm x 600mm) No. 82.50 E H 31
H 032 NA 3 x 18W (600mm x 600mm) No. 99.50 E H 32
H 033 NA 4 x 18W (600mm x 600mm) No. 115.20 E H 33
H 034 NA 2 x 36W (600mm x 1200mm) No. 118.50 E H 34
H 035 NA 3 x 36W (600mm x 1200mm) No. 137.20 E H 35
H 036 NA 4 x 36W (600mm x 1200mm) No. 158.80 E H 36
H 037 "THORLUX" RADIANCE 2 x 36W Cat 1 No. 380.00 E H 37
recessed mounted fluorescent luminaire
H 038 "THORLUX" RADIANCE 4 x 18W Cat 1 No. 390.00 E H 38
recessed mounted fluorescent luminaire
H 039 NA Extra over item H28 to H38 for using No. 16.00 E H 39
each no. of electronic ballast in-lieu
of low-loss ballast (Osram, Vossloh-
Schwabe, Tridonic-Atco, Helvar, Ultro or
other approved)
H 040 "ARCLUCE" ORION 240, 2990-10, No. 98.00 E H 40
recessed downlight with 4mm frosted
glass protector and 18W lamp
ID : KMC/iy/ElecWorks (FY2012).xls (23) (21.10.2011) (May/147-3)
SOR Page 24
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 041 NA "DIL-CIKO" 17 recessed downlight ring No. 105.75 E H 41
diameter 185mm with 13W PLC lamp
H 042 NA "DUTCH-LITE" KL 7943 recessed No. 137.75 E H 42
downlight with 2 x 13W PL lamps ring
diameter 225mm & reflector
H 043 NA "EUROTEC" RAPID 214-83NO 2 x 18W No. 65.00 E H 43
PLC recessed downlight with metallized
polycarbonate reflector, fresnel lens and
polycarbonate diffuser IP44
H 044 ILLIS IL-15001D recessed downlight c/w die No. 98.00 E H 264
cast frame with aluminium reflector, diffuser
glass, 1 x PLC 18W compact fluorescent
lamp, control gear and all accessories
H 045 "ILLUMA" D80 recessed downlight with No. 140.00 E H 44
D842 fresnel lens, 50W lamp and remote
transformer
H 046 "INDALUX" IZS-A/S floodlight with 70W/ No. 480.00 E H 289
150W metal halide lamp (IP66)
H 047 Liedo OD-3712 square recessed No. 290.00 E H 290
downlight c/w integral gear &
1x18W/26W compact fluorescent lamp.
Made of quality sheet steel, stove-
enamelled in white (IP20)
H 048 "INTERLUX" SS87213 recessed downlight No. 75.00 E H 47
silver reflector and protection glass
with 2 x PLC 13W lamp
ID : KMC/iy/ElecWorks (FY2012).xls (24) (21.10.2011) (May/147-3)
SOR Page 25
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 049 NA "MARCIO" (37226 & 00642) recessed No. 200.00 E H 48
downlight with die-cast aluminium ring,
polished aluminium reflector, sand-blasted
glass diffuser and 2 x 18W PLC lamps
H 050 "MAXRAY" MD2668-01 recessed wall No. 130.00 E H 49
washer downlight with aluminium reflector
and 18W PLC lamp
H 051 "MAXRAY" MX8282-01 recessed No. 95.00 E H 50
downlight with anti-glare white cone with
18W PLC lamp
H 052 NA Recessed round or square flush mounted/ No. 45.00 E H 51
eyeball halogen downlight in white, black
or brass finish with remote transformer
and lamp
H 053 "Thorn" CDHL218S 130mm high x 240mm No. 138.00 E H 265
diameter compact 4L 18W twin lamp
fluorescent recessd downlight c/w specular
polish silver anodised aluminium reflector &
metal body
H 054 Arcluce Mira 165 2663 1xPLC18W No. 130.00 E H 276
recessed downlight c/w die cast
aluminium body, polished aluminium
reflector, integral magnetci control gear
and PLC18W tube IP43
H 055 DELETED
H 056 Arcluce Mira 165 2668 2xPLC18W No. 160.00 E H 277
recessed downlight c/w die cast
aluminium body, polished aluminium
reflector, integral magnetci control gear
and PLC18W tube IP43
H 057 LUMENAX MAX-1S surface mounted No. 85.00 E H 286
downlight c/w anodized aluminium
reflector and integral control gear and
1 x PLC 13W / 1 x PLC 18W lamp (IP20)
ID : KMC/iy/ElecWorks (FY2012).xls (25) (21.10.2011) (May/147-3)
SOR Page 26
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 058 LUMENAX MAX BLISS-2 recessed No. 78.00 E H 287
mounted downlight, white trim,
diamond faceted and orange peel
patterned anodized aluminium
reflector, integral control gear and
2 x PLC 13W / 2 x PLC 18W lamp
H 059 LUMENAX DEEP 11 recessed downlight No. 68.00 E H 288
c.w pressed steel ceiling trim with UV
tolerance off-white powder coated, sand
blasted aluminium reflector, integral
control gear and 1 x PLC 13W /
1 x PLC 18W lamp
H 060 "Lucent" HS6182H recessed downlight with No. 55.00 E H 312
silver aluminium frosted reflector and
1 X 18W/2 X 13W PLC lamp, ballast and
mounting accessories.
H 061 "Lucent" HS6182H SQ recessed downlight No. 55.00 E H 313
with silver aluminium frosted reflector and
1 X 18W/2 X 13W PLC lamp, ballast and
mounting accessories.
H 062 "Lucent" DL915a recessed downlight with No. 40.00 E H 314
silver aluminium reflector and 1 X 18W
PLC lamp, ballast and mounting
accessories
H 063 "Lampesia" DLL113 recessed downlight No. 45.00 E H 315
with silver aluminium reflector and 1 X 13W
PLC lamp, ballast and mounting
accessories
H 064 "Lampesia" DLL60526 recessed downlight No. 85.00 E H 316
with silver aluminium diamond reflector and
2 X 26W PLC lamp, ballast and mounting
accessories
H 065 "Lucent" HS8671 recessed downlight in No. 120.00 E H 317
cast aluminium with PMMA diffuser and
silver reflector c/w 3 X 1W high output
LED lamp with driver and safety pin,
mounting accessories
EMERGENCY / EXIT LIGHT
(Removal of existing luminaire to be
measured seperately)
EXIT LIGHT
* Emergency "Exit" light, recessed, wall or
ceiling mounted including Nickel Cadmium
battery pack and PSB Batch Test Sticker
(Maxspid, PNE, Denko, Simlite,
Econlite) *(066 068)
H 066 Single or Double-sided box type with 8W No. 83.30 E H 52
fluorescent tube
ID : KMC/iy/ElecWorks (FY2012).xls (26) (21.10.2011) (May/147-3)
SOR Page 27
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 067 NA LED Emergency "Exit" light No. 130.00 E H 53
Double-sided slim type
H 068 LED Emergency "Exit" light No. 115.00 E H 54
Single-sided slim type
EMERGENCY BULKHEAD LIGHT
* Emergency bulkhead light fitting
(weatherproof of non-weatherproof) with
2-hour nickel cadmium battery pack
(Simlite, Econlite, Maxspid, PNE,
Samcom) *(069 071)
H 069 NA 1 x 8W tube No. 101.80 E H 55
H 070 NA 2 x 8W tube No. 116.40 E H 56
H 071 NA 1 x 10W tube No. 110.00 E H 57
EMERGENCY BATTEN LIGHT
* Emergency fluorescent batten light fitting
(weatherproof or non-weatherproof)
complete with low-loss ballast and nickel
cadmium power pack module
(Simlite, Econlite, Maxspid) *(072 073)
H 072 NA 1 x 18W No. 109.90 E H 58
H 073 NA 1 x 36W No. 114.90 E H 59
SECURITY LIGHT
H 074 Recessed self contained UFO emergency No. 116.40 E H 60
lighting with 1 x 10W halogen lamp and 2
hour battery pack
(Maxspid, Simlite, Econlite, PNE)
H 075 NA "PHILIPS" FGC Security lighting including No. 129.60 E H 61
PL 9W/11W lamp
POWER PACK FOR EMERGENCY /
EXIT LIGHT
H 076 2-hour nickel cadmium power pack No. 71.80 E H 62
for 1 x 8W or 2 x 8W or 1 x 10W
emergency bulkhead/exit light
(Simlite, Econlite, Maxspid, PNE,
Samcom)
H 077 NA Nickel cadmium power pack for 18W to No. 92.15 E H 63
36W fluorescent fitting
H 078 NA 2-hour nickel cadmium power pack for No. 72.60 E H 64
PL/PLC lamp
ID : KMC/iy/ElecWorks (FY2012).xls (27) (21.10.2011) (May/147-3)
SOR Page 28
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 079 NA Nickel cadmium battery 2.4v 4.5AH No. 15.00 E H 65
(2 cells) for power pack
H 080 NA Nickel cadmium battery 6v 4AH No. 37.50 E H 66
(5 cells) for power pack
H 081 NA Control gear (charger) for power pack No. 45.00 E H 67
(Simlite, Econlite, Maxspid, PNE,
Samcom)
H 082 NA 2-hour 5W Halogen Emergency Battery No. 75.20 E H 266
pack c/w Ni-cad battery
AIRCRAFT NAVIGATION/OBSTRUCTION
LIGHTS
(Removal of existing luminaire to be
measured seperately)
H 083 "BTI" L860 Series low Intensity red LEDs No. 1,800.00 E H 68
Obstruction Light
H 084 "FABRIKANT" 8003 twin obstruction light, Set 1,164.00 E H 69
lighting control box and change over relay
with bracket and 42mm dia. hot dipped
galvanised steel pipe mounted on roof
deck and secured by 3 Nos. stainless
steel cable support
H 085 "HONEYWELL" H&P OB20 Single No. 320.00 E H 70
Obstruction Light with red lens cover
and lamp
H 086 NA "HONEYWELL" H&P OB22 Twin No. 880.00 E H 71
Obstruction Lights with change over
relay and lamps
H 087 NA "HUBBELL" navigation obstruction light No. 700.35 E H 72
cat no. BYMB-36002-AHQ with 2 x
7AP53-R, red frenel lens, transfer relay,
2 x 100W lamp and mounted on
navigation obstruction lightmast
H 088 "THORN" F21 Single Obstruction Light No. 280.00 E H 73
with red lens cover and lamp
H 089 "THORN" F22 Twin Obstruction Light with No. 780.00 E H 74
change over relay and lamps
H 090 "THORN" OBSTA STI Omni-directional No. 1,050.00 E H 75
red low intensity obstruction light with
neon discharge tube (Photometry : more
than 10cd)
H 091 "THORN" OBSTA HI-STI Omni-directional No. 1,800.00 E H 76
red low intensity obstruction light with
neon discharge tube (Photometry : more
than 32 cd)
ID : KMC/iy/ElecWorks (FY2012).xls (28) (21.10.2011) (May/147-3)
SOR Page 29
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 092 NA "WE-EF" 308-E2-100 Twin obstruction Set 1,344.00 E H 77
light with 8000hr Claude Krypton lamps,
lighting control box, change over relay,
brackets and 42mm dia. hot dipped
galvanised steel pipe mounted on roof
deck and secured by 3 nos. stainless
steel cable support
HIGH AND LOW BAY LIGHTS
(Removal of existing luminaire to be
measured seperately)
* Highbay light fitting - recessed,
suspended or ceiling mounted (Removal
of existing luminaire to be measured
seperately) (Thorn Hipak 2, Philips SDK/
HDK, Thorlux Combo, Siemens HS50,
Siteco Stylo) *(093 098)
H 093 NA 250 - 400W Mercury, Open No. 305.00 E H 78
H 094 NA 250 - 400W Mercury, Enclosed IP54 No. 380.00 E H 79
H 095 NA 250 - 400W Mercury, Prismatic No. 426.00 E H 80
H 096 NA 250 - 400W SON/MBI, Open No. 315.00 E H 81
H 097 NA 250 - 400W SON/MBI, Enclosed IP54 No. 410.00 E H 82
H 098 250 - 400W SON/MBI, Prismatic No. 438.00 E H 83
* Lowbay light fitting - recessed,
suspended or ceiling mounted (Thorn
Hipak 2, Thorlux Compact 3, Compact 65,
Siteco or other approved) *(099 102)
H 099 NA 250 - 400W Mercury, Open No. 280.00 E H 84
H 100 NA 250 - 400W Mercury, lens, louvre or wire No. 380.00 E H 85
guard
H 101 NA 250 - 400W SON/MBI, Open No. 420.00 E H 86
H 102 NA 250 - 400W SON/MBI, lens, louvre or wire No. 480.00 E H 87
guard
BRANDED LUMINAIRE
(Removal of existing luminaire to be
measured separately)
* The following luminaire including
control gear, low loss ballast, connecting
wiring, mounting bracket and other
accessories *(103 308)
H 103 NA "AEC" 2502/BK/118 wall mounted light No. 172.50 E H 267
fitting IP54 c/w PLC18W EC Ballast, G24D
PLC lamholder & etc
ID : KMC/iy/ElecWorks (FY2012).xls (29) (21.10.2011) (May/147-3)
SOR Page 30
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 104 "AEROLITE" GAMMA 1 x 18W fluorescent No. 68.70 E H 88
luminaire with HF Electronic ballast and
daylight/warm white tube
H 105 "AEROLITE" GAMMA 1 x 36W fluorescent No. 80.20 E H 89
luminaire with HF Electronic ballast and
daylight/warm white tube
H 106 "ARCLUCE" MONOS ceiling mounted No. 100.90 E H 90
luminaire with 18W fluorescent tube,
body in extruded aluminium and reeded
clear high impact acrylic diffuser
H 107 "ARCLUCE" MONOS ceiling mounted No. 134.00 E H 91
luminaire with 36W fluorescent tube,
body in extruded aluminium and reeded
clear high impact acrylic diffuser
H 108 "ARCLUCE" MONOS 1021 with 36W No. 135.80 E H 92
fluorescent tube (IP40) oval-shaped
extruded aluminium subular system and
reeded prismatic diffuser
H 109 Arcluce Square 3532 1x70/50 wall No. 820.00 E H 278
mounted fitting c/w die cast aluminium
body, temper glass diffuser, extruded
aluminium control gear box with Vossloh
Schwabe Control gear
and Nav-T 70W super sodium lamp IP55
H 110 Arcluce Square 3532 1x70/50 wall No. 770.00 E H 304
mounted fitting c/w die cast aluminium
body, temper glass diffuser, extruded
aluminium control gear box with
vossloh schwabe control gear and
60W/65W spiral cool white/daylight
compact fluorescent lamp
H 111 NA "ARIES" CLASSIC MOD 683 wall No. 93.85 E H 93
mounted luminaire with 13W PLC/18W
PLC lamp, die cast aluminium body and
acrylic diffuser
H 112 NA "ARIES" CLASSIC MOD 684 wall No. 85.85 E H 94
mounted luminaire with die-cast
aluminium structure and polyester powder
coated paint and 13W/18W PLC/SC 18W
lamp
H 113 "ASTRIUM" TV210 decorative semi- No. 280.00 E H 95
recessed wall luminaire in cast aluminium
with frosted polycarbonate diffuser and
2 x 10W or 2 x 7W PLC lamps
H 114 NA "BEGA" 2489 wall mounted luminaire with No. 221.40 E H 96
13W PLC lamp and die-cast aluminium
body
H 115 NA "BEGA" 2926 recessed wall mounted No. 221.40 E H 97
luminaire with 183W PLC lamp, aluminium
alloy and stainless steel body
H 116 NA "BEGA" 2491 wall light (IP45) with 26W No. 368.00 E H 98
PLC lamp
ID : KMC/iy/ElecWorks (FY2012).xls (30) (21.10.2011) (May/147-3)
SOR Page 31
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 117 NA "BERGNER & WEISER" art no. No. 141.10 E H 99
7151.1(W) wall/ceiling mounted luminaire
wtih die-cast aluminium body,
polycarbonate diffuser and 13W TC-D lamp
H 118 NA "BERGNER & WEISER" art no. No. 168.15 E H 100
7151.1M(W) wall/ceiling mounted
luminaire with die-cast aluminium body,
polycarbonate diffuser and 13W TC-D
lamp
H 119 "BOLUCE" ASTRA 9323, wall mounted No. 146.45 E H 101
luminaire with 2 x 9W PL lamps
H 120 "BOLUCE" GAMMA 1093, recessed wall No. 134.85 E H 102
mounted luminaire with grille and 9W PL
lamp
H 121 "COSMO" C 0380/218 cast aluminium No. 160.05 E H 103
ceiling mounted luminaire with opal
polycarbonate diffuser with 2 x PLC
18W lamps
H 122 "DAIKO" DWP 18642 updown wall light in No. 260.00 E H 104
cast aluminium with diffuser with 18W
PLC lamp
H 123 "DAIKO" DWP-18651 wall light in cast No. 295.00 E H 105
aluminium with diffuser with 13W PLC
lamp
H 124 "Lucent" 8077 surface mounted downlight in No. 450.00 E H 318
cast aluminium with frosted safety glass
diffuser and silver aluminium reflector, 2 X
18W PLC lamp and ballast
"Lucent" 8098 surface mounted downlight in No. 520.00 E H 319
H 125 cast aluminium with frosted safety glass
diffuser and silver aluminium reflector, 70W
metal halide lamp and integral control gear
H 126 NA "DEFA" NEPTUNE 003AS 121201 No. 162.90 E H 106
wall/ceiling mounted luminaire with 26W
PLC lamp and polycarbonate diffuser
H 127 NA "DAIKO" diffuser luminaire (WSLD No. 35.80 E H 107
Series) with prismatic diffuser, end caps
and 36W tube
ID : KMC/iy/ElecWorks (FY2012).xls (31) (21.10.2011) (May/147-3)
SOR Page 32
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 128 NA "DIL" ROLLER 85 ceiling-mounted No. 220.00 E H 110
separate tubular luminaire comprising
extruded aluminium tubular body with
36W fluorescent lamp, polycarbonate
diffuser, ceiling bracket, terminal flange
and flat plug
H 129 "Ingo" Aste decorative wall light in aluminium No. 1,025.00 E H 324
with frosted tempered glass diffuser and 80W
mercury super deluxe lamp and integral control gear
H 130 NA "DISANO" Model 2100 KENDO No. 152.30 E H 111
fluorescent luminaire with 36W
fluorescent lamp and end cap
H 131 NA "DISANO" Model 2100 KENDO No. 135.80 E H 112
fluorescent luminaire with 18W
fluorescent lamp and cap
H 132 DOMKNICO NERI 1002.000+GP30 No. 285.00 E H 268
decorative pedestral luminaire in cast iron
with opal PMMA globe c/w ELN 15W
energy saving lamp and all accessories
(Grey)
H 133 NA "DUTCH-LITE" 6301 decorative wall No. 630.00 E H 113
luminaire in cast aluminium with vandal
resistant glass diffuser and 125W metal
halide mercury lamp
H 134 NA "EUROTEC" 220 561 1 x 150W metal No. 550.00 E H 114
halide down wall light body made of
compact and sturdy corrosion resistant
die-cast light alloy, safety tempered
glass lens, with up-throw narrow beam
and asymmetrical wide beam
down-throw, IP 65
H 135 NA "EUROTEC" BLOCK 1 x 18W PLC No. 150.00 E H 115
recessed wall light with die-cast
aluminium housing, stainless steel front
panel, and UV stabilized opal
polycarbonate diffuser, IP55
H 136 NA "EUROTEC" CIN-ECO/FL26 1 x 26W PLC No. 185.00 E H 116
wall mounted up/down light with UV-
stabilized polycarbonate prismatic diffuser,
super pure aluminium reflector & integral
magnetic ballast
H 137 NA "EUROTEC" CING/MINISOSIA Opal 1 x No. 485.00 E H 117
150W metal halide suspended light
die-cast alloy anodised extruded
aluminium housing with extruded
aluminium reflector, opal polycarbonate
diffuser with colour filter attachment
H 138 NA DELETED E H 118
ID : KMC/iy/ElecWorks (FY2012).xls (32) (21.10.2011) (May/147-3)
SOR Page 33
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 139 NA "EUROTEC" T0560S 2 x 18W PLC No. 165.00 E H 119
surface mounted with white pressed
steel housing, vacuum metallized silver
anodized reflector & integral
electromagnetic ballast
H 140 "FABRIKANT" 1014 recessed wall mounted No. 177.00 E H 120
luminaire (IP54) with 18W PLC Lamp
H 141 NA "FISCHER" SAPPHIRE wall/ceiling No. 130.00 E H 121
mounted luminaire with 2 x 18W PLC
lamps
H 142 T5 surface mounted fluorescent fitting No. 77.00 E H 122
complete with 1 x 14W T5 warm white/
coolwhite/daylight fluorescent tube
and electronic ballast (OSRAM, Philip, Helvar,
Vossoloh Schwabe) (Simlite, MIE, Product
Design, Davis)
H 143 T5 surface mounted fluorescent fitting No. 94.00 E H 123
complete with 1 x 28W T5
coolwhite/daylight fluorescent tube
and electronic ballast (OSRAM, Philip, Helvar,
Vossoloh Schwabe) (Simlite, MIE, Product
Design, Davis)
H 144 "GHIDINI" OVALLA Cat. No. BL 1101.1 No. 92.15 E H 124
wall mounted luminaire with 2 x 9W or
2 x 11W PL lamps
H 145 "GHIDINI" OVALLA 1103 wall mounted No. 101.85 E H 125
luminaire with die-cast aluminium body
and opal diffuser, side mounting and
2 x 9W or 2 x 11W PL lamps
H 146 "GHIDINI" OVALLA 1104 wall mounted No. 103.90 E H 126
luminaire with die-cast aluminium body
opal diffuser, end mounting and 2 x 9W
or 2 x 11W PL lamps
H 147 NA "GOCCIA" 2898 wall light with 2 x 9W or No. 87.30 E H 127
2 x 11W PL lamps
ID : KMC/iy/ElecWorks (FY2012).xls (33) (21.10.2011) (May/147-3)
SOR Page 34
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 148 "GOCCIA" ILLUMINAZIONE TRIANGOLO No. 156.05 E H 128
wall mounted luminaire with 70W SON
or 70W CDM coolwhite or 70W metal
halide lamp polycarbonate
body and vandal proof diffuser
H 149 "GOCCIA" ILLUMINAZIONE TRIANGOLO No. 106.05 E H 311
wall mounted luminaire with 60W or
65W coolwhite/daylight spiral compact
flourescent lamp polycarbonate body and
vandal proof diffuser
H 150 "GOCCIA" TRIANGOLO 4322 wall/ceiling No. 135.40 E H 129
luminaire with 2 x 11W PL lamps and
vandal-proof acrylic diffuser
H 151 "GOCCIA" TRIANGOLO 4346 wall/ceiling No. 146.90 E H 130
luminaire with 2 x 18W PL lamps and
vandal-proof acrylic diffuser
H 152 "GOCCIA" TRIANGOLO 4380 wall/ceiling No. 180.00 E H 131
luminaire with 70W CDM cool white or 70W
metal halide lamp
H 153 "GOCCIA" TRIANGOLO 4380 wall/ceiling No. 130.00 E H 305
luminaire with 60W or 65W cool white /
daylight spiral compact fluorescent lamp
H 154 NA "IGUZZINI GRID" 7058 (IP66) surface No. 140.00 E H 132
mounted fitting in die cast aluminium
frame and frosted polycarbonate diffuser
with 2 x 11W or 2 x 18W PLC lamps
H 155 "ILMAS" STUDIO LINE 1 x 18W No. 63.50 E H 133
fluorescent luminaire with HF Electronic
ballast and daylight / warm white tube
H 156 "ILMAS" STUDIO LINE 1 x 36W No. 75.00 E H 134
fluorescent luminaire with HF Electronic
ballast and daylight / warm white tube
H 157 "REISS" Square light SQL 300/211 No. 106.70 E H 140
ceiling mounted luminaires with 2 x 11W
PL lamps and polycarbonate diffuser
H 158 "JASLITE" AL666046 surface mounted No. 291.00 E H 141
outdoor luminaire, IP43, vandal and
corrosion resistant die-cast aluminium
powder coated body, polycarbonate
diffuser and 18W compact
fluorescent energy saving lamp
ID : KMC/iy/ElecWorks (FY2012).xls (34) (21.10.2011) (May/147-3)
SOR Page 35
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 159 "KL LICHT" 6156SO.118 1 x 18W PLC, No. 480.00 E H 142
wall mounted luminaire in die-cast
aluminium body, with clear, frosted or
opal UV stabilised polycarbonate
diffuser and polycarbonate reflector,
IP44
H 160 "KL LICHT KEGEL-HALB" 1121, PLC wall No. 276.00 E H 143
mounted fitting with 18W PLC lamp
H 161 "KL LICHT RADIUS" 1341, PL wall No. 253.00 E H 144
mounted mounted fitting with 11W PL
lamp
H 162 "KL LICHT" ZYLINDER-QUADRO 1581 No. 980.00 E H 145
wall mounted luminaire with 70W
SON or 70W CDM cool white or 70W
metal halide lamp, body in cast aluminium
and cylindrical opal UV- stabilized
polycarbonate diffuser
H 163 "KL LICHT" ZYLINDER-QUADRO 1581 No. 930.00 E H 306
wall mounted luminaire with 60/65W
cool white/daylight spiral compact
fluoresent lamp, body in cast aluminium
and cylindrical opal UV- stabilized
polycarbonate diffuser
H 164 "KL LICHT" ZYLINDER-QUADRO 1583 No. 1,080.00 E H 146
wall mounted luminaire with 70W
SON or 70W CDM cool white or 70W
metal halide lamp, body in cast aluminium
with anti-glare louvres and built in cylindrical
clear UV-stabilized polycarbonate diffuser
H 165 "KL LICHT" ZYLINDER-QUADRO 1583 No. 1,030.00 E H 307
wall mounted luminaire with 60W/65W
coolwhite/daylight spiral compact
flourescent lamp, body in cast aluminium
with anti-glare louvres and built in cylindrical
clear UV-stabilized polycarbonate diffuser
H 166 "KL LICHT" TRAPEZ 5007 wall mounted No. 687.75 E H 147
luminaire with 70W SON or 70W CDM cool
white or 70W metal halide lamp, body in
cast aluminium and frosted UV-stabilized
polycarbonate diffuser
H 167 "KL LICHT" TRAPEZ 5007 wall mounted No. 637.00 E H 308
luminaire with 60W /65W coolwhite/daylight
spiral compact fluorescent lamp, body in
cast aluminium and frosted UV-stabilized
polycarbonate diffuser
H 168 NA "LIGHTCRAFT" AGT 146/P3-2 Telescopic Set 533.50 E H 148
with 2 lanterns and 26W PLC lamps
ID : KMC/iy/ElecWorks (FY2012).xls (35) (21.10.2011) (May/147-3)
SOR Page 36
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 169 NA "LIGHTCRAFT" AGT 146/P3-1 Telescopic Set 388.00 E H 149
with 1 lantern with 26W PLC lamp
H 170 NA "LIGHTCRAFT" AGT 180/P3-1 Telescopic Set 320.10 E H 150
lantern with 26W PLC lamp
H 171 LITE'Z Rounders 2x11 surface mounted No. 110.00 E H 279
fitting c/w die cast aluminium body,
polycarbonate diffuser, intergal magnetic
control gear and 11W tube
H 172 LITE'Z Square illum 2 x 11W PL surface No. 120.00 E H 303
mounted fitting c/w cast aluminium
alloy base and frame, PMMA diffuser,
integral magnetic control gears
H 173 LIGMAN 30252 surface mounted wall No. 225.00 E H 280
light c/w vandal and corrosion resistant
die cast aluminium alloy body, UV
stabilized opal white polycarbonate
diffuser and 1 x PLC 18W 1 x PLC 25W
lamp (IP55)
H 174 LIGMAN 30262 surface mounted wall No. 225.00 E H 281
lgiht c/w vandal and corrosion resistant
die cast aluminium alloy body, UV
stabilized opal white polycarbonate
diffuser and 1 x PLC 18W / 1 x PLC 26W
lamp (IP55)
H 175 LIGMAN 30242 surface mounted wall No. 225.00 E H 282
light c/w vandal and corrosion resistant
die cast aluminium alloy body, UV
stabilized opal white polycarbonate
diffuser and 1 x PLC 18W / 1 x PLC 26W
lamp (IP55)
LIGMAN 30074 surface mounted wall No. 225.00 E H 283
H 176 light c/w vandal and corrosion resistant
die cast aluminium alloy body, UV
stabilized opal white polycarbonate
diffuser and 1 x PLC 18W / 1 x PLC 26W
lamp (IP55)
H 177 "Lucent" 6568 surface mounted light No. 70.00 E H 325
with polycarbonate diffuser with 9W PLlamp
H 178 LUMENAX 8001 1 x 18W surface No. 83.00 E H 284
mounted wall / ceiling luminaire in
corrosion resistant extruded aluminium
housing, aluminium reflector, reeded
prismatic diffuser, gasketed end caps
with counter sunk securing screws c/w
approved HF electronic ballast and
warm shite tube (IP52)
H 179 LUMENAX 8001 1 x 36W surface No. 95.00 E H 285
mounted wall / ceiling luminaire in
corrosion resistant extruded aluminium
housing, aluminium reflector, reeded
prismatic diffuser, gasketed end caps
with counter sunk securing screws c/w
approved HF electronic ballast and
warm white tube (IP52)
ID : KMC/iy/ElecWorks (FY2012).xls (36) (21.10.2011) (May/147-3)
SOR Page 37
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 180 NA "LK" SKOT MAXI wall/ceiling mounted No. 360.00 E H 151
luminaire with 70W SON, 70W CDM
coolwhite or 70W metal halide lamp,
polycarbonate diffuser and die-cast
aluminium body
H 181 NA "LOCADI" ARTE STRIPE S2018 wall/ No. 103.90 E H 152
ceiling mounted luminaire with 18W
PLC or 26W PLC or 2 x 9W PL lamps,
die cast aluminium housing and UV
stabilised vandal proof diffuser
H 182 NA "LOCADI" ARTE STRIPE S1010 wall/ No. 95.85 E H 153
ceiling mounted luminaire with 10W PL
or 13W PLC lamp, die cast aluminium
housing and UV stabilised vandal proof
diffuser
H 183 NA "LOCADI" ARTE GRID L1018 wall/ceiling No. 103.90 E H 154
mounted luminaire with 18W PLC or 26W
PLC or 2 x 9W PL lamp, die cast
aluminium housing and UV stabilised
vandal proof diffuser
H 184 NA "LOCADI" ARTE STRIPE S2010 wall/ No. 97.80 E H 155
ceiling mounted luminaire with 10W PL or
13W PLC lamp, die cast aluminium
houseing and UV stabilised vandal proof
diffuser
H 185 NA "LOTHUS" WAGNER 106 wall mounted No. 174.15 E H 156
luminaire with 18W PLC lamp and UV
resistant polycarbonate glazing and cast
aluminium body
H 186 "LUCERNE" 502 wall mounted luminaire No. 100.95 E H 157
with 2 x 11W PL lamps, body in die-cast
aluminium and frosted UV-stabilized
polycarbonate diffuser
H 187 "LUCERNE" 502 wall mounted luminaire No. 108.95 E H 158
with 2 x 13W or 2 x 18W PLC lamps,
body in die-cast aluminium and frosted
UV-stabilized polycarbonate diffuser
H 188 NA "LUCERNE" 270-G surface mounted wall No. 87.30 E H 159
light (IP54) with 2 x 9W PL lamps
H 189 NA "LUXLITE" wall cylinder WC 150 with No. 236.40 E H 160
2 x 13W PLC lamps
ID : KMC/iy/ElecWorks (FY2012).xls (37) (21.10.2011) (May/147-3)
SOR Page 38
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 190 DELETED E H 161
H 191 "LUMENAX WAVE" 9002 or SIMLITE No. 60.00 E H 162
NBS 220 HFS 2 X 18W surface
mounted fluorescent luminaire with
white powder coated steel or aluminium
reflector, reeded ABS or metal end-cap
and cover, and daylight/warm white tube
H 192 DELETED E H 163
H 193 "LUMENAX WAVE" 9004 or SIMLITE No. 78.00 E H 164
NBS 240) 2 x 36W surface mounted
fluorescent luminaire with white powder
coated steel or aluminium, reflector,
reeded ABS or metal end-cap and
end-cover, and daylight/warm white tube
H 194 "LUMENAX WAVE" 9001 1 x 18W surface No. 44.00 E H 165
mounted fluorescent luminaire with white
powder coated steel or aluminium back
reflector, reeded ABS or metal end-cap
and end-cover, and daylight/warm white
tube
H 195 "LUMENAX WAVE" 9002 2 x 18W surface No. 100.00 E H 166
mounted fluorescent luminaire with white
powder coated steel or aluminium back
reflector, reeded ABS or metal end-cap
and cover, removable gear tray, male &
female connector, electronic ballast
(Philips, Osram, Helvar) and daylight/
warm white tube
H 196 "LUMENAX WAVE" 9003 1 x 36W surface No. 62.00 E H 167
mounted fluorescent luminaire with white
powder coated steel or aluminium back
reflector, reeded ABS or metal end-cap
and end-cover, and daylight/warm white
tube
ID : KMC/iy/ElecWorks (FY2012).xls (38) (21.10.2011) (May/147-3)
SOR Page 39
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 197 "LUMENAX WAVE" 9004 2 x 36W surface No. 115.50 E H 168
mounted fluorescent luminaire with white
powder coated steel or aluminium back
reflector, reeded ABS or metal end-cap
and cover, removable gear tray, male &
female connector, electronic ballast
(Philips, Osram, Helvar) and daylight/
warm white tube
H 198 Liedo OD-6930 surface luminaire c/w No. 320.00 E H 291
integral gear & 1x28W/35W T5 linear
fluorescent lamp. Corrosion resistant
extruded aluminium profiles with laser-
cut headers. Stove enamelled I white
(IP20)
H 199 Liedo OD-6260 surace lauminaire c/w No. 315.00 E H 292
integral gear & 2x14W/28W T5 linear
fluorescent lamps. Corrosion resistant
extruded aluminium profiles and 3mm
thick headers. Stove enamelled in
white (IP20)
H 200 Liedo OD-6253 surace lauminaire c/w No. 269.00 E H 293
integral gear & 2x14W/28W T5 linear
fluorescent lamps. Corrosion resistant
extruded aluminium profiles and 3mm
thick headers. Stove enamelled in
white (IP20)
H 201 Moonlight Vigor pro 1 x 18W compact No. 280.00 E H 294
fluorescent wall mounted luminaire c/w
corrosion resistant extruded aluminium
profile, acrylic UV stabilized diffuser
IP44
H 202 Moonlight 5343 Surface mounted No. 212.00 E H 295
luminaire c/w inegral gear and 1x18W
compact lamp. Corrosion resistant die-
cast aluminium body with stainless steel
screws, durable silicone rubber gaskets
and U.V polycarbonate diffuser (P54)
H 203 Moonlight 5353 Surface mounted No. 230.00 E H 296
luminaire c/w inegral gear and 1x18W
compact lamp. Corrosion resistant die-
cast aluminium body with stainless steel screws, durable silicone rubber gaskets
and U.V polycarbonate diffuser (P54)
H 204 Moonlight 5363 Surface mounted No. 215.00 E H 297
luminaire c/w inegral gear and 1x18W
compact lamp. Corrosion resistant die-
cast aluminium body with stainless steel
screws, durable silicone rubber gaskets
and U.V polycarbonate diffuser (P54)
ID : KMC/iy/ElecWorks (FY2012).xls (39) (21.10.2011) (May/147-3)
SOR Page 40
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 205 Moonlight 5373 Surface mounted No. 220.00 E H 298
luminaire c/w inegral gear and 1x18W
compact lamp. Corrosion resistant die-
cast aluminium body with stainless steel
screws, durable silicone rubber gaskets
and U.V polycarbonate diffuser (P54)
H 206 Moonlight 5383 Surface mounted No. 220.00 E H 299
luminaire c/w inegral gear and 1x18W
compact lamp. Corrosion resistant die-
cast aluminium body with stainless steel
screws, durable silicone rubber gaskets
and U.V polycarbonate diffuser (P54)
H 207 Moonlight 5393 Surface mounted No. 220.00 E H 300
luminaire c/w inegral gear and 1x18W
compact lamp. Corrosion resistant die-
cast aluminium body with stainless steel
screws, durable silicone rubber gaskets
and U.V polycarbonate diffuser (P54)
H 208 NA "MATSUSHITA" HS 1002 Opal diffuser No. 129.00 E H 173
with 2 x PL 9W lamps
H 209 NA "MERZ" horizontal downlight with 18W No. 68.85 E H 174
PLC lamp
H 210 NA "MEYER" 16222 wall/ceiling mounted No. 104.75 E H 175
luminaire with opalescent polycarbonate
diffuser, reflector and 13W or 18W PLC
lamp
H 211 NA "MEYER" 16322 wall mounted luminaire No. 86.00 E H 176
in black/white finishing, opalescent
polycarbonate diffuser, die-cast aluminium
housing, ballast, capacitor, mounting
bracket & 18W PLC energy saving lamp
H 212 NA "MEYER" wall mounted luminaire 16322 No. 97.85 E H 177
with opalescent white/transparent
polycarbonate diffuser, reflector
and 13W or 18W PLC lamps
H 213 NA "MODUS PET" 330 Code PN 112.9006 No. 126.10 E H 178
ceiling mounted luminaire with 2 x 11W
compact fluorescent lamps, die-cast
aluminium base and ring with epoxy
powder coating, hammered aluminium
reflector and sand-blasted polycarbonate
diffuser.
ID : KMC/iy/ElecWorks (FY2012).xls (40) (21.10.2011) (May/147-3)
SOR Page 41
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 214 NA "NIBA" QUASAR ceiling mounted No. 114.45 E H 179
luminaire Cat No. 3688 with opal diffuser,
frame in orange-Red, pc white base in self
extinguishing thermoplastic & external
stainless steel screws with 2D 28W
warm-white lamp
H 215 NA "NORAL" EXPO IVA wall mounted No. 494.70 E H 180
luminaire with 26W PLC lamp or 50W/
80W mercury super deluxe lamp, bracket
and acrylic diffuser
H 216 NA "NORAL" MARBELLA wall mounted No. 98.95 E H 181
luminaire with 11W PL or 13W PLC or
18W PLC or 2D 16W lamp and
polycarbonate diffuser
H 217 NA "NORAL" NORA 111F wall mounted No. 577.15 E H 182
luminaire with 13W or 18W PLC lamp or
50W mercury super deluxe lamp and
polycarbonate diffuser
H 218 NA "NORAL" PORTO wall mounted No. 98.95 E H 183
luminaire with 9W PL or 13W PLC or 18W
PLC or 2D 16W lamp and polycarbonate
diffuser
H 219 NA "NORAL" ROULETTE II A/F wall mounted No. 254.15 E H 184
luminaire in standard black or white finish
with smoke lens made of UV-stabilised
polycarbonate and 13W SL lamp
H 220 NA "NORAL" SAINT TROPEZ wall/ceiling No. 98.95 E H 185
mounted luminaire with 11W PL or 13W
PLC or 18W PLC or 2D 16W lamp and
polycarbonate diffuser
H 221 NA "NORAL" SANTA CRUZ/MILANO wall/ No. 119.30 E H 186
ceiling mounted luminaire with frosted
polycarbonate diffuser, silver reflector and
38W warmwhite or daylight Lamp
H 222 NA "NORAL" SEVILLA A/F wall mounted No. 342.40 E H 187
luminaire with 13W or 18W or 26W PLC
lamp and polycarbonate diffuser
H 223 NA "NORAL" TORINO A/F wall mounted No. 254.15 E H 188
luminaire in standard black or white finish
with smoke lens made of UV-stabilised
polycarbonate and 9W SL lamp
H 224 NA "NORAL" TRUMPET F wall mounted No. 244.45 E H 189
luminaire with 9W PL lamp, bracket
and polycarbonate diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (41) (21.10.2011) (May/147-3)
SOR Page 42
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 225 "NOVALUX" Type 5514 decorative No. 103.90 E H 190
wall mounted luminaire of thermosetting
body with frosted diffuser and 18W PLC
lamp
H 226 "NOVALUX" Type 5512 decorative No. 103.90 E H 191
wall mounted luminaire of thermosetting
body with frosted diffuser and 2 x 11W PL
lamps
H 227 "NOVALUX" Type 5510 decorative No. 103.90 E H 192
wall mounted luminaire of thermosetting
body with frosted diffuser and 2 x 18W
PLC lamp
H 228 NA "OSRAM" Softlite 18W luminaires lamp No. 180.00 E H 193
H 229 NA "PHILIPS" TCS 058/118 fluorescent No. 69.85 E H 194
luminaire with 18W TLD lamp, in HPF
switch start circuitry and opal diffuser
H 230 NA "PHILIPS" TCS 058/236 fluorescent No. 120.30 E H 195
luminaire with 2 x 36W TLD lamp HPF
switch start circuitry and opal diffuser
H 231 NA "PHILIPS" KOMBI PLB 211 wall mounted No. 148.40 E H 196
vandal-resistant luminaire with 2 x 11W
PL lamps
H 232 NA "PLANET COSMO" CO380/213 decorative No. 90.00 E H 197
ceiling /wall mounted luminaire in cast
aluminium with opal diffuser and 2 x
13W PLC lamp
H 233 NA "PLATEK" LEIPZIG O5 wall mounted light No. 577.15 E H 198
fitting, body made of phosph-chromate
aluminium coated with polyester paint,
UV-stabilised polycarbonate lens and
11W PL or 13/18W lamp
H 234 NA "PLEAID" 175-76122 recessed downlight No. 165.00 E H 199
with matt aluminium reflector and
decorative glass with 18W PLC lamp
(without cone)
H 235 NA "POLOMITI" Square ceiling luminaire with No. 110.60 E H 200
2 x 9W PL or 2 x 11W PL lamps
H 236 "PRISMA" PIUS OVALE 350 spilt wall No. 204.30 E H 201
mounted luminaire with die-cast aluminium
housing and UV stabilized polycarbonate
diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (42) (21.10.2011) (May/147-3)
SOR Page 43
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 237 NA "PROLUX" 1080.20 wall mounted fitting No. 104.75 E H 202
with 15W ELN compact fluorescent lamp,
200mm clear globe and wall bracket
H 238 NA "PROLUX" TX118 surface mounted tubular No. 160.05 E H 203
light fittings with 18W fluorescent
lamp and prismatic diffuser
H 239 PULSAR 62030 ceiling mounted luminaire No. 98.00 E H 204
with die cast body 2 x 11W PL lamps
H 240 NA "RAAK" recessed downlight R14-0003 No. 276.45 E H 205
ring diameter 190mm with 18W or 21W
PLC lamp
H 241 "REISS" KK118HF, 1 x 18W weatherproof No. 70.50 E H 269
mounting channel fluorescent fitting IP65
with Osram QTP elctronic ballast, plug-in
connector and Osram L18/31-830 warm
white tube
H 242 "REISS" KK136HF, 1 x 36W weatherproof No. 75.10 E H 270
mounting channel fluorescent fitting IP65
with Osram QTP elctronic ballast, plug-in
connector and Osram L36/31-830 warm
white tube
H 243 NA "ROYCE THOMSON" RTE/PS/KT No. 73.70 E H 206
photocell Kit
H 244 Royal Botania Luce-Fer wall mounted No. 390.00 E H 301
lantern c/w 1x7-11W compact
fluorescent lamp. Body is made of
superior natural materials : zinc alloyt
cast solid brass (IP55)
H 245 Royal Botania Omega wall mounted No. 300.00 E H 302
up-down luminaire c/w 1x20W/35W
Halogen lamp. Body is made of
superior natural material : stainless
steel (IP55)
H 246 NA "SELUX" SX 432-17-2 wall mounted No. 1,010.00 E H 207
luminaire with 50W/80W/125W mercury
super deluxe lamp/26W PLC lamp and
polycarbonate diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (43) (21.10.2011) (May/147-3)
SOR Page 44
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 247 NA "SELUX" Sx 472-20-2 Wall Mounted No. 1,388.00 E H 208
Luminaire in Black FInishing with clear
cylindrical polycarbonate diffuser clear
mirror louvre, cast aluminium filter &
80W HME mecury super deluxe lamp
H 248 "SIEMENS" MONSUN Damp-proof surface No. 68.00 E H 211
mounted luminaire with 36W lamp
H 249 "SIEMENS" MONSUN Damp-proof surface No. 95.00 E H 212
mounted luminaire with 2 x 36W lamp
H 250 "SIEMENS HQL" Super Delux wall No. 250.00 E H 213
mounted fitting custodian with GRP body
injection moulded UV-stabilised
polycarbonate prismatic diffuser, white
sheet steel reflector and 70W CDM cool
white or 70W metal halide lamp
H 251 "SIEMENS HQL" Super Delux wall No. 200.00 E H 309
mounted fitting custodian with GRP body
injection moulded UV-stablised
polycarbonate prismatic diffuser, white
sheet steel reflector and 60W/65W
coolwhite/daylight spiral compact
fluorescent lamp
H 252 "SIMES" Model S6005 ceiling mounted No. 114.45 E H 214
luminaire with 2 x 11W PL lamps
H 253 "SIMES" Model S6008 ceiling mounted No. 119.30 E H 215
luminaire with 2D 38W lamp
H 254 "SIMES" #245 decorative weatherproof No. 85.10 E H 216
surface mounted luminaire of IP54 class 1
protection with body in die cast aluminium
and 13W PLC lamp
H 255 "SIMES" VEDO OVAL Art 6709 wall/ No. 117.95 E H 217
ceiling mounted luminaire with 18W PLC
lamp and sand-blasted polycarbonate
diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (44) (21.10.2011) (May/147-3)
SOR Page 45
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 256 "SIMES" VEDO OVAL Art 6749 wall/ No. 132.00 E H 218
ceiling mounted luminaire with 18W PLC
lamp and sand-blasted polycarbonate
diffuser
H 257 "SIMES" VEDO OVAL Art 6759 wall/ No. 139.10 E H 219
ceiling mounted luminaire with 18W PLC
lamp and sand-blasted polycarbonate
diffuser
H 258 "Tucano" 1312 surface mounted luminaire in No. 140.00 E H 321
cast aluminium with polycarbonate shock-resistant diffuser and PLC 18W lamp
H 259 NA "SIMLITE" BS120 1 x 18W surface No. 44.00 E H 220
mounted fluorescent luminaire with
powder coated white waveform reflector
or aluminium reflector, reeded ABS or
metal end-cap and cover, removable gear
tray, male & female connector, and
daylight/warm white tube
H 260 "SIMLITE" BS120E or LUMENAX WAVE No. 60.00 E H 221
9001 1 x 18W surface mounted
fluorescent luminaire with powder coated
white waveform reflector or aluminium
reflector, reeded ABS or metal end-cap
and cover removable gear tray, male &
female connector, electronic ballast
(Philips, Osram, VS, Helvar) and daylight/
coolwhite/warm white tube
H 261 NA "SIMLITE" BS136 1 x 36W surface No. 62.00 E H 222
mounted fluorescent luminaire with
powder coated white waveform reflector,
or aluminium reflector, reeded ABS
or metal end-cap and cover removable
gear tray, male & female connector, and
daylight/coolwhite/warm white tube
H 262 "SIMLITE" BS140E or LUMENAX 9003 No. 80.50 E H 223
1 x 36W surface mounted fluorescent
luminaire with powder coated white
waveform reflector, or aluminium reflector,
reeded ABS or metal and end-cap and
cover removable gear tray, male &
female connector, electronic ballast
(Philips, Osram, VS, Helvar) warm
white tube
ID : KMC/iy/ElecWorks (FY2012).xls (45) (21.10.2011) (May/147-3)
SOR Page 46
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 263 NA "SIMLITE" SB114 T5 1 x 14W non- No. 122.25 E H 271
weatherproof batten c/w DALI T5 high
frequency ballast and Osram T5 warm
white lamp, IP20
H 264 NA "SIMLITE" SB128 T5 1 x 28W non- No. 133.75 E H 272
weatherproof batten c/w DALI T5 high
frequency ballast and Osram T5 warm
white lamp, IP20
H 265 NA "SIMLITE" SB136/M 1 x 36W mounting No. 122.25 E H 273
channel fluorescent fitting with low lost
ballast, two way plug-in connector, Osram
L36/21-840 cool white lamp and two hours
duration simlite emergency power pack
H 266 NA "SIMLITE" WP136 1 x 36W weatherproof No. 54.40 E H 274
fluorescent fitting with low lost ballast, two
way plug-in connector and Osram L36/21-
840 cool white lamp
H 267 "SUPERCLUB" CLUB/DIAMOND or No. 77.60 E H 224
LUMENAX 9003 light fitting with 2D 28
or 38W lamp & accessories
H 268 "SUPER DELTA" OVALE/G (Prisma 1702) No. 70.80 E H 225
light fitting with 2 x 9W PL lamps
H 269 NA "TERMO-LYRA" TL-MO445/11 decorative No. 110.60 E H 226
ceiling light with 11W PL Lamp
H 270 NA "TERMO" 0250/219 ceiling luminaire with No. 110.60 E H 227
diffuser with 2 x PL 9W lamps
H 271 "THORLUX" Cat No. PS 7952S No. 165.85 E H 228
Prismalette bulkheed luminaire
with 2D 38W or 28W lamp or 2 x
PL 11W lamp
H 272 "THORLUX" MERCIAN with 70W high No. 420.00 E H 229
pressure sodium lamp (MER9953) or
70W metal halide lamp (MER9954) or
high power coolwhite/daylight 60/65W
compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (46) (21.10.2011) (May/147-3)
SOR Page 47
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 273 "THORLUX" PASSLIGHT with glass cover No. 415.00 E H 230
70W high pressure sodium lamp
/or 70W metal halide lamp
H 274 "THORLUX" PASSLIGHT with glass cover No. 390.00 E H 326
and 60/65W high power coolwhite/
daylight compact fluorescent lamp
H 275 "THORLUX" PRISMATIC with glass cover No. 250.00 E H 231
and 50W mercury lamp (PR3049)
H 276 "THORLUX" PRISMALUX with glass cover No. 380.00 E H 232
and 80 or 125W mercury lamp or 50 or
70W High Pressure Soidum lamp or
70W metal halide lamp
H 277 Litz plaza mini we60 die cast aluminium pc 450.00 E H 320
wall light mount with frosted hard glass
diffuser, glossy aluminium reflector and
60W/65W high power coolwhite/daylight
compact fluorescent lamp (IP45)
H 278 "THORLUX" HU-STYLE COM indirect No. 820.00 E H 233
lighting system 2 x 55W with electronic
control gear and lamps
H 279 "Tucano" YA136-2 surface mounted wall light No. 250.00 E H 322
in cast aluminium with borax glass diffuserand reflector, 70W/ 150W Son/ metal halide lamp, 80W/ 125W mercury super deluxe lamp lamp
H 280 "Tucano" N14043 surface mounted wall light No. 250.00 E H 323
in polycarbonate with polycarbonate diffuserand reflector, 70W Son/ metal halide lamp,80W mercury super deluxe lamp and gear
H 281 "THORN" FRAS 218 2 x 18W fluorescent No. 156.15 E H 234
luminaires with FRV 236 louvres
H 282 "THORN" BERGAME 100W Halogen wall No. 120.30 E H 235
mounted luminaire
ID : KMC/iy/ElecWorks (FY2012).xls (47) (21.10.2011) (May/147-3)
SOR Page 48
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 283 "THORN" CONCEPT A mounted luminaire No. 226.00 E H 236
with 26W PLC lamp
H 284 "THORN" DIAMOND DM 28/38 with No. 130.00 E H 237
separate lamp and gear compartment
and 2D 28W or 38W lamp
H 285 NA "TX" 18W tubular fitting with 75mm No. 149.40 E H 238
diameter low loss ballast starter,
capacitor and L18/31 tube
H 286 "VINIC" 18405/18305 surface mounted No. 180.00 E H 239
wall/ceiling luminaire die cast aluminium
and opal diffuser with 26W PLC lamp and
wall bracket
H 287 "VINIC" 17907/17909 wall mounted No. 335.00 E H 240
luminaire die cast aluminium with 70W
SON/metal halide lamp (IP55)
H 288 "VINIC" 15602 surface mounted luminaire No. 157.00 E H 241
die cast body with white polycarbonate
diffuser and 2 x PLC 18W lamps
H 289 "VINIC" 18004/18007 wall mounted No. 430.00 E H 242
luminaire die cast aluminium with 70W
SON/metal halide lamp (IP55)
H 290 "VINIC" 14101/14102/14103 surface No. 243.70 E H 243
mounted ceiling/wall luminaire similar to
WE-EF' DLB 259-DD-26(I) with
13/18/26W PL-C lamp
H 291 "VINIC" 14503 surface mounted ceiling/ No. 240.00 E H 244
wall luminaire similar to 'WE-EF'
DLG 259-DD-26 with 26W PL-C lamp
ID : KMC/iy/ElecWorks (FY2012).xls (48) (21.10.2011) (May/147-3)
SOR Page 49
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 292 NA "WE-EF" QRL-309-E-50/70NI wall No. 600.00 E H 249
mounted luminaire with 50 or 70 SON
lamp and UV stabilised polycarbonate lens
H 293 "WE-EF" DRB259-DD-13(I) recessed wall No. 234.00 E H 250
luminaire, corrosion resistant die-
cast aluminium alloy body and frame,
finish in RAL polyester powder coat,
polycarbonate UV-stabilized and vandal
resistant diffuser, weatherproof IP55 and
durable silicone gasket and 13W PLC
lamp
H 294 "WE-EF" DRB259-DD-18(I) recessed wall No. 235.90 E H 251
luminaire, corrosion resistant die-
cast aluminium alloy body and frame,
finish in RAL polyester powder coat,
polycarbonate UV-stabilized and vandal
resistant diffuser, weatherproof IP55 and
durable silicone gasket and 18W PLC
lamp
H 295 "WE-EF" DRB259-DD-26(I) recessed wall No. 224.20 E H 252
luminaire, corrosion resistant die-
cast aluminium alloy body and frame,
finish in RAL polyester powder coat,
polycarbonate UV-stabilized and vandal
resistant diffuser, weatherproof IP55 and
durable silicone gasket and 26W PLC
lamp
H 296 "WE-EF" DLB259-DD-13(I) surface wall No. 223.60 E H 253
luminaire, corrosion resistant die-
cast aluminium alloy body and frame,
finish in RAL polyester powder coat,
polycarbonate UV-stabilized and vandal
resistant diffuser, weatherproof IP55 and
durable silicone gasket and 13W PLC
lamp
H 297 "WE-EF" DLB259-DD-18(I) surface wall No. 226.10 E H 254
luminaire, corrosion resistant die-
cast aluminium alloy body and frame,
finish in RAL polyester powder coat,
polycarbonate UV-stabilized and vandal
resistant diffuser, weatherproof IP55 and
durable silicone gasket and 18W PLC
lamp
H 298 "WE-EF" DLB259-DD-26(I) surface wall No. 243.70 E H 255
luminaire, corrosion resistant die-
cast aluminium alloy body and frame,
finish in RAL polyester powder coat,
polycarbonate UV-stabilized and vandal
resistant diffuser, weatherproof IP55 and
durable silicone gasket similar to 'Vinic'
14101/14102/14103 and 13/18/26W PLC
lamp
ID : KMC/iy/ElecWorks (FY2012).xls (49) (21.10.2011) (May/147-3)
SOR Page 50
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
H 299 "WE-EF" DLG 259-DD-26 surface No. 240.00 E H 256
mounted ceiling/wall luminaire similar to
VINIC' 14503 with 26W PL-C Lamp
H 300 "WE-EF" LIGHTSPIKE LSA 050-E-50/80 No. 820.00 E H 257
wall mounted luminaire with
50 or 80W mercury super deluxe lamp, die
cast aluminium body and UV stabilised
polycarbonate lens
H 301 "WE-EF" LIGHTSPIKE LSA 050-E-70H No. 850.00 E H 258
wall mounted luminaire with
70W metal halide lamp, die cast aluminium
body and UV stabilised polycarbonate lens
H 302 "WE-EF" LIGHTSPIKE LSA 050-E-50/70NI No. 830.00 E H 259
wall mounted luminaire with
50 or 70W SON lamp, die cast aluminium
body and UV stabilised polycarbonate lens
H 303 NA "ZUMTOBELL" Cat No. HS1002 with 2 x No. 129.00 E H 260
11W PL lamps
H 304 "ZYMI" 3923 decorative wall light with No. 180.00 E H 261
opal diffuser and 18W PLC lamp
H 305 "3E AMANDINE" 1580 decorative wall No. 180.00 E H 262
luminaire in cast aluminium with frosted
diffuser and 18W PLC lamp
H 306 3EI AMANDINE 1601 decorative wall No. 450.00 E H 275
luminaire in aluminium with frosted
methacrylaic diffuser and top round plate
with clear diffuser c/w 70W SON lamp, or
70W CDM cool white or 70W metal
halide lamp integral control gear
and all accessories
H 307 3EI AMANDINE 1601 decorative wall No. 420.00 E H 310
luminaire in aluminium with frosted
methacrylaic diffuser diffuser and top round
plate with clear diffuser c/w 60W/65W
coolwhite/daylight spiral compact
fluorescent lamp integral control gear
and all accessories
H 308 "3EI" 025 decorative updown wall light in No. 285.00 E H 263
cast aluminium lens with 13W PLC and
18W PLC lamp
ID : KMC/iy/ElecWorks (FY2012).xls (50) (21.10.2011) (May/147-3)
SOR Page 51
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
I. FAN
REMOVAL OF EXISTING FAN
I 001 NA Remove existing exhaust, ceiling or wall No. 9.70 E I 1
mounted fans including regulator if any
including reinstatement and disposal off
site (New fan to be measured separately)
EXHAUST FAN
* Supply and install new exhaust fan of the
following size : (Removal of existing fan
to be measured seperately) *(002 004)
I 002 NA Exhaust fan 300mm (KDK, National, No. 97.00 E I 2
Mitsubishi)
I 003 NA Exhaust fan 450mm High Pressure No. 368.60 E I 3
(Industrial Type) (1400 RPM) (KDK,
National, Mitsubishi)
I 004 NA Exhaust fan 600mm High Pressure No. 776.00 E I 4
(Industrial Type)
(920 RPM) (KDK, National, Mitsubishi)
WALL AND CEILING FAN
* Supply and install the following ceiling/
wall fan (Removal of existing fan to be
measured separately) *(005 011)
I 005 NA 400mm diameter auto-rotating ceiling fan No. 158.10 E I 5
(KDK, National, Mitsubishi)
I 006 NA 400mm diameter wall bracket fan with No. 135.80 E I 6
pull cord regulator and switch
(KDK, National, Mitsubishi)
I 007 NA 500mm diameter wall bracket fan with No. 280.80 E I 7
pull cord regulator and switch
(KDK, National, Mitsubishi)
I 008 NA 508mm diameter wall fan 240V, 1400 rpm No. 240.55 E I 8
50Hz (Wing-Ton Model 303, Imasu/Tornado
Model DF 500-TW)
I 009 NA 635mm (25") diameter wall fan 240V, 1400 No. 250.00 E I 9
rpm 50 Hz (Wing-Ton Model 303, Imasu/
Tornado Model DF 650-TW)
I 010 NA 635mm diameter "KOUKYU" wall fan 240V, No. 230.00 E I 10
1400 rpm 50 Hz Model 303 (MG)
I 011 NA 1.5m diameter sweep ceiling fan No. 72.70 E I 11
regulator and teak board
(KDK, National, Mitsubishi)
ID : KMC/iy/ElecWorks (FY2012).xls (51) (21.10.2011) (May/147-3)
SOR Page 52
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
FAN PARTS AND ACCESSORIES
I 012 NA Hook for ceiling fan installed to No. 5.80 E I 12
existing concrete ceiling including cutting
mortice in concrete
I 013 NA Regulator for ceiling fan No. 15.50 E I 13
I 014 NA Fan condenser for 400mm or 500mm No. 12.60 E I 14
diameter wall bracket fan in replacement
I 015 NA Fan gear for industrial wall fan in No. 72.75 E I 15
replacement
FAN REPAIR/INSTALLATION
I 016 NA Repair/rewind of fan motor coil for 400mm No. 38.80 E I 16
or 500mm diameter wall bracket fan
I 017 NA Take delivery from any store, transport, No. 31.20 E I 17
cut stem as required and fix fan and
regulator (hook not included)
J. LAMP, BULB, TUBE & BALLAST
BULB
J 001 NA Tungsten incandescent lamp bulbs 15W No. 1.70 E J 1
to 100W
J 002 NA 60W to 150W Par 38 lamp E27 No. 11.65 E J 2
(Philip, Thorn, Splendour, Sylvania, Osram)
J 003 NA 100W bulb for roof top aviation light No. 2.50 E J 3
J 004 NA 100 watts GLS coiled tungsten No. 4.35 E J 4
incandescent bulb with ES caps
for aircraft warning light
J 005 NA 60-100W 16,000 hrs bulb for aircraft No. 15.00 E J 5
warning light
J 006 NA Par 56 300W 12V or 230V spot or flood No. 50.00 E J 6
J 007 NA Par 64 100-300W GX16D or screw No. 100.00 E J 7
terminal
FLUORESCENT TUBE
* T8 fluorescent tube (26mm dia) (Philips,
Hitachi, GE, Osram, National) *(008 014)
J 008 NA DELETED E J 8
J 009 900mm-30W (daylight) No. 3.10 E J 9
NA
J 010 DELETED E J 10
ID : KMC/iy/ElecWorks (FY2012).xls (52) (21.10.2011) (May/147-3)
SOR Page 53
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
J 011 NA 1500mm-58W (daylight) of 230V No. 3.80 E J 11
J 012 NA 600mm-18W (warm or cool white or No. 3.50 E J 12
daylight) (Philips colour 83/84, GE,
Osram Lumilux 31, Sylvania)
J 013 NA 900mm-30W (warm or cool white) No. 3.75 E J 13
(Philips colour 83/84, GE, Osram Lumilux
31, Sylvania)
J 014 NA 1200mm-36W (warm or cool white or) No. 4.00 E J 14
daylight) (Philips colour 83,
Osram Lumilux 31/21, Sylvania)
* T5 fluorescent tube (15 to 17mm diameter)
(Philips, Osram, GE, Sylvania) *(015 017)
J 015 NA 600mm-14W (daylight, cool white or warm No. 6.00 E J 15
white)
J 016 NA 1200mm-28W (daylight, cool white or warm No. 6.60 E J 16
white)
J 017 NA 849mm-39W (daylight, cool white or warm No. 10.00 E J 108
white)
CIRCULAR FLUORESCENT TUBE
* Circular fluorescent tube
(Philips, Osram, GE, Sylvania) *(018 020)
J 018 NA 20-32W daylight / warm white/coolwhite No. 6.00 E J 19
J 019 NA 40W daylight / warm white/coolwhite No. 6.50 E J 20
J 020 NA Osram Circolux-EL 28-32W E27 No. 40.00 E J 23
PARTS & ACCESSORIES FOR
FLUORESCENT FITTING
J 021 NA Lampholder for fluorescent lamp (all tube Pair 1.95 E J 24
diameter and sizes)
J 022 NA Starter for fluorescent lamp No. 1.27 E J 25
(Philips, Osram, Megaman)
J 023 NA Fluorescent starter holder No. 1.25 E J 26
J 024 NA Capacitor 3.25/5/8 mfd for fluorescent No. 2.80 E J 27
lamp
J 025 NA Fused terminal with 2A fuse (BG) No. 6.00 E J 28
ID : KMC/iy/ElecWorks (FY2012).xls (53) (21.10.2011) (May/147-3)
SOR Page 54
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
J 026 NA Moulded prismatic/reeded/opal/frosted No. 12.00 E J 29
diffuser for 1 x 18W or 1 x 36W mounted
channel fluorescent luminaries (for
Aerolite, Eurotec, Ilmas, Lumenax,
Simlite, Thorlux, Philips, ITT-Reiss,
Siemens, Thorn)
J 027 NA Moulded prismatic/reeded/opal/frosted No. 15.00 E J 30
diffuser for 2 x 18W or 2 x 36W mounted
channel fluorescent luminaries (for
Aerolite, Eurotec, Ilmas, Lumenax,
Simlite, Thorlux, Philips, ITT-Reiss,
Siemens, Thorn)
J 028 NA Flat prismatic/reeded/opal/frosted No. 32.00 E J 31
diffuser only for recessed light (Simlite,
Davis, Trimex, Woolite)
J 029 NA End cap or decorative cap of ABS No. 4.00 E J 32
materials for 1 x 18W / 36W fluorescent
luminaires
COMPACT FLUORESCENT LAMP/TUBE
* Compact Fluorescent/Energy Saving
bulb-daylight, warmwhite or coolwhite
(Osram, Philips, Sylanvia, GE) *(030 045)
J 030 NA 5-11W 2 pin (GE Biax-S, Osram Dulux-S, No. 2.63 E J 33
Philips PLS, Sylvania Lynx-S)
J 031 NA 5-11W 4 pin (GE Biax-S/E, Osram No. 7.80 E J 34
Dulux-SE, Philips PLS, Sylvania Lynx-SE)
J 032 NA 10-26W 2 pin (GE Biax-D, Osram Dulux-D, No. 5.20 E J 35
Philips PLC, Sylvania Lynx-D)
J 033 NA 10-26W 4 pin (GE Biax-D/E, Osram No. 12.00 E J 36
Dulux-DE, Philips PLC, Sylvania Lynx-DE)
J 034 NA 13-26W 2 pin (GE Biax-T, Osram No. 12.50 E J 37
Dulux-T or T/IN, Philips PLT, Sylvania
Lynx-T)
J 035 NA 32W 2 pin (Osram Dulux-T or other No. 15.00 E J 38
approved)
J 036 NA 13-26W 4 pin (GE Biax-T/E, Osram No. 17.80 E J 39
Dulux-T/E or T/E/IN, Philips PLT, Sylvania
Lynx-TE)
J 037 NA 32-42W 4 pin (GE Biax-T/E, Osram No. 27.00 E J 40
Dulux-T or T/E/IN, Philips PLT, Sylvania
Lynx-TE)
ID : KMC/iy/ElecWorks (FY2012).xls (54) (21.10.2011) (May/147-3)
SOR Page 55
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
J 038 NA 18-36W 2 pin or 4 pin (GE Biax-L, Osram No. 17.50 E J 41
Dulux-L, Philips PLL, Sylvania Lynx-L-LE)
J 039 NA 40-55W 2 pin or 4 pin (GE Biax-L, Osram No. 19.00 E J 42
Dulux-L, Philips PLL, Sylvania Lynex-L-LE)
J 040 NA 18-36W 4 pin (Osram Dulux F or other No. 27.00 E J 43
approved)
J 041 NA 7-11W (GE Electronic Biax D or M, Osram No. 16.80 E J 44
Dulux-EL, Philips PLEU, Sylvania Mini
Lynx)
J 042 NA 15-25W (GE Electronic Biax T, Osram No. 18.50 E J 45
Dulux-EL, Philips PLET)
J 043 NA 18-25W (Osram Dulux-EL, Eco/Philips SL No. 17.20 E J 46
or other approved)
J 044 NA 10W to 40W 2D warm white or daylight No. 15.50 E J 47
fluorescent lamp 2 or 4 pin
(GE, Thorn)
J 045 60W or 65W self ballasted high power No. 34.00 E J 107
compact fluorescent lamp (coolwhite/
daylight) (Energy and ecobulb)
TUBE FOR EMERGENCY LIGHT / EXIT
SIGN (Philips, Osram, GE, Sylvania)
J 046 NA 8W Fluorescent tube for emergency No. 3.80 E J 48
lights / exit signs
J 047 NA 10W Fluorescent tube for emergency No. 4.00 E J 49
lights / exit signs
COMPACT LAMP ACCESSORY
J 048 NA 2 pin or 4 pin type compact fluorescent No. 2.00 E J 50
tube/2D fluorescent's lamp holder
J 049 NA Screw mounting type compact fluorescent No. 5.25 E J 51
tube's holder
HALOGEN BULB/LAMP/TUBE
J 050 NA 35mm Halogen lamp 12V 20W-50W No. 3.90 E J 52
(Osram, Philip, Thorn)
J 051 NA 51mm Halogen lamp 12V 20W-50W No. 4.20 E J 53
(Osram, Philip, Thorlux)
* Halogen tube double-ended (Philip,
Osram, GE, Sylvania) *(052 054)
J 052 NA 100-250W 77mm R7S tube No. 9.50 E J 54
J 053 NA 150-500W 117mm R7S tube No. 11.00 E J 55
J 054 NA 750-1000W 189mm R7S tube No. 16.00 E J 56
ID : KMC/iy/ElecWorks (FY2012).xls (55) (21.10.2011) (May/147-3)
SOR Page 56
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
* Halogen tube single-ended (Osram, GE
Sylvania, Halolux, Philips) *(055 056)
J 055 NA 60-250W B15D 230V clear or frosted No. 36.00 E J 57
J 056 NA 60-250W E27 230V clear or frosted No. 32.00 E J 58
* Halogen par E27 230V (Philips, Osram,
Sylvania, GE) *(057 058)
J 057 NA Par 20 50W Spot or flood No. 22.00 E J 59
J 058 NA Par 30 75-100W Spot or flood No. 28.00 E J 60
* Halogen Capsule 12V (Osram, Philips,
GE, Sylvania) *(059 061)
J 059 NA 6V 10W G4 No. 3.00 E J 61
J 060 NA 12V 10-20W G4 No. 3.20 E J 62
J 061 NA 12V 35-100W G6.35 No. 3.50 E J 63
HALOGEN LAMP ACCESSORIES
J 062 NA Ceramic holder for 50W/20W halogen No. 2.00 E J 64
bulb/lamp
J 063 NA 12V transformer 50VA to 75VA for halogen No. 10.50 E J 65
lamp (Vossloh-Schwabe, Optima, TCI)
LAMP FOR GARDEN/STREET LIGHTS
* High Pressure Sodium Vapour SON lamp
with E27/E40 base (Osram, Philips, GE,
Sylvania) *(064 068)
J 064 NA 50-70W E27 (Elliptical or tubular, No. 34.00 E J 66
including built-in Ignitor lamp)
J 065 NA 70-150W Rx7S double-ended No. 90.00 E J 67
J 066 NA 100-150W E40 (Elliptical or tubular) No. 45.10 E J 68
J 067 NA 250W E40 (Elliptical or tubular) No. 55.00 E J 69
J 068 NA 400W E40 (Elliptical or tubular) No. 62.00 E J 70
* Mercury Lamp with E27/E40 base
(Osram, Philips, GE) *(069 075)
J 069 NA 160W BC or ES Blended/self-ballasted No. 12.90 E J 71
230V
J 070 NA 250W E40 Blended/self-ballasted 230V No. 17.50 E J 72
J 071 NA 50-125W No. 12.90 E J 73
J 072 NA 250W E40 No. 26.00 E J 74
ID : KMC/iy/ElecWorks (FY2012).xls (56) (21.10.2011) (May/147-3)
SOR Page 57
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
J 073 NA 400W E40 No. 32.00 E J 75
J 074 NA Super De-Luxe 50-125W No. 35.00 E J 76
J 075 NA 400W HPI Bus high pressure metal halide No. 96.80 E J 77
gas discharge lamp with E40 base,
"PHILIPS" or other approved type
* Metal Halide Lamp with E40 base (Osram
HQI, Philips HPI/MHN-TD) *(076 081)
J 076 NA 70-150W double-ended Rx7s base No. 78.00 E J 78
(warmwhite, coolwhite, daylight)
J 077 NA 250W double-ended FC2 base (warmwhite, No. 130.00 E J 79
coolwhite, daylight)
J 078 NA 400W double-ended FC2 base (warmwhite, No. 160.00 E J 80
coolwhite, daylight)
J 079 NA 70-150W E27 clear or frosted (warmwhite, No. 95.00 E J 81
coolwhite)
J 080 NA 250W E40 (Elliptical or tubular) No. 75.00 E J 82
J 081 NA 400W E40 (Elliptical or tubular) No. 85.00 E J 83
J 082 NA 400W MBIF high pressure metal halide No. 165.85 E J 84
lamp G53455 ignitor & E40, porcelain
lampholder, "THORN" or other approved
type
J 083 NA 250W MBIF metal halide lamp No. 145.50 E J 85
& E40 base "THORH" or other
approved type
J 084 NA 250W SON-T tubular high pressure No. 62.30 E J 86
sodium vapour discharge lamp with E40
base, "PHILIPS" or other approved type
J 085 NA 200 watts E/27 Rough Device lamp bulb No. 14.55 E J 87
J 086 NA 150W "GE" G12 2 pin Metal Halide Lamp No. 75.00 E J 107
BALLAST AND LAMP ACCESSORIES
J 087 NA 1000W metal halide lamp c/w ignitor, No. 442.75 E J 109
ballast and capacitor
J 088 NA Low-loss ballast 18W to 36W for No. 9.40 E J 88
fluorescent and 2-D lamp or 9W to 26W for
compact fluorescent lamp (ATCO, Helvar,
Vossloh Schwabe)
* Non-Dimmable electronic ballast, PSB
tested for the following :- (Osram,
Schwabe, Helvar Tritronic) *(089 093)
J 089 NA 1 x 18W or 36W for T8 26mm diameter No. 35.00 E J 89
fluoresent lamp
J 090 NA 2 x 18W or 36W for T8 26mm diameter No. 55.00 E J 90
fluoresent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (57) (21.10.2011) (May/147-3)
SOR Page 58
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
J 091 NA Multi-watt 14W to 35W for T5 No. 38.00 E J 91
fluorescent lamp
J 092 NA QT 18 - 26W for compact Fluorescent lamp No. 85.00 E J 92
J 093 NA QT 36 - 40W for Dulux-L or PL-L lamp No. 98.00 E J 93
* Dimmable electronic ballast for
fluorescent lamp PSB tested for the
following :- (Osram, Helvar, Schwabe,
Tritronic) *(094 096)
J 094 NA DELETED E J 108
J 095 NA DELETED E J 94
J 096 NA DELETED E J 95
* Ballast for H.I.D lamp (Vossloh-Schwabe,
Atco, Parmar, Helvar) *(097 101)
J 097 NA Mercury 50-125W No. 27.80 E J 96
J 098 NA Mercury 250-400W No. 45.00 E J 97
J 099 NA HPSV (SON) & Metal Halide 70W No. 22.10 E J 98
J 100 NA HPSV (SON) & Metal Halide 100W to No. 39.30 E J 99
150W
J 101 NA HPSV (SON) & Metal Halide 250W to No. 56.60 E J 100
400W
J 102 NA "Dluces" DLS-50W-EDL Electrodeless No. 316.00 E J 110
Discharge Lamp c/w high efficiency
transformer and control gear
J 103 NA "Dluces" DLS-85W-EDL Electrodeless No. 348.00 E J 111
Discharge Lamp c/w high efficiency
transformer and control gear
OTHER LAMP ACCESSORIES
J 104 NA Superimposed ignitor for 70W to 400W No. 38.00 E J 101
high pressure sodium or metal halide lamp
(Philips, Parmer, Bag Turgi, Thorn)
J 105 NA E27 Porcelain lampholder for discharge No. 13.85 E J 102
lamp
J 106 NA E40 Porcelain lampholder for discharge No. 16.50 E J 103
lamp
J 107 NA White moulded insulated bayonet-type No. 4.45 E J 104
batten lampholder, 5 Amp with skirt, 3
terminals and loop-in earth terminal similar
to Delta Cat No. 1031 or other approved
J 108 NA White ceiling rose three terminals 5 Amp No. 4.85 E J 105
similar to Delta Cat No. 1200 or other
approved
J 109 NA Adaptors to lamp holders No. 2.40 E J 106
ID : KMC/iy/ElecWorks (FY2012).xls (58) (21.10.2011) (May/147-3)
SOR Page 59
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K. LANTERNS
REMOVAL OF EXISTING LANTERN
K 001 NA Remove existing lantern No. 13.60 E K 1
and disposal off site (New fitting to be
measured separately)
LANDSCAPE/GARDEN/CARPARK
LANTERN
* Supply, deliver to site and install the
following including integral control gear,
connecting wiring, mounting brackets,
screws, connections and other accessories
(Removal of existing lantern to be
measured separately) *(002 229)
K 002 "AAL" SLFHW22 with 70W CDM No. 930.00 E K 2
coolwhite or 70W metal halide lamp,
polycarbonate / methacrylate diffuser
K 003 "AAL" SLFHW22 with 60W/65W No. 880.00 E K 205
coolwhite/daylight self ballasted
high power compact fluorescent lamp,
polycarbonate/methacrylate diffuser
K 004 "AAL" Cat no. ALR205 with 70W high No. 905.00 E K 3
pressure sodium or 70W CDM coolwhite
or 70W metal halide lamp and acrylic
diffuser
K 005 "AAL" Cat no. ALR205 with 60W/65W No. 855.00 E K 206
coolwhite/daylight self ballasted
high power compact fluorescent lamp
and acrylic diffuser
K 006 'AAL' SLVT LARGENT of one piece cast No. 1,100.00 E K 4
aluminium construction for body with
frosted diffuser, powder coated finish,
performance reflector and 70W SON or
70W CDM coolwhite or 70W metal halide
lamp
K 007 'AAL' SLVT LARGENT of one piece cast No. 1,050.00 E K 207
aluminium construction for body with
frosted diffuser, powder coated finish,
performance reflector and 60W/65W
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 008 "AEC" LUNOID VPC (Flat Lens)/PL (Plain No. 484.50 E K 5
Lens)/CP (reeded Lens) with 70W SON
lamp/70W CDM coolwhite or 70W
metal halide lamp
K 009 "AEC" LUNOID VPC (Flat Lens)/PL (Plain No. 434.50 E K 208
Lens)/CP (reeded Lens) with 60W/65W
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 010 NA "AEG" STRADALUX 470 with 70W SON / No. 760.00 E K 6
70W CDM coolwhite or 70W metal halide
lamp and clear/ripped PMMA diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (59) (21.10.2011) (May/147-3)
SOR Page 60
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 011 NA "AEG" STRADALUX 470 with 60W/65W No. 710.00 E K 209
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 012 NA "AEG" TRIANGEL TYPE-A1 with 70W No. 1,000.00 E K 7
SON / 70W CDM coolwhite or 70W metal
halide lamp, clear safety glass diffuser
K 013 NA "AEG" TRIANGEL TYPE-A1 with 60W/65W No. 950.00 E K 210
coolwhite/daylight spiral compact
fluorescent lamp, clear safety glass diffuser
K 014 NA "AEC" VISTA 70505/70506/70510 wall No. 733.00 E K 8
mounted luminaire with arcylic diffuser,
louvre and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 015 NA "AEC" VISTA 70505/70506/70510 wall No. 683.00 E K 211
mounted luminaire with arcylic diffuser,
louvre and 60W/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
K 016 NA "AEG" RONDO 1400.006 with reflector, No. 836.10 E K 9
I-shaped galvanised steel
bracket and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 017 NA "AEG" RONDO 1400.006 with reflector, No. 786.10 E K 9
I-shaped galvanised steel
bracket and 60W/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
K 018 NA "AEG" RONDO with reflector, I-shapped No. 1,490.00 E K 10
galvanised steel bracket and 2 x 70W SON,
2 x 70W CDM coolwhite or 2 x 70W metal
halide lamp
K 019 NA "AEG" RONDO with reflector, I-shapped No. 1,440.00 E K 212
galvanised steel bracket and 60W/65W
coolwhite/daylight self ballasted high
power compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (60) (21.10.2011) (May/147-3)
SOR Page 61
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 020 NA "A+G" QUARTIER 7435/7438 with No. 1,151.00 E K 11
914/011/025 bracket, polycarbonate
diffuser and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 021 NA "A+G" QUARTIER 7435/7438 with No. 1,101.00 E K 213
914/011/025 bracket, polycarbonate
diffuser and 60W/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 022 NA "A+G" ZOB 1060 wtih 70W high pressure No. 1,040.20 E K 12
sodium lamp or 70W CDM coolwhite or
70W metal halide lamp and polycarbonate
diffuser
K 023 NA "A+G" ZOB 1060 wtih 60W/65W No. 990.20 E K 214
coolwhite/daylight spiral compact
fluoresent lamp and polycarbonate diffuser
K 024 NA "A+G" FUTURA 1950 with polycarbonate No. 908.90 E K 13
diffuser and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 025 NA "A+G" FUTURA 1950 with 60W/65W No. 858.90 E K 215
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 026 NA "A+G" KUGEL 7407 with 011 or 023 No. 778.90 E K 14
bracket, polycarbonate diffuser and 70W
SON or 70W CDM coolwhite or 70W metal
halide lamp
K 027 NA "A+G" KUGEL 7407 with 60W/65W No. 728.90 E K 216
coolwhite/daylight spiral compact
fluoresent lamp
K 028 NA "A+G" ALTER WEG 7468 with 70W high No. 1,209.60 E K 15
pressure sodium lamp or 70W CDM
coolwhite or 70W metal haldie
lamp and polycarbonate diffuser
K 029 NA "A+G" ALTER WEG 7468 with 60W/65W No. 1,159.60 E K 217
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 030 NA "A+G" NEUMARKT 7650 with 70W high No. 1,202.80 E K 16
pressure sodium lamp or 70W CDM
coolwhite or 70W metal haldie
lamp and polycarbonate diffuser
K 031 NA "A+G" NEUMARKT 7650 with 60W/65W No. 1,152.80 E K 217
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 032 NA "A+G" WING 1720.022 post top luminaire No. 1,315.00 E K 185
c/w 1 x 70W E27 HSE high pressure
sodium/mercury lamp, die-cast aluminium
housing, polycarbonate diffuser and integral
control gear
K 033 NA "ALCATEL" FG cut off/CL with 70W SON No. 325.00 E K 17
lamp or 70W CDM coolwhite or 70W and
metal halide lamp, and
clear polycarbonate diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (61) (21.10.2011) (May/147-3)
SOR Page 62
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 034 NA "ALCATEL" FG cut off/CL with 60W/65W No. 275.00 E K 218
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 035 NA "ALCATEL" URBIS 2000 single post top/ No. 605.20 E K 18
side mounting luminaire with 70W SON or
70W CDM coolwhite or 70W metal halide
lamp and clear flat tempered glass/clear
bowl diffuser
K 036 NA "ALCATEL" URBIS 2000 single post top/ No. 605.20 E K 247
side mounting luminaire with 60W/65W
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 037 "ALL" (AL-01-B/1/400MH-240-TCP- No. 810.00 E K 19
BK-PCC) post top mounting luminaire
with 400W metal halide lamp, aluminium
housing, clear tempered glass diffuser
K 038 "ATP" ALAMEDA/EUROPA VIAL with No. 509.00 E K 20
70W SON or 70W CDM coolwhite or 70W
metal halide lamp, body frame in corrosion
resistant glass reinforced polymer and
clear/opal UV-stabilised polycarbonate
diffuser
K 039 "ATP" ALAMEDA/EUROPA VIAL with No. 459.00 E K 219
60W/65W coolwhite/daylight spiral
compact fluorescent lamp, body frame
in corrosion consistant glass reinforced
polymer and clear/opal UV-stabilised
polycarbonate diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (62) (21.10.2011) (May/147-3)
SOR Page 63
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 040 "ARCHITECTURAL" landscape lighting No. 770.00 E K 21
luminaire Cat No. AL-02-R1-125MV-240/50
A-GR with 125W metal halide lamp,
forward throw optical system, heavy gauge
aluminium housing, clear tempered glass
lens and mounting bracket
K 041 "ARCHITECTURAL" landscape lighting No. 850.00 E K 22
luminaire Cat No. AL-02-R1-400MH-240/
50-A-GR with 400W metal halide lamp,
forward threw optical cystem, heavy gauge
aluminium housing, clear tempered glass
lens and mounting bracket
K 042 Arcluce Avenue 7203 1x70/50 post top No. 550.00 E H 189
fitting c/w reinforced technopolymer
cover, polycarbonate diffuser, Vossloh
Schwabe ballast and Osram NAV-E 4Y
70W super sodium lamp IP65
K 043 Arcluce Avenue 7203 1x60/65 post top No. 500.00 E H 220
fitting c/w reinforced technopolymer cover,
polycarbonate diffuser, and 60W/65W
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 044 Arcluce Avenue 7206 1x70/50 post top No. 550.00 E H 190
fitting c/w reinforced technopolymer
cover, polycarbonate diffuser, control
gear and 70W CDM coolwhite or 70W
metal halide lamp
K 045 Arcluce Avenue 7206 1x60/65 post top No. 500.00 E H 221
fitting c/w reinforced technopolymer cover,
polycarbonate diffuser, control gear and
60W/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 046 Arcluce Street 7233 1x70/50 post top No. 530.00 E K 191
fitting c/w reinforced technopolymer
cover, polycarbonate diffuser, anode
polish & oxidated aluminium reflector,
Vossloh Schwabe ballast and
Osram NAV-E 4Y
70W super sodium lamp IP65
K 047 Arcluce Street 7233 1x60/65 post top No. 480.00 E K 222
fitting c/w reinforced technopolymer
cover, polycarbonate diffuser, anode polish
& oxidated aluminium reflector, and
60W/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 048 Arcluce Street 7236 1x70/50 post top No. 430.00 E K 192
fitting c/w reinforced technopolymer
cover, polycarbonate diffuser, anode
polish & oxidated aluminium reflector,
control gear and 70W CDM coolwhite or
70W metal halide lamp
ID : KMC/iy/ElecWorks (FY2012).xls (63) (21.10.2011) (May/147-3)
SOR Page 64
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 049 Arcluce Street 7236 1x60/65 post top No. 380.00 E K 223
fitting c/w reinforced technopolymer
cover, polycarbonate diffuser, anode
polish & oxidated aluminium reflector,
control gear and 60W/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
K 050 ATP LV ref 42.1.76.11.03 1x70W post top No. 950.00 E K 193
fitting c/w polyamide reinforce with fibre
glass body, temper glass diffuser,
polycarbonate cover , 31.2.41.25.03
adapter, integral Vossloh Schwabe
ballast and Osram Nav-T 70W
super sodium lamp IP69
K 051 ATP LV ref 42.1.76.11.03 1x60/65 post No. 900.00 E K 224
top fitting c/w polyamide reinforce with fibre
glass body, temper glass diffuser,
polycarbonate cover, 31.2.41.25.03 adapter,
and 60W/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 052 "BEGA" CAT No. 8071/8074 with 70W No. 999.00 E K 23
SON/70W CDM coolwhite or 70W
metal halide lamp and safety glass diffuser
K 053 "BEGA" CAT No. 8071/8074 with No. 949.00 E K 23
60W/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp and safety glass diffuser
K 054 "BEGA" Cat No. 8081 with symmetrical No. 1,041.00 E K 24
light distribution 70W SON Lamp or
70W CDM coolwhite or 70W metal halide
K 055 "BEGA" Cat No. 8081 with symmetrical No. 991.00 E K 225
light distribution 60W/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (64) (21.10.2011) (May/147-3)
SOR Page 65
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 056 "BEGA" Cat no. 8085 with 70W CDM No. 741.10 E K 25
coolwhite or 70W metal halide lamp
and symmetrical mirror reflector
K 057 "BEGA" Cat no. 8085 with 60W/65W No. 691.00 E K 226
coolwhite/daylight self ballasted
high power compact fluorescent lamp
and symmetrical mirror reflector
K 058 "BEGA" Cat no. 8141 surface washers No. 815.80 E K 26
with 70W SON lamp
K 059 "BEGA" Cat no. 8141 surface washers No. 765.80 E K 227
with 60W/65W coolwhite/daylight
spiral compact fluorescent lamp
K 060 "BEGA" Cat no. 9998 with 80W/125W No. 1,087.00 E K 27
mercury super deluxe lamp and safety
glass diffuser
K 061 NA "BERGNER & WEISER" ELEGANT No. 814.00 E K 28
10212/10215 with out and inside structured
glass cover, cast aluminium, chromatized
and powder coated housing, pure anodized
aluminium mirror reflector and 70W SON
/70W CDM coolwhite or 70W metal halide
lamp
K 062 NA "BERGNER & WEISER" ELEGANT No. 764.00 E K 229
10212/10215 with out and inside structured
glass cover, cast aluminium, chromatized
and powder coated housing, pure anodized
aluminium mirror reflector and 60W/65W
coolwhite/daylight spiral compact
fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (65) (21.10.2011) (May/147-3)
SOR Page 66
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 063 "ARCLUCE" ARES ASIMMETRICO 8154-12, No. 1,380.00 E K 29
with 400W metal halide lamp
K 064 NA "BTI" ARMATUUR KFK Serie 5130 with No. 580.00 E K 30
70W High Pressure Sodium lamp
K 065 NA "DELTA" Cat No. F-24125-M/F-24070-S No. 973.00 E K 31
with 125W metal halide lamp/70W SON
lamp, UV-rays stabilized clear/frosted/
opal polycarbonate diffuser and die-cast
aluminium body
K 066 "DW WINDSOR YORK NEWPORT/YORK No. 963.00 E K 32
WATERFORD/YORK HENLY/DOVER/
HATFIELD" with die-cast aluminium base,
spun aluminium canopy, clear or reeded
polycarbonate diffuser, base cone
reflector, diamond optic variable refelctor
system and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 067 "DW WINDSOR YORK NEWPORT/YORK No. 913.00 E K 230
WATERFORD/YORK HENLY/DOVER/
HATFIELD" with die-cast aluminium base,
spun aluminium canopy, clear or reeded
polycarbonate diffuser, base cone
reflector, diamond optic variable refelctor
system and 60W/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
K 068 "ELENCO VEGA" post-top fitting complete No. 810.00 E K 33
with 125W metal halide lamp
K 069 NA "ELTE" CHINESE HAT I 6710/6711 with No. 1,128.00 E K 34
70W SON or 70W CDM coolwhite
or 70W metal halide fixture in
corrosion free aluminium with
inner optical louvred reflector built in
cylindrical clear, frosted or opal UV-
stabilized polycarbonate diffuser
K 070 NA "ELTE" CHINESE HAT I 6710/6711 with No. 1,078.00 E K 232
60W/65W coolwhite/daylight spiral
compact fluorescent lamp in corrosion free
aluminium with inner optical louvred
reflector built in cylindrical clear,
frosted or opal UV-stabilized polycarbonate
diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (66) (21.10.2011) (May/147-3)
SOR Page 67
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 071 "ERNST" 381006/370104 with 125W metal No. 861.00 E K 35
halide lamp
K 072 "ERNST" 379004 with 125W metal halide No. 977.50 E K 36
lamp
K 073 NA "EUROTEC" VENEZIA-150 1 x 150W SON No. 425.00 E K 37
or metal halide die-cast corrosion resistant
light alloy, field adjust Asymmetrical/
Symmetrical optic decorative pole light
with colour filter IP54
K 074 "EWO" DR 1001-A Decorative weather No. 719.00 E K 38
proof post top lantern with section
tampered and epoxy powdered coated,
ELN 23W electronic energy saving lamp
K 075 NA "EWO" PYRUS LF with 70W metal halide/ No. 477.20 E K 39
70W SON lamp or 70W CDM coolwhite
and clear or opal diffuser
K 076 NA "EWO" PYRUS LF c/w 60W/65W No. 427.20 E K 233
coolwhite/daylight self ballasted
high power compact fluorescent lamp
and clear or opal diffuser
K 077 "FABRIKANT" 4114/4115/4116 400mm dia. No. 330.00 E K 40
spherical opal polyethylene luminaire with
corrosion resistant die-cast aluminium
alloy base, heat shield, 70W metal halide,
70W SON or 70W CDM coolwhite lamp
K 078 "FABRIKANT" 4114/4115/4116 400mm dia. No. 280.00 E K 234
spherical opal polyethylene luminaire with
corrosion resistant die-cast aluminium
alloy base, heat shield, 60W/65W
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 079 "FABRIKANT" 4117/4118/4119 450mm dia. No. 360.00 E K 41
spherical opal polyethylene luminaire with
corrosion resistant die-cast aluminium
alloy base, heat shield, 70W metal halide,
70W SON lamp or 70W CDM coolwhite
lamp
K 080 "FABRIKANT" 4117/4118/4119 450mm dia. No. 310.00 E K 235
spherical opal polyethylene luminaire with
corrosion resistant die-cast aluminium
alloy base, heat shield, 60W/65W
coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 081 "FABRIKANT" 4034 with corrosion No. 708.00 E K 42
resistant die-cast aluminium alloy body
and canopy, diffuser of UV stabilised and
vandal resistant polycarbonate, anolised
high purity aluminium reflector and 70W
SON or 70W CDM coolwhite lamp
ID : KMC/iy/ElecWorks (FY2012).xls (67) (21.10.2011) (May/147-3)
SOR Page 68
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 082 "FABRIKANT" 4034 with corrosion No. 658.00 E K 236
resistant die-cast aluminium alloy body
and canopy, diffuser of UV stabilised and
vandal resistant polycarbonate, anolised
high purity aluminium reflector and 60W/
65W coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 083 "FABRIKANT" 4120/4121 500mm dia No. 475.00 E K 43
decorative spherical opal polyethylene
luminaire with die-cast aluminium base,
decorative black enamelled aluminium
"BASKET" and 70W SON or 70W CDM
coolwhite or 70W metal halide
K 084 "FABRIKANT" 4120/4121 500mm dia No. 425.00 E K 237
decorative spherical opal polyethylene
luminaire with die-cast aluminium base,
decorative black enamelled aluminium
"BASKET" and 60W/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
K 085 NA "FIVEP" ALICONE 1 with 70W SON or No. 504.00 E K 45
70W CDM coolwhite or 70W metal halide
K 086 NA "FIVEP" ALICONE 1 with 60W/65W No. 454.00 E K 238
coolwhite/daylight spiral compact
fluorescent lamp
K 087 "FUMAGALLI" TOBIA Lantern post-top No. 680.00 E K 46
luminaire with clear or opal diffuser,
and 70W SON, 70W CDM coolwhite or
70W metal halide
K 088 "FUMAGALLI" TOBIA Lantern post-top No. 630.00 E K 239
luminaire with clear or opal diffuser,
and 60W/65W coolwhite/daylight
self ballasted high power
compact fluorescent lamp
K 089 "FUMAGALLI" NOEMI Lantern post-top No. 680.00 E K 47
luminaire with clear or opal diffuser,
and 70W SON, 70W CDM coolwhite or
70W metal halide
K 090 "FUMAGALLI" NOEMI Lantern post-top No. 630.00 E K 240
luminaire with clear or opal diffuser,
and 60W/65W coolwhite/daylight
self ballasted high power
compact fluorescent lamp
K 091 "GREISFSWALD" with 125W metal halide No. 1,290.00 E K 48
ID : KMC/iy/ElecWorks (FY2012).xls (68) (21.10.2011) (May/147-3)
SOR Page 69
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 092 GGE801 1x150/100 street lantern c/w die No. 588.00 E K 194
cast aluminium body, temper glass
diffuser, Vossloh Schwabe power
reduction ballast Nav-T 150W super
sodium lamp
K 093 Greifswald 1x70W/80W post top fitting No. 1,800.00 E K 195
c/w aluminium body and struts,
galvanized sheel steel canpony, PMMA
diffuser, integral control gear and 70W
sodium and 80W super deluxe mercury
lamp IP54
K 094 Greifswald 1x70W/80W post top fitting No. 1,750.00 E K 241
c/w aluminium body and struts,
galvanized sheel steel canpony, PMMA
diffuser, integral control gear and
60W/65W coolwhite/daylight
self ballasted high power
compact fluorescent lamp
K 095 "HELLUX" 034/035 with 70W high pressure No. 930.00 E K 49
sodium / 70W CDM coolwhite or 70W
metal halide lamp and acrylic diffuser
K 096 "HELLUX" 034/035 with 60W/65W No. 880.00 E K 242
coolwhite/daylight self ballasted high
power compact fluorescent lamp
and acrylic diffuser
ID : KMC/iy/ElecWorks (FY2012).xls (69) (21.10.2011) (May/147-3)
SOR Page 70
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 097 "HELLUX" 401-4 with 70W high pressure No. 667.40 E K 50
sodium / 70W CDM coolwhite or 70W
metal halide lamp and acrylic diffuser
K 098 "HELLUX" 401-4 with 60/65W coolwhite/ No. 617.40 E K 248
daylight spiral compact fluorescent
lamp and acrylic diffuser
K 099 "HELLUX" 115 with 70W high pressure No. 1,142.70 E K 51
sodium / 70W CDM coolwhite or 70W
metal halide lamp and acrylic diffuser
K 100 "HELLUX" 115 with 60/65W coolwhite/ No. 1,092.70 E K 249
daylight spiral compact fluorescent
lamp and acrylic diffuser
K 101 "HOFFMEISTER" BASKETTE Cat No. No. 1,003.00 E K 52
1.2280.1.49.721/1.2280.3.57.721/
1.2273.1.49.721/1.2273.3.57.721/
1.2274.1.49.721/1.2274.3.57.721 of cast
aluminium housing, silver anodized
aluminium reflector and clear acrylic
diffuser with 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 102 "HOFFMEISTER" BASKETTE Cat No. No. 953.00 E K 250
1.2280.1.49.721/1.2280.3.57.721/
1.2273.1.49.721/1.2273.3.57.721/
1.2274.1.49.721/1.2274.3.57.721 of cast
aluminium housing, silver anodized
aluminium reflector and clear acrylic
diffuser with 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 103 "HUBBELL"-DUAL Cat No. DSS-A-70S- No. 300.00 E K 53
IPE-3/DSS-A-125C-IPE-3 with 70W high
pressure sodium lamp/70W CDM coolwhite
or 70W metal halide lamp
K 104 "HUBBELL"-DUAL Cat No. DSS-A-70S- No. 250.00 E K 251
IPE-3/DSS-A-125C-IPE-3 with 60/65W
coolwhite/daylight spiral compact
fluorescent lamp
K 105 "INDALUX" QUEBEC 150-IQC/IQV with No. 556.00 E K 54
aluminium canopy, flat glass/frosted
polycarbonate diffuser and 70W SON or
70W CDM coolwhite or 70W metal halide
lamp
ID : KMC/iy/ElecWorks (FY2012).xls (70) (21.10.2011) (May/147-3)
SOR Page 71
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 106 "INDALUX" QUEBEC 150-IQC/IQV with No. 506.00 E K 252
aluminium canopy, flat glass/frosted
polycarbonate diffuser and 60/65W
coolwhite/daylight spiral compact
fluorescent lamp
K 107 "INDALUX" 150-IJP post top luminaire, No. 662.00 E K 55
L-3071 aluminium spun cover, gravity-cast
L-2520 aluminium alloy attachement, spun
aluminium control gear embellser,
troncopyramidal specular and hammered
aluminium lateral reflector, hemispherical
clear thermoformed UV stabilized
polycarbonate diffuser with 70W SON or
70W CDM coolwhite or 70W metal halide
lamp
K 108 "INDALUX" 150-IJP post top luminaire, No. 612.00 E K 253
L-3071 aluminium spun cover, gravity-cast
L-2520 aluminium alloy attachement, spun
aluminium control gear embellser,
troncopyramidal specular and hammered
aluminium lateral reflector, hemispherical
clear thermoformed UV stabilized
polycarbonate diffuser with 60/60W
coolwhite/daylight self ballasted high
power compact fluorescent lamp
K 109 INDALUX 150-IQC-M post top luminaire, No. 622.00 E K 56
die-cast aluminium body finished textured
black, reflector of hydro-formed anodised
aluminium with a textured finish lenticular
polycarbonate diffuser with 1 x 70W SON
or 70W CDM coolwhite or 70W metal halide
lamp (IP55)
K 110 INDALUX 150-IQC-M post top luminaire, No. 572.00 E K 254
die-cast aluminium body finished textured
black, reflector of hydro-formed anodised
aluminium with a textured finish lenticular
polycarbonate diffuser with 60/65W
coolwhite/daylight self ballasted high
power compact fluorescent lamp
K 111 "INDALUX" IJM post top classical No. 827.00 E K 57
luminaire, gravity-cast L-2520 aluminium
body in a single piece, identical hinged
aluminium alloy upper cover hydro-formed
anodised aluminium reflector, 4mm
tempered sodium-calcium glass bowl
and 70W SON or 70W CDM coolwhite
or 70W metal halide lamp
K 112 "INDALUX" IJM post top classical No. 777.00 E K 255
luminaire, gravity-cast L-2520 aluminium
body in a single piece, identical hinged
aluminium alloy upper cover hydro-formed
anodised aluminium reflector, 4mm
tempered sodium-calcium glass bowl
and 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (71) (21.10.2011) (May/147-3)
SOR Page 72
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 113 "INDALUX" 250-IJB-PK with clear No. 498.00 E K 58
polycarbonate/methacrylate diffuser and
70W SON or 70W CDM coolwhite or
70W metal halide lamp
K 114 "INDALUX" 250-IJB-PK with clear No. 448.00 E K 256
polycarbonate/methacrylate diffuser and
60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 115 INDALUX DOMUS IJX-SMT decorative No. 605.00 E K 188
post top lantern, high impact injected
methacrylate inner prismatic diffuser,
hydroformed and anodized 99.85% pure
aluminium facetted reflector, injected
aluminium attachment c/w integral
control gear and 70W CDM coolwhite or
70W metal halide lamp
K 116 INDALUX DOMUS IJX-SMT decorative No. 555.00 E K 257
post top lantern, high impact injected
methacrylate inner prismatic diffuser,
hydroformed and anodized 99.85% pure
aluminium facetted reflector, injected
aluminium attachment c/w integral
control gear and 60/65W coolwhite/
daylight self ballasted high power
compact fluorescent lamp
K 117 "I-SUPPREME" with die cast aluminium No. 341.00 E K 62
support, internal aluminium reflector,
impact resistant acrylic conical prismatic
diffuser and spinned aluminium top
canopy, 1 x 70W sodium or 70W CDM
coolwhite or 70W metal halide lamp
K 118 "I-SUPPREME" with die cast aluminium No. 291.00 E K 258
support, internal aluminium reflector,
impact resistant acrylic conical prismatic
diffuser and spinned aluminium top
canopy, 60/65W coolwhite/daylight
self ballasted high power
compact fluorescent lamp
K 119 "KL LICHT" TRAPEZ 5017 with 70W No. 690.00 E K 63
SON or 70W CDM coolwhite or 70W metal
halide lamp, body in cast aluminium and
clear, frosted or opal UV stabilized
polycarbonate diffuser
50-60 dia.
530
405
60
50-60 dia.
530
405
60
ID : KMC/iy/ElecWorks (FY2012).xls (72) (21.10.2011) (May/147-3)
SOR Page 73
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 120 "KL LICHT" TRAPEZ 5017 with 60/65W No. 640.00 E K 259
coolwhite/daylight self ballasted high
power compact fluorescent lamp,
body in cast aluminium and clear,
frosted or opal UV stabilized
polycarbonate diffuser
K 121 "KL LIGHT" TRAPEZ 5042 with 80W metal No. 775.00 E K 64
halide lamp
K 122 "KL LICHT" TRAPEZ 5082 with 70W No. 977.80 E K 65
SON or 70W CDM coolwhite or 70W
metal halide lamp, body in cast
aluminium and clear, frosted
or opal UV-stabilized polycarbonate
diffuser
K 123 "KL LICHT" TRAPEZ 5082 with 60/65W No. 927.80 E K 260
coolwhite/daylight self ballasted high
power compact fluorescent lamp,
body in cast aluminium and clear,
frosted or opal UV-stabilized
polycarbonate diffuser
K 124 "KL LICHT" MODUL 6110/6113, No. 1,019.20 E K 66
ZYLINDER-QUADRO 1716.125/1718.125
with 70W SON or 70W CDM coolwhite or
70W metal halide lamp, body and top cover
in cast aluminium and clear/ frosted/
cylindrical/opal UV-stabilized polycarbonate
diffuser
K 125 "KL LICHT" MODUL 6110/6113, No. 969.20 E K 261
ZYLINDER-QUADRO 1716.125/1718.125
with 60/65W coolwhite/daylight spiral
compact fluorescent lamp, body and top
cover in cast aluminium and clear/ frosted/
cylindrical/opal UV-stabilized polycarbonate
diffuser
K 126 NA "LASCON" SKYLINE 3N with clear or opal No. 530.00 E K 67
diffuser and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 127 NA "LASCON" SKYLINE 3N with clear or opal No. 480.00 E K 262
diffuser and 60/65W coolwhite/daylight
spiral compact fluorescent lamp
K 128 NA "LOUIS POULSEN" KIPP-5747-298-811 No. 981.00 E K 68
with 70W SON or 70W CDM coolwhite or
70W metal halide lamp
K 129 NA "LOUIS POULSEN" KIPP-5747-298-811 No. 930.00 E K 263
with 60/65W coolwhite/daylight spiral
compact fluorescent lamp
K 130 NA "LOUIS POULSEN" ORBITER POLE MINI No. 1,201.80 E K 69
5747902437 with 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
ID : KMC/iy/ElecWorks (FY2012).xls (73) (21.10.2011) (May/147-3)
SOR Page 74
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 131 NA "LOUIS POULSEN" ORBITER POLE MINI No. 1,151.80 E K 264
5747902437 with 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 132 NA "LOTHUS" CHOPIN 022 with polycarbonate No. 1,171.80 E K 70
diffuser and 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 133 NA "LOTHUS" CHOPIN 022 with polycarbonate No. 1,121.80 E K 265
diffuser and 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 134 NA "LUMEC" Cat no. L80 with 70W high No. 1,111.60 E K 71
pressure sodium/70W CDM coolwhite or
70W metal halide lamp and polycarbonate
diffuser
K 135 NA "LUMEC" Cat no. L80 with 60/65W No. 1,061.60 E K 266
coolwhite/daylight spiral compact
fluorescent lamp and polycarbonate
diffuser
K 136 LIGMAN 20581 indirect light post top No. 980.00 E K 189
luminaire c/w die cast aluminium
housing with high corrosion resistance,
white painted aluminium reflector on
the top luminaire, stainless steel
screws, anodized high purity
aluminium reflector, remote control
gear and 1 x 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 137 LIGMAN 20581 indirect light post top No. 930.00 E K 267
luminaire c/w die cast aluminium
housing with high corrosion resistance,
white painted aluminium reflector on
the top luminaire, stainless steel
screws, anodized high purity
aluminium reflector, remote control
gear and 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 138 NA "MARLIN" SKYLINE SKYC 7012N with No. 685.00 E K 72
70W SON or 70W coolwhite or 70W metal
halide lamp high temperature
plastic diffuser and stainless steel louvre
K 139 NA "MARLIN" SKYLINE SKYC 7012N with No. 635.00 E K 268
60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp high temperature
plastic diffuser and stainless steel louvre
K 140 NA "NORAL" CONSUL/DSLD/EXPO IV with No. 685.60 E K 76
70W SON or 70W CDM coolwhite or 70W
metal halide lamp and clear/opalescent
acrylic/polycarbonate diffuser and
asymmetrical/symmetrical reflector
K 141 NA "NORAL" CONSUL/DSLD/EXPO IV with No. 635.60 E K 269
60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp and clear/opalescent
acrylic/polycarbonate diffuser and
asymmetrical/symmetrical reflector
ID : KMC/iy/ElecWorks (FY2012).xls (74) (21.10.2011) (May/147-3)
SOR Page 75
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 142 Moonlight Diva post top lantern c/w No. 810.00 E K 190
integral gear & 70W SON or 70W CDM
coolwhite, 70W metal halide lamp,
60/65W self ballasted high power
compact fluorescent lamp.
Corrosion resistant die-
cast aluminium optical housing with
stainless steel screws, durable silicone
rubber gaskets and tempered safety
glass (IP65)
K 143 Moonlight Nova post top lantern c/w No. 870.00 E K 191
integral gear 70W SON or 70W CDM
coolwhite, 70W metal halide lamp,
60/65W spiral compact fluorescent
lamp.
Corrosion resistant die-cast
aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 144 Moonlight Olympic post top lantern c/w No. 950.00 E K 192
integral gear 1x70 metal halide, or 70W
SON or CDM coolwhite lamp, 60W/65W
self ballasted high power compact
fluorescent lamp.
Corrosion resistant die-cast
aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 145 Moonlight Santa post top lantern c/w No. 700.00 E K 193
integral gear 1x70 metal halide, 70W
CDM coolwhite 60W/65W self ballasted
high power compact fluorescent lamp.
Corrosion resistant die-cast
aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and clear acrylic diffuser
(IP54). High efficiency optical system in
vertical lamp. Aluminium lourve system
providing glare control
K 146 Moonlight Terra post top lantern c/w No. 600.00 E K 194
integral gear 1x70 metal halide, 70W
CDM coolwhite 60W/65W self ballasted
high power compact fluorescent lamp.
Corrosion resistant die-cast
aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and clear acrylic diffuser
(IP54). High efficiency optical system in
vertical lamp. Aluminium lourve system
providing glare control
K 147 Moonlight Ultra post top lantern c/w No. 1,680.00 E K 195
integral gear 1x70 metal halide, 70W
SON or, 70W CDM coolwhite lamp,
60W/65W self ballasted high power
compact fluorescent lamp.
Corrosion resistant die-cast
aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and clear acrylic diffuser
(IP65)
ID : KMC/iy/ElecWorks (FY2012).xls (75) (21.10.2011) (May/147-3)
SOR Page 76
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 148 Moonlight Elegant indirect post top No. 1,350.00 E K 196
lantern c/w integral gear 1x150W metal
halide lamp. Corrosion resistant die-
cast aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 149 Moonlight Futura indirect post top No. 1,500.00 E K 197
lantern c/w integral gear 1x150W metal
halide lamp. Corrosion resistant die-
cast aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 150 Moonlight Merlot indirect post top No. 1,500.00 E K 198
lantern c/w integral gear 1x150W metal
halide lamp. Corrosion resistant die-
cast aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 151 Moonlight Metropolian indirect post top No. 1,800.00 E K 199
lantern c/w integral gear 1x150W metal
halide lamp. Corrosion resistant die-
cast aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 152 Moonlight Tecna indirect post top No. 1,450.00 E K 200
lantern c/w integral gear 1x150W metal
halide lamp. Corrosion resistant die-
cast aluminium optical housing with
stainless steel screws, durable silicon
rubber gaskets and tempered safety
glass (IP65)
K 153 Moonlight digna 1 x 36W 726 lamp c/w No. 850.00 E K 201
corrosion resistant extruded aluminium
profile. Direct lighting system with two
sided light output IP54
ID : KMC/iy/ElecWorks (FY2012).xls (76) (21.10.2011) (May/147-3)
SOR Page 77
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 154 Moonlight aura mega 1 x 70W HIT lamp No. 1,400.00 E K 202
c/w corrosion resistant extruded
aluminium profile. Direct lighting
system with three sided light output
IP44
K 155 Moonlight era 1 x 70W HIT lamp c/w No. 1,300.00 E K 203
corrosion resistant extruded aluminium
profile. Direct lighting system with four
sided light output IP44
K 156 Moonlight Lana 2 x 18W T26 lamp c/w No. 1,200.00 E K 204
corrosion resistant extruded aluminium
profile. Direct lighting system with two
sided light output IP44
K 157 NA "PGL" CARANDINI DQM-400/DQF-400 No. 297.00 E K 77
polycarbonate opal/clear/smoke diffuser,
400mm dia. spherical lantern with 70W
metal halide or 70W CDM coolwhite
K 158 NA "PGL" CARANDINI DQM-400/DQF-400 No. 247.00 E K 243
polycarbonate opal/clear/smoke diffuser,
400mm dia. spherical lantern with 60W/
65W self ballasted high power compact
fluorescent lamp
K 159 NA "PGL" CARANDINI ML-250/TS 650 x No. 369.00 E K 78
590mm/332 x 588mm cylinder clear
lantern aluminium plate top canopy with
70W SON or 70W CDM coolwhite or
70W metal halide
K 160 NA "PGL" CARANDINI ML-250/TS 650 x No. 319.00 E K 244
590mm/332 x 588mm cylinder clear
lantern aluminium plate top canopy with
60W/65W self ballasted high power
compact fluorescent lamp
K 161 NA "PHILIPS" Cat No. SPP 133/HPP No. 352.00 E K 79
133/SPP 133 PCT with opal-white/frosted
polycarbonate sphere and 70W
SON or 70W CDM coolwhite or 70W
metal halide
K 162 NA "PHILIPS" Cat No. SPP 133/HPP No. 302.00 E K 245
133/SPP 133 PCT with opal-white/frosted
polycarbonate sphere and 60W/65W
self ballasted high power compact
fluorescent lamp
K 163 NA "PILOTINE" with 70W SON or 70W CDM No. 378.30 E K 80
coolwhite or 70W metal halide
K 164 NA "PILOTINE" with 60W/65W self ballasted No. 328.30 E K 246
high power compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (77) (21.10.2011) (May/147-3)
SOR Page 78
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 165 "PRISMA" KONOS PARK 38 with 70W No. 608.20 E K 81
metal halide/70W SON lamp and
ice-etched high impact acrylic diffuser
K 166 NA "RAAK" ELIPSE cat no. S-2389.1321 with No. 562.60 E K 82
70W SON lamp
K 167 NA "RAAK" KOSMOS 430mm diameter No. 697.00 E K 83
lantern Cat No. S2280.8000/S2280.7000
with 80W metal halide/70W SON lamp
K 168 NA "RAAK" OCTAHEDRON S-2387.1321 with No. 898.20 E K 84
70W SON/70W metal halide lamp
K 169 "RAGNI" RAMATUELLE 38 with 70W CDM No. 795.00 E K 85
coolwhite or 70W metal halide lamp c/w
methacrylate diffuser
K 170 "RAGNI" THAIS Cat No. PR0550 with No. 599.00 E K 86
70W SON or 70W CDM coolwhite or
70W metal halide and
clear/frosted polycarbonater/
methacrylate diffuser
K 171 "RAGNI" THAIS Cat No. PR0550 with No. 549.00 E K 270
60/65W coolwhite/daylight self ballasted
high power compact fluorescent lamp
and clear/frosted polycarbonater/
methacrylate diffuser
K 172 NA "ROGER PRADIER" PV4 with body of No. 509.00 E K 87
aluminium with special treatment against
corrosion, opal or smoked makrolon
diffuser and 70 SON or 70W CDM coolwhite
or 70W metal halide
K 173 NA "ROGER PRADIER" PV4 with body of No. 459.00 E K 271
aluminium with special treatment against
corrosion, opal or smoked makrolon
diffuser and 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 174 NA "SEDONA" 22A 10 FIN post top double No. 2,110.00 E K 88
lantern housing of extruded aluminium with
tempered glass lens, double arm bracket
and 2 x 125W metal halide lamp
K 175 NA "SELUX" Cat No. SX 616-10-2/SX 616-11-2 No. 1,077.00 E K 89
with clear polycarbonate diffuser,
asymmetrical/symmetrical reflector and
70W - 150W SON/CDM coolwhite or metal
halide lamp
ID : KMC/iy/ElecWorks (FY2012).xls (78) (21.10.2011) (May/147-3)
SOR Page 79
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 176 NA "SELUX" Cat No. SX 616-10-2/SX 616-11-2 No. 1,027.00 E K 272
with clear polycarbonate diffuser,
asymmetrical/symmetrical reflector and
60/65W coolwhite/daylight self ballasted
high power compact fluorescent lamp
K 177 NA "SELUX" Cat no. SX480-11-2/SX480-12-2/ No. 1,009.80 E K 90
SX480-19-2/SX480-14-2/SX-15-2/
SX480-20-2/SX480-17-2/SX480-18-2/
SX480-21-2 with clear cylindrical
diffuser, white/mirror louvre/MRT 150
reflector with 70W SON or 70W CDM
coolwhite or 70W metal halide lamp
K 178 NA "SELUX" Cat no. SX480-11-2/SX480-12-2/ No. 959.80 E K 273
SX480-19-2/SX480-14-2/SX-15-2/
SX480-20-2/SX480-17-2/SX480-18-2/
SX480-21-2 with clear cylindrical
diffuser, white/mirror louvre/MRT 150
reflector with 60/65W coolwhite/daylight
self ballasted high power compact
fluorescent lamp
K 179 NA "SELUX" HISTO Cat no. SX635-10-2/ No. 1,009.80 E K 91
SX635-11-2/SX635-12-2 with sand-blasted
polycarbonate diffuser, white/mirror
louvre/MTR 150 refractor and curved steel
bracket with 70W SON/2 x 70W
metal halide lamp
K 180 NA "SELUX" SX 470-20-2 post top single unit No. 1,086.00 E K 92
luminaire in black finishing with clear
cylindrical polycarbonate diffuser clear
mirror louvre, cast aluminium filter,
1 x 125W metal halide lamp
ID : KMC/iy/ElecWorks (FY2012).xls (79) (21.10.2011) (May/147-3)
SOR Page 80
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 181 "SIEMENS" AURIS post-top luminaire with No. 620.00 E K 93
PMMA housing, screwed-on aluminium
canopy (5NA 485 2-1AA1),
70W metal halide or 70W
CDM coolwhite lamp
K 182 "SIEMENS" AURIS post-top luminaire with No. 570.00 E K 283
PMMA housing, screwed-on aluminium
canopy (5NA 485 2-1AA1), 60W/65W
self ballasted high power compact
fluorescent lamp
K 183 "SIEMENS" CITYLIGHT PLUS cat no. No. 1,092.20 E K 94
5NA-5262-1C of die-cast cast aluminium
housing, pagoda specular reflector system
and acrylic diffuser with 70W metal halide
or 70W CDM coonwhite lamp
K 184 "SIEMENS" CITYLIGHT PLUS cat no. No. 1,042.20 E K 284
5NA-5262-1C of die-cast cast aluminium
housing, pagoda specular reflector system
and acrylic diffuser with 60W/65W
self ballasted high power compact
fluorescent lamp
K 185 "SIEMENS" CITYLIGHT CLASSIC with No. 1,212.50 E K 95
sturdy glass enclosures, cast iron post-
top section cover by an elegant plastic
flange shape collar 70W SON/70W
metal halide lamp
K 186 "SIEMENS" CITYLIGHT ELEGANCE with No. 1,212.50 E K 96
sturdy glass enclosures, cast iron post-
top section cover by an elegant plastic
flange shape collar 70W SON or 70W
metal halide or 70W CDM coolwhite lamp
K 187 "SIEMENS" CITYLIGHT ELEGANCE with No. 1,162.50 E K 285
sturdy glass enclosures, cast iron post-
top section cover by an elegant plastic
flange shape collar 60W/65W
self ballasted high power compact
fluorescent lamp
K 188 NA "SIEMENS" Cat 5NA 7482-ICKO/ No. 619.00 E K 97
7482-3UKO with built in 70W metal
halide or 70W CDM coolwhite lamp
K 189 NA "SIEMENS" Cat 5NA 7482-ICKO/ No. 569.00 E K 286
7482-3UKO with built in 60W/65W
self ballasted high power compact
fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (80) (21.10.2011) (May/147-3)
SOR Page 81
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 190 "STERNER" FRANKLYN III Cat No. No. 940.00 E K 98
FK20-10-3-N of extruded aluminium
construction with clear tempered lens,
performance aluminium reflector and
70W SON or 70W metal halide or
70W CDM coolwhite lamp
K 191 "STERNER" FRANKLYN III Cat No. No. 890.00 E K 287
FK20-10-3-N of extruded aluminium
construction with clear tempered lens,
performance aluminium reflector and
60W/65W self ballasted high power
compact fluorescent lamp
K 192 "STERNER" SEDONA Cat No. No. 996.00 E K 99
SED22-10FT with 70W metal haldie or
70W CDM coolwhite lamp
K 193 "STERNER" SEDONA Cat No. No. 946.00 E K 288
SED22-10FT with 60W/65W
self ballasted high power
compact fluorescent lamp
K 194 "STERNER" MANCHESTER of aluminium No. 952.00 E K 100
extrusion construction with powder coat
finish, clear lens, IES type II
performance reflector, straight arm and
70W SON or 70W metal halide or 70W
CDM coolwhite lamp
K 195 "STERNER" MANCHESTER of aluminium No. 902.00 E K 289
extrusion construction with powder coat
finish, clear lens, IES type II
performance reflector, straight arm and
60W/65W self ballasted high power
compact fluorescent lamp
K 196 "STERNER" MARQUETTE of No. 991.30 E K 101
aluminium extrusion construction, with
powder coat finish, clear lens,
IES Type II performance reflector,
straight arm and 70W SON or
or 70W metal halide or 70W
CDM coolwhite lamp
K 197 "STERNER" MARQUETTE of No. 941.30 E K 290
aluminium extrusion construction, with
powder coat finish, clear lens,
IES Type II performance reflector,
straight arm and 60W/65W
self ballasted high power
compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (81) (21.10.2011) (May/147-3)
SOR Page 82
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 198 "STERNER" SIERRA of aluminium No. 991.30 E K 102
extrusion construction with powder coat
finish, clear lens, IES Type II Horz
performance reflector, straight arm and
70W SON or 70W metal halide or 70W
CDM coolwhite lamp
K 199 "STERNER" SIERRA of aluminium No. 941.30 E K 291
extrusion construction with powder coat
finish, clear lens, IES Type II Horz
performance reflector, straight arm and
60W/65W self ballasted high power
compact fluorescent lamp
K 200 "THORN" LEMNIS CITY SCAPE QGH No. 685.00 E K 103
decorative post top lantern with 70W
SON or 70W metal halide or 70W
CDM coolwhite lamp
K 201 "THORN" LEMNIS CITY SCAPE QGH No. 635.00 E K 292
decorative post top lantern with
60W/65W self ballasted high power
compact fluorescent lamp
K 202 "THORN" JOHANNA QGJ 1070-4/7351 No. 454.00 E K 104
with 50W - 70W SON or 70W metal halide
or 70W CDM coolwhite lamp
K 203 "THORN" JOHANNA QGJ 1070-4/7351 No. 404.00 E K 293
with 60W/65W self ballasted high power
compact fluorescent lamp
K 204 "THORN" EUROPHANE Cat No. LEMNIS No. 668.00 E K 106
RIS 701 with 70W SON or 70W metal
halide or 70W CDM coolwhite lamp
K 205 "THORN" EUROPHANE Cat No. LEMNIS No. 618.00 E K 294
RIS 701 with 60W/65W self ballasted
high power compact fluorescent lamp
K 206 "THORN" EUROPHANE twin luminaire No. 1,271.70 E K 107
with polycarbonate/methcrylate diffuser
and 70W metal halide or 70W CDM
coolwhite lamp
K 207 "THORN" EUROPHANE twin luminaire No. 1,221.70 E K 295
with polycarbonate/methcrylate diffuser
and 60W/65W self ballasted
high power compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (82) (21.10.2011) (May/147-3)
SOR Page 83
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 208 "THORN" AVENUE XL with 70W SON No. 1,011.70 E K 108
or 70W metal halide or 70W CDM
coolwhite lamp
K 209 "THORN" AVENUE XL with 60W/65W No. 961.70 E K 296
spiral compact fluorescent lamp
K 210 "VINIC" 41305/41405 decorative post top No. 820.00 E K 109
luminaire, vandal and corrsion resistant
die cast aluminium alloy body, U.V.
stabilized opal/clear polycarbonate
diffuser, anodised high purity aluminium
reflector and 70W SON or 70W metal
halide or 70W CDM coolwhite lamp
K 211 "VINIC" 41305/41405 decorative post top No. 770.00 E K 297
luminaire, vandal and corrsion resistant
die cast aluminium alloy body, U.V.
stabilized opal/clear polycarbonate
diffuser, anodised high purity aluminium
reflector and 60W/65W self ballasted
high power compact fluorescent lamp
K 212 "VINIC" 42006 decorative post top No. 820.00 E K 110
luminaire, corrosion resistant die cast
auminium alloy body, U.V. stabilized high
impact acrylic diffuser, white powder
coated aluminium stepped reflector with
70W SON or 70W metal halide or
70W CDM coolwhite lamp
K 213 "VINIC" 42006 decorative post top No. 770.00 E K 298
luminaire, corrosion resistant die cast
auminium alloy body, U.V. stabilized high
impact acrylic diffuser, white powder
coated aluminium stepped reflector with
60W/65W self ballasted high power
compact fluorescent lamp
K 214 "JASLITE" D37 Post Top Lantern, IP55, No. 370.00 E K 274
dustproof and jetproof. Die-cast aluminium
body and canopy. Acrylic Diffuser. Durable
and weathproof rubber gasket.
Powdercoated in black RAL9004 or any
other standard RAL colour. (Anodized high
purity aluminium reflector, chemically
brightened, c/w 70W SON/125 mercury
lamp)
ID : KMC/iy/ElecWorks (FY2012).xls (83) (21.10.2011) (May/147-3)
SOR Page 84
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 215 NA "VULKAN" Cat No. 8466 with 70W SON No. 1,064.00 E K 111
or 70W metal halide or 70W CDM
coolwhite lamp
K 216 NA "VULKAN" Cat No. 8466 with 60W/65W No. 1,014.00 E K 299
spiral compact fluorescent lamp
K 217 "Ingo" BT170 decorative post top in cast No. 585.00 E K 275
aluminium with prismatic diffuser and
1 X 70W high pressure sodium lamp/ 125W
mercury super deluxe lamp and integral
control gear
K 218 "WE-EF" SK409-E-80/125 MV(K), No. 330.00 E K 112
SK409-E-70/NI(K) 400mm dia spherical
opal polyethylene luminaire with
corrosion resistant die-cast aluminium
alloy base, heat shield and 70W
metal halide or 70W CDM coolwhite lamp
K 219 "WE-EF" SK409-E-80/125 MV(K), No. 280.00 E K 300
SK409-E-70/NI(K) 400mm dia spherical
opal polyethylene luminaire with
corrosion resistant die-cast aluminium
alloy base, heat shield and 60W/65W
self ballasted high power compact
fluorescent lamp
K 220 "Ingo" LPH8402 decorative post top in cast No. 450.00 E K 276
aluminium with tempered glass diffuser and
1 X 70W high pressure sodium lamp/ 125W
mercury super deluxe lamp and integral
control gear
K 221 "Ingo" YS/FYZT8430 decorative post top in No. 440.00 E K 277
cast aluminium with tempered glass diffuser
and 1 X 70W high pressure sodium lamp/
125W mercury super deluxe lamp and
integral control gear
ID : KMC/iy/ElecWorks (FY2012).xls (84) (21.10.2011) (May/147-3)
SOR Page 85
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 222 NA "WE-EF" SK459-E-80/125MV(K), No. 360.00 E K 113
SK459-E-70/N1(K) 450mm dia spherical
opal polyethylene luminaire with corrosion
resistant die-cast aluminium alloy base,
heat shield and 70W metal halide or
70W CDM coolwhite lamp
K 223 NA "WE-EF" SK459-E-80/125MV(K), No. 310.00 E K 301
SK459-E-70/N1(K) 450mm dia spherical
opal polyethylene luminaire with corrosion
resistant die-cast aluminium alloy base,
heat shield and 60W/65W self ballasted
high power compact fluorescent lamp
K 224 "WE-EF" SKF450-E-80/125MV(K), No. 501.80 E K 114
SKF450-E-70/N1(K) 450mm dia. frosted
or clear polycarbonate spherical luminaine
with corrosion resistant die-cast aluminium
alloy base, heat shield and 70W metal
halide or 70W CDM coolwhite lamp
K 225 "WE-EF" SKF450-E-80/125MV(K), No. 451.80 E K 302
SKF450-E-70/N1(K) 450mm dia. frosted
or clear polycarbonate spherical luminaine
with corrosion resistant die-cast aluminium
alloy base, heat shield and 60W/65W
self ballasted high power compact
fluorescent lamp
K 226 "WE-EF" SKL400-E-80/125MV(K), No. 487.00 E K 115
SKL400-E-70/N1(K) 400mm dia. spherical
clear polycarbonate luminaire with
corrosion resistant die-cast aluminium
alloy base, anodized high purity
aluminium reflector and 70W metal
halide or 70W CDM coolwhite lamp
K 227 "WE-EF" SKL400-E-80/125MV(K), No. 437.00 E K 303
SKL400-E-70/N1(K) 400mm dia. spherical
clear polycarbonate luminaire with
corrosion resistant die-cast aluminium
alloy base, anodized high purity
aluminium reflector and 60W/65W
self ballasted high power compact
fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (85) (21.10.2011) (May/147-3)
SOR Page 86
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 228 "WE-EF" ZA600-E-70/N1(K) or No. 900.00 E K 116
500-E-70/N1(K) with corrosion resistant
die-cast aluminium alloy body and
canopy, diffuser or UV stabilized and
vandal resistant polycarbonate, anodized
high purity aluminium reflector and
70W sodium lamp
K 229 "WE-EF" ASP 504-E-70/NI [K] pendent No. 837.00 E K 117
mounted lantern with corrosion resistant
die-cast aluminium alloy body, diffuser
of UV stabilized and Polycarbonate Clear-
Patterned equipped with glare restriction
and light control reflectors and 70W
sodium lamp and pole bracket
K 230 "WE-EF" ZA600-E-80/125(K) with No. 920.30 E K 118
corrosion resistant die-cast aluminium
alloy body and canopy, UV stabilized and
vandal resistant polycarbonate diffuser
and anodized high purity aluminium
reflector and 70W metal halide or 70W
CDM coolwhite lamp
K 231 "WE-EF" ZA600-E-80/125(K) with No. 850.00 E K 304
corrosion resistant die-cast aluminium
alloy body and canopy, UV stabilized and
vandal resistant polycarbonate diffuser
and anodized high purity aluminium
reflector and 60W/65W self ballasted
high power compact fluorescent lamp
K 232 "WE-EF" 01.ALY359-DT-18/26(I) with No. 534.20 E K 119
corrosion resistant aluminium alloy body,
bracket and post, polycarbonate UV
stabilized and vandal resistant diffuser
and 18W/26W PLC lamp and finish in RAL
polyester power coat
ID : KMC/iy/ElecWorks (FY2012).xls (86) (21.10.2011) (May/147-3)
SOR Page 87
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 233 "WE-EF" LSA050-E-50/80 No. 716.00 E K 120
IP55/LSA050-E-70/H IP55/
LSA050-E-50/70/NI IP55 lightspike
dustproof and jetproof conforming to DIN,
VDE, IEC.Class1. Corrosion resistant
die-cast aluminium and vandal resistant.
Weatherproof and durable silicone rubber
gasket. Anodized high purity aluminium
reflector and 50W - 70W sodium lamp/
70W CDM coolwhite or 70W
metal halide
K 234 "WE-EF ASP509-E-80/125/ASP509-E-70 No. 1,100.00 E K 121
decorative posttop Intern IP55, in
corrosion resistant die-cast aluminium
alloy body. Diffuser made from UV
stabilized and vandal resistant
polycarbonate, anodized high purity
aluminium reflector and 70W SON,
70W CDM coolwhite or 70W metal halide.
Finish in RAL black power coat polyester
paint and 12A1500/76 mounting bracket
only
K 235 "WE-EF" CA504-E-80/125(K) or No. 569.40 E K 122
50/70/NI(K) with corrosion resistant
aluminium alloy body, polycarbonate
diffuser and vandal resistant, anodized
high purify aluminium reflector,
chemically brightened, complete with 70W
SON, 70W CDM coolwhite or 70W metal
halide and KC1.76 adapter, BA1/720.76
bracket and finish in RAI polyester
powder coat
K 236 "WE-EF" BSP704/504-E-80/125(K) or No. 1,074.80 E K 123
50/70/ N1(K) with corrosion resistant
aluminium alloy body and canopy,
UV stabilized and vandal resistant
polycarbonate diffuser, anodized high
purity aluminium reflector and 70W SON,
70W CDM coolwhite or 70W metal halide
and BA1/420.76 or 580.76 bracket and
finish in RAL polyester powder coat
ID : KMC/iy/ElecWorks (FY2012).xls (87) (21.10.2011) (May/147-3)
SOR Page 88
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 237 "WE-EF" area light luminaire No. 489.40 E K 124
SBL100-E-50/70/NI(K) or
SBL100-E-80/125(K) with corrosion
rsistant aluminium alloy body, thermal
shock resistant safety glass in a hinged
aluminium frame and stainless steel
fasteners, anodized high purity chemically
brightened aluminium refelctor and 70W
SON, 70W CDM coolwhite or 70W metal
halide and KS1.76 adaptor and finish in RAL
polyester powder coat
K 238 NA "2K KEMPE & KLAUS" SCHWABENI No. 1,166.90 E K 125
Cat No. 6803021 or SERIE SCHWABEN
II PE 6803320 with 70W SON, 70W CDM
coolwhite or 70W metal halide and UV
stabilized clear polycarbonate diffuser
K 239 NA "2K KEMPE & KLAUS" SERIE No. 1,208.60 E K 126
SCHWABEN II PE 6803320 with 70W SON,
70W CDM coolwhite or 70W metal halide
and UV stabilize clear polycarbonate
diffuser
K 240 NA "2K KEMPE & KLAUS" SERIE No. 1,249.40 E K 127
SCHWABEN II PE 6803320 with 70W SON,
70W CDM coolwhite or 70W metal halide
and UV stabilize clear polycarbonate
diffuser
K 241 NA "2K KEMPE & KLAUS" PARK Cat No. No. 969.00 E K 128
6800600 with 70W SON, 70W CDM
coolwhite or 70 W metal halide
and UV stabilize clear polycarbonate
diffuser
K 242 NA "2K KEMPE & KLAUS" GMBH SERIE No. 1,750.00 E K 129
REICHENBACH code 6805101 single
arm mounted luminaire with 70W high
pressure sodium lamp and clear
polycarbonate diffuser IP54
K 243 NA "2K KEMPE & KLAUS" GMBH SERIE No. 1,720.00 E K 130
REICHENBACH code 6805101 single
arm mounted laminaire with 70W SON,
70W CDM coolwhite or 70W metal halide
and clear polycarbonate diffuser IP54
K 244 NA "2K KEMPE & KLAUS" GMBH SERIE No. 3,320.00 E K 131
REICHENBACH code 6805101 twin arm
mounted luminaire with 2 (1 x 125W) metal
halide lamp and clear polycarbonate
diffuser IP54
K 245 "3E" AMANDINE D500 MRL/D700MRL/ No. 800.70 E K 132
MRV with 70W SON, 70W CDM coolwhite
or 70W metal halide and clear/pearl/opal
methacrylate diffuser and single arm
bracket
ID : KMC/iy/ElecWorks (FY2012).xls (88) (21.10.2011) (May/147-3)
SOR Page 89
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 246 "3E AMANDINE" D700 (ORCHIDEE) No. 850.00 E K 133
decorative post top luminaire with clear
diffuser and 70W SON lamp
K 247 "3E" AMANDINE D500 MRL/D700 MRL No. 861.40 E K 134
with 70W SON, 70W CDM coolwhite or
70W metal halide and clear/pearl/opal
methacrylate diffuser and single arm bracket
K 248 "3E" AMANDINE MRV with 70W SON, No. 881.70 E K 135
70W CDM coolwhite or 70W metal
clear/pearl/opal methacrylate diffuser
and single arm bracket
K 249 "3E" COBRA FDL-D2/VP/VB/VM/VG with No. 1,152.40 E K 136
clear/pearl/opal methacrylate diffuser, 70W
SON, 70W CDM coolwhite or 70W metal
halide and separate ignitor and
single arm mounting bracekt
K 250 "3E" COMPASS Cat no. FDL-D2-VP with No. 1,206.70 E K 137
70W high pressure sodium/70W CDM
coolwhite or 70W metal halide, clear/pearl/
opal methacrylate diffuser and single arm
mounting bracket
K 251 "3E" EVASION Cat no. FDL-D2-VP- No. 1,162.10 E K 138
VB-VM-VG with 70W SON, 70W CDM
coolwhite or 70W metal halide, clear/pearl/
opal methacrylate diffuser and single arm
mounting bracket
K 252 "3E" HIRONDELLE FDS-D2-VM/VB/ No. 1,177.60 E K 139
VP/VG with clear/pearl/opal methacrylate
diffuser, 70W CDM coolwhite or 70W
metal halide/70W SON
lamp, seperate ignitor and single arm
mounting bracket
K 253 "3E" LIBELLULE FDL-D2/D-VB/VP/VM/VG No. 1,234.00 E K 140
with clear/pearl/opal methacrylate
diffuser, 70W SON/70W CDM coolwhite or
70W metal halide, separate ignitor, and
single arm mounting bracket
K 254 "3E" PYROS Cat no. FDL-D2-VM with No. 906.00 E K 141
70W high pressure sodium/70W CDM
coolwhite or 70W metal halide,
clear/pearl/opal
methacrylate diffuser and single arm
mounting bracket
ID : KMC/iy/ElecWorks (FY2012).xls (89) (21.10.2011) (May/147-3)
SOR Page 90
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 255 "3E" SYGMA FD-D2-VB/VP/VM/VG with No. 1,206.70 E K 142
clear/pearl/opal methacrylate diffuser,
70W SON/70W CDM coolwhite or 70W
metal halide, separate ignitor and single
arm mounting bracket
STREET LIGHTING'S LANTERN
* The following street lighting lantern
with 70W to 150W high pressure sodium
lamp, and integral compensated control
gear and diffuser (Removal of existing
lantern to be measured
separately) *(256 264)
K 256 "SIEMENS" 5NA392ST50/5NA585 No. 320.00 E K 143
SIOPTAL
K 257 Eye H729 die cast aluminium streetlight pc 390.00 E K 282
with prismatic glass bowl diffuser c/w 70W
150W HPS gear, lamp (IP54)
K 258 NA "PHILIPS" Cat No. SRC501 or No. 208.55 E K 145
SGS 201/070G
K 259 NA "SIEMENS" SRL S70 No. 239.60 E K 146
K 260 "SIEMENS" Cat No. 5NA3322-OS No. 212.40 E K 147
K 261 "THORN" Cat No. QB 79 WNB 1070 No. 184.30 E K 148
K 262 "INDALUX" 125-IVA-P No. 258.00 E K 149
ID : KMC/iy/ElecWorks (FY2012).xls (90) (21.10.2011) (May/147-3)
SOR Page 91
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 263 "INDALUX" VIENTO 150-IVH c/w 70W/ No. 619.00 E K 150
150W SON lamp
K 264 "INDALUX" VIENTO 150-IVH with arm No. 864.00 E K 151
bracket c/w 70W/150W SON lamp
* The following street lighting lantern
complete with 80W to 125W metal halide
lamp and integral compensated control
gear (Removal of existing lantern to be
measured separateyl) :- *(265 267)
K 265 NA "PHILIPS" Cat No. HGS 201 or No. 171.70 E K 152
HRC 510/080-125G
K 266 "SIEMENS" Cat No. 5NA3322-1D No. 212.40 E K 153
K 267 "THORN" Cat No. QB79WB1125 No. 201.80 E K 154
* The following street lighting lantern
complete with 150W high pressure sodium
lamp and integral compensated control
gear (Removal of existing lantern to
be measured separately) :- *(268 277)
K 268 NA "EYE" Cat No. S4/9 No. 548.00 E K 155
K 269 "HUBBELL" Cat No. RMA-3-3/RMD- No. 326.90 E K 156
15S2E-3
K 270 Eyelide s419 die cast aluminium streetlight pc 685.00 E K 281
with thermal resistant glass bowl, high
purity aluminium reflector and built-in 150W
HPS gear, lamp (IP66) pole-top and arm
mounting
K 271 MA "PHILIPS" Cat No. SRC 821/150 or No. 252.20 E K 157
SGS 203/201/150
ID : KMC/iy/ElecWorks (FY2012).xls (91) (21.10.2011) (May/147-3)
SOR Page 92
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 272 "SIEMENS" MRL 6150 THORN QA8 No. 295.00 E K 158
HNB 1150T
K 273 "SIEMENS" Cat No. 5NA 3332-1S/ No. 368.60 E K 159
5NA333-A/MRL 6150
K 274 "INDALUX" 125-IVA-P No. 365.00 E K 160
K 275 "Ingo" SL25 street lamp post with lantern in No. 850.00 E K 278
cast aluminium with tempered glass diffuser
and silver aluminium reflector, 1 X 70W/
150W high pressure sodium lamp and
integral control gear with decorative
Spin single arm bracket
K 276 "Ingo" SL25 street lamp post with lantern in No. 865.00 E K 279
cast aluminium with tempered glass diffuser
and silver aluminium reflector, 1 X 70W/
150W high pressure sodium lamp and
integral control gear with decorative
Ralo single arm bracket
K 277 "Ingo" SL32 street lamp post with lantern in No. 855.00 E K 280
cast aluminium with tempered glass diffuser
and silver aluminium reflector, 1 X 70W/
150W high pressure sodium lamp and
integral control gear with decorative
single arm bracket
REPLACEMENT OF DEFECTIVE
STREET/GARDEN LIGHT COVER BOWLS
* Remove existing defective streetlight
cover bowl, supply and fix new cover bowl
including all accessories for the following
lighting lantern:- *(278 291)
K 278 NA "PHILIPS" Cat No. SRC 821-070G No. 59.30 E K 161
ID : KMC/iy/ElecWorks (FY2012).xls (92) (21.10.2011) (May/147-3)
SOR Page 93
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 279 "THORNS" Cat No. QB 79 WNB 1070 No. 59.95 E K 162
K 280 NA "PHILIPS" Cat No. HGS 201/080-125G or No. 59.30 E K 165
HRC 821/125
K 281 "THORN" Cat No. QB 79 WB 1125 No. 59.95 E K 166
K 282 NA "PHILIPS" Cat No. SGS 203/150G or No. 69.80 E K 168
SRC 821/150
K 283 "FABRIKANT" post top 400mm dia No. 170.70 E K 169
polycarbonate opal white sphere
K 284 NA "WE-EF" SK409 post top 400mm dia No. 140.00 E K 170
polyethylene opal white sphere
K 285 NA "WE-EF" post top 400mm dia No. 170.00 E K 171
polycarbonate clear/frosted/opal white
sphere
K 286 NA "WE-EF" SK post top 450mm dia No. 130.00 E K 172
polyethylene opal white/frosted sphere
K 287 NA "WE-EF" post top 450mm dia No. 180.00 E K 173
polycarbonate opal white/frosted/clear
sphere
K 288 NA 400 mm diameter post-top polycarbonate No. 140.00 E K 174
opal white sphere (other than Fabrikant
& WE-EF)
K 289 NA 400 mm diameter post top polycarbonate No. 152.30 E K 175
clear/smoke sphere (other than fabrikant
and WE-EF)
K 290 NA Post top yellow globe 300mm diameter for No. 160.00 E K 176
zebra crossing
K 291 NA Post top yellow globe 300mm diameter c/w No. 483.00 E K 186
wall bracket, control gear and 100W bulb
LANTERN'S PART/ACCESSORY
K 292 NA Metal base for post top spheric lantern No. 41.00 E K 177
with mounting screws and connections
K 293 NA "WE-EF" die-cast aluminium alloy base, No. 160.00 E K 178
heat shield, 70W SON control gear and
lamp
K 294 NA "FABRIKANT" die cast aluminium alloy No. 179.45 E K 179
base, heat shield, control gear and lamp
ID : KMC/iy/ElecWorks (FY2012).xls (93) (21.10.2011) (May/147-3)
SOR Page 94
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
K 295 NA Timer relay for zebra crossing warning light No. 172.50 E K 187
K 296 NA 3E Diffuser for lampost not exceeding 6m No. 136.85 E K 188
height
* The following parts/accessories are
for 'I-SUPREME' lantern *(297 299)
K 297 NA Top aluminium canopy with mounting knob No. 90.00 E K 180
K 298 NA Conical prismatic diffuser No. 137.00 E K 181
K 299 NA Die cast aluminium base No. 63.00 E K 182
K 300 NA Internal reflector and gear tray Set 42.00 E K 183
K 301 NA Intenal supporting brackets & rods Set 35.00 E K 184
L. LIGHTING COLUMN
REMOVAL OF EXISTING LIGHTING
COLUMN
L 001 NA Remove existing lighting column No. 57.20 E L 1
exceeding 5m height but not exceeding
10m height including bracket, arm and
lantern and dispose off site
L 002 NA Remove existing lighting column up to No. 36.20 E L 2
5m height including bracket,
arm and lantern and dispose off site
TUBULAR SWAGED LIGHTING COLUMN
* Supply, deliver to site and erect tubular
swaged lighting column hot-dipped
galvanised lighting column (planted type
with bitumen or coal tar epoxy coating
internally and externally up to 250mm
above ground) or flange mounted
(include foundation, stainless steel
bolts and nuts) complete with door cover,
10 Amp MCB, accessories, cable gland,
shroud, lock, information plate, internal
wiring, including necessary concrete
foundation, excavation, backfilling,
reinstatement of ground and painting
identification numbers as detailed in
Standard Drawing
Nos. EM-TC-STD-ELECT-03-TB01 to TB05
(Removal of existing lighting columns
to be measured separately) *(003 033)
L 003 NA 3 meter height post top No. 239.60 E L 3
ID : KMC/iy/ElecWorks (FY2012).xls (94) (21.10.2011) (May/147-3)
SOR Page 95
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
L 004 NA 3.5 m height post top No. 267.60 E L 4
L 005 NA 4 m height post top No. 295.60 E L 5
L 006 4.5 m height post top No. 323.50 E L 6
L 007 NA 5 m height post top No. 351.50 E L 7
L 008 NA 6 m height post top No. 379.50 E L 8
L 009 NA 8 m height post top No. 470.00 E L 9
L 010 NA 10 m height post top No. 590.00 E L 10
L 011 NA 6 m height lighting column including No. 390.00 E L 11
2 m galvanised steel single arm bracket
L 012 NA 6 m height lighting column including No. 425.60 E L 12
2 m galvanised steel double arm bracket
L 013 NA 8 m height lighting column including No. 473.90 E L 13
2 m galvanised steel single arm bracket
L 014 NA 8 m height lighting column including No. 509.50 E L 14
2 m galvanised steel double arm bracket
L 015 NA 3 m height post top lighting No. 279.00 E L 15
column in powder coat finish
L 016 NA 3.5 m height pot top lighting column in No. 307.60 E L 16
powder coat finish
L 017 NA 4 m height pot top lighting column in No. 335.60 E L 17
powder coat finish
L 018 NA 4.5 m height pot top lighting column in No. 363.50 E L 18
powder coat finish
L 019 NA 5 m height pot top lighting column in No. 391.50 E L 19
powder coat finish
L 020 NA 6 m height post top lighting column No. 419.50 E L 20
in powder coated finish
L 021 NA 8 m height post-top lighting column No. 509.50 E L 21
in powder coated finish
L 022 NA 4 m height lighting column including 1.5 m No. 305.00 E L 22
to 2 m galvanised steel single arm bracket
all in powder coated finish
L 023 NA 4.5 m height lighting column including No. 345.00 E L 23
1.5 m to 2 m galvanised steel single
arm bracket all in powder coat finish
ID : KMC/iy/ElecWorks (FY2012).xls (95) (21.10.2011) (May/147-3)
SOR Page 96
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
L 024 NA 5 m height lighting column including No. 390.00 E L 24
1.5 m to 2 m galvanised steel single
arm bracket all in powder coat finish
L 025 NA 6 m height lighting column including No. 430.00 E L 25
2m galvanised steel single arm bracket
all in powder coat finish
L 026 NA 8 m height lighting column including No. 549.00 E L 26
2m galvanised steel single arm
bracket all in powder coat finish
L 027 NA 6 m height lighting column including No. 460.00 E L 27
2m galvanished steel double arm
bracket all in powder coat finish
L 028 NA 8 m height lighting column including No. 579.00 E L 28
2m galvanished steel double arm
bracket all in powder coat finish
L 029 NA 4 m height lighting column with No. 305.00 E L 29
galvanised steel double quarter arm
bracket in powder coated finish
L 030 NA 4.5 m height lighting column with 1.5 m No. 345.00 E L 30
to 2 m galvanised steel double quarter
arm bracket all in powder coat finish
L 031 NA 5 m height lighting column with 1.5 m No. 390.00 E L 31
to 2 m galvanised steel double quarter
arm bracket all in powder coat finish
L 032 NA 6 m height lighting column with 1.5 m No. 430.00 E L 32
to 2 m galvanised steel double quarter
arm bracket all in powder coat finish
L 033 NA 6 m including 1 metre 60 dia. inclination No. 430.00 E L 33
slanted arm in powder coated finish
BRACKET AND PARTS (FOR TUBULAR
AND OCTAGONAL SECTION LIGHTING
COLUMN)
L 034 NA Hot dip galvanised steel single arm No. 95.10 E L 34
bracket to lighting column including powder
coated finish where necessary to match
existing
L 035 NA Hot dip galvanised steel double arm No. 130.00 E L 35
bracket to lighting column including powder
coated finish where necessary to match
existing
L 036 NA 80mm diameter 200mm length steel No. 29.80 E L 36
adaptor with spigot to lighting column for
mounting of post top lantern
ID : KMC/iy/ElecWorks (FY2012).xls (96) (21.10.2011) (May/147-3)
SOR Page 97
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
L 037 NA Supply and fix hot dip galvanised metal No. 24.00 E L 37
door with locking facilities to match
existing lighting column
L 038 NA "PGL" Cat No. P/BM-448 Corrosion No. 103.20 E L 38
resistant aluminium wall bracket
L 039 NA 600mm long (max) hot dip galvanised No. 35.00 E L 39
steel single banner holder with hot dip
galvanised steel ring clamp bracket
L 040 NA 600mm long (max) hot dip galvanised No. 50.00 E L 40
steel double banner holder bracket with
hot dip galvanised steel ring clamp
bracket
L 041 NA "PGL" Cat No. P/T-2 Corrosion resistant No. 263.80 E L 41
aluminium double arm bracket for post top
mounting
L 042 NA "PGL" Cat No. P/T-3 Corrosion resistant No. 308.50 E L 42
aluminium tripple arm bracket for post top
mounting
L 043 NA "WE-EF" A 50-400.60 corrosion resistant No. 225.00 E L 43
aluminium wall bracket
L 044 NA "WE-EF" AS 20-400 corrosion resistant No. 370.00 E L 44
aluminium double arm bracket for post
top mounting
L 045 NA "WE-EF" AS 30-400 corrosion resistant No. 578.00 E L 45
aluminium triple arm bracket for post
top mounting
TAPERED OCTAGONAL SECTION
LIGHTING COLUMN
* Supply, deliver to site and erect LTA
approved tappered octagonal section
lighting column column (planted type
with bitumen or coal tar epoxy coating
internally and externally up to 250mm
above ground) or flange mounted (include
foundation stainless steel bolt and nuts)
10 Amp MCB, cable gland, shroud,locks,
information plate, internal wiring,
concrete foundation, planting
identification number, all necessary
excavation backfilling and reinstatement of
ground surfaces. (Removal of existing
lighting column to be measured
separately) *(046 057)
L 046 NA 3 m height post top lighting column No. 258.00 E L 46
ID : KMC/iy/ElecWorks (FY2012).xls (97) (21.10.2011) (May/147-3)
SOR Page 98
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
L 047 NA 3.5 m height post top lighting column No. 300.00 E L 47
L 048 NA 4 m height post top lighting column No. 342.00 E L 48
L 049 NA 4.5 m height post top lighting column No. 384.00 E L 49
L 050 NA 5 m height post top lighting column No. 426.00 E L 50
L 051 NA 6 m height post top lighting column No. 468.00 E L 51
L 052 NA 8 m height post top lighting column No. 510.00 E L 52
L 053 NA 10 m height post top lighting column No. 552.00 E L 53
L 054 NA 6 m height lighting column including No. 558.00 E L 54
2 m galvanised steel single arm bracket
L 055 NA 6 m height lighting column including No. 598.00 E L 55
2 m galvanised steel double arm bracket
L 056 NA 8 m height lighting column including No. 563.00 E L 56
2 m galvanised steel single arm bracket
L 057 NA 8 m height lighting column including No. 598.00 E L 57
2 m galvanised steel double arm bracket
REMOVAL AND REPOSITION OF
EXISTING LIGHTING COLUMN
(INCLUDING BRACKET ARM AND
LANTERN)
* Remove existing lighting column from
existing postion, including excavation,
termination of cables, taking off of pole,
lantern, bracket, concrete footing,
backfilling, reinstatement of ground
surfaces, transportation to new position,
re-erect and install the lighting column at
new location including excavation new
concrete footing, backfilling, reinstatement
and connection for the following lighting
column *(058 060)
L 058 NA Not exceeding 5m high No. 91.70 E L 58
L 059 NA More than 5m hight but not exceeding 8m No. 121.00 E L 59
high
L 060 NA More than 8m but not exceeding 12m No. 185.20 E L 60
ID : KMC/iy/ElecWorks (FY2012).xls (98) (21.10.2011) (May/147-3)
SOR Page 99
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
* Remove existing lighting column including
excavation, termination of cables,
taking off of poles, lantern, bracket,
concrete footing, backfilling, reinstate
ground, transportation, disposal of surplus
earth, debris, lighting column lantern,
bracket from site for the following height
(without replacing new lamp
post) *(061 063)
L 061 NA Not exceeding 6m high No. 70.50 E L 61
L 062 NA More than 6m high but not exceeding 8m No. 89.50 E L 62
L 063 NA More than 8m but not exceeding 12m No. 119.00 E L 63
PAINTING OF LIGHTING COLUMN
Colour of paint to be determined by the
Superintending Officer)
* Prepare surface and paint one coat
approved aluminium paint to existing
lighting column including spray painting
column's indicator for the following lighting
columns *(064 067)
L 064 NA Not exceeding 5m height post top lighting No. 7.00 E L 64
column
L 065 NA More than 5m but not exceeding 10m No. 9.50 E L 65
height post top lighting column
L 066 NA 6m to 10m height street lighting column No. 11.80 E L 66
with single arm bracket
L 067 NA 6m to 10m height and above street lighting No. 12.85 E L 67
column with double arm bracket
* Prepare surface and paint two coats of
approved aluminium paint or one coat of
primer with 2 coats of synthetic enamel
paint to existing lighting column including
spray painting columns indicator for the
the following lighting columns : *(068 071)
L 068 NA Not exceeding 5m height post top lighting No. 9.50 E L 68
column
L 069 NA More than 5m but not exceeding 10m No. 12.30 E L 69
height post top lighting column
L 070 NA 6m to 12m height lighting column with No. 14.80 E L 70
single arm bracket
L 071 NA 6m to 12m height lighting column with No. 15.85 E L 71
double arm bracket
ID : KMC/iy/ElecWorks (FY2012).xls (99) (21.10.2011) (May/147-3)
SOR Page 100
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
L 072 NA Paint identification numbers (Block No./ Pole 3.50 E L 72
Switch Room No./Lamp Pole No.) with
lettering / numbering height not
exceeding 100mm height onto existing
lighting column
IMPROVEMENT TO LIGHTING
COLUMN'S BASE
L 073 NA Excavate ground section of lighting No. 18.00 E L 73
column (3 - 10m height) up to top surface
of concrete footing, treat ground section
of lighting column with approved primer
and coat surface of column from top
of concrete footing up to 300mm above
ground level with approved bituminous
coating including necessary propping,
backfilling and reinstatement works
L 074 NA Excavate base of lighting column No. 6.40 E L 74
(3 - 10m height) up to 200mm below
ground, treat exposed ground section
with approved primer and coat surface
of column from 200mm below ground
to 300mm above ground level with
approved bituminous coating including
necessary propping, backfilling and
reinstatement works
* Additional strengthening of lighting
column's base (for new lighting column
only) by grouting with non-shrink pre-
packed cement mortar as specified and
shown in drawing no. EM-TC-STD-ELEC-
03-13 for lamp post of the following
height *(075 076)
L 075 NA Not exceeding 6m height Pole 30.50 E L 75
L 076 NA Above 6m to 10m height Pole 35.00 E L 76
M. BOLLARD LIGHTING
REMOVAL OF EXISTING BOLLARD
M 001 NA Removal of existing bollards light to No 12.60 E M 1
facilitate replacement of new bollards
including reinstatement and disposal off
site
M 002 NA Grade 25 mass concrete footing not No 14.65 E M 2
exceeding 0.1m3 for bollards including
excavation, backfilling and reinstatement
M 003 NA Removal of existing bollard light including No 13.40 E M 3
removal of concrete base, reinstatement,
backfilling and disposal of off site
(without replacement of new bollard)
ID : KMC/iy/ElecWorks (FY2012).xls (100) (21.10.2011) (May/147-3)
SOR Page 101
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
BOLLARD LIGHTING
* Supply, deliver to site and install the
following Bollard lights with integral
control gear, internal wiring, cable gland,
shrouds, mounting brackets, screws,
connectors and other accessories including
necessary concrete foundation, excavation,
backfilling, reinstatement of ground and
painting identification numbers
(Removal of existing bollard to be
measured separately) *(004 035)
M 004 "ARCLUSE" ECO 8124-12 with 70W No. 357.00 E M 4
SON or 80W mercury lamp
M 005 "BOLUCE ARES" 2000 1100mm high No. 320.00 E M 5
bollard with 18W PLC lamp
M 006 "ELENCO" with 23W EL lamp No. 680.50 E M 6
M 007 "FABRIKANT" 2048 in corrosion resistant No 637.00 E M 7
die-cast aluminium alloy body, tempered
alloy body with tempered glass diffuser,
anodised high purity reflector and
70 watts metal halide lamp or 70W
CDM coolwhite or 60W/65W spiral compact
fluorescent lamp
M 008 "FABRIKANT" 2008 in corrosion resistant No 640.00 E M 8
die-cast aluminium alloy body with louvres,
aluminium post and 70 watts metal lamp
or 70W CDM coolwhite or 60W/65W
spiral compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (101) (21.10.2011) (May/147-3)
SOR Page 102
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
M 009 "FUMAGLLI" OFIR3 with antique reeded No. 718.80 E M 9
pole moulded with resin and reinforced
with steel and 3 x 20W EL lamp
M 010 "FUMAGLLI" OFIR2 with antique reeded No. 603.30 E M 10
pole moulded with resin and reinforced with
steel and 2 x 20W EL lamp
M 011 NA "IGUZZINI" PART 7293 with 18W PLC No 688.70 E M 11
lamp
M 012 NA "MARCIO" 2000 110mm high bollard No. 426.00 E M 13
luminaire with 50W metal halide lamp,
die-cast aluminium housing, lourve
guards and sand blasted diffuser
M 013 NA "MIRAGE" P1200 with die-cast aluminium No. 680.00 E M 14
body, louver, gear tray and 42W compact
fluorescent lamp/70W metal halide lamp/
70W SON sodium lamp
M 014 NA "PHILIPS" cat no. HGC 130 with opal-white No 338.00 E M 16
cube and vandal-resistant glass-fibre
reinforced polyester column with 80W
HPL-N lamp/70W SON lamp
M 015 NA "PHILIPS" cat no. HGC 131 with clear No 413.00 E M 17
cube, built-in white lacquered aluminium
louvre system and vandal-resistant
glass-fibre reinforced polyester column
with 80 - 125W HPL-N lamp/70W SON
lamp
M 016 Royal Botania Rectan bollard c/w 1x7- No 565.00 E M 35
11W compact fluorescent lamp. Body is
made of superior natural materials :
premium Javanese plantation teak,
stainless steel, granite (IP55)
M 017 Royal Botania Ellipse bollard c/w 1x7- No. 498.00 E M 36
11W compact fluorescent lamp. Body is
made of superior natural materials :
premium Javanese plantation teak,
stainless steel, granite (IP55)
ID : KMC/iy/ElecWorks (FY2012).xls (102) (21.10.2011) (May/147-3)
SOR Page 103
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
M 018 Royal Botania Neptune bollard c/w 3x7- No. 830.00 E M 37
11W compact fluorescent lamps. Body
is made of superior natural material :
stainless steel (IP55)
M 019 Royal Botania Luce-Fer bollard c/w 1x7- No. 485.00 E M 38
11W compact fluorescent lamp. Body is
made of superior natural materials :
zinc alloy, cast solid brass (IP55)
M 020 NA "SELUX" LICOL 600mm ht cat no. No 861.40 E M 18
SX 702-11-2 with 80W HPL-N lamp
M 021 NA "SELUX" LICOL 1000mm ht cat no. No 898.20 E M 19
SX 702-14/ 15-2 with 80W HPL-N 50 -
70W SON lamp
M 022 NA "SELUX" LICOL 1000mm ht louvred head No 901.10 E M 20
cat no. SX 700-19-2 with 50 - 70W SON/
80W HPL-N
M 023 NA "SELUX" LICOL 600mm ht louvred head No 857.50 E M 21
cat no. SX 700-14-2 with 50W/70W SON
lamp
M 024 NA "SELUX" LICOL 1200mm ht cat no. No 889.50 E M 22
SX 703-13-2 with 80W mercury lamp
M 025 NA "THORN" AVENUE B with 70W SON lamp No 867.20 E M 23
M 026 "WE-EF" GTY 254-E-70/NI [K] in corrosion No 760.00 E M 24
resistant die-cast aluminium alloy body
with louvres, aluminium post, and 70 watts
metal halide or 70W CDM coolwhite or
60W/65W spiral compact fluorescent lamp
M 027 "WE-EF" CRY or CTY 150-E-70/NI [K] in No 720.00 E M 25
corrosion resistant die-cast aluminium
alloy body with UV stabilized and vandal
resistant Polycarbonate diffuser, anodized
high purity reflector and 70 watts
metal halide or 70W CDM coolwhite or
60W/65W spiral compact fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (103) (21.10.2011) (May/147-3)
SOR Page 104
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
M 028 "WE-EF" GLC 150-E-70/NI [K] in corrosion No 703.25 E M 26
resistant die-cast aluminium alloy body,
with UV stabilized and vandal resistant
Polycarbonate diffuser, anodized high
purity reflector and 70 watts
metal halide or 70W CDM coolwhite or
60W/65W spiral compact fluorescent lamp
M 029 "WE-EF" VSI 254-E-50/NI [K] in corrosion No 765.00 E M 27
resistant die-cast aluminium alloy body
with one-sided light output with 70 waltts
metal halide or 70W CDM coolwhite or
60W/65W spiral compact fluorescent lamp
M 030 "WE-EF" OSS 254-T-50/NE [K] in No 820.00 E M 28
corrosion resistant die-cast aluminium
alloy body with one sided light output with
and 50 - 70 watts
metal halide or 70W CDM coolwhite or
60W/65W spiral compact fluorescent lamp
M 031 "WE-EF" DSS 259-E-50/NI [K] in corrosion No 785.00 E M 29
resistant die-cast aluminium alloy body
with one sided light output with 50 - 70
watts metal halide or 70W CDM coolwhite
or 60W/65W spiral compact fluorescent
lamp
M 032 "WE-EF" OSV 204-E-50/NI [K] in corrosion No 550.00 E M 30
resistant die-cast aluminium alloy body
with one sided light output with 50 - 70
watts metal halide or 70W CDM coolwhite
or 60W/65W spiral compact fluorescent
lamp
ID : KMC/iy/ElecWorks (FY2012).xls (104) (21.10.2011) (May/147-3)
SOR Page 105
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
M 033 "WE-EF" DSG 259-E-50/NI [K] in corrosion No 788.00 E M 31
resistant die-cast aluminium alloy body
with one sided light output with 50 -70
watts metal halide or 70W CDM coolwhite
or 60W/65W spiral compact fluorescent
lamp
M 034 "WE-EF" FTY-150-E-70/NI [K] in corrosion No. 825.00 E M 32
resistant die-cast aluminium alloy body
with UV stabilized and vandal resistant
Polycarbonate diffuser, anodized high
purity aluminium reflector and 70 watts
metal halide or 70W CDM coolwhite
or 60W/65W spiral compact fluorescent
lamp
M 035 3E VIGILE PG121 No. 1 decorative bollard No. 980.00 E M 34
luminaire with polycarbonate shock-
resistant diffuser, and 70W metal halide
or 70W CDM coolwhite
or 60W/65W spiral compact fluorescent
lamp
ID : KMC/iy/ElecWorks (FY2012).xls (105) (21.10.2011) (May/147-3)
SOR Page 106
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N. FLOODLIGHT/SPOTLIGHT/
STEPLIGHT/BURIED LIGHT
REMOVAL OF EXISTING FLOODLIGHT /
SPOTLIGHT
N 001 NA Remove existing floodlight/spotlgiht/ No. 9.80 E N 1
steplight/buried ligh fittings and dispose
of site
N 002 NA Remove existing steplight/buried light No. 18.00 E N 2
fittings including proper termination,
disposal of site and reinstatement of
ground/floor finish
FLOODLIGHT/SPOTLIGHT/STEPLIGHT/
BURIED LIGHT
* Supply, delivery to site and install the
following floodlight/spotlight/steplight/buried
ligt complete with integral control gear
including connecting wiring, mounting,
brackets, screws, connections
and other accessories (Removal of existing
floodlight/spotlight/steplight/buried light/
fittings to be measured separately)
*(N003 N092)
N 003 Arcluce ARES 8153 1x250/400 floodlight No. 773.49 E N 90
c/w die cast aluminium body, temper glass
diffuser, integral control gear and 250W
or 400W halide lamp IP66
N 004 Arcluce 8941 Powder painted anti-glare No. 110.00 E N 99
steel louvre for Arcluce Ares Floodlight
N 005 Arcluce 8922 Powder painted anti-glare No. 70.00 E N 100
steel louvre for Arcluce Ares Floodlight
N 006 Arcluce Apollo 8175 1x250/400 floodlight No. 580.00 E N 101
c/w die cast aluminium body, temper glass
diffuser, integral control gear and 250W
or 400W halide lamp IP65
ID : KMC/iy/ElecWorks (FY2012).xls (106) (21.10.2011) (May/147-3)
SOR Page 107
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 007 Arcluce Mix 3435 1x70W /150W direct / No. 750.00 E N 102
indirect floodlight c/w die cast aluminium
body, temper glass diffuser, intergal
control gear and metal halide lamp IP66
N 008 "ARCLUCE" ECO 8137 slimline floodlight No. 322.00 E N 3
(IP55), black die cast aluminium housing
with cooling fins and 70W SON or 70W
metal halide lamp
N 009 NA "BERGER & WEISER" model no. 5203 No. 46.10 E N 4
ourdoor corrosion resistant spotlight with
Par 38 cool beam 100W lamp and ground
spike
N 010 "BLAUET" 1910 recessed steplight in die No. 140.00 E N 5
cast aluminium with lourve translucent
polycarbonate diffuser with 11W PL lamp
N 011 NA "CING" CASTALDI D16/ECO steplight with No. 151.10 E N 6
9W PL/18W PLC/26W PLC lamp and high
stress resistant composite technopolymer
body
N 012 "DAIKO" DOD 75571 wall mounted spot No. 920.00 E N 7
luminaire with 150W HQI lamp and anti-
glare shield
N 013 NA DEDALO 71561 recessed uplight in No. 580.00 E N 91
stainless steel with adjustable reflector c/w
26W lamp, conventional ballast and all
accessories (Natural Aluminium)
N 014 ECTO EC-ISH 101A Wall mounted No. 195.00 E N 92
adjustable floodlight luminaire in die-cast
aluminium housing with tempered glass
diffuser and wide flood reflector c/w 70W
metal halide warm daylight lamp, integral
control gear and all accessories (Black)
ID : KMC/iy/ElecWorks (FY2012).xls (107) (21.10.2011) (May/147-3)
SOR Page 108
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 015 ECTO PHOENIX 77340 recessed uplight No. 480.00 E N 93
(IP67) in aluminium with aluminium disk c/w
10W warmwhite lamp, integral ballast and
all necessary (Natural Aluminium)+D1411
N 016 EURO SPI 150 adjustable floodlight in die- No. 690.00 E N 94
cast aluminium with 10 degree aluminium
reflector and safety tempered glass diffuser
c/w 150W metal halide warm daylight lamp,
integral control gear and all accessories
(Grey)
N 017 NA "EUROTEC" LUMEC/BOXER 1 x 250W No. 485.00 E N 9
metal halide bi-emission wall mounted
floodlight, die-cast aluminium body,
safety tempered glass with up/down
asymmetrical optical system, IP66
N 018 NA "EUROTEC" RUDD DFPAR20S 1 x No. 385.00 E N 10
35W PAR20 MH 300K floodlight with
inground control gear, hexcell glare
louver, die-cast aluminium in black zinc
coated stainless steel external hardware
and tempered glass lens, IP67
N 019 "EXTERIEUR VERT" M2 IP67 buried light, No. 386.10 E N 11
in 18 microns anodized aluminium housing
with mechanical resistance glass of 8T
or anti vandal polycarbonate 4T), FM 11W
lamp, electronic control gear
N 020 "EYELITE" WALLUX MAXI SMS-7277 No. 425.00 E N 8
heavy duty die cast aluminium luminaire
with prismatic borosilicate glass diffuser
and 70 to 150W SON or metal halide lamp
N 021 "FABRIKANT" 3026/3023/3028/3029/3024 No. 760.00 E N 12
floodlight of corrosion resistant
die-cast aluminium alloy body with
cooling fins, hinged and framed
safety glass thermal shock resistant,
stainless steel locking devices,
weatherproof and non-aging silicon
rubber gasket with RF 1-76/M/16 spigot
cap and 150/250/400 watts tubular/metal
halide lamp
N 022 "HUBBELL" MAGNULITER floodlight No. 520.30 E N 13
Cat No. MVM-0250S-116 with 250W
SON lamp and 4024C mounting bracket
ID : KMC/iy/ElecWorks (FY2012).xls (108) (21.10.2011) (May/147-3)
SOR Page 109
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 023 "HUBBELL" MINILITER floodlight Cat No. No. 382.30 E N 14
MHS-0070S-166 for 240V operation with
70W SON lamp and 4024C mounting
bracket
N 024 NA "IGUZZINI" PLATEA 7377 outdoor floodlight No. 642.10 E N 15
in die-cast aluminium, super pure
aluminium reflector with asymmetrical
beam and 70W metal halide or high
pressure sodium lamp
N 025 NA "IGUZZINI" PLATEA 7378 outdoor floodlight No. 657.70 E N 16
in die-cast aluminium, super pure
aluminium reflector with asymmetrical
beam and 150W metal halide or high
pressure sodium lamp
N 026 NA "IGUZZINI" PLATEA 7395 outdoor floodlight No. 738.20 E N 17
in die-cast aluminium, super pure
aluminium reflector with asymmetrical
beam and 250W metal halide lamp
N 027 NA "IGUZZINI" PLATEA 7379 outdoor floodlight No. 577.15 E N 18
in die-cast aluminium, super pure
aluminium reflector with flood beam
and 70W metal halide or 80W - 125W high
pressure sodium lamp
N 028 NA "IGUZZINI" PLATEA 7380 outdoor floodlight No. 612.10 E N 19
in die-cast aluminium, super pure
aluminium reflector with flood beam
and 150W metal halide or high pressure
sodium lamp
N 029 NA "IGUZZINI" PLATEA 7394 outdoor floodlight No. 677.10 E N 20
in die-cast aluminium, super pure
aluminium reflector with flood beam
and 250W metal halide lamp
N 030 NA "IGUZZINI" 182 diameter Uplighter Light No. 602.40 E N 21
Up Walk with 13W PLC lamp and die cast
aluminium frame
N 031 NA "IGUZZINI" 7188/7189 diameter Uplighter No. 717.80 E N 22
Light Up Walk with 50/80W mercury super
deluxe lamp respectively and die cast
aluminium frame
N 032 NA "IGUZZINI" 7180 diameter Uplighter Light No. 893.40 E N 23
Up Walk with 50W white SON lamp and
die cast aluminium frame
N 033 NA "IGUZZINI" 7178/7179 diameter Uplighter No. 828.40 E N 24
Light Up Walk with 35/70W metal halide
lamp and die cast aluminium frame
ID : KMC/iy/ElecWorks (FY2012).xls (109) (21.10.2011) (May/147-3)
SOR Page 110
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 034 NA "IGUZZINI" 7186/7187 diameter Uplighter No. 828.40 E N 25
Light Up Walk with 50/70W SON lamp and
die cast aluminium frame
N 035 NA "IGUZZINI" PLATEA 7382 outdoor floodlight No. 438.10 E N 26
in die cast aluminium super pure aluminium
reflector with flood beam and 70W metal
halide E27 lamp
N 036 NA "IGUZZINI" PLATEA 7384 outdoor floodlight No. 426.80 E N 27
in die cast aluminium super pure aluminium
reflector with flood beam and 80W metal
halide lamp
N 037 NA "IGUZZINI" PLATEA 7390 outdoor floodlight No. 722.65 E N 28
in die cast aluminium super pure aluminium
reflector with flood beam and 50W SON or
metal halide lamp
N 038 NA "IGUZZINI" PLATEA 7376 outdoor floodlight No. 471.40 E N 29
in die cast aluminium super pure aluminium
reflector with flood beam and 2 x 26W TCT
compact fluorescent lamp
N 039 NA "IGUZZINI" PLATEA 7385 outdoor floodlight No. 592.70 E N 30
in die cast aluminium super pure aluminium
reflector with spot beam and 70W metal
halide lamp
N 040 NA "IGUZZINI" PLATEA 7386 outdoor floodlight No. 627.60 E N 31
in die cast aluminium super pure aluminium
reflector with spot beam and 150W metal
halide lamp
N 041 NA "IGUZZINI" PLATEA 7387 outdoor floodlight No. 717.80 E N 32
in die cast aluminium super pure aluminium
reflector with blade-of-light beam and 70W
metal halide lamp
N 042 NA "IGUZZINI" PLATEA 7388 outdoor floodlight No. 753.70 E N 33
in die cast aluminium super pure aluminium
reflector with blade-of-light beam and 150W
metal halide lamp
N 043 INCASSO recessed steplight in die-cast No. 108.00 E N 95
aluminium with anti-glare louvre c/w PLC
18W warmwhite lamp and ballast (Black)
N 044 "INDALUX" 250-IQN security floodlight No. 463.00 E N 34
with die-cast aluminium housing,
borosilicate glass diffuser and 70W SON,
70W metal halide lamp or 70W CDM
coolwhite or 60W/65W spiral compact
fluorescent lamp
ID : KMC/iy/ElecWorks (FY2012).xls (110) (21.10.2011) (May/147-3)
SOR Page 111
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 045 "INDALUX 600-IZX-C/S/D/A floodlight with No. 811.00 E N 35
150W/250W/400W SON lamp/or
150W/25W/400W metal halide lamp
N 046 NA "JETS 5" 84.09.01 outdoor flooding with No. 480.00 E N 38
250W high pressure sodium lamp
N 047 KRIS LORALUX IZX-A adjustable floodlight No. 480.00 E N 96
in die cast aluminium housing with
tempered glass diffuser c/w 250W metal
halide daylight lamp, mounting bracket,
integral control gear and all accessories
mounted on 8m lighting column (Black)
N 048 KRISTAL OPTIC 500 floor set consists of 1 No. 3,500.00 E N 97
no. of IP44 wall mounted projector with
hardness c/w 500 tails of endlight
N 049 "LIGMAN" 50031 spike mounted spotlight No. 139.00 E N 39
with 80W PAR 38 lamp
N 050 Liedo OD-8272 1 x 70W/150W MH No. 520.00 E N 103
floodlight c/w die-cast aluminium and
stora-enamelled. The front cover when
opened remains suspended by a chain
IP65
N 051 NA "MARCIO" (1091) recessed step-light No. 242.00 E N 40
luminaire with 2 x 9W PL lamps, pressured
aluminium housing & guard, tempered
glass diffuser and recess box
N 052 NA "MARCIO" (4440) buried uplighter luminaire No. 982.00 E N 41
wtih 70W metal halide lamp, die-cast
aluminium housing, reflector, polyproplyene
recess-tube and toughened glass diffuser
N 053 NA "MARCIO" (4316) floodlight luminaire with No. 574.00 E N 42
70W metal halide lamp, die-cast
aluminium housing, reflector and 70W
metal halide lamp
N 054 NA "MARCIO" (4819) ground-mounted No. 642.00 E N 43
recessed luminaire with die-cast aluminium
housing, 12 windows protective guard,
thoughened glass diffuser, polypropylene
recess tube and 18W PLC lamp
ID : KMC/iy/ElecWorks (FY2012).xls (111) (21.10.2011) (May/147-3)
SOR Page 112
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 055 NA "MEYER" WM 8872-041-000 Floodlight No. 642.00 E N 46
with thermal fatigue resistant safety glass,
high gloss mirror reflector, die-cast
aluminium body & 150W metal halide lamp
N 056 NA "PHILIPS" floodlight Cat No. SWF 330 with No. 560.00 E N 47
250W/400W SON/T lamp and mounting
bracket
N 057 NA "PHILIPS" anti glare weatherproof No. 411.30 E N 48
floodlight Cat No. SNF 300 with 250W
SON/T lamp
N 058 NA "PHILIPS" anti glare weatherproof No. 499.55 E N 49
floodlight Cat No. SWF 330/SEF 330 with
250W SON/T or 400W HDL/T lamp
N 059 NA "PHILIPS" bulk head luminaire Cat No. No. 163.90 E N 50
XGC001 with prismatic diffuser, 18W SOX
lamp and mounting bracket
N 060 "SIEMENS" EUROFLOOD 701150 No. 544.20 E N 51
SICOMPACT mini floodlight with 70/150W
metal halide or high pressure sodium lamp
N 061 "SIEMENS" EUROFLOOD 250/400 No. 636.30 E N 52
SICOMPACT mini floodlight with
250/400W metal halide or high pressure
sodium lamp
N 062 "SIEMENS" SICOMPACT MINI floodlight No. 336.60 E N 53
cat. no. 5NA-747-1-2 of die-cast aluminium
housing, hammered aluminium reflector
and tempered glass lens with 70W metal
halide lamp
N 063 "SIEMENS" SICOMPACT MINI floodlight No. 351.10 E N 54
cat. no. 5NA-747-2-2 of die-cast aluminium
housing, hammered aluminium reflector
and tempered glass lens with 150W metal
halide lamp
N 064 NA "SELUX" MTR luminaire Cat No. SX 563 No. 939.90 E N 55
11-2 with 70W SON lamp, MTR 200
reflector and accessories
N 065 NA "SIMES" Art S4929 ring buried/walk over No. 375.00 E N 56
light fitting with acidated glass, die
cast aluminium body and 18W PLC-T
lamp
ID : KMC/iy/ElecWorks (FY2012).xls (112) (21.10.2011) (May/147-3)
SOR Page 113
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 066 NA "SIMES" Ring Drive/walk over Art S.4928/ No. 474.00 E N 57
4930 with thoughened clear glass
diffuser polypropylene tube for recess,
IP67 and 18W PLC-T lamp
N 067 NA "SIMES" MEGAFLAT round buried No. 704.00 E N 58
drive/walk over Art. S.4787 uplight with
70W SON or 125W metal halide lamp,
polyester powder coated cast aluminium
housing and toughened glass
N 068 NA "SIMES" MAGAFLAT round buried drive/ No. 912.00 E N 59
walk over Art. S.4790 uplight with clear
thoughened glass diffuser, polypropylene
tube for recess, IP67 and MH 150W metal
halide lamp
N 069 NA "SIMES" MEGAFLAT round buried drive/ No. 955.00 E N 60
walk over Art S.4726/4728 uplight with
1 x MH-150W/125W/70W metal halide
lamp, clear toughened clear glass diffuser,
polypropylene tube for rescess, IP67
N 070 NA "SIMES" PRADO buried drive-over with No. 188.00 E N 61
compact fluorescent lamp 10W G24d-1 die
cast aluminium body 4 windows protective
guard of 6mm thickness polypropylene
tube and polypropylene vandal proof diffuser
N 071 NA "SOLARIS" uplighter with energy saving No. 173.60 E N 62
bulb EL 20
N 072 NA "SPECTRA" SORRENTO STO No. 161.00 E N 63
S14560/S14575/ S14590 srecessed
steplight with high impact opal acrylic
lens and 18W PLC lamp
N 073 NA "SPECTRA" TRENTO S13110/S13112/ No. 928.00 E N 64
S13104/S13106/S13120/S13200/S13705/
S13210 Uplighter with high strength
borosilicate glass 70W/100W/150W metal
halide lamp or 80W/125W mercury lamp
or 70W sodium lamp
N 074 DELETED E N 65
ID : KMC/iy/ElecWorks (FY2012).xls (113) (21.10.2011) (May/147-3)
SOR Page 114
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 075 "THORLUX" AZMET 70 Floodlight with No. 420.00 E N 66
70W high pressure sodium lamp
N 076 "THORLUX" COMBO Prismatic low glare No. 720.00 E N 67
refractor luminaire with 250W/400W
sodium or 250W/400W metal halide lamp
N 077 "THORLUX" AZMET 3 Floodlight (Spigot No. 695.00 E N 68
mounted or cradle mounted) with 250W/
400W sodium or 250W/400W metal halide
lamp
N 078 "THORLUX" ENCLOSED COMBO with No. 600.00 E N 69
hinged glass cover (IP54) and 250W/
400W sodium or 250W/400W metal halide
lamp
N 079 "THORN" OT 7OT SON-Pak 7 floodlight No. 308.50 E N 70
with 70W SON lamp
N 080 "THORN" JALON G 18W PLC recessed No. 126.10 E N 71
horizontal steplight with grille and 18W
PLC lamp
N 081 "THORN" CA5000 CITYSCAPE floodlight No. 655.70 E N 72
with 250W metal halide lamp
ID : KMC/iy/ElecWorks (FY2012).xls (114) (21.10.2011) (May/147-3)
SOR Page 115
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 082 "THORN" ODW 500 halogen floodlight No. 159.00 E N 73
with K1 250W/500W linear tungsten
halogen lamp
N 083 "THORN" AFSS150T/250T or AFSK250T/ No. 371.00 E N 74
area floodlight 40 with 150W/250W SON
or metal halide lamp
N 084 "THORN" AFSS 400T/AFSK 400T/AFSC No. 394.00 E N 75
400T area floodlight 40 with 400W SON,
mercury or metal halide lamp
N 085 TRIANGLE 14380 decorative updown wall No. 85.00 E N 98
luminaire with doffuser c/w 1 x 80W
mercury super deluxe lamp for dowlight,
2 x PLL 18W lamp for uplight and all
accessories (Black)
N 086 "VINIC" 50403/50405 floodlight with die No. 502.00 E N 78
cast aluminium body, tempered glass
cover and metal halide/70W/150W high
pressure sodium lamp
N 087 "VINIC" 50601/50603/50602/50604 No. 740.00 E N 79
floodlight with die cast aluminium body,
tempered glass cover and 250 - 400W
SON/metal halide lamp
N 088 "WE-EF" FL31-T-1000/H Bi-Symmetrical No. 1,008.00 E N 80
Floodlight fitting of corrosion resistant
die-cast aluminium alloy body, hinged and
framed safety glass thermal shock
resistant, stainless steel locking devices,
weatherproof and non-aging silicon rubber
gasket. Anodized high purity aluminium
reflector, chemically brightened. Integral
control gear c/w 1000W metal halide lamp
N 089 "WE-EF" IP55 STG259-DD-13(I) or 18(I)/ No. 185.10 E N 81
STL 259-DD-13(I) or 18(I) corrosion
resistant steplight with die-cast aluminium
alloy body and frame, polycarbonate
UV-stabilized and vandal resistant diffuser,
two cable entires to facilitate through
wiring and 13W or 18W PLC lamp
ID : KMC/iy/ElecWorks (FY2012).xls (115) (21.10.2011) (May/147-3)
SOR Page 116
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 090 "WE-EF" IP55 FL520-DT-18(B) accent No. 360.00 E N 82
floodlight corrosion resistant die-cast
aluminium alloy body and frame, finish
in RAL polyester powder coat, thermal
shock resistant safety glass,
weatherproof durable silicone rubber
gasket and 18W PLC lamp
N 091 NA "WE-EF" STO 259 step light with high No. 188.00 E N 83
impact opal acrylic lens, 13W/18W PLC
lamp
N 092 NA 150/200W spot light fitting No. 27.65 E N 84
with base holder to wall or ceiling
MOUNTING BRACKET
N 093 NA Mounting bracket for 'PHILIPS' SWF 330/ No. 38.15 E N 85
SEF 330 floodlight
N 094 NA "WE-EF" MF1-A-108 steel mounting No. 142.50 E N 86
bracket for single floodlight on post top
column
N 095 NA "WE-EF" MF2-A-108 steel mounting No. 257.00 E N 87
bracket for two floodlight on post top
column
N 096 NA Steel mounting bracket for single No. 85.50 E N 88
flood light luminaire on post top column
(other than WE-EF)
N 097 NA Steel mounting bracket for two No. 133.00 E N 89
flood light luminaire on post top column
(other than WE-EF)
N 098 "Tucano" RWS300 recessed mounted wall No. 225.00 E N 104
light in cast aluminium with anti-glare louvreand backcasing c/w PLC18W lamp
N 099 "Tucano" 51163 recessed mounted wall No. 100.00 E N 105
light in cast aluminium with anti-glare louvreand backcasing c/w PLC18W lamp
N 100 "Tucano" 51173 recessed mounted wall No. 125.00 E N 106
light in cast aluminium with anti-glare louvreand backcasing c/w PLC18W lamp
N 101 "Ingo" SBN617 surface mounted floodlight in No. 480.00 E N 107
cast aluminium with tempered glass diffuser and aluminium reflector c/w 400W metal halide lamp and control gear
N 102 "Tucano" 21228 surface mounted floodlight No. 225.00 E N 108
in cast aluminium with tempered glass diffuser and aluminium reflector c/w 70W/ 150W metal halide lamp and control gear
ID : KMC/iy/ElecWorks (FY2012).xls (116) (21.10.2011) (May/147-3)
SOR Page 117
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
N 103 "CMC" Focus surface/ spike mounted uplight No. 580.00 E N 109
in cast aluminium with safety glass lens and
70W/ 150W metal halide lamp and control gear
N 104 "Tucano" MY464 floodlight in cast aluminim No. 350.00 E N 110
with clear tempered glass diffuser and 70W/ 150W metal hallide lamp and control gear
N 105 "Ingo" SBN330 surface mounted floodlight in No. 420.00 E N 111
cast aluminium with tempered glass diffuser and aluminium reflector c/w 250W metal halide lamp and control gear
N 106 "Ingo" SBN230 surface mounted floodlight in No. 285.00 E N 112
cast aluminium with tempered glass diffuser and aluminium reflector c/w 70W metal halide lamp and control gear
P. WEATHERPROOF BOX AND METAL
ENCLOSURE
P 001 NA "VYNCKIER" Superpolyrel SP 320 500 x No. 622.00 E P 1
750 x 300 mm with cover, rainhood, air
vents, handle, lock, keys and gasket for
IP55
P 002 NA "VYNCKIER" Superpolyrel SP 330 750 x No. 807.00 E P 2
750 x 300 mm with cover, rainhood, air
vents, handle, lock, keys and gasket for
IP55
P 003 NA "VYNCKIER" Superpolyrel SP 430 1000 x No. 982.00 E P 3
750 x 300 mm with cover, rainhood, air
vents, handle, lock, keys and gasket for
IP55
P 004 NA 160 x 135 x 77 mm PVC rectangular box No. 16.10 E P 4
with cover "LEGRAND" Cat No. 92106 or
other approved
P 005 NA 310 x 240 x 154 mm PVC rectangular box No. 68.00 E P 5
with hinged cover, "LEGRAND" Cat. No.
35054 or other approved
P 006 NA 85mm x 85mm x 30mm PVC rectangular No. 9.60 E P 6
box with hinged cover, "LEGRAND" Cat
No. 35054 or other approved
ID : KMC/iy/ElecWorks (FY2012).xls (117) (21.10.2011) (May/147-3)
SOR Page 118
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
P 007 NA Weatherproof pvc termination/connection No. 8.70 E P 7
box ("Legrand" or other approved)
P 008 NA Electro-galvanised steel metal enclosure No. 68.00 E P 8
for moulded case circuit breaker (MCCB)
with cover gasket and screw-in knobs or
hidden hinges with cam lock and 2 keys
P 009 NA Electro-galvanised steel metal enclosure/ No. 28.00 E P 9
box for minature circuit breaker (MCB)
with hidden hinges, cam lock and 2 keys
P 010 NA Metal box for 13/15 Amp socket outlet in No. 21.00 E P 10
powder coat finish with hidden hinges,
cam lock and 2 keys
P 011 Self-closing and locking metal box concealed No. 65.00 E P 11
door type for 13/15 Amp socket outlet in
powdercoat finish with hidden hinges,
push-on' lockset and 2 keys
P 012 NA Camlock to metal box enclosure with 2 No. 13.00 E P 12
keys
P 013 NA Push-on' lockset for self-closing and No. 24.00 E P 13
locking metal box complete with 2 keys
Q. LIGHTNING PROTECTION SYSTEM
LIGHTING CONDUCTOR TAPE
Q 001 NA 25mm x 3mm aluminium lighting m 6.00 E Q 1
conductor conductor tape with aluminium
clip and base properly secured onto wall
or roof with stainless steel screws (Furse,
Emtech, HS, Heng)
Q 002 NA 25mm x 3mm copper lighting conductor m 11.00 E Q 2
tape with brass/bronze clip and base
properly secured onto wall or roof with
stainless steel screws (Furse, Emtech,
HS, Heng)
Q 003 NA Inter connecting buried 25 x 3mm m 11.60 E Q 3
copper tape
AIR TERMINAL
Q 004 NA 16mm diameter x 300mm long taper- No. 6.10 E Q 4
pointed aluminium air terminal aluminium
air terminal base and stainless steel
screws (Furse, Emtech, HS, Heng, NSI)
ID : KMC/iy/ElecWorks (FY2012).xls (118) (21.10.2011) (May/147-3)
SOR Page 119
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
Q 005 NA 16mm diameter x 300 mm long taper- No. 22.60 E Q 5
pointed aluminium air terminal with
leaded gunmetal air terminal base
(Furse, Emtech, HS, Heng, NSI)
BI-METALLIC CONNECTOR
Q 006 NA Bi-metallic aluminium-copper connector No. 27.20 E Q 6
for lightning conductor tapes
(Furse, BICC, Cembre, Rema, Heng, HS)
EARTH ROD
Q 007 1.8m long x 16mm diameter copper-weld No. 29.10 E Q 7
earth rod with steel core driven in ground
with bronze coupling including
testing and certification by licensed
electrical worker OF technician grade
(Furse, Emtech, Heng, HS, NSI)
Q 008 NA 3.6m long x 16mm diameter copper-weld No. 47.00 E Q 8
earth mild steel 3.6m long driven in ground,
with bronze coupling including
testing with certification by licensed
electrical worker of technician grade
(Furse, Emtech, Heng, HS, NSI)
Q 009 NA Electrical joint compound for earthing No. 12.00 E Q 9
rod cap
TAPE CLAMP
Q 010 Aluminium square tape clamp suitable for No. 4.20 E Q 10
25 x 3 mm conductor size
(Furse, Heng, HS, NSI)
Q 011 NA Leaded gunmetal square tape clamp No. 8.40 E Q 11
suitable for 25 x 3 mm conductor size
(Furse, Heng, HS, NSI)
Q 012 Leaded gunmetal round test clamp No. 27.30 E Q 12
(Furse, Heng, HS, NSI)
Q 013 Approved earth rod to tape 'A' type No. 11.60 E Q 13
earthing clamp with label (Heng, HS, NSI)
Q 014 Earth clip/clamp for water pipe/gas pipe No. 2.10 E Q 14
bonding diameter 12mm - 75mm with label
EARTH ELECTRODE INSPECTION PIT
Q 015 250 x 250 x 3 mm thick hot-dipped No. 20.80 E Q 15
galvanised hinged lid inspection pit
with plastic moulded pot
(Heng, HS, NSI, Sunlight)
ID : KMC/iy/ElecWorks (FY2012).xls (119) (21.10.2011) (May/147-3)
SOR Page 120
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
Q 016 236 x 236 x 230mm polymer earth No. 29.10 E Q 16
electrode inspection pit
Q 017 NA 25mm to 50mm thick precast concrete No. 2.90 E Q 17
cover not exceeding 0.1m2 for earth
inspection pit
EXOTHERMIC WELD
Q 018 NA Exothermic welded joints for 20 x 3 mm No. 22.30 E Q 18
copper tapes - cable to steel surface
similar to Furse Type BS1 or BS2 or
Cadweld Type CW, or other approved
TESTING OF LIGHTING PROTECTION
SYSTEM
Q 019 NA Labour and equipment to conduct testing Block 38.00 E Q 19
including tracing fault in lightning
protection system, rectification of
defects where necessary (parts measured
seperately) and retesting where necessary
worker complete with certification by
licensed electrical worker of technician grade
upon completion of rectification works
(for Block having not more than
4 earthing points)
Q 020 NA Labour and equipment to conduct testing Block 54.00 E Q 20
including tracing fault in lightning
protection system, rectification of defects
where necessary (parts measured
separately) and retesting where necessary
upon completion of rectification works
complete with certification by licensed
electrical worker of technician grade
(for Block having more than
4 earthing points)
R LABOUR ONLY ITEM
* Labour only for carrying out the following
works including reinstatement transport,
equipment and establishment
charges *(001 042)
R 001 NA Replacing wiring for lamp holder including No. 3.90 E R 1
short length of wire
R 002 NA Checking defective wiring, fuse, time Job 17.80 E R 2
switch, etc in switchroom/distribution board
by skilled electrician including repair
where necessary (Parts measured
separately)
R 003 NA Checking defective lamp pole's Pole 11.30 E R 3
wiring, fuse, including tracing fault within
lamp pole and repair where necessary
R 004 NA Refixing loosen lamp cover/fitting for No. 5.70 E R 4
post top lantern
R 005 NA Dismantling single/double lamp post arm Pole 26.10 E R 5
bracket and dispose off site
R 006 NA Re-fixing single/double arm bracket to lamp Pole 26.10 E R 6
post
ID : KMC/iy/ElecWorks (FY2012).xls (120) (21.10.2011) (May/147-3)
SOR Page 121
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
R 007 NA Repositioning single/double lamp post's Pole 26.10 E R 7
arm within the same lamp post
R 008 NA Replumbing verticality of lamp post not Pole 38.00 E R 8
exceeding 5m height including excavation,
casting new concrete footing (where
necessary) painting of approved bituminous
coating to surface of ground section of
column up to 150mm above ground level
and reinstate ground on completion
R 009 NA Replumbing verticality of lamp post Pole 62.00 E R 9
exceeding 5m but not exceeding 8m height
including excavation, casting of new
concrete footing (where necessary) painting
of approved bituminous coating to surface
of ground section of column up to 300mm
above ground level and reinstate ground on
completion
R 010 NA Replumbing verticality of lamp post Pole 70.00 E R 10
exceeding 8m but not exceeding 12m
height including excavation, casting new
concrete footing (where necessary)
painting of approved bituminous coating to
surface of ground section of column up to
300mm above ground level and reinstate
ground on completion
R 011 NA Tracing underground cable fault Job 33.90 E R 11
between two lamp poles or lamp pole and
switchroom for series of lamp posts in
circuit (repair and parts measured
seperately)
R 012 NA Checking fitness of carpark lighting lantern No. 8.90 E R 12
including dismantling lantern,
replacing parts where necessary (parts
measured separately) cleaning lantern and
diffuser and refixing on completion
R 013 NA Refixing loose and fallen m 0.90 E R 13
teak battens for wiring and resecure wiring
R 014 NA Refixing loose and fallen m 0.90 E R 14
wiring/PVC trunking including supply of
additional clips where necessary
R 015 NA Refixing loose or fallen ceiling rose No. 1.00 E R 15
including the replacement of wood
plugs where necessary
R 016 NA Refixing meter/distribution No. 9.70 E R 16
board including the replacement of
wood plugs where necessary
R 017 NA Refixing loose electrical No. 2.80 E R 17
fittings and accessories including the
replacement of wood plugs where
necessary
ID : KMC/iy/ElecWorks (FY2012).xls (121) (21.10.2011) (May/147-3)
SOR Page 122
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
R 018 NA Removing existing ceiling rose and No. 4.25 E R 18
connecting short length of cable from
existing lighting point directly into
the existing light fittings inclusive of
short length of cable, trunking/conduit
and connector
R 019 NA Refixing loose 20mm/25mm diameter Job 4.40 E R 19
galvanised steel/pvc conduit pipes
including new clip, saddle clamps and
screws
R 020 NA Checking and tightening the loose Job 17.50 E R 20
cable connection for fuses, MCCB's and
busbars in the main switchboard
R 021 NA Checking and repairing No. 26.20 E R 21
defective light in community hall, market,
hawker centre other parts of building
exceeding 8m height including use of
mobile metal stagings (parts and
fittings measured separately)
R 022 NA Extra over item 021 for checking and No. 6.30 E R 22
repairing additional defective light within
the same building including shifting of
mobile metal stagings (parts and fittings
measured separately)
R 023 NA Tracing fault in entire circuit of public No. 10.50 E R 23
lightings in building block including repair
where necessary (Parts measured
separately. Rate is based on no. of fault
found in circuit and/or no. of faulty light
fittings)
R 024 NA Checking, cleaning and tightening the 1st No. 2.30 E R 24
5 nos. of loose neutral connector or line
tap/line connector including replacement
of defective screws (within same block)
R 025 NA Checking, cleaning and tightening the No. 1.40 E R 25
remaining nos. of loose neutral connector
or line tap/line connector in item 024
including replacement of defective screws
(within same block)
R 026 NA Dismantling and re-fixing illuminated No. 8.50 E R 26
Block No./Carpark Signages of
for the purpose of carrying out
repair/replacement of defective fluorescent
tubes, starters, ballasts etc inclusive of
metal stagings not exceeding 6m height
(parts and fittings measured separately)
ID : KMC/iy/ElecWorks (FY2012).xls (122) (21.10.2011) (May/147-3)
SOR Page 123
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
R 027 NA Modifying existing fluorescent light No. 5.50 E R 27
fitting for installation of electronic
ballast or low-loss ballast including
necessary wiring (Ballast
measured seperately)
R 028 NA Modifying existing post top lantern for No. 5.50 E R 42
installation of 60 or 65W self ballasted
high power compact fluorescent lamp
including necessary wiring
R 029 NA Taking down, removing and refixing No. 10.10 E R 28
ceiling fans and regulators in
new position not exceeding 200m distance
(new fan point to be measured separately)
R 030 NA Taking down, removing and refixing No. 15.50 E R 29
ceiling fans and regulators
in new position exceeding 200m distance
including transport (new fan point to be
measured separately)
R 031 NA Taking down wall fan in hawker No. 11.35 E R 30
centre or other parts of any building
clean, oil, service & refix fan to
original position after work completion
R 032 NA Checking firmness of ceiling No. 13.10 E R 31
fan bracket/hook, taking down ceiling fans
in hawker centres or other buildings as
directed, dismantle the mechanical
connecting components to check for
worn bolt/rivets, corroded hanging rod
and bolt assembly without split cotter pins
and replacing these parts if necessary,
including cleaning fans and refixing on
completion (parts and stagings exceeding
6m height measured separately)
R 033 NA DELETED E R 32
R 034 NA DELETED E R 33
R 035 NA DELETED E R 34
R 036 NA DELETED E R 35
R 037 NA DELETED E R 36
R 038 NA DELETED E R 37
ID : KMC/iy/ElecWorks (FY2012).xls (123) (21.10.2011) (May/147-3)
SOR Page 124
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
R 039 NA Repairing fallen or loose lightning Job 24.25 E R 38
conductor and reset it to its original
position including the use of securing
material, additional clips, etc. excluding
testing (1 job refers to whole block/linkway/
gateway/pavilion/link building etc)
R 040 NA Repositioning existing light fittings Point 28.00 E R 39
and lighting point with new 3 x 2.5mm2
PVC sheathed cable in new PVC trunking
including removal of exising wiring
and reinstatement (trunking run not
exceeding 10m)
R 041 NA Carrying out full discharge test on No. 5.20 E R 40
battery pack of exit/emergency light
including cleaning of exit/emergency
light's diffuser and submission of
condition report in approved format
(Rate is based on no. of exit or
emergency light)
R 042 NA Checking out full discharge test on battery No. 2.30 E R 41
pack of loose double poles MCB/Isolator
with rating 6 - 63 Amp
S. MISCELLANEOUS
S 001 NA Motor lorry (pick-up) not more than Hr 18.30 E S 1
2.5 tonne size including fuel and driver
S 002 NA Motor lorry 3 tonne size including fuel Hr 25.60 E S 2
and driver
S 003 NA Lorry driven crane type aerial platform Hr 28.80 E S 3
up to 12m reach including fuel,
operator and driver
S 004 NA Scissor lifting platform up to 12m reach Day 294.00 E S 4
including transportation to and from
site fuel, operator and driver
SCAFFOLDING
S 005 NA Erect double layer timber scaffolding m2 10.00 E S 5
compliance with safety regulations
including taking down after use
(height of scaffolding N.e. 15m high
A minimum of 5m width shall be paid)
(Measured from the base for which
scaffolding rests)
S 006 NA Erect metal scaffolding compliance with m2 21.00 E S 6
safety regulations not exceeding 15m
height including taking down after use
(Measured from the base for which
scaffolding rests)
S 007 NA Erect metal scaffolding compliance m2 23.00 E S 7
with safety regulations exceeding 15m
height but not exceeding 35m height
including taking down after use
(Measured from the base for which
scaffolding rests)
ID : KMC/iy/ElecWorks (FY2012).xls (124) (21.10.2011) (May/147-3)
SOR Page 125
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
MOBILE STAGING
S 008 NA Mobile stage compliance with safety Job 115.00 E S 8
regulations and taking down after use
(per job duration)
S 009 NA DELETED E S 9
S 010 NA Add to item S008 for labour for in Job 57.50 E S 10
dismantling, shifting to new location,
re-erection and taking down after use
S 011 NA DELETED E S 11
MISCELLEANEOUS
S 012 NA Supply and fix stainless steel screw No. 3.70 E S 12
(cyclindrical head) with washer to electro-
galvanised steel tap-off box cover
including labour for drilling holes, forming
screw tread and opening defective camlock
S 013 NA Provide 300-450mm high concrete No. 40.60 E S 13
pedestal base for weatherproof/outdoor
control box complete with mounting
screws and brackets
S 014 NA Approved powered drive masonry No. 0.50 E S 14
pin including the use of cartridges
S 015 NA Patch up openings for pipes/conduits No. 4.60 E S 15
exceeding 100mm dia but not exceeding
225mm dia. with waterproof cement and
sand (1:3) mortar to wall and floor not
exceeding 225mm thick and make good to
match existing
S 016 NA Hack through existing rc slab not Opening 7.50 E S 16
exceeding 225mm thick to form opening
not exceeding 0.03m2 for trunking and
reinstate to match existing
S 017 NA GS bracket for metal trunking fixed to No. 3.50 E S 17
ceiling or wall including ramset nails
and 2 coats of painting
S 018 NA Polarised 10 Amp rated plug and socket No. 4.60 E S 18
connector
S 019 NA 6V A.C. relay (MY2 or MY4) for aircraft No. 40.75 E S 19
warning lights consol box
S 020 NA "Exocutor" electric insect killer No. 402.50 E S 23
Model : EX16W
S 021 NA "Exocutor" electric insect killer No. 460.00 E S 24
Model : EX30W
S 022 NA "Exocutor" electric insect killer No. 517.50 E S 25
Model : EX40W
S 023 NA "Exocutor" electric insect killer No. 598.00 E S 26
Model : EX80W
S 024 NA 16W ultra violet tube for Exocutor electric No. 36.80 E S 27
insect killer, model EX16W
S 025 NA 30W ultra violet tube for Exocutor electric No. 40.25 E S 28
insect killer, model EX30W
S 026 NA 40W ultra violet tube for Exocutor electric No. 46.00 E S 29
insect killer, model EX40W
S 027 NA 80W ultra violet tube for Exocutor electric No. 49.45 E S 30
insect killer, model EX80W
ID : KMC/iy/ElecWorks (FY2012).xls (125) (21.10.2011) (May/147-3)
SOR Page 126
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
T. EXCAVATION AND TRENCHING
EXCAVATION
(Reinstatement of turf to be paid
separately unless otherwise stated)
T 001 NA Manual excavation of 300mm wide x m 5.00 E T 1
750mm deep trench for underground cable
including sand bed and backfilling
T 002 NA Mechanical excavation of 300mm wide m 7.60 E T 2
x 750mm deep trench for underground
cable including sand bed and backfilling
T 003 NA Mechanical excavation of 600mm wide m 5.20 E T 3
trench for underground cable not exceeding
750mm deep including sand bed and
backfilling
T 004 NA Mechanical excavation of 600mm wide m 8.15 E T 4
trench for underground cable exceeding
750mm deep but not exceeding 1.0m
deep including sand bed and backfilling
T 005 NA Excavate pit 1 m x 1 m x 750 mm deep No 24.90 E T 5
and backfilling and reinstatement of turf
DEMOLITION
T 006 NA Breaking up macadam road surface m 15.70 E T 6
600mm wide and not exceeding 450mm
thick for laying underground cable
including taking up pitch block base and
reinstate same on completion
T 007 NA Breaking up reinforced concrete slab mr 26.70 E T 7
min 300mm wide and not exceeding 150mm
thick for laying underground cable and
provide new reinforcement lapping to
reinstate concrete slab to match existing
on completion
T 008 NA Breaking up reinforced concrete drain m 82.90 E T 8
(exceeding 300mm deep) and reinstate
on completion to match existing
COVER PLATE
T 009 NA 1000 or 2000 x 150 x 2 mm thick UPVC m 3.70 E T 9
cable cover plates as warning or protective
cover in trench
ID : KMC/iy/ElecWorks (FY2012).xls (126) (21.10.2011) (May/147-3)
SOR Page 127
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
TURFING
T 010 NA Supply and turf good quality 25mm thick m2 2.90 E T 10
cow grass in close turfing including 125mm
thick top soil and well watering and
tendering to ensure growth of turf
U. DAYWORK
U 001 NA Labourer for miscellaneous work Hr 6.00 E U 1
U 002 NA Electrician Hr 12.50 E U 2
U 003 NA Primary Injection test for 1 No. ACB/MCCB No. 550.00 E U 3
(with earth fault/overcurrent protection) by
EMA registered testing engineer including
providing temporary electrical supply and
skilled electrician, equipment and
transportation cost - during office hours i.e.
8.00 am to 5.30 pm
U 004 NA Secondary Injection test for 1 No. ACB/MCCB No. 450.00 E U 11
(with earth fault/overcurrent protection) by
EMA registered testing engineer
providing temporary electrical supply and
skilled electrician, equipment and
transportation cost - during office hours i.e.
8.00 am to 5.30 pm
U 005 NA Primary Injection test for each additional No. 400.00 E U 4
circuit breaker (with earth fault/
overcurrent protection) within the same
switchroom as item 003
U 006 NA Secondary Injection test for each additional No. 350.00 E U 12
circuit breaker (with earth fault/
overcurrent protection) within the same
switchroom as item 004
U 007 NA Primary Injection test for 1 No. ACB/MCCB No. 700.00 E U 5
(with earth fault/overcurrent protection)
by EMA registered testing engineer
including submission of shutdown form to
Powergrid Ltd, arrangement for
shutdown etc for testing and providing
temporary electrical supply and skilled
electricians, equipment and transportation
cost - after office hours or on Saturday,
Sunday and Public Holiday
U 008 NA Secondary Injection test for 1 No. ACB/MCCB No. 600.00 E U 13
(with earth fault/overcurrent protection)
by EMA registered testing engineer
providing temporary electrical supply
and skilled electricians, equipment
and transportation cost - after office
hours or on Saturday, Sunday and
Public Holiday
U 009 NA Primary Injection test for each additional No. 550.00 E U 6
circuit breaker (with earth fault/overcurrent
protection) within the same switchroom
as item 007
U 010 NA Secondary Injection test for each additional No. 500.00 E U 14
circuit breaker (with earth fault/overcurrent
protection) within the same switchroom
as item 008
U 011 NA Application and endorsement of Form Job 142.50 E U 7
CS/5 as licensed electrical worker when
requested by Superintending Officer for
SP Services Ltd testing for electrical
extension/minor rewiring work for the
electrical installation
U 012 NA Supply of EMA Licensed Cable Jointer to Job 142.50 E U 8
carry out "Live" termination of CTS cables
at OG box
ID : KMC/iy/ElecWorks (FY2012).xls (127) (21.10.2011) (May/147-3)
SOR Page 128
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
U 013 NA Services rendered by licensed cable Hr 86.25 E U 9
detection worker for site excavation
including preparation of cable
detection report (purchase of drawings
shall be paid separately) (A minimum
of 3 hours shall be paid per job per site)
U 014 NA Application & submission to the Job 138.00 E U 10
relevant authority for approval
to commence earthworks for
excavation around high tension cable
* Diamond Coring work to RC wall, column,
beams, slab, brickwalls, etc *(015 020)
U 015 NA 50mm - 110mm dia, 75mm - 175mm depth No 33.00 E U 15
U 016 NA 50mm - 110mm dia, 176mm - 275mm depth No 50.00 E U 16
U 017 NA 125mm - 160mm dia, 75mm - 175mm depth No 57.00 E U 17
U 018 NA 125mm - 160mm dia, 176mm - 275mm depth No 85.00 E U 18
U 019 NA 175mm - 210mm dia, 75mm- 175mm depth No 86.00 E U 19
U 020 NA 175mm - 210mm dia, 176mm- 275mm depth No 135.00 E U 20
U 021 NA Mobilisation for coring works Per 300.00 E U 21
Job
REMOVAL OF EXISTING LUMINAIRE
U 022 NA Remove existing luminaire from ceiling or No. 5.00
column or wall including reinstatement
and disposal off site (new luminaire to
be measured separately)
ID : KMC/iy/ElecWorks (FY2012).xls (128) (21.10.2011) (May/147-3)
SOR Page 129
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
V. OTHERS
V 001 NA Supply & Install screw plug to existing No. 1.80 E V 2
lightning conductor tape
V 002 60W self ballasted high power compact No. 54.00 E V 7
fluorescent lamp (coolwhite/daylight)
(megamen clusterlite, Dluces Infinla)
V 003 GP-8770 posttop lantern c/w aluminium No. 550.00 E V 9
die case base, vandal/impact resistance
(20Kg/m2) uv stabilized PC diffuser
with 3 line optic lense high output
low glare c/w self ballasted 60 or 65W
high power compact fluorescent lamp
V 004 NA Supply and fix warning notice at No. 12.00 E V 10
distribution board, switchboard or
tap-off box which use old and new cable
colour coding
V 005 NA Supply and fix cable label on cable or wire No. 0.20 E V 11
for colour coding
V 006 NA Dimmer motion sensor UTS 36 11/36w No. 35.00 E V 12
PIR (Ultimate Saver or other approved)
V 007 NA DELETED E V 13
V 008 NA DELETED E V 14
V 009 NA DELETED E V 15
V 010 NA DELETED E V 16
V 011 NA DELETED E V 17
V 012 NA DELETED E V 18
V 013 NA DELETED E V 19
V 014 Ceramic metal halide lamp 35/70w with E27 No. 55.00 E V 20
base (Osram HCI PAR 20, Philips
CDM-R-PAR 20)
V 015 NA Ignitor for 35/70w ceramic metal halide No. 16.60 E V 21
lamp (Philips, Atco)
V 016 NA Magnetic ballast for 35/70w ceramic metal No. 43.00 E V 22
halide lamp (Philips, Atco)
V 017 3 ways branching connector (KAM or other No. 60.20 E V 23
approved)
ID : KMC/iy/ElecWorks (FY2012).xls (129) (21.10.2011) (May/147-3)
SOR Page 130
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
* Din Rail mount connector c/w terminal
cover (S-Team, Syntech) *(018 026)
V 018 20A 3P No. 3.50 E V 24
V 019 20A 2P No. 3.45 E V 25
V 020 30A 3P No. 4.00 E V 26
V 021 50A 3P No. 4.40 E V 27
V 022 60A 1P No. 3.70 E V 28
V 023 90A 1P No. 4.30 E V 29
V 024 130A 1P No. 5.70 E V 30
V 025 240A 1P No. 7.40 E V 31
V 026 370A 1P No. 20.00 E V 32
V 027 NA Replace base for electrical meter box No. 100.00 E V 34
including dismantling, install back all
the existing component to the new base
* Non-Dimmable Electronic Ballast
Multi-wattage (14W to 35W)
(Philips EBP, Osram QTPT5,
Vossloh-Schwabe) *(028 031)
V 028 NA 1-way No. 25.30 E V 35
V 029 NA 2-way No. 32.20 E V 36
V 030 NA 3-way No. 41.40 E V 37
V 031 NA 4-way No. 50.60 E V 38
V 032 NA DELETED E V 39
V 033 NA DELETED No. 60.00 E V 40
V 034 NA DELETED No. 690.00 E V 41
V 035 NA CDM-T G12/E27 35/70W lamp No. 42.80 E V 42
(Philips Master, Osram, GE, Sylvania)
V 036 NA DELETED E V 43
V 037 Simlite CPD230 Spike Light mounted No. 336.00 E V 44
adjustable spotlight in die-cast aluminium
housing with high corrosion resistance,
stainless steel screws with durable silicon
rubber gasket and clear toughened glass,
with Philips CDM-R 35W/830 PAR 20 30D
lamp with remote gear in weatherproof
junction box
V 038 Philips CDM-R35W/830 PAR 20 30D lamp No. 138.00 E V 45
(c/w weatherproof junction box)
V 039 Ceramic metal halide discharge lamp No. 88.00 E V 46
35 - 150W with G12/E27/RX7S base
(Osram HCI, Philips CDM or other approved)
ID : KMC/iy/ElecWorks (FY2012).xls (130) (21.10.2011) (May/147-3)
SOR Page 131
SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE
NEW LED LUMINAIRES
W 001 NA Supply and install 2ft LED Luminaire No. 65.00
(whole fitting) in compliance with IP54
including electronic control gear, plug &
socket connectors and related
accessories and wirings
W 002 NA Supply and install 2ft LED Module No. 45.00
(without the base mounting to ceiling)
in compliance with IP54
W 003 NA Supply and install 2ft base mounting to No. 20.00
ceiling only (without LED module)
W 004 NA Supply and install approved electronic No. 18.00
control gear including wirings
W 005 NA Supply and install approved plug and socket No. 2.50
connector including wirings
W 006 NA Supply and install approved motion sensor No. 20.00
W 007 NA Supply and install approved LED downlight No. 80.00
(whole fitting) including all accessories
and wirings
W 008 NA Light 10 LED Block Signage 12w c/w No. 740.00
AC/DC driver power supply and mounting
frame
W 009 NA Light 10 LED Block Signages 12w only No. 690.00
(without AC/DC driver power supply and
mounting frame)
W 010 NA Light 10 15w AC/DC driver power supply No. 54.50
W 011 NA Light 10 Dual Level Light 12w c/w driver No. 287.50
power supply and motion sensor
W 012 NA Light 10 Dual Level Light LED 12w set only No. 100.50
W 013 NA PROLED Tubular LED 16w lamp No. 83.20
(Goldwell or other approved)
W 014 NA 16w AC/DC driver power supply No. 43.00
(Goldwell or other approved)
W 015 NA LED driver (1W to 10W) No. 40.00
(Philips, Osram, GE, Vossloh-Schwabe,
Sylvania)
W 016 NA Philip Master 7W LED GU10 Lamp No. 60.00
W 017 NA LEDUS S8 45W LED Roadway Light No. 690.00
W 018 Simlite Torch Bollard SYDJ-7602 in sand No. 316.00
blasted cast aluminium body and optic
element, anti corrosion polyester
aluminium grey paint, black radial lamellar
aluminium anti-glare system, thermally
shaped polycarbonate screen with E27
1.6W cascade style LED lamp
ID : KMC/iy/ElecWorks (FY2012).xls (131) (21.10.2011) (May/147-3)