electrostatic precipitator siemens
TRANSCRIPT
-
8/9/2019 Electrostatic Precipitator Siemens
1/2
www.siemens.com/energy
Improve performance and reliability, reduce
maintenance and meet tighter air quality
standards with Siemens environmental
service and parts for electrostatic
precipitators (ESP).
Equipment deterioration, process changes,
tighter environmental regulations any or
all of these factors may require changes in
your precipitator system.
Rebuild on our experience
With our Wheelabrator air pollution control
product lines, we have over 95 years of
experience installing particulate removal
systems in a wide variety of applications:
Rigid electrode
Rigid frame
Weighted wire
Hammer rapped
Gravity impact rapped.
Major improvements, major rebuilds,
system upgrades
Whether your system needs structural or
mechanical improvements or performance
enhancements, Siemens Environmental
Systems & Services has the knowledge and
expertise to extend precipitator life and
return your system to the required
performance levels.
www.siemens.com/energy
Electrostatic Precipitator(ESP) ServiceCost-effective enhancements, upgrades and rebuilds
Installation of rigid electrodes to reduce maintenance costs and emissions
-
8/9/2019 Electrostatic Precipitator Siemens
2/2
Services tailored to your needs
Engineering analysis
Complete aftermarket services
Repairs and alterations
Retrofits and upgrades
Equipment delivery and installation
designed around your operational
schedule
Conversions to fabric filters
Performance enhancements
Improved gas distribution with
CFD modeling
Optimum plate spacing
Optimized ESP to meet new fuel
emissions requirements
Addition of Dry Sorbent Injection (DSI)
systems for acid gas or mercury control
Control system modernization
Automatic voltage controls
Improve rapping controls
Energy management systems
High-efficiency Transformer
Rectifiers (TR)
Structural/mechanical improvements Rebuild any precipitator design
Start-up and training service
Accommodate new design pressure
requirements
Service programs
Outage inspections
Scheduled maintenance
Replacement parts
24-hour parts and service hotline:1 (877) 736-3640
www.siemens.com/energy
Published by and copyright 2012:Siemens AGEnergy SectorFreyeslebenstrasse 191058 Erlangen, Germany
Siemens Energy, Inc.4400 Alafaya TrailOrlando, FL 32826-2399, USA
Environmental Systems & Services501 Grant Street
Pittsburgh, PA 15219, USATel: (412) 562 7300
For more information, contactour Customer Support Center.Phone: +49 180/524 70 00Fax: +49 180/524 24 71(Charges depending on provider)E-mail: [email protected]
Energy Service DivisionOrder No. E50001-D520-A154-X-76USPrinted in USABU 3248T IN 0812.1
All rights reserved.Trademarks mentioned in this document arethe property of Siemens AG, its af filiates, ortheir respective owners.
Subject to change without prior notice.The information in this document containsgeneral descriptions of the technical optionsavailable, which may not apply in all cases.The required technical options should therefore
be specified in the contract.
Major Rebuilds:A HaRDE ESP combines the reliability of rigid electrodes
with tumbling hammer rapping to ensure consistently high performance.
Unloading of a truck shipment of new Rigid Discharge electrodes:
Timely delivery and installation designed around your operational needs.