electronic control for single-phase electric motors (by fasar elettronica srl)
TRANSCRIPT
FASAR ELETTRONICA S.r.L. VIA CORVI 96,
60019 SENIGALLIA (AN) TEL: 071.6609805 FAX: 071.6611573
www.fasar.it - www.fasarelettronica.com [email protected]
SINGLE-PHASE INVERTER FOR SINGLE-PHASE INDUCTION MOTORS
The inverter is the technology that ensures the best energy efficiency regarding the variable flow systems realiza-
tion. Their use also allow to exploit very extended speed range and to reduce the negative effects caused by acce-
leration and deceleration transient, thus decreasing the motor’s stress.
FASAR ELETTRONICA offers two models of single-phase inverter for induction motors: the FE1018 code allows to
control motors power up to 750 W, while the FE1019 code is able to driving motors power up to 1500 W. In both
systems are implemented , to safeguards the electronic, security techniques for current overload and power
devices overheating. Appropriate acceleration and deceleration ramps reduce the motor’s stress during start-
up and stopping phases and every time is realized, by acting on the knob that is in the front panel, a sudden speed
variation.
FE1018 FE1019
Power supply Single-phase 230Vac - 50Hz
Single-phase 230Vac - 50Hz
Maximum load MOTOR
750 W 1500 W
Commands Pole switch and rotary knob
Pole switch and rotary knob
Control System with
microprocessor
Yes Yes
Size (mm) 200x180x100 200x225x100