Electrical Safety

PPT-SM-ES 2015 2

What is electricity?

• A form of energy that is carried through wires

and is used to operate machines, lights, etc.

PPT-SM-ES 2015

There are two forms of electricity…

Static electricityElectricity that gathers in one place

Current electricityElectricity that moves from one place to another

3

PPT-SM-ES 2015 4

How does electricity work?

Electrons carry electrical energy from one place to another, creating

current electricity, or an

electric current For an electric current to happen, there

must be a circuit A closed path, or loop

around which an electric current flows

Electricity is the flow of

electrons around a circuit

PPT-SM-ES 2015 5

How does electricity work?

Voltage

• A kind of electrical force that

makes electricity move through a

wire

• Measured in volts

• The bigger the voltage, the more

the current will tend to flow

PPT-SM-ES 2015 6

How does electricity work?

Current• A steady flow of electrons,

measured in amperes (or amps)

PPT-SM-ES 2015 7

How does electricity work?

• Together, voltage and

current give you electrical

power

• The bigger the voltage, the bigger the current and the more electrical power you have

PPT-SM-ES 2015

How does electricity work?

Power is a measurement of how much energy you

are using each second• Units of power X time,

often converted into a standard unit called the kilowatt hour (kWh)

8

PPT-SM-ES 2015 9

Why is electrical safety important?

Electrical incidents cause an

average of 13 days away from work because of associated injuries and usually one fatality every day

Always use caution when

working near electricity

PPT-SM-ES 2015 10

Workers are divided into two categories when working

on or near energized equipment

Qualified workers

have had training in avoiding the electrical hazards of working on or near exposed electrical parts

Unqualified workers

have little or no training working on or near premises wiring, wiring for connections to supply electricity, installation of outside conductors, and optical fiber cables

PPT-SM-ES 2015 11

What are the hazards of electricity and electrical equipment?

• Shock• Electrical arcs and blasts• Rescues• Ground faults• Extension cords• Broken or faulty equipment

PPT-SM-ES 2015

Occupations that put workers at risk of electric shock include

• Electrical and electronic engineers, assemblers, and technicians

• Electricians• Industrial machine operators• Mechanics and repairers• Painters• Riggers and roustabouts

• Stationary engineers • Welders

• And others

12

PPT-SM-ES 2015 13

Protect yourself from electricity

Follow specialized procedures in wet work areas

Use lockout/tagout

Conduct inspections

Follow assured grounding programs

Use GFCIs

Guard energized parts

PPT-SM-ES 2015

Wet Areas

• If you touch a live wire or other electrical component while

standing in even a small puddle of water, you will get

shocked

• Avoid working in wet conditions whenever possible

• Use approved electrical equipment for wet conditions and

do not stand in wet areas when operating electrical equipment

14

PPT-SM-ES 2015

Lockout/Tagout

Proper lockout/tagout procedures

protect workers from the unexpected

start-up of electrical equipment. These procedures make sure that electrical equipment is de-energized before it is repaired and protect workers against electric shock.

15

PPT-SM-ES 2015

Inspections

• Visually inspect all

electrical equipment before use

• Remove any equipment with frayed cords, missing ground prongs, cracked tool casings, etc., from service

16

PPT-SM-ES 2015 17

Assured Grounding ProgramThis includes a written program, daily visual inspections, and a method to detect a faulty grounding wire in an

extension cord or hand tool. Grounding gives a stray

current somewhere to go and keeps workers from becoming part of the circuit.

Grounding symbol

What must be grounded?

All circuits and extension cords All noncurrent-carrying metal parts Portable and semi-portable tools and equipment

unless they are double-insulated

PPT-SM-ES 2015 18

PPT-SM-ES 2015 19

Ground Fault Circuit Interrupters

• Used in wet locations, construction sites, and other high-risk areas

• Interrupt the flow of electricity within as little as 1/40 of a second to prevent electrocution

• Compare the amount of current going into electric equipment with the amount of current returning from it along the circuit conductors• If the difference exceeds 5 milliamps, the

device automatically shuts off the electric power

PPT-SM-ES 2015 20

Guarding

• Locating or enclosing electric equipment to make sure workers do not accidentally come into contact with its live parts

• Requires equipment with exposed parts operating at 50 volts or more to be placed where it is accessible

only to authorized workers qualified to work with it

PPT-SM-ES 2015

Electrical Hand ToolsDouble-insulated

• Tool is encased in plastic, which will prevent a worker from being electrocuted if the tool short circuits

• Identified with a square-within-a-square logo or the words “double-insulated” on the label

21

PPT-SM-ES 2015

Rubber insulating gloves

Matting

Blankets

Covers

Line hoses

Sleeves

Type E hard hats

FRC

There are many types of PPE specifically designed

and approved for electrical work

22

Rescue

If your coworker sustains an electrical

injury, de-energize the circuit

before getting help.

Do not try to pull someone off of the

electrical circuit.

23PPT-SM-ES 2015

PPT-SM-ES 2015 24

Safe

ty M

eetin

g Quiz

: Elec

trica

l Saf

etySign and date this quiz sheet. Circle the letter representing the correct answer to each quiz question below.

Name:©

201

5 PE

C S

afet

y, In

c.

KEY-SM-ElEctrical SafEtYPUB. aPril.16.2015

Date:

1. _____ use caution when working near electricity.

A. AlwaysB. NeverC. RarelyD. Sometimes

2. _____ is the flow of electrons around a circuit.

A. CurrentB. ElectricityC. PowerD. Voltage

3. _____ workers have little or no training working on or near electricity.

A. PipelineB. QualifiedC. RescueD. Unqualified

4. Electrical hazards include shock, electrical arcs and blasts, and _____ or faulty equipment.

A. BrokenB. Double-insulatedC. PolishedD. Secure

5. _____ is a measurement of how much energy you are using each second.

A. DistanceB. PowerC. VolumeD. Weight

6. Avoid working in _____ conditions.A. ColdB. DryC. SunnyD. Wet

7. _____ all electrical equipment before use.

A. CleanB. InspectC. LabelD. Organize

8. _____ gives a stray current somewhere to go and keeps workers from becoming part of the circuit.

A. De-energizingB. EnergizingC. GroundingD. Guarding

9. _____ tools are encased in plastic and prevent the user from getting electrocuted if the tool develops a short circuit.

A. CordedB. Double-insulatedC. Green coloredD. Grounded

10. Specially designed PPE for electrical work includes _____ insulating gloves, matting, blankets, and covers.

A. PlasticB. RubberC. SteelD. Wood

Electr

ical S

afety

Safety Meeting answer Keys: Electrical Safety Instructors: The following key shows the answers for the Electrical Safety safety meeting quiz.

© 2015 PEC

Safety, Inc.

QUiZ-SM-ElEctrical SafEtYPUB. aPril.16.2015

1. A

2. B

3. D

4. A

5. B

6. D

7. B

8. C

9. B

10. B

This is to certify that

has successfully completed thePEC Safety Meeting

Electrical Safety

Instructor Date Awarded

STUDENT ROSTER

PRINT STUDENT NAME (CLEARLY) STUDENT SIGNATURE LAST 4 SSN or DOB1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

18.

19.

20.

INSTRUCTOR NAME SAFETY MEETING DATE

SAFETY MEETING NAME COMPANY NAME

Student Instructions: Print and sign your name. Also, provide your date of birth or the last four digits of your social security number.

©2014 PEC Safety, Inc. All rights reserved.