electrical engineer

AREAS OF EXPERIENCE

Electrical Engineering(Construction)

Civil Construction

Project Management

AUTHORTIES WOKED WITH

ADDC, ADM, ADSSC, ETISALAT, DEWA

SKILLSMicrosoft officeAutoCADMS Project.Adobe PhotoshopCorel Draw.Computer assembling and software installation.

PERSONAL DETAILS

ADDRESS:

Khalidiya, Abu Dhabi U.A.E.

Tel.: +971-2-6581099

Mob.: +971-55-9653840

+971-56-2399148

E:[email protected]

DOB: 05/02/1969

Nationality: Pakistani

Current Status: Residence Visa U.A.E.

Able to Travel

U.AE. Driving Lisence

Asrar Ul Haq

Electrical EngineerPERSONAL SUMMARYA competent Electrical Engineer with comprehensive knowledge and experience of construction works (not limited to Electrical Works only) and maintenance of facilities. Moreover, a very good experience in designing of LV Installations for residential and commercial buildings, including substations. Submissions and coordination with authorities e.g. ADM, ADDC, Etisalat, ADSSC, for approvals.

I am looking for a suitable Engineering position where I can utilize my knowledge, experience and capabilities for the progress of the organization for which I work and whatever is built or produced can be used with complete comfort and reliability and the reward I get as a remuneration can bring ease and bliss in the life of the people related with me.

WORK EXPERIENCEAL RYUM CONT. & GEN. TRANS. L.L.C. ABU DHABI

Electrical Engineer 12th August 2014—Present

Designing of LV and ELV Installations conforming to ADDC, DEWA and International Regulations & Standards. Preparation of Materials and Shop Drawings submittals according to project specifications, and other contract documents for approval from the concerned authorities. Extraction of quantities from drawings and proceed for materials approvals as per contract specification and procurement. Supervision of work execution at site as per approvals, work schedules, contract specifications and local standards and regulations. Testing and Commissioning of Electrical Installations as per ITP.

Duties:

Designing of Electrical LV and ELV Installations. Preparation of Layouts, Single Line Diagrams (SLDs) and Load Schedules for LV

Installations with all the calculation e.g. breaker size, cable size, power factor correction etc.

Submission of drawings to concerned authorities for approval. Extraction of quantities from the approved drawings. Extraction of specification for the materials to be installed at site. RFQs to suppliers and manufacturers for the material required for installation with

complete details of material specifications and quantities. Preparation of comparison statement based on the prices and technical issues. Issuance of LOIs to the suppliers competitive with price and fulfil the technical

requirement. Preparation of materials submittals for approval from the concerned authorities. Coordinating with procurement department for issuance of purchase orders. Coordinating with procurement department for delivery of materials at site. Ensure the execution of works as per approved drawings and specifications. Raising RFIs to clarify design or contract issues. Testing and Commissioning of Installations as per ITP, in accordance with Local and

International Standards.

QUEEN PALACE GEN. CONT. & MAINT. L.L.C. ABU DHABI

Electrical Engineer 14th June 2006—22 July 2014

of 3

Communication Skills

Target Oriented

CREDENTIALS AND TRAININGS

Electricity Wiring Regulations Course E-1

Equivalency Certificate AutoCAD MS Project Computer Networking

CAREER LEVEL

Over 18 years’ experience

Notice Period 1 month or less

Current Salary: AED 12000

Expected Salary: AED 16000

MEMBERSHIPSEngineering Council of Pakistan member since 1995

ADDC Abu Dhabi Distribution Company registered since June 2007

Regulations and Supervision Bureau Certified and registered in June 2010

Working as an Electrical Engineer from Designing to Approvals from Concerning Authorities, Execution of the works as per approved design, specifications and other contract limitations. Preparation of work programme and evaluate sources required for each activity. Evaluation of work done and preparation of progress reports. Inspection, Testing and Commissioning and getting final approvals from the concerning authorities after completion of the works.

Duties:

Designing of L.V. & ELV distribution wiring installations for residential and commercial buildings conforming to BS and Local Standards and Regulations.

Preparation of Load Schedules. Single Line Diagrams (SLDs). Submission of the designs/plans for approvals and coordination with the

authorities e.g. ADM, ADDC, ETISALAT, ADSSC etc. for approvals. Attend permits and approval status meetings with agencies and authorities Assurance of work execution as per approved design, project specifications and

contract limitations. Preparation of ITP and Testing and Commissioning of LV Installations. Designing of Drainage, Water Supply System for different small buildings. Designing of telephone distribution networks for different small buildings. Preparation of Electrical, Drainage, Water Supply and Telephone Drawings in AutoCAD Submission of shop drawings to concerned authorities Extraction of quantities from the approved drawings. Extraction of specification for the materials to be installed at site. RFQs to suppliers and manufacturers for the material required for installation with

complete details of material specifications and quantities. Preparation of comparison statement based on the prices and technical issues. Issuance of LOIs to the suppliers competitive with price and fulfil the technical

requirement. Preparation of materials submittals for approval from the concerned authorities. Coordinating with procurement department for issuance of purchase orders. Coordinating with procurement department for delivery of materials at site. Preparation of work programme in MS Project for different projects. Evaluation of percentage of work done as per scope of work and BOQ. Site investigation, data collection, report preparation. Extracting information from drawings and preparing assignments. Review of designs and plans to ensure compliance of these with International and

Local Standards and Regulations. Assurance of work progress to follow work schedule Use of ACONEX to share documents, transmittals and project information.

ELECTRICITY DEPARTMENT OF AJ&K, PAKISTAN

Assistant Electrical Engineer 10th November 1995—1st January 2006

Worked as an Assistant Electrical Engineer for a Power Distribution Utility, responsible for distribution of secondary distribution supply 11000/415 volts. Erection & maintenance of the distribution lines and maintenance & installation of 11000/415 volts transformers.

Duties:

Installation and maintenance of 11K/415V substations and related protection and control devices

Distribution lines and regarding calculations Data Collection and report preparation Energy meter installation and regarding calculations and testing Supervision of a team of technical staff for smooth distribution of power LV overhead lines erection and maintenance

of 3

Power factor correctionKEY SKILLS AND COMPETENCIES

Fully conversant with Microsoft office, AutoCAD and software calculation tools. Working knowledge and experience of AutoCAD. Working knowledge and experience of Microsoft Office software packages. Good verbal and written communication skills. MS Project. Adobe Photoshop, Corel Draw. Computer assembling and software installation.

ACADEMIC QUALIFICATIONS

B.Sc. Electrical Engineering (Electronics)

U.C.E.T. Mirpur AJK 1991-1995 (PEC ELECT/13804)

Final Year Percentage: 88%

F.Sc Pre-Engineering

AJK Board of Intermediate & Secondary Education 1986 -1988 Marks 79%

CO-CURRICULAR ACTIVITIES

Player of Snooker Player of Cricket Gardening

Linguistic Skills

English Urdu Punjabi Arabic

References: Available on request

of 3

electrical engineer

Documents