CAPACITORElectrical Apparatus Capacitor

Metallized Polyester Film Capacitor

Metallized Polyopropylene Film Capacitor

High Reliability DF Capacitor

www.hs-condenser.com

Since 1978www.hs-condenser.com

경기 하남시 대성로 6 (우편번호: 13020)Tel : 031-792-7701 Fax : 031-792-7703

(주)한신콘덴서

(주)한신콘덴서

2018. 10

2|HAN SIN CONDENSER www.hs-condenser.com|3

저희 한신콘덴서 제품을 이용해주시는 고객님들께

깊은 감사를 드립니다.

40여년간 필름콘덴서 하나만 고집해온 한신콘덴서

는 통신용으로 출발하여 AC 전기기기용 콘덴서를

비롯해 Snubber용, 의료기용 등 기타 다양한 영역

으로 사업을 확장해 나가고 있습니다.

이 모든 것은 고객 여러분께서 아껴주시고 도와주

신 덕택이며, 지속적인 연구개발로 최고의 품질과

신속한 생산으로 앞으로도 여러분과 함께 호흡하며

뛰겠습니다.

끝으로, 고객 여러분의 만족을 한신콘덴서의 사업

목표로 삼고, 항상 깨어 움직이는 한신콘덴서가 되

도록 노력하겠습니다.

감사합니다.

C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20180510- E210322

Report Reference E210322 -20000627 Issue Date 2018-MAY-10

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

Issued to: HAN SIN CONDENSER CO LTD 417-4 HASACHANG-DONG HANAM-SI KYUNGKI-DO 465-090 KOREA

This is to certify thatrepresentative samples of

COMPONENT - CAPACITORS, CONSTRUCTION ONLY Capacitors, Construction Only, Cat. No. HSC.

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 810, CapacitorsCSA C22.2 No. 190. Capacitors for Power Factor Correction

Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.

The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:

, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC.

Look for the UL Certification Mark on the product.

C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20180510- E247090

Report Reference E247090-20040910Issue Date 2018-MAY-10

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 1

Issued to: HAN SIN CONDENSER CO LTD 417-4 HASACHANG-DONG HANAM-SI KYUNGKI-DO 465-090 KOREA

This is to certify thatrepresentative samples of

COMPONENT - CAPACITORS Capacitors, Dry Film Protected, HSC Capacitor Series(rectangular type) .

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 810, CapacitorsCSA C22.2 No. 190. Capacitors for Power Factor Correction

Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.

The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:

, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC.

Look for the UL Certification Mark on the product.

HSC Series

KS 인증서

CQC인증서(영문)

TUV 인증서

CQC인증서(영문)

UL인증서

CQC인증서(중문)

UL인증서

CQC인증서(중문)

연구개발전담부서 인정서

이노비즈확인서

H

W T

전압(VAC) 250 300 350 400 440/450 500 600

크기(mm) W x T x H W x T x H W x T x H W x T x H W x T x H W x T x H W x T x H

용량(㎌)

0.1 31 x 12 x 23 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24

0.5 31 x 12 x 23 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24

1 31 x 12 x 23 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 14 x 25 38 x 16 x 27 38 x 20 x 30

1.5 31 x 12 x 23 38 x 13 x 24 38 x 13 x 24 38 x 13 x 24 38 x 14 x 25 38 x 18 x 30 48 x 20 x 32

2 31 x 12 x 23 38 x 13 x 24 38 x 14 x 25 38 x 14 x 25 38 x 16 x 27 48 x 18 x 28 48 x 22 x 35

2.5 38 x 13 x 24 38 x 14 x 25 38 x 16 x 27 38 x 16 x 27 48 x 17 x 28 48 x 20 x 32 50 x 25 x 40

3 38 x 13 x 24 38 x 14 x 25 48 x 17 x 28 48 x 17 x 28 48 x 17 x 28 48 x 22 x 35 58 x 25 x 40

4 38 x 14 x 25 38 x 16 x 27 48 x 17 x 28 48 x 17 x 28 48 x 22 x 35 50 x 25 x 40 58 x 25 x 40

5 38 x 16 x 27 48 x 17 x 28 48 x 20 x 32 48 x 20 x 32 58 x 21 x 34 58 x 25 x 40 58 x 30 x 44

6 48 x 17 x 28 48 x 17 x 28 48 x 22 x 35 48 x 22 x 35 58 x 21 x 34 58 x 25 x 40 58 x 33 x 45

7 48 x 17 x 28 48 x 20 x 32 50 x 25 x 40 50 x 25 x 40 58 x 25 x 40 58 x 30 x 44 58 x 33 x 45

8 48 x 20 x 32 48 x 20 x 32 58 x 25 x 40 58 x 25 x 40 58 x 25 x 40 58 x 33 x 45

9 48 x 20 x 32 48 x 22 x 35 58 x 25 x 40 58 x 25 x 40 58 x 30 x 44 58 x 33 x 45

10 48 x 20 x 32 58 x 21 x 34 58 x 25 x 40 58 x 25 x 40 58 x 30 x 44 58 x 33 x 45

11 48 x 22 x 35 58 x 21 x 34 58 x 25 x 40 58 x 25 x 40 58 x 30 x 44

12 48 x 22 x 35 58 x 25 x 40 58 x 30 x 44 58 x 30 x 44 58 x 33 x 45

13 58 x 21 x 34 58 x 25 x 40 58 x 33 x 45 58 x 33 x 45 58 x 33 x 45

14 58 x 21 x 34 58 x 25 x 40 58 x 33 x 45 58 x 33 x 45

15 58 x 25 x 40 58 x 25 x 40 58 x 33 x 45 58 x 33 x 45

16 58 x 25 x 40 58 x 25 x 40 58 x 33 x 45 58 x 33 x 45

17 58 x 25 x 40 58 x 30 x 44

18.5 58 x 25 x 40 58 x 30 x 44

19 58 x 25 x 40 58 x 33 x 45

20 58 x 25 x 40 58 x 33 x 45

22 58 x 30 x 44 58 x 33 x 45

25 58 x 30 x 44

30 58 x 33 x 45

* 상기 규격표에 기재된 시방치수는 변경될 수 있으므로 발주시 꼭 확인해 주시기 바랍니다.

제 원 •Self-healing •사각수지 case •epoxy molding •187단자 또는 L/W •취부고리 유,무 •KS, UL, TUV 인증표시

4|HAN SIN CONDENSER www.hs-condenser.com|5

Dipping Type & Tape Type Series

제 원 •Self-healing •원형 수지 case •epoxy molding •L/W, 187단자, 250단자 •KS, TUV 인증표시 H

D ø

전압(VAC) 250 300 350 400 440/450 500 600

크기(mm) W x T x H W x T x H W x T x H W x T x H W x T x H W x T x H W x T x H

용량(㎌)

1 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51

2 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51

3 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 35 x 61

4 30 x 51 30 x 51 30 x 51 30 x 51 30 x 51 35 x 61 40 x 61

5 30 x 51 30 x 51 30 x 51 30 x 51 30 x 61 35 x 61 40 x 61

6 30 x 51 30 x 51 30 x 51 30 x 51 30 x 61 40 x 61 40 x 71

7 30 x 51 30 x 51 30 x 61 30 x 61 35 x 61 40 x 61 45 x 61

8 30 x 51 30 x 51 35 x 61 35 x 61 35 x 61 40 x 61 45 x 71

9 30 x 51 30 x 61 35 x 61 35 x 61 40 x 61 45 x 61 50 x 85

10 30 x 51 30 x 61 35 x 61 35 x 61 40 x 61 45 x 71 50 x 85

15 30 x 61 35 x 61 40 x 61 40 x 61 45 x 61 50 x 85

20 40 x 61 40 x 61 40 x 71 45 x 71 45 x 81

25 40 x 61 45 x 61 45 x 71 45 x 71 50 x 85

30 40 x 61 45 x 61 50 x 85

35 45 x 61 50 x 71

HSC04 Series제 원 •Self-healing •원형 Aluminium case •WAX 또는 epoxy molding •187, 250단자 또는 L/W •KS 인증표시

H

D ø

전압(VAC) 250 300 350 400 440/450 500 600

크기(mm) W x T x H W x T x H W x T x H W x T x H W x T x H W x T x H W x T x H

용량(㎌)

0.5 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45

1 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45

1.5 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 55

2 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 55

2.5 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 35 x 55

3 30 x 45 30 x 45 30 x 45 30 x 45 30 x 45 30 x 55 35 x 55

4 30 x 45 30 x 45 30 x 45 30 x 45 30 x 55 30 x 65 35 x 65

5 30 x 45 30 x 45 30 x 55 30 x 55 30 x 65 35 x 65 40 x 65

6 30 x 45 30 x 55 30 x 55 30 x 55 30 x 65 35 x 65 40 x 75

7 30 x 45 30 x 55 30 x 65 30 x 65 35 x 65 35 x 65 40 x 85

8 30 x 45 30 x 55 35 x 65 35 x 65 35 x 65 40 x 65 45 x 75

9 30 x 55 30 x 65 35 x 65 35 x 65 40 x 65 40 x 65 45 x 85

10 30 x 55 30 x 65 35 x 65 35 x 65 40 x 65 40 x 75 45 x 85

11 30 x 55 35 x 55 35 x 65 35 x 65 40 x 65 40 x 75 50 x 75

12 30 x 65 35 x 55 40 x 65 40 x 65 40 x 65 40 x 85 50 x 85

13 30 x 65 35 x 65 40 x 65 40 x 65 45 x 65 40 x 85 50 x 85

14 30 x 65 35 x 65 40 x 65 40 x 65 45 x 65 45 x 75

15 30 x 65 35 x 65 40 x 65 40 x 65 45 x 65 45 x 75

16 35 x 65 40 x 65 40 x 65 40 x 65 45 x 65 45 x 85

17 35 x 65 40 x 65 40 x 75 40 x 75 45 x 75 45 x 85

18.5 35 x 65 40 x 65 40 x 75 40 x 75 45 x 75 50 x 75

19 35 x 65 40 x 65 40 x 75 40 x 75 45 x 75 50 x 75

20 35 x 65 40 x 65 40 x 75 40 x 75 45 x 85 50 x 85

22 40 x 65 40 x 65 45 x 75 45 x 75 45 x 85

25 40 x 65 45 x 65 45 x 75 45 x 75 50 x 85

30 40 x 65 45 x 65 45 x 85 45 x 85 50 x 85

35 45 x 65 45 x 85 50 x 85 45 x 85 50 x 130

40 45 x 65 45 x 85 50 x 85 50 x 110 50 x 130

50 50 x 65 50 x 85

60 50 x 65

70 50 x 65 씨밍타입은 35Φ부터 제작

* 상기 규격표에 기재된 시방치수는 변경될 수 있으므로 발주시 꼭 확인해 주시기 바랍니다.

각종특수콘덴서 주문제작

전기, 전자, 통신 회로용 콘덴서로 소자외관을 Epoxy로 몰딩 또는 Tape로 벤딩한 콘덴서입니다.

* 상기 규격표에 기재된 시방치수는 변경될 수 있으므로 발주시 꼭 확인해 주시기 바랍니다.

HSC06 Series

6|HAN SIN CONDENSER www.hs-condenser.com|7

-40

+6

+4

-4

+2

-2

0

+40 +60 +80 +100

Temperature(˚C)

Cap

acita

nce

Cha

nge(

%)

Cap

acita

nce

Cha

nge(

%)

Survival rate

Surv

ival

rate

Capacitance loss

Cap

acita

nce

loss

(%)

Operating time (Hr)

★ Spec : 8μF / OPP 7μm

Cap

acita

nce

loss

(%)

(%)

+120-20 +200

0

1

100

80

60

40

20

0

0

-1

-2

-3

-4

0

-1

-2

-3

-4

-5

-6250 500 700 1000

Zn 100%

Al 2%

Al 5%

Al 10%

Al 15%

Al 100%

1 2 3 4 5

100

-1

+1

MPP

MPP

MPET

MPET

MPET

-40

1.0

0.25

0.025

0.1

0.01

+40 +60 +80 +100

Temperature(˚C)

Frequency: 1kHz

Frequency (kHz)

Al metal layer resistance (Ω/□)

Dis

sipa

tion

Fact

or(%

)D

issi

patio

n Fa

ctor

(%)

+120-20 +200

MPP

0.1

1.0

1 1010 100

0.01MPP

MPET

Frequency (kHz)

★ Test Condition : 500VAC 80˚C

Temperature Characteristic

Frequency Characteristic

Survival Rate and CapacitanceLoss versus Surface Resistance

Capacitance Reduction to theProportion AI.

1. 규격

2. 내전압

3. 정격전류

I 정격전류(A)

f 정격주파수(Hz)

C 정격용량(㎌)

U 정격전압(V)

I = 2πfCU x 10-6

Capacitor 특성Capacitor Performance Characteristics

항 목 규 격

정격주파수 (Hz) 50, 60

정격전압 (v) 1000V 이하

정격용량 (㎌) 0.1 ~ 120

사용온도범위 (℃) -25 ~ +85

용량의허용차 (%) ±5(J), -5+10(U), ±10(K)

절연저항 (㏁) 단자일괄과 케이스 사이 2,000㏁ 이상 (20℃, DC500V, 60sec)

손실율 (%) MPET 0.3% MAX. MPP 0.15% MAX(20℃, 60Hz)

관련규격 KS C 4805 IEC 60252

시험온도 20 ± 2℃ 15℃ ~ 35℃ (기준 20℃)

단자상호간 SH

전동기용 1.75Un 유럽 AC2.0Un60초

10초(형식) 1초(인수, 인도) 인수, 인도 시험은 2초로 가능

방전등용 1.5Un 10초 미국, 캐나다, 일본 AC1.75Un10초

인수, 인도시험은 1초로 가능

일괄단자와 케이스 사이

150V 이하 1000V 2Un + 1000V 10초 (최저 2000V)

150V 초과 2Un + 1000V (최저 2000V) 인수, 인도 시험은 2초 가능 (유럽)

방전등용 60초 인수, 인도 시험은 1초로 가능 (미국, 캐나다, 일본)